Commit graph

534,192 commits

Author SHA1 Message Date
WANG Cong
7afb8886a0 rtnetlink: call ->dellink on failure when ->newlink exists
Ignacy reported that when eth0 is down and add a vlan device
on top of it like:

  ip link add link eth0 name eth0.1 up type vlan id 1

We will get a refcount leak:

  unregister_netdevice: waiting for eth0.1 to become free. Usage count = 2

The problem is when rtnl_configure_link() fails in rtnl_newlink(),
we simply call unregister_device(), but for stacked device like vlan,
we almost do nothing when we unregister the upper device, more work
is done when we unregister the lower device, so call its ->dellink().

Reported-by: Ignacy Gawedzki <ignacy.gawedzki@green-communications.fr>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-15 08:30:10 -08:00
Michael Grzeschik
d95e2fe0ff com20020-pci: add support for eae single card
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-15 08:21:34 -08:00
Jason Wang
0960b6417e vhost_net: fix wrong iter offset when setting number of buffers
In commit ba7438aed9 ("vhost: don't bother copying iovecs in
handle_rx(), kill memcpy_toiovecend()"), we advance iov iter fixup
sizeof(struct virtio_net_hdr) bytes and fill the number of buffers
after doing the socket recvmsg(). This work well but was broken after
commit 6e03f896b5 ("Merge
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net") which tries
to advance sizeof(struct virtio_net_hdr_mrg_rxbuf). It will fill the
number of buffers at the wrong place. This patch fixes this.

Fixes 6e03f896b5
("Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net")
Cc: David S. Miller <davem@davemloft.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-15 08:17:15 -08:00
Jarkko Sakkinen
4d5f2051cd tpm, tpm_tis: fix TPM 2.0 probing
If during transmission system error was returned, the logic was to
incorrectly deduce that chip is a TPM 1.x chip. This patch fixes this
issue. Also, this patch changes probing so that message tag is used as the
measure for TPM 2.x, which should be much more stable. A separate function
called tpm2_probe() is encapsulated because it can be used with any
chipset.

Fixes: aec04cbdf7 ("tpm: TPM 2.0 FIFO Interface")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2015-02-15 16:59:15 +01:00
Jarkko Sakkinen
74d6b3ceaa tpm: fix suspend/resume paths for TPM 2.0
Fixed suspend/resume paths for TPM 2.0 and consolidated all the
associated code to the tpm_pm_suspend() and tpm_pm_resume()
functions. Resume path should be handled by the firmware, i.e.
Startup(CLEAR) for hibernate and Startup(STATE) for suspend.

There might be some non-PC embedded devices in the future where
Startup() is not the handled by the FW but fixing the code for
those IMHO should be postponed until there is hardware available
to test the fixes although extra Startup in the driver code is
essentially a NOP.

Added Shutdown(CLEAR) to the remove paths of TIS and CRB drivers.
Changed tpm2_shutdown() to a void function because there isn't
much you can do except print an error message if this fails with
a system error.

Fixes: aec04cbdf7 ("tpm: TPM 2.0 FIFO Interface")
Fixes: 30fc8d138e ("tpm: TPM 2.0 CRB Interface")
[phuewe: both did send TPM_Shutdown on resume which 'disables' the TPM
and did not send TPM2_Shutdown on teardown which leads some TPM2.0 to
believe there was an attack (no TPM2_Shutdown = no orderly shutdown =
attack)]

Reported-by: Peter Hüwe <PeterHuewe@gmx.de>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Scot Doyle <lkml14@scotdoyle.com>
Reviewed-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2015-02-15 16:56:49 +01:00
Michal Kazior
139e170da9 ath10k: add TxBF support
If firmware advertises support for TxBF then the
driver has to instruct the firmware accordingly
during runtime. Without this patch connecting to
an AP with beamformer support would yield abysmal
Rx performance.

This has been tested with wmi-tlv and qca6174
while acting as a STA beamformee only.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-02-15 16:50:42 +02:00
Michal Kazior
7777d8c7ef ath10k: implement fw stats for wmi-tlv
This processes and pushes fw stats to the debug
module (if enabled).

Changing the generic ath10k_wmi_requests_stats()
call to use more stat bits has no effect on older
firmware binaries.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-02-15 16:50:41 +02:00
Michal Kazior
eed55411d3 ath10k: add more wmi fw stat defines
New qca6174 wmi-tlv firmware revisions support
more stat event bits.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-02-15 16:50:41 +02:00
Michal Kazior
de23d3efb0 ath10k: change request stats command prototype
The expected parameter is not a single value but a
mask of values.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-02-15 16:50:41 +02:00
Michal Kazior
7b6b153a7a ath10k: add vdev stats processing
New qca6174 wmi-tlv firmware supports vdev stats.
This patch adds support for it in the debug
frontend.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-02-15 16:50:40 +02:00
Michal Kazior
2c512059bb ath10k: defer AP self-peer removal wait
Some firmware revisions don't notify host about
self-bss-peer removal until after associated vdev
is deleted. This has been observed with qca6174
WLAN.RM.2.0-00073 firmware.

This patch fixes AP teardown slowdowns and
prevents delays and warnings:

 ath10k_pci 0000:00:05.0: failed to remove peer for AP vdev 0: -110
 ath10k_pci 0000:00:05.0: removing stale peer xx:xx:xx:xx:xx:xx from vdev_id 0
 ath10k_pci 0000:00:05.0: peer-unmap-event: unknown peer id 24
 ath10k_pci 0000:00:05.0: peer-unmap-event: unknown peer id 8

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-02-15 16:50:40 +02:00
Ben Greear
99fc6f3adc ath10k: fix CE_DESC_FLAGS_META_DATA_LSB definition
The value was off by one.  The error probably has no negative
affect on any upstream firmware, but should be fixed anyway
in case it comes into use in the future.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-02-15 16:50:39 +02:00
Ben Greear
3eafdfd65b ath10k: fix spelling in htt code comment
Fix spelling error.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-02-15 16:50:39 +02:00
Ben Greear
60028a819d ath10k: fix spelling mistakes and add details to mac logging
A bit of general cleanup to make debug messages more useful.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-02-15 16:50:39 +02:00
Ben Greear
2f9eec0b71 ath10k: scan should handle scan-start-failed event properly
In case firmware fails to start the scan, then complete
the start condition and clean up so that driver does not
block on timeout.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-02-15 16:50:38 +02:00
Dan Carpenter
dd58d38fb3 mtd: hisilicon: && vs & typo
The intent was to mask away some bits here, not to test true or false.

Fix: 54f531f6e3 ('mtd: hisilicon: add a new NAND controller driver for hisilicon hip04 Soc')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-02-15 01:05:05 -08:00
Marcel Holtmann
18835dfa3a Bluetooth: btusb: Use matching names for Broadcom firmware files
The Broadcom firmware files are named with firmware version information
encoded into lmp_subver field. So BCM20702B0_002.001.014.0527.0607.hex
would be represented by 0x410e. To allow for an easier decoding of the
actual firmware names, provide an internal table that does the mapping
and request the firmware file by name.

Bluetooth: hci0: BCM20702B0 (002.001.014) build 0607

Now the complicated encoding of lmp_subver will be decoded and turned
into the name and firmware version information from the firmware files.

The previous attempt of using udev->product failed badly since it never
contains any matching entry to the actual hardware or firmware files
distributed by Broadcom in their Windows drivers. It is even worse since
it can change depending on if the internal bootstrapping happened before
the USB bus enumeration or after. This caused many race conditions.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-02-15 10:16:39 +02:00
Marcel Holtmann
87e2a020ca Bluetooth: Make __next_ident function static.
The __next_ident function is a local function and so do not export it
and make it static.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-02-15 10:14:54 +02:00
Marcel Holtmann
bc333cc465 Bluetooth: Make a2mp_send function static
The a2mp_send function is a local function and so do not export it
and make it static.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-02-15 10:14:52 +02:00
Marcel Holtmann
469cd4c5a6 Bluetooth: Make amp_mgr_lookup_by_state function static
The amp_mgr_lookup_by_state function does not need to be exported. So
just move it to a different location and make it static.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-02-15 10:14:51 +02:00
Marcel Holtmann
59d4d0863e Bluetooth: Make amp_mgr_list and amp_mgr_list_lock static
There is no reason to have amp_mgr_list and amp_mgr_list_lock exported
from a2mp.c and thus make both of them static.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-02-15 10:14:49 +02:00
Marcel Holtmann
055540a176 Bluetooth: Move A2MP_FEAT_EXT declaration into A2MP source
The A2MP_FEAT_EXT declaration has a single user in a2mp.c and thus
just move it there.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-02-15 10:14:48 +02:00
Stephen Hemminger
ca9f1fd263 net: spelling fixes
Spelling errors caught by codespell.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-14 20:36:08 -08:00
Masanari Iida
4a26e453d9 net/core: Fix warning while make xmldocs caused by dev.c
This patch fix following warning wile make xmldocs.

  Warning(.//net/core/dev.c:5345): No description found
  for parameter 'bonding_info'
  Warning(.//net/core/dev.c:5345): Excess function parameter
  'netdev_bonding_info' description in 'netdev_bonding_info_change'

This warning starts to appear after following patch was added
into Linus's tree during merger period.

commit 61bd3857ff
net/core: Add event for a change in slave state

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-14 20:34:49 -08:00
Sylvain Rochet
2b0ba96cea net: phy: micrel: disable NAND-tree for KSZ8021, KSZ8031, KSZ8051, KSZ8081
NAND-tree is used to check wiring between MAC and PHY using NAND gates
on the PHY side, hence the name.

NAND-tree initial status is latched at reset by probing the IRQ pin.
However some devices are sharing the PHY IRQ pin with other peripherals
such as Atmel SAMA5D[34]x-EK boards when using the optional TM7000
display module, therefore they are switching the PHY in NAND-tree test
mode depending on the current IRQ line status at reset.

This patch ensure PHY is not in NAND-tree test mode for all Micrel PHYs
using IRQ line as a NAND-tree toggle mode at reset.

Signed-off-by: Sylvain Rochet <sylvain.rochet@finsecur.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-14 20:30:55 -08:00
Martin KaFai Lau
3b4711757d ipv6: fix ipv6_cow_metrics for non DST_HOST case
ipv6_cow_metrics() currently assumes only DST_HOST routes require
dynamic metrics allocation from inetpeer.  The assumption breaks
when ndisc discovered router with RTAX_MTU and RTAX_HOPLIMIT metric.
Refer to ndisc_router_discovery() in ndisc.c and note that dst_metric_set()
is called after the route is created.

This patch creates the metrics array (by calling dst_cow_metrics_generic) in
ipv6_cow_metrics().

Test:
radvd.conf:
interface qemubr0
{
	AdvLinkMTU 1300;
	AdvCurHopLimit 30;

	prefix fd00:face:face:face::/64
	{
		AdvOnLink on;
		AdvAutonomous on;
		AdvRouterAddr off;
	};
};

Before:
[root@qemu1 ~]# ip -6 r show | egrep -v unreachable
fd00:face:face:face::/64 dev eth0  proto kernel  metric 256  expires 27sec
fe80::/64 dev eth0  proto kernel  metric 256
default via fe80::74df:d0ff:fe23:8ef2 dev eth0  proto ra  metric 1024  expires 27sec

After:
[root@qemu1 ~]# ip -6 r show | egrep -v unreachable
fd00:face:face:face::/64 dev eth0  proto kernel  metric 256  expires 27sec mtu 1300
fe80::/64 dev eth0  proto kernel  metric 256  mtu 1300
default via fe80::74df:d0ff:fe23:8ef2 dev eth0  proto ra  metric 1024  expires 27sec mtu 1300 hoplimit 30

Fixes: 8e2ec63917 (ipv6: don't use inetpeer to store metrics for routes.)
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-14 20:26:16 -08:00
Pravin B Shelar
26ad0b8358 openvswitch: Fix key serialization.
Fix typo where mask is used rather than key.

Fixes: 74ed7ab9264("openvswitch: Add support for unique flow IDs.")
Reported-by: Joe Stringer <joestringer@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Joe Stringer <joestringer@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-14 20:20:40 -08:00
hayeswang
65bab84c79 r8152: restore hw settings
There is a capability which let the hw could change the settings
automatically when the power change to ON. However, the USB reset
would reset the settings to the hw default, so the driver has to
restore the relative settings. Otherwise, it would influence the
functions of the hw, and the compatibility for the USB hub and
USB host controller.

The relative settings are as following.
 - set the power down scale to 96.
 - enable the power saving function of USB 2.0.
 - disable the ALDPS of ECM mode.
 - set burst mode depending on the burst size.
 - enable the flow control of endpoint full.
 - set fifo empty boundary to 32448 bytes.
 - enable the function of exiting LPM when Rx OK occurs.
 - set the connect timer to 1.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-14 20:15:45 -08:00
Omar Sandoval
6f30b7e37a ext4: fix indirect punch hole corruption
Commit 4f579ae7de (ext4: fix punch hole on files with indirect
mapping) rewrote FALLOC_FL_PUNCH_HOLE for ext4 files with indirect
mapping. However, there are bugs in several corner cases. This fixes 5
distinct bugs:

1. When there is at least one entire level of indirection between the
start and end of the punch range and the end of the punch range is the
first block of its level, we can't return early; we have to free the
intervening levels.

2. When the end is at a higher level of indirection than the start and
ext4_find_shared returns a top branch for the end, we still need to free
the rest of the shared branch it returns; we can't decrement partial2.

3. When a punch happens within one level of indirection, we need to
converge on an indirect block that contains the start and end. However,
because the branches returned from ext4_find_shared do not necessarily
start at the same level (e.g., the partial2 chain will be shallower if
the last block occurs at the beginning of an indirect group), the walk
of the two chains can end up "missing" each other and freeing a bunch of
extra blocks in the process. This mismatch can be handled by first
making sure that the chains are at the same level, then walking them
together until they converge.

4. When the punch happens within one level of indirection and
ext4_find_shared returns a top branch for the start, we must free it,
but only if the end does not occur within that branch.

5. When the punch happens within one level of indirection and
ext4_find_shared returns a top branch for the end, then we shouldn't
free the block referenced by the end of the returned chain (this mirrors
the different levels case).

Signed-off-by: Omar Sandoval <osandov@osandov.com>
2015-02-14 20:08:51 -05:00
Alexander Ploumistos
2eeff0b431 Bluetooth: ath3k: Add support Atheros AR5B195 combo Mini PCIe card
Add 04f2:aff1 to ath3k.c supported devices list and btusb.c blacklist, so
that the device can load the ath3k firmware and re-enumerate itself as an
AR3011 device.

T:  Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=04f2 ProdID=aff1 Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Signed-off-by: Alexander Ploumistos <alexpl@fedoraproject.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org
2015-02-15 00:45:12 +01:00
Tedd Ho-Jeong An
bfbd45e9ac Bluetooth: Add device shutdown routine for Intel Bluetooth device
This patch adds the device shutdown routine for Intel Bluetooth device.

Some platforms have BT LED issue with Intel Bluetooth device that BT LED goes
off 5 seconds after BT is turned off

For Intel Bluetooth device, the BT LED is turned off when:
- there is no active connection or radio activity
- USB is suspend

So, when the BT is turned off, it takes 5 seconds because USB suspend timeone
is 5 seconds by default. And if the USB suspend is not enabled, BT LED won't be
turned off.

To fix this issue, recently Intel Bluetooth firmware patch had been submitted
to turn off the BT LED immediately by the vendor specific command(0xFC3F). And
this patch sends this command to the device before closing the device.

For backward compatibility of this command  with old firmware, this command was
supported before, but it behaves same as HCI_RESET internally. So, it won't be
the problem even if the system doesn't have the latest firmware patch.

Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-02-15 00:39:22 +01:00
Tedd Ho-Jeong An
a44fecbd52 Bluetooth: Add shutdown callback before closing the device
This callback allows a vendor to send the vendor specific commands
before cloing the hci interface.

Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-02-15 00:37:52 +01:00
Nicholas Mc Guire
3e544ef935 at86rf230: assign wait_for_completion_timeout to appropriately typed var
return type of wait_for_completion_timeout is unsigned long not int.
As rc is used here only for wait_for_completion_timeout the type is simply
changed to unsigned long.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-02-15 00:08:39 +01:00
Alexander Aring
ff0fcc2987 6lowpan: nhc: add other known rfc6282 compressions
This patch adds other known rfc6282 compression formats to the nhc
framework. These compression formats are known but not implemented yet.
For now this is useful to printout a warning which compression format
isn't supported.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Cc: Martin Townsend <mtownsend1973@gmail.com>
Reviewed-by: Stefan Schmidt <s.schmidt@samsung.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-02-14 23:08:44 +01:00
Alexander Aring
cc6ed26847 6lowpan: add udp compression via nhc layer
This patch move UDP header compression and uncompression into the
generic 6LoWPAN nhc header compression layer. Moreover this patch
activates the nhc layer compression in iphc compression and
uncompression functions.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Cc: Martin Townsend <mtownsend1973@gmail.com>
Reviewed-by: Stefan Schmidt <s.schmidt@samsung.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-02-14 23:08:44 +01:00
Alexander Aring
92aa7c65d2 6lowpan: add generic nhc layer interface
This patch adds a generic next header compression layer interface. There
exists various methods to do a header compression after 6LoWPAN header
to save payload. This introduce a generic nhc header which allow a
simple adding of a new header compression format instead of a static
implementation inside the 6LoWPAN header compression and uncompression
function.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Cc: Martin Townsend <mtownsend1973@gmail.com>
Reviewed-by: Stefan Schmidt <s.schmidt@samsung.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-02-14 23:08:44 +01:00
Johan Hedberg
129a76931a Bluetooth: btusb: Remove unneeded btusb_wait_on_bit_timeout()
There's now a proper wait_on_bit_timeout() API in linux/wait.h so we can
remove our own copy from btusb.c. Our copy had the task state and
timeout variables swapped so the patch also changes their order.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-02-14 22:25:09 +01:00
Adrien Schildknecht
d347efeb16 mutex: remove unused field "name" in debug mode
This field is unused and uninitialized since commit 9a11b49a80
("[PATCH] lockdep: better lock debugging")

Signed-off-by: Adrien Schildknecht <adrien+dev@schischi.me>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-14 11:32:59 -08:00
Linus Torvalds
c833e17e27 Tighten rules for ACCESS_ONCE
This series tightens the rules for ACCESS_ONCE to only work
 on scalar types. It also contains the necessary fixups as
 indicated by build bots of linux-next.
 Now everything is in place to prevent new non-scalar users
 of ACCESS_ONCE and we can continue to convert code to
 READ_ONCE/WRITE_ONCE.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJU2H5MAAoJEBF7vIC1phx8Jm4QALPqKOMDSUBCrqJFWJeujtv2
 ILxJKsnjrAlt3dxnlVI3q6e5wi896hSce75PcvZ/vs/K3GdgMxOjrakBJGTJ2Qjg
 5njW9aGJDDr/SYFX33MLWfqy222TLtpxgSz379UgXjEzB0ymMWbJJ3FnGjVqQJdp
 RXDutpncRySc/rGHh9UPREIRR5GvimONsWE2zxgXjUzB8vIr2fCGvHTXfIb6RKbQ
 yaFoihzn0m+eisc5Gy4tQ1qhhnaYyWEGrINjHTjMFTQOWTlH80BZAyQeLdbyj2K5
 qloBPS/VhBTr/5TxV5onM+nVhu0LiblVNrdMHVeb7jyST4LeFOCaWK98lB3axSB5
 v/2D1YKNb3g1U1x3In/oNGQvs36zGiO1uEdMF1l8ZFXgCvHmATSFSTWBtqUhb5Ew
 JA3YyqMTG6dpRTMSnmu3/frr4wDqnxlB/ktQC1pf3tDp87mr1ZYEy/dQld+tltjh
 9Z5GSdrw0nf91wNI3DJf+26ZDdz5B+EpDnPnOKG8anI1lc/mQneI21/K/xUteFXw
 UZ1XGPLV2vbv9/a13u44SdjenHvQs1egsGeebMxVPoj6WmDLVmcIqinyS6NawYzn
 IlDGy/b3bSnXWMBP0ZVBX94KWLxqDDc4a/ayxsmxsP1tPZ+jDXjVDa7E3zskcHxG
 Uj5ULCPyU087t8Sl76mv
 =Dj70
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/borntraeger/linux

Pull ACCESS_ONCE() rule tightening from Christian Borntraeger:
 "Tighten rules for ACCESS_ONCE

  This series tightens the rules for ACCESS_ONCE to only work on scalar
  types.  It also contains the necessary fixups as indicated by build
  bots of linux-next.  Now everything is in place to prevent new
  non-scalar users of ACCESS_ONCE and we can continue to convert code to
  READ_ONCE/WRITE_ONCE"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/borntraeger/linux:
  kernel: Fix sparse warning for ACCESS_ONCE
  next: sh: Fix compile error
  kernel: tighten rules for ACCESS ONCE
  mm/gup: Replace ACCESS_ONCE with READ_ONCE
  x86/spinlock: Leftover conversion ACCESS_ONCE->READ_ONCE
  x86/xen/p2m: Replace ACCESS_ONCE with READ_ONCE
  ppc/hugetlbfs: Replace ACCESS_ONCE with READ_ONCE
  ppc/kvm: Replace ACCESS_ONCE with READ_ONCE
2015-02-14 10:54:28 -08:00
Jesper Nilsson
9987c19ed9 CRIS: Whitespace cleanup
No functional change, just clean up the most obvious.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-02-14 18:54:12 +01:00
Michael S. Tsirkin
83f1588e9f CRIS: macro whitespace fixes in uaccess.h
While working on arch/cris/include/asm/uaccess.h, I noticed
that some macros within this header are made harder to read because they
violate a coding style rule: space is missing after comma.

Fix it up.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-02-14 18:54:04 +01:00
Michael S. Tsirkin
458e319245 CRIS: uaccess: fix sparse errors
virtio wants to read bitwise types from userspace using get_user.  At the
moment this triggers sparse errors, since the value is passed through an
integer.

Fix that up using __force.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-02-14 18:53:52 +01:00
Masanari Iida
10b3097672 CRISv32: Remove unnecessary KERN_INFO from sync_serial
Remove unnecessary KERN_INFO in sync_serial.c

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-02-14 18:53:11 +01:00
Linus Torvalds
fee5429e02 Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
 "Here is the crypto update for 3.20:

   - Added 192/256-bit key support to aesni GCM.
   - Added MIPS OCTEON MD5 support.
   - Fixed hwrng starvation and race conditions.
   - Added note that memzero_explicit is not a subsitute for memset.
   - Added user-space interface for crypto_rng.
   - Misc fixes"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (71 commits)
  crypto: tcrypt - do not allocate iv on stack for aead speed tests
  crypto: testmgr - limit IV copy length in aead tests
  crypto: tcrypt - fix buflen reminder calculation
  crypto: testmgr - mark rfc4106(gcm(aes)) as fips_allowed
  crypto: caam - fix resource clean-up on error path for caam_jr_init
  crypto: caam - pair irq map and dispose in the same function
  crypto: ccp - terminate ccp_support array with empty element
  crypto: caam - remove unused local variable
  crypto: caam - remove dead code
  crypto: caam - don't emit ICV check failures to dmesg
  hwrng: virtio - drop extra empty line
  crypto: replace scatterwalk_sg_next with sg_next
  crypto: atmel - Free memory in error path
  crypto: doc - remove colons in comments
  crypto: seqiv - Ensure that IV size is at least 8 bytes
  crypto: cts - Weed out non-CBC algorithms
  MAINTAINERS: add linux-crypto to hw random
  crypto: cts - Remove bogus use of seqiv
  crypto: qat - don't need qat_auth_state struct
  crypto: algif_rng - fix sparse non static symbol warning
  ...
2015-02-14 09:47:01 -08:00
Vaishali Thakkar
9f59f970ec iio: gp2ap020a00f: Use put_unaligned_le32
This patch introduces the use of function put_unaligned_le32.

This is done using Coccinelle and semantic patch used is as follows:

@@ identifier tmp; expression ptr; expression y,e; type T; @@

- tmp = cpu_to_le32(y);

  <+... when != tmp
- memcpy(ptr, (T)&tmp, ...);
+ put_unaligned_le32(y,ptr);
  ...+>
? tmp = e

@@ type T; identifier tmp; @@

- T tmp;
...when != tmp

Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-02-14 17:28:41 +00:00
Linus Torvalds
83e047c104 Merge branch 'akpm' (patches from Andrew)
Merge fourth set of updates from Andrew Morton:

 - the rest of lib/

 - checkpatch updates

 - a few misc things

 - kasan: kernel address sanitizer

 - the rtc tree

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (108 commits)
  ARM: mvebu: enable Armada 38x RTC driver in mvebu_v7_defconfig
  ARM: mvebu: add Device Tree description of RTC on Armada 38x
  MAINTAINERS: add the RTC driver for the Armada38x
  drivers/rtc/rtc-armada38x: add a new RTC driver for recent mvebu SoCs
  rtc: armada38x: add the device tree binding documentation
  rtc: rtc-ab-b5ze-s3: add sub-minute alarm support
  rtc: add support for Abracon AB-RTCMC-32.768kHz-B5ZE-S3 I2C RTC chip
  of: add vendor prefix for Abracon Corporation
  drivers/rtc/rtc-rk808.c: fix rtc time reading issue
  drivers/rtc/rtc-isl12057.c: constify struct regmap_config
  drivers/rtc/rtc-at91sam9.c: constify struct regmap_config
  drivers/rtc/rtc-imxdi.c: add more known register bits
  drivers/rtc/rtc-imxdi.c: trivial clean up code
  ARM: mvebu: ISL12057 rtc chip can now wake up RN102, RN102 and RN2120
  rtc: rtc-isl12057: add isil,irq2-can-wakeup-machine property for in-tree users
  drivers/rtc/rtc-isl12057.c: add alarm support to Intersil ISL12057 RTC driver
  drivers/rtc/rtc-pcf2123.c: add support for devicetree
  kprobes: makes kprobes/enabled works correctly for optimized kprobes.
  kprobes: set kprobes_all_disarmed earlier to enable re-optimization.
  init: remove CONFIG_INIT_FALLBACK
  ...
2015-02-14 09:22:35 -08:00
Daniel Baluta
293487c8ec iio: Export userspace IIO headers
After UAPI header file split [1] all user-kernel interfaces were
placed under include/uapi/.

This patch moves IIO user specific API from:
	* include/linux/iio/events.h => include/uapi/linux/iio/events.h
	* include/linux/types.h => include/uapi/linux/types.h

Now there is no need for nasty tricks to compile userspace programs
(e.g iio_event_monitor). Just installing the kernel headers with
make headers_install command does the job.

[1] http://lwn.net/Articles/507794/

Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-02-14 17:05:03 +00:00
Filipe Manana
a742994aa2 Btrfs: don't remove extents and xattrs when logging new names
If we are recording in the tree log that an inode has new names (new hard
links were added), we would drop items, belonging to the inode, that we
shouldn't:

1) When the flag BTRFS_INODE_COPY_EVERYTHING is set in the inode's runtime
   flags, we ended up dropping all the extent and xattr items that were
   previously logged. This was done only in memory, since logging a new
   name doesn't imply syncing the log;

2) When the flag BTRFS_INODE_COPY_EVERYTHING is set in the inode's runtime
   flags, we ended up dropping all the xattr items that were previously
   logged. Like the case before, this was done only in memory because
   logging a new name doesn't imply syncing the log.

This led to some surprises in scenarios such as the following:

1) write some extents to an inode;
2) fsync the inode;
3) truncate the inode or delete/modify some of its xattrs
4) add a new hard link for that inode
5) fsync some other file, to force the log tree to be durably persisted
6) power failure happens

The next time the fs is mounted, the fsync log replay code is executed,
and the resulting file doesn't have the content it had when the last fsync
against it was performed, instead if has a content matching what it had
when the last transaction commit happened.

So change the behaviour such that when a new name is logged, only the inode
item and reference items are processed.

This is easy to reproduce with the test I just made for xfstests, whose
main body is:

  _scratch_mkfs >> $seqres.full 2>&1
  _init_flakey
  _mount_flakey

  # Create our test file with some data.
  $XFS_IO_PROG -f -c "pwrite -S 0xaa -b 8K 0 8K" \
      $SCRATCH_MNT/foo | _filter_xfs_io

  # Make sure the file is durably persisted.
  sync

  # Append some data to our file, to increase its size.
  $XFS_IO_PROG -f -c "pwrite -S 0xcc -b 4K 8K 4K" \
      $SCRATCH_MNT/foo | _filter_xfs_io

  # Fsync the file, so from this point on if a crash/power failure happens, our
  # new data is guaranteed to be there next time the fs is mounted.
  $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo

  # Now shrink our file to 5000 bytes.
  $XFS_IO_PROG -c "truncate 5000" $SCRATCH_MNT/foo

  # Now do an expanding truncate to a size larger than what we had when we last
  # fsync'ed our file. This is just to verify that after power failure and
  # replaying the fsync log, our file matches what it was when we last fsync'ed
  # it - 12Kb size, first 8Kb of data had a value of 0xaa and the last 4Kb of
  # data had a value of 0xcc.
  $XFS_IO_PROG -c "truncate 32K" $SCRATCH_MNT/foo

  # Add one hard link to our file. This made btrfs drop all of our file's
  # metadata from the fsync log, including the metadata relative to the
  # extent we just wrote and fsync'ed. This change was made only to the fsync
  # log in memory, so adding the hard link alone doesn't change the persisted
  # fsync log. This happened because the previous truncates set the runtime
  # flag BTRFS_INODE_NEEDS_FULL_SYNC in the btrfs inode structure.
  ln $SCRATCH_MNT/foo $SCRATCH_MNT/foo_link

  # Now make sure the in memory fsync log is durably persisted.
  # Creating and fsync'ing another file will do it.
  # After this our persisted fsync log will no longer have metadata for our file
  # foo that points to the extent we wrote and fsync'ed before.
  touch $SCRATCH_MNT/bar
  $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/bar

  # As expected, before the crash/power failure, we should be able to see a file
  # with a size of 32Kb, with its first 5000 bytes having the value 0xaa and all
  # the remaining bytes with value 0x00.
  echo "File content before:"
  od -t x1 $SCRATCH_MNT/foo

  # Simulate a crash/power loss.
  _load_flakey_table $FLAKEY_DROP_WRITES
  _unmount_flakey

  _load_flakey_table $FLAKEY_ALLOW_WRITES
  _mount_flakey

  # After mounting the fs again, the fsync log was replayed.
  # The expected result is to see a file with a size of 12Kb, with its first 8Kb
  # of data having the value 0xaa and its last 4Kb of data having a value of 0xcc.
  # The btrfs bug used to leave the file as it used te be as of the last
  # transaction commit - that is, with a size of 8Kb with all bytes having a
  # value of 0xaa.
  echo "File content after:"
  od -t x1 $SCRATCH_MNT/foo

The test case for xfstests follows soon.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-02-14 08:22:49 -08:00
Filipe Manana
1a4bcf470c Btrfs: fix fsync data loss after adding hard link to inode
We have a scenario where after the fsync log replay we can lose file data
that had been previously fsync'ed if we added an hard link for our inode
and after that we sync'ed the fsync log (for example by fsync'ing some
other file or directory).

This is because when adding an hard link we updated the inode item in the
log tree with an i_size value of 0. At that point the new inode item was
in memory only and a subsequent fsync log replay would not make us lose
the file data. However if after adding the hard link we sync the log tree
to disk, by fsync'ing some other file or directory for example, we ended
up losing the file data after log replay, because the inode item in the
persisted log tree had an an i_size of zero.

This is easy to reproduce, and the following excerpt from my test for
xfstests shows this:

  _scratch_mkfs >> $seqres.full 2>&1
  _init_flakey
  _mount_flakey

  # Create one file with data and fsync it.
  # This made the btrfs fsync log persist the data and the inode metadata with
  # a correct inode->i_size (4096 bytes).
  $XFS_IO_PROG -f -c "pwrite -S 0xaa -b 4K 0 4K" -c "fsync" \
       $SCRATCH_MNT/foo | _filter_xfs_io

  # Now add one hard link to our file. This made the btrfs code update the fsync
  # log, in memory only, with an inode metadata having a size of 0.
  ln $SCRATCH_MNT/foo $SCRATCH_MNT/foo_link

  # Now force persistence of the fsync log to disk, for example, by fsyncing some
  # other file.
  touch $SCRATCH_MNT/bar
  $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/bar

  # Before a power loss or crash, we could read the 4Kb of data from our file as
  # expected.
  echo "File content before:"
  od -t x1 $SCRATCH_MNT/foo

  # Simulate a crash/power loss.
  _load_flakey_table $FLAKEY_DROP_WRITES
  _unmount_flakey

  _load_flakey_table $FLAKEY_ALLOW_WRITES
  _mount_flakey

  # After the fsync log replay, because the fsync log had a value of 0 for our
  # inode's i_size, we couldn't read anymore the 4Kb of data that we previously
  # wrote and fsync'ed. The size of the file became 0 after the fsync log replay.
  echo "File content after:"
  od -t x1 $SCRATCH_MNT/foo

Another alternative test, that doesn't need to fsync an inode in the same
transaction it was created, is:

  _scratch_mkfs >> $seqres.full 2>&1
  _init_flakey
  _mount_flakey

  # Create our test file with some data.
  $XFS_IO_PROG -f -c "pwrite -S 0xaa -b 8K 0 8K" \
       $SCRATCH_MNT/foo | _filter_xfs_io

  # Make sure the file is durably persisted.
  sync

  # Append some data to our file, to increase its size.
  $XFS_IO_PROG -f -c "pwrite -S 0xcc -b 4K 8K 4K" \
       $SCRATCH_MNT/foo | _filter_xfs_io

  # Fsync the file, so from this point on if a crash/power failure happens, our
  # new data is guaranteed to be there next time the fs is mounted.
  $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo

  # Add one hard link to our file. This made btrfs write into the in memory fsync
  # log a special inode with generation 0 and an i_size of 0 too. Note that this
  # didn't update the inode in the fsync log on disk.
  ln $SCRATCH_MNT/foo $SCRATCH_MNT/foo_link

  # Now make sure the in memory fsync log is durably persisted.
  # Creating and fsync'ing another file will do it.
  touch $SCRATCH_MNT/bar
  $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/bar

  # As expected, before the crash/power failure, we should be able to read the
  # 12Kb of file data.
  echo "File content before:"
  od -t x1 $SCRATCH_MNT/foo

  # Simulate a crash/power loss.
  _load_flakey_table $FLAKEY_DROP_WRITES
  _unmount_flakey

  _load_flakey_table $FLAKEY_ALLOW_WRITES
  _mount_flakey

  # After mounting the fs again, the fsync log was replayed.
  # The btrfs fsync log replay code didn't update the i_size of the persisted
  # inode because the inode item in the log had a special generation with a
  # value of 0 (and it couldn't know the correct i_size, since that inode item
  # had a 0 i_size too). This made the last 4Kb of file data inaccessible and
  # effectively lost.
  echo "File content after:"
  od -t x1 $SCRATCH_MNT/foo

This isn't a new issue/regression. This problem has been around since the
log tree code was added in 2008:

  Btrfs: Add a write ahead tree log to optimize synchronous operations
  (commit e02119d5a7)

Test cases for xfstests follow soon.

CC: <stable@vger.kernel.org>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-02-14 08:22:49 -08:00
Forrest Liu
3d84be7991 Btrfs: fix BUG_ON in btrfs_orphan_add() when delete unused block group
Removing large amount of block group in a transaction may encounters
BUG_ON() in btrfs_orphan_add(). That is because btrfs_orphan_reserve_metadata()
will grab metadata reservation from transaction handle, and
btrfs_delete_unused_bgs() didn't reserve metadata for trnasaction handle when
delete unused block group.

The problem can be reproduce by following script

    mntpath=/btrfs
    loopdev=/dev/loop0
    filepath=/home/forrest/image

    umount $mntpath
    losetup -d $loopdev
    truncate --size 1000g $filepath
    losetup $loopdev $filepath
    mkfs.btrfs -f $loopdev
    mount $loopdev $mntpath

    for j in `seq 1 1 1000`; do
        fallocate -l 1g $mntpath/$j
    done
    # wait cleaner thread remove unused block group
    sleep 300

The call trace that results from the BUG_ON() is:

[  613.093084] ------------[ cut here ]------------
[  613.097928] kernel BUG at fs/btrfs/inode.c:3142!
[  613.105855] invalid opcode: 0000 [#1] SMP
[  613.112702] Modules linked in: coretemp(E) crc32_pclmul(E) ghash_clmulni_intel(E) aesni_intel(E) snd_ens1371(E) snd_ac97_codec(E) aes_x86_64(E) lrw(E) gf128mul(E) glue_helper(E) ppdev(E) ac97_bus(E) ablk_helper(E) gameport(E) cryptd(E) snd_rawmidi(E) snd_seq_device(E) snd_pcm(E) vmw_balloon(E) snd_timer(E) snd(E) soundcore(E) serio_raw(E) vmwgfx(E) ttm(E) drm_kms_helper(E) drm(E) vmw_vmci(E) parport_pc(E) shpchp(E) i2c_piix4(E) mac_hid(E) lp(E) parport(E) btrfs(E) xor(E) raid6_pq(E) hid_generic(E) usbhid(E) hid(E) psmouse(E) ahci(E) libahci(E) e1000(E) mptspi(E) mptscsih(E) mptbase(E) floppy(E) vmw_pvscsi(E) vmxnet3(E)
[  613.144196] CPU: 0 PID: 1480 Comm: btrfs-cleaner Tainted: G            E  3.19.0-rc7-custom #2
[  613.148501] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/31/2013
[  613.152694] task: ffff880035cdb1a0 ti: ffff880039cf4000 task.ti: ffff880039cf4000
[  613.154969] RIP: 0010:[<ffffffffa01441c2>]  [<ffffffffa01441c2>] btrfs_orphan_add+0x1d2/0x1e0 [btrfs]
[  613.157780] RSP: 0018:ffff880039cf7c48  EFLAGS: 00010286
[  613.159560] RAX: 00000000ffffffe4 RBX: ffff88003bd981a0 RCX: ffff88003c9e4000
[  613.161904] RDX: 0000000000002244 RSI: 0000000000040000 RDI: ffff88003c9e4138
[  613.164264] RBP: ffff880039cf7c88 R08: 000060ffc0000850 R09: 0000000000000000
[  613.166507] R10: ffff88003bc4b7a0 R11: ffffea0000eb6740 R12: ffff88003c9c0000
[  613.168681] R13: ffff88003c102160 R14: ffff88003c9c0458 R15: 0000000000000001
[  613.170932] FS:  0000000000000000(0000) GS:ffff88003f600000(0000) knlGS:0000000000000000
[  613.173316] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  613.175227] CR2: 00007f6343537000 CR3: 0000000036329000 CR4: 00000000000407f0
[  613.177554] Stack:
[  613.178712]  ffff880039cf7c88 ffffffffa0182a54 ffff88003c9e4b04 ffff88003c9c7800
[  613.181297]  ffff88003bc4b7a0 ffff88003bd981a0 ffff88003c8db200 ffff88003c2fcc60
[  613.183782]  ffff880039cf7d18 ffffffffa012da97 ffff88003bc4b7a4 ffff88003bc4b7a0
[  613.186171] Call Trace:
[  613.187493]  [<ffffffffa0182a54>] ? lookup_free_space_inode+0x44/0x100 [btrfs]
[  613.189801]  [<ffffffffa012da97>] btrfs_remove_block_group+0x137/0x740 [btrfs]
[  613.192126]  [<ffffffffa0166912>] btrfs_remove_chunk+0x672/0x780 [btrfs]
[  613.194267]  [<ffffffffa012e2ff>] btrfs_delete_unused_bgs+0x25f/0x280 [btrfs]
[  613.196567]  [<ffffffffa0135e4c>] cleaner_kthread+0x12c/0x190 [btrfs]
[  613.198687]  [<ffffffffa0135d20>] ? check_leaf+0x350/0x350 [btrfs]
[  613.200758]  [<ffffffff8108f232>] kthread+0xd2/0xf0
[  613.202616]  [<ffffffff8108f160>] ? kthread_create_on_node+0x180/0x180
[  613.204738]  [<ffffffff8175dabc>] ret_from_fork+0x7c/0xb0
[  613.206652]  [<ffffffff8108f160>] ? kthread_create_on_node+0x180/0x180
[  613.208741] Code: ff ff 0f 1f 80 00 00 00 00 89 45 c8 3e 80 63 80 fd 48 89 df e8 d0 23 fe ff 8b 45 c8 e9 14 ff ff ff b8 f4 ff ff ff e9 12 ff ff ff <0f> 0b 66 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 55 48
[  613.216562] RIP  [<ffffffffa01441c2>] btrfs_orphan_add+0x1d2/0x1e0 [btrfs]
[  613.218828]  RSP <ffff880039cf7c48>
[  613.220382] ---[ end trace 71073106deb8a457 ]---

This patch replace btrfs_join_transaction() with btrfs_start_transaction() in
btrfs_delete_unused_bgs() to revent BUG_ON() in btrfs_orphan_add()

Signed-off-by: Forrest Liu <forrestl@synology.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-02-14 08:22:49 -08:00