Commit graph

546,533 commits

Author SHA1 Message Date
Herbert Xu
a5a2b4da01 crypto: aesni - Use crypto_aead_set_reqsize helper
This patch uses the crypto_aead_set_reqsize helper to avoid directly
touching the internals of aead.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-13 10:31:43 +08:00
Herbert Xu
ba6d8e3958 crypto: seqiv - Use crypto_aead_set_reqsize helper
This patch uses the crypto_aead_set_reqsize helper to avoid directly
touching the internals of aead.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-13 10:31:41 +08:00
Herbert Xu
fd0de97890 crypto: pcrypt - Use crypto_aead_set_reqsize helper
This patch uses the crypto_aead_set_reqsize helper to avoid directly
touching the internals of aead.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-13 10:31:41 +08:00
Herbert Xu
5d72336f1b crypto: gcm - Use crypto_aead_set_reqsize helper
This patch uses the crypto_aead_set_reqsize helper to avoid directly
touching the internals of aead.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-13 10:31:40 +08:00
Herbert Xu
529a0b625b crypto: cryptd - Use crypto_aead_set_reqsize helper
This patch uses the crypto_aead_set_reqsize helper to avoid directly
touching the internals of aead.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-13 10:31:40 +08:00
Herbert Xu
2c221ad394 crypto: ccm - Use crypto_aead_set_reqsize helper
This patch uses the crypto_aead_set_reqsize helper to avoid directly
touching the internals of aead.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-13 10:31:39 +08:00
Herbert Xu
6650d09b3a crypto: authencesn - Use crypto_aead_set_reqsize helper
This patch uses the crypto_aead_set_reqsize helper to avoid directly
touching the internals of aead.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-13 10:31:38 +08:00
Herbert Xu
25df919430 crypto: authenc - Use crypto_aead_set_reqsize helper
This patch uses the crypto_aead_set_reqsize helper to avoid directly
touching the internals of aead.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-13 10:31:37 +08:00
Herbert Xu
21b7013414 crypto: aead - Add crypto_aead_set_reqsize helper
This patch adds the helper crypto_aead_set_reqsize so that people
don't have to directly access the aead internals to set the reqsize.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-13 10:31:36 +08:00
Herbert Xu
add86d5576 crypto: caam - Remove unnecessary reference to crt_aead
crt_aead is an internal implementation detail and must not be
used outside of the crypto API itself.  This patch replaces the
unnecessary uses of crt_aead with crypto_aead_ivsize.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-13 10:31:35 +08:00
Herbert Xu
d1a2fd500c crypto: blkcipher - Include crypto/aead.h
All users of AEAD should include crypto/aead.h instead of
include/linux/crypto.h.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-13 10:31:34 +08:00
Herbert Xu
e98014abd8 crypto: talitos - Include internal/aead.h
All AEAD implementations must include internal/aead.h in order
to access required helpers.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-13 10:31:33 +08:00
Herbert Xu
0ed6264b60 crypto: qat - Include internal/aead.h
All AEAD implementations must include internal/aead.h in order
to access required helpers.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-13 10:31:32 +08:00
Herbert Xu
2d78db0935 crypto: nx - Include internal/aead.h
All AEAD implementations must include internal/aead.h in order
to access required helpers.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-13 10:31:31 +08:00
Herbert Xu
5290b42830 crypto: ixp4xx - Include internal/aead.h
All AEAD implementations must include internal/aead.h in order
to access required helpers.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-13 10:31:30 +08:00
Herbert Xu
b579d42672 crypto: caam - Include internal/aead.h
All AEAD implementations must include internal/aead.h in order
to access required helpers.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-13 10:31:28 +08:00
Herbert Xu
7fb2a4bdce crypto: authencesn - Include internal/aead.h
All AEAD implementations must include internal/aead.h in order
to access required helpers.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-13 10:31:26 +08:00
Herbert Xu
68acbf843c crypto: authenc - Include internal/aead.h
All AEAD implementations must include internal/aead.h in order
to access required helpers.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-13 10:31:26 +08:00
Herbert Xu
d6ef2f198d crypto: api - Add crypto_grab_spawn primitive
This patch adds a new primitive crypto_grab_spawn which is meant
to replace crypto_init_spawn and crypto_init_spawn2.  Under the
new scheme the user no longer has to worry about reference counting
the alg object before it is subsumed by the spawn.

It is pretty much an exact copy of crypto_grab_aead.

Prior to calling this function spawn->frontend and spawn->inst
must have been set.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-13 10:31:25 +08:00
Andy Lutomirski
e9886ace22 selftests, x86: Rework x86 target architecture detection
We currently fail to build on a non-multilib x86_64 target.  We
print a helpful error, but it's nicer to allow the build to succeed.
Fix it and improve cross-compilation support by detecting
architecture support directly and building only the relevant tests.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-05-12 20:02:40 -06:00
Andy Lutomirski
c1e6e5cb94 selftests, x86: Remove useless run_tests rule
Now that selftests/x86 uses the kselftest infrastructure, the
run_x86_tests.sh mechanism is just in the way.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-05-12 20:02:22 -06:00
Tyler Baker
07620abec8 selftests/x86: install tests
Include lib.mk and set TEST_PROGS where appropriate.

Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Tyler Baker <tyler.baker@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-05-12 20:00:37 -06:00
Tyler Baker
1872d01ab4 selftest/x86: have no dependency on all when cross building
If the CROSS_COMPILE is set remove all's dependency on all_32 and all_64.

Cc: Andy Lutomirski <luto@amacapital.net>
Acked-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Tyler Baker <tyler.baker@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-05-12 20:00:15 -06:00
Tyler Baker
f9ea4a333c selftest/x86: build both bitnesses
Using uname with the processor flag option in some cases can yield 'unknown'
so lets use the machine flag option as it is deterministic. Add a dependency
for all_32 when building on a x86 64 bit host so that both bitnesses are
built in this case.

Cc: Andy Lutomirski <luto@amacapital.net>
Acked-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Tyler Baker <tyler.baker@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-05-12 19:59:55 -06:00
Brian Norris
bd1b40fe58 Documentation: devicetree: add binding doc for Broadcom NAND controller
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
2015-05-12 17:22:07 -07:00
Linus Torvalds
6c9d370c16 Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS fixes from Ralf Baechle:
 "One build fix for build breakage of all MIPS SMP kernels caused by
  Rusty's fix of obsolete use of cpu mask helpers, another to fix the FP
  ABI selection when loading an ELF binary"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: fix FP mode selection in lieu of .MIPS.abiflags data
  MIPS: SMP: Fix build error.
2015-05-12 16:02:06 -07:00
Linus Torvalds
03906ca389 Changes for 4.1-rc3
Update MAINTAINERS git repo pointer
   printk garbage fix
   Fix for qib and iw_cxgb4 bugs introduced in 4.1 window
   Fix for an older iWARP netlink bug
   Fix a memcpy issue in ehca driver
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVUmDlAAoJELgmozMOVy/dfJ4P/3vZIUr7nrbKUF7CWB3kZMrz
 nkWGg/u+IpLccaYmWwC/15lFDpGxuhE6yEv0wlY9C1q4P4j6Sk2SiPixsGzII2Sq
 4zFlrItGFhzHttnTnUujJrFS7gJYZRfa6r3Z1IwevAeP15cTZhCIgxfBpJTQFAin
 bscwGNXo1qEq0QHnyDIU5/9JwhruRUIwJadymIzsBvVVjJhow3mIIT0rlsKXilmx
 6urg4fGVh955kKCIbQxGJPPKR2P+UZMPGWl9Ohua7PfdeO4lIqNXchjxxaJNp6FI
 MZUsdOw5GxgRLl3k3/1I1KZyAQeW1Kjlg41A0R2uSc8P3PjSeHWsxyMyU+hMPnj/
 kPT16+Ghftxn9yUdMESW+vkpNoRGz3glFrg0OlmCXkJTMjJ1MlT8n6NYOfrJY5Cp
 r5YlqZFl/VP7u3W6wEfFilG3uqig6VJJFwEd2AHB54iiBA0s0wgn+vA3XhP/YRF9
 CiEvtCn/MhJkIDPqbpm8fxYC6gNkUWM2EgYbHxXz+/LWn379FT7eSXFZd0BS0OTc
 7OxJu93Y/LQIzCDLb64OT73uqFXen84uH3CS/jf1ktgvr/7FDllx5A/v3vY5BZHI
 xgc4WW6S5RZMZaCPFo4GA6Sg+Z83q1r4Kj8mLEltucMQykvHvGSraAXRMvkmBlD7
 mshtwNS/Wsn7EQjnuwYI
 =NPTK
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma

Pull rdma fixes from Doug Ledford:
 - update MAINTAINERS git repo pointer
 - printk garbage fix
 - fix for qib and iw_cxgb4 bugs introduced in 4.1 window
 - fix for an older iWARP netlink bug
 - fix a memcpy issue in ehca driver

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
  infiniband: Remove duplicated KERN_<LEVEL> from pr_<level> uses
  IB/qib: fix test of unsigned variable
  RDMA/core: Fix for parsing netlink string attribute
  MAINTAINERS: update the official rdma git repo
  iw_cxgb4: use wildcard mapping for getting remote addr info
  IB/ehca: use correct destination for memcpy
2015-05-12 15:54:54 -07:00
Nicolas Dichtel
e3d8ecb70e netns: return RTM_NEWNSID instead of RTM_GETNSID on a get
Usually, RTM_NEWxxx is returned on a get (same as a dump).

Fixes: 0c7aecd4bd ("netns: add rtnl cmd to add and get peer netns ids")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12 18:53:25 -04:00
Linus Torvalds
cc49e8c9e6 power supply and reset fixes for the v4.1 series
* misc. fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCgAGBQJVUVbOAAoJENju1/PIO/qa4qEQAIFmixrKGdivaKd04r0/u0kV
 6urv5i29lZ9G4q7wDvmu3iAY5XyNuapUyR0HqUUL1nBP/UdDbRSlAxMMZrQf48WN
 XFR8xJsCkVJKlB8Fw69tE2v/sDt/h1Tkkp7fskiFhcrL2VUNFI2APoUGKMO3yfEu
 bw0PjVd4Yk1pKIFW8tuGHI+hKGH90mrJGn6VGFyOJJs0hvcqrJ/jGhN7h4h2C4Gj
 9ivTh1qxd+YYn4ue4EU+kas/tIHvEedSUJQLDR258A5PKxrb2hf/rljTF1HxqcLY
 8hDIXHcX36z6a+ie5wWaLwoY2g/GMhK7JmHLUOiEh8cVagIbpLE2HndEmycM6enn
 XNkMLkjmZLof1DCFCYnknGxUY49WBivGkb+nzBusYLk18CJ5xQMCMJcTMiIu7b/D
 NVahIuH0GFy33Jio0U6N2AiWjwY7bleeUHebqJOCzoeAyvCvxG0jHKbvQvI3JqUp
 tdKRbkmckqCKHAobBoChyWu1h4U2wwar+WIZIFgvnLlVuD/OXwlWTHo+++prbXLA
 Gi5EaEcmzSlWQ75/enpJokXxdTQTgbF+ecu+lxidUX2Z72hu9xRniFsja8T3Iu7w
 f+h5h7KJiJ1t6PluHMqEIZs0YlDv/sLSDwqUFbT2OOtIscYr7EIm4GnHkv3GkOZi
 Eb7EvKRC2BFSyltUlFzm
 =PiIg
 -----END PGP SIGNATURE-----

Merge tag 'for-v4.1-rc' of git://git.infradead.org/battery-2.6

Pull power supply and reset fixes from Sebastian Reichel:
 "misc fixes"

* tag 'for-v4.1-rc' of git://git.infradead.org/battery-2.6:
  power: bq27x00_battery: Add missing MODULE_ALIAS
  power: reset: Add MFD_SYSCON depends for brcmstb
  power: reset: ltc2952: Remove bogus hrtimer_start() return value checks
  power_supply: fix oops in collie_battery driver
  power/reset: at91: fix return value check in at91_reset_platform_probe()
  MAINTAINERS: Add me as maintainer of Nokia N900 power supply drivers
  axp288_fuel_gauge: Add original author details
2015-05-12 15:49:29 -07:00
Rafael J. Wysocki
ff284f37fc Revert "ACPICA: Permanently set _REV to the value '2'."
Revert commit b1ef297258 (ACPICA: Permanently set _REV to the value
'2'.) as it causes a sound regression to happen on Dell XPS 13 (2015).

Reported-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-05-13 00:44:14 +02:00
David S. Miller
a62b70ddd1 Merge branch 'switchdev_spring_cleanup'
Scott Feldman says:

====================
switchdev: spring cleanup

v7:

Address review comments:

 - [Jiri] split the br_setlink and br_dellink reverts into their own patches
 - [Jiri] some parameter cleanup of rocker's memory allocators
 - [Jiri] pass trans mode as formal parameter rather than hanging off of
     rocker_port.

v6:

Address review comments:

 - [Jiri] split a couple of patches into one-logical-change per patch
 - [Joe Perches] revert checkpatch -f changes for wrapped lines with long
     symbols.

v5:

Address review comments:

 - [Jiri] include Jiri's s/swdev/switchdev rename patches up front.
 - [Jiri] squash some patches.  Now setlink/dellink/getlink patches are in
     three parts: new implementation, convert drivers to new, delete old impl.
 - [Jiri] some minor variable renames
 - [Jiri] use BUG_ON rather than WARN when COMMIT phase fails when PREPARE
     phase said it was safe to come into the water.
 - [Simon] rocker: fix a few transaction prepare-commit cases that were wrong.
     This was the bulk of the changes in v5.

v4:

Well, it was a lot of work, but now prepare-commit transaction model is how
davem advises: if prepare fails, abort the transaction.  The driver must do
resource reservations up front in prepare phase and return those resources if
aborting.  Commit phase would use reserved resources.  The good news is the
driver code (for rocker) now handles resource allocation failures better by not
leaving partially device or driver states.  This is a side-effect of the
prepare phase where state isn't modified; only validation of inputs and
resource reservations happen in the prepare phase.  Since we're supporting
setting attrs and add objs across lower devs in the stacked case, we need to
hold rtnl_lock (or ensure rtnl_lock is held) so lower devs don't move on us
during the prepare-commit transaction.  DSA driver code skips the prepare phase
and goes straight for the commit phase since no up-front allocations are done
and no device failures (that could be detected in the prepare phase) can
happen.

Remove NETIF_F_HW_SWITCH_OFFLOAD from rocker and the swdev_attr_set/get
wrappers.  DSA doesn't set NETIF_F_HW_SWITCH_OFFLOAD, so it can't be in
swdev_attr_set/get.  rocker doesn't need it; or rather can't support
NETIF_F_HW_SWITCH_OFFLOAD being set/cleared at run-time after the device
port is already up and offloading L2/L3.  NETIF_F_HW_SWITCH_OFFLOAD is still
left as a feature flag for drivers that can use it.

Drop the renaming patch for netdev_switch_notifier.  Other renames are a
result of moving to the attr get/set or obj add/del model.  Everything
but the netdev_switch_notifier is still prefixed with "swdev_".

v3:

Move to two-phase prepare-commit transaction model for attr set and obj add.
Driver gets a change in prepare phase to NACK transaction if lack of resources
or support in device.

v2:

Address review comments:

 - [Jiri] squash a few related patches
 - [Roopa] don't remove NETIF_F_HW_SWITCH_OFFLOAD
 - [Roopa] address VLAN setlink/dellink
 - [Ronen] print warning is attr set revert fails

Not address:

 - Using something other than "swdev_" prefix
 - Vendor extentions

The patch set grew a bit to not only support port attr get/set but also add
support for port obj add/del.  Example of port objs are VLAN, FDB entries, and
FIB entries.  The VLAN support now allows the swdev driver to get VLAN ranges
and flags like PVID and "untagged".  Sridhar will be adding FDB obj support
in follow-on patch.

v1:

The main theme of this patch set is to cleanup swdev in preparation for
new features or fixes to be added soon.  We have a pretty good idea now how
to handle stacked drivers in swdev, but there where some loose ends.  For
example, if a set failed in the middle of walking the lower devs, we would
leave the system in an undefined state...there was no way to recover back to
the previous state.  Speaking of sets, also recognize a pattern that most
swdev API accesses are gets or sets of port attributes, so go ahead and make
port attr get/set the central swdev API, and convert everything that is
set-ish/get-ish to this new API.

Features/fixes that should follow from this cleanup:

 - solve the duplicate pkt forwarding issue
 - get/set bridge attrs, like ageing_time, from/to device
 - get/set more bridge port attrs from/to device

There are some rename cleanups tagging along at the end, to give swdev
consistent naming.

And finally, some much needed updates to the switchdev.txt documentation to
hopefully capture the state-of-the-art of swdev.  Hopefully, we can do a better
job keeping this document up-to-date.

Tested with rocker, of course, to make sure nothing functional broke.  There
are a couple minor tweaks to DSA code for getting switch ID and setting STP
updates to use new API, but not expecting amy breakage there.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12 18:43:56 -04:00
Scott Feldman
4ceec22d6d switchdev: bring documentation up-to-date
Much need updated of switchdev documentation to cover what's been
implmented to-date.  There are some XXX comments in the text for
unimplemented or broken items.  I'd like to keep these in there (poor-man's
TODO list) and update the document once each issue is resolved.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12 18:43:56 -04:00
Scott Feldman
4725ceb9b7 rocker: make checkpatch -f clean
Well almost clean: ignore the CHECKs for space after cast operator and some
longer-than-80 char cases where for readability it's better to keep as-is.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12 18:43:56 -04:00
Scott Feldman
7889cbee83 switchdev: remove NETIF_F_HW_SWITCH_OFFLOAD feature flag
Roopa said remove the feature flag for this series and she'll work on
bringing it back if needed at a later date.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12 18:43:55 -04:00
Scott Feldman
58c2cb16b1 switchdev: convert fib_ipv4_add/del over to switchdev_port_obj_add/del
The IPv4 FIB ops convert nicely to the switchdev objs and we're left with
only four switchdev ops: port get/set and port add/del.  Other objs will
follow, such as FDB.  So go ahead and convert IPv4 FIB over to switchdev
obj for consistency, anticipating more objs to come.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12 18:43:55 -04:00
Scott Feldman
85fdb95672 switchdev: cut over to new switchdev_port_bridge_getlink
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12 18:43:55 -04:00
Scott Feldman
8793d0a664 switchdev: add new switchdev_port_bridge_getlink
Like bridge_setlink, add switchdev wrapper to handle bridge_getlink and
call into port driver to get port attrs.  For now, only BR_LEARNING and
BR_LEARNING_SYNC are returned.  To add more, we'll probably want to break
away from ndo_dflt_bridge_getlink() and build the netlink skb directly in
the switchdev code.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12 18:43:55 -04:00
Scott Feldman
8508025c59 bridge: revert br_dellink change back to original
This is revert of:

commit 68e331c785 ("bridge: offload bridge port attributes to switch asic
if feature flag set")

Restore br_dellink back to original and don't call into SELF port driver.
rtnetlink.c:bridge_dellink() already does a call into port driver for SELF.

bridge vlan add/del cmd defaults to MASTER.  From man page for bridge vlan
add/del cmd:

       self   the vlan is configured on the specified physical device.
              Required if the device is the bridge device.

       master the vlan is configured on the software bridge (default).

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12 18:43:55 -04:00
Scott Feldman
87a5dae59e switchdev: remove unused switchdev_port_bridge_dellink
Now we can remove old wrappers for dellink.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12 18:43:55 -04:00
Scott Feldman
54ba5a0bbc switchdev: cut over to new switchdev_port_bridge_dellink
Rocker, bonding and team and switch over to the new
switchdev_port_bridge_dellink to avoid duplicating code in each driver.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12 18:43:55 -04:00
Scott Feldman
5c34e02214 switchdev: add new switchdev_port_bridge_dellink
Same change as setlink.  Provide the wrapper op for SELF ndo_bridge_dellink
and call into the switchdev driver to delete afspec VLANs.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12 18:43:55 -04:00
Scott Feldman
41c498b935 bridge: restore br_setlink back to original
This is revert of:

commit 68e331c785 ("bridge: offload bridge port attributes to switch asic
if feature flag set")

Restore br_setlink back to original and don't call into SELF port driver.
rtnetlink.c:bridge_setlink() already does a call into port driver for SELF.

bridge set link cmd defaults to MASTER.  From man page for bridge link set
cmd:

       self   link setting is configured on specified physical device

       master link setting is configured on the software bridge (default)

The link setting has two values: the device-side value and the software
bridge-side value.  These are independent and settable using the bridge
link set cmd by specifying some combination of [master] | [self].
Furthermore, the device-side and bridge-side settings have their own
initial value, viewable from bridge -d link show cmd.

Restoring br_setlink back to original makes rocker (the only in-kernel user
of SELF link settings) work as first implement: two-sided values.

It's true that when both MASTER and SELF are specified from the command,
two netlink notifications are generated, one for each side of the settings.
The user-space app can distiquish between the two notifications by
observing the MASTER or SELF flag.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12 18:43:54 -04:00
Scott Feldman
e71f220b34 switchdev: remove old switchdev_port_bridge_setlink
New attr-based bridge_setlink can recurse lower devs and recover on err, so
remove old wrapper (including ndo_dflt_switchdev_port_bridge_setlink).

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12 18:43:54 -04:00
Scott Feldman
fc8f40d864 switchdev: cut over to new switchdev_port_bridge_setlink
Rocker, bonding, and team can now use the switchdev bridge setlink to parse
raw netlink; no need to duplicate this code in each driver.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12 18:43:54 -04:00
Scott Feldman
47f8328bb1 switchdev: add new switchdev bridge setlink
Add new switchdev_port_bridge_setlink that can be used by drivers
implementing .ndo_bridge_setlink to set switchdev bridge attributes.
Basically turn the raw rtnl_bridge_setlink netlink into switchdev attr
sets.  Proper netlink attr policy checking is done on the protinfo part of
the netlink msg.

Currently, for protinfo, only bridge port attrs BR_LEARNING and
BR_LEARNING_SYNC are parsed and passed to port driver.

For afspec, VLAN objs are passed so switchdev driver can set VLANs assigned
to SELF.  To illustrate with iproute2 cmd, we have:

	bridge vlan add vid 10 dev sw1p1 self master

To add VLAN 10 to port sw1p1 for both the bridge (master) and the device
(self).

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12 18:43:54 -04:00
Scott Feldman
6004c86718 switchdev: add bridge port flags attr
rocker: use switchdev get/set attr for bridge port flags

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12 18:43:54 -04:00
Scott Feldman
9228ad26ab rocker: use switchdev add/del obj for bridge port vlans
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12 18:43:54 -04:00
Scott Feldman
6fc3016da7 switchdev: add port vlan obj
VLAN obj has flags (PVID and untagged) as well as start and end vid ranges.
The switchdev driver can optimize programing the device using the ranges.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12 18:43:53 -04:00
Scott Feldman
491d0f1533 switchdev: introduce switchdev add/del obj ops
Like switchdev attr get/set, add new switchdev obj add/del.  switchdev objs
will be things like VLANs or FIB entries, so add/del fits better for
objects than get/set used for attributes.

Use same two-phase prepare-commit transaction model as in attr set.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12 18:43:53 -04:00
Scott Feldman
3563606258 switchdev: convert STP update to switchdev attr set
STP update is just a settable port attribute, so convert
switchdev_port_stp_update to an attr set.

For DSA, the prepare phase is skipped and STP updates are only done in the
commit phase.  This is because currently the DSA drivers don't need to
allocate any memory for STP updates and the STP update will not fail to HW
(unless something horrible goes wrong on the MDIO bus, in which case the
prepare phase wouldn't have been able to predict anyway).

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12 18:43:53 -04:00