Power domains and resets should be required for PCI, so the proper SoC
supplies are turned on.
Fixes: 692eadd516 ("dt-bindings: PCI: qcom: Document the X1E80100 PCIe Controller")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251030-dt-bindings-pci-qcom-fixes-power-domains-v2-9-28c1f11599fe@linaro.org
Commit b8d3404058 ("dt-bindings: PCI: qcom,pcie-sm8550: Move SM8550 to
dedicated schema") move the device schema to separate file, but it
missed a "if:not:...then:" clause in the original binding which was
requiring power-domains and resets for this particular chip.
Fixes: b8d3404058 ("dt-bindings: PCI: qcom,pcie-sm8550: Move SM8550 to dedicated schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251030-dt-bindings-pci-qcom-fixes-power-domains-v2-8-28c1f11599fe@linaro.org
Commit 88c9b3af4e ("dt-bindings: PCI: qcom,pcie-sm8450: Move SM8450 to
dedicated schema") move the device schema to separate file, but it
missed a "if:not:...then:" clause in the original binding which was
requiring power-domains and resets for this particular chip.
Fixes: 88c9b3af4e ("dt-bindings: PCI: qcom,pcie-sm8450: Move SM8450 to dedicated schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251030-dt-bindings-pci-qcom-fixes-power-domains-v2-7-28c1f11599fe@linaro.org
Commit 2278b8b547 ("dt-bindings: PCI: qcom,pcie-sm8350: Move SM8350 to
dedicated schema") move the device schema to separate file, but it
missed a "if:not:...then:" clause in the original binding which was
requiring power-domains and resets for this particular chip.
Fixes: 2278b8b547 ("dt-bindings: PCI: qcom,pcie-sm8350: Move SM8350 to dedicated schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251030-dt-bindings-pci-qcom-fixes-power-domains-v2-6-28c1f11599fe@linaro.org
Commit 4891b66185 ("dt-bindings: PCI: qcom,pcie-sm8250: Move SM8250 to
dedicated schema") move the device schema to separate file, but it
missed a "if:not:...then:" clause in the original binding which was
requiring power-domains and resets for this particular chip.
Fixes: 4891b66185 ("dt-bindings: PCI: qcom,pcie-sm8250: Move SM8250 to dedicated schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251030-dt-bindings-pci-qcom-fixes-power-domains-v2-5-28c1f11599fe@linaro.org
Commit 51bc04d5b4 ("dt-bindings: PCI: qcom,pcie-sm8150: Move SM8150 to
dedicated schema") move the device schema to separate file, but it
missed a "if:not:...then:" clause in the original binding which was
requiring power-domains and resets for this particular chip.
Fixes: 51bc04d5b4 ("dt-bindings: PCI: qcom,pcie-sm8150: Move SM8150 to dedicated schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251030-dt-bindings-pci-qcom-fixes-power-domains-v2-4-28c1f11599fe@linaro.org
Commit c007a55055 ("dt-bindings: PCI: qcom,pcie-sc8280xp: Move
SC8280XP to dedicated schema") move the device schema to separate file,
but it missed a "if:not:...then:" clause in the original binding which
was requiring power-domains and resets for this particular chip.
Fixes: c007a55055 ("dt-bindings: PCI: qcom,pcie-sc8280xp: Move SC8280XP to dedicated schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251030-dt-bindings-pci-qcom-fixes-power-domains-v2-3-28c1f11599fe@linaro.org
Commit 756485bfbb ("dt-bindings: PCI: qcom,pcie-sc7280: Move SC7280 to
dedicated schema") move the device schema to separate file, but it
missed a "if:not:...then:" clause in the original binding which was
requiring power-domains and resets for this particular chip.
Fixes: 756485bfbb ("dt-bindings: PCI: qcom,pcie-sc7280: Move SC7280 to dedicated schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251030-dt-bindings-pci-qcom-fixes-power-domains-v2-2-28c1f11599fe@linaro.org
Commit 544e8f96ef ("dt-bindings: PCI: qcom,pcie-sa8775p: Move SA8775p
to dedicated schema") move the device schema to separate file, but it
missed a "if:not:...then:" clause in the original binding which was
requiring power-domains and resets for this particular chip.
Fixes: 544e8f96ef ("dt-bindings: PCI: qcom,pcie-sa8775p: Move SA8775p to dedicated schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251030-dt-bindings-pci-qcom-fixes-power-domains-v2-1-28c1f11599fe@linaro.org
Commit 38b7cc448a ("gpu: nova-core: implement Display for Spec") in
drm-rust-next introduced some usage of the Display trait, but the
Display trait is being modified in the rust tree this cycle. Thus, to
avoid conflicts with the Rust tree, tweak how the formatting machinery
is used in a way where it works both with and without the changes in the
Rust tree.
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20251117-nova-fmt-rust-v1-1-651ca28cd98f@google.com
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Update qspi flash partitions to support Remote System Update (RSU).
Signed-off-by: Niravkumar L Rabara <niravkumarlaxmidas.rabara@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Same recipes as PTL for NVL-S from the Nova Lake family.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251104121650.21872-7-peter.ujfalusi@linux.intel.com
Add support for Nova Lake S (NVL-S).
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251104121650.21872-6-peter.ujfalusi@linux.intel.com
Add rt722 on SDW link 3 support
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251104121650.21872-5-peter.ujfalusi@linux.intel.com
For now the tables are basic for mockup devices
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251104121650.21872-4-peter.ujfalusi@linux.intel.com
Add HDMI codec ID for Intel Nova Lake platform.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251104121650.21872-3-peter.ujfalusi@linux.intel.com
Add Nova Lake S (NVL-S) audio Device ID
The ID will be used by HDA legacy, SOF audio stack and the driver
to determine which audio stack should be used (intel-dsp-config).
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251104121650.21872-2-peter.ujfalusi@linux.intel.com
With commit 1204777867 ("s390/debug: keep debug data on resize")
the behavior of a debug area resize operation was changed. Update the
associated documentation to reflect this change.
Fixes: 1204777867 ("s390/debug: keep debug data on resize")
Reported-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
This adds support for ESMT F50L1G41LC, which appears to be an updated
version of the already supported F50L1G41LB.
Add esmt_8c SPI_NAND manufacturer to account for the newly used vendor
ID with support for the ESMT F50L1G41LC chip.
Link: https://github.com/openwrt/openwrt/pull/15214#issuecomment-3514824435
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The initial fix for a GPIO descriptor leak added manual gpiod_put()
calls in the error path and remove function.
This follow-up patch improves upon the fix by switching to the
resource-managed devm_gpiod_get_optional() API.
Suggested-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Commit 5c2f7727d4 ("mtd: mtdpart: check for subpartitions parsing
result") introduced some kind of regression with parser on subpartitions
where if a parser emits an error then the entire parsing process from the
upper parser fails and partitions are deleted.
Not checking for error in subpartitions was originally intended as
special parser can emit error also in the case of the partition not
correctly init (for example a wiped partition) or special case where the
partition should be skipped due to some ENV variables externally
provided (from bootloader for example)
One example case is the TRX partition where, in the context of a wiped
partition, returns a -ENOENT as the trx_magic is not found in the
expected TRX header (as the partition is wiped)
To better handle this and still keep some kind of error tracking (for
example to catch -ENOMEM errors or -EINVAL errors), permit parser on
subpartition to emit -ENOENT error, print a debug log and skip them
accordingly.
This results in giving better tracking of the status of the parser
(instead of returning just 0, dropping any kind of signal that there is
something wrong with the parser) and to some degree restore the original
logic of the subpartitions parse.
(worth to notice that some special partition might have all the special
header present for the parser and declare 0 partition in it, this is why
it would be wrong to simply return 0 in the case of a special partition
that is NOT init for the scanning parser)
Cc: stable@vger.kernel.org
Fixes: 5c2f7727d4 ("mtd: mtdpart: check for subpartitions parsing result")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The memory allocated for struct pcmciamtd_dev in pcmciamtd_probe() is
not freed in the corresponding remove function pcmciamtd_detach().
Fix that by freeing it in the remove function.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
NDI devices have been using a latency timer of 1 ms since commit
b760dac290 ("USB: ftdi: support NDI devices"), which also added a
vendor specific module parameter that could be used to override the
default value for these devices.
Module parameters should generally be avoided as they apply to all
devices managed by a driver and vendor specific hacks should be kept out
of mainline.
Drop the module parameter in favour of the generic sysfs interface for
setting the latency timer (e.g. using udev rules) while keeping the
default 1 ms timer for NDI devices.
Note that there seems to be no (correct) public references to the module
parameter and most likely no one is using it.
Cc: Ryan Mann <rmann@ndigital.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
NDI devices remap the 19200 line speed to 1.2 Mbps.
Use the quirk pointer from the match table to enable the quirk instead
of comparing PIDs on every speed change.
Signed-off-by: Johan Hovold <johan@kernel.org>
Clean up the quirk function comments that were using odd formatting and
were referring to a non-existing function.
Signed-off-by: Johan Hovold <johan@kernel.org>
Rewrite the 8u2232c quirk to avoid the manufacturer and product string
comparisons for the second port which will always be bound.
Signed-off-by: Johan Hovold <johan@kernel.org>
Probe of a device should generally be silent unless errors are
encountered.
Stop logging that the JTAG port is ignored when probing devices with
such a reserved port.
This also maintains consistency with devices that match on interface
number to avoid binding to reserved ports.
Note that the message is not even correct for the second port of the ST
Micro Connect Lite.
Signed-off-by: Johan Hovold <johan@kernel.org>
Some FTDI devices have the first port reserved for JTAG and have been
using a dedicated quirk to prevent binding to it.
As can be inferred directly or indirectly from the commit messages,
almost all of these devices are dual port devices which means that the
more recently added macro for matching on interface number can be used
instead (and some such devices do so already).
This avoids probing interfaces that will never be bound and cleans up
the match table somewhat.
Note that the JTAG quirk is kept for quad port devices, which would
otherwise require three match entries.
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Heiko Carstens says:
====================
Remove s390 compat support to allow for code simplification and especially
reduced test effort. To the best of our knowledge there aren't any 31 bit
binaries out in the world anymore that would matter for newer kernels or
newer distributions.
Distributions do not provide compat packages since quite some time or even
have CONFIG_COMPAT disabled.
Instead of adding deprecation warnings to config option, or adding kernel
messages, just remove the code. Deprecation warnings haven't proven to be
useful. If it turns out there is still a reason to keep the compat support
this series can be reverted at any time in the future.
====================
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The s390 syscall.tbl format differs slightly from most others, and
therefore requires an s390 specific system call table generation
script.
With compat support gone use the opportunity to switch to generic
system call table generation. The abi for all 64 bit system calls is
now common, since there is no need to specify if system call entry
points are only for 64 bit anymore.
Furthermore create the system call table in C instead of assembler
code in order to get type checking for all system call functions
contained within the table.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
With compat support gone there is only one system call table
left. Therefore remove the sys_call_table pointer from
thread_struct and use the sys_call_table directly.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Since the kernel does not support running 31 bit / compat binaries
anymore, remove also the corresponding 31 bit support from uapi header
files.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
There shouldn't be any 31 bit code around anymore that matters.
Remove the compat layer support required to run 31 bit code.
Reason for removal is code simplification and reduced test effort.
Note that this comes without any deprecation warnings added to config
options, or kernel messages, since most likely those would be ignored
anyway.
If it turns out there is still a reason to keep the compat layer this
can be reverted at any time in the future.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Remove s390 compat support from everything within tools, since s390 compat
support will be removed from the kernel.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Weißschuh <linux@weissschuh.net> # tools/nolibc selftests/nolibc
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> # selftests/vDSO
Acked-by: Alexei Starovoitov <ast@kernel.org> # bpf bits
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
All system call wrappers should match the sys_call_ptr_t type. This is not
the case for system calls without parameters. Add the missing pt_regs
parameter there too.
Note: this is currently not a problem, since the parameter is unused.
However it prevents to create a correctly typed system call table in
C. With the current assembler implementation this works because of
missing type checking.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
kvm_s390_handle_lpsw() make use of the psw_compat_t type even though
the code has nothing to do with CONFIG_COMPAT, for which the type is
supposed to be used. Use psw32_t instead.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Use a standard "_t" suffix for psw_t32 and rename it to psw32_t.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
On Tegra410, Compute and System GPIOs have same port names. This
results in the same GPIO names for both Compute and System GPIOs
during initialization in `tegra186_gpio_probe()`, which results in
following warnings:
kernel: gpio gpiochip1: Detected name collision for GPIO name 'PA.00'
kernel: gpio gpiochip1: Detected name collision for GPIO name 'PA.01'
kernel: gpio gpiochip1: Detected name collision for GPIO name 'PA.02'
kernel: gpio gpiochip1: Detected name collision for GPIO name 'PB.00'
kernel: gpio gpiochip1: Detected name collision for GPIO name 'PB.01'
...
Add GPIO name prefix in the SoC data and use it to initialize the GPIO
name.
Port names remain unchanged for previous SoCs. On Tegra410, Compute
GPIOs are named COMPUTE-P<PORT>.GPIO, and System GPIOs are named
SYSTEM-P<PORT>.GPIO.
Fixes: 9631a10083 ("gpio: tegra186: Add support for Tegra410")
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20251113163112.885900-1-kkartik@nvidia.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Allow to kill devm_gpio_request_one() independently by converting it
to use legacy APIs that will be alive a bit longer.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20251112093608.1481030-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Make sure we kill gpio_request_one() first by converting it to
use legacy APIs that will be alive a bit longer. In particular,
this also shows the code we will use in another function to make
it die independently.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20251112093608.1481030-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add better support for GPIOs shared by multiple consumers.
-----BEGIN PGP SIGNATURE-----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=fa8j
-----END PGP SIGNATURE-----
Merge tag 'gpio/shared-gpios-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux.git into gpio/for-next
Immutable branch between the GPIO, ASoC and regulator trees for v6.19-rc1
Add better support for GPIOs shared by multiple consumers.
Initialize result to 0 so the error path doesn't read it
uninitialized when the invoke fails. Fixes a Smatch warning.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/op-tee/7c1e0de2-7d42-4c6b-92fe-0e4fe5d650b5@oss.qualcomm.com/
Fixes: d6e290837e ("tee: add Qualcomm TEE driver")
Signed-off-by: Amirreza Zarrabi <amirreza.zarrabi@oss.qualcomm.com>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Provide an interface allowing consumers to check if a GPIO descriptor
represents a GPIO that can potentially be shared by multiple consumers
at the same time. This is exposed to allow subsystems that already
work around the limitations of the current non-exclusive GPIO handling
in some ways, to gradually convert to relying on the new shared GPIO
feature of GPIOLIB.
Extend the gpiolib-shared module to mark the GPIO shared proxy
descriptors with a flag checked by the new interface.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251112-gpio-shared-v4-6-b51f97b1abd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Some qualcomm platforms use shared GPIOs. Enable support for them by
selecting the Kconfig switch provided by GPIOLIB.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bjorn Andersson <andersson@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20251112-gpio-shared-v4-7-b51f97b1abd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
As the final step in adding official support for shared GPIOs, enable
the previously added elements in core GPIO subsystem code. Set-up shared
GPIOs when adding a GPIO chip, tear it down on removal and check if a
GPIO descriptor looked up during the firmware-node stage is shared and
fall-back to machine lookup in this case.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251112-gpio-shared-v4-5-b51f97b1abd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add a virtual GPIO proxy driver which arbitrates access to a single
shared GPIO by multiple users. It works together with the core shared
GPIO support from GPIOLIB and functions by acquiring a reference to a
shared GPIO descriptor exposed by gpiolib-shared and making sure that
the state of the GPIO stays consistent.
In general: if there's only one user at the moment: allow it to do
anything as if this was a normal GPIO (in essence: just propagate calls
to the underlying real hardware driver). If there are more users: don't
allow to change the direction set by the initial user, allow to change
configuration options but warn about possible conflicts and finally:
treat the output-high value as a reference counted, logical "GPIO
enabled" setting, meaning: the GPIO value is set to high when the first
user requests it to be high and back to low once the last user stops
"voting" for high.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251112-gpio-shared-v4-4-b51f97b1abd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This module scans the device tree (for now only OF nodes are supported
but care is taken to make other fwnode implementations easy to
integrate) and determines which GPIO lines are shared by multiple users.
It stores that information in memory. When the GPIO chip exposing shared
lines is registered, the shared GPIO descriptors it exposes are marked
as shared and virtual "proxy" devices that mediate access to the shared
lines are created. When a consumer of a shared GPIO looks it up, its
fwnode lookup is redirected to a just-in-time machine lookup that points
to this proxy device.
This code can be compiled out on platforms which don't use shared GPIOs.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251112-gpio-shared-v4-3-b51f97b1abd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
