Commit 8c3170628a ("wifi: brcmfmac: keep power during suspend if board
requires it") changed default behavior of the BRCMFMAC driver, which now
keeps SDIO card powered during system suspend to enable optional support
for WOWL. This feature is not supported by the legacy Exynos4 based
boards and leads to WLAN disfunction after system suspend/resume cycle.
Fix this by annotating SDIO host used by WLAN chip with
'cap-power-off-card' property, which should have been there from the
beginning.
Fixes: f1b0ffaa68 ("ARM: dts: exynos: Enable WLAN support for the UniversalC210 board")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20251126102618.3103517-2-m.szyprowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Commit 78b72897a5 ("soc: samsung: exynos-pmu: Enable CPU Idle for
gs101") added system wide suspend/resume callbacks to Exynos PMU driver,
but some items used by these callbacks are initialized only on
GS101-compatible boards. Move that initialization to exynos_pmu_probe()
to avoid potential lockdep warnings like below observed during system
suspend/resume cycle:
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
CPU: 0 UID: 0 PID: 2134 Comm: rtcwake Not tainted 6.18.0-rc7-next-20251126-00039-g1d656a1af243 #11794 PREEMPT
Hardware name: Samsung Exynos (Flattened Device Tree)
Call trace:
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x68/0x88
dump_stack_lvl from register_lock_class+0x970/0x988
register_lock_class from __lock_acquire+0xc8/0x29ec
__lock_acquire from lock_acquire+0x134/0x39c
lock_acquire from _raw_spin_lock+0x38/0x48
_raw_spin_lock from exynos_cpupm_suspend_noirq+0x18/0x34
exynos_cpupm_suspend_noirq from dpm_run_callback+0x98/0x2b8
dpm_run_callback from device_suspend_noirq+0x8c/0x310
Fixes: 78b72897a5 ("soc: samsung: exynos-pmu: Enable CPU Idle for gs101")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20251126110038.3326768-1-m.szyprowski@samsung.com
[krzk: include calltrace into commit msg]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The macro for_each_console_srcu iterates over all registered consoles. It's
implied that all registered consoles have CON_ENABLED flag set, making
the check for the flag unnecessary. Call console_is_usable function to
fully verify if the given console is usable before calling the ->unblank
callback.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://patch.msgid.link/20251121-printk-cleanup-part2-v2-3-57b8b78647f4@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
All consoles found on for_each_console are registered, meaning that all
of them have the CON_ENABLED flag set. Since NBCON was introduced it's
important to check if a given console also implements the NBCON callbacks.
The function console_is_usable does exactly that.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://patch.msgid.link/20251121-printk-cleanup-part2-v2-2-57b8b78647f4@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
The original code tried to find a console that has CON_BOOT _or_
CON_ENABLED flag set. The flag CON_ENABLED is set to all registered
consoles, so in this case this check is always true, even for the
CON_BOOT consoles.
The initial intent of the kgdboc_earlycon_init was to get a console
early (CON_BOOT) or later on in the process (CON_ENABLED). The
code was using for_each_console macro, meaning that all console structs
were previously registered on the printk() machinery. At this point,
any console found on for_each_console is safe for kgdboc_earlycon_init
to use.
Dropping the check makes the code cleaner, and avoids further confusion
by future readers of the code.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://patch.msgid.link/20251121-printk-cleanup-part2-v2-1-57b8b78647f4@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Make do_proc_douintvec static and export proc_douintvec_conv wrapper
function for external use. This is to keep with the design in sysctl.c.
Update fs/pipe.c to use the new public API.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Create a converter for the pipe-max-size proc_handler using the
SYSCTL_UINT_CONV_CUSTOM. Move SYSCTL_CONV_IDENTITY macro to the sysctl
header to make it available for pipe size validation. Keep returning
-EINVAL when (val == 0) by using a range checking converter and setting
the minimal valid value (extern1) to SYSCTL_ONE. Keep round_pipe_size by
passing it as the operation for SYSCTL_USER_TO_KERN_INT_CONV.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Move proc_doulongvec_ms_jiffies_minmax to kernel/time/jiffies.c. Create
a non static wrapper function proc_doulongvec_minmax_conv that
forwards the custom convmul and convdiv argument values to the internal
do_proc_doulongvec_minmax. Remove unused linux/times.h include from
kernel/sysctl.c.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Move integer jiffies converters (proc_dointvec{_,_ms_,_userhz_}jiffies
and proc_dointvec_ms_jiffies_minmax) to kernel/time/jiffies.c. Error
stubs for when CONFIG_PRCO_SYSCTL is not defined are not reproduced
because all the jiffies converters go through proc_dointvec_conv which
is already stubbed. This is part of the greater effort to move sysctl
logic out of kernel/sysctl.c thereby reducing merge conflicts in
kernel/sysctl.c.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Move SYSCTL_USER_TO_KERN_UINT_CONV and SYSCTL_UINT_CONV_CUSTOM macros to
include/linux/sysctl.h. No need to embed sysctl_kern_to_user_uint_conv
in a macro as it will not need a custom kernel pointer operation. This
is a preparation commit to enable jiffies converter creation outside
kernel/sysctl.c.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Move direction macros (SYSCTL_{USER_TO_KERN,KERN_TO_USER}) and the
integer converter macros (SYSCTL_{USER_TO_KERN,KERN_TO_USER}_INT_CONV,
SYSCTL_INT_CONV_CUSTOM) into include/linux/sysctl.h. This is a
preparation commit to enable jiffies converter creation outside
kernel/sysctl.c.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
The new non-static proc_dointvec_conv forwards a custom converter
function to do_proc_dointvec from outside the sysctl scope. Rename the
do_proc_dointvec call points so any future changes to proc_dointvec_conv
are propagated in sysctl.c This is a preparation commit that allows the
integer jiffie converter functions to move out of kernel/sysctl.c.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEn/sM2K9nqF/8FWzzDHRl3/mQkZwFAmkm2EcTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRAMdGXf+ZCRnCT7B/98qQUzIef9I3Z0jsQhPmNHzyf/lO2d
dym2qE3axbLfiUziC8FA997iDellCR/TqOHD1iVsfw2ifaiBwKx63ZOv3AY1ob0+
C0lM6qTBA8HNn1M9Ij4x96v+qz3dE5n0eyvKvDdEmiUL6gz9T+QItjTdph4WIyWL
bpnPPUs75KLDtlTkztTJ807fStnCJMn6UP+tXcqjLE+1lZ9k+hpLH4jzprn4oVry
vLU5TmbXkDZVL9MdpecExHE5mTV1f1Fch7TtliUoBY9CFZ58CSXkuSzu38F3j/xD
nytAydXNy6wjDU5GkIca2g0MPWmBI3EF5QHvfnWBjxScQC6MdUxP5wrJ
=F3+Y
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.19-20251126' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2025-11-26
this is a pull request of 27 patches for net-next/main.
The first 17 patches are by Vincent Mailhol and Oliver Hartkopp and
add CAN XL support to the CAN netlink interface.
Geert Uytterhoeven and Biju Das provide 7 patches for the rcar_canfd
driver to add suspend/resume support.
The next 2 patches are by Markus Schneider-Pargmann and add them as
the m_can maintainer.
Conor Dooley's patch updates the mpfs-can DT bindungs.
linux-can-next-for-6.19-20251126
* tag 'linux-can-next-for-6.19-20251126' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (27 commits)
dt-bindings: can: mpfs: document resets
MAINTAINERS: Simplify m_can section
MAINTAINERS: Add myself as m_can maintainer
can: rcar_canfd: Add suspend/resume support
can: rcar_canfd: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
can: rcar_canfd: Invert CAN clock and close_candev() order
can: rcar_canfd: Extract rcar_canfd_global_{,de}init()
can: rcar_canfd: Use devm_clk_get_optional() for RAM clk
can: rcar_canfd: Invert global vs. channel teardown
can: rcar_canfd: Invert reset assert order
can: dev: print bitrate error with two decimal digits
can: raw: instantly reject unsupported CAN frames
can: add dummy_can driver
can: calc_bittiming: add can_calc_sample_point_pwm()
can: calc_bittiming: add can_calc_sample_point_nrz()
can: calc_bittiming: replace misleading "nominal" by "reference"
can: netlink: add PWM netlink interface
can: calc_bittiming: add PWM calculation
can: bittiming: add PWM validation
can: bittiming: add PWM parameters
...
====================
Link: https://patch.msgid.link/20251126120106.154635-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The buffer arg in proc handler functions have been void* (no __user
qualifier) since commit 32927393dc ("sysctl: pass kernel pointers to
->proc_handler"). The __user qualifier was erroneously brought back in
commit 0df8bdd5e3 ("stackleak: move stack_erasing sysctl to
stackleak.c"). This fixes the error by removing the __user qualifier.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202510221719.3ggn070M-lkp@intel.com/
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Replace sysctl_user_to_kern_uint_conv function with
SYSCTL_USER_TO_KERN_UINT_CONV macro that accepts u_ptr_op parameter for
value transformation. Replacing sysctl_kern_to_user_uint_conv is not
needed as it will only be used from within sysctl.c. This is a
preparation commit for creating a custom converter in fs/pipe.c. No
Functional changes are intended.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Add k_ptr_range_check parameter to SYSCTL_UINT_CONV_CUSTOM macro to
enable range validation using table->extra1/extra2. Replace
do_proc_douintvec_minmax_conv with do_proc_uint_conv_minmax generated
by the updated macro.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Pass sysctl_{user_to_kern,kern_to_user}_uint_conv (unsigned integer
uni-directional converters) to the new SYSCTL_UINT_CONV_CUSTOM macro
to create do_proc_douintvec_conv's replacement (do_proc_uint_conv).
This is a preparation commit to use the unsigned integer converter from
outside sysctl. No functional change is intended.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Extend the SYSCTL_INT_CONV_CUSTOM macro with a k_ptr_range_check
parameter to conditionally generate range validation code. When enabled,
validation is done against table->extra1 (min) and table->extra2 (max)
bounds before assignment. Add base minmax and ms_jiffies_minmax
converter instances that utilize the range checking functionality.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
New SYSCTL_INT_CONV_CUSTOM macro creates "bi-directional" converters
from a user-to-kernel and a kernel-to-user functions. Replace integer
versions of do_proc_*_conv functions with the ones from the new macro.
Rename "_dointvec_" to just "_int_" as these converters are not applied
to vectors and the "do" is already in the name.
Move the USER_HZ validation directly into proc_dointvec_userhz_jiffies()
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Eight converter functions are created using two new macros
(SYSCTL_USER_TO_KERN_INT_CONV & SYSCTL_KERN_TO_USER_INT_CONV); they are
called from four pre-existing converter functions: do_proc_dointvec_conv
and do_proc_dointvec{,_userhz,_ms}_jiffies_conv. The function names
generated by the macros are differentiated by a string suffix passed as
the first macro argument.
The SYSCTL_USER_TO_KERN_INT_CONV macro first executes the u_ptr_op
operation, then checks for overflow, assigns sign (-, +) and finally
writes to the kernel var with WRITE_ONCE; it always returns an -EINVAL
when an overflow is detected. The SYSCTL_KERN_TO_USER_INT_CONV uses
READ_ONCE, casts to unsigned long, then executes the k_ptr_op before
assigning the value to the user space buffer.
The overflow check is always done against MAX_INT after applying
{k,u}_ptr_op. This approach avoids rounding or precision errors that
might occur when using the inverse operations.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Rename converter parameter to indicate data flow direction: "lvalp" to
"u_ptr" indicating a user space parsed value pointer. "valp" to "k_ptr"
indicating a kernel storage value pointer. This facilitates the
identification of discrepancies between direction (copy to kernel or
copy to user space) and the modified variable. This is a preparation
commit for when the converter functions are exposed to the rest of the
kernel.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Replace the "write" integer parameter with SYSCTL_USER_TO_KERN() and
SYSCTL_KERN_TO_USER() that clearly indicate data flow direction in
sysctl operations.
"write" originates in proc_sysctl.c (proc_sys_{read,write}) and can take
one of two values: "0" or "1" when called from proc_sys_read and
proc_sys_write respectively. When write has a value of zero, data is
"written" to a user space buffer from a kernel variable (usually
ctl_table->data). Whereas when write has a value greater than zero, data
is "written" to an internal kernel variable from a user space buffer.
Remove this ambiguity by introducing macros that clearly indicate the
direction of the "write".
The write mode names in sysctl_writes_mode are left unchanged as these
directly relate to the sysctl_write_strict file in /proc/sys where the
word "write" unambiguously refers to writing to a file.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Remove "__" from __do_proc_do{intvec,uintvec,ulongvec_minmax} internal
functions and delete their corresponding do_proc_do* wrappers. These
indirections are unnecessary as they do not add extra logic nor do they
indicate a layer separation.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Remove superfluous tbl_data param from do_proc_douintvec{,_r,_w}
and __do_proc_do{intvec,uintvec,ulongvec_minmax}. There is no need to
pass it as it is always contained within the ctl_table struct.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
* Replace void* data in the converter functions with a const struct
ctl_table* table as it was only getting forwarding values from
ctl_table->extra{1,2}.
* Remove the void* data in the do_proc_* functions as they already had a
pointer to the ctl_table.
* Remove min/max structures do_proc_do{uint,int}vec_minmax_conv_param;
the min/max values get passed directly in ctl_table.
* Keep min/max initialization in extra{1,2} in proc_dou8vec_minmax.
* The do_proc_douintvec was adjusted outside sysctl.c as it is exported
to fs/pipe.c.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Move enabling and disabling of interrupts around the SIE instruction to
entry code. Enabling interrupts only after the __TI_sie flag has been set
guarantees that the SIE instruction is not executed if an interrupt happens
between enabling interrupts and the execution of the SIE instruction.
Interrupt handlers and machine check handler forward the PSW to the
sie_exit label in such cases.
This is a prerequisite for VIRT_XFER_TO_GUEST_WORK to prevent that guest
context is entered when e.g. a scheduler IPI, indicating that a reschedule
is required, happens right before the SIE instruction, which could lead to
long delays.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Add a signal_exits counter for s390, as exists on arm64, loongarch, mips,
powerpc, riscv and x86.
This is used by kvm_handle_signal_exit(), which we will use when we
later enable CONFIG_VIRT_XFER_TO_GUEST_WORK.
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
The Extended Supported Rates (ESR) IE handling in OnBeacon accessed
*(p + 1 + ielen) and *(p + 2 + ielen) without verifying that these
offsets lie within the received frame buffer. A malformed beacon with
an ESR IE positioned at the end of the buffer could cause an
out-of-bounds read, potentially triggering a kernel panic.
Add a boundary check to ensure that the ESR IE body and the subsequent
bytes are within the limits of the frame before attempting to access
them.
This prevents OOB reads caused by malformed beacon frames.
Signed-off-by: Navaneeth K <knavaneeth786@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Supported Rates IE length from an incoming Association Request frame
was used directly as the memcpy() length when copying into a fixed-size
16-byte stack buffer (supportRate). A malicious station can advertise an
IE length larger than 16 bytes, causing a stack buffer overflow.
Clamp ie_len to the buffer size before copying the Supported Rates IE,
and correct the bounds check when merging Extended Supported Rates to
prevent a second potential overflow.
This prevents kernel stack corruption triggered by malformed association
requests.
Signed-off-by: Navaneeth K <knavaneeth786@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Information Element (IE) parser rtw_get_ie() trusted the length
byte of each IE without validating that the IE body (len bytes after
the 2-byte header) fits inside the remaining frame buffer. A malformed
frame can advertise an IE length larger than the available data, causing
the parser to increment its pointer beyond the buffer end. This results
in out-of-bounds reads or, depending on the pattern, an infinite loop.
Fix by validating that (offset + 2 + len) does not exceed the limit
before accepting the IE or advancing to the next element.
This prevents OOB reads and ensures the parser terminates safely on
malformed frames.
Signed-off-by: Navaneeth K <knavaneeth786@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Previously, VRAM TTM resource manager debugfs entries (vram0_mm / vram1_mm)
were created globally in the XE debugfs root directory. But technically,
each tile has an associated VRAM TTM manager, which it can own.
Let's create VRAM memory manager debugfs entries directly under each tile's
debugfs directory for better alignment with the per-tile memory layout.
Signed-off-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patch.msgid.link/20251127073643.144379-1-piotr.piorkowski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
pf_descriptor_init currently returns a size_t, which is an unsigned
integer data type. This conflicts with it returning a negative errno
value on failure.
Make it return an int instead. This mirrors how pf_trailer_init is used
later.
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Alex Zuo <alex.zuo@intel.com>
Link: https://patch.msgid.link/20251117190114.69953-2-jonathan.cavitt@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
This code doesn't run. Since 2008:
4f9c11dd49 ("x86, 64-bit: adjust mapping of physical pagetables to work with Xen")
the kernel has gained more flexible logging and tracing capabilities;
presumably if anyone wanted to take advantage of this log message they would
have got rid of the "if (0)" so they could use these capabilities.
Since they haven't, just delete it.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20251003-x86-init-cleanup-v1-1-f2b7994c2ad6@google.com
This commit updates the initialization for the "srcu-fast" scale
type to use DEFINE_STATIC_SRCU_FAST() when reader_flavor is equal to
SRCU_READ_FLAVOR_FAST.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: <bpf@vger.kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
This commit causes rcutorture's srcu_torture_init() and
srcud_torture_init() functions to announce on the console log
which variant of SRCU is being tortured, for example: "torture:
srcud_torture_init fast SRCU".
[ paulmck: Apply feedback from kernel test robot. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
This commit creates an SRCU-fast-updown API, including
DEFINE_SRCU_FAST_UPDOWN(), DEFINE_STATIC_SRCU_FAST_UPDOWN(),
__init_srcu_struct_fast_updown(), init_srcu_struct_fast_updown(),
srcu_read_lock_fast_updown(), srcu_read_unlock_fast_updown(),
__srcu_read_lock_fast_updown(), and __srcu_read_unlock_fast_updown().
These are initially identical to their SRCU-fast counterparts, but both
SRCU-fast and SRCU-fast-updown will be optimized in different directions
by later commits. SRCU-fast will lack any sort of srcu_down_read() and
srcu_up_read() APIs, which will enable extremely efficient NMI safety.
For its part, SRCU-fast-updown will not be NMI safe, which will enable
reasonably efficient implementations of srcu_down_read_fast() and
srcu_up_read_fast().
This API fork happens to meet two different future use cases.
* SRCU-fast will become the reimplementation basis for RCU-TASK-TRACE
for consolidation. Since RCU-TASK-TRACE must be NMI safe, SRCU-fast
must be as well.
* SRCU-fast-updown will be needed for uretprobes code in order to get
rid of the read-side memory barriers while still allowing entering the
reader at task level while exiting it in a timer handler.
This commit also adds rcutorture tests for the new APIs. This
(annoyingly) needs to be in the same commit for bisectability. With this
commit, the 0x8 value tests SRCU-fast-updown. However, most SRCU-fast
testing will be via the RCU Tasks Trace wrappers.
[ paulmck: Apply s/0x8/0x4/ missing change per Boqun Feng feedback. ]
[ paulmck: Apply Akira Yokosawa feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <bpf@vger.kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
In Store and Forward mode, flushing frames when the receive buffer is
unavailable, can cause the MTL Rx FIFO to go out of sync. This results
in buffering of a few frames in the FIFO without triggering Rx DMA
from transferring the data to the system memory until another packet
is received. Once the issue happens, for a ping request, the packet is
forwarded to the system memory only after we receive another packet
and hece we observe a latency equivalent to the ping interval.
64 bytes from 192.168.2.100: seq=1 ttl=64 time=1000.344 ms
Also, we can observe constant gmacgrp_debug register value of
0x00000120, which indicates "Reading frame data".
The issue is not reproducible after disabling frame flushing when Rx
buffer is unavailable. But in that case, the Rx DMA enters a suspend
state due to buffer unavailability. To resume operation, software
must write to the receive_poll_demand register after adding new
descriptors, which reactivates the Rx DMA.
This issue is observed in the socfpga platforms which has dwmac1000 IP
like Arria 10, Cyclone V and Agilex 7. Issue is reproducible after
running iperf3 server at the DUT for UDP lower packet sizes.
Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20251126-a10_ext_fix-v1-1-d163507f646f@altera.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Replace mutex_init() with the devm_mutex_init(), to ensure proper mutex
cleanup during probe failure and driver removal.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20251119085813.546813-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Define a new macro BIOS_INPUTS_MAX, to represent the maximum number of
BIOS input values. Replace hardcoded array sizes in relevant structures
with this macro to improve readability and maintainability.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20251119085813.546813-1-Shyam-sundar.S-k@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
gcc 13, in some cases, gets confused if the __builtin_constant_p() is
inside the switch. It thinks that bitnr can have the value max+1 and
fails. Lift the check outside the switch to avoid it.
Fixes: ef7bfe5bbf ("iommupt/x86: Support SW bits and permit PT_FEAT_DMA_INCOHERENT")
Fixes: 5448c1558f ("iommupt: Add the Intel VT-d second stage page table format")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202511242012.I7g504Ab-lkp@intel.com/
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Add dt-bindings documentation of SPI NAND controller
for Airoha EN7523 SoC platform.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251125234047.1101985-3-mikhail.kshevetskiy@iopsys.eu
Signed-off-by: Mark Brown <broonie@kernel.org>
Airoha EN7523 specific bug
--------------------------
We found that some serial console may pull TX line to GROUND during board
boot time. Airoha uses TX line as one of its bootstrap pins. On the EN7523
SoC this may lead to booting in RESERVED boot mode.
It was found that some flashes operates incorrectly in RESERVED mode.
Micron and Skyhigh flashes are definitely affected by the issue,
Winbond flashes are not affected.
Details:
--------
DMA reading of odd pages on affected flashes operates incorrectly. Page
reading offset (start of the page) on hardware level is replaced by 0x10.
Thus results in incorrect data reading. As result OS loading becomes
impossible.
Usage of UBI make things even worse. On attaching, UBI will detects
corruptions (because of wrong reading of odd pages) and will try to
recover. For recovering UBI will erase and write 'damaged' blocks with
a valid information. This will destroy all UBI data.
Non-DMA reading is OK.
This patch detects booting in reserved mode, turn off DMA and print big
fat warning.
It's worth noting that the boot configuration is preserved across reboots.
Therefore, to boot normally, you should do the following:
- disconnect the serial console from the board,
- power cycle the board.
Fixes: a403997c12 ("spi: airoha: add SPI-NAND Flash controller driver")
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://patch.msgid.link/20251125234047.1101985-2-mikhail.kshevetskiy@iopsys.eu
Signed-off-by: Mark Brown <broonie@kernel.org>
Use kvzalloc() instead of kzalloc() to allocate memory to cache the
content of a firmware control.
Most firmware controls are only small, typically a few bytes. But on
some firmware there can be much larger controls for coefficient or
model data.
The overhead of kvzalloc() is negligible because most control allocs
can be satisfied by the normal kmalloc() that kvzalloc() will try first.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127103947.1094934-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In cs_dsp_debugfs_read_controls_show() take the pwr_lock mutex
around the list walk. This protects against debugfs returning
a partial set of new controls if those controls are being added
to the list while it is being walked.
Controls are never deleted from this list, and are only added to
the end of the list. So there was never a danger of following a
stale pointer to garbage.
The worst case was that the printed list is truncated if it saw an
entry that was the list end just before a new entry was appended to
the list.
With the original code, the truncated list from the debugfs could
show only _some_ of the new entries. This could be confusing because
it appears that some new entries are missing.
Adding the mutex means that the debugfs read provides an atomic view.
Either it shows the old content before any of the new controls were
added; or it shows the new content after all the new controls are
added.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127113238.1251352-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Even if something goes wrong when performing suspend on DSP, from the
system perspective the component is not critical enough to block the
suspend operation entirely. Leaving recovery to next resume() suffices.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20251126095523.3925364-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
