Commit graph

119,404 commits

Author SHA1 Message Date
David S. Miller
9f6e055907 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
The mptcp conflict was overlapping additions.

The SMC conflict was an additional and removal happening at the same
time.

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27 18:31:39 -08:00
Eli Cohen
96e326878f net/mlx5e: Eswitch, Use per vport tables for mirroring
When using port mirroring, we forward the traffic to another table and
use that table to forward to the mirrored vport. Since the hardware
loses the values of reg c, and in particular reg c0, we fail the match
on the input vport which previously existed in reg c0. To overcome this
situation, we use a set of per vport tables, positioned at the lowest
priority, and forward traffic to those tables. Since these tables are
per vport, we can avoid matching on reg c0.

Fixes: c01cfd0f11 ("net/mlx5: E-Switch, Add match on vport metadata for rule in fast path")
Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-02-27 16:40:05 -08:00
Kalyani Akula
057a0fb649 firmware: xilinx: Add ZynqMP aes API for AES functionality
Add ZynqMP firmware AES API to perform encryption/decryption of given data.

Signed-off-by: Kalyani Akula <kalyani.akula@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-02-28 08:36:46 +08:00
Linus Torvalds
7058b83789 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from David Miller:

 1) Fix leak in nl80211 AP start where we leak the ACL memory, from
    Johannes Berg.

 2) Fix double mutex unlock in mac80211, from Andrei Otcheretianski.

 3) Fix RCU stall in ipset, from Jozsef Kadlecsik.

 4) Fix devlink locking in devlink_dpipe_table_register, from Madhuparna
    Bhowmik.

 5) Fix race causing TX hang in ll_temac, from Esben Haabendal.

 6) Stale eth hdr pointer in br_dev_xmit(), from Nikolay Aleksandrov.

 7) Fix TX hash calculation bounds checking wrt. tc rules, from Amritha
    Nambiar.

 8) Size netlink responses properly in schedule action code to take into
    consideration TCA_ACT_FLAGS. From Jiri Pirko.

 9) Fix firmware paths for mscc PHY driver, from Antoine Tenart.

10) Don't register stmmac notifier multiple times, from Aaro Koskinen.

11) Various rmnet bug fixes, from Taehee Yoo.

12) Fix vsock deadlock in vsock transport release, from Stefano
    Garzarella.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits)
  net: dsa: mv88e6xxx: Fix masking of egress port
  mlxsw: pci: Wait longer before accessing the device after reset
  sfc: fix timestamp reconstruction at 16-bit rollover points
  vsock: fix potential deadlock in transport->release()
  unix: It's CONFIG_PROC_FS not CONFIG_PROCFS
  net: rmnet: fix packet forwarding in rmnet bridge mode
  net: rmnet: fix bridge mode bugs
  net: rmnet: use upper/lower device infrastructure
  net: rmnet: do not allow to change mux id if mux id is duplicated
  net: rmnet: remove rcu_read_lock in rmnet_force_unassociate_device()
  net: rmnet: fix suspicious RCU usage
  net: rmnet: fix NULL pointer dereference in rmnet_changelink()
  net: rmnet: fix NULL pointer dereference in rmnet_newlink()
  net: phy: marvell: don't interpret PHY status unless resolved
  mlx5: register lag notifier for init network namespace only
  unix: define and set show_fdinfo only if procfs is enabled
  hinic: fix a bug of rss configuration
  hinic: fix a bug of setting hw_ioctxt
  hinic: fix a irq affinity bug
  net/smc: check for valid ib_client_data
  ...
2020-02-27 16:34:41 -08:00
Gustavo A. R. Silva
d7f10df862 bpf: Replace zero-length array with flexible-array member
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200227001744.GA3317@embeddedor
2020-02-28 01:21:02 +01:00
Sakari Ailus
7cbeb2e1bf media: smiapp: Move definitions under driver directory
include/media/i2c/smiapp.h was meant to serve systems where the sensor is
enumerated through platform data. That's no longer necessary, hopefully
not even in out-of-tree use cases. Move the definitions to the appropriate
headers.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2020-02-27 17:49:04 -03:00
Gustavo A. R. Silva
da60fbe7ef NFC: Replace zero-length array with flexible-array member
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27 12:06:20 -08:00
Russell King
5b502a7b29 net: dsa: propagate resolved link config via mac_link_up()
Propagate the resolved link configuration down via DSA's
phylink_mac_link_up() operation to allow split PCS/MAC to work.

Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27 12:02:14 -08:00
Russell King
91a208f218 net: phylink: propagate resolved link config via mac_link_up()
Propagate the resolved link parameters via the mac_link_up() call for
MACs that do not automatically track their PCS state. We propagate the
link parameters via function arguments so that inappropriate members
of struct phylink_link_state can't be accessed, and creating a new
structure just for this adds needless complexity to the API.

Tested-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27 12:02:14 -08:00
Linus Torvalds
278de45e14 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID subsystem fixes from Jiri Kosina:

 - syzkaller-reported error handling fixes in various drivers, from
   various people

 - increase of HID report buffer size to 8K, which is apparently needed
   by certain modern devices

 - a few new device-ID-specific fixes / quirks

 - battery charging status reporting fix in logitech-hidpp, from Filipe
   Laíns

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: hid-bigbenff: fix race condition for scheduled work during removal
  HID: hid-bigbenff: call hid_hw_stop() in case of error
  HID: hid-bigbenff: fix general protection fault caused by double kfree
  HID: i2c-hid: add Trekstor Surfbook E11B to descriptor override
  HID: alps: Fix an error handling path in 'alps_input_configured()'
  HID: hiddev: Fix race in in hiddev_disconnect()
  HID: core: increase HID report buffer size to 8KiB
  HID: core: fix off-by-one memset in hid_report_raw_event()
  HID: apple: Add support for recent firmware on Magic Keyboards
  HID: ite: Only bind to keyboard USB interface on Acer SW5-012 keyboard dock
  HID: logitech-hidpp: BatteryVoltage: only read chargeStatus if extPower is active
2020-02-27 11:13:27 -08:00
Christian Borntraeger
13da9ae1cd KVM: s390: protvirt: introduce and enable KVM_CAP_S390_PROTECTED
Now that everything is in place, we can announce the feature.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
2020-02-27 19:47:13 +01:00
Janosch Frank
e0d2773d48 KVM: s390: protvirt: UV calls in support of diag308 0, 1
diag 308 subcode 0 and 1 require several KVM and Ultravisor interactions.
Specific to these "soft" reboots are

* The "unshare all" UVC
* The "prepare for reset" UVC

Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
[borntraeger@de.ibm.com: patch merging, splitting, fixing]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-02-27 19:47:12 +01:00
Janosch Frank
19e1227768 KVM: S390: protvirt: Introduce instruction data area bounce buffer
Now that we can't access guest memory anymore, we have a dedicated
satellite block that's a bounce buffer for instruction data.

We re-use the memop interface to copy the instruction data to / from
userspace. This lets us re-use a lot of QEMU code which used that
interface to make logical guest memory accesses which are not possible
anymore in protected mode anyway.

Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
[borntraeger@de.ibm.com: patch merging, splitting, fixing]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-02-27 19:47:11 +01:00
Janosch Frank
29b40f105e KVM: s390: protvirt: Add initial vm and cpu lifecycle handling
This contains 3 main changes:
1. changes in SIE control block handling for secure guests
2. helper functions for create/destroy/unpack secure guests
3. KVM_S390_PV_COMMAND ioctl to allow userspace dealing with secure
machines

Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
[borntraeger@de.ibm.com: patch merging, splitting, fixing]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-02-27 19:47:11 +01:00
Dave Gerlach
65880ab160 ARM: OMAP2+: pm33xx-core: Extend platform_data ops for cpuidle
In order for am335x and am437x to properly enter deeper c-states in
cpuidle they must always call into the sleep33/43xx suspend code and
also sometimes invoke the wkup_m3_ipc driver. These are both controlled
by the pm33xx module so we must provide a method for the platform code
to call back into the module when it is available as the core cpuidle
ops that are invoked by the cpuidle-arm driver must remain as built in.

Extend the init platform op to take an idle function as an argument so
that we can use this to call into the pm33xx module for c-states that
need it. Also add a deinit op so we can unregister this idle function
from the PM core when the pm33xx module gets unloaded.

Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-02-27 09:27:27 -08:00
Dave Gerlach
06ee7a950b ARM: OMAP2+: pm33xx-core: Add cpuidle_ops for am335x/am437x
am335x and am437x can now make use of the generic cpuidle-arm driver.
This requires that we define init and suspend ops to be passed set as
the cpuidle ops for the SoC. These ops are invoked directly at the last
stage of the cpuidle-arm driver in order to allow low level platform
code to run and bring the CPU the rest of the way into it's desired idle
state. It is required that the CPUIDLE_METHOD_OF_DECLARE be called from
code that is built in so define these ops in pm33xx-core where the
always built-in portion of the PM code for these SoCs lives.

Additionally, although an soc_suspend function is already exposed by the
pm33xx platform code, it contains additional operations needed for full
SoC suspend beyond what is needed for a relatively simple CPU suspend
needed during cpuidle. To get around this introduce cpu_suspend ops to
be used by the am335x and am437x PM driver for the last stage of cpuidle
path.

Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-02-27 09:27:26 -08:00
Christian König
bd2275eeed dma-buf: drop dynamic_mapping flag
Instead use the pin() callback to detect dynamic DMA-buf handling.
Since amdgpu is now migrated it doesn't make much sense to keep
the extra flag.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/353997/?series=73646&rev=1
2020-02-27 14:58:01 +01:00
Christian König
bb42df4662 dma-buf: add dynamic DMA-buf handling v15
On the exporter side we add optional explicit pinning callbacks. Which are
called when the importer doesn't implement dynamic handling, move notification
or need the DMA-buf locked in place for its use case.

On the importer side we add an optional move_notify callback. This callback is
used by the exporter to inform the importers that their mappings should be
destroyed as soon as possible.

This allows the exporter to provide the mappings without the need to pin
the backing store.

v2: don't try to invalidate mappings when the callback is NULL,
    lock the reservation obj while using the attachments,
    add helper to set the callback
v3: move flag for invalidation support into the DMA-buf,
    use new attach_info structure to set the callback
v4: use importer_priv field instead of mangling exporter priv.
v5: drop invalidation_supported flag
v6: squash together with pin/unpin changes
v7: pin/unpin takes an attachment now
v8: nuke dma_buf_attachment_(map|unmap)_locked,
    everything is now handled backward compatible
v9: always cache when export/importer don't agree on dynamic handling
v10: minimal style cleanup
v11: drop automatically re-entry avoidance
v12: rename callback to move_notify
v13: add might_lock in appropriate places
v14: rebase on separated locking change
v15: add EXPERIMENTAL flag, some more code comments

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/353993/?series=73646&rev=1
2020-02-27 14:58:00 +01:00
Gerd Hoffmann
1cad629257 drm/shmem: add support for per object caching flags.
Add map_cached bool to drm_gem_shmem_object, to request cached mappings
on a per-object base.  Check the flag before adding writecombine to
pgprot bits.

Cc: stable@vger.kernel.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Tested-by: Guillaume Gardet <Guillaume.Gardet@arm.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200226154752.24328-2-kraxel@redhat.com
2020-02-27 13:54:38 +01:00
afzal mohammed
cc2550b421 clocksource: Replace setup_irq() by request_irq()
request_irq() is preferred over setup_irq(). The early boot setup_irq()
invocations happen either via 'init_IRQ()' or 'time_init()', while
memory allocators are ready by 'mm_init()'.

Per tglx[1], setup_irq() existed in olden days when allocators were not
ready by the time early interrupts were initialized.

Hence replace setup_irq() by request_irq().

Seldom remove_irq() usage has been observed coupled with setup_irq(),
wherever that has been found, it too has been replaced by free_irq().

A build error that was reported by kbuild test robot <lkp@intel.com>
in the previous version of the patch also has been fixed.

[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos

Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/91961c77c1cf93d41523f5e1ac52043f32f97077.1582799709.git.afzal.mohd.ma@gmail.com
2020-02-27 12:15:24 +01:00
Jani Nikula
83d2bdb6a0 drm/i915: significantly reduce the use of <drm/i915_drm.h>
The #include has been splattered all over the place, but there are
precious few places, all .c files, that actually need it.

v2: remove leftover double newlines

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200225133131.3301-1-jani.nikula@intel.com
2020-02-27 08:35:09 +02:00
Christian Brauner
b8f33e5d76 device: add device_change_owner()
Add a helper to change the owner of a device's sysfs entries. This
needs to happen when the ownership of a device is changed, e.g. when
moving network devices between network namespaces.
This function will be used to correctly account for ownership changes,
e.g. when moving network devices between network namespaces.

Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26 20:07:25 -08:00
Christian Brauner
2c4f9401ce sysfs: add sysfs_change_owner()
Add a helper to change the owner of sysfs objects.
This function will be used to correctly account for kobject ownership
changes, e.g. when moving network devices between network namespaces.

This mirrors how a kobject is added through driver core which in its guts is
done via kobject_add_internal() which in summary creates the main directory via
create_dir(), populates that directory with the groups associated with the
ktype of the kobject (if any) and populates the directory with the basic
attributes associated with the ktype of the kobject (if any). These are the
basic steps that are associated with adding a kobject in sysfs.
Any additional properties are added by the specific subsystem itself (not by
driver core) after it has registered the device. So for the example of network
devices, a network device will e.g. register a queue subdirectory under the
basic sysfs directory for the network device and than further subdirectories
within that queues subdirectory.  But that is all specific to network devices
and they call the corresponding sysfs functions to do that directly when they
create those queue objects. So anything that a subsystem adds outside of what
driver core does must also be changed by it (That's already true for removal of
files it created outside of driver core.) and it's the same for ownership
changes.

Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26 20:07:25 -08:00
Christian Brauner
303a42769c sysfs: add sysfs_group{s}_change_owner()
Add helpers to change the owner of sysfs groups.
This function will be used to correctly account for kobject ownership
changes, e.g. when moving network devices between network namespaces.

Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26 20:07:25 -08:00
Christian Brauner
0666a3aee7 sysfs: add sysfs_link_change_owner()
Add a helper to change the owner of a sysfs link.
This function will be used to correctly account for kobject ownership
changes, e.g. when moving network devices between network namespaces.

Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26 20:07:25 -08:00
Christian Brauner
f70ce18568 sysfs: add sysfs_file_change_owner()
Add helpers to change the owner of a sysfs files.
This function will be used to correctly account for kobject ownership
changes, e.g. when moving network devices between network namespaces.

Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26 20:07:25 -08:00
David S. Miller
574b238f64 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes:

1) Perform garbage collection from workqueue to fix rcu detected
   stall in ipset hash set types, from Jozsef Kadlecsik.

2) Fix the forceadd evaluation path, also from Jozsef.

3) Fix nft_set_pipapo selftest, from Stefano Brivio.

4) Crash when add-flush-add element in pipapo set, also from Stefano.
   Add test to cover this crash.

5) Remove sysctl entry under mutex in hashlimit, from Cong Wang.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26 16:30:17 -08:00
Linus Torvalds
91ad64a84e Tracing updates:
Change in API of bootconfig (before it comes live in a release)
   - Have a magic value "BOOTCONFIG" in initrd to know a bootconfig exists
   - Set CONFIG_BOOT_CONFIG to 'n' by default
   - Show error if "bootconfig" on cmdline but not compiled in
   - Prevent redefining the same value
   - Have a way to append values
   - Added a SELECT BLK_DEV_INITRD to fix a build failure
 
  Synthetic event fixes:
   - Switch to raw_smp_processor_id() for recording CPU value in preempt
     section. (No care for what the value actually is)
   - Fix samples always recording u64 values
   - Fix endianess
   - Check number of values matches number of fields
   - Fix a printing bug
 
  Fix of trace_printk() breaking postponed start up tests
 
  Make a function static that is only used in a single file.
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXlW4vxQccm9zdGVkdEBn
 b29kbWlzLm9yZwAKCRAp5XQQmuv6qtioAP0WLEm3dWO0z3321h/a0DSshC+Bslu3
 HDPTsGVGrXmvggEA/lr1ikRHd8PsO7zW8BfaZMxoXaTqXiuSrzEWxnMlFw0=
 =O8PM
 -----END PGP SIGNATURE-----

Merge tag 'trace-v5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing and bootconfig updates:
 "Fixes and changes to bootconfig before it goes live in a release.

  Change in API of bootconfig (before it comes live in a release):
  - Have a magic value "BOOTCONFIG" in initrd to know a bootconfig
    exists
  - Set CONFIG_BOOT_CONFIG to 'n' by default
  - Show error if "bootconfig" on cmdline but not compiled in
  - Prevent redefining the same value
  - Have a way to append values
  - Added a SELECT BLK_DEV_INITRD to fix a build failure

  Synthetic event fixes:
  - Switch to raw_smp_processor_id() for recording CPU value in preempt
    section. (No care for what the value actually is)
  - Fix samples always recording u64 values
  - Fix endianess
  - Check number of values matches number of fields
  - Fix a printing bug

  Fix of trace_printk() breaking postponed start up tests

  Make a function static that is only used in a single file"

* tag 'trace-v5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  bootconfig: Fix CONFIG_BOOTTIME_TRACING dependency issue
  bootconfig: Add append value operator support
  bootconfig: Prohibit re-defining value on same key
  bootconfig: Print array as multiple commands for legacy command line
  bootconfig: Reject subkey and value on same parent key
  tools/bootconfig: Remove unneeded error message silencer
  bootconfig: Add bootconfig magic word for indicating bootconfig explicitly
  bootconfig: Set CONFIG_BOOT_CONFIG=n by default
  tracing: Clear trace_state when starting trace
  bootconfig: Mark boot_config_checksum() static
  tracing: Disable trace_printk() on post poned tests
  tracing: Have synthetic event test use raw_smp_processor_id()
  tracing: Fix number printing bug in print_synth_event()
  tracing: Check that number of vals matches number of synth event fields
  tracing: Make synth_event trace functions endian-correct
  tracing: Make sure synth_event_trace() example always uses u64
2020-02-26 10:34:42 -08:00
Mark Brown
8ae7fdc359
ASoC: Add Multi CPU DAI support
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:

As discussed in [1], ASoC core supports multi codec DAIs
on a DAI link. However it does not do so for CPU DAIs.

So, add support for multi CPU DAIs on a DAI Link by adding
multi CPU DAI in Card instantiation, suspend and resume
functions, PCM ops, stream handling functions and DAPM.

[1]: https://www.spinics.net/lists/alsa-devel/msg71369.html

changes in v5:
- rebase to latest kernel base

Bard Liao (2):
  ASoC: Return error if the function does not support multi-cpu
  ASoC: pcm: check if cpu-dai supports a given stream

Shreyas NC (4):
  ASoC: Add initial support for multiple CPU DAIs
  ASoC: Add multiple CPU DAI support for PCM ops
  ASoC: Add dapm_add_valid_dai_widget helper
  ASoC: Add multiple CPU DAI support in DAPM

 include/sound/soc.h                   |  15 +
 sound/soc/soc-compress.c              |   5 +-
 sound/soc/soc-core.c                  | 168 +++++-----
 sound/soc/soc-dapm.c                  | 133 ++++----
 sound/soc/soc-generic-dmaengine-pcm.c |  18 +
 sound/soc/soc-pcm.c                   | 463 ++++++++++++++++++--------
 6 files changed, 531 insertions(+), 271 deletions(-)

--
2.17.1
2020-02-26 18:14:19 +00:00
Tony Lindgren
7324a7a0d5 bus: ti-sysc: Implement display subsystem reset quirk
The display subsystem (DSS) needs the child outputs disabled for reset.
In order to prepare to probe DSS without legacy platform data, let's
implement sysc_pre_reset_quirk_dss() similar to what we have for the
platform data with omap_dss_reset().

Note that we cannot directly use the old omap_dss_reset() without
platform data callbacks and updating omap_dss_reset() to understand
struct device. And we will be dropping omap_dss_reset() anyways when
all the SoCs are probing with device tree, so let's not mess with the
legacy code at all.

Cc: Jyri Sarha <jsarha@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-02-26 10:03:36 -08:00
Tony Lindgren
e8639e1c98 bus: ti-sysc: Handle module unlock quirk needed for some RTC
The RTC modules on am3 and am4 need quirk handling to unlock and lock
them for reset so let's add the quirk handling based on what we already
have for legacy platform data. In later patches we will simply drop the
RTC related platform data and the old quirk handling.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-02-26 10:03:35 -08:00
Tony Lindgren
feaa8baee8 bus: ti-sysc: Implement SoC revision handling
We need to know SoC type and features for cases where the same SoC
may be installed in various versions on the same board and would need
a separate dts file otherwise for the different variants.

For example, am3703 is pin compatible with omap3630, but has sgx and
iva accelerators disabled. We must not try to access the sgx or iva
module registers on am3703, and need to set the unavailable devices
disabled early.

Let's also detect omap3430 as that is needed for display subsystem
(DSS) reset later on, and GP vs EMU or HS devices. Further SoC
specific disabled device detection can be added as needed, such as
dra71x vs dra76x rtc and usb4.

Cc: Adam Ford <aford173@gmail.com>
Cc: André Hentschel <nerv@dawncrow.de>
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Cc: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-02-26 10:03:35 -08:00
Pierre-Louis Bossart
36d73c4a9e
ASoC: soc-dai: add get_sdw_stream() callback
We only have a set() operation, provide the dual get() operation to
retrieve the stream information.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200225170041.23644-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-02-26 17:50:37 +00:00
Shreyas NC
76afa64374
ASoC: Add initial support for multiple CPU DAIs
ASoC core supports multiple codec DAIs but supports only a CPU DAI.
To support multiple cpu DAIs, add cpu_dai and num_cpu_dai in
snd_soc_dai_link and snd_soc_pcm_runtime structures similar to
support for codec_dai. This is intended as a preparatory patch to
eventually support the unification of the Codec and CPU DAI.

Inline with multiple codec DAI approach, add support to allocate,
init, bind and probe multiple cpu_dai on init if driver specifies
that. Also add support to loop over multiple cpu_dai during
suspend and resume.

This is intended as a preparatory patch to eventually unify the CPU
and Codec DAI into DAI components.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Shreyas NC <shreyas.nc@intel.com>
Link: https://lore.kernel.org/r/20200225133917.21314-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-02-26 17:35:00 +00:00
Ingo Molnar
e9765680a3 EFI updates for v5.7:
This time, the set of changes for the EFI subsystem is much larger than
 usual. The main reasons are:
 - Get things cleaned up before EFI support for RISC-V arrives, which will
   increase the size of the validation matrix, and therefore the threshold to
   making drastic changes,
 - After years of defunct maintainership, the GRUB project has finally started
   to consider changes from the distros regarding UEFI boot, some of which are
   highly specific to the way x86 does UEFI secure boot and measured boot,
   based on knowledge of both shim internals and the layout of bootparams and
   the x86 setup header. Having this maintenance burden on other architectures
   (which don't need shim in the first place) is hard to justify, so instead,
   we are introducing a generic Linux/UEFI boot protocol.
 
 Summary of changes:
 - Boot time GDT handling changes (Arvind)
 - Simplify handling of EFI properties table on arm64
 - Generic EFI stub cleanups, to improve command line handling, file I/O,
   memory allocation, etc.
 - Introduce a generic initrd loading method based on calling back into
   the firmware, instead of relying on the x86 EFI handover protocol or
   device tree.
 - Introduce a mixed mode boot method that does not rely on the x86 EFI
   handover protocol either, and could potentially be adopted by other
   architectures (if another one ever surfaces where one execution mode
   is a superset of another)
 - Clean up the contents of struct efi, and move out everything that
   doesn't need to be stored there.
 - Incorporate support for UEFI spec v2.8A changes that permit firmware
   implementations to return EFI_UNSUPPORTED from UEFI runtime services at
   OS runtime, and expose a mask of which ones are supported or unsupported
   via a configuration table.
 - Various documentation updates and minor code cleanups (Heinrich)
 - Partial fix for the lack of by-VA cache maintenance in the decompressor
   on 32-bit ARM. Note that these patches were deliberately put at the
   beginning so they can be used as a stable branch that will be shared with
   a PR containing the complete fix, which I will send to the ARM tree.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEnNKg2mrY9zMBdeK7wjcgfpV0+n0FAl5S7WYACgkQwjcgfpV0
 +n1jmQgAmwV3V8pbgB4mi4P2Mv8w5Zj5feUe6uXnTR2AFv5nygLcTzdxN+TU/6lc
 OmZv2zzdsAscYlhuUdI/4t4cXIjHAZI39+UBoNRuMqKbkbvXCFscZANLxvJjHjZv
 FFbgUk0DXkF0BCEDuSLNavidAv4b3gZsOmHbPfwuB8xdP05LbvbS2mf+2tWVAi2z
 ULfua/0o9yiwl19jSS6iQEPCvvLBeBzTLW7x5Rcm/S0JnotzB59yMaeqD7jO8JYP
 5PvI4WM/l5UfVHnZp2k1R76AOjReALw8dQgqAsT79Q7+EH3sNNuIjU6omdy+DFf4
 tnpwYfeLOaZ1SztNNfU87Hsgnn2CGw==
 =pDE3
 -----END PGP SIGNATURE-----

Merge tag 'efi-next' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/core

Pull EFI updates for v5.7 from Ard Biesheuvel:

This time, the set of changes for the EFI subsystem is much larger than
usual. The main reasons are:

 - Get things cleaned up before EFI support for RISC-V arrives, which will
   increase the size of the validation matrix, and therefore the threshold to
   making drastic changes,

 - After years of defunct maintainership, the GRUB project has finally started
   to consider changes from the distros regarding UEFI boot, some of which are
   highly specific to the way x86 does UEFI secure boot and measured boot,
   based on knowledge of both shim internals and the layout of bootparams and
   the x86 setup header. Having this maintenance burden on other architectures
   (which don't need shim in the first place) is hard to justify, so instead,
   we are introducing a generic Linux/UEFI boot protocol.

Summary of changes:

 - Boot time GDT handling changes (Arvind)

 - Simplify handling of EFI properties table on arm64

 - Generic EFI stub cleanups, to improve command line handling, file I/O,
   memory allocation, etc.

 - Introduce a generic initrd loading method based on calling back into
   the firmware, instead of relying on the x86 EFI handover protocol or
   device tree.

 - Introduce a mixed mode boot method that does not rely on the x86 EFI
   handover protocol either, and could potentially be adopted by other
   architectures (if another one ever surfaces where one execution mode
   is a superset of another)

 - Clean up the contents of struct efi, and move out everything that
   doesn't need to be stored there.

 - Incorporate support for UEFI spec v2.8A changes that permit firmware
   implementations to return EFI_UNSUPPORTED from UEFI runtime services at
   OS runtime, and expose a mask of which ones are supported or unsupported
   via a configuration table.

 - Various documentation updates and minor code cleanups (Heinrich)

 - Partial fix for the lack of by-VA cache maintenance in the decompressor
   on 32-bit ARM. Note that these patches were deliberately put at the
   beginning so they can be used as a stable branch that will be shared with
   a PR containing the complete fix, which I will send to the ARM tree.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-02-26 15:21:22 +01:00
Linus Walleij
c7896490dd leds: ns2: Absorb platform data
Nothing in the kernel includes the external header
<linux/platform_data/leds-kirkwood-ns2.h> so just push the
contents into the ns2 leds driver. If someone wants to use
platform data or board files to describe this device they
should be able to do so using GPIO machine descriptors but
in any case device tree should be the way forward for these
systems in all cases I can think of, and the driver already
supports that.

Cc: Simon Guinot <simon.guinot@sequanux.org>
Cc: Vincent Donnefort <vdonnefort@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-02-26 14:34:35 +01:00
Pablo Neira Ayuso
9ea4894ba4 Merge branch 'master' of git://blackhole.kfki.hu/nf
Jozsef Kadlecsik says:

====================
ipset patches for nf

The first one is larger than usual, but the issue could not be solved simpler.
Also, it's a resend of the patch I submitted a few days ago, with a one line
fix on top of that: the size of the comment extensions was not taken into
account at reporting the full size of the set.

- Fix "INFO: rcu detected stall in hash_xxx" reports of syzbot
  by introducing region locking and using workqueue instead of timer based
  gc of timed out entries in hash types of sets in ipset.
- Fix the forceadd evaluation path - the bug was also uncovered by the syzbot.
====================

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-02-26 13:55:15 +01:00
Laurent Pinchart
5e20bdf3d3 drm: Add helper to create a connector for a chain of bridges
Most bridge drivers create a DRM connector to model the connector at the
output of the bridge. This model is historical and has worked pretty
well so far, but causes several issues:

- It prevents supporting more complex display pipelines where DRM
connector operations are split over multiple components. For instance a
pipeline with a bridge connected to the DDC signals to read EDID data,
and another one connected to the HPD signal to detect connection and
disconnection, will not be possible to support through this model.

- It requires every bridge driver to implement similar connector
handling code, resulting in code duplication.

- It assumes that a bridge will either be wired to a connector or to
another bridge, but doesn't support bridges that can be used in both
positions very well (although there is some ad-hoc support for this in
the analogix_dp bridge driver).

In order to solve these issues, ownership of the connector needs to be
moved to the display controller driver.

To avoid code duplication in display controller drivers, add a new
helper to create and manage a DRM connector backed by a chain of
bridges. All connector operations are delegating to the appropriate
bridge in the chain.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-21-laurent.pinchart@ideasonboard.com
2020-02-26 13:31:41 +02:00
Laurent Pinchart
a25b988ff8 drm/bridge: Extend bridge API to disable connector creation
Most bridge drivers create a DRM connector to model the connector at the
output of the bridge. This model is historical and has worked pretty
well so far, but causes several issues:

- It prevents supporting more complex display pipelines where DRM
connector operations are split over multiple components. For instance a
pipeline with a bridge connected to the DDC signals to read EDID data,
and another one connected to the HPD signal to detect connection and
disconnection, will not be possible to support through this model.

- It requires every bridge driver to implement similar connector
handling code, resulting in code duplication.

- It assumes that a bridge will either be wired to a connector or to
another bridge, but doesn't support bridges that can be used in both
positions very well (although there is some ad-hoc support for this in
the analogix_dp bridge driver).

In order to solve these issues, ownership of the connector should be
moved to the display controller driver (where it can be implemented
using helpers provided by the core).

Extend the bridge API to allow disabling connector creation in bridge
drivers as a first step towards the new model. The new flags argument to
the bridge .attach() operation allows instructing the bridge driver to
skip creating a connector. Unconditionally set the new flags argument to
0 for now to keep the existing behaviour, and modify all existing bridge
drivers to return an error when connector creation is not requested as
they don't support this feature yet.

The change is based on the following semantic patch, with manual review
and edits.

@ rule1 @
identifier funcs;
identifier fn;
@@
 struct drm_bridge_funcs funcs = {
 	...,
 	.attach = fn
 };

@ depends on rule1 @
identifier rule1.fn;
identifier bridge;
statement S, S1;
@@
 int fn(
 	struct drm_bridge *bridge
+	, enum drm_bridge_attach_flags flags
 )
 {
 	... when != S
+	if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) {
+		DRM_ERROR("Fix bridge driver to make connector optional!");
+		return -EINVAL;
+	}
+
 	S1
 	...
 }

@ depends on rule1 @
identifier rule1.fn;
identifier bridge, flags;
expression E1, E2, E3;
@@
 int fn(
 	struct drm_bridge *bridge,
 	enum drm_bridge_attach_flags flags
 ) {
 <...
 drm_bridge_attach(E1, E2, E3
+	, flags
 )
 ...>
 }

@@
expression E1, E2, E3;
@@
 drm_bridge_attach(E1, E2, E3
+	, 0
 )

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-10-laurent.pinchart@ideasonboard.com
2020-02-26 13:31:23 +02:00
Laurent Pinchart
64d05ff758 drm/bridge: Add interlace_allowed flag to drm_bridge
In preparation for a connector creation helper based on a chain of
bridges, add a flag to the drm_bridge structure to report support for
interlaced modes. This will be used to set the connector's
interlace_allowed flag.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-9-laurent.pinchart@ideasonboard.com
2020-02-26 13:31:23 +02:00
Laurent Pinchart
11f6c4b1b2 drm/bridge: Add connector-related bridge operations and data
To support implementation of DRM connectors on top of DRM bridges
instead of by bridges, the drm_bridge needs to expose new operations and
data:

- Output detection, hot-plug notification, mode retrieval and EDID
  retrieval operations
- Bitmask of supported operations
- Bridge output type
- I2C adapter for DDC access

Add and document these.

Three new bridge helper functions are also added to handle hot plug
notification in a way that is as transparent as possible for the
bridges.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-8-laurent.pinchart@ideasonboard.com
2020-02-26 13:31:22 +02:00
Laurent Pinchart
282f713c65 drm/bridge: Fix atomic state ops documentation
The drm_bridge_funcs atomic_state_duplicate and atomic_state_destroy
operations are erroneously documented as having a default implementation
if not implemented in bridge drivers. This isn't correct, fix the
documentation.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-6-laurent.pinchart@ideasonboard.com
2020-02-26 13:31:20 +02:00
Laurent Pinchart
be39f3db01 drm/bridge: Document the drm_encoder.bridge_chain field as private
The drm_encoder.bridge_chain is not meant to be touched manually by
drivers. Make this clear in the documentation.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-5-laurent.pinchart@ideasonboard.com
2020-02-26 13:31:20 +02:00
Laurent Pinchart
a92d083d08 drm/edid: Add flag to drm_display_info to identify HDMI sinks
The drm_display_info structure contains many fields related to HDMI
sinks, but none that identifies if a sink compliant with CEA-861 (EDID)
shall be treated as an HDMI sink or a DVI sink. Add such a flag, and
populate it according to section 8.3.3 ("DVI/HDMI Device
Discrimination") of the HDMI v1.3 specification.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-4-laurent.pinchart@ideasonboard.com
2020-02-26 13:31:19 +02:00
Laurent Pinchart
b35f90f2d4 drm/connector: Add helper to get a connector type name
drm_connector.c contains a map of connector types (DRM_MODE_CONNECTOR_*)
to name strings, but doesn't expose it. This leads to drivers having to
store a similar map.

Add a new drm_get_connector_type_name() helper function that return a
name string for a connector type.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-3-laurent.pinchart@ideasonboard.com
2020-02-26 13:31:18 +02:00
Laurent Pinchart
5ee0caf161 video: hdmi: Change return type of hdmi_avi_infoframe_init() to void
The hdmi_avi_infoframe_init() never needs to return an error, change its
return type to void.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-2-laurent.pinchart@ideasonboard.com
2020-02-26 13:31:18 +02:00
Vinod Koul
ed29a0a672 Merge branch 'topic/asoc' into next 2020-02-26 14:18:34 +05:30
Pierre-Louis Bossart
2c6cff682d soundwire: add helper macros for devID fields
Move bit extractors to macros, so that the definitions can be used by
other drivers parsing the MIPI definitions extracted from firmware
tables (ACPI or DT).

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200225170041.23644-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-26 14:18:25 +05:30
Chris Wilson
88be76cdaf drm/i915: Allow userspace to specify ringsize on construction
No good reason why we must always use a static ringsize, so let
userspace select one during construction.

Link: https://github.com/intel/compute-runtime/pull/261
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Steve Carbonari <steven.carbonari@intel.com>
Reviewed-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200225192206.1107336-2-chris@chris-wilson.co.uk
2020-02-25 19:23:19 +00:00
Jiri Pirko
5a2e106c74 devlink: extend devlink_trap_report() to accept cookie and pass
Add cookie argument to devlink_trap_report() allowing driver to pass in
the user cookie. Pass on the cookie down to drop monitor code.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-25 11:05:54 -08:00