The u-blox company name is written in lowercase so restore the style
that was used before the binding was converted to YAML.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
The RESET_N and SAFEBOOT_N pins should typically be left open and only
be connected to ground in rare cases where a device is misbehaving.
Specify GPIO_OPEN_DRAIN in the example as this is what should generally
be used.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
U-Blox M8/M9 chip have a pin to start it in safeboot mode, to be used
to recover from situations where the flash content has become
corrupted and needs to be restored. If this pin is asserted at power
up/reset, the receiver starts in safeboot mode and GNSS operation is
disabled.
Deassert the safeboot pin when probing this driver.
Signed-off-by: Alejandro Enrique <alejandroe1@geotab.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250911-ubx-safeboot-v3-2-32fe6b882a3c@geotab.com
[ johan: deassert after requesting supplies ]
Signed-off-by: Johan Hovold <johan@kernel.org>
This hardware block amongst other things includes a multiplexer for a
high-speed Combo-Phy. This binding allows exposing the multiplexer
Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251115-openwrt-one-network-v4-1-48cbda2969ac@collabora.com
Signed-off-by: Lee Jones <lee@kernel.org>
tk_aux_sysfs_init() returns immediately on error during the auxiliary clock
initialization loop without cleaning up previously allocated kobjects and
sysfs groups.
If kobject_create_and_add() or sysfs_create_group() fails during loop
iteration, the parent kobjects (tko and auxo) and any previously created
child kobjects are leaked.
Fix this by adding proper error handling with goto labels to ensure all
allocated resources are cleaned up on failure. kobject_put() on the
parent kobjects will handle cleanup of their children.
Fixes: 7b95663a3d ("timekeeping: Provide interface to control auxiliary clocks")
Signed-off-by: Malaya Kumar Rout <mrout@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251120150213.246777-1-mrout@redhat.com
During connect(), acting on a signal/timeout by disconnecting an already
established socket leads to several issues:
1. connect() invoking vsock_transport_cancel_pkt() ->
virtio_transport_purge_skbs() may race with sendmsg() invoking
virtio_transport_get_credit(). This results in a permanently elevated
`vvs->bytes_unsent`. Which, in turn, confuses the SOCK_LINGER handling.
2. connect() resetting a connected socket's state may race with socket
being placed in a sockmap. A disconnected socket remaining in a sockmap
breaks sockmap's assumptions. And gives rise to WARNs.
3. connect() transitioning SS_CONNECTED -> SS_UNCONNECTED allows for a
transport change/drop after TCP_ESTABLISHED. Which poses a problem for
any simultaneous sendmsg() or connect() and may result in a
use-after-free/null-ptr-deref.
Do not disconnect socket on signal/timeout. Keep the logic for unconnected
sockets: they don't linger, can't be placed in a sockmap, are rejected by
sendmsg().
[1]: https://lore.kernel.org/netdev/e07fd95c-9a38-4eea-9638-133e38c2ec9b@rbox.co/
[2]: https://lore.kernel.org/netdev/20250317-vsock-trans-signal-race-v4-0-fc8837f3f1d4@rbox.co/
[3]: https://lore.kernel.org/netdev/60f1b7db-3099-4f6a-875e-af9f6ef194f6@rbox.co/
Fixes: d021c34405 ("VSOCK: Introduce VM Sockets")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251119-vsock-interrupted-connect-v2-1-70734cf1233f@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
be_insert_vlan_in_pkt() is called with the wrb_params argument being NULL
at be_send_pkt_to_bmc() call site. This may lead to dereferencing a NULL
pointer when processing a workaround for specific packet, as commit
bc0c3405ab ("be2net: fix a Tx stall bug caused by a specific ipv6
packet") states.
The correct way would be to pass the wrb_params from be_xmit().
Fixes: 760c295e0e ("be2net: Support for OS2BMC.")
Cc: stable@vger.kernel.org
Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru>
Link: https://patch.msgid.link/20251119105015.194501-1-a.vatoropin@crpt.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add an auxiliary (aux) device to support RoCE. The base driver is
responsible for creating the auxiliary device and allocating the
required resources to it, which will be owned by the bnge RoCE
driver in future patches.
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Link: https://patch.msgid.link/20251117171136.128193-2-siva.kallam@broadcom.com
Reviewed-by: Siva Reddy Kallam <siva.kallam@broadcom.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Simplify the loop looking up a candidate idle state in the case when an
intercept is likely to occur by adding a search for the state index limit
if the tick is stopped before it.
First, call tick_nohz_tick_stopped() just once and if it returns true,
look for the shallowest state index below the current candidate one with
target residency at least equal to the tick period length.
Next, simply look for a state that is not shallower than the one found
in the previous step and satisfies the intercepts majority condition (if
there are no such states, the shallowest state that is not shallower
than the one found in the previous step becomes the new candidate).
Since teo_state_ok() has no callers any more after the above changes,
drop it.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
[ rjw: Changelog clarification and code comment edit ]
Link: https://patch.msgid.link/2418792.ElGaqSPkdT@rafael.j.wysocki
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Driver is not creating the debugfs hooks for CQ coalesc parameters
because of a wrong check. Fixed the condition check inside
bnxt_re_init_cq_coal_debugfs().
Fixes: cf27490790 ("RDMA/bnxt_re: Add a debugfs entry for CQE coalescing tuning")
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20251117061306.1140588-1-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Bean Huo <beanhuo@iokpp.de> says:
This patch series introduces OP-TEE based RPMB (Replay Protected
Memory Block) support for UFS devices, extending the kernel-level
secure storage capabilities that are currently available for eMMC
devices.
Previously, OP-TEE required a userspace supplicant to access RPMB
partitions, which created complex dependencies and reliability issues,
especially during early boot scenarios. Recent work by Linaro has
moved core supplicant functionality directly into the Linux kernel for
eMMC devices, eliminating userspace dependencies and enabling
immediate secure storage access. This series extends the same approach
to UFS devices, which are used in enterprise and mobile applications
that require secure storage capabilities.
Benefits:
- Eliminates dependency on userspace supplicant for UFS RPMB access
- Enables early boot secure storage access (e.g., fTPM, secure UEFI
variables)
- Provides kernel-level RPMB access as soon as UFS driver is
initialized
- Removes complex initramfs dependencies and boot ordering
requirements
- Ensures reliable and deterministic secure storage operations
- Supports both built-in and modular fTPM configurations.
Prerequisites:
--------------
This patch series depends on commit 7e8242405b ("rpmb: move struct
rpmb_frame to common header") which has been merged into mainline
v6.18-rc2.
Link: https://patch.msgid.link/20251107230518.4060231-1-beanhuo@iokpp.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some users of KVM have emulated devices (typically added to private
forks of QEMU) that execute AVX instructions on PCI BARs. Whenever
the guest OS tries to do that, an illegal instruction exception or
emulation failure is triggered.
Add the Avx flag to move instructions:
- (66) 0f 10 - MOVUPS/MOVUPD from memory
- (66) 0f 11 - MOVUPS/MOVUPD to memory
- 66 0f 6f - MOVDQA from memory
- 66 0f 7f - MOVDQA to memory
- f3 0f 6f - MOVDQU from memory
- f3 0f 7f - MOVDQU to memory
- (66) 0f 28 - MOVAPS/MOVAPD from memory
- (66) 0f 29 - MOVAPS/MOVAPD to memory
- (66) 0f 2b - MOVNTPS/MOVNTPD to memory
- 66 0f e7 - MOVNTDQ to memory
- 66 0f 38 2a - MOVNTDQA to memory
Co-developed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/kvm/BD108C42-0382-4B17-B601-434A4BD038E7@fb.com/T/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://patch.msgid.link/20251114003633.60689-11-pbonzini@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The PWM signal from the LPG channel can be routed to PMIC GPIOs with
proper GPIO configuration, and it is not necessary to enable the
TRILED channel in that case. This also applies to the LPG channels
that mapped to TRILED channels. Additionally, enabling the TRILED
channel unnecessarily would cause a voltage increase in its power
supply. Hence remove it.
Fixes: 24e2d05d1b ("leds: Add driver for Qualcomm LPG")
Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://patch.msgid.link/20251119-lpg_triled_fix-v3-2-84b6dbdc774a@oss.qualcomm.com
Signed-off-by: Lee Jones <lee@kernel.org>
LPG channels can be used for only outputting PWM signals by routing to
PMIC GPIOs without enabling TRILED. Explain this usage in the description
for better clarity.
Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://patch.msgid.link/20251119-lpg_triled_fix-v3-1-84b6dbdc774a@oss.qualcomm.com
Signed-off-by: Lee Jones <lee@kernel.org>
min_t(unsigned int, a, b) casts an 'unsigned long' to 'unsigned int'.
Use min(a, b) instead as it promotes any 'unsigned int' to 'unsigned long'
and so cannot discard significant bits.
In this case the 'unsigned long' value is small enough that the result
is ok.
Detected by an extra check added to min_t().
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
The 'leds' node is missing constraints on additional properties. It is
mixing 'leds' node and child node properties as well as missing some
properties. Add the 'led@' child nodes and the missing properties.
Fixes: 1160f9f88b ("dt-bindings: mfd: fsl,mc13xxx: Convert txt to DT schema")
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251118213541.43812-1-robh@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
min_t(unsigned int, a, b) casts an 'unsigned long' to 'unsigned int'.
Use min(a, b) instead as it promotes any 'unsigned int' to 'unsigned long'
and so cannot discard significant bits.
In this case the 'unsigned long' value is small enough that the result
is ok.
(Similarly for max_t() and clamp_t().)
Detected by an extra check added to min_t().
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Gal Pressman says:
====================
YNL CLI --list-attrs argument
While experimenting with the YNL CLI, I found the process of going back
and forth to examine the YAML spec files in order to figure out how to
use each command quite tiring.
The addition of --list-attrs helps by providing all information needed
directly in the tool. I figured others would likely find it useful as
well.
v1: https://lore.kernel.org/all/20251116192845.1693119-1-gal@nvidia.com/
====================
Link: https://patch.msgid.link/20251118143208.2380814-1-gal@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Enhance the --list-attrs option to recursively display nested attributes
instead of just showing "nest" as the type.
Nested attributes now show their attribute set name and expand to
display their contents.
# ./cli.py --family ethtool --list-attrs rss-get
[..]
Do request attributes:
- header: nest -> header
- dev-index: u32
- dev-name: string
- flags: u32 (enum: header-flags)
- phy-index: u32
- context: u32
[..]
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20251118143208.2380814-3-gal@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a --list-attrs option to the YNL CLI that displays information about
netlink operations, including request and reply attributes.
This eliminates the need to manually inspect YAML spec files to
determine the JSON structure required for operations, or understand the
structure of the reply.
Example usage:
# ./cli.py --family netdev --list-attrs dev-get
Operation: dev-get
Get / dump information about a netdev.
Do request attributes:
- ifindex: u32
netdev ifindex
Do reply attributes:
- ifindex: u32
netdev ifindex
- xdp-features: u64 (enum: xdp-act)
Bitmask of enabled xdp-features.
- xdp-zc-max-segs: u32
max fragment count supported by ZC driver
- xdp-rx-metadata-features: u64 (enum: xdp-rx-metadata)
Bitmask of supported XDP receive metadata features. See Documentation/networking/xdp-rx-metadata.rst for more details.
- xsk-features: u64 (enum: xsk-flags)
Bitmask of enabled AF_XDP features.
Dump reply attributes:
- ifindex: u32
netdev ifindex
- xdp-features: u64 (enum: xdp-act)
Bitmask of enabled xdp-features.
- xdp-zc-max-segs: u32
max fragment count supported by ZC driver
- xdp-rx-metadata-features: u64 (enum: xdp-rx-metadata)
Bitmask of supported XDP receive metadata features. See Documentation/networking/xdp-rx-metadata.rst for more details.
- xsk-features: u64 (enum: xsk-flags)
Bitmask of enabled AF_XDP features.
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20251118143208.2380814-2-gal@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The zloop driver advertises REQ_NOWAIT support through BLK_FEAT_NOWAIT
(enabled by default for all blk-mq devices), and honors the nowait
behavior throughout zloop_queue_rq().
However, actual I/O to the backing file is performed in a workqueue,
where blocking is allowed.
To avoid imposing unnecessary non-blocking constraints in this blocking
context, clear the REQ_NOWAIT flag before processing the request in the
workqueue context.
Signed-off-by: Chaitanya Kulkarni <ckulkarnilinux@gmail.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The loop driver advertises REQ_NOWAIT support through BLK_FEAT_NOWAIT
(enabled by default for all blk-mq devices), and honors the nowait
behavior throughout loop_queue_rq().
However, actual I/O to the backing file is performed in a workqueue,
where blocking is allowed.
To avoid imposing unnecessary non-blocking constraints in this blocking
context, clear the REQ_NOWAIT flag before processing the request in the
workqueue context.
Signed-off-by: Chaitanya Kulkarni <ckulkarnilinux@gmail.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since commit d8c8a575f5 ("kbuild: Ensure .dtbo targets are applied to
a base .dtb") kbuild will throw a warning for any stray overlays. Add a
new .dtb which will only be build if CONFIG_OF_ALL_DTBS is enabled.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Link: https://patch.msgid.link/20251120080138.2397851-1-mwalle@kernel.org
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Add missing PHYTEC overlay build targets so they are included in
CONFIG_OF_ALL_DTBS coverage. This ensures all PHYTEC board-overlay
combinations are apply-tested during build time testing.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://patch.msgid.link/20251119123216.1481420-1-w.egorov@phytec.de
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Convert the Renesas R-Car Gen3 thermal driver from SIMPLE_DEV_PM_OPS()
to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr(). This lets us drop the
__maybe_unused annotation from its resume callback, and reduces kernel
size in case CONFIG_PM or CONFIG_PM_SLEEP is disabled.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://patch.msgid.link/813ad36fdc8561cf1c396230436e8ff3ff903a1f.1763117455.git.geert+renesas@glider.be
When reading the fdt_size value, the argument passed to dt_mem_next_cell()
is dt_root_addr_cells, but it should be dt_root_size_cells.
The same issue occurs when reading the scratch_size value.
Use a helper function to simplify the code and fix these issues.
Fixes: 274cdcb1c0 ("arm64: add KHO support")
Signed-off-by: Yuntao Wang <yuntao.wang@linux.dev>
Link: https://patch.msgid.link/20251115134753.179931-5-yuntao.wang@linux.dev
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The len value is in bytes, while `dt_root_addr_cells + dt_root_size_cells`
is in cells (4 bytes per cell). Modulo calculation between them is
incorrect, the units must be converted first.
Use helper functions to simplify the code and fix this issue.
Fixes: fb319e77a0 ("of: fdt: Add memory for devices by DT property "linux,usable-memory-range"")
Fixes: 2af2b50acf ("of: fdt: Add generic support for handling usable memory range property")
Fixes: 8f579b1c4e ("arm64: limit memory regions based on DT property, usable-memory-range")
Signed-off-by: Yuntao Wang <yuntao.wang@linux.dev>
Link: https://patch.msgid.link/20251115134753.179931-4-yuntao.wang@linux.dev
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The len value is in bytes, while `dt_root_addr_cells + dt_root_size_cells`
is in cells (4 bytes per cell). Comparing them directly is incorrect.
Use a helper function to simplify the code and address this issue.
Fixes: f7e7ce93aa ("of: fdt: Add generic support for handling elf core headers property")
Fixes: e62aaeac42 ("arm64: kdump: provide /proc/vmcore file")
Signed-off-by: Yuntao Wang <yuntao.wang@linux.dev>
Link: https://patch.msgid.link/20251115134753.179931-3-yuntao.wang@linux.dev
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Currently, there are many pieces of nearly identical code scattered across
different places. Consolidate the duplicate code into helper functions to
improve maintainability and reduce the likelihood of errors.
Signed-off-by: Yuntao Wang <yuntao.wang@linux.dev>
Link: https://patch.msgid.link/20251115134753.179931-2-yuntao.wang@linux.dev
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Convert the Renesas R-Car thermal driver from SIMPLE_DEV_PM_OPS() to
DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr(). This lets us drop the
check for CONFIG_PM_SLEEP, and reduces kernel size in case CONFIG_PM or
CONFIG_PM_SLEEP is disabled, while increasing build coverage.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://patch.msgid.link/ee03ec71d10fd589e7458fa1b0ada3d3c19dbb54.1763117351.git.geert+renesas@glider.be
There's nothing special about RGB multi-led instances. Allow any color
combinations by simply extending the "if _RGB" checks.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: David Heidelberg <david@ixit.cz>
Link: https://patch.msgid.link/20251117-topic-lpg_multi-v1-1-05604374a2dd@oss.qualcomm.com
Signed-off-by: Lee Jones <lee@kernel.org>
The Surface Pro 2 and 3 have a strange headphone frequency response
and miss most of the bass. I discovered connecting the HP out to the
main DAC fixes this. Maybe the other is mono or intentionally filtered
signal for the built-in speakers? (At least the Lenovo Ideapad 720S
(AMD) (0x17aa, 0x3812) exhibited the same problem, but I don't have it
anymore for testing V2 changes.)
Signed-off-by: René Rebe <rene@exactco.de>
Co-developed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251120.124240.139462482701146043.rene@exactco.de
Meghana Malladi says:
====================
Add AF_XDP zero copy support
This series adds AF_XDP zero coppy support to icssg driver.
Tests were performed on AM64x-EVM with xdpsock application [1].
A clear improvement is seen Transmit (txonly) and receive (rxdrop)
for 64 byte packets. 1500 byte test seems to be limited by line
rate (1G link) so no improvement seen there in packet rate
Having some issue with l2fwd as the benchmarking numbers show 0
for 64 byte packets after forwading first batch packets and I am
currently looking into it.
AF_XDP performance using 64 byte packets in Kpps.
AF_XDP performance using 64 byte packets in Kpps.
Benchmark: XDP-SKB XDP-Native XDP-Native(ZeroCopy)
rxdrop 253 473 656
txonly 350 354 855
l2fwd 178 240 0
AF_XDP performance using 1500 byte packets in Kpps.
Benchmark: XDP-SKB XDP-Native XDP-Native(ZeroCopy)
rxdrop 82 82 82
txonly 81 82 82
l2fwd 81 82 82
[1]: https://github.com/xdp-project/bpf-examples/tree/master/AF_XDP-example
v5: https://lore.kernel.org/all/20251111101523.3160680-1-m-malladi@ti.com/
====================
Link: https://patch.msgid.link/20251118135542.380574-1-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Enable the zero copy feature flag in xdp_set_features_flag()
for a given ndev to get the AF-XDP zero copy support running
for both Tx and Rx.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Link: https://patch.msgid.link/20251118135542.380574-7-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use xsk_pool inside rx_chn to check if a given Rx queue id
is registered for xsk zero copy, which gets populated during
xsk enable.
Update prueth_create_xdp_rxqs to register and support two different
memory models (xsk and page) for a given Rx queue, if registered for
zero copy.
If xsk_pool is registered, allocate buffers from UMEM and map them
to the hardware Rx descriptors. In NAPI context, run the XDP program
for each packet and process the xsk buffer according to the XDP
result codes. Also allocate new set of buffers from UMEM for the
next batch of NAPI Rx processing. Add XDK_WAKEUP_RX support to support
xsk wakeup for Rx.
Move prueth_create_page_pool to prueth_init_rx_chns to avoid freeing
and re-allocating the system memory every time there is a transition
from zero copy to copy and prevents any type of memory fragmentation
or leak.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Link: https://patch.msgid.link/20251118135542.380574-6-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
emac_run_xdp function runs xdp program, at a given hook point
in the Rx path of the driver in NAPI context and returns
XDP return codes. In zero copy mode the driver receives
packets using UMEM frames instead of pages (native XDP).
Decouple the usage of page in this function.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Link: https://patch.msgid.link/20251118135542.380574-5-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use xsk_pool inside tx_chn to check if a given Tx queue id
is registered for xsk zero copy, which gets populated during
xsk enable
If xsk_pool is set, get frames from the pool in NAPI
context and submit them to the Tx channel. Tx completion
is also handled in the NAPI context.
Use PRUETH_SWDATA_XSK to recycle xsk buffers back to the
umem pool. Add XDP_WAKEUP_TX support to enable xsk_wakeup
for Tx.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Link: https://patch.msgid.link/20251118135542.380574-4-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Implement XSK NDOs (setup, wakeup) and create XSK
Rx and Tx queues. xsk_qid stores the queue id for
a given port which has been registered for zero copy
AF_XDP and used to acquire UMEM pointer if registered.
Based on the xsk_qid and the xsk_pool (umem) the driver
is either in copy or zero copy mode. In case of copy mode
the xsk_qid value will be invalid and will be set to valid
queue id when enabling zero copy. To enable zero copy, the
Rx queues are destroyed, i.e., descriptors pushed to fq
and cq are freed to remap them to xdp buffers from the umem.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Link: https://patch.msgid.link/20251118135542.380574-3-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Each port for a given ICSSG instance has their own set of
Tx and Rx queues. Add functions to create and destroy these
queues, which will be further used while performing ndo_bpf
operations to set up XSK Tx/Rx queues for a given port.
In the destroy Rx queue sequence add teardown wait to ensure
that all the descriptors including the TDCM (teardown completion
marker) have been serviced and freed to avoid any sort of descriptor
leaks.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Link: https://patch.msgid.link/20251118135542.380574-2-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If devm_request_threaded_irq() fails after irq_domain_add_linear()
succeeds in mt6358_irq_init(), the function returns without removing
the created IRQ domain, leading to a resource leak.
Call irq_domain_remove() in the error path after a successful
irq_domain_add_linear() to properly release the IRQ domain.
Fixes: 2b91c28f2a ("mfd: Add support for the MediaTek MT6358 PMIC")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20251118121427.583-1-vulab@iscas.ac.cn
Signed-off-by: Lee Jones <lee@kernel.org>
If devm_request_threaded_irq() fails after irq_domain_create_linear()
succeeds in mt6397_irq_init(), the function returns without removing
the created IRQ domain, leading to a resource leak.
Call irq_domain_remove() in the error path after a successful
irq_domain_create_linear() to properly release the IRQ domain.
Fixes: a4872e80ce ("mfd: mt6397: Extract IRQ related code from core driver")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20251118121500.605-1-vulab@iscas.ac.cn
Signed-off-by: Lee Jones <lee@kernel.org>
The sfrbu on both sama7g5 and sama6d65 both fall back to sama5d2 in
devicetrees, but the former two compatibles were undocumented. Now that
syscon.yaml has easy support for multiple soc-specific compatibles, add
both of these undocumented devices.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251117-marlin-mustang-5ffda4d211c7@spud
Signed-off-by: Lee Jones <lee@kernel.org>
On pic64gx these syscons are identical to those on mpfs, and should use
a fallback. Add support for multiple fallback compatibles to syscon.yaml
with these as the first two users.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251117-aeration-smock-5e7ac06e2942@spud
Signed-off-by: Lee Jones <lee@kernel.org>
