Callers switched to CLASS(filename_maybe_null) (in fs/xattr.c)
and CLASS(filename_complete_delayed) (in io_uring/xattr.c).
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iQJPBAABCAA5FiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAmlqGMYbFIAAAAAABAAO
bWFudTIsMi41KzEuMTEsMiwyAAoJEFKgDEdIgJTyT0UP/3Wn4tm0h0n3XeyujQEA
IPNisJCczF6aWIAuwccRigR8hQFriPNvkZ5AhMGtotZJrY3uUoe1/8aF+XIdqnl/
Yb1434AGwVNIpSaap+vtEclHrLDmzZH+Z75/FTWQwldM/hPkPWJI8fsEuRLqBZsn
v520NBFtrQVcOZKKNy0npBnHsC0DsAmqoZuOvLTx0mx5AyE029CfPbDMZuVnSNix
KjZ4U5KL0qDs2LIMpdB/mqprydGkHdogdIbrPK3WtzStVgNbi9VmnV19ZwbUlXJM
rYPbtbQg3htwuspgR+yM6O21qsthRf2qZF5+2/a929IzOBsD/qAXQbbxQWVpF7Qb
ELYXNV4N5hqm9EW8WeOOpLKUUG7k0fRPf81X/07uGVafPMQKQJ8kFNgLBkBFR4ya
RAMNxTPHbHQvVaLcRujxZXoC4Wh3ZTunQXpIouy0p9dKOzbsCAj0ZqeqDa09UsaW
rCEm50p/Pd1csML8a9A/2nNoWjQzuSVmML7F6obGCOWaW6p21GhSKHzqqDIjBab9
3wxhpllVeYRYS2yhkKjOPJkQKXo3idIdpieLpW8IVbJvp/gQgmeKjWdhnvNvUan9
hyCzfI8OZXVz0vItBfWsoX44+6UtpLHd4o16aDYjyDItflJOPuQbWzky+icT2R3x
8B5xPC08tmEGitf3miv2EGq9
=d/xV
-----END PGP SIGNATURE-----
Merge tag 'printk-for-6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk fix from Petr Mladek:
- Prevent softlockup by restoring IRQs in atomic flush after each
record
* tag 'printk-for-6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk/nbcon: Restore IRQ in atomic flush after each emitted record
filename_renameat2() replaces do_renameat2(); unlike the latter,
it does not drop filename references - these days it can be just
as easily arranged in the caller.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add copyright line to the core driver.
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Implement a measurement sequence that does not involve a one byte read of
the status byte before reading the conversion.
The sensor's conversions should be read either once the EoC interrupt
has triggered or 5ms after the 0xaa command. See Options 1 and 2
respectively in Tables 16 (page 15) and 18 (page 18) of the datasheet.
Note that Honeywell's example code also covered in the datasheet follows
Option 2 for both i2c and SPI.
The datasheet does not specify any of the retry parameters that are
currently implemented in the driver. A simple 5+ms sleep as specified in
Option 2 is enough for a valid measurement sequence.
The change also gets rid of the code duplication tied to the verification
of the status byte.
This change only affects users that do not define the EoC interrupt in
the device tree.
Datasheet: https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/micropressure-mpr-series/documents/sps-siot-mpr-series-datasheet-32332628-ciid-172626.pdf?download=false
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Make sure a valid conversion comes with a status byte that only has
the MPR_ST_POWER bit set.
Return -EBUSY if also MPR_ST_BUSY is set or -EIO otherwise.
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Move memset() from the bus specific code into core.
Zeroing out the buffer is performed because the sensor has noticeable
latch-up sensitivity and in some cases it clamps the MISO signal to GND
in sync with SCLK [1]. A raw conversion of zero is out of bounds since
valid values have to be between output_min and output_max (and the
smallest output_min is 2.5% of 2^24 = 419430).
The user is expected to discard out of bounds pressure values.
Given the fact that we can't follow the behaviour of all SPI controllers
when faced to this clamping of an output signal, a raw conversion of zero
is used as an early warning in case the low level SPI API reacts
unexpectedly.
Link: https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1588325/am3358-spi-tx-data-corruption [1]
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use a tx_buf that is part of the priv struct for transferring data to
the sensor instead of relying on a devm_kzalloc()-ed array.
Remove the .init operation in the process.
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
For the reason of better naming consistency rename priv->buffer into
priv->rx_buf since tx_buf will get introduced in the next patch.
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove the iio_chan_spec and iio_dev structs which are already defined in
the included iio.h header.
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
A sign change is needed for proper calculation of the pressure.
This is a minor fix since it only affects users that might have custom
silicon from Honeywell that has honeywell,pmin-pascal != 0.
Also due to the fact that raw pressure values can not be lower
than output_min (400k-3.3M) there is no need to calculate a decimal for
the offset.
Fixes: 713337d914 ("iio: pressure: Honeywell mprls0025pa pressure sensor")
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fix the scan_type sign and realbits assignment.
The pressure is a 24bit unsigned int between output_min and output_max.
transfer function A: 10% to 90% of 2^24
transfer function B: 2.5% to 22.5% of 2^24
transfer function C: 20% to 80% of 2^24
[MPR_FUNCTION_A] = { .output_min = 1677722, .output_max = 15099494 }
[MPR_FUNCTION_B] = { .output_min = 419430, .output_max = 3774874 }
[MPR_FUNCTION_C] = { .output_min = 3355443, .output_max = 13421773 }
Fixes: 713337d914 ("iio: pressure: Honeywell mprls0025pa pressure sensor")
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Interrupt falling/rising flags should only be defined in the device tree.
Fixes: 713337d914 ("iio: pressure: Honeywell mprls0025pa pressure sensor")
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Make sure that the spi_transfer struct is zeroed out before use.
Fixes: a0858f0cd2 ("iio: pressure: mprls0025pa add SPI driver")
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQSmtYVZ/MfVMGUq1GNcsMJ8RxYuYwUCaWnveQAKCRBcsMJ8RxYu
Y0O2AX9BkFKr3/bucy59KNJwtCNJ1oK/dGTF5/7b9GqICH/OA6rEiIn4tlZvmxyA
o3w9UYsBgPt811ISnYfyPCw5jRD5fyD7Y1uldy5ZSah5fl4g297/MdXHmgV/icLe
eo7/0jYRLw==
=8VNu
-----END PGP SIGNATURE-----
Merge tag 'xfs-fixes-6.19-rc6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Carlos Maiolino:
"Just a few obvious fixes and some 'cosmetic' changes"
* tag 'xfs-fixes-6.19-rc6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: set max_agbno to allow sparse alloc of last full inode chunk
xfs: Fix xfs_grow_last_rtg()
xfs: improve the assert at the top of xfs_log_cover
xfs: fix an overly long line in xfs_rtgroup_calc_geometry
xfs: mark __xfs_rtgroup_extents static
xfs: Fix the return value of xfs_rtcopy_summary()
xfs: fix memory leak in xfs_growfs_check_rtgeom()
In commit 7352e1d593 ("can: gs_usb: gs_usb_receive_bulk_callback(): fix
URB memory leak"), the URB was re-anchored before usb_submit_urb() in
gs_usb_receive_bulk_callback() to prevent a leak of this URB during
cleanup.
However, this patch did not take into account that usb_submit_urb() could
fail. The URB remains anchored and
usb_kill_anchored_urbs(&parent->rx_submitted) in gs_can_close() loops
infinitely since the anchor list never becomes empty.
To fix the bug, unanchor the URB when an usb_submit_urb() error occurs,
also print an info message.
Fixes: 7352e1d593 ("can: gs_usb: gs_usb_receive_bulk_callback(): fix URB memory leak")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/all/20260110223836.3890248-1-kuba@kernel.org/
Link: https://patch.msgid.link/20260116-can_usb-fix-reanchor-v1-1-9d74e7289225@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The idea behind series 6c1f5146b2 ("Merge patch series "can: raw: better
approach to instantly reject unsupported CAN frames"") is to set the
capabilities of a CAN device (CAN-CC, CAN-FD, CAN-XL, and listen only) [1]
and, based on these capabilities, reject unsupported CAN frames in the
CAN-RAW protocol [2].
This works perfectly for CAN devices configured in CAN-FD or CAN-XL mode.
CAN devices with static CAN control modes define their capabilities via
can_set_static_ctrlmode() -> can_set_cap_info(). CAN devices configured by
the user space for CAN-FD or CAN-XL set their capabilities via
can_changelink() -> can_ctrlmode_changelink() -> can_set_cap_info().
However, in commit 166e87329c ("can: propagate CAN device capabilities
via ml_priv"), the capabilities of CAN devices are not initialized.
This results in CAN-RAW rejecting all CAN frames on devices directly
after ifup if the user space has not changed the CAN control mode.
Fix this problem by setting the default capabilities to CAN-CC in
alloc_candev_mqs() as soon as the CAN specific ml_priv is allocated.
[1] commit 166e87329c ("can: propagate CAN device capabilities via ml_priv")
[2] commit faba5860fc ("can: raw: instantly reject disabled CAN frames")
Fixes: 166e87329c ("can: propagate CAN device capabilities via ml_priv")
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260116-can_add_missing_set_caps-v1-1-7525126d8b20@pengutronix.de
[mkl: fix typo in subject]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add a multicore configuration for the Terasic de0 nano FPGA development
board. This SoC runs 2 OpenRISC CPUs at 50Mhz with 32MB ram, UART for
console and GPIOs for LEDs.
This FPGA SoC is based on the simple-smp reference board and brings in
devices from the de0 nano common DTSI file.
A default config is added that brings together the device tree and
driver setup.
Link: https://github.com/stffrdhrn/de0_nano-multicore
Signed-off-by: Stafford Horne <shorne@gmail.com>
Split out the common memory, CPU and PIC definitions of the simple SMP
system to a DTSI file which we will later use for our De0 Nano multicore
board device tree. We also take this opportunity to swich underscores
to dashes as that seems to be the more common convention for DTS files.
Signed-off-by: Stafford Horne <shorne@gmail.com>
Commit c056718464 ("openrisc: sleep instead of spin on secondary
wait") fixed OpenRISC SMP Linux for QEMU. However, stability was never
achieved on FPGA development boards. This is because the above patch
has a step to unmask IPIs on non-boot cpu's but on hardware without
power management, IPIs remain masked.
This meant that IPI's were never actually working on the simple SMP
systems we run on development boards. The systems booted but stability
was very suspect.
Add the ability to unmask IPI's on the non-boot cores. This is done by
making the OMPIC IRQs proper percpu IRQs. We can then use the
enabled_percpu_irq() to unmask IRQ on the non-boot cpus.
Update the or1k PIC driver to use a flow handler that can switch between
percpu and the configured level or edge flow handlers at runtime.
This mechanism is inspired by that done in the J-Core AIC driver.
Signed-off-by: Stafford Horne <shorne@gmail.com>
Acked-by: Thomas Gleixner <tglx@kernel.org>
The de0 nano from Terasic is an FPGA board that we use in the OpenRISC
community to test OpenRISC configurations. Add a base configuration for
the board that runs an OpenRISC CPU at 50Mhz with 32MB ram, UART for
console and some GPIOs for LEDs and switches.
There is an older version of this floating around that defines all of
the hardware on the board including SPI's, flash devices, sram, ADCs
etc. Eventually it would be good to get the full version upstream
but for now I think a minimal board is good to start with.
Link: https://openrisc.io/tutorials/de0_nano/
Link: https://github.com/olofk/de0_nano
Signed-off-by: Stafford Horne <shorne@gmail.com>
Insert Soft Reserved memory into a dedicated soft_reserve_resource tree
instead of the iomem_resource tree at boot. Delay publishing these ranges
into the iomem hierarchy until ownership is resolved and the HMEM path
is ready to consume them.
Publishing Soft Reserved ranges into iomem too early conflicts with CXL
hotplug and prevents region assembly when those ranges overlap CXL
windows.
Follow up patches will reinsert Soft Reserved ranges into iomem after CXL
window publication is complete and HMEM is ready to claim the memory. This
provides a cleaner handoff between EFI-defined memory ranges and CXL
resource management without trimming or deleting resources later.
In the meantime "Soft Reserved" resources will no longer appear in
/proc/iomem, only their results. I.e. with "memmap=4G%4G+0xefffffff"
Before:
100000000-1ffffffff : Soft Reserved
100000000-1ffffffff : dax1.0
100000000-1ffffffff : System RAM (kmem)
After:
100000000-1ffffffff : dax1.0
100000000-1ffffffff : System RAM (kmem)
The expectation is that this does not lead to a user visible regression
because the dax1.0 device is created in both instances.
Co-developed-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
[Smita: incorporate feedback from x86 maintainer review]
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Link: https://patch.msgid.link/20251120031925.87762-2-Smita.KoralahalliChannabasappa@amd.com
[djbw: cleanups and clarifications]
Link: https://lore.kernel.org/69443f707b025_1cee10022@dwillia2-mobl4.notmuch
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Update the nested dirty log test to validate KVM's handling of READ faults
when dirty logging is enabled. Specifically, set the Dirty bit in the
guest PTEs used to map L2 GPAs, so that KVM will create writable SPTEs
when handling L2 read faults. When handling read faults in the shadow MMU,
KVM opportunistically creates a writable SPTE if the mapping can be
writable *and* the gPTE is dirty (or doesn't support the Dirty bit), i.e.
if KVM doesn't need to intercept writes in order to emulate Dirty-bit
updates.
To actually test the L2 READ=>WRITE sequence, e.g. without masking a false
pass by other test activity, route the READ=>WRITE and WRITE=>WRITE
sequences to separate L1 pages, and differentiate between "marked dirty
due to a WRITE access/fault" and "marked dirty due to creating a writable
SPTE for a READ access/fault". The updated sequence exposes the bug fixed
by KVM commit 1f4e5fc83a ("KVM: x86: fix nested guest live migration
with PML") when the guest performs a READ=>WRITE sequence with dirty guest
PTEs.
Opportunistically tweak and rename the address macros, and add comments,
to make it more obvious what the test is doing. E.g. NESTED_TEST_MEM1
vs. GUEST_TEST_MEM doesn't make it all that obvious that the test is
creating aliases in both the L2 GPA and GVA address spaces, but only when
L1 is using TDP to run L2.
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Reviewed-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://patch.msgid.link/20260115172154.709024-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a wrapper macro, ENC_TO_VMCS12_IDX(), to get a vmcs12 index given a
field encoding in anticipation of adding a macro to get from a vmcs12 index
back to the field encoding. And because open coding ROL16(n, 6) everywhere
is gross.
No functional change intended.
Suggested-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://patch.msgid.link/20260115173427.716021-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move the call to nested_vmx_setup_ctls_msrs() from vmx_hardware_setup() to
nested_vmx_hardware_setup() so that the nested code can deal with ordering
dependencies without having to straddle vmx_hardware_setup() and
nested_vmx_hardware_setup(). Specifically, an upcoming change will
sanitize the vmcs12 fields based on hardware support, and that code needs
to run _before_ the MSRs are configured, because the lovely vmcs_enum MSR
depends on the max support vmcs12 field.
No functional change intended.
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://patch.msgid.link/20260115173427.716021-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Replace simple_strtoul() with the recommended kstrtoint() for parsing
the 'devtmpfs.mount=' boot parameter. Unlike simple_strtoul(), which
returns an unsigned long, kstrtoint() converts the string directly to
int and avoids implicit casting.
Check the return value of kstrtoint() and reject invalid values. This
adds error handling while preserving behavior for existing values, and
removes use of the deprecated simple_strtoul() helper. The current code
silently sets 'mount_dev = 0' if parsing fails, instead of leaving the
default value (IS_ENABLED(CONFIG_DEVTMPFS_MOUNT)) unchanged.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20251220125930.76836-2-thorsten.blum@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'devtmpfs_context_ops' object is not exported outside the
devtmpfs.c file nor defined anywhere for use outside. Make this
static to remove the following sparse warning:
drivers/base/devtmpfs.c:88:30: warning: symbol 'devtmpfs_context_ops' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Link: https://patch.msgid.link/20260116150745.1330145-1-ben.dooks@codethink.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some of the hardware registers of the DMM-32-AT board are multiplexed,
using the least significant two bits of the Miscellaneous Control
register to select the function of registers at offsets 12 to 15:
00 => 8254 timer/counter registers are accessible
01 => 8255 digital I/O registers are accessible
10 => Reserved
11 => Calibration registers are accessible
The interrupt service routine (`dmm32at_isr()`) clobbers the bottom two
bits of the register with value 00, which would interfere with access to
the 8255 registers by the `dm32at_8255_io()` function (used for Comedi
instruction handling on the digital I/O subdevice).
Make use of the generic Comedi device spin-lock `dev->spinlock` (which
is otherwise unused by this driver) to serialize access to the
miscellaneous control register and paged registers.
Fixes: 3c501880ac ("Staging: comedi: add dmm32at driver")
Cc: stable@vger.kernel.org
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20260112162835.91688-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit
afd2627f72 ("tracing: Check "%s" dereference via the field and not the TP_printk format")
forbids to emit event with a plain char* without a wrapper.
The reg parameter always passed as static string and wrapper
is not strictly required, contrary to dev parameter.
Use the string wrapper anyway to check sanity of the reg parameters,
store it value independently and prevent internal kernel data leaks.
Since some code refactoring has taken place, explicit backporting may
be needed for kernels older than 6.10.
Cc: stable@vger.kernel.org # v6.11+
Fixes: a0a927d06d ("mei: me: add io register tracing")
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20260111145125.1754912-1-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current '-ENODEV' check uses '&&', which can lead to a NULL pointer
dereference when udev is NULL.
Fix the condition to return -ENODEV if either udev or its pdev is NULL.
Fixes: 3397c3cd85 ("uio: Add SVA support for PCI devices via uio_pci_generic_sva.c")
Signed-off-by: Haiyue Wang <haiyuewa@163.com>
Link: https://patch.msgid.link/20260109175448.34309-1-haiyuewa@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Directly calling `put_queue` carries risks since it cannot
guarantee that resources of `uacce_queue` have been fully released
beforehand. So adding a `stop_queue` operation for the
UACCE_CMD_PUT_Q command and leaving the `put_queue` operation to
the final resource release ensures safety.
Queue states are defined as follows:
- UACCE_Q_ZOMBIE: Initial state
- UACCE_Q_INIT: After opening `uacce`
- UACCE_Q_STARTED: After `start` is issued via `ioctl`
When executing `poweroff -f` in virt while accelerator are still
working, `uacce_fops_release` and `uacce_remove` may execute
concurrently. This can cause `uacce_put_queue` within
`uacce_fops_release` to access a NULL `ops` pointer. Therefore, add
state checks to prevent accessing freed pointers.
Fixes: 015d239ac0 ("uacce: add uacce driver")
Cc: stable@vger.kernel.org
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Link: https://patch.msgid.link/20251202061256.4158641-5-huangchenghai2@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current uacce_vm_ops does not support the mremap operation of
vm_operations_struct. Implement .mremap to return -EPERM to remind
users.
The reason we need to explicitly disable mremap is that when the
driver does not implement .mremap, it uses the default mremap
method. This could lead to a risk scenario:
An application might first mmap address p1, then mremap to p2,
followed by munmap(p1), and finally munmap(p2). Since the default
mremap copies the original vma's vm_private_data (i.e., q) to the
new vma, both munmap operations would trigger vma_close, causing
q->qfr to be freed twice(qfr will be set to null here, so repeated
release is ok).
Fixes: 015d239ac0 ("uacce: add uacce driver")
Cc: stable@vger.kernel.org
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Link: https://patch.msgid.link/20251202061256.4158641-4-huangchenghai2@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
uacce supports the device isolation feature. If the driver
implements the isolate_err_threshold_read and
isolate_err_threshold_write callback functions, uacce will create
sysfs files now. Users can read and configure the isolation policy
through sysfs. Currently, sysfs files are created as long as either
isolate_err_threshold_read or isolate_err_threshold_write callback
functions are present.
However, accessing a non-existent callback function may cause the
system to crash. Therefore, intercept the creation of sysfs if
neither read nor write exists; create sysfs if either is supported,
but intercept unsupported operations at the call site.
Fixes: e3e289fbc0 ("uacce: supports device isolation feature")
Cc: stable@vger.kernel.org
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Link: https://patch.msgid.link/20251202061256.4158641-3-huangchenghai2@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When cdev_device_add fails, it internally releases the cdev memory,
and if cdev_device_del is then executed, it will cause a hang error.
To fix it, we check the return value of cdev_device_add() and clear
uacce->cdev to avoid calling cdev_device_del in the uacce_remove.
Fixes: 015d239ac0 ("uacce: add uacce driver")
Cc: stable@vger.kernel.org
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Link: https://patch.msgid.link/20251202061256.4158641-2-huangchenghai2@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clean up of_find_slim_device() by folding in the of_find_slim_device()
helper.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251126145329.5022-7-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unlike slim_get_device() the of_slim_get_device() helper does not
allocate and register any slimbus devices in case lookup fails.
Update the of_slim_get_device() kernel doc to reflect this and add a
comment about the helper taking a reference to the returned device.
Fixes: e0772de8a4 ("slimbus: core: add of_slim_device_get() helper")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251126145329.5022-6-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a comment to clarify that slim_get_device() takes a reference to
the embedded struct device of the returned slimbus device.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251126145329.5022-5-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
