The function bfa_lps_is_brcd_fabric() was eliminated, being a one-line
function, in commit f7f73812e9 ("[SCSI] bfa: clean up one line
functions"). Replace the call in the comment by its inlined
counterpart, referring to the parameter of the subsequent function.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://patch.msgid.link/20251231165027.142443-1-Julia.Lawall@inria.fr
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
As an active participant in the development of the mpt3sas driver, add
myself to the maintainers list.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://patch.msgid.link/20251223104721.16882-1-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit f46b9a595f ("scsi: ufs: core: Allocate the SCSI host earlier")
did not only cause scsi_add_host() to be called earlier. It also swapped
the order of link startup and enabling and configuring MCQ mode. Before
that commit, the call chains for link startup and enabling MCQ were as
follows:
ufshcd_init()
ufshcd_link_startup()
ufshcd_add_scsi_host()
ufshcd_mcq_enable()
Apparently this change causes link startup to fail. Fix this by configuring
MCQ after link startup has completed.
Reported-by: Nitin Rawat <nitin.rawat@oss.qualcomm.com>
Fixes: f46b9a595f ("scsi: ufs: core: Allocate the SCSI host earlier")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Link: https://patch.msgid.link/20251218230741.2661049-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some low-level drivers (LLD) access block layer crypto fields, such as
rq->crypt_keyslot and rq->crypt_ctx within `struct request`, to
configure hardware for inline encryption. However, SCSI Error Handling
(EH) commands (e.g., TEST UNIT READY, START STOP UNIT) should not
involve any encryption setup.
To prevent drivers from erroneously applying crypto settings during EH,
this patch saves the original values of rq->crypt_keyslot and
rq->crypt_ctx before an EH command is prepared via scsi_eh_prep_cmnd().
These fields in the 'struct request' are then set to NULL. The original
values are restored in scsi_eh_restore_cmnd() after the EH command
completes.
This ensures that the block layer crypto context does not leak into EH
command execution.
Signed-off-by: Brian Kao <powenkao@google.com>
Link: https://patch.msgid.link/20251218031726.2642834-1-powenkao@google.com
Cc: stable@vger.kernel.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The dm-verity kconfig options make the common mistake of selecting a
dependency from a bool "sub-option" rather than the main tristate
option. This unnecessarily forces the dependency to built-in ('y').
Fix this by moving the selections of REED_SOLOMON and REED_SOLOMON_DEC8
into DM_VERITY, conditional on DM_VERITY_FEC.
This allows REED_SOLOMON to be 'm' if DM_VERITY is 'm'.
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
If either of the calls to dm_bufio_client_create() in verity_fec_ctr()
fails, then dm_bufio_client_destroy() is later called with an ERR_PTR()
argument. That causes a crash. Fix this.
Fixes: a739ff3f54 ("dm verity: add support for forward error correction")
Cc: stable@vger.kernel.org
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
verity_fec_is_enabled() is very short and is called in quite a few
places, so make it an inline function.
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Since verity_fec_decode() has a !CONFIG_DM_VERITY_FEC stub, it can just
be called unconditionally, similar to the other calls in the same file.
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Make verity_finish_io() call verity_fec_finish_io() unconditionally,
instead of skipping it when 'in_bh' is true.
Although FEC can't have been done when 'in_bh' is true,
verity_fec_finish_io() is a no-op when FEC wasn't done. An earlier
change also made verity_fec_finish_io() very lightweight when FEC wasn't
done. So it should just be called unconditionally.
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
When correcting a data block, the FEC code performs optimally when it
has enough buffers to hold all the needed RS blocks. That number of
buffers is '1 << (v->data_dev_block_bits - DM_VERITY_FEC_BUF_RS_BITS)'.
However, since v->data_dev_block_bits isn't a compile-time constant, the
code actually used PAGE_SHIFT instead.
With the traditional PAGE_SIZE == data_block_size == 4096, this was
fine. However, when PAGE_SIZE > data_block_size, this wastes space.
E.g., with data_block_size == 4096 && PAGE_SIZE == 16384, struct
dm_verity_fec_io is 9240 bytes, when in fact only 3096 bytes are needed.
Fix this by making dm_verity_fec_io::bufs a variable-length array.
This makes the macros DM_VERITY_FEC_BUF_MAX and
fec_for_each_extra_buffer() no longer apply, so remove them. For
consistency, and because DM_VERITY_FEC_BUF_PREALLOC is fixed at 1 and
was already assumed to be 1 (considering that mempool_alloc() shouldn't
be called in a loop), also remove the related macros
DM_VERITY_FEC_BUF_PREALLOC and fec_for_each_prealloc_buffer().
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Currently, struct dm_verity_fec_io is allocated in the front padding of
struct bio using dm_target::per_io_data_size. Unfortunately, struct
dm_verity_fec_io is very large: 3096 bytes when CONFIG_64BIT=y &&
PAGE_SIZE == 4096, or 9240 bytes when CONFIG_64BIT=y && PAGE_SIZE ==
16384. This makes the bio size very large.
Moreover, most of dm_verity_fec_io gets iterated over up to three times,
even on I/O requests that don't require any error correction:
1. To zero the memory on allocation, if init_on_alloc=1. (This happens
when the bio is allocated, not in dm-verity itself.)
2. To zero the buffers array in verity_fec_init_io().
3. To free the buffers in verity_fec_finish_io().
Fix all of these inefficiencies by moving dm_verity_fec_io to a mempool.
Replace the embedded dm_verity_fec_io with a pointer
dm_verity_io::fec_io. verity_fec_init_io() initializes it to NULL,
verity_fec_decode() allocates it on the first call, and
verity_fec_finish_io() cleans it up. The normal case is that the
pointer simply stays NULL, so the overhead becomes negligible.
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
The clone target already exposes both source and destination devices via
clone_iterate_devices(), so dm-table's device_area_is_invalid() helper
ensures that the mapping does not extend past either underlying block
device.
The manual comparisons between ti->len and the source/destination device
sizes in parse_source_dev() and parse_dest_dev() are therefore
redundant. Remove these checks and rely on the core validation instead.
This changes the error strings reported when the devices are too small,
but preserves the failure behaviour.
Signed-off-by: Li Chen <me@linux.beauty>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
The cache target already exposes the origin device through
cache_iterate_devices(), which allows dm-table to call
device_area_is_invalid() and verify that the mapping fits inside the
underlying block device.
The explicit ti->len > origin_sectors test in parse_origin_dev() is
therefore redundant. Drop this check and rely on the core device
validation instead. This changes the user-visible error string when the
origin is too small, but preserves the failure behaviour.
Signed-off-by: Li Chen <me@linux.beauty>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
-----BEGIN PGP SIGNATURE-----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=g2yW
-----END PGP SIGNATURE-----
Merge tag 'nf-26-01-02' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter: updates for net
The following patchset contains Netfilter fixes for *net*:
1) Fix overlap detection for nf_tables with concatenated ranges.
There are cases where element could not be added due to a conflict
with existing range, while kernel reports success to userspace.
2) update selftest to cover this bug.
3) synproxy update path should use READ/WRITE once as we replace
config struct while packet path might read it in parallel.
This relies on said config struct to fit sizeof(long).
From Fernando Fernandez Mancera.
4) Don't return -EEXIST from xtables in module load path, a pending
patch to module infra will spot a warning if this happens.
From Daniel Gomez.
5) Fix a memory leak in nf_tables when chain hits 2**32 users
and rule is to be hw-offloaded, from Zilin Guan.
6) Avoid infinite list growth when insert rate is high in nf_conncount,
also from Fernando.
* tag 'nf-26-01-02' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_conncount: update last_gc only when GC has been performed
netfilter: nf_tables: fix memory leak in nf_tables_newrule()
netfilter: replace -EEXIST with -EBUSY
netfilter: nft_synproxy: avoid possible data-race on update operation
selftests: netfilter: nft_concat_range.sh: add check for overlap detection bug
netfilter: nft_set_pipapo: fix range overlap detection
====================
Link: https://patch.msgid.link/20260102114128.7007-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub added a warning in nf_conntrack_cleanup_net_list() to make debugging
leaked skbs/conntrack references more obvious.
syzbot reports this as triggering, and I can also reproduce this via
ip_defrag.sh selftest:
conntrack cleanup blocked for 60s
WARNING: net/netfilter/nf_conntrack_core.c:2512
[..]
conntrack clenups gets stuck because there are skbs with still hold nf_conn
references via their frag_list.
net.core.skb_defer_max=0 makes the hang disappear.
Eric Dumazet points out that skb_release_head_state() doesn't follow the
fraglist.
ip_defrag.sh can only reproduce this problem since
commit 6471658dc6 ("udp: use skb_attempt_defer_free()"), but AFAICS this
problem could happen with TCP as well if pmtu discovery is off.
The relevant problem path for udp is:
1. netns emits fragmented packets
2. nf_defrag_v6_hook reassembles them (in output hook)
3. reassembled skb is tracked (skb owns nf_conn reference)
4. ip6_output refragments
5. refragmented packets also own nf_conn reference (ip6_fragment
calls ip6_copy_metadata())
6. on input path, nf_defrag_v6_hook skips defragmentation: the
fragments already have skb->nf_conn attached
7. skbs are reassembled via ipv6_frag_rcv()
8. skb_consume_udp -> skb_attempt_defer_free() -> skb ends up
in pcpu freelist, but still has nf_conn reference.
Possible solutions:
1 let defrag engine drop nf_conn entry, OR
2 export kick_defer_list_purge() and call it from the conntrack
netns exit callback, OR
3 add skb_has_frag_list() check to skb_attempt_defer_free()
2 & 3 also solve ip_defrag.sh hang but share same drawback:
Such reassembled skbs, queued to socket, can prevent conntrack module
removal until userspace has consumed the packet. While both tcp and udp
stack do call nf_reset_ct() before placing skb on socket queue, that
function doesn't iterate frag_list skbs.
Therefore drop nf_conn entries when they are placed in defrag queue.
Keep the nf_conn entry of the first (offset 0) skb so that reassembled
skb retains nf_conn entry for sake of TX path.
Note that fixes tag is incorrect; it points to the commit introducing the
'ip_defrag.sh reproducible problem': no need to backport this patch to
every stable kernel.
Reported-by: syzbot+4393c47753b7808dac7d@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/693b0fa7.050a0220.4004e.040d.GAE@google.com/
Fixes: 6471658dc6 ("udp: use skb_attempt_defer_free()")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260102140030.32367-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix the max number of bits passed to find_first_zero_bit() in
bnxt_alloc_agg_idx(). We were incorrectly passing the number of
long words. find_first_zero_bit() may fail to find a zero bit and
cause a wrong ID to be used. If the wrong ID is already in use, this
can cause data corruption. Sometimes an error like this can also be
seen:
bnxt_en 0000:83:00.0 enp131s0np0: TPA end agg_buf 2 != expected agg_bufs 1
Fix it by passing the correct number of bits MAX_TPA_P5. Use
DECLARE_BITMAP() to more cleanly define the bitmap. Add a sanity
check to warn if a bit cannot be found and reset the ring [MChan].
Fixes: ec4d8e7cf0 ("bnxt_en: Add TPA ID mapping logic for 57500 chips.")
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Srijit Bose <srijit.bose@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20251231083625.3911652-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 1f52d7b622 ("net: wwan: iosm: Enable M.2 7360 WWAN card support")
allocated memory for pp_qlt in ipc_mux_init() but did not free it in
ipc_mux_deinit(). This results in a memory leak when the driver is
unloaded.
Free the allocated memory in ipc_mux_deinit() to fix the leak.
Fixes: 1f52d7b622 ("net: wwan: iosm: Enable M.2 7360 WWAN card support")
Co-developed-by: Jianhao Xu <jianhao.xu@seu.edu.cn>
Signed-off-by: Jianhao Xu <jianhao.xu@seu.edu.cn>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://patch.msgid.link/20251230071853.1062223-1-zilin@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mark Bloch says:
====================
mlx5 misc fixes 2025-12-25
This patchset provides misc bug fixes from the team to the mlx5 core and
Eth drivers.
====================
Link: https://patch.msgid.link/20251225132717.358820-1-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The commit which added RX steering rules for PSP forgot to free a modify
header HW object on the cleanup path, which lead to health errors when
reloading the driver and uninitializing the device:
mlx5_core 0000:08:00.0: poll_health:803:(pid 3021): Fatal error 3 detected
Fix that by saving the modify header pointer in the PSP steering struct
and deallocating it after freeing the rule which references it.
Fixes: 9536fbe10c ("net/mlx5e: Add PSP steering in local NIC RX")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20251225132717.358820-6-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dumping module EEPROM on newer modules is supported through the netlink
interface only.
Querying with old userspace ethtool (or other tools, such as 'lshw')
which still uses the ioctl interface results in an error message that
could flood dmesg (in addition to the expected error return value).
The original message was added under the assumption that the driver
should be able to handle all module types, but now that such flows are
easily triggered from userspace, it doesn't serve its purpose.
Change the log level of the print in mlx5_query_module_eeprom() to
debug.
Fixes: bb64143eee ("net/mlx5e: Add ethtool support for dump module EEPROM")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20251225132717.358820-5-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The mlx5_query_mcia() function unconditionally dereferences the status
pointer to store the MCIA register status value.
However, mlx5e_get_module_id() passes NULL since it doesn't need the
status value.
Add a NULL check before dereferencing the status pointer to prevent a
NULL pointer dereference.
Fixes: 2e4c44b12f ("net/mlx5: Refactor EEPROM query error handling to return status separately")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20251225132717.358820-4-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the ppcnt_statistical_group capability check
incorrectly gates access to FEC histogram statistics.
This capability applies only to statistical and physical
counter groups, not for histogram data.
Restrict the ppcnt_statistical_group check to the
Physical_Layer_Counters and Physical_Layer_Statistical_Counters
groups.
Histogram statistics access remains gated by the pphcr
capability.
The issue is harmless as of today, as it happens that
ppcnt_statistical_group is set on all existing devices that
have pphcr set.
Fixes: 6b81b8a0b1 ("net/mlx5e: Don't query FEC statistics when FEC is disabled")
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20251225132717.358820-3-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Today multipath offload is controlled by a single route and the route
controlling is selected if it meets one of the following criteria:
1. No controlling route is set.
2. New route destination is the same as old one.
3. New route metric is lower than old route metric.
This can cause unwanted behaviour in case a new route is added
with a smaller network prefix which should get the priority.
Fix this by adding a new criteria to give priority to new route with
a smaller network prefix.
Fixes: ad11c4f1d8 ("net/mlx5e: Lag, Only handle events from highest priority multipath entry")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20251225132717.358820-2-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Directly increment the TSO features incurs a side effect: it will also
directly clear the flags in NETIF_F_ALL_FOR_ALL on the master device,
which can cause issues such as the inability to enable the nocache copy
feature on the bonding driver.
The fix is to include NETIF_F_ALL_FOR_ALL in the update mask, thereby
preventing it from being cleared.
Fixes: b0ce3508b2 ("bonding: allow TSO being set on bonding master")
Signed-off-by: Di Zhu <zhud@hygon.cn>
Link: https://patch.msgid.link/20251224012224.56185-1-zhud@hygon.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement soft_reset, suspend, and resume callbacks using
genphy_soft_reset(), genphy_suspend(), and genphy_resume()
to fix PHY initialization and power management issues.
The soft_reset callback is needed to properly recover the PHY after an
ifconfig down/up cycle. Without it, the PHY can remain in power-down
state, causing MDIO register access failures during config_init().
The soft reset ensures the PHY is operational before configuration.
The suspend/resume callbacks enable proper power management during
system suspend/resume cycles.
Fixes: b2908a989c ("net: phy: add driver for MaxLinear MxL86110 PHY")
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Link: https://patch.msgid.link/20251223120940.407195-1-stefano.r@variscite.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the ping program uses an IPPROTO_ICMP socket to send ICMP_ECHO
messages, ICMP_MIB_OUTMSGS is counted twice.
ping_v4_sendmsg
ping_v4_push_pending_frames
ip_push_pending_frames
ip_finish_skb
__ip_make_skb
icmp_out_count(net, icmp_type); // first count
icmp_out_count(sock_net(sk), user_icmph.type); // second count
However, when the ping program uses an IPPROTO_RAW socket,
ICMP_MIB_OUTMSGS is counted correctly only once.
Therefore, the first count should be removed.
Fixes: c319b4d76b ("net: ipv4: add IPPROTO_ICMP socket kind")
Signed-off-by: yuan.gao <yuan.gao@ucloud.cn>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20251224063145.3615282-1-yuan.gao@ucloud.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 15faa1f67a ("lan966x: Fix crash when adding interface under a lag")
fixed a similar issue in the lan966x driver caused by a NULL pointer dereference.
The ocelot_set_aggr_pgids() function in the ocelot driver has similar logic
and is susceptible to the same crash.
This issue specifically affects the ocelot_vsc7514.c frontend, which leaves
unused ports as NULL pointers. The felix_vsc9959.c frontend is unaffected as
it uses the DSA framework which registers all ports.
Fix this by checking if the port pointer is valid before accessing it.
Fixes: 528d3f190c ("net: mscc: ocelot: drop the use of the "lags" array")
Signed-off-by: Jerry Wu <w.7erry@foxmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/tencent_75EF812B305E26B0869C673DD1160866C90A@qq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When using an 802.1ad bridge with vlan_tunnel, the C-VLAN tag is
incorrectly stripped from frames during egress processing.
br_handle_egress_vlan_tunnel() uses skb_vlan_pop() to remove the S-VLAN
from hwaccel before VXLAN encapsulation. However, skb_vlan_pop() also
moves any "next" VLAN from the payload into hwaccel:
/* move next vlan tag to hw accel tag */
__skb_vlan_pop(skb, &vlan_tci);
__vlan_hwaccel_put_tag(skb, vlan_proto, vlan_tci);
For QinQ frames where the C-VLAN sits in the payload, this moves it to
hwaccel where it gets lost during VXLAN encapsulation.
Fix by calling __vlan_hwaccel_clear_tag() directly, which clears only
the hwaccel S-VLAN and leaves the payload untouched.
This path is only taken when vlan_tunnel is enabled and tunnel_info
is configured, so 802.1Q bridges are unaffected.
Tested with 802.1ad bridge + VXLAN vlan_tunnel, verified C-VLAN
preserved in VXLAN payload via tcpdump.
Fixes: 11538d039a ("bridge: vlan dst_metadata hooks in ingress and egress paths")
Signed-off-by: Alexandre Knecht <knecht.alexandre@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20251228020057.2788865-1-knecht.alexandre@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The build can currently fail with
ld: drivers/net/ethernet/broadcom/bnge/bnge_auxr.o: in function `bnge_rdma_aux_device_add':
bnge_auxr.c:(.text+0x366): undefined reference to `__auxiliary_device_add'
ld: drivers/net/ethernet/broadcom/bnge/bnge_auxr.o: in function `bnge_rdma_aux_device_init':
bnge_auxr.c:(.text+0x43c): undefined reference to `auxiliary_device_init'
if BNGE is enabled but no other driver pulls in AUXILIARY_BUS.
Select AUXILIARY_BUS in BNGE like in all other drivers which create
an auxiliary_device.
Fixes: 8ac050ec3b ("bng_en: Add RoCE aux device support")
Signed-off-by: Markus Blöchl <markus@blochl.de>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Link: https://patch.msgid.link/20251228-bnge_aux_bus-v1-1-82e273ebfdac@blochl.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
devlink_alloc() may return NULL on allocation failure, but
prestera_devlink_alloc() unconditionally calls devlink_priv() on
the returned pointer.
This leads to a NULL pointer dereference if devlink allocation fails.
Add a check for a NULL devlink pointer and return NULL early to avoid
the crash.
Fixes: 34dd1710f5 ("net: marvell: prestera: Add basic devlink support")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Acked-by: Elad Nachman <enachman@marvell.com>
Link: https://patch.msgid.link/20251230052124.897012-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During a reset, software-generated WCs cannot be reported via
interrupts. This may cause the ULP to miss some WCs.
To avoid this, add check in the CQ arm process: if a hardware reset
has occurred and there are still unreported soft-WCs, notify the ULP
to handle the remaining WCs, thereby preventing any loss of completions.
Fixes: 626903e935 ("RDMA/hns: Add support for reporting wc as software mode")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20260104064057.1582216-5-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
DSCP is not supported in RoCEv1, but get_dscp() is still called. If
get_dscp() returns an error, it'll eventually cause create_ah to fail
even when using RoCEv1.
Correct the return value and avoid calling get_dscp() when using
RoCEv1.
Fixes: ee20cc17e9 ("RDMA/hns: Support DSCP")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20260104064057.1582216-4-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
query_cqc() and query_mpt() may return various error codes in
different cases. Return actual error code instead of fixed EINVAL.
Fixes: f2b070f36d ("RDMA/hns: Support CQ's restrack raw ops for hns driver")
Fixes: 3d67e7e236 ("RDMA/hns: Support MR's restrack raw ops for hns driver")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20260104064057.1582216-3-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
When sunrpc is used, if a reset triggered, our wq may lead the
following trace:
workqueue: WQ_MEM_RECLAIM xprtiod:xprt_rdma_connect_worker [rpcrdma]
is flushing !WQ_MEM_RECLAIM hns_roce_irq_workq:flush_work_handle
[hns_roce_hw_v2]
WARNING: CPU: 0 PID: 8250 at kernel/workqueue.c:2644 check_flush_dependency+0xe0/0x144
Call trace:
check_flush_dependency+0xe0/0x144
start_flush_work.constprop.0+0x1d0/0x2f0
__flush_work.isra.0+0x40/0xb0
flush_work+0x14/0x30
hns_roce_v2_destroy_qp+0xac/0x1e0 [hns_roce_hw_v2]
ib_destroy_qp_user+0x9c/0x2b4
rdma_destroy_qp+0x34/0xb0
rpcrdma_ep_destroy+0x28/0xcc [rpcrdma]
rpcrdma_ep_put+0x74/0xb4 [rpcrdma]
rpcrdma_xprt_disconnect+0x1d8/0x260 [rpcrdma]
xprt_rdma_connect_worker+0xc0/0x120 [rpcrdma]
process_one_work+0x1cc/0x4d0
worker_thread+0x154/0x414
kthread+0x104/0x144
ret_from_fork+0x10/0x18
Since QP destruction frees memory, this wq should have the WQ_MEM_RECLAIM.
Fixes: ffd541d457 ("RDMA/hns: Add the workqueue framework for flush cqe handler")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20260104064057.1582216-2-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Some HCAs (e.g: ConnectX4) do not trigger a IB_EVENT_GID_CHANGE on
subnet prefix update from SM (PortInfo).
Since the commit d58c23c925 ("IB/core: Only update PKEY and GID caches
on respective events"), the GID cache is updated exclusively on
IB_EVENT_GID_CHANGE. If this event is not emitted, the subnet prefix in the
IPoIB interface’s hardware address remains set to its default value
(0xfe80000000000000).
Then rdma_bind_addr() failed because it relies on hardware address to
find the port GID (subnet_prefix + port GUID).
This patch fixes this issue by updating the GID cache on
IB_EVENT_CLIENT_REREGISTER event (emitted on PortInfo::ClientReregister=1).
Fixes: d58c23c925 ("IB/core: Only update PKEY and GID caches on respective events")
Signed-off-by: Etienne AUJAMES <eaujames@ddn.com>
Link: https://patch.msgid.link/aVUfsO58QIDn5bGX@eaujamesFR0130
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
sld_state_show() has a dead str1 below:
if (A) {
...
} else if (B) {
pr_info(... A ? str1 : str2 ...);
}
where A is always false in the second block, implied by the "if (A) else"
pattern. Hence, str2 is always used.
This seems to be some mysterious legacy inherited from the earlier patch
revisions of
ebb1064e7c ("x86/traps: Handle #DB for bus lock").
Earlier revisions¹ did enable both sld and bld at the same time to detect
non-WB bus_locks when split_lock_detect=fatal, but that's no longer true in
the merged revision.
Remove it and translate the pr_info() into its equivalent form.
¹ https://lore.kernel.org/r/20201121023624.3604415-3-fenghua.yu@intel.com
[ bp: Massage commit message; simplify braces ]
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20251215182907.152881-1-i@rong.moe
The drm_info() function requires the drm/drm_print.h header to be included
first:
In file included from drivers/gpu/drm/pl111/pl111_nomadik.c:7:
drivers/gpu/drm/pl111/pl111_nomadik.h:11:32: error: 'struct drm_device' declared inside parameter list will not be visible outside of this definition or declaration [-Werror]
11 | void pl111_nomadik_init(struct drm_device *dev);
| ^~~~~~~~~~
drivers/gpu/drm/pl111/pl111_nomadik.c: In function 'pl111_nomadik_init':
drivers/gpu/drm/pl111/pl111_nomadik.c:34:9: error: implicit declaration of function 'drm_info'; did you mean 'pr_info'? [-Wimplicit-function-declaration]
34 | drm_info(dev, "set Nomadik PMU mux to CLCD mode\n");
| ^~~~~~~~
| pr_info
Fixes: a1542b8ca6 ("drm: pl111: replace dev_* print functions with drm_* variants")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Eslam Khafagy <eslam.medhat1993@gmail.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20251223214915.503913-1-arnd@kernel.org
Up until now, all monitoring events were associated with the L3 resource and it
made sense to use the L3 specific "struct rdt_mon_domain *" argument to functions
operating on domains.
Telemetry events will be tied to a new resource with its instances represented
by a new domain structure that, just like struct rdt_mon_domain, starts with
the generic struct rdt_domain_hdr.
Prepare to support domains belonging to different resources by changing the
calling convention of functions operating on domains. Pass the generic header
and use that to find the domain specific structure where needed.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
* rcu-torture.20260104a:
rcutorture: Add --kill-previous option to terminate previous kvm.sh runs
rcutorture: Prevent concurrent kvm.sh runs on same source tree
torture: Include commit discription in testid.txt
torture: Make config2csv.sh properly handle comments in .boot files
torture: Make kvm-series.sh give run numbers and totals
torture: Make kvm-series.sh give build numbers and totals
torture: Parallelize kvm-series.sh guest-OS execution
rcutorture: Add context checks to rcu_torture_timer()
* rcu-tasks-trace.20260101a:
rcutorture: Test rcu_tasks_trace_expedite_current()
srcu: Create an rcu_tasks_trace_expedite_current() function
checkpatch: Deprecate rcu_read_{,un}lock_trace()
rcu: Update Requirements.rst for RCU Tasks Trace
rcu: Add noinstr-fast rcu_read_{,un}lock_tasks_trace() APIs
rcu: Move rcu_tasks_trace_srcu_struct out of #ifdef CONFIG_TASKS_RCU_GENERIC
rcu: Clean up after the SRCU-fastification of RCU Tasks Trace
context_tracking: Remove rcu_task_trace_heavyweight_{enter,exit}()
rcu: Re-implement RCU Tasks Trace in terms of SRCU-fast
When kvm.sh is killed, its child processes (make, gcc, qemu, etc.) may
continue running. This prevents new kvm.sh instances from starting even
though the parent is gone.
Add a --kill-previous option that uses fuser(1) to terminate all
processes holding the flock file before attempting to acquire it. This
provides a clean way to recover from stale/zombie kvm.sh runs which
sometimes may have lots of qemu and compiler processes still disturbing.
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Add flock-based locking to kvm.sh to prevent multiple instances from
running concurrently on the same source tree. This prevents build
failures caused by one instance's "make clean" deleting generated files
while another instance is building causing build failures.
The lock file is placed in the rcutorture directory and added to
.gitignore.
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
