devm_pm_runtime_enable() can fail due to memory allocation failures.
The current code ignores its return value and proceeds with
pm_runtime_resume_and_get(), which may operate on incorrectly
initialized runtime PM state.
Check the return value of devm_pm_runtime_enable() and return the
error code if it fails.
Fixes: 6a2277a0eb ("mtd: rawnand: renesas: Use runtime PM instead of the raw clock API")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
If the IOVA is limited to less than 48 the page table will be constructed
with a 3 level configuration which is unsupported by hardware.
Like the second stage the caller needs to pass in both the top_level an
the vasz to specify a table that has more levels than required to hold the
IOVA range.
Fixes: 6cbc09b771 ("iommu/vt-d: Restore previous domain::aperture_end calculation")
Reported-by: Calvin Owens <calvin@wbinvd.org>
Closes: https://lore.kernel.org/r/8f257d2651eb8a4358fcbd47b0145002e5f1d638.1764237717.git.calvin@wbinvd.org
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Calvin Owens <calvin@wbinvd.org>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
VT-d second stage HW specifies both the maximum IOVA and the supported
table walk starting points. Weirdly there is HW that only supports a 4
level walk but has a maximum IOVA that only needs 3.
The current code miscalculates this and creates a wrongly sized page table
which ultimately fails the compatibility check for number of levels.
This is fixed by allowing the page table to be created with both a vasz
and top_level input. The vasz will set the aperture for the domain while
the top_level will set the page table geometry.
Add top_level to vtdss and correct the logic in VT-d to generate the right
top_level and vasz from mgaw and sagaw.
Fixes: d373449d8e ("iommu/vt-d: Use the generic iommu page table")
Reported-by: Calvin Owens <calvin@wbinvd.org>
Closes: https://lore.kernel.org/r/8f257d2651eb8a4358fcbd47b0145002e5f1d638.1764237717.git.calvin@wbinvd.org
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Calvin Owens <calvin@wbinvd.org>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Add the missing forward declarations and includes so it does not have
implicit dependencies. mem_encrypt.h is a public header imported by
drivers. Users should not have to guess what include files are needed.
Resolves a kbuild splat:
In file included from drivers/iommu/generic_pt/fmt/iommu_amdv1.c:15:
In file included from drivers/iommu/generic_pt/fmt/iommu_template.h:36:
In file included from drivers/iommu/generic_pt/fmt/amdv1.h:23:
In file included from include/linux/mem_encrypt.h:17:
>> arch/powerpc/include/asm/mem_encrypt.h:13:49: warning: declaration of 'struct device' will not be visible outside of this function [-Wvisibility]
13 | static inline bool force_dma_unencrypted(struct device *dev)
Fixes: 879ced2bab ("iommupt: Add the AMD IOMMU v1 page table format")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202511161358.rS5pSb3U-lkp@intel.com/
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
There is no point in asking the user about the Generic Radix Page
Table API:
- All IOMMU drivers that use this API already select GENERIC_PT when
needed,
- Most users probably do not know what to answer anyway.
Fixes: 7c5b184db7 ("genpt: Generic Page Table base API")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
With time counter test, it is to verify that time count starts from 0
and always grows up then.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
This test case setup one-shot timer and execute idle instruction
immediately to indicate giving up CPU, hypervisor will emulate SW
hrtimer and wakeup vCPU when SW hrtimer is fired.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add timer test case based on common arch_timer code, timer interrupt
with one-shot and period mode is tested.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Michael Chan says:
====================
bnxt_en: Updates for net-next (part)
This series includes an enhnacement to the priority TX counters,
an enhancement to a PHY module error extack message, cleanup of
unneeded MSIX logic in bnxt_ulp.c, adding CQ dump during TX timeout,
LRO/HW_GRO performance improvement by enabling Relaxed Ordering,
and improved SRIOV admin link state support.
====================
Link: https://patch.msgid.link/20251126215648.1885936-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The firmware can now cache the virtual link admin state (auto/on/off) of
all VFs and as such, the PF driver no longer has to intercept the VF
driver's port_phy_qcfg() call and then provide the link admin state.
If the FW does not have this capability, fall back to the existing
interception method.
The initial default link admin state (auto) is also set initially when
the VFs are created.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Mohammad Shuab Siddique <mohammad-shuab.siddique@broadcom.com>
Signed-off-by: Rob Miller <rmiller@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20251126215648.1885936-7-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With End-of-Packet padding (EOP) set, the chip will disable Relaxed
Ordering (RO) of TPA data packets. A TPA segment with EOP set will be
padded to the next cache boundary and can potentially overwrite the
beginning bytes of the next TPA segment when RO is enabled on 5760X.
To prevent that, the chip disables RO for TPA when EOP is set.
To take advantge of RO and higher performance, do not set EOP on
5760X chips when TPA is enabled. Define a proper RX_BD_FLAGS_AGG_EOP
constant to make it clear that we are setting EOP.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20251126215648.1885936-6-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MSIX is always requested when the RoCE driver calls bnxt_register_dev().
We already check bnxt_ulp_registered(), so checking the flag is
redundant. It was a left-over flag after converting to auxbus, so
remove it.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20251126215648.1885936-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rturn early with -EOPNOTSUPP and an extack message if the PHY type is
BaseT since module status is not available for BaseT.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Gautam R A <gautam-r.a@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20251126215648.1885936-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The priority packet and byte counters in ethtool -S are returned by
the driver based on the pri2cos mapping. The assumption is that each
priority is mapped to one and only one hardware CoS queue. In a
special RoCE configuration, the FW uses combined CoS queue 0 and CoS
queue 1 for the priority mapped to CoS queue 0. In this special
case, we need to add the CoS queue 0 and CoS queue 1 counters for
the priority packet and byte counters.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20251126215648.1885936-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-11-25 (ice, idpf, iavf, ixgbe, ixgbevf, e1000e)
Natalia cleans up ixgbevf_q_vector struct removing an unused field.
Emil converts vport state tracking from enum to bitmap and removes
unneeded states for idpf.
Tony removes an unneeded check from e1000e.
Alok Tiwari removes an unnecessary second call to
ixgbe_non_sfp_link_config() and adjusts the checked member, in idpf, to
reflect the member that is later used. He also fixes various typos and
messages for better clarity misc Intel drivers.
====================
Link: https://patch.msgid.link/20251125223632.1857532-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current dev_warn messages for too many VLAN changes are confusing
and one place incorrectly references "add" instead of "delete" VLANs
due to copy-paste errors.
- Use dev_info instead of dev_warn to lower the log level.
- Rephrase the message to: "virtchnl: Too many VLAN [add|delete]
([v1|v2]) requests; splitting into multiple messages to PF\n".
Suggested-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20251125223632.1857532-12-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix a typo in the ice_fdir_has_frag() kernel-doc comment ("is" -> "if")
- Correct the NVM erase error message format string from "0x02%x" to
"0x%02x" so the module value is printed correctly.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20251125223632.1857532-11-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The error messages in idpf_rx_desc_alloc_all() used the group index i
when reporting memory allocation failures for individual Rx and Rx buffer
queues. This is incorrect.
Update the messages to use the correct queue index j and include the
queue group index i for clearer identification of the affected Rx and Rx
buffer queues.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20251125223632.1857532-10-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
idpf_compl_queue uses a union for comp, comp_4b, and desc_ring. The
release path should check complq->desc_ring to determine whether the DMA
descriptor ring is allocated. The current check against comp works but is
leftover from a previous commit and is misleading in this context.
Switching the check to desc_ring improves readability and more directly
reflects the intended meaning, since desc_ring is the field representing
the allocated DMA-backed descriptor ring.
No functional change.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20251125223632.1857532-9-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ixgbe_non_sfp_link_config() is called twice in ixgbe_open()
once to assign its return value to err and again in the
conditional check. This patch uses the stored err value
instead of calling the function a second time. This avoids
redundant work and ensures consistent error reporting.
Also fix a small typo in the ixgbe_remove() comment:
"The could be caused" -> "This could be caused".
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20251125223632.1857532-8-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert vport state to a bitmap and remove the DOWN state which is
redundant in the existing logic. There are no functional changes aside
from the use of bitwise operations when setting and checking the states.
Removed the double underscore to be consistent with the naming of other
bitmaps in the header and renamed current_state to vport_is_up to match
the meaning of the new variable.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Chittim Madhu <madhu.chittim@intel.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20251125223632.1857532-6-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Flex array should be at the end of the structure and use [] syntax
Remove unused fields of ixgbevf_q_vector.
They aren't used since busy poll was moved to core code in commit
508aac6dee ("ixgbevf: get rid of custom busy polling code").
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Natalia Wochtman <natalia.wochtman@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20251125223632.1857532-5-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The KMSG_COMPONENT macro is a leftover of the s390 specific "kernel message
catalog" from 2008 [1] which never made it upstream.
The macro was added to s390 code to allow for an out-of-tree patch which
used this to generate unique message ids. Also this out-of-tree doesn't
exist anymore.
The pattern of how the KMSG_COMPONENT is used was partially also used for
non s390 specific code, for whatever reasons.
Remove the macro in order to get rid of a pointless indirection.
[1] https://lwn.net/Articles/292650/
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://patch.msgid.link/20251126142242.2124317-1-hca@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert the Cavium Thunder NIC VF driver to use the new .get_rx_ring_count
ethtool operation instead of implementing .get_rxnfc solely for handling
ETHTOOL_GRXRINGS command. This simplifies the code by removing the
switch statement and replacing it with a direct return of the queue
count.
The new callback provides the same functionality in a more direct way,
following the ongoing ethtool API modernization.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20251126-gxring_cavium-v1-1-a066c0c9e0c6@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The extra "count >= limit" check in stmmac_rx_zc() is redundant and
has no effect because the value of "count" doesn't change after the
while condition at this point.
However, it can change after "read_again:" label:
while (count < limit) {
...
if (count >= limit)
break;
read_again:
...
/* XSK pool expects RX frame 1:1 mapped to XSK buffer */
if (likely(status & rx_not_ls)) {
xsk_buff_free(buf->xdp);
buf->xdp = NULL;
dirty++;
count++;
goto read_again;
}
...
This patch addresses the same issue previously resolved in stmmac_rx()
by commit fa02de9e75 ("net: stmmac: fix rx budget limit check").
The fix is the same: move the check after the label to ensure that it
bounds the goto loop.
Fixes: bba2556efa ("net: stmmac: Enable RX via AF_XDP zero-copy")
Signed-off-by: Alexey Kodanev <aleksei.kodanev@bell-sw.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20251126104327.175590-1-aleksei.kodanev@bell-sw.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extract MIB constants into the header file to improve code style. This
patch will not change the behavior of the function.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://patch.msgid.link/20251126084024.2843851-3-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are hard-to-find unused fields in the MIB table I didn't notice in
the example driver code, causing wrong interpretation of the MIB data.
For some 64-bit attributes, the current (wrong) implementation took the
correct lower 32 bits, but messed up the upper 32 bits, so it would work
accidentally until 32-bit overflows happen. Fix that too.
Fixes: 186623f4aa ("net: dsa: yt921x: Add support for Motorcomm YT921x")
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://patch.msgid.link/20251126084024.2843851-2-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This adds DASH support for chip RTL8127AP. Its mac version is
RTL_GIGA_MAC_VER_80. DASH is a standard for remote management of network
device, allowing out-of-band control.
Signed-off-by: Javen Xu <javen_xu@realsil.com.cn>
Link: https://patch.msgid.link/20251126055950.2050-1-javen_xu@realsil.com.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Neither sock4 nor sock6 pointers are guaranteed to be non-NULL in
vxlan_xmit_one, e.g. if the iface is brought down. This can lead to the
following NULL dereference:
BUG: kernel NULL pointer dereference, address: 0000000000000010
Oops: Oops: 0000 [#1] SMP NOPTI
RIP: 0010:vxlan_xmit_one+0xbb3/0x1580
Call Trace:
vxlan_xmit+0x429/0x610
dev_hard_start_xmit+0x55/0xa0
__dev_queue_xmit+0x6d0/0x7f0
ip_finish_output2+0x24b/0x590
ip_output+0x63/0x110
Mentioned commits changed the code path in vxlan_xmit_one and as a side
effect the sock4/6 pointer validity checks in vxlan(6)_get_route were
lost. Fix this by adding back checks.
Since both commits being fixed were released in the same version (v6.7)
and are strongly related, bundle the fixes in a single commit.
Reported-by: Liang Li <liali@redhat.com>
Fixes: 6f19b2c136 ("vxlan: use generic function for tunnel IPv4 route lookup")
Fixes: 2aceb896ee ("vxlan: use generic function for tunnel IPv6 route lookup")
Cc: Beniamino Galvani <b.galvani@gmail.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20251126102627.74223-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ptp_clock_settime() assumes every ptp_clock has implemented settime64().
Stub it with -EOPNOTSUPP to prevent a NULL dereference.
The fix is similar to commit 329d050bbe ("gve: Implement settime64
with -EOPNOTSUPP").
Fixes: d734223b2f ("iavf: add initial framework for registering PTP clock")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Tim Hostetler <thostet@google.com>
Link: https://patch.msgid.link/20251126094850.2842557-1-mschmidt@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This 0x88C3 is registered to Infineon Technologies Corporate Research ST
and are used by MaxLinear.
Infineon made a spin off called Lantiq.
Lantiq was acquired by Intel
MaxLinear acquired Intels Connected Home division.
The product FAQ from MaxLinear describes it's history from the F24S.
The driver for the gsw1xx is based on Lantiq showing it's similarities.
Ref https://standards-oui.ieee.org/ethertype/eth.txt
Signed-off-by: Peter Enderborg <Peter.Enderborg@axis.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use DEFINE_RAW_FLEX() to avoid a -Wflex-array-member-not-at-end warning.
Remove fixed-size array struct usb_cdc_ncm_dpe16 dpe16[2]; from struct
mbim_tx_hdr, so that flex-array member struct mbim_tx_hdr::ndp16.dpe16[]
ends last in this structure.
Compensate for this by using the DEFINE_RAW_FLEX() helper to declare the
on-stack struct instance that contains struct usb_cdc_ncm_ndp16 as a
member. Adjust the rest of the code, accordingly.
So, with these changes fix the following warning:
drivers/net/wwan/mhi_wwan_mbim.c:81:34: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The tx->dropped_pkt counter is a 64-bit integer that is incremented
directly. On 32-bit architectures, this operation is not atomic and
can lead to read/write tearing if a reader accesses the counter during
the update. This can result in incorrect values being reported for
dropped packets.
To prevent this potential data corruption, wrap the increment
operation with u64_stats_update_begin() and u64_stats_update_end().
This ensures that updates to the 64-bit counter are atomic, even on
32-bit systems, by using a sequence lock.
The u64_stats_sync API requires the writer to have exclusive access,
which is already provided in this context by the network stack's
serialization of the transmit path (net_device_ops::ndo_start_xmit
[1]) for a given queue.
[1]: https://www.kernel.org/doc/Documentation/networking/netdevices.txt
Signed-off-by: Max Yuan <maxyuan@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit e20dfbad8a ("net: fix napi_consume_skb() with alien skbs")
added a skb->cpu check to napi_consume_skb(), before the point where
napi_consume_skb() validated skb is not NULL.
Add an explicit check to the early exit condition.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As those following recent changes from Eric know very well
using NAPI skb cache is crucial to achieve good perf, at
least on recent AMD platforms. Make sure bnxt feeds the skb
cache with Tx skbs.
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert all the legacy code directly accessing the pp fields in net_iov
to access them through @desc in net_iov.
Signed-off-by: Byungchul Park <byungchul@sk.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- two last minute fixes for the recently modified DMA API infrastructure:
a proper handling of DMA_ATTR_MMIO in dma_iova_unlink() function (me) and
a regression fix for the code refactoring related to P2PDMA (Pranjal
Shrivastava)
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSrngzkoBtlA8uaaJ+Jp1EFxbsSRAUCaSh6UAAKCRCJp1EFxbsS
RCYGAP94GdoTEBmQL1dXLooASbHHAyB5xrd8Di1H/Aqd7maCvAEAgT2+BRPyEtf+
wiz4mwKMG1RrF9Cj4XqPqJ2NDU1zdQ8=
=ngH/
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.18-2025-11-27' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping fixes from Marek Szyprowski:
"Two last minute fixes for the recently modified DMA API infrastructure:
- proper handling of DMA_ATTR_MMIO in dma_iova_unlink() function (me)
- regression fix for the code refactoring related to P2PDMA (Pranjal
Shrivastava)"
* tag 'dma-mapping-6.18-2025-11-27' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma-direct: Fix missing sg_dma_len assignment in P2PDMA bus mappings
iommu/dma: add missing support for DMA_ATTR_MMIO for dma_iova_unlink()
