collect_mounts() has several problems - one can't iterate over the results
directly, so it has to be done with callback passed to iterate_mounts();
it has an oopsable race with d_invalidate(); it creates temporary clones
of mounts invisibly for sync umount (IOW, you can have non-lazy umount
succeed leaving filesystem not mounted anywhere and yet still busy).
A saner approach is to give caller an array of struct path that would pin
every mount in a subtree, without cloning any mounts.
* collect_mounts()/drop_collected_mounts()/iterate_mounts() is gone
* collect_paths(where, preallocated, size) gives either ERR_PTR(-E...) or
a pointer to array of struct path, one for each chunk of tree visible under
'where' (i.e. the first element is a copy of where, followed by (mount,root)
for everything mounted under it - the same set collect_mounts() would give).
Unlike collect_mounts(), the mounts are *not* cloned - we just get pinning
references to the roots of subtrees in the caller's namespace.
Array is terminated by {NULL, NULL} struct path. If it fits into
preallocated array (on-stack, normally), that's where it goes; otherwise
it's allocated by kmalloc_array(). Passing 0 as size means that 'preallocated'
is ignored (and expected to be NULL).
* drop_collected_paths(paths, preallocated) is given the array returned
by an earlier call of collect_paths() and the preallocated array passed to that
call. All mount/dentry references are dropped and array is kfree'd if it's not
equal to 'preallocated'.
* instead of iterate_mounts(), users should just iterate over array
of struct path - nothing exotic is needed for that. Existing users (all in
audit_tree.c) are converted.
[folded a fix for braino reported by Venkat Rao Bagalkote <venkat88@linux.ibm.com>]
Fixes: 80b5dce8c5 ("vfs: Add a function to lazily unmount all mounts from any dentry")
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
FWSEC-FRTS is the first firmware we need to run on the GSP falcon in
order to initiate the GSP boot process. Introduce the structure that
describes it.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250619-nova-frts-v6-16-ecf41ef99252@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Booting the GSP on Ampere requires an intricate dance between the GSP
and SEC2 falcons, where the GSP starts by running the FWSEC firmware to
create the WPR2 region , and then SEC2 loads the actual RISC-V firmware
into the GSP.
Add the common Falcon code and HAL for Ampere GPUs, and instantiate the
GSP and SEC2 Falcons that will be required to perform that dance and
boot the GSP.
Thanks to Ben Skeggs for pointing out an important bug in the memory
scrubbing code that could lead to a race condition and ultimately a
failure to boot the GSP!
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250619-nova-frts-v6-15-ecf41ef99252@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Reserve a page of system memory so sysmembar can perform a read on it if
a system write occurred since the last flush. Do this early as it can be
required to e.g. reset the GPU falcons.
Chipsets capabilities differ in that respect, so this commit also
introduces the FB HAL.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250619-nova-frts-v6-14-ecf41ef99252@nvidia.com
[ * Use kernel::page::PAGE_SIZE instead of kernel::bindings::PAGE_SIZE.
* Get rid of the Option for SysmemFlush.
* Slightly reword SysmemFlush doc-comments.
- Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
dma_map_XXX() can fail and should be tested for errors with
dma_mapping_error().
Fixes: b3a271a94d ("[SCSI] qla4xxx: support iscsiadm session mgmt")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://lore.kernel.org/r/20250618071742.21822-2-fourier.thomas@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The reproducer uses a file0 on a ntfs3 file system with a corrupted i_link.
When renaming, the file0's inode is marked as a bad inode because the file
name cannot be deleted.
The underlying bug is that make_bad_inode() is called on a live inode.
In some cases it's "icache lookup finds a normal inode, d_splice_alias()
is called to attach it to dentry, while another thread decides to call
make_bad_inode() on it - that would evict it from icache, but we'd already
found it there earlier".
In some it's outright "we have an inode attached to dentry - that's how we
got it in the first place; let's call make_bad_inode() on it just for shits
and giggles".
Fixes: 78ab59fee0 ("fs/ntfs3: Rework file operations")
Reported-by: syzbot+1aa90f0eb1fc3e77d969@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=1aa90f0eb1fc3e77d969
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
After applying this patch, could correctly create symlink:
ln -s "relative/path/to/file" symlink
Signed-off-by: Rong Zhang <ulin0208@gmail.com>
[almaz.alexandrovich@paragon-software.com: added cpu_to_le32 macro to
rs->Flags assignment]
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
The symlinks created in windows will be broken in linux by ntfs3,
the patch fixes it.
Signed-off-by: Rong Zhang <ulin0208@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
dma_map_XXX() functions return as error values DMA_MAPPING_ERROR which is
often ~0. The error value should be tested with dma_mapping_error() like
it was done in qla26xx_dport_diagnostics().
Fixes: 818c7f87a1 ("scsi: qla2xxx: Add changes in preparation for vendor extended FDMI/RDP")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://lore.kernel.org/r/20250617161115.39888-2-fourier.thomas@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add pm80xx_fatal_error_uevent_emit() which is called when the pm80xx
driver encouters a fatal error. The uevent has the following additional
custom key/value pair sets:
- DRIVER: driver name, pm80xx in this case
- HBA_NUM: the scsi host id of the device
- EVENT_TYPE: to indicate a fatal error
- REPORTED_BY: either driver or firmware
The uevent is anchored to the kernel object that represents the SCSI
controller, which includes other useful core variables, such as, ACTION,
DEVPATH, SUBSYSTEM, and more.
The fatal_error_uevent_emit() function is called when the controller
fatal error state changes. Since this doesn't happen often for a
specific SCSI host, there is no worries of a uevent storm.
Signed-off-by: Salomon Dushimirimana <salomondush@google.com>
Link: https://lore.kernel.org/r/20250616190018.2136260-1-salomondush@google.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since we will need to allocate lots of distinct memory chunks to be
shared between GPU and CPU, introduce a type dedicated to that. It is a
light wrapper around CoherentAllocation.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250619-nova-frts-v6-13-ecf41ef99252@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Upon reset, the GPU executes the GFW (GPU Firmware) in order to
initialize its base parameters such as clocks. The driver must ensure
that this step is completed before using the hardware.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250619-nova-frts-v6-12-ecf41ef99252@nvidia.com
[ Slightly adjust comments in wait_gfw_boot_completion(). - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Erase command is slow on discrete graphics storage
and may overshot PCI completion timeout.
BMG introduces the ability to have non-posted erase.
Add driver support for non-posted erase with polling
for erase completion.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Reuven Abliyev <reuven.abliyev@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://lore.kernel.org/r/20250617145159.3803852-9-alexander.usyskin@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Enable access to internal non-volatile memory on DGFX
with GSC/CSC devices via a child device.
The nvm child device is exposed via auxiliary bus.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://lore.kernel.org/r/20250617145159.3803852-7-alexander.usyskin@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Register the on-die nvm device with the mtd subsystem.
Refcount nvm object on _get and _put mtd callbacks.
For erase operation address and size should be 4K aligned.
For write operation address and size has to be 4bytes aligned.
CC: Rodrigo Vivi <rodrigo.vivi@intel.com>
CC: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Co-developed-by: Tomas Winkler <tomasw@gmail.com>
Signed-off-by: Tomas Winkler <tomasw@gmail.com>
Co-developed-by: Vitaly Lubart <lubvital@gmail.com>
Signed-off-by: Vitaly Lubart <lubvital@gmail.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://lore.kernel.org/r/20250617145159.3803852-5-alexander.usyskin@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
In intel-dg, there is no access to the spi controller,
the information is extracted from the descriptor region.
CC: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Co-developed-by: Tomas Winkler <tomasw@gmail.com>
Signed-off-by: Tomas Winkler <tomasw@gmail.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://lore.kernel.org/r/20250617145159.3803852-3-alexander.usyskin@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Justin Tee <justintee8345@gmail.com> says:
Update lpfc to revision 14.4.0.10
This patch set contains bug fixes related to diagnostic log messaging,
driver initialization and removal, updates to mailbox command handling,
and string modifications for obsolete adapter model descriptions.
The patches were cut against Martin's 6.17/scsi-queue tree.
Link: https://lore.kernel.org/r/20250618192138.124116-1-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Obsolete adapters' model description strings are updated to indicate that
they are no longer supported. End-of-life adapters will still remain
probed by the lpfc driver based on PCI id.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20250618192138.124116-12-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The CQ_CREATE_SET mailbox command's bitfields are updated. Rename the
cqe_cnt and separate high/low bitfield names to help resolve confusion
between two similar bitfield definitions. Corresponding usages of the
newly defined bitfields are updated as well.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20250618192138.124116-11-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Move clearing of HBA_SETUP flag out of lpfc_sli_brdrestart_s4 and before
lpfc_sli4_queue_unset. lpfc_sli4_queue_unset kfrees phba queues, so
clear the HBA_SETUP atomic flag to signal that the phba struct is no
longer initialized.
Also, add a check for the HBA_SETUP flag in the lpfc_sli4_io_xri_aborted
routine before dereferencing the ELS WQ.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20250618192138.124116-10-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For SLI3, the HBA_SETUP flag is never set so the lpfc_dev_loss_tmo_callbk
always early returns. Add a phba->sli_rev check for SLI4 mode so that
the SLI3 path can flow through the original dev_loss_tmo worker thread
design to lpfc_dev_loss_tmo_handler instead of early return.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20250618192138.124116-9-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Port wide initialization flags FLOGI_ISSUED and RHBA_CMPL make more sense
to be cleared upon a link down event rather than waiting for a link up
event. By moving clearing of these initializatin flags to a link down
handler, future confusion on the state of initialization is avoided.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20250618192138.124116-8-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There are unnecessary checks on an HBA's interface type and family before
erroring out a failed lpfc_get_sli4_parameters mailbox command. Simplify
the error handling by logging a message and proceeding to memory free
labels.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20250618192138.124116-7-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If an FDMI request completes with local reject status and the request is
not retryable, there's no need to parse an FDMI response payload. Insert
an early return statement for such cases.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20250618192138.124116-6-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During rmmod, all ndlp objects are cleaned up and marked with the
NLP_DROPPED flag indicating that an ndlp object is currently being
released. Thus, if an RSCN is received during driver unload, then
walking the fc_nodes list to process the RSCN is unnecessary because the
ndlp objects are very shortly going to be released.
In the lpfc_rscn_recovery_check routine, early return if the driver is in
the middle of unloading by checking for the FC_UNLOADING flag.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20250618192138.124116-5-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If a call to lpfc_sli4_read_rev() from lpfc_sli4_hba_setup() fails, the
resultant cleanup routine lpfc_sli4_vport_delete_fcp_xri_aborted() may
occur before sli4_hba.hdwqs are allocated. This may result in a null
pointer dereference when attempting to take the abts_io_buf_list_lock for
the first hardware queue. Fix by adding a null ptr check on
phba->sli4_hba.hdwq and early return because this situation means there
must have been an error during port initialization.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20250618192138.124116-4-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Initialization parameters for trace rings used in debugfs are sometimes
automatically adjusted. This patch corrects and updates the
corresponding log messages.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20250618192138.124116-3-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Unsupported and rejected CT MIB request log messages are changed to
KERN_WARNING level. Also, remove extra space in log message.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20250618192138.124116-2-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
While programming the hardware, we frequently need to busy-wait until
a condition (like a given bit of a register to switch value) happens.
Add a basic `wait_on` helper function to wait on such conditions
expressed as a closure, with a timeout argument.
This is temporary as we will switch to `read_poll_timeout` [1] once it
is available.
Link: https://lore.kernel.org/lkml/20250220070611.214262-8-fujita.tomonori@gmail.com/ [1]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250619-nova-frts-v6-11-ecf41ef99252@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Merge series from AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>:
This series adds support for the DVFSRC regulators found on the MediaTek
MT8196 Chromebook SoC and the (unrelated) MT6893 Dimensity 1200.
Add a selftest to verify that eventfd+irqfd bindings are globally unique,
i.e. that KVM doesn't allow multiple irqfds to bind to a single eventfd,
even across VMs.
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250522235223.3178519-14-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add helpers to create eventfds and to (de)assign eventfds via KVM_IRQFD.
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250522235223.3178519-13-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Assert that eventfd() succeeds in the Xen shinfo test instead of skipping
the associated testcase. While eventfd() is outside the scope of KVM, KVM
unconditionally selects EVENTFD, i.e. the syscall should always succeed.
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250522235223.3178519-12-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Now that the eventfd's waitqueue ensures it has at most one priority
waiter, i.e. prevents KVM from binding multiple irqfds to one eventfd,
drop KVM's sanity check that eventfds are unique for a single VM.
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250522235223.3178519-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Disallow binding an irqfd to an eventfd that already has a priority waiter,
i.e. to an eventfd that already has an attached irqfd. KVM always
operates in exclusive mode for EPOLL_IN (unconditionally returns '1'),
i.e. only the first waiter will be notified.
KVM already disallows binding multiple irqfds to an eventfd in a single
VM, but doesn't guard against multiple VMs binding to an eventfd. Adding
the extra protection reduces the pain of a userspace VMM bug, e.g. if
userspace fails to de-assign before re-assigning when transferring state
for intra-host migration, then the migration will explicitly fail as
opposed to dropping IRQs on the destination VM.
Temporarily keep KVM's manual check on irqfds.items, but add a WARN, e.g.
to allow sanity checking the waitqueue enforcement.
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: David Matlack <dmatlack@google.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250522235223.3178519-10-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a waitqueue helper to add a priority waiter that requires exclusive
wakeups, i.e. that requires that it be the _only_ priority waiter. The
API will be used by KVM to ensure that at most one of KVM's irqfds is
bound to a single eventfd (across the entire kernel).
Open code the helper instead of using __add_wait_queue() so that the
common path doesn't need to "handle" impossible failures.
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250522235223.3178519-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Don't set WQ_FLAG_EXCLUSIVE when adding an irqfd to a wait queue, as
irqfd_wakeup() unconditionally returns '0', i.e. doesn't actually operate
in exclusive mode.
Note, the use of WQ_FLAG_PRIORITY is also dubious, but that's a problem
for another day.
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250522235223.3178519-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Drop the setting of WQ_FLAG_EXCLUSIVE from add_wait_queue_priority() and
instead have callers manually add the flag prior to adding their structure
to the queue. Blindly setting WQ_FLAG_EXCLUSIVE is flawed, as the nature
of exclusive, priority waiters means that only the first waiter added will
ever receive notifications.
Pushing the flawed behavior to callers will allow fixing the problem one
hypervisor at a time (KVM added the flawed API, and then KVM's code was
copy+pasted nearly verbatim by Xen and Hyper-V), and will also allow for
adding an API that provides true exclusivity, i.e. that guarantees at most
one priority waiter is in the queue.
Opportunistically add a comment in Hyper-V to call out the mess. Xen
privcmd's irqfd_wakefup() doesn't actually operate in exclusive mode, i.e.
can be "fixed" simply by dropping WQ_FLAG_EXCLUSIVE. And KVM is primed to
switch to the aforementioned fully exclusive API, i.e. won't be carrying
the flawed code for long.
No functional change intended.
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250522235223.3178519-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add an irqfd to its target eventfd's waitqueue while holding irqfds.lock,
which is mildly terrifying but functionally safe. irqfds.lock is taken
inside the waitqueue's lock, but if and only if the eventfd is being
released, i.e. that path is mutually exclusive with registration as KVM
holds a reference to the eventfd (and obviously must do so to avoid UAF).
This will allow using the eventfd's waitqueue to enforce KVM's requirement
that eventfd is assigned to at most one irqfd, without introducing races.
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250522235223.3178519-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add the irqfd structure to KVM's list of irqfds in kvm_irqfd_register(),
i.e. via the vfs_poll() callback. This will allow taking irqfds.lock
across the entire registration sequence (add to waitqueue, add to list),
and more importantly will allow inserting into KVM's list if and only if
adding to the waitqueue succeeds (spoiler alert), without needing to
juggle return codes in weird ways.
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250522235223.3178519-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Initialize the irqfd waitqueue callback immediately prior to inserting the
irqfd into the eventfd's waitqueue. Pre-initializing the state in a
completely different context is all kinds of confusing, and incorrectly
suggests that the waitqueue function needs to be initialize prior to
vfs_poll().
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250522235223.3178519-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>