Document support for the USB2.0 phy found on the Renesas RZ/V2N
(R9A09G056) SoC. The USB2.0 phy is functionally identical to that on the
RZ/V2H(P) SoC, so no driver changes are needed. The existing
`renesas,usb2-phy-r9a09g057` compatible will be used as a fallback
for the RZ/V2N SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250528133858.168582-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Convert the Marvell Armada-375 USB and MVEBU SATA PHY binding to DT
schema format. It's a straight forward conversion.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20250607212609.743346-1-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Convert the TI Keystone USB PHY binding to DT schema format. Drop the
"#address-cells" and "#size-cells" properties which don't make sense
without any child nodes.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250607212641.744683-1-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Convert the TI DM816x USB PHY binding to DT schema format. It's a
straight forward conversion.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250607212634.744373-1-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Commit 3f6d1767b1 ("phy: ufs-qcom: Refactor all init steps into
phy_poweron") moved the phy_power_on/off from ufs_qcom_setup_clocks
to suspend/resume func.
To have a better power saving, remove the phy_power_on/off calls from
resume/suspend path and put them back to ufs_qcom_setup_clocks, so that
PHY regulators & clks can be turned on/off along with UFS's clocks.
Since phy phy_power_on is separated out from phy calibrate, make
separate calls to phy_power_on calls from ufs qcom driver.
Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Link: https://lore.kernel.org/r/20250526153821.7918-11-quic_nitirawa@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In qmp_ufs_power_off, the PHY is already powered down by asserting
QPHY_PCS_POWER_DOWN_CONTROL. Therefore, additional phy_reset and
stopping SerDes are unnecessary. Also this approach does not
align with the phy HW programming guide.
Thus, refactor qmp_ufs_power_off to remove the phy_reset and stop
SerDes calls to simplify the code and ensure alignment with the PHY
HW programming guide.
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250526153821.7918-10-quic_nitirawa@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
qmp_ufs_exit() is a wrapper function. It only calls qmp_ufs_com_exit().
Remove it to simplify the ufs phy driver.
Additonally partial Inline(dropping the reset assert) qmp_ufs_com_exit
into qmp_ufs_power_off function to avoid unnecessary function call
and to align with the Phy programming guide.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Link: https://lore.kernel.org/r/20250526153821.7918-9-quic_nitirawa@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Rename qmp_ufs_disable to qmp_ufs_power_off to better represent its
functionality. Additionally, inline qmp_ufs_exit into qmp_ufs_power_off
function to preserve the functionality of .power_off.
There is no functional change.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Link: https://lore.kernel.org/r/20250526153821.7918-8-quic_nitirawa@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The qmp_ufs_power_on() function acts as a wrapper, solely invoking
qmp_ufs_com_init(). Additionally, the code within qmp_ufs_com_init()
does not correspond well with its name.
Therefore, to enhance the readability and eliminate unnecessary
function call inline qmp_ufs_com_init() into qmp_ufs_power_on().
There is no change to the functionality.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Link: https://lore.kernel.org/r/20250526153821.7918-7-quic_nitirawa@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Refactor the UFS PHY reset handling to parse the reset logic only once
during initialization, instead of every resume.
As part of this change, move the UFS PHY reset parsing logic from
qmp_phy_power_on to the new qmp_ufs_phy_init function introduced
as part of phy_ops::init callback.
Co-developed-by: Ram Kumar Dwivedi <quic_rdwivedi@quicinc.com>
Signed-off-by: Ram Kumar Dwivedi <quic_rdwivedi@quicinc.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250526153821.7918-6-quic_nitirawa@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Commit 052553af6a ("ufs/phy: qcom: Refactor to use phy_init call")
puts enabling regulators & clks, calibrating UFS PHY, starting serdes
and polling PCS ready status into phy_power_on.
In Current code regulators enable, clks enable, calibrating UFS PHY,
start_serdes and polling PCS_ready_status are part of phy_power_on.
UFS PHY registers are retained after power collapse, meaning calibrating
UFS PHY, start_serdes and polling PCS_ready_status can be done only when
hba is powered_on, and not needed every time when phy_power_on is called
during resume. Hence keep the code which enables PHY's regulators & clks
in phy_power_on and move the rest steps into phy_calibrate function.
Refactor the code to retain PHY regulators & clks in phy_power_on and
move out rest of the code to new phy_calibrate function.
Also move reset_control_assert to qmp_ufs_phy_calibrate to align
with Hardware programming guide.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Link: https://lore.kernel.org/r/20250526153821.7918-5-quic_nitirawa@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Introduce a new phy calibrate API call in the UFS Qualcomm driver to
separate phy calibration from phy power-on. This change is a precursor
to the successive commits in this series, which requires these two
operations to be distinct.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20250526153821.7918-3-quic_nitirawa@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When transitioning from USB_ROLE_DEVICE to USB_ROLE_NONE, the code
assumed that the regulator should be disabled. However, if the regulator
is marked as always-on, regulator_is_enabled() continues to return true,
leading to an incorrect attempt to disable a regulator which is not
enabled.
This can result in warnings such as:
[ 250.155624] WARNING: CPU: 1 PID: 7326 at drivers/regulator/core.c:3004
_regulator_disable+0xe4/0x1a0
[ 250.155652] unbalanced disables for VIN_SYS_5V0
To fix this, we move the regulator control logic into
tegra186_xusb_padctl_id_override() function since it's directly related
to the ID override state. The regulator is now only disabled when the role
transitions from USB_ROLE_HOST to USB_ROLE_NONE, by checking the VBUS_ID
register. This ensures that regulator enable/disable operations are
properly balanced and only occur when actually transitioning to/from host
mode.
Fixes: 49d46e3c7e ("phy: tegra: xusb: Add set_mode support for UTMI phy on Tegra186")
Cc: stable@vger.kernel.org
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20250502092606.2275682-1-waynec@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The logic that drives the pad calibration values resides in the
controller reset domain and so the calibration values are only being
captured when the controller is out of reset. However, by clearing the
CYA_TRK_CODE_UPDATE_ON_IDLE bit, the calibration values can be set
while the controller is in reset.
The CYA_TRK_CODE_UPDATE_ON_IDLE bit was previously cleared based on the
trk_hw_mode flag, but this dependency is not necessary. Instead,
introduce a new flag, trk_update_on_idle, to independently control this
bit.
Fixes: d8163a32ca ("phy: tegra: xusb: Add Tegra234 support")
Cc: stable@vger.kernel.org
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20250519090929.3132456-2-waynec@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support for Exynos7870 in the existing MIPI CSIS/DSIM driver. The
SoC has one DSIM phy and three CSIS phys.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250612-exynos7870-mipi-phy-v1-2-3fff0b62d9d3@disroot.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
syzbot reports that it can trigger a WARN_ON() for kmalloc() attempt
that's too big:
WARNING: CPU: 0 PID: 6488 at mm/slub.c:5024 __kvmalloc_node_noprof+0x520/0x640 mm/slub.c:5024
Modules linked in:
CPU: 0 UID: 0 PID: 6488 Comm: syz-executor312 Not tainted 6.15.0-rc7-syzkaller-gd7fa1af5b33e #0 PREEMPT
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __kvmalloc_node_noprof+0x520/0x640 mm/slub.c:5024
lr : __do_kmalloc_node mm/slub.c:-1 [inline]
lr : __kvmalloc_node_noprof+0x3b4/0x640 mm/slub.c:5012
sp : ffff80009cfd7a90
x29: ffff80009cfd7ac0 x28: ffff0000dd52a120 x27: 0000000000412dc0
x26: 0000000000000178 x25: ffff7000139faf70 x24: 0000000000000000
x23: ffff800082f4cea8 x22: 00000000ffffffff x21: 000000010cd004a8
x20: ffff0000d75816c0 x19: ffff0000dd52a000 x18: 00000000ffffffff
x17: ffff800092f39000 x16: ffff80008adbe9e4 x15: 0000000000000005
x14: 1ffff000139faf1c x13: 0000000000000000 x12: 0000000000000000
x11: ffff7000139faf21 x10: 0000000000000003 x9 : ffff80008f27b938
x8 : 0000000000000002 x7 : 0000000000000000 x6 : 0000000000000000
x5 : 00000000ffffffff x4 : 0000000000400dc0 x3 : 0000000200000000
x2 : 000000010cd004a8 x1 : ffff80008b3ebc40 x0 : 0000000000000001
Call trace:
__kvmalloc_node_noprof+0x520/0x640 mm/slub.c:5024 (P)
kvmalloc_array_node_noprof include/linux/slab.h:1065 [inline]
io_rsrc_data_alloc io_uring/rsrc.c:206 [inline]
io_clone_buffers io_uring/rsrc.c:1178 [inline]
io_register_clone_buffers+0x484/0xa14 io_uring/rsrc.c:1287
__io_uring_register io_uring/register.c:815 [inline]
__do_sys_io_uring_register io_uring/register.c:926 [inline]
__se_sys_io_uring_register io_uring/register.c:903 [inline]
__arm64_sys_io_uring_register+0x42c/0xea8 io_uring/register.c:903
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49
el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151
el0_svc+0x58/0x17c arch/arm64/kernel/entry-common.c:767
el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:786
el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600
which is due to offset + buffer_count being too large. The registration
code checks only the total count of buffers, but given that the indexing
is an array, it should also check offset + count. That can't exceed
IORING_MAX_REG_BUFFERS either, as there's no way to reach buffers beyond
that limit.
There's no issue with registrering a table this large, outside of the
fact that it's pointless to register buffers that cannot be reached, and
that it can trigger this kmalloc() warning for attempting an allocation
that is too large.
Cc: stable@vger.kernel.org
Fixes: b16e920a19 ("io_uring/rsrc: allow cloning at an offset")
Reported-by: syzbot+cb4bf3cb653be0d25de8@syzkaller.appspotmail.com
Link: https://lore.kernel.org/io-uring/684e77bd.a00a0220.279073.0029.GAE@google.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The Exynos7870 MIPI PHY device contains one DSIM PHY block and three
CSIS PHY blocks. It also requires two sysregs, one for display, and the
other for cameras. Document this device.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250612-exynos7870-mipi-phy-v1-1-3fff0b62d9d3@disroot.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This commit adds a work item to handle events of 1394 OHCI AT
request/response contexts, and queues the item to the specific
workqueue. The call of struct fw_packet.callbaqck() is done in the
workqueue when receiving acknowledgement to the asynchronous packet
transferred to remote node.
Link: https://lore.kernel.org/r/20250615133253.433057-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
This commit adds a work item to handle events of 1394 OHCI AR
request/response contexts, and queues the item to the specific workqueue.
The call of struct fw_address_handler.address_callback() is done in the
workqueue when receiving any requests from the remove nodes. Additionally,
the call of struct fw_packet.callback() is done in the workqueue too when
receiving acknowledge to the asynchronous packet for the response
subaction of split transaction to the remote nodes.
Link: https://lore.kernel.org/r/20250615133253.433057-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Some tasklets (softIRQs) are still used as bottom-halves to handle
events for 1394 OHCI AR/AT contexts. However, using softIRQs for IRQ
bottom halves is generally discouraged today.
This commit adds a per-fw_card workqueue to accommodate the behaviour
specified by the 1394 OHCI specification.
According to the 1394 OHCI specification, system memory pages are
reserved for each asynchronous DMA context. This allows concurrent
operation across contexts. In the 1394 OHCI PCI driver implementation,
the hardware generates IRQs either upon receiving asynchronous packets
from other nodes (incoming) or after completing transmission to them
(outgoing). These independent events can occur in the same transmission
cycle, therefore the max_active parameter for the workqueue is set to the
total number of AR/AT contexts (=4). The WQ_UNBOUND flag is used to
allow the work to be scheduled on any available core, since there is
little CPU cache affinity benefit for the data.
Each DMA context uses a circular descriptor list in system memory,
allowing deferred data processing in software as long as buffer overrun
are avoided. Since the overall operation is sleepable except for small
atomic regions, WQ_BH is not used. As the descriptors contain
timestamps, WQ_HIGHPRI is specified to support semi-real-time
processing.
The asynchronous context is also used by the SCSI over IEEE 1394
protocol implementation (sbp2), which can be part of memory reclaim paths.
Therefore, WQ_MEM_RECLAIM is required.
To allow uses to adjust CPU affinity according to workload, WQ_SYSFS is
specified so that workqueue attributes are exposed to user space.
Link: https://lore.kernel.org/r/20250615133253.433057-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Add ethqos_pcs_set_inband() to improve readability, and to allow future
changes when phylink PCS support is properly merged.
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> # sa8775p-ride-r3
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/E1uPkbO-004EyA-EU@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
phys_port_id_show, phys_port_name_show and phys_switch_id_show would
return -EOPNOTSUPP if the netdev didn't implement the corresponding
method.
There is no point in creating these files if they are unsupported.
Put these attributes in netdev_phys_group and implement the is_visible
method. make phys_(port_id, port_name, switch_id) invisible if the netdev
dosen't implement the corresponding method.
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250612142707.4644-1-yajun.deng@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
cpumask_next_wrap() is more verbose and efficient comparing to
cpumask_next() followed by cpumask_first().
Signed-off-by: Yury Norov [NVIDIA] <yury.norov@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20250614155031.340988-3-yury.norov@gmail.com
cpumask_any_but() is more verbose than cpumask_first() followed by
cpumask_next(). Use it in clocksource_verify_choose_cpus().
Signed-off-by: Yury Norov [NVIDIA] <yury.norov@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20250614155031.340988-2-yury.norov@gmail.com
Refactor the way firmware names are handled for the ICSSG PRUETH driver.
Instead of using hardcoded firmware name arrays for different modes (EMAC,
SWITCH, HSR), the driver now reads the firmware names from the device tree
property "firmware-name". Only the EMAC firmware names are specified in the
device tree property. The firmware names for all other supported modes are
generated dynamically based on the EMAC firmware names by replacing
substrings (e.g., "eth" with "sw" or "hsr") as appropriate.
Example: Below are the firmwares used currently for PRU0 core
EMAC: ti-pruss/am65x-sr2-pru0-prueth-fw.elf
SW : ti-pruss/am65x-sr2-pru0-prusw-fw.elf
HSR : ti-pruss/am65x-sr2-pru0-pruhsr-fw.elf
All three firmware names are same except for the operating mode.
In general for PRU0 core, firmware name is,
ti-pruss/am65x-sr2-pru0-pru<mode>-fw.elf
Since the EMAC firmware names are defined in DT, driver will read those
directly and for other modes swap the mode name. i.e. eth -> sw or
eth -> hsr.
This preserves backwards compatibility as ICSSG driver is supported only
by AM65x and AM64x. Both of these have "firmware-name" property
populated in their device tree.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250613064547.44394-1-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since secs_to_jiffies()(commit:b35108a51cf7) has been introduced, we can
use it to avoid scaling the time to msec.
Signed-off-by: Yuesong Li <liyuesong@vivo.com>
Reviewed-by: Joe Damato <joe@dama.to>
Reviewed-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250613102014.3070898-1-liyuesong@vivo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=N1zM
-----END PGP SIGNATURE-----
Merge tag 'block-6.16-20250614' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- Fix for a deadlock on queue freeze with zoned writes
- Fix for zoned append emulation
- Two bio folio fixes, for sparsemem and for very large folios
- Fix for a performance regression introduced in 6.13 when plug
insertion was changed
- Fix for NVMe passthrough handling for polled IO
- Document the ublk auto registration feature
- loop lockdep warning fix
* tag 'block-6.16-20250614' of git://git.kernel.dk/linux:
nvme: always punt polled uring_cmd end_io work to task_work
Documentation: ublk: Separate UBLK_F_AUTO_BUF_REG fallback behavior sublists
block: Fix bvec_set_folio() for very large folios
bio: Fix bio_first_folio() for SPARSEMEM without VMEMMAP
block: use plug request list tail for one-shot backmerge attempt
block: don't use submit_bio_noacct_nocheck in blk_zone_wplug_bio_work
block: Clear BIO_EMULATES_ZONE_APPEND flag on BIO completion
ublk: document auto buffer registration(UBLK_F_AUTO_BUF_REG)
loop: move lo_set_size() out of queue freeze