Commit graph

534,192 commits

Author SHA1 Message Date
Mauro Carvalho Chehab
3d263114c4 [media] cx231xx: enable the analog tuner at buffer setup
buf_prepare callback is called for every queued buffer. This is
an overkill. Call it at buf_setup, as this should be enough.

Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-26 08:45:25 -03:00
Mauro Carvalho Chehab
7e2b41e912 [media] cx231xx: Improve the media controller comment
There are two problems at the comment:
- it is badly idented;
- its comment doesn't mean anything.

Fix it.

Requested-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-26 08:45:01 -03:00
Mauro Carvalho Chehab
18e8d630cc [media] cx25840: better document the media controller TODO
Analog video inputs are the tuner, plus composite, svideo, etc,
 e. g. the input pat should actually be like:

                ___________
TUNER --------> |         |
                |         |
SVIDEO .......> | cx25840 |
                |         |
COMPOSITE1 ...> |_________|

(in the above, dashes represent the enabled link, and periods
represent the disabled ones)

In other words, if we want to properly represent the pipeline,
it should be possible to see via the media controller if the tuner
is being used as an image source, or if the source is something else.

I didn't map those other inputs here yet, due to a few things:
- The extra inputs would require subdevs that won't be controlled
- I was in doubt about the best way for doing that
- That would likely require some extra setup for cx25840 caller
  drivers, in order to represent what of the possible internal
  inputs are actually used on each specific board

Actually, at least for now, I was unable to see much benefit
on adding such map now, so let's just document it, as this could
be added later on, as needed.

Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-26 08:44:40 -03:00
Mauro Carvalho Chehab
e4fd3bc504 [media] dvb core: rename the media controller entities
Prefix all DVB media controller entities with "dvb-" and use dash
instead of underline at the names.

Requested-by: Hans Verkuil <hans.verkuil@cisco.com>

Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-26 08:44:19 -03:00
Mauro Carvalho Chehab
daf77bd9c2 [media] tuner-core: fix compilation if the media controller is not defined
drivers/media/v4l2-core/tuner-core.c:440:7: error: 'struct v4l2_subdev' has no member named 'entity'
     t->sd.entity.name = t->name;

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-26 08:44:04 -03:00
Mauro Carvalho Chehab
63ba8c7518 [media] cx231xx: fix compilation if the media controller is not defined
drivers/media/usb/cx231xx/cx231xx-cards.c: In function ‘cx231xx_usb_probe’:
drivers/media/usb/cx231xx/cx231xx-cards.c:1589:15: error: ‘struct v4l2_device’ has no member named ‘mdev’
  dev->v4l2_dev.mdev = dev->media_dev;
               ^
drivers/media/usb/cx231xx/cx231xx-cards.c:1589:26: error: ‘struct cx231xx’ has no member named ‘media_dev’
  dev->v4l2_dev.mdev = dev->media_dev;
                          ^
scripts/Makefile.build:257: recipe for target 'drivers/media/usb/cx231xx/cx231xx-cards.o' failed

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-26 08:43:49 -03:00
Mauro Carvalho Chehab
c1bd57d30b [media] dvb-frontend: remove a warning
if CONFIG_MEDIA_CONTROLLER_DVB is not selected, it is now
producing this warning:

drivers/media/dvb-core/dvb_frontend.c: In function ‘dvb_frontend_thread’:
drivers/media/dvb-core/dvb_frontend.c:695:6: warning: unused variable ‘ret’ [-Wunused-variable]
  int ret;
      ^

Reported-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-26 08:43:29 -03:00
Hans Verkuil
7e182f7898 [media] media.h: mark alsa struct in media_entity_desc as TODO
The alsa struct in struct media_entity_desc is now marked as deprecated.
However, the alsa struct should remain as it is since it cannot be replaced
by a simple major/minor device node description. The alsa struct was designed
to be used as an alsa card description so V4L2 drivers could use this to expose
the alsa card that they create to carry the captured audio. Such a card is not
just a PCM device, but also needs to contain the alsa subdevice information,
and it may map to multiple devices, e.g. a PCM and a mixer device, such as the
au0828 usb stick creates.

This is exactly as intended and this cannot and should not be replaced by a
simple major/minor.

However, whether this information is in the right form for an ALSA device such
that it can handle udev renaming rules as well is another matter. So mark this
alsa struct as TODO and document the problems involved.

Updated the documentation as well to reflect this and to add the 'major'
and 'minor' field documentation.

Updated the documentation to clearly state that struct dev is to be used for
(sub-)devices that create a single device node. Other devices need their own
structure here.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-26 08:40:10 -03:00
Wang Nan
b4d8327024 x86/traps: Enable DEBUG_STACK after cpu_init() for TRAP_DB/BP
Before this patch early_trap_init() installs DEBUG_STACK for
X86_TRAP_BP and X86_TRAP_DB. However, DEBUG_STACK doesn't work
correctly until cpu_init() <-- trap_init().

This patch passes 0 to set_intr_gate_ist() and
set_system_intr_gate_ist() instead of DEBUG_STACK to let it use
same stack as kernel, and installs DEBUG_STACK for them in
trap_init().

As core runs at ring 0 between early_trap_init() and
trap_init(), there is no chance to get a bad stack before
trap_init().

As NMI is also enabled in trap_init(), we don't need to care
about is_debug_stack() and related things used in
arch/x86/kernel/nmi.c.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: <dave.hansen@linux.intel.com>
Cc: <lizefan@huawei.com>
Cc: <luto@amacapital.net>
Cc: <oleg@redhat.com>
Link: http://lkml.kernel.org/r/1424929779-13174-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-26 12:29:20 +01:00
Ingo Molnar
0afb170401 perf/core improvements and fixes:
New user selectable features:
 
 - Support recording running/enabled time in 'perf record' (Andi Kleen)
 
 - New tool: 'perf data' for converting perf.data to other formats,
   initially for the CTF (Common Trace Format) from LTTng (Jiri Olsa, Sebastian Siewior)
 
 User visible:
 
 - Only insert blank duration bracket when tracing syscalls in 'perf trace' (Arnaldo Carvalho de Melo)
 
 - Filter out the trace pid when no threads are specified in 'perf trace' (Arnaldo Carvalho de Melo)
 
 - Add 'perf trace' man page entry for --event (Arnaldo Carvalho de Melo)
 
 - Dump stack on segfaults in 'perf trace' (Arnaldo Carvalho de Melo)
 
 Infrastructure:
 
 - Introduce set_filter_pid and set_filter_pids methods in the evlist class (Arnaldo Carvalho de Melo)
 
 - Some perf_session untanglement patches, removing the need to pass a
   perf_session instance for things that are related to evlists, so that
   tools that don't deal with perf.data files like trace in live mode can
   make use of the ordered_events class (Arnaldo Carvalho de Melo)
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJU7j2lAAoJEBpxZoYYoA71cxcH/2dqKGTtqucEgKwpOdo8uf5v
 uWFtLzHNxJXYYm1kpwxOj3aMIoEfyfTngLgumgzMVdeQ8+rZGWgF7FMz2Gdn0HJi
 5CWrT/keZz8iHxA6BI8NBAa4uO8ct4MHjHSsYuO8Fr4zQmQy9vprfl8D44BQFQr9
 6C35dTjP8chIUFLxL2Y5Wr1SATeZf+zJJVoGUES1xgk7iMCfgivg6vSQcGmgBbe6
 iJBqDpO+10j55X578d5WRV0UMKrHk25RdGBRaB9eA0KowJfKYva744coF7AHOoQR
 snc5Ti93w+ssTL6PSp+FFr81kJVOqQk2GaweMcnNpOP5A8SSS+47yicPUZ25Nng=
 =wb9I
 -----END PGP SIGNATURE-----

Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

New user selectable features:

  - Support recording running/enabled time in 'perf record' (Andi Kleen)

  - New tool: 'perf data' for converting perf.data to other formats,
    initially for the CTF (Common Trace Format) from LTTng (Jiri Olsa, Sebastian Siewior)

User visible changes:

  - Only insert blank duration bracket when tracing syscalls in 'perf trace' (Arnaldo Carvalho de Melo)

  - Filter out the trace pid when no threads are specified in 'perf trace' (Arnaldo Carvalho de Melo)

  - Add 'perf trace' man page entry for --event (Arnaldo Carvalho de Melo)

  - Dump stack on segfaults in 'perf trace' (Arnaldo Carvalho de Melo)

Infrastructure changes:

  - Introduce set_filter_pid and set_filter_pids methods in the evlist class (Arnaldo Carvalho de Melo)

  - Some perf_session untanglement patches, removing the need to pass a
    perf_session instance for things that are related to evlists, so that
    tools that don't deal with perf.data files like trace in live mode can
    make use of the ordered_events class (Arnaldo Carvalho de Melo)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-26 12:25:20 +01:00
Ingo Molnar
e9e4e44309 Linux 34.0-rc1
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJU6pFJAAoJEHm+PkMAQRiG2OwH/24nDK+l9zkaRs0xJsVh+qiW
 8A2N1od0ickz43iMk48jfeWGkFOkd4izyvan/daJshJOE1Y5lCdSs7jq/OXVOv9L
 G0+KQUoC5NL0hqYKn1XJPFluNQ1yqMvrDwQt99grDGzruNGBbwHuBhAQmgzpj1nU
 do8KrGjr7ft1Rzm4mOAdET/ExWiF+mRSJSxxOv598HbsIRdM5wgn0hHjPlqDxmLN
 KH4r3YYEm0cHyjf4Krse0+YdhqdamRGJlmYxJgEsYNwCoMwkmHlLTc71diseUhrg
 r/VYIYQvpAA6Yvgw8rJ0N5gk/sJJig+WyyPhfQuc2bD5sbL9eO7mPnz2UP7z7ss=
 =vXB6
 -----END PGP SIGNATURE-----

Merge tag 'v4.0-rc1' into perf/core, to refresh the tree

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-26 12:24:50 +01:00
Miklos Szeredi
aa991b3b26 fuse: set stolen page uptodate
Regular pipe buffers' ->steal method (generic_pipe_buf_steal()) doesn't set
PG_uptodate.

Don't warn on this condition, just set the uptodate flag.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: stable@vger.kernel.org
2015-02-26 11:45:47 +01:00
Miklos Szeredi
0d2783626a fuse: notify: don't move pages
fuse_try_move_page() is not prepared for replacing pages that have already
been read.

Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: stable@vger.kernel.org
2015-02-26 11:45:47 +01:00
Tomi Valkeinen
fe59e5cf4a OMAPDSS: workaround for MFLAG + NV12 issue
It was found that having two displays enabled and having an NV12 overlay
on one of the displays will cause underflows/synclosts. Debugging this
pointed to some issue with MFLAG.

It is unclear why this issue is happening, but it looks like there is a
HW bug related to MFLAG and FIFO management. Disabling MFLAG makes this
issue go away, but then we lose the benefit of MFLAG. Also forcing MFLAG
always on makes the issue go away.

Also, using certain values for MFLAG_START, MFLAG thresholds and PRELOAD
makes the issue go away, but there was no obvious logic to which values
work and which don't.

As a workaround until more information about this is found, force MFLAG
always on to make NV12 usable.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-26 12:15:14 +02:00
Tomi Valkeinen
c64aa3a660 OMAPDSS: Add support for MFLAG
OMAP5 has support for MFLAG feature, which allows DSS to dynamically
increase the priority of DISPC's DMA traffic. At the moment we don't
have support for it.

It was noticed that on DRA7 with high bandwidth use cases we see FIFO
underflows. Implementing MFLAG support removed those underflows.
Interestingly, on OMAP5 uEVM no such overflows were seen.

This patch adds a simple MFLAG implementation, where we use a fixed
MFLAG threshold value based on the FIFO size. The thresholds are set to
4/8 of fifo size for low threshold, and 5/8 of fifo size for high
threshold.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-26 12:15:14 +02:00
Tomi Valkeinen
47fc469b3a OMAPDSS: setup default fifo thresholds
At the moment we don't setup FIFO thresholds by default in omapdss. It's
supposed to be done by the user of omapdss. And that is missing from
omapdrm, causing unoptimal thresholds to be used when using omapdrm.

While I believe it's in theory better to allow the user of omapdss to
setup the fifo thresholds, in practice we always use the same values,
and we could as well setup the thresholds in omapdss.

Furthermore, in omapdss init we always swap the FIFO used for GFX and WB
overlays, but we don't swap the FIFO thresholds for those overlays
(which is the reason for omapdrm using unoptimal HW reset values). So
it would make sense to setup the thresholds to account for the swapping
of the FIFOs.

So, this patch adds code to setup default FIFO tresholds at omapdss
init.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-26 12:15:13 +02:00
Tomi Valkeinen
d49cd15550 OMAPDSS: DISPC: lock access to DISPC_CONTROL & DISPC_CONFIG
Dispc driver presumes that the callers handle locking for all normal
functions. However, omapdrm doesn't handle this, and presumes that all
overlay manager registers are private to that overlay manager, and thus
presumes that configurations for overlay managers can be written via
different threads freely.

For many registers the above is true. The exceptions are DISPC_CONTROL
and DISPC_CONFIG registers, which contain bits for both LCD and TV
overlay managers.

Fixing this properly in omapdrm means a big omapdrm rewrite. So, for
now, add locking to dispc for the problematic registers.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reported-by: Somnath Mukherjee <somnath@ti.com>
2015-02-26 12:15:13 +02:00
Tomi Valkeinen
4e1d3ca083 OMAPDSS: DISPC: fix div by zero issue in overlay scaling
omapdrm doesn't always configure the overlays correctly, causing the
overlay setup functions to be called with zero timings. This leads to
division by zero error.

This happens, for example, when a HDMI cable is not connected, but a
user tries to setup a plane with scaling.

Fixing omapdrm is a big job, so for now let's check for the bad timings
in DISPC and return an error.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-26 12:15:13 +02:00
Tomi Valkeinen
386f167c69 OMAPDSS: DISPC: change sync_pclk_edge default value
The common 'struct videomode' does not have a flag to select when the
sync signals should be driven.

The default behavior of DISPC HW is to drive the sync signal on the
opposite pixel clock edge from data signal, which is also what the
videomode_to_omap_video_timings() uses.

However, it looks like what panels usually expect is that the data and
sync signals are driven on the same edge, so let's change
videomode_to_omap_video_timings() to set the sync_pclk_edge accordingly.

Note that this only affect panels drivers that use
videomode_to_omap_video_timings(), probably when getting the video
timings directly from DT data. The drivers can still configure the
sync_pclk_edge independently if they so wish.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-26 12:15:12 +02:00
Tomi Valkeinen
7ad582be12 OMAPDSS: change signal_level & signal_edge enum values
At the moment the enum values for ACTIVE_HIGH and RISING_EDGE are 0, and
ACTIVE_LOW and FALLING_EDGE are 1, to match the values programmed to HW.
The previous patch removed this dependency.

Swap the enum values the other way around. This doesn't change the
behavior in any way, but makes it easier to debug as value of '1' means
HIGH or RISING.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-26 12:15:12 +02:00
Tomi Valkeinen
ed35188158 OMAPDSS: DISPC: explicit handling for sync and de levels
When configuring the lcd timings, instead of writing enum values
directly to the HW, use switch-case to get the value to be programmed.

This is safer and also allows us to change the enum values.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-26 12:15:12 +02:00
Tomi Valkeinen
7a16360d56 OMAPDSS: DISPC: remove OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES
DISPC can drive data lines either on rising or falling pixel clock edge,
which can be configured by the user.

Sync lines can also be driven on rising or falling pixel clock edge, but
additionally the HW can be configured to drive the sync lines on
opposite clock edge from the data lines.

This opposite edge setting does not make any sense, as the same effect
can be achieved by just setting the sync lines to be driven on the other
edge compared to the data lines. It feels like some kind of backward
compatibility option, even if all DSS versions seem to have the same
implementation.

To simplify the code and configuration of the signals, and to make the
dispc timings more compatible with what is used on other platforms,
let's just remove the whole opposite-edge support.

The drivers that used OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES setting are
changed so that they use the opposite setting from the data edge.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-26 12:15:11 +02:00
Tomi Valkeinen
6246c8b57c OMAPDSS: TFP410: fix input sync signals
TFP410 requires that DE is active high and the data and syncs are driven
on rising pixel clock edge. However, at the moment the driver doesn't
request such syncs, and the end result is that the sync settings depend
on default values, which are not right in all cases.

Set the sync values explicitly.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-26 12:15:11 +02:00
Tomi Valkeinen
e566658f2e OMAPDSS: fix paddr check for TILER addresses
The DISPC driver checks that the buffer address is not 0. However, when
using TILER, the address space is TILER specific and 0 is a valid
address.

Fix the check to allow address of 0 for TILER.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reported-by: srinivas pulukuru <srinivas.pulukuru@ti.com>
2015-02-26 12:15:11 +02:00
Richard Fitzgerald
575ef7f6d5 ASoC: arizona: Add support for WM8280/WM8281
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-26 10:04:45 +00:00
Richard Fitzgerald
2f2b6aa8c5 extcon: arizona: Add support for WM8280/WM8281
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-26 10:04:44 +00:00
Richard Fitzgerald
449c175ec6 gpio: arizona: Add support for WM8280/WM8281
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-26 10:04:43 +00:00
Richard Fitzgerald
f7293114b4 regulator: arizona-micsupp: Add support for WM8280/WM8281
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-26 10:04:43 +00:00
Richard Fitzgerald
c4ac37193e Documentation: devicetree: arizona: Add bindings for WM8280
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-26 10:04:42 +00:00
Richard Fitzgerald
e5d4ef0d73 mfd: arizona: Add support for WM8280/WM8281
This adds support for the Wolfson Microelectronics WM8280 and WM8281
codecs.

Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
[Lee: Minor fixup to remove potentially uninitialised variable. ]
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-26 10:04:07 +00:00
Christian Borntraeger
fb3d1c085c s390: let the compiler do page clearing
The hardware folks told me that for page clearing "when you exactly
know what to do, hand written xc+pfd is usally faster then mvcl for
page clearing, as it saves millicode overhead and parameter parsing
and checking" as long as you dont need the cache bypassing.
Turns out that gcc already does a proper xc,pfd loop.

A small test on z196 that does

buff = mmap(NULL, bufsize,PROT_EXEC|PROT_WRITE|PROT_READ,AP_PRIVATE| MAP_ANONYMOUS,0,0);
for ( i = 0; i < bufsize; i+= 256)
    buff[i] = 0x5;

gets 20% faster (touches every cache line of a page)

and

buff = mmap(NULL, bufsize,PROT_EXEC|PROT_WRITE|PROT_READ,AP_PRIVATE| MAP_ANONYMOUS,0,0);
for ( i = 0; i < bufsize; i+= 4096)
    buff[i] = 0x5;

is within noise ratio (touches one cache line of a page).

As the clear_page is usually called for first memory accesses
we can assume that at least one cache line is used afterwards,
so this change should be always better.
Another benchmark, a make -j 40 of my testsuite in tmpfs with
hot caches on a 32cpu system:

 -- unpatched --       --  patched  --
real     0m1.017s     real     0m0.994s   (~2% faster, but in noise)
user     0m5.339s     user     0m5.016s   (~6% faster)
sys      0m0.691s     sys      0m0.632s   (~8% faster)

Let use the same define to memset as the asm-generic variant

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-02-26 09:24:49 +01:00
Sebastian Ott
f0483044c1 s390/pci: fix possible information leak in mmio syscall
Make sure that even in error situations we do not use copy_to_user
on uninitialized kernel memory.

Cc: stable@vger.kernel.org # 3.19+
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-02-26 09:24:48 +01:00
Ameen Ali
3a9f9183bd s390/dcss: array index 'i' is used before limits check.
Avoid out-of-bounds-read by checking count before indexing.

Signed-off-by : Ameen Ali <Ameenali023@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-02-26 09:24:48 +01:00
Sebastian Ott
a13ccb04af s390/scm_block: fix off by one during cluster reservation
We increase the msb_count after we're finished building the request.
That way we can always access the current request via
scmrq->request[msb_count] . But once the request is started we need
to make sure that the array index stays below msb_count.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-02-26 09:24:47 +01:00
Heiko Carstens
72dace969d s390/jump label: improve and fix sanity check
Fix the output of the jump label sanity check and also print the
code pattern that is supposed to be written to the jump label.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-02-26 09:24:46 +01:00
Heiko Carstens
6f367769e3 s390/jump label: add missing jump_label_apply_nops() call
When modules are loaded we want to transform the compile time generated
nops into runtime generated nops. Otherwise the jump label sanity check
will detect invalid code when trying to patch code.

Fixes this crash:

Jump label code mismatch at __rds_conn_create+0x3c/0x720
Found:    c0 04 00 00 00 01
Expected: c0 04 00 00 00 00
Kernel panic - not syncing: Corrupted kernel text
CPU: 0 PID: 10 Comm: migration/0 Not tainted 3.19.0-01935-g006610f #14
Call Trace:
<0000000000113260> show_trace+0xf8/0x158)
<000000000011332a> show_stack+0x6a/0xe8
<000000000069fd64> dump_stack+0x7c/0xd8
<0000000000698d54> panic+0xe4/0x288
<00000000006984c6> jump_label_bug.isra.2+0xbe/0xc001
<000000000011200c> __jump_label_transform+0x94/0xc8

Reported-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-02-26 09:24:45 +01:00
Tomi Valkeinen
a38bb793ea OMAPDSS: fix regression with display sysfs files
omapdss's sysfs directories for displays used to have 'name' file,
giving the name for the display. This file was later renamed to
'display_name' to avoid conflicts with i2c sysfs 'name' file. Looks like
at least xserver-xorg-video-omap3 requires the 'name' file to be
present.

To fix the regression, this patch creates new kobjects for each display,
allowing us to create sysfs directories for the displays. This way we
have the whole directory for omapdss, and there will be no sysfs file
clashes with the underlying display device's sysfs files.

We can thus add the 'name' sysfs file back.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: NeilBrown <neilb@suse.de>
2015-02-26 10:23:15 +02:00
Sudip Mukherjee
d746b40c64 video: fbdev: fix possible null dereference
we were dereferencing edid first and the NULL check was after
accessing that. now we are using edid only if we know that
it is not NULL.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-26 10:23:15 +02:00
Kiran Padwal
11f09e53af video: ARM CLCD: Add missing error check for devm_kzalloc
This patch add a missing check on the return value of devm_kzalloc,
which would cause a NULL pointer dereference in a OOM situation.

Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-26 10:23:15 +02:00
Kishon Vijay Abraham I
0717103e65 ARM: DRA7: hwmod_data: Fix hwmod data for pcie
Fixed hwmod data for pcie by having the correct module mode offset.
Previously this module mode offset was part of pcie PHY which was wrong.
Now this module mode offset was moved to pcie hwmod and removed the hwmod data
for pcie phy. While at that renamed pcie_hwmod to pciess_hwmod in order
to match with the name given in TRM.

This helps to get rid of the following warning
"omap_hwmod: pcie1: _wait_target_disable failed"

[Grygorii.Strashko@linaro.org: Found the issue that actually caused
 "omap_hwmod: pcie1: _wait_target_disable failed"]
Signed-off-by: Grygorii Strashko <Grygorii.Strashko@linaro.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2015-02-26 00:02:28 -07:00
Peter Ujfalusi
6931795238 ARM: omap2+: omap_hwmod: Set unique lock_class_key per hwmod
Add struct lock_class_key to omap_hwmod struct and use it to set unique
lockdep class per hwmod.
This will ensure that lockdep will know that each omap_hwmod->_lock should
be treated as separate class and will not give false warning about deadlock
or other issues due to nested use of hwmods.
DRA7x's ATL hwmod is one example for this since McASP can select ATL clock
as functional clock, which will trigger nested oh->_lock usage. This will
trigger false warning from lockdep validator as it is dealing with classes
and for it all hwmod clocks are the same class.

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2015-02-26 00:00:51 -07:00
Stefan Agner
af321d2e32 ARM: vf610: use SMP_ON_UP for Vybrid SoC
The Vybrid SoC has only one Cortex-A5 core and hence should select
the SMP_ON_UP configuration on a SMP kernel.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-02-26 13:55:55 +08:00
Thomas Niederprüm
8af4baa708 ASoC: OMAP: mcbsp: Fix CLKX and CLKR pinmux when used as inputs
This patch fixes faulty behaviour in a setup where the input clock for the
SRG is fed through the CLKR/CLKX pin but the McBSP is configured to be
master (SND_SOC_DAIFMT_CBS_CFS). In that case of course CLKR/CLKX must
not be configured as output pin. Otherwise the input clock is messed up
horribly.

This patch makes it possible to use the CLKR/CLKX pin rather than CLKS to
inject a reference clock in setups where McBSP is master and not both
rx and tx are used. However for this to work it has to be ensured that
set_dai_sysclk() is called after set_dai_fmt().

This was tested on a beagleboard-xm using McBSP1 to drive a i2s DAC through
the tx lines (CLKX,FSX,DX). Using this patch the CLKR pin is used to inject
an external reference clock.

Signed-off-by: Thomas Niederprüm <niederp@physik.uni-kl.de>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-26 11:48:49 +09:00
Torsten Fleischer
76e1d14b31 spi: atmel: Fix interrupt setup for PDC transfers
Additionally to the current DMA transfer the PDC allows to set up a next DMA
transfer. This is useful for larger SPI transfers.

The driver currently waits for ENDRX as end of the transfer. But ENDRX is set
when the current DMA transfer is done (RCR = 0), i.e. it doesn't include the
next DMA transfer.
Thus a subsequent SPI transfer could be started although there is currently a
transfer in progress. This can cause invalid accesses to the SPI slave devices
and to SPI transfer errors.

This issue has been observed on a hardware with a M25P128 SPI NOR flash.

So instead of ENDRX we should wait for RXBUFF. This flag is set if there is
no more DMA transfer in progress (RCR = RNCR = 0).

Signed-off-by: Torsten Fleischer <torfl6749@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2015-02-26 11:34:23 +09:00
Kenneth Westfield
92b2ad2c9e ASoC: max98357a: Use standard DAI names
Use the standard naming convention for the codec DAI.

Signed-off-by: Kenneth Westfield <kwestfie@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-26 11:23:46 +09:00
Andy Shevchenko
9d239d353c spi: dw: revisit FIFO size detection again
The commit d297933cc7 (spi: dw: Fix detecting FIFO depth) tries to fix the
logic of the FIFO detection based on the description on the comments. However,
there is a slight difference between numbers in TX Level and TX FIFO size.

So, by specification the FIFO size would be in a range 2-256 bytes. From TX
Level prospective it means we can set threshold in the range 0-(FIFO size - 1)
bytes. Hence there are currently two issues:
  a) FIFO size 2 bytes is actually skipped since TX Level is 1 bit and could be
     either 0 or 1 byte;
  b) FIFO size is incorrectly decreased by 1 which already done by meaning of
     TX Level register.

This patch fixes it eventually right.

Fixes: d297933cc7 (spi: dw: Fix detecting FIFO depth)
Reviewed-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2015-02-26 11:09:51 +09:00
Oder Chiou
70068776c4 ASoC: rt5677: Correct the routing paths of that after IF1/2 DACx Mux
The patch corrects the routing paths of that after IF1/2 DACx Mux

Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-26 11:06:51 +09:00
Vinod Koul
5bb400ce4a ASoC: Intel: wrap runtime_pm usage count under CONFIG_PM
The struct dev_pm_ops defines usage_count only when CONFIG_PM is defined. So
we should use this variable only in cases where this falg is true.
So we define a local variable and read the value under this flag. In non PM
cases, we set this to 1.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-26 10:59:37 +09:00
Stefan Sauer
71daf89476 Input: mma8450 - add parent device
Add the parent device so that udev can show the full hierarchy. This avoids
the device showing up under /devices/virtual/input instead of the i2c bus
it is actually attached to.

Signed-off-by: Stefan Sauer <ensonic@google.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-25 17:13:51 -08:00
Laurent Pinchart
fd25cdd15b ARM: shmobile: lager: Add DU HDMI output support
Add DT nodes for the ADV7511 HDMI encoder and its HDMI output connector.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-26 10:05:49 +09:00