This .dtsi file is not included anywhere in the tree and can't be
tested.
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260122202345.3387936-2-robh@kernel.org
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Check 'ndigits' before allocating 'struct ecc_point' to return early if
needed. Inline the code from and remove ecc_alloc_digits_space() and
ecc_free_digits_space(), respectively.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Airoha uses RAW mode to collect noise from the TRNG. These appear to
be unprocessed oscillations from the tero loop. For this reason, they
do not have a perfect distribution and entropy. Simple noise compression
reduces its size by 9%, so setting the quality to 900 seems reasonable.
The same value is used by the downstream driver.
Compare the size before and after compression:
$ ls -l random_airoha*
-rw-r--r-- 1 aleksander aleksander 76546048 Jan 3 23:43 random_airoha
-rw-rw-r-- 1 aleksander aleksander 69783562 Jan 5 20:23 random_airoha.zip
FIPS test results:
$ cat random_airoha | rngtest -c 10000
rngtest 2.6
Copyright (c) 2004 by Henrique de Moraes Holschuh
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
rngtest: starting FIPS tests...
rngtest: bits received from input: 200000032
rngtest: FIPS 140-2 successes: 0
rngtest: FIPS 140-2 failures: 10000
rngtest: FIPS 140-2(2001-10-10) Monobit: 9957
rngtest: FIPS 140-2(2001-10-10) Poker: 10000
rngtest: FIPS 140-2(2001-10-10) Runs: 10000
rngtest: FIPS 140-2(2001-10-10) Long run: 4249
rngtest: FIPS 140-2(2001-10-10) Continuous run: 0
rngtest: input channel speed: (min=953.674; avg=27698.935; max=19073.486)Mibits/s
rngtest: FIPS tests speed: (min=59.791; avg=298.028; max=328.853)Mibits/s
rngtest: Program run time: 647638 microseconds
In general, these data look like real noise, but with lower entropy
than expected.
Fixes: e53ca8efcc ("hwrng: airoha - add support for Airoha EN7581 TRNG")
Suggested-by: Benjamin Larsson <benjamin.larsson@genexis.eu>
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
snp_range_list is only used in __sev_snp_init_locked() in the SNP_INIT_EX
case, move the declaration there and add a __free() cleanup helper for it
instead of waiting until shutdown.
Fixes: 1ca5614b84 ("crypto: ccp: Add support to initialize the AMD-SP for SEV-SNP")
Reviewed-by: Alexey Kardashevskiy <aik@amd.com>
Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If page reclaim fails in sev_ioctl_do_snp_platform_status() and SNP was
moved from UNINIT to INIT for the function, SNP is not moved back to
UNINIT state. Additionally, SNP is not required to be initialized in order
to execute the SNP_PLATFORM_STATUS command, so don't attempt to move to
INIT state and let SNP_PLATFORM_STATUS report the status as is.
Fixes: ceac7fb89e ("crypto: ccp - Ensure implicit SEV/SNP init and shutdown in ioctls")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Tycho Andersen (AMD) <tycho@kernel.org>
Reviewed-by: Alexey Kardashevskiy <aik@amd.com>
Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use scoped for-each loop when iterating over device nodes to make code a
bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The remaining combinations of AES-CTR-RFC3686 and SHA* have already been
marked as allowed in 8888690ef5. This commit does the same for SHA224.
rfc3686(ctr(aes)) is already marked fips compliant,
so these should be fine.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
During driver detach, the same hash algorithm is unregistered multiple
times due to a wrong iterator.
Fixes: 9739f5f93b ("crypto: eip93 - Add Inside Secure SafeXcel EIP-93 crypto engine support")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use NULL instead of 0 as the null pointer.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Alexey Kardashevskiy <aik@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
These structs are never modified.
To prevent malicious or accidental modifications due to bugs,
mark them as const.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the __maybe_unused attribute to the function definitions and remove
the now-unnecessary forward declarations.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fold both assignments into a single max() call to simplify the code.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Return type of crypto_tfm_ctx() is void *. Remove explicit type cast.
Signed-off-by: Harsh Jain <h.jain@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace zynqmp with xilinx to have more generic name.
Signed-off-by: Harsh Jain <h.jain@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Don't enqueue requests which are supposed to fallback to s/w crypto.
Signed-off-by: Harsh Jain <h.jain@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Encrypt requests can be handled by driver when authsize is less than 16.
Signed-off-by: Harsh Jain <h.jain@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert FW error code to linux error code and remove dmesg error print for
authentication tag mismatch failure.
Signed-off-by: Harsh Jain <h.jain@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
zynqmp-aes-gcm updated to self discover, corresponding dt binding
can be mark deprecated.
Signed-off-by: Harsh Jain <h.jain@amd.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
"alg" in zynqmp_aead_drv_ctx is single field union variable.
Remove unnecessary alg union from structure.
Signed-off-by: Harsh Jain <h.jain@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For better maintainability move crypto related API's to
new zynqmp-crypto.c file.
Signed-off-by: Harsh Jain <h.jain@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace the for loops with calls to unregister_aeads(),
unregister_ahashes(), and unregister_skciphers(), respectively. Return
'ret' immediately and remove the goto statements to simplify the error
handling code. No functional changes.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace the for loop with a call to crypto_unregister_lskciphers().
Return 'ret' immediately and remove the goto statement to simplify the
error handling code. No functional changes.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace the for loop with a call to crypto_unregister_skciphers().
Return 'ret' immediately and remove the goto statement to simplify the
error handling code. No functional changes.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace the for loop with a call to crypto_unregister_shashes(). Return
'ret' immediately and remove the goto statement to simplify the error
handling code. No functional changes.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace the for loop with a call to crypto_unregister_ahashes(). Return
'ret' immediately and remove the goto statement to simplify the error
handling code. No functional changes.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace the for loop with a call to crypto_unregister_acomps(). Return
'ret' immediately and remove the goto statement to simplify the error
handling code. No functional changes.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In esw_acl_ingress_lgcy_setup(), if esw_acl_table_create() fails,
the function returns directly without releasing the previously
created counter, leading to a memory leak.
Fix this by jumping to the out label instead of returning directly,
which aligns with the error handling logic of other paths in this
function.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: 07bab95026 ("net/mlx5: E-Switch, Refactor eswitch ingress acl codes")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260120134640.2717808-1-zilin@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commit bdce162f2e ("riscv: Use 64-bit variable for output in
__get_user_asm"), there is a warning when building for 32-bit RISC-V:
In file included from include/linux/uaccess.h:13,
from include/linux/sched/task.h:13,
from include/linux/sched/signal.h:9,
from include/linux/rcuwait.h:6,
from include/linux/mm.h:36,
from include/linux/migrate.h:5,
from mm/migrate.c:16:
mm/migrate.c: In function 'do_pages_move':
arch/riscv/include/asm/uaccess.h:115:15: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
115 | (x) = (__typeof__(x))__tmp; \
| ^
arch/riscv/include/asm/uaccess.h:198:17: note: in expansion of macro '__get_user_asm'
198 | __get_user_asm("lb", (x), __gu_ptr, label); \
| ^~~~~~~~~~~~~~
arch/riscv/include/asm/uaccess.h:218:9: note: in expansion of macro '__get_user_nocheck'
218 | __get_user_nocheck(x, ptr, __gu_failed); \
| ^~~~~~~~~~~~~~~~~~
arch/riscv/include/asm/uaccess.h:255:9: note: in expansion of macro '__get_user_error'
255 | __get_user_error(__gu_val, __gu_ptr, __gu_err); \
| ^~~~~~~~~~~~~~~~
arch/riscv/include/asm/uaccess.h:285:17: note: in expansion of macro '__get_user'
285 | __get_user((x), __p) : \
| ^~~~~~~~~~
mm/migrate.c:2358:29: note: in expansion of macro 'get_user'
2358 | if (get_user(p, pages + i))
| ^~~~~~~~
Add an intermediate cast to 'unsigned long', which is guaranteed to be the same
width as a pointer, before the cast to the type of the output variable to clear
up the warning.
Fixes: bdce162f2e ("riscv: Use 64-bit variable for output in __get_user_asm")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202601210526.OT45dlOZ-lkp@intel.com/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20260121-riscv-fix-int-to-pointer-cast-v1-1-b83eebe57c76@kernel.org
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Enable flexible thread-to-queue mapping in batch I/O mode to support
arbitrary combinations of threads and queues, improving resource
utilization and scalability.
Key improvements:
- Support N:M thread-to-queue mapping (previously limited to 1:1)
- Dynamic buffer allocation based on actual queue assignment per thread
- Thread-safe queue preparation with spinlock protection
- Intelligent buffer index calculation for multi-queue scenarios
- Enhanced validation for thread/queue combination constraints
Implementation details:
- Add q_thread_map matrix to track queue-to-thread assignments
- Dynamic allocation of commit and fetch buffers per thread
- Round-robin queue assignment algorithm for load balancing
- Per-queue spinlock to prevent race conditions during prep
- Updated buffer index calculation using queue position within thread
This enables efficient configurations like:
- Any other N:M combinations for optimal resource matching
Testing:
- Added test_batch_02.sh: 4 threads vs 1 queue
- Added test_batch_03.sh: 1 thread vs 4 queues
- Validates correctness across different mapping scenarios
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add --batch/-b for enabling F_BATCH_IO.
Add batch_01 for covering its basic function.
Add stress_08 and stress_09 for covering stress test.
Add recovery test for F_BATCH_IO in generic_04 and generic_05.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
More tests need to be covered in existing generic tests, and default
45sec isn't enough, and timeout is often triggered, increase timeout
by adding setting file.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add support for UBLK_U_IO_FETCH_IO_CMDS to enable efficient batch
fetching of I/O commands using multishot io_uring operations.
Key improvements:
- Implement multishot UBLK_U_IO_FETCH_IO_CMDS for continuous command fetching
- Add fetch buffer management with page-aligned, mlocked buffers
- Process fetched I/O command tags from kernel-provided buffers
- Integrate fetch operations with existing batch I/O infrastructure
- Significantly reduce uring_cmd issuing overhead through batching
The implementation uses two fetch buffers per thread with automatic
requeuing to maintain continuous I/O command flow. Each fetch operation
retrieves multiple command tags in a single syscall, dramatically
improving performance compared to individual command fetching.
Technical details:
- Fetch buffers are page-aligned and mlocked for optimal performance
- Uses IORING_URING_CMD_MULTISHOT for continuous operation
- Automatic buffer management and requeuing on completion
- Enhanced CQE handling for fetch command completions
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Implement UBLK_U_IO_COMMIT_IO_CMDS to enable efficient batched
completion of I/O operations in the batch I/O framework.
This completes the batch I/O infrastructure by adding the commit
phase that notifies the kernel about completed I/O operations:
Key features:
- Batch multiple I/O completions into single UBLK_U_IO_COMMIT_IO_CMDS
- Dynamic commit buffer allocation and management per thread
- Automatic commit buffer preparation before processing events
- Commit buffer submission after processing completed I/Os
- Integration with existing completion workflows
Implementation details:
- ublk_batch_prep_commit() allocates and initializes commit buffers
- ublk_batch_complete_io() adds completed I/Os to current batch
- ublk_batch_commit_io_cmds() submits batched completions to kernel
- Modified ublk_process_io() to handle batch commit lifecycle
- Enhanced ublk_complete_io() to route to batch or legacy completion
The commit buffer stores completion information (tag, result, buffer
details) for multiple I/Os, then submits them all at once, significantly
reducing syscall overhead compared to individual I/O completions.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Implement support for UBLK_U_IO_PREP_IO_CMDS in the batch I/O framework:
- Add batch command initialization and setup functions
- Implement prep command queueing with proper buffer management
- Add command completion handling for prep and commit commands
- Integrate batch I/O setup into thread initialization
- Update CQE handling to support batch commands
The implementation uses the previously established buffer management
infrastructure to queue UBLK_U_IO_PREP_IO_CMDS commands. Commands are
prepared in the first thread context and use commit buffers for
efficient command batching.
Key changes:
- ublk_batch_queue_prep_io_cmds() prepares I/O command batches
- ublk_batch_compl_cmd() handles batch command completions
- Modified thread setup to use batch operations when enabled
- Enhanced buffer index calculation for batch mode
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add the foundational infrastructure for UBLK_F_BATCH_IO buffer
management including:
- Allocator utility functions for small sized per-thread allocation
- Batch buffer allocation and deallocation functions
- Buffer index management for commit buffers
- Thread state management for batch I/O mode
- Buffer size calculation based on device features
This prepares the groundwork for handling batch I/O commands by
establishing the buffer management layer needed for UBLK_U_IO_PREP_IO_CMDS
and UBLK_U_IO_COMMIT_IO_CMDS operations.
The allocator uses CPU sets for efficient per-thread buffer tracking,
and commit buffers are pre-allocated with 2 buffers per thread to handle
overlapping command operations.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since UBLK_F_PER_IO_DAEMON is added, io buffer index may depend on current
thread because the common way is to use per-pthread io_ring_ctx for issuing
ublk uring_cmd.
Add one helper for returning io buffer index, so we can hide the buffer
index implementation details for target code.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace assert() with ublk_assert() since it is often triggered in daemon,
and we may get nothing shown in terminal.
Add ublk_assert(), so we can log something to syslog when assert() is
triggered.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The build_user_data() function packs multiple fields into a __u64
value using bit shifts. Without explicit __u64 casts before shifting,
the shift operations are performed on 32-bit unsigned integers before
being promoted to 64-bit, causing data loss.
Specifically, when tgt_data >= 256, the expression (tgt_data << 24)
shifts on a 32-bit value, truncating the upper 8 bits before promotion
to __u64. Since tgt_data can be up to 16 bits (assertion allows up to
65535), values >= 256 would have their high byte lost.
Add explicit __u64 casts to both op and tgt_data before shifting to
ensure the shift operations happen in 64-bit space, preserving all
bits of the input values.
user_data_to_tgt_data() is only used by stripe.c, in which the max
supported member disks are 4, so won't trigger this issue.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
During recovery with batch I/O, UBLK_U_IO_FETCH_IO_CMDS command fails with
-ENODEV because ublk_batch_attach() rejects them when ubq->canceling is set.
The canceling flag remains set until all queues are ready.
Fix this by tracking per-queue readiness and clearing ubq->canceling as
soon as each individual queue becomes ready, rather than waiting for all
queues. This allows subsequent UBLK_U_IO_FETCH_IO_CMDS commands to succeed
during recovery.
Changes:
- Add ubq->nr_io_ready to track I/Os ready per queue
- Add ub->nr_queue_ready to track number of ready queues
- Add ublk_queue_ready() helper to check queue readiness
- Redefine ublk_dev_ready() based on queue count instead of I/O count
- Clear ubq->canceling immediately when queue becomes ready
- Add ublk_queue_reset_io_flags() to reset per-queue flags
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Reduce overhead when completing multiple requests in batch I/O mode by
accumulating them in an io_comp_batch structure and completing them
together via blk_mq_end_request_batch(). This minimizes per-request
completion overhead and improves performance for high IOPS workloads.
The implementation adds an io_comp_batch pointer to struct ublk_io and
initializes it in __ublk_fetch(). For batch I/O, the pointer is set to
the batch structure in ublk_batch_commit_io(). The __ublk_complete_rq()
function uses io->iob to call blk_mq_add_to_batch() for batch mode.
After processing all batch I/Os, the completion callback is invoked in
ublk_handle_batch_commit_cmd() to complete all accumulated requests
efficiently.
So far just covers direct completion. For deferred completion(zero copy,
auto buffer reg), ublk_io_release() is often delayed in freeing buffer
consumer io_uring request's code path, so this patch often doesn't work,
also it is hard to pass the per-task 'struct io_comp_batch' for deferred
completion.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
