Commit graph

546,533 commits

Author SHA1 Message Date
Thierry Reding
4553f733c6 drm/tegra: gem: Take into account IOMMU aperture
The IOMMU may not always be able to address 2 GiB of memory. On Tegra20,
the GART supports 32 MiB starting at 0x58000000. Also the aperture on
Tegra30 and later is in fact the full 4 GiB, rather than just 2 GiB as
currently assumed.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-06-12 16:23:50 +02:00
Thierry Reding
3c1dae0a07 drm/tegra: dpaux: Fix transfers larger than 4 bytes
The DPAUX read/write FIFO registers aren't sequential in the register
space, causing transfers larger than 4 bytes to cause accesses to non-
existing FIFO registers.

Fixes: 6b6b604215 ("drm/tegra: Add eDP support")
Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-06-12 16:22:46 +02:00
Marc Zyngier
8a14849b4a arm64: KVM: Switch vgic save/restore to alternative_insn
So far, we configured the world-switch by having a small array
of pointers to the save and restore functions, depending on the
GIC used on the platform.

Loading these values each time is a bit silly (they never change),
and it makes sense to rely on the instruction patching instead.

This leads to a nice cleanup of the code.

Acked-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-06-12 15:12:08 +01:00
Marc Zyngier
94a9e04aa1 arm64: alternative: Introduce feature for GICv3 CPU interface
Add a new item to the feature set (ARM64_HAS_SYSREG_GIC_CPUIF)
to indicate that we have a system register GIC CPU interface

This will help KVM switching to alternative instruction patching.

Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-06-12 15:11:50 +01:00
Terry Junge
81bb773fae HID: plantronics: Update to map volume up/down controls
Update Kconfig with enhanced help text for hid-plantronics driver.

Update hid-plantronics.c to identify device type and correctly map
either the vendor unique or consumer control volume up/down usages
to KEY_VOLUMEUP and KEY_VOLUMEDOWN events. Unmapped usages are ignored
to prevent core mapping of unknown usages to random mouse events.

Tested on ChromeBox/ChromeBook with various Plantronics devices.

Signed-off-by: Terry Junge <terry.junge@plantronics.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-06-12 15:04:17 +02:00
Zidan Wang
a077e81ec6 ASoC: wm8960: the enum of "DAC Polarity" should be wm8960_enum[1]
the enum of "DAC Polarity" should be wm8960_enum[1].

Signed-off-by: Zidan Wang <zidan.wang@freescale.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2015-06-12 14:01:51 +01:00
Maxime Ripard
4983a501af dmaengine: Revert "drivers/dma: remove unused support for MEMSET operations"
This reverts commit 48a9db462d.

Some platforms actually need support for the memset operations. Bring it back.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-06-12 18:16:39 +05:30
Maxime Ripard
5abecfa5e9 dmaengine: hdmac: Implement interleaved transfers
The AT91 HDMAC controller supports interleaved transfers through what's
called the Picture-in-Picture mode, which allows to transfer a squared
portion of a framebuffer.

This means that this interleaved transfer only supports interleaved
transfers which have a transfer size and ICGs that are fixed across all the
chunks.

While this is a quite drastic restriction of the interleaved transfers
compared to what the dmaengine API allows, this is still useful, and our
driver will only reject transfers that do not conform to this.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-06-12 18:13:36 +05:30
Maxime Ripard
87d001ef53 dmaengine: Move icg helpers to global header
Now that we can have ICGs set for both the source and destination (using
the icg field of struct data_chunk) or for only the source or the
destination (using the dst_icg or src_icg respectively), and that these
fields can be ignored depending on other parameters (src_inc, src_sgl,
etc.), the logic to get the actual ICG value can be quite tricky.

The XDMAC driver was already implementing it, but since we will need it in
other drivers, we can move it to the main header file.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-06-12 18:13:13 +05:30
Florian Westphal
482cfc3185 netfilter: xtables: avoid percpu ruleset duplication
We store the rule blob per (possible) cpu.  Unfortunately this means we can
waste lot of memory on big smp machines. ipt_entry structure ('rule head')
is 112 byte, so e.g. with maxcpu=64 one single rule eats
close to 8k RAM.

Since previous patch made counters percpu it appears there is nothing
left in the rule blob that needs to be percpu.

On my test system (144 possible cpus, 400k dummy rules) this
change saves close to 9 Gigabyte of RAM.

Reported-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-06-12 14:27:10 +02:00
Florian Westphal
71ae0dff02 netfilter: xtables: use percpu rule counters
The binary arp/ip/ip6tables ruleset is stored per cpu.

The only reason left as to why we need percpu duplication are the rule
counters embedded into ipt_entry et al -- since each cpu has its own copy
of the rules, all counters can be lockless.

The downside is that the more cpus are supported, the more memory is
required.  Rules are not just duplicated per online cpu but for each
possible cpu, i.e. if maxcpu is 144, then rule is duplicated 144 times,
not for the e.g. 64 cores present.

To save some memory and also improve utilization of shared caches it
would be preferable to only store the rule blob once.

So we first need to separate counters and the rule blob.

Instead of using entry->counters, allocate this percpu and store the
percpu address in entry->counters.pcnt on CONFIG_SMP.

This change makes no sense as-is; it is merely an intermediate step to
remove the percpu duplication of the rule set in a followup patch.

Suggested-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Reported-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-06-12 14:27:09 +02:00
Stephen Boyd
36e4f839de regulator: Add input current limit support
Some regulators can limit their input current (typically annotated
as ilim). Add an op (set_input_current_limit) and a DT property +
constraint to support this.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-12 13:18:02 +01:00
Stephen Boyd
57f66b7886 regulator: Add soft start support
Some regulators support a "soft start" feature where the voltage
ramps up slowly when the regulator is enabled. Add an op
(set_soft_start) and a DT property + constraint to support this.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-12 13:16:57 +01:00
Florian Westphal
d7b5974215 netfilter: bridge: restore vlan tag when refragmenting
If bridge netfilter is used with both
bridge-nf-call-iptables and bridge-nf-filter-vlan-tagged enabled
then ip fragments in VLAN frames are sent without the vlan header.

This has never worked reliably.  Turns out this relied on pre-3.5
behaviour where skb frag_list was used to store ip fragments;
ip_fragment() then re-used these skbs.

But since commit 3cc4949269
("ipv4: use skb coalescing in defragmentation") this is no longer
the case.  ip_do_fragment now needs to allocate new skbs, but these
don't contain the vlan tag information anymore.

Fix it by storing vlan information of the ressembled skb in the
br netfilter percpu frag area, and restore them for each of the
fragments.

Fixes: 3cc4949269 ("ipv4: use skb coalescing in defragmentation")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-06-12 14:16:55 +02:00
Florian Westphal
33b1f31392 net: ip_fragment: remove BRIDGE_NETFILTER mtu special handling
since commit d6b915e29f
("ip_fragment: don't forward defragmented DF packet") the largest
fragment size is available in the IPCB.

Therefore we no longer need to care about 'encapsulation'
overhead of stripped PPPOE/VLAN headers since ip_do_fragment
doesn't use device mtu in such cases.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-06-12 14:16:46 +02:00
Maarten Lankhorst
c0165304e1 drm/i915: Only enable cursor if it can be enabled.
The cursor should only be enabled if it's visible. This fixes
igt/kms_cursor_crc, which may otherwise produce the following
warning:

------------[ cut here ]------------
WARNING: CPU: 0 PID: 3425 at drivers/gpu/drm/i915/intel_display.c:9995 intel_crtc_update_cursor+0x14c/0x4d0 [i915]()
Missing switch case (0) in i9xx_update_cursor
Modules linked in: i915
CPU: 0 PID: 3425 Comm: kms_cursor_crc Tainted: G        W       4.1.0-rc7-patser+ #4079
Hardware name: LENOVO 2349AV8/2349AV8, BIOS G1ETA5WW (2.65 ) 04/15/2014
 ffffffffc01aad10 ffff8800b083faa8 ffffffff817f7827 0000000080000001
 ffff8800b083faf8 ffff8800b083fae8 ffffffff81084955 ffff8800b083fad8
 ffff8800c4931148 0000000001200000 ffff8800c48b0000 0000000000000000
Call Trace:
 [<ffffffff817f7827>] dump_stack+0x4f/0x7b
 [<ffffffff81084955>] warn_slowpath_common+0x85/0xc0
 [<ffffffff810849d1>] warn_slowpath_fmt+0x41/0x50
 [<ffffffffc0139f2c>] intel_crtc_update_cursor+0x14c/0x4d0 [i915]
 [<ffffffffc01497f4>] __intel_set_mode+0x6c4/0x750 [i915]
 [<ffffffffc0150143>] intel_crtc_set_config+0x473/0x5c0 [i915]
 [<ffffffff81467da9>] drm_mode_set_config_internal+0x69/0x120
 [<ffffffff8146c1b9>] drm_mode_setcrtc+0x189/0x540
 [<ffffffff8145c7e0>] drm_ioctl+0x1a0/0x6a0
 [<ffffffff810b3b41>] ? get_parent_ip+0x11/0x50
 [<ffffffff811e9c28>] do_vfs_ioctl+0x2f8/0x530
 [<ffffffff810d0f7d>] ? trace_hardirqs_on+0xd/0x10
 [<ffffffff812e7746>] ? selinux_file_ioctl+0x56/0x100
 [<ffffffff811e9ee1>] SyS_ioctl+0x81/0xa0
 [<ffffffff81801617>] system_call_fastpath+0x12/0x6f
---[ end trace abf0f71163290a96 ]---

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-06-12 15:11:11 +03:00
Maarten Lankhorst
b8b7fadec3 drm/i915: Set hwmode during readout.
This was introduced after converting hw readout to atomic,
so it should have been part of the revert too.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90929
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-06-12 15:10:59 +03:00
Maarten Lankhorst
02e0efb5b4 drm/i915: get rid of intel_plane_restore in intel_crtc_page_flip
Use a full atomic call instead. intel_crtc_page_flip will still
have to live until async updates are allowed.

This doesn't seem to be a regression from the convert to atomic,
part 3 patch. During GPU reset it fixes the following warning:

 ------------[ cut here ]------------
WARNING: CPU: 0 PID: 752 at drivers/gpu/drm/drm_crtc.c:5337 drm_mode_page_flip_ioctl+0x27b/0x360()
Modules linked in: i915
CPU: 0 PID: 752 Comm: Xorg Not tainted 4.1.0-rc7-patser+ #4090
Hardware name: NUC5i7RYB, BIOS RYBDWi35.86A.0246.2015.0309.1355 03/09/2015
 ffffffff81c90866 ffff8800d87c3ca8 ffffffff817f7d87 0000000080000001
 0000000000000000 ffff8800d87c3ce8 ffffffff81084955 ffff880000000000
 ffff8800d87c3dc0 ffff8800d93d1208 0000000000000000 ffff8800b7d1f3e0
Call Trace:
 [<ffffffff817f7d87>] dump_stack+0x4f/0x7b
 [<ffffffff81084955>] warn_slowpath_common+0x85/0xc0
 [<ffffffff81084a35>] warn_slowpath_null+0x15/0x20
 [<ffffffff8146dffb>] drm_mode_page_flip_ioctl+0x27b/0x360
 [<ffffffff8145ccb0>] drm_ioctl+0x1a0/0x6a0
 [<ffffffff810b3b41>] ? get_parent_ip+0x11/0x50
 [<ffffffff812e5540>] ? avc_has_perm+0x20/0x280
 [<ffffffff810b3b41>] ? get_parent_ip+0x11/0x50
 [<ffffffff811ea0f8>] do_vfs_ioctl+0x2f8/0x530
 [<ffffffff811f6001>] ? expand_files+0x261/0x270
 [<ffffffff812e7c16>] ? selinux_file_ioctl+0x56/0x100
 [<ffffffff811ea3b1>] SyS_ioctl+0x81/0xa0
 [<ffffffff81801b97>] system_call_fastpath+0x12/0x6f
---[ end trace 9ce834560085bd64 ]---

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-06-12 15:10:39 +03:00
Maarten Lankhorst
b17d48e27d drm/i915: Do not use atomic modesets in hw readout.
This should fix fallout caused by making intel_crtc_control
and update_dpms atomic, which became a problem after reverting the
atomic hw readout patch.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90929
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-06-12 15:10:31 +03:00
Bernhard Thaler
efb6de9b4b netfilter: bridge: forward IPv6 fragmented packets
IPv6 fragmented packets are not forwarded on an ethernet bridge
with netfilter ip6_tables loaded. e.g. steps to reproduce

1) create a simple bridge like this

        modprobe br_netfilter
        brctl addbr br0
        brctl addif br0 eth0
        brctl addif br0 eth2
        ifconfig eth0 up
        ifconfig eth2 up
        ifconfig br0 up

2) place a host with an IPv6 address on each side of the bridge

        set IPv6 address on host A:
        ip -6 addr add fd01:2345:6789:1::1/64 dev eth0

        set IPv6 address on host B:
        ip -6 addr add fd01:2345:6789:1::2/64 dev eth0

3) run a simple ping command on host A with packets > MTU

        ping6 -s 4000 fd01:2345:6789:1::2

4) wait some time and run e.g. "ip6tables -t nat -nvL" on the bridge

IPv6 fragmented packets traverse the bridge cleanly until somebody runs.
"ip6tables -t nat -nvL". As soon as it is run (and netfilter modules are
loaded) IPv6 fragmented packets do not traverse the bridge any more (you
see no more responses in ping's output).

After applying this patch IPv6 fragmented packets traverse the bridge
cleanly in above scenario.

Signed-off-by: Bernhard Thaler <bernhard.thaler@wvnet.at>
[pablo@netfilter.org: small changes to br_nf_dev_queue_xmit]
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-06-12 14:10:12 +02:00
Bernhard Thaler
a4611d3b74 netfilter: bridge: re-order check_hbh_len()
Prepare check_hbh_len() to be called from newly introduced
br_validate_ipv6() in next commit.

Signed-off-by: Bernhard Thaler <bernhard.thaler@wvnet.at>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-06-12 14:09:46 +02:00
Stephen Boyd
23c779b9f9 regulator: Add pull down support
Some regulators need to be configured to pull down a resistor
when the regulator is disabled. Add an op (set_pull_down) and a
DT property + constraint to support this.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-12 13:09:43 +01:00
Bernhard Thaler
77d574e728 netfilter: bridge: rename br_parse_ip_options
br_parse_ip_options() does not parse any IP options, it validates IP
packets as a whole and the function name is misleading.

Rename br_parse_ip_options() to br_validate_ipv4() and remove unneeded
commments.

Signed-off-by: Bernhard Thaler <bernhard.thaler@wvnet.at>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-06-12 14:09:17 +02:00
Bernhard Thaler
411ffb4fde netfilter: bridge: refactor frag_max_size
Currently frag_max_size is member of br_input_skb_cb and copied back and
forth using IPCB(skb) and BR_INPUT_SKB_CB(skb) each time it is changed or
used.

Attach frag_max_size to nf_bridge_info and set value in pre_routing and
forward functions. Use its value in forward and xmit functions.

Signed-off-by: Bernhard Thaler <bernhard.thaler@wvnet.at>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-06-12 14:08:51 +02:00
Bernhard Thaler
72b31f7271 netfilter: bridge: detect NAT66 correctly and change MAC address
IPv4 iptables allows to REDIRECT/DNAT/SNAT any traffic over a bridge.

e.g. REDIRECT
$ sysctl -w net.bridge.bridge-nf-call-iptables=1
$ iptables -t nat -A PREROUTING -p tcp -m tcp --dport 8080 \
  -j REDIRECT --to-ports 81

This does not work with ip6tables on a bridge in NAT66 scenario
because the REDIRECT/DNAT/SNAT is not correctly detected.

The bridge pre-routing (finish) netfilter hook has to check for a possible
redirect and then fix the destination mac address. This allows to use the
ip6tables rules for local REDIRECT/DNAT/SNAT REDIRECT similar to the IPv4
iptables version.

e.g. REDIRECT
$ sysctl -w net.bridge.bridge-nf-call-ip6tables=1
$ ip6tables -t nat -A PREROUTING -p tcp -m tcp --dport 8080 \
  -j REDIRECT --to-ports 81

This patch makes it possible to use IPv6 NAT66 on a bridge. It was tested
on a bridge with two interfaces using SNAT/DNAT NAT66 rules.

Reported-by: Artie Hamilton <artiemhamilton@yahoo.com>
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
[bernhard.thaler@wvnet.at: rebased, add indirect call to ip6_route_input()]
[bernhard.thaler@wvnet.at: rebased, split into separate patches]
Signed-off-by: Bernhard Thaler <bernhard.thaler@wvnet.at>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-06-12 14:08:07 +02:00
Bernhard Thaler
8cae308d2b netfilter: bridge: re-order br_nf_pre_routing_finish_ipv6()
Put br_nf_pre_routing_finish_ipv6() after daddr_was_changed() and
br_nf_pre_routing_finish_bridge() to prepare calling these functions
from there.

Signed-off-by: Bernhard Thaler <bernhard.thaler@wvnet.at>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-06-12 14:07:56 +02:00
Bernhard Thaler
d39a33ed9b netfilter: bridge: refactor clearing BRNF_NF_BRIDGE_PREROUTING
use binary AND on complement of BRNF_NF_BRIDGE_PREROUTING to unset
bit in nf_bridge->mask.

Signed-off-by: Bernhard Thaler <bernhard.thaler@wvnet.at>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-06-12 14:07:53 +02:00
Marcelo Ricardo Leitner
779668450a netfilter: conntrack: warn the user if there is a better helper to use
After db29a9508a ("netfilter: conntrack: disable generic tracking for
known protocols"), if the specific helper is built but not loaded
(a standard for most distributions) systems with a restrictive firewall
but weak configuration regarding netfilter modules to load, will
silently stop working.

This patch then puts a warning message so the sysadmin knows where to
start looking into. It's a pr_warn_once regardless of protocol itself
but it should be enough to give a hint on where to look.

Cc: Florian Westphal <fw@strlen.de>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-06-12 14:06:24 +02:00
Stephen Boyd
22a10bca28 regulator: Add system_load constraint
Some regulators have a fixed load that isn't captured by
consumers that the kernel knows about. Add a constraint to
support this.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-12 13:05:11 +01:00
Arnaud Pouliquen
85a4bfd895 ASoC: simple card: Add mclk-fs property in dai-link
Add mclk-fs ratio property per dai-link sub node. This will
allow to manage several codecs with different ratio.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-12 12:35:54 +01:00
Fang, Yang A
fd35e37510 ASoC: Intel: Added I2C dependency to two BSW machine drivers
Fixed below error/warnings

   sound/built-in.o: In function `rt5645_i2c_probe':
>> rt5645.c:(.text+0xe38f5): undefined reference to
>> `devm_regmap_init_i2c'
   sound/built-in.o: In function `rt5645_i2c_driver_exit':
>> rt5645.c:(.exit.text+0x60e): undefined reference to `i2c_del_driver'
   sound/built-in.o: In function `rt5645_i2c_driver_init':
>> rt5645.c:(.init.text+0x1a90): undefined reference to
>> `i2c_register_driver'

Signed-off-by: Fang, Yang A <yang.a.fang@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-12 11:54:39 +01:00
Axel Lin
25c8888ad6 ASoC: rt5645: Use devm_gpiod_get_optional for hp-detect
Since hp-detect is optional, use devm_gpiod_get_optional instead.
In additional, it should return error if devm_gpiod_get_optional fails.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-12 11:52:29 +01:00
Qipeng Zha
361c1066c9 pwm: lpss: pci: Add support for Broxton platform
Add PCI device IDs for Broxton platform.

Signed-off-by: Qipeng Zha <qipeng.zha@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-06-12 12:46:50 +02:00
Sebastian Andrzej Siewior
4decab1aff ASoC: Intel: sst: use ; instead of , at the of a C statement
This was spotted by Fernando Lopez-Lezcano <nando@ccrma.Stanford.EDU>
while he tried to compile a -RT kernel with this driver enabled.
"make C=2" would also warn about this. This is is based on his patch.

Reported-by: Fernando Lopez-Lezcano <nando@ccrma.Stanford.EDU>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-12 11:36:56 +01:00
Alexandre Belloni
061981ff8c ASoC: atmel: properly select dma driver state
It is currently possible to have CONFIG_SND_ATMEL_SOC_SSC=y with either
CONFIG_SND_ATMEL_SOC_PDC=m or CONFIG_SND_ATMEL_SOC_DMA=m. This results in a
driver that compiles but does not link with this kind of error:

sound/built-in.o: In function `atmel_ssc_set_audio':
(.text+0x87d90): undefined reference to `atmel_pcm_pdc_platform_register'
sound/built-in.o: In function `atmel_ssc_put_audio':
(.text+0x8879a): undefined reference to `atmel_pcm_pdc_platform_unregister'

Introduce new config options SND_ATMEL_SOC_SSC_PDC and
SND_ATMEL_SOC_SSC_DMA which should be used by the board drivers and the
correct logic to properly select the SND_ATMEL_SOC_PDC and
SND_ATMEL_SOC_DMA states.

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-12 11:34:31 +01:00
Alexandre Belloni
9cf08a6561 ASoC: atmel: Revert previous fix for Kconfig limations
After discussing with the Kconfig maintainer, we found a better fiw
allowing to keep each driver as modules.

This reverts commit 0ef9dc139d.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-12 11:34:13 +01:00
David Woodhouse
c83b2f20fd iommu/vt-d: Only enable extended context tables if PASID is supported
Although the extended tables are theoretically a completely orthogonal
feature to PASID and anything else that *uses* the newly-available bits,
some of the early hardware has problems even when all we do is enable
them and use only the same bits that were in the old context tables.

For now, there's no motivation to support extended tables unless we're
going to use PASID support to do SVM. So just don't use them unless
PASID support is advertised too. Also add a command-line bailout just in
case later chips also have issues.

The equivalent problem for PASID support has already been fixed with the
upcoming VT-d spec update and commit bd00c606a ("iommu/vt-d: Change
PASID support to bit 40 of Extended Capability Register"), because the
problematic platforms use the old definition of the PASID-capable bit,
which is now marked as reserved and meaningless.

So with this change, we'll magically start using ECS again only when we
see the new hardware advertising "hey, we have PASID support and we
actually tested it this time" on bit 40.

The VT-d hardware architect has promised that we are not going to have
any reason to support ECS *without* PASID any time soon, and he'll make
sure he checks with us before changing that.

In the future, if hypothetical new features also use new bits in the
context tables and can be seen on implementations *without* PASID support,
we might need to add their feature bits to the ecs_enabled() macro.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2015-06-12 11:31:25 +01:00
Oder Chiou
48edaa4b4f ASoC: rt5645: Add the device tree parser
Modify the RT5645 driver to parse platform data from device tree. This is
missing from previous patch in sound/soc/codecs/rt5645.c, that was present
in v3.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-12 11:30:07 +01:00
Fang, Yang A
ffb3722b97 ASoC: Intel: Fixed incorrect sst pcm_delay
This patch corrected pcm_delay calculation in BSW sst driver

Signed-off-by: Fang, Yang A <yang.a.fang@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-12 11:23:50 +01:00
Maarten Lankhorst
f721790560 Revert "drm/i915: Read hw state into an atomic state struct, v2."
This reverts commit 3bae26eb2991c00670df377cf6c3bc2b0577e82a.

Seems it introduces regressions for 3 different reasons, oh boy..

In bug #90868 as I can see the atomic state will be restored on
resume without the planes being set up properly. Because plane
setup here requires the atomic state, we'll have to settle
for committing atomic planes first.

In bug #90861 the failure appears to affect mostly DP devices,
and happens because reading out the atomic state prevents a modeset
on boot, which would require better hw state readout.

In bug #90874 it's shown that cdclk should be part of the atomic
state, so only performing a single modeset during resume excarbated
the issue.

It's better to fix those issues first, and then commit this patch,
so do that temporarily.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90868
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90861
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90874
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-06-12 13:19:35 +03:00
Maarten Lankhorst
9716c691ce Revert "drm/i915: Make intel_display_suspend atomic, v2."
This reverts commit 490f400db5d886fc28566af69b02f6497f31be4b.

We're not ready yet to make it atomic, we calculate some state in
advance, but without atomic plane support atomic the hw readout will
fail.

It's required to revert this commit to revert the atomic hw
state readout patch.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90868
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90861
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-06-12 13:19:35 +03:00
Maarten Lankhorst
5c2db1882a drm/i915: use calculated state for vblank evasion
crtc->active will be gone eventually, and this check should be just as good.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-06-12 13:19:34 +03:00
Maarten Lankhorst
3538b9dffd drm/i915: Use atomic state for calculating DVO_2X_MODE on i830.
This is a small behavioral change because it leaves DVO_2X_MODE
set between crtc_disable and crtc_enable. This is probably harmless
though and if not should be fixed by calculating 2x mode before
enable/disable pll.

This is needed because intel_crtc->active will be removed eventually.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-06-12 13:19:34 +03:00
Maarten Lankhorst
99d736a2ce drm/i915: Calculate haswell plane workaround, v5.
This needs to be done last after all modesets have been calculated.

A modeset first disables all crtc's, so any crtc that undergoes a
modeset counts as inactive.

If no modeset's done, or > 1 crtc's stay w/a doesn't apply.
Apply workaround on the first crtc if 1 crtc stays active.
Apply workaround on the second crtc if no crtc was active.

Changes since v1:
 - Use intel_crtc->atomic as a place to put hsw_workaround_pipe.
 - Make sure quirk only applies to haswell.
 - Use first loop to iterate over newly enabled crtc's only.
   This increases readability.
Changes since v2:
 - Move hsw_workaround_pipe back to crtc_state.
Changes since v3:
 - Return errors from haswell_mode_set_planes_workaround.
Changes since v4:
- Clean up commit message.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-06-12 13:19:34 +03:00
Maarten Lankhorst
f77076c91d drm/i915: Remove use of crtc->config from i915_debugfs.c
crtc->config is updated to always contain to the active crtc_state
and only differs from crtc_state during crtc_disable. It will
eventually be removed, so start with some low hanging fruit.

For crtc->active the situation is the same; it will be removed
eventually. Instead use crtc->state->active.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-06-12 13:19:34 +03:00
Maarten Lankhorst
fc467a221a drm/i915: Use crtc->hwmode for vblanks, v2.
intel_crtc->config will be removed eventually, so use crtc->hwmode.
drm_atomic_helper_update_legacy_modeset_state updates hwmode,
but crtc->active will eventually be gone too. Set dotclock to zero
to indicate the crtc is inactive.

Changes since v1:
- With the hwmode update in drm*update_legacy_modeset_state removed,
  intel_modeset_update_state has to assign it instead.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-06-12 13:19:34 +03:00
Maarten Lankhorst
1c5e19f8f1 drm/i915: move swap state to the right place
This is a preparation for passing crtc state to the helpers.
When converting all users of crtc->config to use the old or
new state it's easier to find regressions when swap_state is
done first.

If crtc->config is swapped at the same place as swap_state
bugs will never be found.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-06-12 13:19:34 +03:00
Maarten Lankhorst
06ea0b0897 drm/i915: Make intel_display_suspend atomic, v2.
Calculate all state using a normal transition, but afterwards fudge
crtc->state->active back to its old value. This should still allow
state restore in setup_hw_state to work properly.

Calling intel_set_mode will cause intel_display_set_init_power to be
called, make sure init_power gets set again afterwards.

Changes since v1:
- Fix to compile with v2 of the patch that adds intel_display_suspend.
- Add intel_display_set_init_power.
- Set return value to int to allow error checking.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-06-12 13:19:34 +03:00
Maarten Lankhorst
5da76e94c4 drm/i915: Implement intel_crtc_control using atomic state, v4
Assume the callers lock everything with drm_modeset_lock_all.

This change had to be done after converting suspend/resume to
use atomic_state so the atomic state is preserved, otherwise
all transitional state is erased.

Now all callers of .crtc_enable and .crtc_disable go through
atomic modeset! :-D

Changes since v1:
- Only check for crtc_state->active in valleyview_modeset_global_pipes.
- Only check for crtc_state->active in modeset_update_crtc_power_domains.
Changes since v2:
- Rework on top of the changed patch order.
Changes since v3:
- Rename intel_crtc_toggle in description to *_control
- Change return value to int.
- Do not add plane state, should be done implicitly already.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-06-12 13:19:33 +03:00
Ander Conselvan de Oliveira
37ade41794 drm/i915: Read hw state into an atomic state struct, v2.
To make this work we load the new hardware state into the
atomic_state, then swap it with the sw state.

This lets us change the force restore path in setup_hw_state()
to use a single call to intel_mode_set() to restore all the
previous state.

As a nice bonus this kills off encoder->new_encoder,
connector->new_enabled and crtc->new_enabled. They were used only
to restore the state after a modeset.

Changes since v1:
- Make sure all possible planes are added with their crtc set,
  so they will be turned off on first modeset.

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-06-12 13:19:33 +03:00