This is needed to support mirrored writes - the first write can't just
trash the lseg, we need to keep it around until all mirrors have
written.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Instead of calling layoutreturn directly, call pnfs_error_mark_layout_for_return
to mark layouts for return and let generic code return layout when
layout segments are freed.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
Conflicts:
fs/nfs/filelayout/filelayout.c
So that pnfs path is not disabled for ever.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
If current lseg is the last lseg marked with NFS_LSEG_LAYOUTRETURN,
send layoutreturn.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
And if we are to return the same type of layouts, don't bother
sending more layoutgets.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
It marks all matching layout segments as NFS_LSEG_LAYOUTRETURN,
which is an indicator for pnfs_put_lseg() to send layoutreturn,
and also prevents pnfs_update_layout() from using the returning
segments. Once it is set, it never gets cleared.
It also sets proper io failure bit so that pnfs path can be retried
after PNFS_LAYOUTGET_RETRY_TIMEOUT second.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
It allows to specify different iomode to return.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
So that it is possible to return a specific iomode layouts.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
Flexfiles layout would want to use them to report DS IO status.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
Per RFC 5661 Errata 3208:
| A client MAY always forget its layout state and associated
| layout stateid at any time (See also section 12.5.5.1).
| In such case, the client MUST use a non-layout stateid for the next
| LAYOUTGET operation. This will signal the server that the client has
| no more layouts on the file and its respective layout state can be
| released before issuing a new layout in response to LAYOUTGET.
In order to make such a signal unique to server, client needs to serialize
all layoutgets using non-layout stateid. We implement this by serializing
layoutgets when client has no layout segments at hand.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
Add a call to tally stats for a task under a different statsidx than
what's contained in the task structure.
This is needed to properly account for pnfs reads/writes when the
DS nfs version != the MDS version.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
Enable pNFS callbacks to allow flex files to work correctly with a
NFSv3-enabled data server.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
so that flexfile layout client can pass in DS credential instead of
using user cred, which will be done in the next patch.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
flexclient needs this as there is no nfs_server to DS connection.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
pnfs flexfile layout client may want to use NFSv3 ops rather
than the default MDS v4 ops.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
flexfile layout may need to set such when making DS connections.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
The flexfiles layout wants to create DS connection over NFSv3.
Add nfs3_set_ds_client to allow that to happen.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
They can be reused by flexfile layout as well.
Also add a code such that if read fails on one DS and
there are other DSes available to use, don't resend
through MDS but through pNFS so that client can read
from other DSes.
Reviewed-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
flexfile layout may use different auth flavor as specified by MDS.
Reviewed-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
It can be reused by flexfiles layout client.
Reviewed-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
It can be reused by flexfile layout.
Reviewed-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
Also pull nfs4_pnfs_ds_addr and nfs4_pnfs_ds to generic pnfs.
They can all be reused by flexfile layout as well.
Reviewed-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
The flexfilelayout driver will share some common code
with the filelayout driver. This set of changes refactors
that common code out to avoid any module depenencies.
Signed-off-by: Tom Haynes <loghyr@primarydata.com>
The 'ARM: OMAP3: legacy clock data move under clk driver' patch series
causes build errors when CONFIG_OMAP3 is not set:
drivers/clk/ti/dpll.c: In function 'ti_clk_register_dpll':
drivers/clk/ti/dpll.c:199:31: error: 'omap3_dpll_ck_ops' undeclared (first use in this function)
const struct clk_ops *ops = &omap3_dpll_ck_ops;
^
drivers/clk/ti/dpll.c:199:31: note: each undeclared identifier is reported only once for each function it appears in
drivers/clk/ti/dpll.c:259:10: error: 'omap3_dpll_per_ck_ops' undeclared (first use in this function)
ops = &omap3_dpll_per_ck_ops;
^
drivers/built-in.o: In function `ti_clk_register_gate':
drivers/clk/ti/gate.c:179: undefined reference to `clkhwops_omap3430es2_dss_usbhost_wait'
drivers/clk/ti/gate.c:179: undefined reference to `clkhwops_am35xx_ipss_module_wait'
-in.o: In function `ti_clk_register_interface':
drivers/clk/ti/interface.c💯 undefined reference to `clkhwops_omap3430es2_iclk_hsotgusb_wait'
drivers/clk/ti/interface.c💯 undefined reference to `clkhwops_omap3430es2_iclk_dss_usbhost_wait'
drivers/clk/ti/interface.c💯 undefined reference to `clkhwops_omap3430es2_iclk_ssi_wait'
drivers/clk/ti/interface.c💯 undefined reference to `clkhwops_am35xx_ipss_wait'
drivers/built-in.o: In function `ti_clk_register_composite':
:(.text+0x3da768): undefined reference to `ti_clk_build_component_gate'
In order to fix that problem, this patch makes the omap3 legacy code
compiled only when both CONFIG_OMAP3 and CONFIG_ATAGS are set.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
As complained by smatch:
drivers/media/usb/dvb-usb-v2/rtl28xxu.c:1159 rtl2832u_tuner_attach() info: 'pdata' is not actually initialized (unreached code).
Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
drivers/media/dvb-frontends/rtl2832.c:157:5: warning: no previous prototype for ‘rtl2832_bulk_write’ [-Wmissing-prototypes]
int rtl2832_bulk_write(struct i2c_client *client, unsigned int reg,
^
drivers/media/dvb-frontends/rtl2832.c:169:5: warning: no previous prototype for ‘rtl2832_update_bits’ [-Wmissing-prototypes]
int rtl2832_update_bits(struct i2c_client *client, unsigned int reg,
^
drivers/media/dvb-frontends/rtl2832.c:181:5: warning: no previous prototype for ‘rtl2832_bulk_read’ [-Wmissing-prototypes]
int rtl2832_bulk_read(struct i2c_client *client, unsigned int reg, void *val,
Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
drivers/media/dvb-frontends/rtl2830.c:21:5: warning: no previous prototype for ‘rtl2830_bulk_write’ [-Wmissing-prototypes]
int rtl2830_bulk_write(struct i2c_client *client, unsigned int reg,
^
drivers/media/dvb-frontends/rtl2830.c:33:5: warning: no previous prototype for ‘rtl2830_update_bits’ [-Wmissing-prototypes]
int rtl2830_update_bits(struct i2c_client *client, unsigned int reg,
^
drivers/media/dvb-frontends/rtl2830.c:45:5: warning: no previous prototype for ‘rtl2830_bulk_read’ [-Wmissing-prototypes]
int rtl2830_bulk_read(struct i2c_client *client, unsigned int reg, void *val,
^
Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Use rtl28xxu_ prefix for all register access routine names.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
As all the callbacks are already same we could merge device
properties struct too and save space.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Merge all chip type specific prefixed (rtl2831u_ and rtl2832u_)
callback to top level callback prefixed as rtl28xxu_.
rtl2831u_foo() => rtl28xxu_foo()
rtl2832u_foo() => rtl28xxu_foo()
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Detect automatically whether chip is old RTL2831U or newer
RTL2832U/RTL2832P. Detection is based I2C command that is found only
from newer RTL2832U models.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Buffer needed for USB control message is small so move it to state
and get rid of alloc/free used for each control message.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Pass correct device pointer to dev_* logging in order to print
module name and bus id correctly.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
I prefer dev over priv and I want keep all my drivers in line with
that.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
There was 2 muxed I2C adapters, one for demod tuner bus and one for
internal use. Idea of internal I2C adapter was to force I2C repeater
close when demod access its registers. Driver has also delayed work
queue based method to close I2C repeater.
After regmap conversion internal I2C adapter based repeater close
left unused - only work queue method was in use. We could not use
internal mux adapter method with regmap as it makes recursive regmap
call, which causes deadlock as regmap has own locking. Due to that
remove whole method totally.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
We are consumer of DVB frontend provided by rtl28xxu module. Due to
that we must use refcount to ensure none could remove rtl28xxu when
we are alive (or when we are streaming, if more fine-grained
refcounting is wanted).
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This driver, rtl28xxu, offers frontend service for rtl2832_sdr
module, thus we are producer and rtl2832_sdr module is consumer.
Due to that, reference counting should be done in way rtl2832_sdr
takes refrence to rtl28xxu. Remove wrong refcount.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>