Since commit 88785982a1 ("media: vb2: use lock if wait_prepare/finish
are NULL") it is no longer needed to set the wait_prepare/finish
vb2_ops callbacks as long as the lock field in vb2_queue is set.
Set the queue lock to &ctx->mutex, which makes it possible to drop
the wait_prepare/finish callbacks.
This simplifies the code and this is a step towards the goal of deleting
these callbacks.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
vb2 no longer requires locking around mmap since commit
f035eb4e97 ("[media] videobuf2: fix lockdep warning").
Since the streaming I/O mode for DVB support is by default off, and
the dvb utilities were never updated with streaming support, and
we never had regression tests for this streaming mode, this was
never noticed before.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Currently the buffers are being filled until full, which works fine
for the transport stream, but not when reading sections, those have
to be returned to userspace immediately, otherwise dvbv5-scan will
just wait forever.
Add a 'flush' argument to dvb_vb2_fill_buffer to indicate whether
the buffer must be flushed or wait until it is full.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Call drm_dev_exit() before returning -EINVAL.
Fixes: cd2c9c3015 ("drm/panthor: Add flag to map GEM object Write-Back Cacheable")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/aUOxxvXXtHHfFCcg@stanley.mountain
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Switch error injection testing from i915_inject_probe_failure
to ALLOW_ERROR_INJECTION. Here taken out calls to
i915_inject_probe_failure and changed to use
ALLOW_ERROR_INJECTION for the same functions.
Below functions are dropped from testing since I
couldn't hit those at module bind time, testing
these would just fail the tests. To include these
in test would need to find way to cause resetting in i915
which would trigger these:
intel_gvt_init
intel_wopcm_init
intel_uc_fw_upload
intel_gt_init with expected -EIO (-EINVAL is tested)
lrc_init_wa_ctx
intel_huc_auth
guc_check_version_range
intel_uc_fw_fetch
uc_fw_xfer
__intel_uc_reset_hw
guc_enable_communication
uc_init_wopcm
..and all stages of __force_fw_fetch_failures
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patch.msgid.link/20251216080754.221974-2-juhapekka.heikkila@gmail.com
In cases where the ww_mutex test was occasionally tripping on
hard to find issues, leaving qemu in a reboot loop was my best
way to reproduce problems. These reboots however wasted time
when I just wanted to run the test-ww_mutex logic.
So tweak the test-ww_mutex test so that it can be re-triggered
via a sysfs file, so the test can be run repeatedly without
doing module loads or restarting.
This has been particularly valuable to stressing and finding
issues with the proxy-exec series.
To use, run as root:
echo 1 > /sys/kernel/test_ww_mutex/run_tests
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251205013515.759030-4-jstultz@google.com
The test-ww_mutex test already allocates its own workqueue
so be sure to use it for the mtx.work and abba.work rather
then the default system workqueue.
This resolves numerous messages of the sort:
"workqueue: test_abba_work hogged CPU... consider switching to WQ_UNBOUND"
"workqueue: test_mutex_work hogged CPU... consider switching to WQ_UNBOUND"
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251205013515.759030-3-jstultz@google.com
Currently the test-ww_mutex tool only utilizes the wait-die
class of ww_mutexes, and thus isn't very helpful in exercising
the wait-wound class of ww_mutexes.
So extend the test to exercise both classes of ww_mutexes for
all of the subtests.
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251205013515.759030-2-jstultz@google.com
clang needs __always_inline instead of inline, even for tiny helpers.
This saves some cycles in system call fast path, and saves 195 bytes
on x86_64 build:
$ size vmlinux.before vmlinux.after
text data bss dec hex filename
34652814 22291961 5875180 62819955 3be8e73 vmlinux.before
34652619 22291961 5875180 62819760 3be8db0 vmlinux.after
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251204153127.1321824-1-edumazet@google.com
Merge series from Anurag Dutta <a-dutta@ti.com>:
This series addresses issues in the cadence-quadspi driver's probe
error path:
Patch 1 fixes a clock disable imbalance that occurs when probe fails
after runtime PM is enabled, particularly when DMA request returns
-EPROBE_DEFER.
Patch 2 adds proper error logging for DMA request failures using
dev_err_probe() to improve diagnostics and handle probe deferral
appropriately.
logs : https://gist.github.com/anuragdutta731/59925cd11a50913b7128c88cd5394db7
Rename rockchip_pcie_get_ltssm() to rockchip_pcie_get_ltssm_reg() and add
rockchip_pcie_get_ltssm() to get_ltssm() callback in order to show the
proper L1 Substates. The PCIE_CLIENT_LTSSM_STATUS[5:0] register returns
the same LTSSM layout as enum dw_pcie_ltssm. So the driver just need to
convey L1 PM Substates by returning the proper value defined in
pcie-designware.h.
cat /sys/kernel/debug/dwc_pcie_a40000000.pcie/ltssm_status
L1_2 (0x142)
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/1765503205-22184-2-git-send-email-shawn.lin@rock-chips.com
DWC core couldn't distinguish LTSSM state among L1.0, L1.1 and L1.2. But
the vendor glue driver may implement additional logic to convey this
information. So add two pseudo definitions for vendor glue drivers to
translate their internal L1 Substates for debugfs to show.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/1765503205-22184-1-git-send-email-shawn.lin@rock-chips.com
Merge series from Haibo Chen <haibo.chen@nxp.com>:
XSPI is a flexible SPI host controller which supports up to
2 external devices (2 CS). It support Single/Dual/Quad/Octal
mode data transfer.
The difference between XSPI and Flexspi is XSPI support
multiple independent execution environments (EENVs) for HW
virtualization with some limitations. Each EENV has its own
interrupt and its own set of programming registers that exists
in a specific offset range in the XSPI memory map.
The main environment (EENV0) address space contains all of the
registers for controlling EENV0 plus all of the general XSPI
control and programming registers. The register mnemonics for
the user environments (EENV1 to EENV4) have "_SUB_n" appended
to the mnemonic for the corresponding main-environment register.
Current driver based on EENV0, which means system already give
EENV0 right to linux.
This driver use SPI memory interface of the SPI framework to issue
flash memory operations. Tested this driver with mtd_debug and
UBIFS on NXP i.MX943 EVK board which has one MT35XU512ABA spi nor
flash. NOw this driver has the following key features:
- Support up to OCT DDR mode
- Support AHB read
- Support IP read and IP write
- Support two CS
Replace manual "request_threaded_irq()" with the device managed
"devm_request_threaded_irq" to manage the IRQ lifetime and also
it removes the smatch reported warning.
Remove the manual "free_irq()" in the "remove" function as free_irq
is tied to device teardown.
Signed-off-by: HariKrishna Sagala <hariconscious@gmail.com>
Link: https://patch.msgid.link/20251217054458.38257-2-hariconscious@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently device is using hardcoded slave properties
using the .read_prop callback from "struct sdw_slave_ops".
This patch removes this and uses the sdw_slave_read_prop API
to read the data directly from the ACPI table.
Signed-off-by: Niranjan H Y <niranjan.hy@ti.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251215153219.810-8-niranjan.hy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support for parsing the initilisation
data from ACPI table. This table is required to configure
each device correctly so that correct channel's data is
selected during playback.
Signed-off-by: Niranjan H Y <niranjan.hy@ti.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251215153219.810-7-niranjan.hy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add changes to support 4 tas2783A devices on mtl platform.
The supported unique IDs are updated to 9, a, c, d, where
c and d are configured to play left channels and 9 and a
are configured to play right channel.
Signed-off-by: Niranjan H Y <niranjan.hy@ti.com>
Link: https://patch.msgid.link/20251215153219.810-6-niranjan.hy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The firmware file for tas2783A contains the device
and algorithm settings. So the firmware files are unique
for a system and driver should have the ability to
distinctly identify and pick the right firmware.
This commit adds the method to uniquely identify the
firmware for a system based on the below format.
<Subsystem>-<Link>-<Unique>.bin
* Subsystem is the PCI device subsystem-id
* Link is the SoundWire link id on which the device recides.
* Unique is the SoundWire slave unique id in the system.
Signed-off-by: Niranjan H Y <niranjan.hy@ti.com>
Link: https://patch.msgid.link/20251215153219.810-5-niranjan.hy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently when the calibration is not found, it is wrongly
logged as device is not found. Fix this error message to
indicate that calibration data is not valid instead.
Signed-off-by: Niranjan H Y <niranjan.hy@ti.com>
Link: https://patch.msgid.link/20251215153219.810-4-niranjan.hy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove unwanted initialistaion writes to the
device which will now be part of the either firmware
or acpi table.
Signed-off-by: Niranjan H Y <niranjan.hy@ti.com>
Link: https://patch.msgid.link/20251215153219.810-3-niranjan.hy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the firmware version same as in Windows
projects. The firmware contains algorithm
parameters and some device configuration
writes which are part of the same firmware file.
Signed-off-by: Niranjan H Y <niranjan.hy@ti.com>
Link: https://patch.msgid.link/20251215153219.810-2-niranjan.hy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the machine driver for tas2783A can only
support 2 channels. This patch adds support for
2 channel playback with 4 device setup.
Signed-off-by: Niranjan H Y <niranjan.hy@ti.com>
Link: https://patch.msgid.link/20251215153219.810-1-niranjan.hy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace the manual `unsafe { core::mem::zeroed() }` initialization of
`bindings::file_operations` with `pin_init::zeroed()`. This removes the
explicit unsafe
Signed-off-by: Atharv Dubey <atharvd440@gmail.com>
Link: https://patch.msgid.link/20251201152759.16429-1-atharvd440@gmail.com
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
In mtk_pcie_init_irq_domain(), if mtk_pcie_allocate_msi_domains()
fails after port->irq_domain has been successfully created via
irq_domain_create_linear(), the function returns directly without
cleaning up the allocated IRQ domain, resulting in a resource leak.
Add irq_domain_remove() call in the error path to properly release the
INTx IRQ domain before returning the error.
Fixes: 43e6409db6 ("PCI: mediatek: Add MSI support for MT2712 and MT7622")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251119023308.476-1-vulab@iscas.ac.cn
Arnd Bergmann's patch [1] fixed the build dependency problem introduced by
bugfix commit cb2dc6d286 ("can: Kconfig: select CAN driver infrastructure
by default"). This ended up as commit 6abd4577bc ("can: fix build
dependency"), but I broke Arnd's fix by removing a dependency that we
thought was superfluous.
[1] https://lore.kernel.org/all/20251204100015.1033688-1-arnd@kernel.org/
Meanwhile the problem was also found by intel's kernel test robot,
complaining about undefined symbols:
| ERROR: modpost: "m_can_class_unregister" [drivers/net/can/m_can/m_can_platform.ko] undefined!
| ERROR: modpost: "m_can_class_free_dev" [drivers/net/can/m_can/m_can_platform.ko] undefined!
| ERROR: modpost: "m_can_class_allocate_dev" [drivers/net/can/m_can/m_can_platform.ko] undefined!
| ERROR: modpost: "m_can_class_get_clocks" [drivers/net/can/m_can/m_can_platform.ko] undefined!
| ERROR: modpost: "m_can_class_register" [drivers/net/can/m_can/m_can_platform.ko] undefined!
To fix this problem, add the missing dependency again.
Cc: Vincent Mailhol <mailhol@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512132253.vO9WFDJK-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512180808.fTAUQ2XN-lkp@intel.com/
Reported-by: Arnd Bergmann <arnd@arndb.de>
Closes: https://lore.kernel.org/all/7427949a-ea7d-4854-9fe4-e01db7d878c7@app.fastmail.com/
Fixes: 6abd4577bc ("can: fix build dependency")
Fixes: cb2dc6d286 ("can: Kconfig: select CAN driver infrastructure by default")
Acked-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20251217-can-fix-dependency-v1-1-fd2d4f2a2bf5@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Commit under Fixes enabled loadable module support for the driver under
the assumption that it shall be the sole user of the Cadence Host and
Endpoint library APIs. This assumption guarantees that we won't end up
in a case where the driver is built-in and the library support is built
as a loadable module.
With the introduction of [1], this assumption is no longer valid. The
SG2042 driver could be built as a loadable module, implying that the
Cadence Host library is also selected as a loadable module. However, the
pci-j721e.c driver could be built-in as indicated by CONFIG_PCI_J721E=y
due to which the Cadence Endpoint library is built-in. Despite the
library drivers being built as specified by their respective consumers,
since the 'pci-j721e.c' driver has references to the Cadence Host
library APIs as well, we run into a build error as reported at [0].
Fix this by adding config guards as a temporary workaround. The proper
fix is to split the 'pci-j721e.c' driver into independent Host and
Endpoint drivers as aligned at [2].
[0]: https://lore.kernel.org/r/202511111705.MZ7ls8Hm-lkp@intel.com/
[1]: commit 1c72774df0 ("PCI: sg2042: Add Sophgo SG2042 PCIe driver")
[2]: https://lore.kernel.org/r/37f6f8ce-12b2-44ee-a94c-f21b29c98821@app.fastmail.com/
Fixes: a2790bf81f ("PCI: j721e: Add support to build as a loadable module")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202511111705.MZ7ls8Hm-lkp@intel.com/
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251117113246.1460644-1-s-vadapalli@ti.com
Update call sites to import `ARef` from `sync::aref`
instead of `types`.
This aligns with the ongoing effort to move `ARef` and
`AlwaysRefCounted` to sync.
Suggested-by: Benno Lossin <lossin@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1173
Signed-off-by: Shankari Anand <shankari.ak0208@gmail.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20251123092438.182251-3-shankari.ak0208@gmail.com
[aliceryhl: keep trailing // at last import]
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Some platforms (e.g., X1E80100) expose Downstream Port Containment (DPC)
Extended Capability registers in the PCIe Root Port config space, but do
not fully support it. To prevent undefined behavior and ensure DPC cap is
not visible to PCI framework and users, remove DPC Extended Capability
unconditionally, since there is no Qcom platform support DPC till now.
Co-developed-by: Wenbin Yao <wenbin.yao@oss.qualcomm.com>
Signed-off-by: Wenbin Yao <wenbin.yao@oss.qualcomm.com>
Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251109-remove_cap-v1-5-2208f46f4dc2@oss.qualcomm.com
On some platforms like Glymur, the hardware does not support MSI-X in RC
mode, yet still exposes the MSI-X capability. However, it omits the
required MSI-X Table and PBA structures.
This mismatch can lead to issues where the PCIe port driver requests MSI-X
instead of MSI, causing the Root Port to trigger interrupts by writing to
an uninitialized address, resulting in SMMU faults.
To address this, remove MSI-X capability unconditionally for Root Ports of
all SoCs as none of the Qcom PCIe Root Ports support MSI-X.
Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
[mani: updated description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251109-remove_cap-v1-4-2208f46f4dc2@oss.qualcomm.com
Some platforms may not support ITS (Interrupt Translation Service) and MBI
(Message Based Interrupt), or there are not enough available empty SPI
lines for MBI, in which case the msi-map and msi-parent property will not
be provided in device tree node. For those cases, the DWC PCIe driver
defaults to using the iMSI-RX module as MSI controller. However, due to
DWC IP design, iMSI-RX cannot generate MSI interrupts for Root Ports even
when MSI is properly configured and supported as iMSI-RX will only monitor
and intercept incoming MSI TLPs from PCIe link, but the memory write
generated by Root Port are internal system bus transactions instead of
PCIe TLPs, so they are ignored.
This leads to interrupts such as PME, AER from the Root Port not received
on the host and the users have to resort to workarounds such as passing
"pcie_pme=nomsi" cmdline parameter.
To ensure reliable interrupt handling, remove MSI and MSI-X capabilities
from Root Ports when using iMSI-RX as MSI controller, which is indicated
by 'dw_pcie_rp::has_msi_ctrl == true'. This forces a fallback to INTx
interrupts by default, eliminating the need for manual kernel command line
workarounds.
With this behavior:
- Platforms with ITS/MBI support use ITS/MBI MSI for interrupts from all
components.
- Platforms without ITS/MBI support fall back to INTx for Root Ports and
use iMSI-RX for other PCI devices.
Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
[mani: reworded the comment]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Link: https://patch.msgid.link/20251109-remove_cap-v1-3-2208f46f4dc2@oss.qualcomm.com
On some platforms, certain PCIe Capabilities may be present in hardware
but are not fully implemented as defined in PCIe spec. These incomplete
capabilities should be hidden from the PCI framework to prevent unexpected
behavior.
Introduce two APIs to remove a specific PCIe Capability and Extended
Capability by updating the previous capability's next offset field to skip
over the unwanted capability. These APIs allow RC drivers to easily hide
unsupported or partially implemented capabilities from software.
Co-developed-by: Wenbin Yao <wenbin.yao@oss.qualcomm.com>
Signed-off-by: Wenbin Yao <wenbin.yao@oss.qualcomm.com>
Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251109-remove_cap-v1-2-2208f46f4dc2@oss.qualcomm.com
Add support for finding the preceding capability position in PCI
capability list by extending the capability finding macros with an
additional parameter. This functionality is essential for modifying PCI
capability list, as it provides the necessary information to update the
"next" pointer of the predecessor capability when removing entries.
Modify two macros to accept a new 'prev_ptr' parameter:
- PCI_FIND_NEXT_CAP - Now accepts 'prev_ptr' parameter for standard
capabilities
- PCI_FIND_NEXT_EXT_CAP - Now accepts 'prev_ptr' parameter for extended
capabilities
When a capability is found, these macros:
- Store the position of the preceding capability in *prev_ptr
(if prev_ptr != NULL)
- Maintain all existing functionality when prev_ptr is NULL
Update current callers to accommodate this API change by passing NULL to
'prev_ptr' argument if they do not care about the preceding capability
position.
No functional changes to driver behavior result from this commit as it
maintains the existing capability finding functionality while adding the
infrastructure for future capability removal operations.
Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251109-remove_cap-v1-1-2208f46f4dc2@oss.qualcomm.com
After commit 894af4a1cd ("objtool: Validate kCFI calls"), compile
testing pcie-rcar-host.c with CONFIG_FINEIBT=y and CONFIG_OF=n results
in a no-cfi objtool warning in rcar_pcie_probe():
$ cat allno.config
CONFIG_CFI=y
CONFIG_COMPILE_TEST=y
CONFIG_CPU_MITIGATIONS=y
CONFIG_GENERIC_PHY=y
CONFIG_MITIGATION_RETPOLINE=y
CONFIG_MODULES=y
CONFIG_PCI=y
CONFIG_PCI_MSI=y
CONFIG_PCIE_RCAR_HOST=y
CONFIG_X86_KERNEL_IBT=y
$ make -skj"$(nproc)" ARCH=x86_64 KCONFIG_ALLCONFIG=1 LLVM=1 clean allnoconfig vmlinux
vmlinux.o: warning: objtool: rcar_pcie_probe+0x191: no-cfi indirect call!
When CONFIG_OF is unset, of_device_get_match_data() returns NULL, so
LLVM knows this indirect call has no valid destination and drops the
kCFI setup before the call, triggering the objtool check that makes sure
all indirect calls have kCFI setup.
This driver depends on OF for probing with non-NULL data for every match
so this call will never be NULL in practice. Add a hard Kconfig
dependency on OF to avoid the warning.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202510092124.O2IX0Jek-lkp@intel.com/
Closes: https://github.com/ClangBuiltLinux/linux/issues/2134
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251014-rcar_pcie_probe-avoid-nocfi-objtool-warning-v2-1-6e0204b002c6@kernel.org
De-referencing param.oa_unit, when an OA unit id is not provided during
stream open, results in NPD below.
Oops: general protection fault, probably for non-canonical address...
KASAN: null-ptr-deref in range...
RIP: 0010:xe_oa_stream_open_ioctl+0x169/0x38a0
xe_observation_ioctl+0x19f/0x270
drm_ioctl_kernel+0x1f4/0x410
Fix this by moving default oa unit assignment before the dereference.
Reported-by: Peter Senna Tschudin <peter.senna@linux.intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6840
Fixes: c7e269aa56 ("drm/xe/oa: Allow exec_queue's to be specified only for OAG OA unit")
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Link: https://patch.msgid.link/20251212061850.1565459-2-ashutosh.dixit@intel.com
On Qualcomm Kaanapali platform, IMEM is a block of SRAM shared across
multiple IP blocks which can falk back to "mmio-sram". Documnent it and
its child node "qcom,pil-reloc-info" which is used for collecting
remoteproc ramdumps.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251123-knp-soc-binding-v4-1-42b349a66c59@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add a compatible for the Power Domain Controller on Kaanapali platforms.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20251021-knp-pdc-v2-1-a38767f5bb8e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Physical client IDs are used on Glymur Inter Process Communication
Controller (IPCC), add a corresponding header file.
Signed-off-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20251031-knp-ipcc-v3-3-62ffb4168dff@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On earlier platforms, Inter Process Communication Controller (IPCC) used
virtual client IDs and performed virtual-to-physical mapping in hardware,
so the IDs defined in dt-bindings/mailbox/qcom-ipcc.h are common across
platforms. Physical client IDs instead of virtual client IDs are used for
qcom new platforms like Kaanapali, which will be parsed by the devicetree
and passed to hardware to use Physical client IDs directly. Since physical
client IDs could vary across platforms, add a corresponding header file
for the Kaanapali platform.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20251031-knp-ipcc-v3-2-62ffb4168dff@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Document the Kaanapali SoC binding and the boards which use it.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251215-knp-dts-v4-1-1541bebeb89f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for Global clock controller for Kaanapali Qualcomm SoC.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251209-gcc_kaanapali-v3-v5-4-3af118262289@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the TCSR clock controller that provides the refclks on Kaanapali
platform for PCIe, USB and UFS subsystems.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251209-gcc_kaanapali-v3-v5-3-3af118262289@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
