Rename the variable u1bTmp to val to remove Hungarian notation. This
improves readability and aligns the code with kernel naming standards.
Signed-off-by: Luka Gejak <lukagejak5@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/20260130185658.207785-3-lukagejak5@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver maintains a private `struct debug_priv` embedded within
`struct dvobj_priv` to track various error counters (e.g., suspend
errors, alloc failures, RX drops).
These counters are incremented in various files but the data is
never read or exposed to userspace.
Remove the unused `debug_priv` structure definition, the instance
in `dvobj_priv`, and all associated increment operations across
the driver to clean up the code.
This also removes the following helper functions which were used
solely to update these counters:
- rtw_reset_rx_info()
- recv_indicatepkts_pkt_loss_cnt()
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/20260131212128.25548-1-ethantidmore06@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The rtl8723b_start_thread() and rtl8723b_stop_thread() functions are
wrappers that are only called from one place each. Remove these wrapper
functions and inline the thread handling directly in
rtw_start_drv_threads() and rtw_stop_drv_threads().
This also fixes a bug where kthread_run() was not checked for errors
using IS_ERR(). kthread_run() returns ERR_PTR(-ENOMEM) on failure, not
NULL. Without this check, the SdioXmitThread pointer could contain an
error value, causing issues when rtw_stop_drv_threads() later attempts
to use it.
The inlined code now follows the same pattern as xmitThread and
cmdThread in rtw_start_drv_threads(), with proper IS_ERR() checking.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com>
Link: https://patch.msgid.link/20260130001641.17941-4-samasth.norway.ananda@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After successfully calling request_firmware(), if the firmware size
check fails or if kmemdup() fails, the code jumps to the exit label
without calling release_firmware(), causing a memory leak. Call
release_firmware() directly in each error path before jumping to cleanup
label.
Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/20260130001641.17941-2-samasth.norway.ananda@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The check on status can be removed because all previous
assignments on status are followed by a goto statement that
bypasses the status check. This minor issue was detected with
Coverity Scan static analysis. Remove the redundant check and
some empty lines.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20260129161058.197372-1-colin.i.king@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The kernel coding style for comments requires a single space after the
"/*". Currently, many files in HAL contain two spaces after the "/*", or
use irregular indentation. The modified files also suffer from this.
Fix line comment style inconsistencies by removing additional space after
"/*" to adhere to kernel coding standards.
Signed-off-by: Mahad Ibrahim <mahad.ibrahim.dev@gmail.com>
Link: https://patch.msgid.link/20260129160426.13737-6-mahad.ibrahim.dev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch.pl check regarding:
- Line length of X exceeds 100 columns
Redistribute comments to multiple lines to adhere to kernel coding
standards.
Signed-off-by: Mahad Ibrahim <mahad.ibrahim.dev@gmail.com>
Link: https://patch.msgid.link/20260129160426.13737-5-mahad.ibrahim.dev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch.pl warning regarding:
- Missing a blank line after declarations
Adhere to kernel coding standards by adding a blank line after variable
declaration.
Signed-off-by: Mahad Ibrahim <mahad.ibrahim.dev@gmail.com>
Link: https://patch.msgid.link/20260129160426.13737-4-mahad.ibrahim.dev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch.pl check regarding:
- Lines should not end with a '('
Collapse the multi-line function signature of CheckPositive() into a
single line to adhere to kernel coding standards.
Signed-off-by: Mahad Ibrahim <mahad.ibrahim.dev@gmail.com>
Link: https://patch.msgid.link/20260129160426.13737-2-mahad.ibrahim.dev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a pattern in the loops where the lock is dropped
to call a specific function and then re-acquired.
The list can be exposed during this short gap, creating a potential
race condition. This patch fixes the problem by replacing the list
head with a local free list using list_replace_init(), instead of
using the lock/unlock pattern in the loop.
Signed-off-by: Minu Jin <s9430939@naver.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/20260205021620.1165137-1-s9430939@naver.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This array is never modified. Add a second const to make the array
itself be placed in read-only .rodata instead of just the strings it
points to.
Fix a WARNING issued by scripts/checkpatch.pl.
Signed-off-by: Tanjim Kamal <tanjimkamal1@gmail.com>
Reviewed-by: Ethan Tidmore <ethantidmore06@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/20260128113900.44852-1-tanjimkamal1@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clean up the function by changing 'uint' to 'unsigned int' to comply
with the kernel coding style, as suggested by Andy Shevchenko.
Signed-off-by: Minu Jin <s9430939@naver.com>
Link: https://patch.msgid.link/20260127153811.1592900-3-s9430939@naver.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function _rtw_pktfile_read() currently returns a uint and clamps
the requested read length if it exceeds the remaining data. This
behavior makes it impossible to propagate error codes from internal
calls like skb_copy_bits() and leads to incomplete data processing.
This patch updates the function to:
1. Return -EINVAL if the remaining data is less than the requested length,
ensuring callers always get the full amount of data they expect.
2. Propagate the negative error code from skb_copy_bits().
3. Change the return type from uint to int to support these error codes.
To avoid breaking git bisect, this patch also updates all call sites
(set_qos, update_attrib, and rtw_xmitframe_coalesce) in the same commit.
By doing so, the error-producing function and its error-handling callers
remain in sync, preventing runtime failures at this commit point.
Signed-off-by: Minu Jin <s9430939@naver.com>
Link: https://patch.msgid.link/20260127153811.1592900-2-s9430939@naver.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For NXP NCI devices (e.g. PN7150), the interrupt is level-triggered and
active high, not edge-triggered.
Using IRQF_TRIGGER_RISING in the driver can cause interrupts to fail
to trigger correctly.
Remove IRQF_TRIGGER_RISING and rely on the IRQ trigger type configured
via Device Tree.
Signed-off-by: Carl Lee <carl.lee@amd.com>
Link: https://patch.msgid.link/20260205-fc-nxp-nci-remove-interrupt-trigger-type-v2-1-79d2ed4a7e42@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In hns3_set_ringparam(), a temporary copy (tmp_rings) of the ring structure
is created for rollback. However, the tx_spare pointer in the original
ring handle is incorrectly left pointing to the old backup memory.
Later, if memory allocation fails in hns3_init_all_ring() during the setup,
the error path attempts to free all newly allocated rings. Since tx_spare
contains a stale (non-NULL) pointer from the backup, it is mistaken for
a newly allocated buffer and is erroneously freed, leading to a double-free
of the backup memory.
The root cause is that the tx_spare field was not cleared after its value
was saved in tmp_rings, leaving a dangling pointer.
Fix this by setting tx_spare to NULL in the original ring structure
when the creation of the new `tx_spare` fails. This ensures the
error cleanup path only frees genuinely newly allocated buffers.
Fixes: 907676b130 ("net: hns3: use tx bounce buffer for small packets")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260205121719.3285730-1-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alice Mikityanska says:
====================
BIG TCP without HBH in IPv6
Resubmitting after the grace period.
This series is part 1 of "BIG TCP for UDP tunnels". Due to the number of
patches, I'm splitting it into two logical parts:
* Remove hop-by-hop header for BIG TCP IPv6 to align with BIG TCP IPv4.
* Fix up things that prevent BIG TCP from working with UDP tunnels.
The current BIG TCP IPv6 code inserts a hop-by-hop extension header with
32-bit length of the packet. When the packet is encapsulated, and either
the outer or the inner protocol is IPv6, or both are IPv6, there will be
1 or 2 HBH headers that need to be dealt with. The issues that arise:
1. The drivers don't strip it, and they'd all need to know the structure
of each tunnel protocol in order to strip it correctly, also taking into
account all combinations of IPv4/IPv6 inner/outer protocols.
2. Even if (1) is implemented, it would be an additional performance
penalty per aggregated packet.
3. The skb_gso_validate_network_len check is skipped in
ip6_finish_output_gso when IP6SKB_FAKEJUMBO is set, but it seems that it
would make sense to do the actual validation, just taking into account
the length of the HBH header. When the support for tunnels is added, it
becomes trickier, because there may be one or two HBH headers, depending
on whether it's IPv6 in IPv6 or not.
At the same time, having an HBH header to store the 32-bit length is not
strictly necessary, as BIG TCP IPv4 doesn't do anything like this and
just restores the length from skb->len. The same thing can be done for
BIG TCP IPv6. Removing HBH from BIG TCP would allow to simplify the
implementation significantly, and align it with BIG TCP IPv4, which has
been a long-standing goal.
====================
Link: https://patch.msgid.link/20260205133925.526371-1-alice.kernel@fastmail.im
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the HBH jumbo helpers are not used by any driver or GSO, remove
them altogether.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260205133925.526371-13-alice.kernel@fastmail.im
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the kernel doesn't insert HBH for BIG TCP IPv6 packets, remove
unnecessary steps from the bng_en TX path, that used to check and
remove HBH.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Link: https://patch.msgid.link/20260205133925.526371-12-alice.kernel@fastmail.im
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the kernel doesn't insert HBH for BIG TCP IPv6 packets, remove
unnecessary steps from the mana TX path, that used to check and remove
HBH.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260205133925.526371-11-alice.kernel@fastmail.im
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the kernel doesn't insert HBH for BIG TCP IPv6 packets, remove
unnecessary steps from the gve TX path, that used to check and remove
HBH.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260205133925.526371-10-alice.kernel@fastmail.im
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the kernel doesn't insert HBH for BIG TCP IPv6 packets, remove
unnecessary steps from the bnxt_en TX path, that used to check and
remove HBH.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260205133925.526371-9-alice.kernel@fastmail.im
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the kernel doesn't insert HBH for BIG TCP IPv6 packets, remove
unnecessary steps from the ice TX path, that used to check and remove
HBH.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260205133925.526371-8-alice.kernel@fastmail.im
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the kernel doesn't insert HBH for BIG TCP IPv6 packets, remove
unnecessary steps from the mlx4 TX path, that used to check and remove
HBH.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260205133925.526371-7-alice.kernel@fastmail.im
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the kernel doesn't insert HBH for BIG TCP IPv6 packets, remove
unnecessary steps from the mlx5e and mlx5i TX path, that used to check
and remove HBH.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260205133925.526371-6-alice.kernel@fastmail.im
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the kernel doesn't insert HBH for BIG TCP IPv6 packets, remove
unnecessary steps from the GSO TX path, that used to check and remove
HBH.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260205133925.526371-5-alice.kernel@fastmail.im
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Complementary to the previous commit, stop inserting HBH when building
BIG TCP GRO SKBs.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260205133925.526371-4-alice.kernel@fastmail.im
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
BIG TCP IPv6 inserts a hop-by-hop extension header to indicate the real
IPv6 payload length when it doesn't fit into the 16-bit field in the
IPv6 header itself. While it helps tools parse the packet, it also
requires every driver that supports TSO and BIG TCP to remove this
8-byte extension header. It might not sound that bad until we try to
apply it to tunneled traffic. Currently, the drivers don't attempt to
strip HBH if skb->encapsulation = 1. Moreover, trying to do so would
require dissecting different tunnel protocols and making corresponding
adjustments on case-by-case basis, which would slow down the fastpath
(potentially also requiring adjusting checksums in outer headers).
At the same time, BIG TCP IPv4 doesn't insert any extra headers and just
calculates the payload length from skb->len, significantly simplifying
implementing BIG TCP for tunnels.
Stop inserting HBH when building BIG TCP GSO SKBs.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260205133925.526371-3-alice.kernel@fastmail.im
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The next commits will transition away from using the hop-by-hop
extension header to encode packet length for BIG TCP. Add wrappers
around ip6->payload_len that return the actual value if it's non-zero,
and calculate it from skb->len if payload_len is set to zero (and a
symmetrical setter).
The new helpers are used wherever the surrounding code supports the
hop-by-hop jumbo header for BIG TCP IPv6, or the corresponding IPv4 code
uses skb_ip_totlen (e.g., in include/net/netfilter/nf_tables_ipv6.h).
No behavioral change in this commit.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260205133925.526371-2-alice.kernel@fastmail.im
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ivan Vecera says:
====================
dpll: zl3073x: Include current frequency in supported frequencies list
This series ensures that the current operating frequency of a DPLL pin
is always reported in its supported frequencies list.
Problem:
When a ZL3073x DPLL pin is registered, its supported frequencies are
read from the firmware node's "supported-frequencies-hz" property.
However, if the firmware node is missing, or doesn't include the
current operating frequency, the pin reports a frequency that isn't
in its supported list. This inconsistency can confuse userspace tools
that expect the current frequency to be among the supported values.
Solution:
Always include the current pin frequency as the first entry in the
supported frequencies list, followed by any additional frequencies
from the firmware node (with duplicates filtered out).
Patch 1 refactors the output pin frequency calculation into a reusable
helper function zl3073x_dev_output_pin_freq_get(), which mirrors the
existing zl3073x_dev_ref_freq_get() for input pins.
Patch 2 modifies zl3073x_pin_props_get() to obtain the current
frequency early and place it at index 0 of the supported frequencies
array, ensuring it is always present regardless of firmware node
contents.
====================
Link: https://patch.msgid.link/20260205154350.3180465-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ensure the current pin frequency is always present in the list of
supported frequencies reported to userspace. Previously, if the
firmware node was missing or didn't include the current operating
frequency in the supported-frequencies-hz property, the pin would
report a frequency that wasn't in its supported list.
Get the current frequency early in zl3073x_pin_props_get():
- For input pins: use zl3073x_dev_ref_freq_get()
- For output pins: use zl3073x_dev_output_pin_freq_get()
Place the current frequency at index 0 of the supported frequencies
array, then append frequencies from the firmware node (if present),
skipping any duplicate of the current frequency.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260205154350.3180465-3-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce zl3073x_dev_output_pin_freq_get() helper function to compute
the output pin frequency based on synthesizer frequency, output divisor,
and signal format. For N-div signal formats, the N-pin frequency is
additionally divided by esync_n_period.
Add zl3073x_out_is_ndiv() helper to check if an output is configured
in N-div mode (2_NDIV or 2_NDIV_INV signal formats).
Refactor zl3073x_dpll_output_pin_frequency_get() callback to use the
new helper, reducing code duplication and enabling reuse of the
frequency calculation logic in other contexts.
This is a preparatory change for adding current frequency to the
supported frequencies list in pin properties.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260205154350.3180465-2-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The output pin phase adjustment functions incorrectly negate the phase
compensation value.
Per the ZL3073x datasheet, the output phase compensation register is
simply a signed two's complement integer where:
- Positive values move the phase later in time
- Negative values move the phase earlier in time
No negation is required. The erroneous negation caused phase adjustments
to be applied in the wrong direction.
Note that input pin phase adjustment correctly uses negation because the
hardware has an inverted convention for input references (positive moves
phase earlier, negative moves phase later).
Fixes: 6287262f76 ("dpll: zl3073x: Add support to adjust phase")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260205181055.129768-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts says:
====================
mptcp: misc fixes for v6.19-rc8
Here are various unrelated fixes:
- Patch 1: when removing an MPTCP in-kernel PM endpoint, always mark the
corresponding ID as "available". Syzbot found a corner case where it
is not marked as such. A fix for up to v5.10.
- Patch 2: Linked to the previous patch, the variable name was confusing
and was probably partly responsible for the issue fixed by patch 1. No
"Fixes" tag: no need to backport that for the moment, but better to
avoid confusion now.
- Patch 3: fix all existing kdoc warnings linked to MPTCP code. No
"Fixes" tag: they were there for a while, and not considered as
important to backport.
- Patch 4: silence a compiler (false-positive) warning in the selftests.
No "Fixes" tag: it is a false-positive warning, only seen with some
versions.
====================
Link: https://patch.msgid.link/20260205-net-mptcp-misc-fixes-6-19-rc8-v2-0-c2720ce75c34@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This warning can be seen with GCC 15.2:
mptcp_connect.c: In function ‘main_loop’:
mptcp_connect.c:1422:37: warning: ‘peer’ may be used uninitialized [-Wmaybe-uninitialized]
1422 | if (connect(fd, peer->ai_addr, peer->ai_addrlen))
| ~~~~^~~~~~~~~
mptcp_connect.c:1377:26: note: ‘peer’ was declared here
1377 | struct addrinfo *peer;
| ^~~~
This variable is set in sock_connect_mptcp() in some conditions. If not,
this helper returns an error, and the program stops. So this is a false
positive, but better removing it by initialising peer to NULL.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260205-net-mptcp-misc-fixes-6-19-rc8-v2-4-c2720ce75c34@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The following warnings were visible:
$ ./scripts/kernel-doc -Wall -none \
net/mptcp/ include/net/mptcp.h include/uapi/linux/mptcp*.h \
include/trace/events/mptcp.h
Warning: net/mptcp/token.c:108 No description found for return value of 'mptcp_token_new_request'
Warning: net/mptcp/token.c:151 No description found for return value of 'mptcp_token_new_connect'
Warning: net/mptcp/token.c:246 No description found for return value of 'mptcp_token_get_sock'
Warning: net/mptcp/token.c:298 No description found for return value of 'mptcp_token_iter_next'
Warning: net/mptcp/protocol.c:4431 No description found for return value of 'mptcp_splice_read'
Warning: include/uapi/linux/mptcp_pm.h:13 missing initial short description on line:
* enum mptcp_event_type
Address all of them: either by using the 'Return:' keyword, or by adding
a missing initial short description.
The MPTCP CI will soon report issues with kdoc to avoid introducing new
issues and being flagged by the Netdev CI.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260205-net-mptcp-misc-fixes-6-19-rc8-v2-3-c2720ce75c34@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Syzkaller managed to find a combination of actions that was generating
this warning:
WARNING: net/mptcp/pm_kernel.c:1074 at __mark_subflow_endp_available net/mptcp/pm_kernel.c:1074 [inline], CPU#1: syz.7.48/2535
WARNING: net/mptcp/pm_kernel.c:1074 at mptcp_pm_nl_fullmesh net/mptcp/pm_kernel.c:1446 [inline], CPU#1: syz.7.48/2535
WARNING: net/mptcp/pm_kernel.c:1074 at mptcp_pm_nl_set_flags_all net/mptcp/pm_kernel.c:1474 [inline], CPU#1: syz.7.48/2535
WARNING: net/mptcp/pm_kernel.c:1074 at mptcp_pm_nl_set_flags+0x5de/0x640 net/mptcp/pm_kernel.c:1538, CPU#1: syz.7.48/2535
Modules linked in:
CPU: 1 UID: 0 PID: 2535 Comm: syz.7.48 Not tainted 6.18.0-03987-gea5f5e676cf5 #17 PREEMPT(voluntary)
Hardware name: QEMU Ubuntu 25.10 PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
RIP: 0010:__mark_subflow_endp_available net/mptcp/pm_kernel.c:1074 [inline]
RIP: 0010:mptcp_pm_nl_fullmesh net/mptcp/pm_kernel.c:1446 [inline]
RIP: 0010:mptcp_pm_nl_set_flags_all net/mptcp/pm_kernel.c:1474 [inline]
RIP: 0010:mptcp_pm_nl_set_flags+0x5de/0x640 net/mptcp/pm_kernel.c:1538
Code: 89 c7 e8 c5 8c 73 fe e9 f7 fd ff ff 49 83 ef 80 e8 b7 8c 73 fe 4c 89 ff be 03 00 00 00 e8 4a 29 e3 fe eb ac e8 a3 8c 73 fe 90 <0f> 0b 90 e9 3d ff ff ff e8 95 8c 73 fe b8 a1 ff ff ff eb 1a e8 89
RSP: 0018:ffffc9001535b820 EFLAGS: 00010287
netdevsim0: tun_chr_ioctl cmd 1074025677
RAX: ffffffff82da294d RBX: 0000000000000001 RCX: 0000000000080000
RDX: ffffc900096d0000 RSI: 00000000000006d6 RDI: 00000000000006d7
netdevsim0: linktype set to 823
RBP: ffff88802cdb2240 R08: 00000000000104ae R09: ffffffffffffffff
R10: ffffffff82da27d4 R11: 0000000000000000 R12: 0000000000000000
R13: ffff88801246d8c0 R14: ffffc9001535b8b8 R15: ffff88802cdb1800
FS: 00007fc6ac5a76c0(0000) GS:ffff8880f90c8000(0000) knlGS:0000000000000000
netlink: 'syz.3.50': attribute type 5 has an invalid length.
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
netlink: 1232 bytes leftover after parsing attributes in process `syz.3.50'.
CR2: 0000200000010000 CR3: 0000000025b1a000 CR4: 0000000000350ef0
Call Trace:
<TASK>
mptcp_pm_set_flags net/mptcp/pm_netlink.c:277 [inline]
mptcp_pm_nl_set_flags_doit+0x1d7/0x210 net/mptcp/pm_netlink.c:282
genl_family_rcv_msg_doit+0x117/0x180 net/netlink/genetlink.c:1115
genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
genl_rcv_msg+0x3a8/0x3f0 net/netlink/genetlink.c:1210
netlink_rcv_skb+0x16d/0x240 net/netlink/af_netlink.c:2550
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x3e9/0x4c0 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x4ab/0x5b0 net/netlink/af_netlink.c:1894
sock_sendmsg_nosec net/socket.c:718 [inline]
__sock_sendmsg+0xc9/0xf0 net/socket.c:733
____sys_sendmsg+0x272/0x3b0 net/socket.c:2608
___sys_sendmsg+0x2de/0x320 net/socket.c:2662
__sys_sendmsg net/socket.c:2694 [inline]
__do_sys_sendmsg net/socket.c:2699 [inline]
__se_sys_sendmsg net/socket.c:2697 [inline]
__x64_sys_sendmsg+0x110/0x1a0 net/socket.c:2697
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xed/0x360 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fc6adb66f6d
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fc6ac5a6ff8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007fc6addf5fa0 RCX: 00007fc6adb66f6d
RDX: 0000000000048084 RSI: 00002000000002c0 RDI: 000000000000000e
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
netlink: 'syz.5.51': attribute type 2 has an invalid length.
R13: 00007fff25e91fe0 R14: 00007fc6ac5a7ce4 R15: 00007fff25e920d7
</TASK>
The actions that caused that seem to be:
- Create an MPTCP endpoint for address A without any flags
- Create a new MPTCP connection from address A
- Remove the MPTCP endpoint: the corresponding subflows will be removed
- Recreate the endpoint with the same ID, but with the subflow flag
- Change the same endpoint to add the fullmesh flag
In this case, msk->pm.local_addr_used has been kept to 0 as expected,
but the corresponding bit in msk->pm.id_avail_bitmap was still unset
after having removed the endpoint, causing the splat later on.
When removing an endpoint, the corresponding endpoint ID was only marked
as available for "signal" types with an announced address, plus all
"subflow" types, but not the other types like an endpoint corresponding
to the initial subflow. In these cases, re-creating an endpoint with the
same ID didn't signal/create anything. Here, adding the fullmesh flag
was creating the splat when calling __mark_subflow_endp_available() from
mptcp_pm_nl_fullmesh(), because msk->pm.local_addr_used was set to 0
while the ID was marked as used.
To fix this issue, the corresponding bit in msk->pm.id_avail_bitmap can
always be set as available when removing an MPTCP in-kernel endpoint. In
other words, moving the call to __set_bit() to do it in all cases,
except for "subflow" types where this bit is handled in a dedicated
helper.
Note: instead of adding a new spin_(un)lock_bh that would be taken in
all cases, do all the actions requiring the spin lock under the same
block.
This modification potentially fixes another issue reported by syzbot,
see [1]. But without a reproducer or more details about what exactly
happened before, it is hard to confirm.
Fixes: e255683c06 ("mptcp: pm: re-using ID of unused removed ADD_ADDR")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/606
Reported-by: syzbot+f56f7d56e2c6e11a01b6@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/68fcfc4a.050a0220.346f24.02fb.GAE@google.com [1]
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260205-net-mptcp-misc-fixes-6-19-rc8-v2-1-c2720ce75c34@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, both the icssg-prueth and icssg-prueth-sr1 drivers create
a dedicated 'emac->cmd_wq' workqueue.
In the icssg-prueth-sr1 driver, this workqueue is not utilized at all.
In the icssg-prueth driver, the workqueue is only used to execute the
actual processing of ndo_set_rx_mode. However, creating a dedicated
workqueue for such a simple use case is unnecessary. To simplify the
code, switch to using the system default workqueue instead.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Tested-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://patch.msgid.link/20260205-icssg-prueth-workqueue-v2-1-cf5cf97efb37@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This helper is already (auto)inlined from IPv4 TCP stack.
Make it an inline function to benefit IPv6 as well.
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/2 grow/shrink: 1/0 up/down: 30/-49 (-19)
Function old new delta
tcp_v6_rcv 3448 3478 +30
__pfx_tcp_filter 16 - -16
tcp_filter 33 - -33
Total: Before=24891904, After=24891885, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260205164329.3401481-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While compile testing on less common architectures, I noticed that gcc-10 on
s390 finds a bug that all other configurations seem to miss:
drivers/net/ethernet/myricom/myri10ge/myri10ge.c: In function 'myri10ge_set_multicast_list':
drivers/net/ethernet/myricom/myri10ge/myri10ge.c:391:25: error: 'cmd.data0' is used uninitialized in this function [-Werror=uninitialized]
391 | buf->data0 = htonl(data->data0);
| ^~
drivers/net/ethernet/myricom/myri10ge/myri10ge.c:392:25: error: '*((void *)&cmd+4)' is used uninitialized in this function [-Werror=uninitialized]
392 | buf->data1 = htonl(data->data1);
| ^~
drivers/net/ethernet/myricom/myri10ge/myri10ge.c: In function 'myri10ge_allocate_rings':
drivers/net/ethernet/myricom/myri10ge/myri10ge.c:392:13: error: 'cmd.data1' is used uninitialized in this function [-Werror=uninitialized]
392 | buf->data1 = htonl(data->data1);
drivers/net/ethernet/myricom/myri10ge/myri10ge.c:1939:22: note: 'cmd.data1' was declared here
1939 | struct myri10ge_cmd cmd;
| ^~~
drivers/net/ethernet/myricom/myri10ge/myri10ge.c:393:13: error: 'cmd.data2' is used uninitialized in this function [-Werror=uninitialized]
393 | buf->data2 = htonl(data->data2);
drivers/net/ethernet/myricom/myri10ge/myri10ge.c:1939:22: note: 'cmd.data2' was declared here
1939 | struct myri10ge_cmd cmd;
It would be nice to understand how to make other compilers catch this as
well, but for the moment I'll just shut up the warning by fixing the
undefined behavior in this driver.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260205162935.2126442-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver started using dimlib but fails to select the corresponding
symbol, which results in a link failure:
x86_64-linux-ld: drivers/net/ethernet/huawei/hinic3/hinic3_irq.o: in function `hinic3_poll':
hinic3_irq.c:(.text+0x179): undefined reference to `net_dim'
x86_64-linux-ld: drivers/net/ethernet/huawei/hinic3/hinic3_irq.o: in function `hinic3_rx_dim_work':
hinic3_irq.c:(.text+0x1fb): undefined reference to `net_dim_get_rx_moderation'
Fixes: b35a6fd37a ("hinic3: Add adaptive IRQ coalescing with DIM")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260205161530.1308504-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The skb extension ids range from 0 .. 7 to fit their bits as flags into
a single byte. The ids are automatically enumnerated in enum skb_ext_id
in skbuff.h, where SKB_EXT_NUM is defined as the last value.
When having 8 skb extension ids (0 .. 7), SKB_EXT_NUM becomes 8 which is
a valid value for SKB_EXT_NUM.
Fixes: 96ea3a1e2d ("can: add CAN skb extension infrastructure")
Link: https://lore.kernel.org/netdev/aXoMqaA7b2CqJZNA@strlen.de/
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260205-skb_ext-v1-1-9ba992ccee8b@hartkopp.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In prestera_ethtool_set_fecparam(), the error message is opposite of
the condition checking PRESTERA_PORT_TCVR_SFP. FEC configuration is
not allowed on SFP ports, but the message says "non-SFP ports", which
does not match the condition. However, FEC may be required depending on
the transceiver, cable, or mode, and firmware already validates invalid
combinations.
Remove the SFP transceiver check and let firmware handle validation.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Acked-by: Elad Nachman <enachman@marvell.com>
Link: https://patch.msgid.link/20260205091958.231413-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using kmem_cache_free_bulk() in fq_gc() was not optimal.
1) It needs an array.
2) It is only saving cpu cycles for large batches.
The automatic array forces a stack canary, which is expensive.
In practice fq_gc was finding zero, one or two flows at most
per round.
Remove the array, use kmem_cache_free().
This makes fq_enqueue() smaller and faster.
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-79 (-79)
Function old new delta
fq_enqueue 1629 1550 -79
Total: Before=24886583, After=24886504, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260204190034.76277-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, unhash_nsid() scans the entire system for each netns being
killed, leading to O(L_dying_net * M_alive_net * N_id) complexity, as
__peernet2id() also performs a linear search in the IDR.
Optimize this to O(M_alive_net * N_id) by batching unhash operations. Move
unhash_nsid() out of the per-netns loop in cleanup_net() to perform a
single-pass traversal over survivor namespaces.
Identify dying peers by an 'is_dying' flag, which is set under net_rwsem
write lock after the netns is removed from the global list. This batches
the unhashing work and eliminates the O(L_dying_net) multiplier.
To minimize the impact on struct net size, 'is_dying' is placed in an
existing hole after 'hash_mix' in struct net.
Use a restartable idr_get_next() loop for iteration. This avoids the
unsafe modification issue inherent to idr_for_each() callbacks and allows
dropping the nsid_lock to safely call sleepy rtnl_net_notifyid().
Clean up redundant nsid_lock and simplify the destruction loop now that
unhashing is centralized.
Signed-off-by: Qiliang Yuan <yuanql9@chinatelecom.cn>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260204074854.3506916-1-realwujing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace the for loops with calls to crypto_unregister_ahashes(). In
img_register_algs(), return 'err' immediately and remove the goto
statement to simplify the error handling code.
Convert img_unregister_algs() to a void function since its return value
is never used.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
