The SCSI subsystem has implemented dedicated callbacks for probe, remove
and shutdown. Make use of them. This fixes a runtime warning about the
driver needing to be converted to the bus probe method.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/b36de11cbc32265a52264da5c813dd6e1abd21fd.1766133330.git.u.kleine-koenig@baylibre.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Introduce a bus-specific probe, remove and shutdown function. For now
this only allows to get rid of a cast of the generic device to a SCSI
device in the drivers and changes the remove prototype to return
void---a non-zero return value is ignored anyhow.
The objective is to get rid of users of struct device_driver callbacks
.probe(), .remove() and .shutdown() to eventually remove these. Until
all SCSI drivers are converted, this results in a runtime warning about
the drivers needing an update because there is a bus probe function and
a driver probe function. The in-tree drivers are fixed by the following
commits.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/a54e363a3fd2054fb924afd7df44bca7f444b5f1.1766133330.git.u.kleine-koenig@baylibre.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This aligns with what other subsystems do, reduces boilerplate a bit for
device drivers and is less error prone.
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/ac17fdea58e384cb514c639306d48ce0005820b0.1766133330.git.u.kleine-koenig@baylibre.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The function cm_notify_event() was removed in commit 9584051f3c
("power: supply: charger-manager: Remove cm_notify_event function").
Remove the documentation that suggests how it can be used.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://patch.msgid.link/20260104171644.292437-1-Julia.Lawall@inria.fr
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
In `probe()`, `request_irq()` is called before allocating/registering a
`power_supply` handle. If an interrupt is fired between the call to
`request_irq()` and `power_supply_register()`, the `power_supply` handle
will be used uninitialized in `power_supply_changed()` in
`wm97xx_bat_update()` (triggered from the interrupt handler). This will
lead to a `NULL` pointer dereference since
Fix this racy `NULL` pointer dereference by making sure the IRQ is
requested _after_ the registration of the `power_supply` handle. Since
the IRQ is the last thing requests in the `probe()` now, remove the
error path for freeing it. Instead add one for unregistering the
`power_supply` handle when IRQ request fails.
Fixes: 7c87942aef ("wm97xx_battery: Use irq to detect charger state")
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://patch.msgid.link/97b55f0479a932eea7213844bf66f28a974e27a2.1766270196.git.waqar.hameed@axis.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Commit 5bff79dad2 ("power: supply: Add bd718(15/28/78) charger driver")
adds the file bd71828-power.c in drivers/power/supply/, whereas commit
b838cecc22 ("MAINTAINERS: Add entry for BD71828 charger") from the same
patch series, adds a section referring to the non-existing file
bd71828-charger.c in the directory above.
Adjust the file entry to refer to the intended existing file.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/20251107123621.425633-1-lukas.bulwahn@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Correct "bad line" warnings and add descriptions for missing entries
to avoid these warnings:
ab8500_chargalg.c:173: warning: bad line: is set
ab8500_chargalg.c:179: warning: bad line: increased
ab8500_chargalg.c:247: warning: Function parameter or struct member
't_hyst_norm' not described in 'ab8500_chargalg'
ab8500_chargalg.c:247: warning: Function parameter or struct member
't_hyst_lowhigh' not described in 'ab8500_chargalg'
ab8500_chargalg.c:247: warning: Function parameter or struct member
'ccm' not described in 'ab8500_chargalg'
ab8500_chargalg.c:247: warning: Function parameter or struct member
'ac_chg' not described in 'ab8500_chargalg'
ab8500_chargalg.c:247: warning: Function parameter or struct member
'usb_chg' not described in 'ab8500_chargalg'
ab8500_chargalg.c:308: warning: Function parameter or struct member
'state' not described in 'ab8500_chargalg_state_to'
ab8500_chargalg.c:773: warning: Function parameter or struct member
'di' not described in 'ab8500_chargalg_chg_curr_maxim'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20251111060009.1959425-1-rdunlap@infradead.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Memory pointer by pointer passed to dev_attr_psp() is not modified, so
with help of container_of_const() (preferred than container_of()) can be
made pointer to const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251126171859.72465-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
bq27xxx_write(), bq27xxx_read_block(), and bq27xxx_write_block()
return -EPERM when the bus callback pointer is NULL. A NULL callback
indicates the operation is not supported by the bus/driver,
not that permission is denied.
Return -EOPNOTSUPP instead of -EPERM when di->bus.write/
read_bulk/write_bulk is NULL.
Fixes: 14073f6614 ("power: supply: bq27xxx: Add bulk transfer bus methods")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Matt Ranostay <matt@ranostay.sg>
Link: https://patch.msgid.link/20251204083436.1367-1-vulab@iscas.ac.cn
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Some platforms expose reboot mode cells that are smaller than an
unsigned int, in which cases lead to write failures. Read the cell
first to determine actual size and only write the number of bytes the
cell can hold.
Fixes: 7a78a7f769 ("power: reset: nvmem-reboot-mode: use NVMEM as reboot mode write interface")
Signed-off-by: Alexander Koskovich <akoskovich@pm.me>
Link: https://patch.msgid.link/20251214191529.2470580-1-akoskovich@pm.me
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle. Keep the old behavior of
just printing a warning in case of any failures during the IRQ request
and finishing the probe successfully.
Fixes: d2cec82c28 ("power: sbs-battery: Request threaded irq and fix dev callback cookie")
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Reviewed-by: Phil Reid <preid@electromag.com.au>
Link: https://patch.msgid.link/0ef896e002495e615157b482d18a437af19ddcd0.1766268280.git.waqar.hameed@axis.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle.
Fixes: e86d69dd78 ("power_supply: Add support for Richtek RT9455 battery charger")
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://patch.msgid.link/1567d831e04c3e2fcb9e18dd36b7bcba4634581a.1766268280.git.waqar.hameed@axis.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle.
Fixes: f8d7a3d211 ("power: supply: Add driver for pm8916 lbc")
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Reviewed-by: Nikita Travkin <nikita@trvn.ru>
Link: https://patch.msgid.link/64d8dd3675a4e59fa32c3e0ef451f12d1f7ed18f.1766268280.git.waqar.hameed@axis.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle.
Fixes: 098bce1838 ("power: supply: Add pm8916 VM-BMS support")
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Reviewed-by: Nikita Travkin <nikita@trvn.ru>
Link: https://patch.msgid.link/2749c09ff81fcac87ae48147e216135450d8c067.1766268280.git.waqar.hameed@axis.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle.
Fixes: 4b6b6433a9 ("power: supply: pf1550: add battery charger support")
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Reviewed-by: Samuel Kayode <samkay014@gmail.com>
Link: https://patch.msgid.link/ae5a71b7e4dd2967d8fdcc531065cc71b17c86f5.1766268280.git.waqar.hameed@axis.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle.
Fixes: 84d7b76874 ("power: Add battery driver for goldfish emulator")
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://patch.msgid.link/500a606bb6fb6f2bb8d797e19a00cea9dd7b03c1.1766268280.git.waqar.hameed@axis.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle.
Fixes: 874b2adbed ("power: supply: cpcap-battery: Add a battery driver")
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://patch.msgid.link/81db58d610c9a51a68184f856cd431a934cccee2.1766268280.git.waqar.hameed@axis.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle.
Fixes: 5069185fc1 ("power: supply: bq25980: Add support for the BQ259xx family")
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://patch.msgid.link/8763035cadb959e14787b3837f2d3db61f6e1c34.1766268280.git.waqar.hameed@axis.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle.
Fixes: 32e4978bb9 ("power: supply: bq256xx: Introduce the BQ256XX charger driver")
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://patch.msgid.link/39da6da8cc060fa0382ca859f65071e791cb6119.1766268280.git.waqar.hameed@axis.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle.
Fixes: a09209acd6 ("power: supply: act8945a_charger: Add status change update support")
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://patch.msgid.link/bcf3a23b5187df0bba54a8c8fe09f8b8a0031dee.1766268280.git.waqar.hameed@axis.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Commit 1c1f13a006 ("power: supply: ab8500: Move to componentized
binding") introduced this issue during a refactorization. Fix this racy
use-after-free by making sure the IRQ is requested _after_ the
registration of the `power_supply` handle.
Fixes: 1c1f13a006 ("power: supply: ab8500: Move to componentized binding")
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/ccf83a09942cb8dda3dff70b2682f2c2e9cb97f2.1766268280.git.waqar.hameed@axis.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
OrangePi 6 Plus adopts CIX CD8180/CD8160 SoC, built-in 12-core 64-bit
processor + NPU processor,integrated graphics processor, equipped with
16GB/32GB/64GB LPDDR5, and provides two M.2 KEY-M interfaces 2280 for NVMe
SSD,as well as SPI FLASH and TF slots to meet the needs of fast read/write
and high-capacity storage
Signed-off-by: Gary Yang <gary.yang@cixtech.com>
Link: https://lore.kernel.org/r/20260110093406.2700505-3-gary.yang@cixtech.com
Signed-off-by: Peter Chen <peter.chen@cixtech.com>
OrangePi 6 Plus adopts CIX CD8180/CD8160 SoC, built-in 12-core 64-bit
processor + NPU processor,integrated graphics processor, equipped with
16GB/32GB/64GB LPDDR5, and provides two M.2 KEY-M interfaces 2280 for NVMe
SSD,as well as SPI FLASH and TF slots to meet the needs of fast read/write
and high-capacity storage
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Gary Yang <gary.yang@cixtech.com>
Link: https://lore.kernel.org/r/20260110093406.2700505-2-gary.yang@cixtech.com
Signed-off-by: Peter Chen <peter.chen@cixtech.com>
- A couple more fixes for the lib/crypto KUnit tests
- Fix missing MMU protection for the AES S-box
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaWP6dBQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK89sAQCLiV7LQdtHp7IJ21JhdrxPLSfhiUgp
HeSwwFylciRfggD+Ml19H/Pa3kJYbkQChL44AizlartCaiyLuiEfeTF3NQE=
=dYlq
-----END PGP SIGNATURE-----
Merge tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library fixes from Eric Biggers:
- A couple more fixes for the lib/crypto KUnit tests
- Fix missing MMU protection for the AES S-box
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: aes: Fix missing MMU protection for AES S-box
MAINTAINERS: add test vector generation scripts to "CRYPTO LIBRARY"
lib/crypto: tests: Fix syntax error for old python versions
lib/crypto: tests: polyval_kunit: Increase iterations for preparekey in IRQs
The debugfs_create_str() API assumes that the string pointer is either NULL
or points to valid kmalloc() memory. Leaving the pointer uninitialized can
cause problems.
Initialize src_node and dst_node to empty strings before creating the
debugfs entries to guarantee that reads and writes are safe.
Fixes: 770c69f037 ("interconnect: Add debugfs test client")
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Reviewed-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Tested-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Link: https://lore.kernel.org/r/20260109122523.125843-1-djakov@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Merge in fixes that went to 6.19 after for-7.0/block was branched.
Pending ublk changes depend on particularly the async scan work.
* block-6.19:
block: zero non-PI portion of auto integrity buffer
ublk: fix use-after-free in ublk_partition_scan_work
blk-mq: avoid stall during boot due to synchronize_rcu_expedited
loop: add missing bd_abort_claiming in loop_set_status
block: don't merge bios with different app_tags
blk-rq-qos: Remove unlikely() hints from QoS checks
loop: don't change loop device under exclusive opener in loop_set_status
block, bfq: update outdated comment
blk-mq: skip CPU offline notify on unmapped hctx
selftests/ublk: fix Makefile to rebuild on header changes
selftests/ublk: add test for async partition scan
ublk: scan partition in async way
block,bfq: fix aux stat accumulation destination
md: Fix forward incompatibility from configurable logical block size
md: Fix logical_block_size configuration being overwritten
md: suspend array while updating raid_disks via sysfs
md/raid5: fix possible null-pointer dereferences in raid5_store_group_thread_cnt()
md: Fix static checker warning in analyze_sbs
Add a blk_crypto_submit_bio helper that either submits the bio when
it is not encrypted or inline encryption is provided, but otherwise
handles the encryption before going down into the low-level driver.
This reduces the risk from bio reordering and keeps memory allocation
as high up in the stack as possible.
Note that if the submitter knows that inline enctryption is known to
be supported by the underyling driver, it can still use plain
submit_bio.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Avoid the relatively high overhead of constructing and walking per-page
segment bio_vecs for data unit alignment checking by merging the checks
into existing loops.
For hardware support crypto, perform the check in bio_split_io_at, which
already contains a similar alignment check applied for all I/O. This
means bio-based drivers that do not call bio_split_to_limits, should they
ever grow blk-crypto support, need to implement the check themselves,
just like all other queue limits checks.
For blk-crypto-fallback do it in the encryption/decryption loops. This
means alignment errors for decryption will only be detected after I/O
has completed, but that seems like a worthwhile trade off.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Calling mempool_alloc in a loop is not safe unless the maximum allocation
size times the maximum number of threads using it is less than the
minimum pool size. Use the new mempool_alloc_bulk helper to allocate
all missing elements in one pass to remove this deadlock risk. This
also means that non-pool allocations now use alloc_pages_bulk which can
be significantly faster than a loop over individual page allocations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Allocating a skcipher request dynamically can deadlock or cause
unexpected I/O failures when called from writeback context. Avoid the
allocation entirely by using on-stack skciphers, similar to what the
non-blk-crypto fscrypt path already does.
This drops the incomplete support for asynchronous algorithms, which
previously could be used, but only synchronously.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The current code in blk_crypto_fallback_encrypt_bio is inefficient and
prone to deadlocks under memory pressure: It first walks the passed in
plaintext bio to see how much of it can fit into a single encrypted
bio using up to BIO_MAX_VEC PAGE_SIZE segments, and then allocates a
plaintext clone that fits the size, only to allocate another bio for
the ciphertext later. While the plaintext clone uses a bioset to avoid
deadlocks when allocations could fail, the ciphertex one uses bio_kmalloc
which is a no-go in the file system I/O path.
Switch blk_crypto_fallback_encrypt_bio to walk the source plaintext bio
while consuming bi_iter without cloning it, and instead allocate a
ciphertext bio at the beginning and whenever we fille up the previous
one. The existing bio_set for the plaintext clones is reused for the
ciphertext bios to remove the deadlock risk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Restructure blk_crypto_fallback_bio_prep so that it always submits the
encrypted bio instead of passing it back to the caller, which allows
to simplify the calling conventions for blk_crypto_fallback_bio_prep and
blk_crypto_bio_prep so that they never have to return a bio, and can
use a true return value to indicate that the caller should submit the
bio, and false that the blk-crypto code consumed it.
The submission is handled by the on-stack bio list in the current
task_struct by the block layer and does not cause additional stack
usage or major overhead. It also prepares for the following optimization
and fixes for the blk-crypto fallback write path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This returns the bio_crypt_ctx if CONFIG_BLK_INLINE_ENCRYPTION is enabled
and a crypto context is attached to the bio, else NULL.
The use case is to allow safely dereferencing the context in common code
without needed #ifdef CONFIG_BLK_INLINE_ENCRYPTION.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This should slightly improve performance for large zeroing operations,
but more importantly prepares for blk-crypto refactoring that requires
all fscrypt users to call submit_bio directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
While the pblk argument to fscrypt_zeroout_range_inline_crypt is
declared as a sector_t it actually is interpreted as a logical block
size unit, which is highly unusual. Switch to passing the 512 byte
units that sector_t is defined for.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Here are some small char/misc driver fixes for some reported issues.
Included in here is:
- much reported rust_binder fix
- counter driver fixes
- new device ids for the mei driver
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaWOjpg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylCmACdEcuxjmhVP6Ye7ub22irLxy3h2qYAoJihKZuf
WlNQqB0z2fc/CvfO0xoQ
=/MYq
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc driver fixes for some reported issues.
Included in here is:
- much reported rust_binder fix
- counter driver fixes
- new device ids for the mei driver
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
rust_binder: remove spin_lock() in rust_shrink_free_page()
mei: me: add nova lake point S DID
counter: 104-quad-8: Fix incorrect return value in IRQ handler
counter: interrupt-cnt: Drop IRQF_NO_THREAD flag
of SEV noinstr methods, to further robustify the code.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmljfA8RHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1gvJA/7BrjOrhI5phRL40jwY9fhIXL0MElx+y+w
avMmcvz7W6PCL57sT77R9Ol8keCki2Ff5ynk4wrWAoUxGBA85iiU8/FoZC4BPaIy
wOcH/5DZV4z2Cvy21RChtN7A/dWTDyEt93B00BojgLgf6OgShS/ZiRJSRJasdGn2
S0GG4g58LYfidoDuAwIVgAyTgE/gVYRdeqZvUV/+Y6byNNac2r8EtEWLt5OCsUUe
LmF00yEE9/QN+oeJ3j2wT5sBAIgw7RbcIDMHJ12NYsJEc3SUZVDu9sBIzpoe1dfz
vPJFUC3XdV40aYWGyx7yx+sp3SmgTvcBzNGpN3BmrSn5ZvlF/sCn5xTZKsu9bKmu
MSzvjwfMSGIdSRGleeuVIr0R3t0asahHTmkqiUpOpLjhjvkxSdzJLK52BMQeOuLD
th1yB45it1HEUzYKoZBb3ZC1i/B+hhaWyEB8VECSt4CvsEbCFL3jfSDk++lJb5oX
dvskU30tNYuNVhkcv4vBJ3TPUy/0OZfbtOs8gMUm9m9lSO4X/ukQgWbN0V+amO/N
QJO8UmHT2euxYbv+DD91Fcnoom1I5Yfv3/OB+Ouqln4h3zvWx+gwvH0hIEPjGkB3
0x13ZHuHfiU/M/wjytwpEEgO9gC7Atu9LHhHITPu8v4YJ3sVvU4zMjDT0F9V2evR
a6Ejsc202Pg=
=GwVv
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2026-01-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
"Disable GCOV instrumentation in the SEV noinstr.c collection of SEV
noinstr methods, to further robustify the code"
* tag 'x86-urgent-2026-01-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Disable GCOV on noinstr object
To prepare for the introduction of namespaced exports for the IIO consumer
API, remove this include directive which isn't actually used by the driver.
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The dma_pool created by dma_pool_create() is not destroyed when
dma_async_device_register() or of_dma_controller_register() fails,
causing a resource leak in the probe error paths.
Add dma_pool_destroy() in both error paths to properly release the
allocated dma_pool resource.
Fixes: 7bedaa5537 ("dmaengine: add OMAP DMA engine driver")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20251103073018.643-1-vulab@iscas.ac.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fix a memory leak in gpi_peripheral_config() where the original memory
pointed to by gchan->config could be lost if krealloc() fails.
The issue occurs when:
1. gchan->config points to previously allocated memory
2. krealloc() fails and returns NULL
3. The function directly assigns NULL to gchan->config, losing the
reference to the original memory
4. The original memory becomes unreachable and cannot be freed
Fix this by using a temporary variable to hold the krealloc() result
and only updating gchan->config when the allocation succeeds.
Found via static analysis and code review.
Fixes: 5d0c3533a1 ("dmaengine: qcom: Add GPI dma driver")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://patch.msgid.link/20251029123421.91973-1-linmq006@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
- Fix an endianness bug in the gic-v5 irqchip driver
- Revert a broken commit from the riscv-imsic irqchip driver
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=qhAZ
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2026-01-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc irqchip fixes from Ingo Molnar:
- Fix an endianness bug in the gic-v5 irqchip driver
- Revert a broken commit from the riscv-imsic irqchip driver
* tag 'irq-urgent-2026-01-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "irqchip/riscv-imsic: Embed the vector array in lpriv"
irqchip/gic-v5: Fix gicv5_its_map_event() ITTE read endianness
In a vain attempt to consolidate the email zoo switch everything to the
kernel.org account.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
