On disconnect drm_atomic_helper_disable_all() is called which
sets both the fb and crtc for a plane to NULL before invoking a commit.
This causes a kernel oops on every display disconnect.
Add guards for those dereferences.
Cc: <stable@vger.kernel.org> # 6.18.x
Fixes: 73cfd166e0 ("drm/gud: Replace simple display pipe with DRM atomic helpers")
Signed-off-by: Shenghao Yang <me@shenghaoyang.info>
Reviewed-by: Ruben Wauters <rubenru09@aol.com>
Signed-off-by: Ruben Wauters <rubenru09@aol.com>
Link: https://patch.msgid.link/20251231055039.44266-1-me@shenghaoyang.info
Instead of having the pv spinlock function definitions in paravirt.h,
move them into the new header paravirt-spinlock.h.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20260105110520.21356-22-jgross@suse.com
The TS133 is a one-bay NAS mostly similar to the other devices in the
series. The main difference is that it is build around the RK3566 SoC
instead of the RK3568 variant.
The RK3566/RK3568 are mostly similar with only slight variants in both
speed and some specific peripherals - the RK3568 has more.
The specific for the NAS series stay the same though.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260104191448.2693309-6-heiko@sntech.de
QNAP builds a number of variants of the RK356x-based NAS design.
Add the 1-bay TS133 variant.
This one is a tiny bit special as it is based around the RK3566 variant
of the mostly similar RK3566/RK3568 SoCs.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260104191448.2693309-5-heiko@sntech.de
The common used SATA controller on all TSx33 devices is actually SATA2.
So move the SATA controller + combophy enablement to their correct
position between shared dtsi and board devicetrees.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260104191448.2693309-3-heiko@sntech.de
The TS133 while mostly similar, is based around the RK3566 variant, so
needs a different SoC include.
By moving the SoC include to the board devicetrees, we can still keep
the shared common setup, while supporting the different base SoCs.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260104191448.2693309-2-heiko@sntech.de
Change the test suite name string to "snd-hda-cirrus-scodec-test".
It was incorrectly named "snd-hda-scodec-cs35l56-test", a leftover
from when the code under test was actually in the cs35l56 driver.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 2144833e7b ("ALSA: hda: cirrus_scodec: Add KUnit test")
Link: https://patch.msgid.link/20260113134056.619051-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In order to prepare having multiple pv_ops arrays, specify the array in the
paravirt macros.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20260105110520.21356-21-jgross@suse.com
For consistency with __vdso_clock_gettime64() there should also be a
64-bit variant of clock_getres(). This will allow the extension of
CONFIG_COMPAT_32BIT_TIME to the vDSO and finally the removal of 32-bit
time types from the kernel and UAPI.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20251223-vdso-compat-time32-v1-9-97ea7a06a543@linutronix.de
For consistency with __vdso_clock_gettime64() there should also be a
64-bit variant of clock_getres(). This will allow the extension of
CONFIG_COMPAT_32BIT_TIME to the vDSO and finally the removal of 32-bit
time types from the kernel and UAPI.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://patch.msgid.link/20251223-vdso-compat-time32-v1-8-97ea7a06a543@linutronix.de
For consistency with __vdso_clock_gettime64() there should also be a
64-bit variant of clock_getres(). This will allow the extension of
CONFIG_COMPAT_32BIT_TIME to the vDSO and finally the removal of 32-bit
time types from the kernel and UAPI.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20251223-vdso-compat-time32-v1-7-97ea7a06a543@linutronix.de
The vDSO code hides symbols which are non-functional.
__vdso_clock_getres() was not added to this list when it got introduced.
Fixes: 052e76a31b ("ARM: 8931/1: Add clock_getres entry point")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20251223-vdso-compat-time32-v1-6-97ea7a06a543@linutronix.de
For consistency with __vdso_clock_gettime64() there should also be a
64-bit variant of clock_getres(). This will allow the extension of
CONFIG_COMPAT_32BIT_TIME to the vDSO and finally the removal of 32-bit
time types from the kernel and UAPI.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20251223-vdso-compat-time32-v1-5-97ea7a06a543@linutronix.de
SYS_clock_getres might have been redirected by libc to some other system
call than the actual clock_getres. For testing it is required to use
exactly this system call.
Use the system call number exported by the UAPI headers which is always
correct.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20251223-vdso-compat-time32-v1-3-97ea7a06a543@linutronix.de
For consistency with __vdso_clock_gettime64() there should also be a
64-bit variant of clock_getres(). This will allow the extension of
CONFIG_COMPAT_32BIT_TIME to the vDSO and finally the removal of 32-bit
time types from the kernel and UAPI. The generic vDSO library already
provides nearly all necessary building blocks for architectures to
provide this function. Only a prototype is missing.
Add the prototype to the generic header so architectures can start
providing this function.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20251223-vdso-compat-time32-v1-1-97ea7a06a543@linutronix.de
Loongson PCI controllers found in LS2K1000/2000 SoCs
(loongson,ls2k-pci), 7A1000/2000 bridge chips (loongson,ls7a-pci), and
RS780E bridge chips (loongson,rs780e-pci) all have their paired MSI
controllers.
Though only the one in LS2K2000 SoC is described in devicetree, we
should document the property for all variants. For the same reason, it
isn't marked as required for now.
Fixes: 83e757ecfd ("dt-bindings: Document Loongson PCI Host Controller")
Signed-off-by: Yao Zi <me@ziyao.cc>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251209140006.54821-3-me@ziyao.cc
The AH CQP command wait loop executes in an atomic context and was
using a fixed 1 ms delay. Since many AH create commands can complete
much faster than 1 ms, use poll_timeout_us_atomic with a 1 us delay.
Also, use the timeout value indicated during the capability exchange
rather than a hard-coded value.
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Link: https://patch.msgid.link/20260105180550.2907858-1-jmoroni@google.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Set gpiochip parent to the struct device of the dummy GPIO driver
so that the software node will be associated with the GPIO chip.
The recent commit e5d527be7e ("gpio: swnode: don't use the
swnode's name as the key for GPIO lookup") broke cirrus_scodec_test,
because the software node no longer gets associated with the GPIO
driver by name.
Instead, setting struct gpio_chip.parent to the owning struct device
will find the node using a normal fwnode lookup.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 2144833e7b ("ALSA: hda: cirrus_scodec: Add KUnit test")
Link: https://patch.msgid.link/20260113130954.574670-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A dma_wmb() is not necessary before a writel() because writel()
already has an even stronger store barrier. A dma_wmb() is only
required to order writes to consistent/DMA memory whereas the
barrier in writel() is specified to order writes to DMA memory as
well as MMIO.
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Link: https://patch.msgid.link/20260103172517.2088895-1-jmoroni@google.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
rtrs_srv_change_state() returns bool (true on success) therefore
there is no reason to print error when it fails as it always will
be 0.
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Link: https://patch.msgid.link/20260107161517.56357-11-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
When the connection establishment request is rejected from the server
side, then the actual error number sent back should be used.
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Link: https://patch.msgid.link/20260107161517.56357-10-haris.iqbal@ionos.com
Reviewed-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add HCA name and port of this HCA.
This would help with analysing and debugging the logs.
The logs would looks something like this,
rtrs_server L2516: Handling event: port error (10).
HCA name: mlx4_0, port num: 2
rtrs_client L3326: Handling event: port error (10).
HCA name: mlx4_0, port num: 1
Signed-off-by: Kim Zhu <zhu.yanjun@ionos.com>
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://patch.msgid.link/20260107161517.56357-9-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Excessive error logging is making it difficult to identify the root
cause of issues. Implement rate limiting to improve log clarity.
Signed-off-by: Kim Zhu <zhu.yanjun@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://patch.msgid.link/20260107161517.56357-8-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
During several network incidents, a number of RTRS paths for a session
went through disconnect and reconnect phase. However, some of those did
not auto-reconnect successfully. Instead they failed with the following
logs,
On client,
kernel: rtrs_client L1991: <sess-name>: Connect rejected: status 28
(consumer defined), rtrs errno -104
kernel: rtrs_client L2698: <sess-name>: init_conns() failed: err=-104
path=gid:<gid1>@gid:<gid2> [mlx4_0:1]
On server, (log a)
kernel: ibtrs_server L1868: <>: Connection already exists: 0
When the misbehaving path was removed, and add_path was called to re-add
the path, the log on client side changed to, (log b)
kernel: rtrs_client L1991: <sess-name>: Connect rejected: status 28
(consumer defined), rtrs errno -17
There was no log on the server side for this, which is expected since
there is no logging in that path,
if (unlikely(__is_path_w_addr_exists(srv, &cm_id->route.addr))) {
err = -EEXIST;
goto err;
Because of the following check on server side,
if (unlikely(sess->state != IBTRS_SRV_CONNECTING)) {
ibtrs_err(s, "Session in wrong state: %s\n",
.. we know that the path in (log a) was in CONNECTING state.
The above state of the path persists for as long as we leave the session
be. This means that the path is in some zombie state, probably waiting
for the info_req packet to arrive, which never does.
The changes in this commits does 2 things.
1) Add logs at places where we see the errors happening. The logs would
shed more light at the state and lifetime of such zombie paths.
2) Close such zombie sessions, only if they are in CONNECTING state, and
after an inactivity period of 30 seconds.
i) The state check prevents closure of paths which are CONNECTED.
Also, from the above logs and code, we already know that the path could
only be on CONNECTING state, so we play safe and narrow our impact surface
area by closing only CONNECTING paths.
ii) The inactivity period is to allow requests for other cid to finish
processing, or for any stray packets to arrive/fail.
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://patch.msgid.link/20260107161517.56357-7-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Remove unused members from rtrs_clt_io_req.
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://patch.msgid.link/20260107161517.56357-6-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The member variable status in the struct rdma_cm_event is used for both
linux errors and the errors definded in rdma stack.
Signed-off-by: Kim Zhu <zhu.yanjun@ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://patch.msgid.link/20260107161517.56357-5-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Support IB_MR_TYPE_SG_GAPS, which has less limitations
than standard IB_MR_TYPE_MEM_REG, a few ULP support this.
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Kim Zhu <zhu.yanjun@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://patch.msgid.link/20260107161517.56357-4-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Print error description instead of the error number.
Signed-off-by: Kim Zhu <zhu.yanjun@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://patch.msgid.link/20260107161517.56357-3-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
This fixes the following error on the server side:
RTRS server session allocation failed: -EINVAL
caused by the caller of the `ib_dma_map_sg()`, which does not expect
less mapped entries, than requested, which is in the order of things
and can be easily reproduced on the machine with enabled IOMMU.
The fix is to treat any positive number of mapped sg entries as a
successful mapping and cache DMA addresses by traversing modified
SG table.
Fixes: 9cb8374804 ("RDMA/rtrs: server: main functionality")
Signed-off-by: Roman Penyaev <r.peniaev@gmail.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://patch.msgid.link/20260107161517.56357-2-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Commit d633b8a702 ("libata: print feature list on device scan")
added a print of the features supported by the device for ATA_DEV_ATA and
ATA_DEV_ZAC devices, but not for ATA_DEV_ATAPI devices.
Fix this by printing the features also for ATAPI devices.
Before changes:
ata1.00: ATAPI: Slimtype DVD A DU8AESH, 6C2M, max UDMA/133
After changes:
ata1.00: ATAPI: Slimtype DVD A DU8AESH, 6C2M, max UDMA/133
ata1.00: Features: Dev-Attention HIPM DIPM
Fixes: d633b8a702 ("libata: print feature list on device scan")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Tested-by: Wolf <wolf@yoxt.cc>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
ata_dev_print_features() is supposed to return early and not print anything
if there are no features supported.
However, commit b1f5af54f1 ("ata: libata-core: Advertize device support
for DIPM and HIPM features") added additional features to
ata_dev_print_features() without updating the early return conditional.
Add the missing features to the early return conditional.
Fixes: b1f5af54f1 ("ata: libata-core: Advertize device support for DIPM and HIPM features")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Tested-by: Wolf <wolf@yoxt.cc>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
ata_dev_print_features() is supposed to return early and not print anything
if there are no features supported.
However, commit fe22e1c2f7 ("libata: support concurrent positioning
ranges log") added another feature to ata_dev_print_features() without
updating the early return conditional.
Add the missing feature to the early return conditional.
Fixes: fe22e1c2f7 ("libata: support concurrent positioning ranges log")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Tested-by: Wolf <wolf@yoxt.cc>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
The link_power_management_supported sysfs attribute is currently set as
true even for ata ports that lack a .set_lpm() callback, e.g. dummy ports.
This is a bit silly, because while writing to the
link_power_management_policy sysfs attribute will make ata_scsi_lpm_store()
update ap->target_lpm_policy (thus sysfs will reflect the new value) and
call ata_port_schedule_eh() for the port, it is essentially a no-op.
This is because for a port without a .set_lpm() callback, once EH gets to
run, the ata_eh_link_set_lpm() will simply return, since the port does not
provide a .set_lpm() callback.
Thus, make sure that the link_power_management_supported sysfs attribute
is set to false for ports that lack a .set_lpm() callback. This way the
link_power_management_policy sysfs attribute will no longer be writable,
so we will no longer be misleading users to think that their sysfs write
actually does something.
Fixes: 0060beec0b ("ata: libata-sata: Add link_power_management_supported sysfs attribute")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Tested-by: Wolf <wolf@yoxt.cc>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Commit d360121832 ("ata: libata-core: Introduce ata_dev_config_lpm()")
introduced ata_dev_config_lpm(). However, it only called this function for
ATA_DEV_ATA and ATA_DEV_ZAC devices, not for ATA_DEV_ATAPI devices.
Additionally, commit d99a9142e7 ("ata: libata-core: Move device LPM quirk
settings to ata_dev_config_lpm()") moved the LPM quirk application from
ata_dev_configure() to ata_dev_config_lpm(), causing LPM quirks for ATAPI
devices to no longer be applied.
Call ata_dev_config_lpm() also for ATAPI devices, such that LPM quirks are
applied for ATAPI devices with an entry in __ata_dev_quirks once again.
Fixes: d360121832 ("ata: libata-core: Introduce ata_dev_config_lpm()")
Fixes: d99a9142e7 ("ata: libata-core: Move device LPM quirk settings to ata_dev_config_lpm()")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Tested-by: Wolf <wolf@yoxt.cc>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
An AHCI HBA specifies the number of ports it supports using CAP.NP.
The HBA is free to only make a subset of the number of ports available
using the PI (Ports Implemented) register.
libata currently creates dummy ports for HBA ports that are provided by
the HBA, but which are marked as "unavailable" using the PI register.
Each port will have a per port area of registers in the HBA, regardless
if the port is marked as "unavailable" or not.
ahci_mark_external_port() currently reads this per port area of registers
using readl() to see if the port is marked as external/hotplug-capable.
However, AHCI 1.3.1, section "3.1.4 Offset 0Ch: PI – Ports Implemented"
states: "Software must not read or write to registers within unavailable
ports."
Thus, make sure that we only call ahci_mark_external_port() and
ahci_update_initial_lpm_policy() for ports that are implemented.
From a libata perspective, this should not change anything related to LPM,
as dummy ports do not provide any ap->ops (they do not have a .set_lpm()
callback), so even if EH were to call .set_lpm() on a dummy port, it was
already a no-op.
Fixes: f713193523 ("ata: ahci: move marking of external port earlier")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Tested-by: Wolf <wolf@yoxt.cc>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Factor out of ata_scsi_translate() the code handling queued command
deferral using the port qc_defer callback and issuing the queued
command with ata_qc_issue() into the new function ata_scsi_qc_issue(),
and simplify the goto used in ata_scsi_translate().
While at it, also add a lockdep annotation to check that the port lock
is held when ata_scsi_translate() is called.
No functional changes.
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
The ROHM BD72720 is a power management IC with a charger and coulomb
counter block which is closely related to the charger / coulomb counter
found from the BD71815, BD71828, BD71879 which are all supported by the
bd71828-power driver. Due to the similarities it makes sense to support
also the BD72720 with the same driver.
Add basic support for the charger logic on ROHM BD72720.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/fb74c0cab3dfe534135d26dbbb9c66699678c2de.1765804226.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
The BD71828 power-supply driver assumes register addresses to be 8-bit.
The new BD72720 will use stacked register maps to hide paging which is
done using secondary I2C slave address. This requires use of 9-bit
register addresses in the power-supply driver (added offset 0x100 to
the 8-bit hardware register addresses).
The cost is slightly used memory consumption as the members in the
struct pwr_regs will be changed from u8 to unsigned int, which means 3
byte increase / member / instance.
This is currently 14 members (expected to possibly be increased when
adding new variants / new functionality which may introduce new
registers, but not expected to grow much) and 2 instances (will be 3
instances when BD72720 gets added).
So, even if the number of registers grew to 50 it'd be 150 bytes /
instance. Assuming we eventually supported 5 variants, it'd be
5 * 150 bytes, which stays very reasonable considering systems we are
dealing with.
As a side note, we can reduce the "wasted space / member / instance" from
3 bytes to 1 byte, by using u16 instead of the unsigned int if needed. I
rather use unsigned int to be initially prepared for devices with 32 bit
registers if there is no need to count bytes.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/57c87f7e2082a666f0adeafcd11f673c0af7d326.1765804226.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
In order to prepare for defining paravirt functions outside of paravirt.h,
don't #undef the paravirt call macros.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20260105110520.21356-20-jgross@suse.com
The ROHM BD72720 has 6 pins which may be configured as GPIOs. The
GPIO1 ... GPIO5 and EPDEN pins. The configuration is done to OTP at the
manufacturing, and it can't be read at runtime. The device-tree is
required to tell the software which of the pins are used as GPIOs.
Keep the pin mapping static regardless the OTP. This way the user-space
can always access the BASE+N for GPIO(N+1) (N = 0 to 4), and BASE + 5
for the EPDEN pin. Do this by setting always the number of GPIOs to 6,
and by using the valid-mask to invalidate the pins which aren't configured
as GPIOs.
First two pins can be set to be either input or output by OTP. Direction
can't be changed by software. Rest of the pins can be set as outputs
only. All of the pins support generating interrupts.
Support the Input/Output state getting/setting and the output mode
configuration (open-drain/push-pull).
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/22e095ca92f0677ca3d3a768ad749629fc3c2006.1765804226.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
ROHM BD72720 is a power management IC which integrates 10 buck and 11 LDO
regulators. This PMIC has plenty of commonalities with the BD71828 and
BD71879.
The BD72720 does also have similar 'run-level'-concept as the BD71828 had.
It allows controlling the regulator's 'en masse', although only BUCK1
and LDO1 can utilize this in BD72720. Similar to BD71828, this 'en
masse' -control is not supported by this driver.
Support the voltage and enable/disable state control for the BD72720.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/88b82128648516d9dbb173044042f2a7a5dfdf1c.1765804226.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
