The mutex lock is not used at all, remove it.
The *vmmc_regulator is not necessary, use a local variable in
stw481x_vmmc_regulator_probe() instead.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Use netif_carrier_off() first, since that will prevent the stack from
queuing more packets to this IF. This operation is fast, and should
behave much nicer when trying to bring down an interface under load.
Reported-by: Eliezer Tamir <eliezer.tamir@linux.intel.com>
Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Use netif_carrier_off() first, since that will prevent the stack from
queuing more packets to this IF. This operation is fast, and should
behave much nicer when trying to bring down an interface under load.
Reported-by: Eliezer Tamir <eliezer.tamir@linux.intel.com>
Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
The call to e1000e_write_protect_nvm_ich8lan() is no longer supported by HW.
Access to these registers causes a system freeze in A step hardware and is
ignored in B step hardware. This function must not be called in hardware
newer than LPT.
Signed-off-by: Yanir Lubetkin <yanirx.lubetkin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
When bringing down an interface netif_carrier_off() should be
one the first things we do, since this will prevent the stack
from queuing more packets to this interface.
This operation is very fast, and should make the device behave
much nicer when trying to bring down an interface under load.
Also, this would Do The Right Thing (TM) if this device has some
sort of fail-over teaming and redirect traffic to the other IF.
Move netif_carrier_off as early as possible.
Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
When bringing down an interface netif_carrier_off() should be
one the first things we do, since this will prevent the stack
from queuing more packets to this interface.
This operation is very fast, and should make the device behave
much nicer when trying to bring down an interface under load.
Also, this would Do The Right Thing (TM) if this device has some
sort of fail-over teaming and redirect traffic to the other IF.
Move netif_carrier_off as early as possible.
Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* pm-cpuidle:
cpuidle: mvebu: Update cpuidle thresholds for Armada XP SOCs
cpuidle: mvebu: Fix the CPU PM notifier usage
* powercap:
powercap / RAPL: handle domains with different energy units
* irq-pm:
rtc: at91rm9200: double locking bug in at91_rtc_interrupt()
* acpi-resources:
Revert "x86/PCI: Refine the way to release PCI IRQ resources"
drivers/md/md-cluster.c:190:6: sparse: symbol 'recover_bitmaps' was not declared. Should it be static?
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
A --cluster-confirm without an --add (by another node) can
crash the kernel.
Fix it by guarding it using a state.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Add suspend/resume support for the mvebu PCIe host driver. Without this
commit, the system will panic at resume time when PCIe devices are
connected.
Note that we have to use the ->suspend_noirq() and ->resume_noirq() hooks,
because at resume time, the PCI fixups are done at ->resume_noirq() time,
so the PCIe controller has to be ready at this point.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Daniel Borkmann says:
====================
This set adds native eBPF support also to act_bpf and thus covers tc
with eBPF in the classifier *and* action part.
A link to iproute2 preview has been provided in patch 2 and the code
will be pushed out after Stephen has processed the classifier part
and helper bits for tc.
This set depends on ced585c83b ("act_bpf: allow non-default TC_ACT
opcodes as BPF exec outcome"), so a net into net-next merge would be
required first. Hope that's fine by you, Dave. ;)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This work extends the "classic" BPF programmable tc action by extending
its scope also to native eBPF code!
Together with commit e2e9b6541d ("cls_bpf: add initial eBPF support
for programmable classifiers") this adds the facility to implement fully
flexible classifier and actions for tc that can be implemented in a C
subset in user space, "safely" loaded into the kernel, and being run in
native speed when JITed.
Also, since eBPF maps can be shared between eBPF programs, it offers the
possibility that cls_bpf and act_bpf can share data 1) between themselves
and 2) between user space applications. That means that, f.e. customized
runtime statistics can be collected in user space, but also more importantly
classifier and action behaviour could be altered based on map input from
the user space application.
For the remaining details on the workflow and integration, see the cls_bpf
commit e2e9b6541d. Preliminary iproute2 part can be found under [1].
[1] http://git.breakpoint.cc/cgit/dborkman/iproute2.git/log/?h=ebpf-act
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to prepare eBPF support for tc action, we need to add
sched_act_type, so that the eBPF verifier is aware of what helper
function act_bpf may use, that it can load skb data and read out
currently available skb fields.
This is bascially analogous to 96be4325f4 ("ebpf: add sched_cls_type
and map it to sk_filter's verifier ops").
BPF_PROG_TYPE_SCHED_CLS and BPF_PROG_TYPE_SCHED_ACT need to be
separate since both will have a different set of functionality in
future (classifier vs action), thus we won't run into ABI troubles
when the point in time comes to diverge functionality from the
classifier.
The future plan for act_bpf would be that it will be able to write
into skb->data and alter selected fields mirrored in struct __sk_buff.
For an initial support, it's sufficient to map it to sk_filter_ops.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Pirko <jiri@resnulli.us>
Reviewed-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts:
drivers/net/ethernet/emulex/benet/be_main.c
net/core/sysctl_net_core.c
net/ipv4/inet_diag.c
The be_main.c conflict resolution was really tricky. The conflict
hunks generated by GIT were very unhelpful, to say the least. It
split functions in half and moved them around, when the real actual
conflict only existed solely inside of one function, that being
be_map_pci_bars().
So instead, to resolve this, I checked out be_main.c from the top
of net-next, then I applied the be_main.c changes from 'net' since
the last time I merged. And this worked beautifully.
The inet_diag.c and sysctl_net_core.c conflicts were simple
overlapping changes, and were easily to resolve.
Signed-off-by: David S. Miller <davem@davemloft.net>
If ->run() fails, it can either free the data structures it
allocated, or leave that task to ->free() which will be called
on failures.
However:
md.c calls ->free() even if ->private_data is NULL, which
causes problems in some personalities.
raid0.c frees the data, but doesn't clear ->private_data,
which will become a problem when we fix md.c
So better fix both these issues at once.
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Fixes: 5aa61f427e
URL: https://bugzilla.kernel.org/show_bug.cgi?id=94381
Signed-off-by: NeilBrown <neilb@suse.de>
We need to include linux/errno.h in rhashtable.h since it doesn't
always get included otherwise.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
They are all auto-generated files during the perf building.
Before this patch:
$ git status
Untracked files:
(use "git add <file>..." to include in what will be committed)
config/feature-checks/test-all.make.output
config/feature-checks/test-backtrace.make.output
config/feature-checks/test-bionic.make.output
config/feature-checks/test-dwarf.make.output
config/feature-checks/test-fortify-source.make.output
config/feature-checks/test-glibc.make.output
config/feature-checks/test-gtk2-infobar.make.output
config/feature-checks/test-gtk2.make.output
config/feature-checks/test-libaudit.make.output
config/feature-checks/test-libbabeltrace.make.output
config/feature-checks/test-libbfd.make.output
config/feature-checks/test-libdw-dwarf-unwind.make.output
config/feature-checks/test-libelf-getphdrnum.make.output
config/feature-checks/test-libelf-mmap.make.output
config/feature-checks/test-libelf.make.output
config/feature-checks/test-libnuma.make.output
config/feature-checks/test-libperl.make.output
config/feature-checks/test-libpython-version.make.output
config/feature-checks/test-libpython.make.output
config/feature-checks/test-libslang.make.output
config/feature-checks/test-libunwind.make.output
config/feature-checks/test-pthread-attr-setaffinity-np.make.output
config/feature-checks/test-stackprotector-all.make.output
config/feature-checks/test-sync-compare-and-swap.make.output
config/feature-checks/test-timerfd.make.output
config/feature-checks/test-zlib.make.output
After this patch:
$ git status
nothing to commit, working directory clean
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426821638-11227-3-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since commit 4ae61202b3 ("perf build: Rename PERF-FEATURES into
FEATURE-DUMP") renames PERF-FEATURES into FEATURE-DUMP, the .gitignore
file should also do this thing for consistency.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426821638-11227-2-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Both 'perf diff' and 'perf mem' have 'field-separator' option, which
causes segfault if passed with empty string. This patch uses previously
introduced 'OPT_STRING_NOEMPTY' option macro to prevent fault.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: pi3orama@163.com
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1426820272-23302-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
int build_id_cache__add_s(const char *sbuild_id, const char *debugdir,
const char *name, bool is_kallsyms, bool is_vdso)
{
...
if (access(filename, F_OK)) {
^--------------------------------------------------------- [1]
if (is_kallsyms) {
if (copyfile("/proc/kallsyms", filename))
goto out_free;
} else if (link(realname, filename) && copyfile(name, filename))
^-----------------------------^------------- [2]
\------------ [3]
goto out_free;
}
...
When multiple instances of perf record get to [1] at more or less same time and
run access() one or more may get failure because the file does not exist yet
(since the first instance did not have chance to link it yet).
At this point the race moves to link() at [2] where first thread to get
there links file and goes on but second one gets -EEXIST so it runs
copyfile [3] which truncates the file.
reproducer:
rm -rf /root/.debug
for cpu in $(awk '/processor/ {print $3}' /proc/cpuinfo); do
perf record -a -v -T -F 1000 -C $cpu \
-o perf-${cpu}.data sleep 5 2> /dev/null &
done
wait
and simply search for empty files by:
find /lib/modules/`uname -r`/kernel/* -size 0
Signed-off-by: Milos Vyletel <milos@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1426847846-11112-1-git-send-email-milos@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tom Lendacky says:
====================
amd-xgbe: AMD XGBE driver updates 2015-03-19
The following series of patches includes functional updates and changes
to the driver.
- Use the phydev->advertising field instead of the phydev->supported
field when configuring for auto-negotiation, etc.
- Use the phy_driver flags field for setting the transceiver type
instead of hardcoding it in the ethtool support.
- Provide an auto-negotiation timeout check
- Clarify the Tx/Rx queue information messages
- Use the new DMA memory barrier operations
- Set the device DMA mask based on what the hardware reports
- Remove the software implementation of Tx coalescing
- Fix the reporting of the Rx coalescing value
- Use napi_alloc_skb when allocating an SKB in softirq
This patch series is based on net-next.
Changes from v2:
- Use jiffies instead of timespec for the auto-negotiation timeout check
- Remove the Rx path SKB allocation re-work patch since we should only
inline the headers and the current code guards better against any
hardware bugs
Changes from v1:
- Default to 32-bit DMA width (minimum supported) if hardware returns
an unexpected DMA width value
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the napi_alloc_skb function to allocate an skb when running within
the softirq context to avoid calls to local_irq_save/restore.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Rx coalescing value is internally converted from usecs to a value
that the hardware can use. When reporting the Rx coalescing value, this
internal value is converted back to usecs. During the conversion from
and back to usecs some rounding occurs. So, for example, when setting an
Rx usec of 30, it will be reported as 29. Fix this reporting issue by
keeping the original usec value and using that during reporting.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Tx coalescing support in the driver was a software implementation
for something lacking in the hardware. Using hrtimers, the idea was to
trigger a timer interrupt after having queued a packet for transmit.
Unfortunately, as the timer value was lowered, the timer expired before
the hardware actually did the transmit and so it was racey and resulted
in unnecessary interrupts.
Remove the Tx coalescing support and hrtimer and replace with a Tx timer
that is used as a reclaim timer in case of inactivity.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The hardware supplies a value that indicates the DMA range that it
is capable of using. Use this value rather than hard-coding it in
the driver.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the new lighter weight memory barriers when working with the device
descriptors.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Clarify that the queues referred to in a message when the device is
brought up are hardware queues and not necessarily related to the
Linux network queues.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, there is no interrupt code that indicates auto-negotiation
has timed out. If the auto-negotiation has timed out then the start of
a new auto-negotiation will begin again with a new base page being
received. The state machine could be in a state that is not expecting
this interrupt code which results in an error during auto-negotiation.
Update the code to timestamp when the auto-negotiation starts. Should
another page received interrupt code occur before auto-negotiation has
completed but after the auto-negotiation timeout, then reset the state
machine to allow the auto-negotiation to continue.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove the setting of the transceiver type when retrieving the device
settings using ethtool and instead set the transceiver type in the
phy_driver structure flags field. Change the transceiver type to be
internal, also.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With ethtool being able to control what is advertised, the advertising
field is what should be used for priming the auto-negotiation registers
and for various other checks, instead of the supported field.
Also, move the initial setting of the supported and advertising fields
into the probe function so that they are not reset each time the device
is brought up, thus allowing the user to set as desired before bringing
the device up.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit db31c55a6f (net: clamp ->msg_namelen instead of returning an
error) introduced the clamping of msg_namelen when the unsigned value
was larger than sizeof(struct sockaddr_storage). This caused a
msg_namelen of -1 to be valid. The native code was subsequently fixed by
commit dbb490b965 (net: socket: error on a negative msg_namelen).
In addition, the native code sets msg_namelen to 0 when msg_name is
NULL. This was done in commit (6a2a2b3ae0 net:socket: set msg_namelen
to 0 if msg_name is passed as NULL in msghdr struct from userland) and
subsequently updated by 08adb7dabd (fold verify_iovec() into
copy_msghdr_from_user()).
This patch brings the get_compat_msghdr() in line with
copy_msghdr_from_user().
Fixes: db31c55a6f (net: clamp ->msg_namelen instead of returning an error)
Cc: David S. Miller <davem@davemloft.net>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu says:
====================
rhashtable: Introduce inlined interface
This series of patches introduces the inlined rhashtable interface.
The idea is to make all the function pointers visible to the compiler
by providing the rhashtable_params structure explicitly to each
inline rhashtable function. For example, instead of doing
obj = rhashtable_lookup(ht, key);
you would now do
obj = rhashtable_lookup_fast(ht, key, params);
Where params is the same data that you would give to rhashtable_init.
In particular, within rhashtable.c itself we would simply supply
ht->p.
So to convert users over, you simply have to make params globally
accessible, e.g., by placing it in a static const variable, which
can then be used at each inlined call site, as well as by the
rhashtable_init call.
The only ticky bit is that some users (i.e., netfilter) has a
dynamic key length. This is dealt with by using params.key_len
in the inline functions when it is non-zero, and otherwise falling
back on ht->p.key_len.
Note that I've only tested this on one compiler, gcc 4.7.2. So
please test this with your compilers as well and make sure that
the code is actually inlined without indirect function calls.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that all rhashtable users have been converted over to the
inline interface, this patch removes the unused out-of-line
interface.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch converts tipc to the inlined rhashtable interface.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch converts test_rhashtable to the inlined rhashtable
interface.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch converts nft_hash to the inlined rhashtable interface.
This patch also replaces the call to rhashtable_lookup_compare with
a straight rhashtable_lookup_fast because it's simply doing a memcmp
(in fact nft_hash_lookup already uses memcmp instead of nft_data_cmp).
Furthermore, the compare function is only meant to compare, it is not
supposed to have side-effects. The current side-effect code can
simply be moved into the nft_hash_get.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the name space is a de facto key because it has to match
before we find an object in the hash table. However, it isn't in
the hash value so all objects from different name spaces with the
same port ID hash to the same bucket.
This is bad as the number of name spaces is unbounded.
This patch fixes this by using the namespace when doing the hash.
Because the namespace field doesn't lie next to the portid field
in the netlink socket, this patch switches over to the rhashtable
interface without a fixed key.
This patch also uses the new inlined rhashtable interface where
possible.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch deals with the complaint that we make indirect function
calls on the fast paths unnecessarily in rhashtable. We resolve
it by moving the fast paths into inline functions that take struct
rhashtable_param (which obviously must be the same set of parameters
supplied to rhashtable_init) as an argument.
The only remaining indirect call is to obj_hashfn (or key_hashfn it
obj_hashfn is unset) on the rehash as well as the insert-during-
rehash slow path.
This patch also extends the support of vairable-length keys to
include those where the key is fixed but scattered in the object.
For example, in netlink we want to key off the namespace and the
portid but they're not next to each other.
This patch does this by directly using the object hash function
as the indicator of whether the key is accessible or not. It
also adds a new function obj_cmpfn to compare a key against an
object. This means that the caller no longer needs to supply
explicit compare functions.
All this is done in a backwards compatible manner so no existing
users are affected until they convert to the new interface.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch marks the rhashtable_init params argument const as
there is no reason to modify it since we will always make a copy
of it in the rhashtable.
This patch also fixes a bug where we don't actually round up the
value of min_size unless it is less than HASH_MIN_SIZE.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix commit 9cf514ccfa (nfsd: implement pNFS operations).
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit c249739579 ("bpf: allow BPF programs access 'protocol' and 'vlan_tci'
fields") has added support for accessing protocol, vlan_present and vlan_tci
into the skb offset map.
As referenced in the below discussion, accessing skb->protocol from an eBPF
program should be converted without handling endianess.
The reason for this is that an eBPF program could simply do a check more
naturally, by f.e. testing skb->protocol == htons(ETH_P_IP), where the LLVM
compiler resolves htons() against a constant automatically during compilation
time, as opposed to an otherwise needed run time conversion.
After all, the way of programming both from a user perspective differs quite
a lot, i.e. bpf_asm ["ld proto"] versus a C subset/LLVM.
Reference: https://patchwork.ozlabs.org/patch/450819/
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This helps debug issues with VLAN modifications that are otherwise
not really visible in any tracing/debugging.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This patch expose controller quirks through debugfs. It would be
useful for BlueZ tests using vhci. Currently there is no way to
test quirk dependent behaviour. It might be also useful for manual
testing.
Signed-off-by: Jakub Pawlowski <jpawlowski@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@r@
type T;
identifier f;
@@
static T f (...) { ... }
@@
identifier r.f;
declarer name EXPORT_SYMBOL;
@@
-EXPORT_SYMBOL(f);
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This patch converts the fabric module autoload failures from
pr_err to pr_debug in target_core_register_fabric() code, to
reduce the amount of noise during normal operation.
Reported-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Current implementation doesn't zero out the pages allocated.
Honor the __GFP_ZERO flag and zero out if set.
Cc: <stable@vger.kernel.org> # v3.14+
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The following errors/warnings issued by checkpatch.pl --strict have been fixed:
drivers/spi/spi-bcm2835.c:182: CHECK: Alignment should match open parenthesis
drivers/spi/spi-bcm2835.c:191: CHECK: braces {} should be used on all arms of this statement
drivers/spi/spi-bcm2835.c:234: CHECK: Alignment should match open parenthesis
drivers/spi/spi-bcm2835.c:256: CHECK: Alignment should match open parenthesis
drivers/spi/spi-bcm2835.c:271: CHECK: Alignment should match open parenthesis
drivers/spi/spi-bcm2835.c:346: CHECK: Alignment should match open parenthesis
total: 0 errors, 0 warnings, 6 checks, 403 lines checked
In 2 locations the arguments had to get split/moved to the next line so that the
line width stays below 80 chars.
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit baf606d9c9 ("ipv4,ipv6: grab rtnl before locking the socket")
missed to update two setsockopt options, IPV6_JOIN_ANYCAST and
IPV6_LEAVE_ANYCAST, causing a lock inverstion regarding to the updated ones.
As ipv6_sock_ac_join and ipv6_sock_ac_leave are only called from
do_ipv6_setsockopt, we are good to just move the rtnl lock upper.
Fixes: baf606d9c9 ("ipv4,ipv6: grab rtnl before locking the socket")
Reported-by: Ying Huang <ying.huang@intel.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>