Partition nodes without a compatible have no restrictions on additional
properties. Fix this by ensuring 'unevaluatedProperties' is set when
there's no compatible property. If there is a compatible property, then
there should be a specific schema for it which will enforce
'unevaluatedProperties'.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The partitions.yaml schema is an unusual structure in that it includes
all possible partition types, and it disables the normal matching by
compatible strings. As partitions.yaml has nothing to match on, it is
only applied when explicitly referenced. The use of "oneOf" also results
in misleading warnings which are difficult to understand. Drop
partitions.yaml and rely on the standard compatible matching instead.
The "mmc-card" case previously allowed any partition type, but now only
allows "fixed-partitions". There aren't any users and the original
intent appeared to be only for "fixed-partitions".
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Whether "#address-cells" and "#size-cells" are used or not depends on
the specific partition type, so drop them from partitions.yaml and
define them in the specific partition schemas as needed.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
An "nvmem-layout" node can be used in any partition node, so add it.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Defining child node properties specific to the parent schema doesn't work
unless all the child node properties are known. They aren't known because
any partition can define its own properties. The solution to this is
typically something like spi-peripheral-props.yaml, but that's overkill for
this single property. Just move it to partition.yaml instead.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The "compression" property is defined in the wrong place as it applies
to individual partitions nodes, not all nodes.
Fixes: 8baba8d52f ("dt-bindings: mtd: fixed-partitions: Add compression property")
Reviewed-by: Simon Glass <simon.glass@canonical.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Some users of "brcm,nand-iproc" include "brcm,brcmnand" and some don't.
The "brcm,brcmnand" compatible is not useful for iProc systems as
there's a separate driver for iProc. So drop it as a fallback.
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
UBSAN reports shift-out-of-bounds in jedec_read_mfr() and jedec_read_id():
UBSAN: shift-out-of-bounds in drivers/mtd/chips/jedec_probe.c:1924:13
shift exponent 32 is too large for 32-bit type 'int'
UBSAN: shift-out-of-bounds in drivers/mtd/chips/jedec_probe.c:1940:12
shift exponent 32 is too large for 32-bit type 'int'
The JEDEC manufacturer/device ID masking uses:
(1 << (cfi->device_type * 8)) - 1
When cfi->device_type is 4, this evaluates to 1 << 32. Since the
literal '1' has type int, this is a 32-bit shift and is undefined behavior.
Fix it by using a 64-bit literal (1ULL) so the shift is performed in a 64-bit type.
Co-developed-by: Hui Peng <benquike@gmail.com>
Signed-off-by: Hui Peng <benquike@gmail.com>
Co-developed-by: Zhihao Yao (Zephyr) <zhihao.yao@njit.edu>
Signed-off-by: Zhihao Yao (Zephyr) <zhihao.yao@njit.edu>
Signed-off-by: Chenxi Hou <ch395@njit.edu>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Writing also the high speed timing registers unconditionally.
The reset value for these registers is 0, so this should
always be safe.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260120130729.1679560-5-heikki.krogerus@linux.intel.com
The DesignWare I2C can not be operated as I2C master and
I2C slave simultaneously, but that does not actually mean
master and slave modes can not be supported at the same
time. It just means an explicit mode swap needs to be
executed when the mode is changed. The DesignWare I2C
documentation actually describes a couple of cases where the
mode is excepted to be changed.
The I2C master will now always be supported. Both modes are
now always configured in i2c_dw_configure(), but the slave
mode will continue to be available only when the Kconfig
option I2C_SLAVE is enabled.
The driver will now start in master mode and then swap to
slave mode when a slave device is registered. After a slave
device is registered, the controller is swapped to master
mode when a transfer in master mode is started and then back
to slave mode again after the transfer is completed.
The DesignWare I2C can now be used with protocols such as
MCTP (drivers/net/mctp/mctp-i2c.c) and IPMI
(drivers/char/ipmi/) that require support for both I2C
master and I2C slave. It is now also possible to support the
SMBus Host Notification Protocol as I2C master if needed.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260120130729.1679560-4-heikki.krogerus@linux.intel.com
Providing a single function for controller initialisation.
The controller initialisation has the same steps for master
and slave modes, except the timing parameters are only
needed in master mode.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260120130729.1679560-3-heikki.krogerus@linux.intel.com
The adapter can be registered just in the core instead of
separately in the master and slave drivers. The same applies
to the interrupt.
The dedicated "target only" (slave only) configuration
for this controller will be removed so that host mode
(master mode) will always be supported together with the
target mode. Therefore the descrption for the "target only"
configuration that appears in the "name" sysfs attribute
file is also dropped while at it.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260120130729.1679560-2-heikki.krogerus@linux.intel.com
Add tests for FEAT_LS64. Issue related instructions if feature
presents, no SIGILL should be received. When such instructions
operate on Device memory or non-cacheable memory, we may received
a SIGBUS during the test (w/o FEAT_LS64WB). Just ignore it since
we only tested whether the instruction itself can be issued as
expected on platforms declaring the support of such features.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Oliver Upton <oupton@kernel.org>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Will Deacon <will@kernel.org>
Armv8.7 introduces single-copy atomic 64-byte loads and stores
instructions and its variants named under FEAT_{LS64, LS64_V}.
These features are identified by ID_AA64ISAR1_EL1.LS64 and the
use of such instructions in userspace (EL0) can be trapped.
As st64bv (FEAT_LS64_V) and st64bv0 (FEAT_LS64_ACCDATA) can not be tell
apart, FEAT_LS64 and FEAT_LS64_ACCDATA which will be supported in later
patch will be exported to userspace, FEAT_LS64_V will be enabled only
in kernel.
In order to support the use of corresponding instructions in userspace:
- Make ID_AA64ISAR1_EL1.LS64 visbile to userspace
- Add identifying and enabling in the cpufeature list
- Expose these support of these features to userspace through HWCAP3
and cpuinfo
ld64b/st64b (FEAT_LS64) and st64bv (FEAT_LS64_V) is intended for
special memory (device memory) so requires support by the CPU, system
and target memory location (device that support these instructions).
The HWCAP3_LS64, implies the support of CPU and system (since no
identification method from system, so SoC vendors should advertise
support in the CPU if system also support them).
Otherwise for ld64b/st64b the atomicity may not be guaranteed or a
DABT will be generated, so users (probably userspace driver developer)
should make sure the target memory (device) also have the support.
For st64bv 0xffffffffffffffff will be returned as status result for
unsupported memory so user should check it.
Document the restrictions along with HWCAP3_LS64.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Oliver Upton <oupton@kernel.org>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Will Deacon <will@kernel.org>
Using FEAT_{LS64, LS64_V} instructions in a guest is also controlled
by HCRX_EL2.{EnALS, EnASR}. Enable it if guest has related feature.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Oliver Upton <oupton@kernel.org>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Will Deacon <will@kernel.org>
Instructions introduced by FEAT_{LS64, LS64_V} is controlled by
HCRX_EL2.{EnALS, EnASR}. Configure all of these to allow usage
at EL0/1.
This doesn't mean these instructions are always available in
EL0/1 if provided. The hypervisor still have the control at
runtime.
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Oliver Upton <oupton@kernel.org>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Will Deacon <will@kernel.org>
If FEAT_LS64WB not supported, FEAT_LS64* instructions only support
to access Device/Uncacheable memory, otherwise a data abort for
unsupported Exclusive or atomic access (0x35, UAoEF) is generated
per spec. It's implementation defined whether the target exception
level is routed and is possible to implemented as route to EL2 on a
VHE VM according to DDI0487L.b Section C3.2.6 Single-copy atomic
64-byte load/store.
If it's implemented as generate the DABT to the final enabled stage
(stage-2), inject the UAoEF back to the guest after checking the
memslot is valid.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Oliver Upton <oupton@kernel.org>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Will Deacon <will@kernel.org>
Add a bit of documentation for KVM_EXIT_ARM_LDST64B so that userspace
knows what to expect.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Oliver Upton <oupton@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Will Deacon <will@kernel.org>
The main use of {LD,ST}64B* is to talk to a device, which is hopefully
directly assigned to the guest and requires no additional handling.
However, this does not preclude a VMM from exposing a virtual device
to the guest, and to allow 64 byte accesses as part of the programming
interface. A direct consequence of this is that we need to be able
to forward such access to userspace.
Given that such a contraption is very unlikely to ever exist, we choose
to offer a limited service: userspace gets (as part of a new exit reason)
the ESR, the IPA, and that's it. It is fully expected to handle the full
semantics of the instructions, deal with ACCDATA, the return values and
increment PC. Much fun.
A canonical implementation can also simply inject an abort and be done
with it. Frankly, don't try to do anything else unless you have time
to waste.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Oliver Upton <oupton@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Will Deacon <will@kernel.org>
We use MODEL_MSCC_OCELOT effectively as a flag for comparing against
"compatible" property. Use device_is_compatible() directly to make it
clear.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260114081954.252160-3-andriy.shevchenko@linux.intel.com
In commit aef30c8d56 ("genirq: Warn about using IRQF_ONESHOT without a
threaded handler")[1], it will check IRQF_ONESHOT flag in IRQ request,
and gives a warning if there is no threaded handler. Drop this flag to
fix this warning.
Link: https://lore.kernel.org/r/20260112134013.eQWyReHR@linutronix.de/ [1]
Fixes: 5ea558473f ("i2c: spacemit: add support for SpacemiT K1 SoC")
Signed-off-by: Yixun Lan <dlan@kernel.org>
Cc: <stable@vger.kernel.org> # v6.15+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260122-05-k1-i2c-irq-v1-1-9b8d94bbcd22@kernel.org
The strtable is currently limited to a single entry string on unpack
even though domain has the concept of multiple entries within it. Make
this a reality as it will be used for tags and more advanced domain
transitions.
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Source blob may come from userspace and might be unaligned.
Try to optize the copying process by avoiding unaligned memory accesses.
- Added Fixes tag
- Added "Fix &" to description as this doesn't just optimize but fixes
a potential unaligned memory access
Fixes: e6e8bf4188 ("apparmor: fix restricted endian type warnings for dfa unpack")
Signed-off-by: Helge Deller <deller@gmx.de>
[jj: remove duplicate word "convert" in comment trigger checkpatch warning]
Signed-off-by: John Johansen <john.johansen@canonical.com>
strcpy() is deprecated; use memcpy() instead. Unlike strcpy(), memcpy()
does not copy the NUL terminator from the source string, which would be
overwritten anyway on every iteration when using strcpy(). snprintf()
then ensures that 'char *s' is NUL-terminated.
Replace the hard-coded path length to remove the magic number 6, and add
a comment explaining the extra 11 bytes.
Closes: https://github.com/KSPP/linux/issues/88
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Deal with the potential that sock and sock-sk can be NULL during
socket setup or teardown. This could lead to an oops. The fix for NULL
pointer dereference in __unix_needs_revalidation shows this is at
least possible for af_unix sockets. While the fix for af_unix sockets
applies for newer mediation this is still the fall back path for older
af_unix mediation and other sockets, so ensure it is covered.
Fixes: 56974a6fcf ("apparmor: add base infastructure for socket mediation")
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
The amp/speakers on the Lenovo Yoga Book 9i 13IRU8 laptop aren't
fully powered up, resulting in horrible tinny sound by default.
The kernel has an existing quirk for PCI SSID 0x17aa3843 which
matches this machine and several others. The quirk applies the
ALC287_FIXUP_IDEAPAD_BASS_SPK_AMP fixup, however the fixup does not
work on this machine.
This patch modifies the existing quirk by adding a check for the
subsystem ID 0x17aa3881. If present, ALC287_FIXUP_TAS2781_I2C will
be applied instead of ALC287_FIXUP_IDEAPAD_BASS_SPK_AMP. With this
change the TAS2781 amp is powered up, firmware is downloaded and
recognised by HDA/SOF - i.e. all is good, and we can boogie.
Code is re-used from alc298_fixup_lenovo_c940_duet7(), which fixes a
similar problem with two other Lenovo laptops.
Cross checked against ALSA cardinfo database for potential clashes.
Tested against 6.18.5 kernel built with Arch Linux default options.
Tested in HDA mode and SOF mode.
Note: Possible further work required to address quality of life issues
caused by the firmware's agressive power saving, and to improve ALSA
control mappings.
Signed-off-by: Martin Hamilton <m@martinh.net>
Link: https://patch.msgid.link/20260122-alc269-yogabook9i-fixup-v1-1-a6883429400f@martinh.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This driver is old and almost certainly entirely unused. The two other
parallel port Ethernet drivers (de600/de620) were removed by Paul
Gortmaker in commit 168e06ae26 ("drivers/net: delete old parallel
port de600/de620 drivers"), but this driver remained. Drop it - Paul's
reasoning applies here as well. To quote him:
"The parallel port is largely replaced by USB [...] Let us not pretend
that anyone cares about these drivers anymore, or worse - pretend that
anyone is using them on a modern kernel."
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Acked-by: Daniel Palmer <daniel@thingy.jp>
Link: https://patch.msgid.link/20260121084532.60606-1-enelsonmoore@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This DWC MSHC has a 128MB limitation where the data buffer size and start
address must not exceed the 128MB boundary. Registering the missing
'adma_write_desc' callback function.
Signed-off-by: Huan He <hehuan1@eswincomputing.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: 32b2633219 ("mmc: sdhci-of-dwcmshc: Add support for Eswin EIC7700")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Accessing the High-Speed registers requires the AXI clock to be enabled.
Signed-off-by: Huan He <hehuan1@eswincomputing.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: 32b2633219 ("mmc: sdhci-of-dwcmshc: Add support for Eswin EIC7700")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The MAX_FL (maximum frame length) and related calculations used ETH_HLEN,
which does not account for the 4-byte VLAN tag in tagged frames. This
caused the hardware to reject valid VLAN frames as oversized, resulting
in RX errors and dropped packets.
Use VLAN_ETH_HLEN instead of ETH_HLEN in the MAX_FL register setup,
cut-through mode threshold, buffer allocation, and max_mtu calculation.
Cc: stable@kernel.org # v6.18+
Fixes: 62b5bb7be7 ("net: fec: update MAX_FL based on the current MTU")
Fixes: d466c16026 ("net: fec: enable the Jumbo frame support for i.MX8QM")
Fixes: 59e9bf037d ("net: fec: add change_mtu to support dynamic buffer allocation")
Fixes: ec2a1681ed ("net: fec: use a member variable for maximum buffer size")
Signed-off-by: Clemens Gruber <mail@clemensgruber.at>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260121083751.66997-1-mail@clemensgruber.at
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
On 64bit arches, struct u64_stats_sync is empty and provides no help
against load/store tearing. Convert to u64_stats_t to ensure atomic
operations.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://patch.msgid.link/20260121082550.2389249-1-mmyangfl@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
On 64bit arches, struct u64_stats_sync is empty and provides no help
against load/store tearing. Convert to u64_stats_t to ensure atomic
operations.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://patch.msgid.link/20260121082348.2388314-1-mmyangfl@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In ovs_vport_get_upcall_stats(), some statistics protected by
u64_stats_sync, are read and accumulated in ignorance of possible
u64_stats_fetch_retry() events. These statistics are already accumulated
by u64_stats_inc(). Fix this by reading them into temporary variables
first.
Fixes: 1933ea365a ("net: openvswitch: Add support to count upcall packets")
Signed-off-by: David Yang <mmyangfl@gmail.com>
Acked-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20260121072932.2360971-1-mmyangfl@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The my_syscall*() macros are internal implementation details of nolibc.
Nolibc also provides the regular syscall(2), which is also a macro
and directly expands to the correct my_syscall().
Use syscall() instead.
As a side-effect this fixes some return value checks, as my_syscall()
returns the raw value as set by the kernel and does not set errno.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Replace WARN_ON with WARN_ONCE when detecting attempts to ioremap
RAM. This prevents log spam when a misbehaving driver repeatedly tries
to map RAM via ioremap.
A single warning is more than enough to show the broken code path, and
extra reports don't add extra information.
Warning floods have been seen in production environments where broken
external drivers hit this code path thousand of times, causing
unnecessary messages to be printed and pressure on the serial console.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
When CONFIG_CPUMASK_OFFSTACK is not enabled, and resuming from s2ram on
Renesas R-Car H3 (big.LITTLE 4x Cortex-A57 + 4x Cortex-A53), during
enabling of the first little core, a warning message is printed:
AMU: CPU[4] doesn't support AMU counters
This confuses users, as during boot amu_fie_setup() does not print such
a message, unless debugging is enabled (freq_counters_valid() prints
"CPU%d: counters are not supported.\n" at debug level in that case).
Hence drop the warning, freq_counters_valid() has already printed a
debug message anyway.
Fixes: 6fd9be0b7b ("arm64: topology: Handle AMU FIE setup on CPU hotplug")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
If skb_cow() is passed a headroom <= -NET_SKB_PAD, it will trigger a
BUG. As a result, use cases should avoid calling with a headroom that
is negative to prevent triggering this issue.
This is the same code pattern fixed in Commit 58fc7342b5 ("ipv6:
BUG() in pskb_expand_head() as part of calipso_skbuff_setattr()").
In cipso_v4_skbuff_setattr(), len_delta can become negative, leading to
a negative headroom passed to skb_cow(). However, the BUG is not
triggerable because the condition headroom <= -NET_SKB_PAD cannot be
satisfied due to limits on the IPv4 options header size.
Avoid potential problems in the future by only using skb_cow() to grow
the skb headroom.
Signed-off-by: Will Rosenberg <whrosenb@asu.edu>
Acked-by: Paul Moore <paul@paul-moore.com>
Link: https://patch.msgid.link/20260120155738.982771-1-whrosenb@asu.edu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
CONFIG_DEVICE_PRIVATE is a prerequisite for DRM_XE_GPUSVM.
Explicitly select it so that DRM_XE_GPUSVM is not unintentionally
left out from distro configs not explicitly enabling
CONFIG_DEVICE_PRIVATE.
v2:
- Select also CONFIG_ZONE_DEVICE since it's needed by
CONFIG_DEVICE_PRIVATE.
v3:
- Depend on CONFIG_ZONE_DEVICE rather than selecting it.
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20260121091048.41371-3-thomas.hellstrom@linux.intel.com
(cherry picked from commit 9386f49316)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Tonghao Zhang says:
====================
A series of minor optimizations of the bonding module
These patches mainly target the peer notify mechanism of the bonding module.
Including updates of peer notify, lock races, etc. For more information, please
refer to the patch.
Cc: Jay Vosburgh <jv@jvosburgh.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Hangbin Liu <liuhangbin@gmail.com>
Cc: Jason Xing <kerneljasonxing@gmail.com>
====================
Link: https://patch.msgid.link/cover.1768709239.git.tonghao@bamaicloud.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Although operations on the variable send_peer_notif are already within
a lock-protected critical section, there are cases where it is accessed
outside the lock. Therefore, READ_ONCE() and WRITE_ONCE() should be
added to it.
Cc: Jay Vosburgh <jv@jvosburgh.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Hangbin Liu <liuhangbin@gmail.com>
Cc: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Tonghao Zhang <tonghao@bamaicloud.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/c1dcc53442f4d0f67beb9e0a3e7a7a6a2c94c47f.1768709239.git.tonghao@bamaicloud.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
After the first trylock fail, retrying immediately is
not advised as there is a high probability of failing
to acquire the lock again. This optimization makes sense.
Cc: Jay Vosburgh <jv@jvosburgh.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Hangbin Liu <liuhangbin@gmail.com>
Cc: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Tonghao Zhang <tonghao@bamaicloud.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/9aba44f02163e8fe8dbaba63ff2df921bc2b114e.1768709239.git.tonghao@bamaicloud.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch tries to avoid the possible peer notify event loss.
In bond_mii_monitor()/bond_activebackup_arp_mon(), when we hold the rtnl lock:
- check send_peer_notif again to avoid unconditionally reducing this value.
- send_peer_notif may have been reset. Therefore, it is necessary to check
whether to send peer notify via bond_should_notify_peers() to avoid the
loss of notification events.
Cc: Jay Vosburgh <jv@jvosburgh.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Hangbin Liu <liuhangbin@gmail.com>
Cc: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Tonghao Zhang <tonghao@bamaicloud.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/78cef328822b94638c97638b89011c507b8bf19e.1768709239.git.tonghao@bamaicloud.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The rtnl lock might be locked, preventing ad_cond_set_peer_notif() from
acquiring the lock and updating send_peer_notif. This patch addresses
the issue by using a workqueue. Since updating send_peer_notif does
not require high real-time performance, such delayed updates are entirely
acceptable.
In fact, checking this value and using it in multiple places, all operations
are protected at the same time by rtnl lock, such as
- read send_peer_notif
- send_peer_notif--
- bond_should_notify_peers
By the way, rtnl lock is still required, when accessing bond.params.* for
updating send_peer_notif. In lacp mode, resetting send_peer_notif in
workqueue is safe, simple and effective way.
Additionally, this patch introduces bond_peer_notify_may_events(), which
is used to check whether an event should be sent. This function will be
used in both patch 1 and 2.
Cc: Jay Vosburgh <jv@jvosburgh.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Hangbin Liu <liuhangbin@gmail.com>
Cc: Jason Xing <kerneljasonxing@gmail.com>
Suggested-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Tonghao Zhang <tonghao@bamaicloud.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/f95accb5db0b10ce3ed2f834fc70f716c9abbb9c.1768709239.git.tonghao@bamaicloud.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
FEAT_PAN has been around since ARMv8.1 (over 11 years ago), has no compiler
dependency (we have our own accessors), and is a great security benefit.
Drop CONFIG_ARM64_PAN, and make the support unconditionnal.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
LSE atomics have been in the architecture since ARMv8.1 (released in
2014), and are hopefully supported by all modern toolchains.
Drop the optional nature of LSE support in the kernel, and always
compile the support in, as this really is very little code. LL/SC
still is the default, and the switch to LSE is done dynamically.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
This reverts commit 2b69987be5 ("sched: Add
task_struct->faults_disabled_mapping"), which added this field without
review or maintainer signoff. With bcachefs removed from the
tree it is also unused now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260122085223.487092-1-hch@lst.de
Currently, rq->idle_stamp is only used to calculate avg_idle during
wakeups. This means other paths that move a task to an idle CPU such as
fork/clone, execve, or migrations, do not end the CPU's idle status in
the scheduler's eyes, leading to an inaccurate avg_idle.
This patch introduces update_rq_avg_idle() to provide a more accurate
measurement of CPU idle duration. By invoking this helper in
put_prev_task_idle(), we ensure avg_idle is updated whenever a CPU
stops being idle, regardless of how the new task arrived.
Testing on an 80-core Ampere Altra (ARMv8) with 6.19-rc5 baseline:
- Hackbench : +7.2% performance gain at 16 threads.
- Schbench: Reduced p99.9 tail latencies at high concurrency.
Signed-off-by: Shubhang Kaushik <shubhang@os.amperecomputing.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: Shubhang Kaushik <shubhang@os.amperecomputing.com>
Link: https://patch.msgid.link/20260121-v8-patch-series-v8-1-b7f1cbee5055@os.amperecomputing.com
