The interrupt controller found on RZ/G3E doesn't provide any facility to
configure the wakeup sources. That's the reason why the driver lacks the
irq_set_wake() callback for the interrupt chip.
But this prevent to properly enter power management states like "suspend to
idle".
Enable the flags IRQCHIP_SKIP_SET_WAKE and IRQCHIP_MASK_ON_SUSPEND so the
interrupt suspend logic can handle the chip correctly.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/all/20250701105923.52151-1-biju.das.jz@bp.renesas.com
According to Bspec, bits 0~9 of MI_STORE_DATA_IMM must not exceed 0x3FE.
The macro MI_SDI_NUM_QW(x) evaluates to 2 * x + 1, which means the
condition 2 * x + 1 <= 0x3FE must be satisfied. Therefore, the maximum
valid value for x is 0x1FE, not 0x1FF.
v2
- Replace 0x1fe with macro MAX_PTE_PER_SDI (Auld, Matthew & Patelczyk, Maciej)
v3
- Change macro MAX_PTE_PER_SDI from 0x1fe to 0x1feU (De Marchi, Lucas)
Bspec: 60246
Fixes: 9c44fd5f6e ("drm/xe: Add migrate layer functions for SVM support")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Brian3 Nguyen <brian3.nguyen@intel.com>
Cc: Alex Zuo <alex.zuo@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Maciej Patelczyk <maciej.patelczyk@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Suggested-by: Shuicheng Lin <shuicheng.lin@intel.com>
Signed-off-by: Jia Yao <jia.yao@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
Link: https://lore.kernel.org/r/20250612224620.161105-1-jia.yao@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit c038bdba98)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Describe in one sentence what the function does.
Do not repeat example situations when the returned number is lower than
the number of segments on input.
Signed-off-by: Petr Tesarik <ptesarik@suse.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250627101015.1600042-9-ptesarik@suse.com
Add an introductory paragraph to Part Id - Streaming DMA mappings and move
the explanation of address constraints there, because it applies to all map
functions.
Clarify that streaming DMA can be used with memory which does not meet the
addressing constraints of a device, but it may fail in that case.
Make a note about SWIOTLB and link to the detailed description of it.
Do not mention platform-dependent allocation flags. The note may mislead
device driver authors into thinking that they should poke into and try to
second-guess the DMA API implementation. They definitely shouldn't.
Remove the claim that platforms with an IOMMU may not require physically
contiguous buffers. The current implementation explicitly rejects vmalloc
addresses, regardless of IOMMU.
Signed-off-by: Petr Tesarik <ptesarik@suse.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250627101015.1600042-8-ptesarik@suse.com
Move the description of DMA mask from the documentation of dma_map_single()
to Part Ic - DMA addressing limitations and improve the wording.
Explain when a mask setting function may fail, and do not repeat this
explanation for each individual function.
Clarify which device parameters are updated by each mask setting function.
Signed-off-by: Petr Tesarik <ptesarik@suse.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250627101015.1600042-7-ptesarik@suse.com
Move the DMA pool API documentation from Memory Management APIs to
dma-api.rst, replacing the outdated duplicate description there.
Signed-off-by: Petr Tesarik <ptesarik@suse.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250627101015.1600042-6-ptesarik@suse.com
Document the dma_pool_zalloc() wrapper.
Signed-off-by: Petr Tesarik <ptesarik@suse.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
[jc: fixed up dma_pool_alloc() reference in dmapool.h]
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250627101015.1600042-5-ptesarik@suse.com
Building with make allyesconfig on musl results in the following
In file included from samples/landlock/sandboxer.c:22:
/usr/include/sys/prctl.h:88:8: error: redefinition of 'struct prctl_mm_map'
88 | struct prctl_mm_map {
| ^~~~~~~~~~~~
In file included from samples/landlock/sandboxer.c:16:
usr/include/linux/prctl.h:134:8: note: originally defined here
134 | struct prctl_mm_map {
| ^~~~~~~~~~~~
This is mainly due to difference in the sys/prctl.h between glibc and
musl. The struct prctl_mm_map is defined in sys/prctl.h in musl.
Signed-off-by: Brahmajit Das <listout@listout.xyz>
[mic: Move down the if/include/endif block]
Link: https://lore.kernel.org/r/20250630203248.16273-1-listout@listout.xyz
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Enable previously disabled dynptr/test_probe_read_user_str_dynptr test,
after the fix it depended on was merged into bpf-next.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20250630133515.1108325-1-mykyta.yatsenko5@gmail.com
This patch is a follow up to commit 1cb0f56d96 ("bpf: WARN_ONCE on
verifier bugs"). It generalizes the use of verifier_error throughout
the verifier, in particular for logs previously marked "verifier
internal error". As a consequence, all of those verifier bugs will now
come with a kernel warning (under CONFIG_DBEUG_KERNEL) detectable by
fuzzers.
While at it, some error messages that were too generic (ex., "bpf
verifier is misconfigured") have been reworded.
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/aGQqnzMyeagzgkCK@Tunnel
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ilya Leoshkevich says:
====================
s390/bpf: Describe the frame using a struct instead of constants
Hi,
This series contains two small refactorings without functional changes.
The first one removes the code duplication around calculating the
distance from %r15 to the stack frame.
The second one simplifies how offsets to various values stored inside
the frame are calculated.
Best regards,
Ilya
====================
Link: https://patch.msgid.link/20250624121501.50536-1-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently the caller-allocated portion of the stack frame is described
using constants, hardcoded values, and an ASCII drawing, making it
harder than necessary to ensure that everything is in sync.
Declare a struct and use offsetof() and offsetofend() macros to refer
to various values stored within the frame.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20250624121501.50536-3-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The calculation of the distance from %r15 to the caller-allocated
portion of the stack frame is copy-pasted into multiple places in the
JIT code.
Move it to bpf_jit_prog() and save the result into bpf_jit::frame_off,
so that the other parts of the JIT can use it.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20250624121501.50536-2-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The wording sometimes suggests there are multiple functions for an
operation. This was in fact the case before PCI DMA API was removed, but
since there is only one API now, the documentation has become confusing.
To improve readability:
* Remove implicit references to the PCI DMA API (plurals, use of "both",
etc.)
* Where possible, refer to an actual function rather than a more generic
description of the operation.
Signed-off-by: Petr Tesarik <ptesarik@suse.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250627101015.1600042-4-ptesarik@suse.com
For consistency, always use the term "coherent" when talking about memory
that is not subject to CPU caching effects. The term "consistent" is a
relic of a long-removed PCI DMA API (pci_alloc_consistent() and
pci_free_consistent() functions).
Signed-off-by: Petr Tesarik <ptesarik@suse.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250627101015.1600042-3-ptesarik@suse.com
Make sure that all occurrences are spelled "DMA API" (all uppercase, no
hyphen, no underscore).
Signed-off-by: Petr Tesarik <ptesarik@suse.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250627101015.1600042-2-ptesarik@suse.com
The KernelVersion field has limited practical value. Git history
provides more accurate tracking of when features were introduced
and target kernel versions often change during development and
merge.
Label it optional.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250626024101.792073-1-alison.schofield@intel.com
The HTML output seems to be correct, but when reading the raw rst file
it's annoying.
So use "|" for table the border.
Signed-off-by: Richard Weinberger <richard@nod.at>
Acked-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250628083205.1066472-1-richard@nod.at
Now that "inline_*" are just ordinary parser states, split them into two
separate functions, getting rid of some nested conditional logic.
The original process_inline() would simply ignore lines that didn't match
any of the regexes (those lacking the initial " * " marker). I have
preserved that behavior, but we should perhaps emit a warning instead.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250627184000.132291-9-corbet@lwn.net
The processing of inline kerneldoc comments is a state like the rest, but
it was implemented as a set of separate substates. Just remove the
substate logic and make the inline states normal ones like the rest.
INLINE_ERROR was never actually used for anything, so just take it out.
No changes to the generated output.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250627184000.132291-8-corbet@lwn.net
Reorganize process_export() to eliminate duplicated code, don't look for
exports in states where we don't expect them, and don't bother with normal
state-machine processing if an export declaration has been found.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250627184000.132291-6-corbet@lwn.net
The type_param regex matches "@..." just fine, so the special-case branch
for that in dump_section() is never executed. Just remove it.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250627184000.132291-4-corbet@lwn.net
Rather than having other code mucking around with this bit of internal
state, encapsulate it internally. Accumulate the description as a list of
strings, joining them at the end, which is a more efficient way of building
the text.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250627184000.132291-3-corbet@lwn.net
This driver is compatible with the FocalTech FT8716 touchscreen, which
supports up to 10 concurrent touch points. Add a compatible for it.
Signed-off-by: Jens Reidel <adrian@mainlining.org>
Link: https://lore.kernel.org/r/20250313202017.19621-3-adrian@mainlining.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The I2C core now provides a debugfs entry for each client. Let this
driver use it instead of the custom directory in debugfs root. Further
improvements by this change: support of multiple instances.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250318091904.22468-1-wsa+renesas@sang-engineering.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
destroy_workqueue() already drains the queue before destroying it, so
there is no need to flush it explicitly.
Remove the redundant 'flush_workqueue()' calls.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://lore.kernel.org/r/20250312072940.1429931-1-nichen@iscas.ac.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Convert tsc2007.txt to yaml format.
Additional changes:
- add pendown-gpio property to match existed dts.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250529193241.793678-1-Frank.Li@nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add a few build variables to make it easier for distributions to
package the bindings. Allow current variables to be overwritten by
environment variables that are passed to make.
CCing Thorsten Leemhuis <linux@leemhuis.info>.
https://lore.kernel.org/r/20250624204105.457971-1-jwyatt@redhat.com
Signed-off-by: John B. Wyatt IV <jwyatt@redhat.com>
Signed-off-by: John B. Wyatt IV <sageofredondo@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Introducing support for smbus re-broke i2cdetect, causing it to detect
devices at every i2c address, just as it did prior to being fixed in
commit 49e1f0fd0d ("i2c: microchip-core: fix "ghost" detections").
This was caused by an oversight, where the new smbus code failed to
check the return value of mchp_corei2c_xfer(). Check it, and propagate
any errors.
Fixes: d6ceb40538 ("i2c: microchip-corei2c: add smbus support")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250630-shopper-proven-500f4075e7d6@spud
The calculation of the upper limit for queues does not depend solely on
the number of possible CPUs; for example, the isolcpus kernel
command-line option must also be considered.
To account for this, the block layer provides a helper function to
retrieve the maximum number of queues. Use it to set an appropriate
upper queue number limit.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20250617-isolcpus-queue-counters-v1-5-13923686b54b@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The calculation of the upper limit for queues does not depend solely on
the number of online CPUs; for example, the isolcpus kernel
command-line option must also be considered.
To account for this, the block layer provides a helper function to
retrieve the maximum number of queues. Use it to set an appropriate
upper queue number limit.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20250617-isolcpus-queue-counters-v1-4-13923686b54b@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The calculation of the upper limit for queues does not depend solely on
the number of possible CPUs; for example, the isolcpus kernel
command-line option must also be considered.
To account for this, the block layer provides a helper function to
retrieve the maximum number of queues. Use it to set an appropriate
upper queue number limit.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20250617-isolcpus-queue-counters-v1-3-13923686b54b@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add two variants of helper functions that calculate the correct number
of queues to use. Two variants are needed because some drivers base
their maximum number of queues on the possible CPU mask, while others
use the online CPU mask.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20250617-isolcpus-queue-counters-v1-2-13923686b54b@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
group_cpu_evenly() might have allocated less groups then requested:
group_cpu_evenly()
__group_cpus_evenly()
alloc_nodes_groups()
# allocated total groups may be less than numgrps when
# active total CPU number is less then numgrps
In this case, the caller will do an out of bound access because the
caller assumes the masks returned has numgrps.
Return the number of groups created so the caller can limit the access
range accordingly.
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250617-isolcpus-queue-counters-v1-1-13923686b54b@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When fewer pages are read, nr_pages may be smaller than nr_cpages. Due
to the nr_vecs limit, the compressed pages will be split into multiple
bios and then merged at the block level. In this case, nr_cpages should
be used to pre-allocate bvecs.
To handle this case, align max_nr_pages to cluster_size, which should be
enough for all compressed pages.
Signed-off-by: Jianan Huang <huangjianan@xiaomi.com>
Signed-off-by: Sheng Yong <shengyong1@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Let's return errors caught by the generic checks. This fixes generic/494 where
it expects to see EBUSY by setattr_prepare instead of EINVAL by f2fs for active
swapfile.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
After commit aefeb286b960 ("libnvdimm: Don't use "proxy" headers"),
range.h may not be implicitly included, resulting in a build error:
In file included from drivers/cxl/core/features.c:8:
drivers/cxl/cxl.h:365:22: error: field 'hpa_range' has incomplete type
365 | struct range hpa_range;
| ^~~~~~~~~
drivers/cxl/cxl.h:562:22: error: field 'hpa_range' has incomplete type
562 | struct range hpa_range;
| ^~~~~~~~~
drivers/cxl/cxl.h:570:22: error: field 'hpa_range' has incomplete type
570 | struct range hpa_range;
| ^~~~~~~~~
drivers/cxl/cxl.h:803:22: error: array type has incomplete element type 'struct range'
803 | struct range dvsec_range[2];
| ^~~~~~~~~~~
Include range.h in cxl.h explicitly to clear up the errors.
Fixes: aefeb286b960 ("libnvdimm: Don't use "proxy" headers")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20250701-cxl-fix-struct-range-error-v1-1-1f199bddc7c9@kernel.org
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Update header inclusions to follow IWYU (Include What You Use)
principle.
Note that kernel.h is discouraged to be included as it's written
at the top of that file.
While doing that, sort headers alphabetically.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250627142001.994860-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Attempt to consolidate the LRC offsets calculations by aligning the
recently added wa_bb_offset with the naming scheme in the file and
also change the size stored in struct xe_lrc to not include the ring
buffer.
The former makes it somewhat visually easier to follow the layout of the
various logical blocks stored in the LRC bo, while the latter reduces the
number of sprinkled around calculations.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250630124711.8209-2-tvrtko.ursulin@igalia.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
I226 devices advertise support for the PCI-E link L1.2 substate. However,
due to a hardware limitation, the exit latency from this low-power state
is longer than the packet buffer can tolerate under high traffic
conditions. This can lead to packet loss and degraded performance.
To mitigate this, disable the L1.2 substate. The increased power draw
between L1.1 and L1.2 is insignificant.
Fixes: 4354621173 ("igc: Add new device ID's")
Link: https://lore.kernel.org/intel-wired-lan/15248b4f-3271-42dd-8e35-02bfc92b25e1@intel.com
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Now that the driver core can properly handle constant struct bus_type,
move the cxl_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: linux-cxl@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2025070138-vigorous-negative-eae7@gregkh
Signed-off-by: Dave Jiang <dave.jiang@intel.com>