Convert ext4_inode_cache to use the kmem_cache_args interface and
specify a free pointer offset.
Since ext4_inode_cache uses a constructor, the free pointer would be
placed after the object to prevent overwriting fields used by the
constructor.
However, some fields such as ->i_flags are not used by the constructor
and can safely be repurposed for the free pointer.
Specify the free pointer offset at i_flags to reduce the object size.
Signed-off-by: Harry Yoo <harry.yoo@oracle.com>
Link: https://patch.msgid.link/20260113061845.159790-4-harry.yoo@oracle.com
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
When a slab cache has a constructor, the free pointer is placed after the
object because certain fields must not be overwritten even after the
object is freed.
However, some fields that the constructor does not initialize can safely
be overwritten after free. Allow specifying the free pointer offset within
the object, reducing the overall object size when some fields can be reused
for the free pointer.
Adjust the document accordingly.
Signed-off-by: Harry Yoo <harry.yoo@oracle.com>
Link: https://patch.msgid.link/20260113061845.159790-3-harry.yoo@oracle.com
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
When both KASAN and SLAB_STORE_USER are enabled, accesses to
struct kasan_alloc_meta fields can be misaligned on 64-bit architectures.
This occurs because orig_size is currently defined as unsigned int,
which only guarantees 4-byte alignment. When struct kasan_alloc_meta is
placed after orig_size, it may end up at a 4-byte boundary rather than
the required 8-byte boundary on 64-bit systems.
Note that 64-bit architectures without HAVE_EFFICIENT_UNALIGNED_ACCESS
are assumed to require 64-bit accesses to be 64-bit aligned.
See HAVE_64BIT_ALIGNED_ACCESS and commit adab66b71a ("Revert:
"ring-buffer: Remove HAVE_64BIT_ALIGNED_ACCESS"") for more details.
Change orig_size from unsigned int to unsigned long to ensure proper
alignment for any subsequent metadata. This should not waste additional
memory because kmalloc objects are already aligned to at least
ARCH_KMALLOC_MINALIGN.
Closes: https://lore.kernel.org/all/aPrLF0OUK651M4dk@hyeyoo
Suggested-by: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: stable@vger.kernel.org
Fixes: 6edf2576a6 ("mm/slub: enable debugging memory wasting of kmalloc")
Signed-off-by: Harry Yoo <harry.yoo@oracle.com>
Closes: https://lore.kernel.org/all/aPrLF0OUK651M4dk@hyeyoo/
Link: https://patch.msgid.link/20260113061845.159790-2-harry.yoo@oracle.com
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
The comments above check_pad_bytes() document the field layout of a
single object. Rewrite them to improve clarity and precision.
Also update an outdated comment in calculate_sizes().
Suggested-by: Harry Yoo <harry.yoo@oracle.com>
Acked-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Hao Li <hao.li@linux.dev>
Link: https://patch.msgid.link/20251229122415.192377-1-hao.li@linux.dev
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
When allocating slabobj_ext array in alloc_slab_obj_exts(), the array
can be allocated from the same slab we're allocating the array for.
This led to obj_exts_in_slab() incorrectly returning true [1],
although the array is not allocated from wasted space of the slab.
Vlastimil Babka observed that this problem should be fixed even when
ignoring its incompatibility with obj_exts_in_slab(), because it creates
slabs that are never freed as there is always at least one allocated
object.
To avoid this, use the next kmalloc size or large kmalloc when
the array can be allocated from the same cache we're allocating
the array for.
In case of random kmalloc caches, there are multiple kmalloc caches
for the same size and the cache is selected based on the caller address.
Because it is fragile to ensure the same caller address is passed to
kmalloc_slab(), kmalloc_noprof(), and kmalloc_node_noprof(), bump the
size to (s->object_size + 1) when the sizes are equal, instead of
directly comparing the kmem_cache pointers.
Note that this doesn't happen when memory allocation profiling is
disabled, as when the allocation of the array is triggered by memory
cgroup (KMALLOC_CGROUP), the array is allocated from KMALLOC_NORMAL.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202601231457.f7b31e09-lkp@intel.com [1]
Cc: stable@vger.kernel.org
Fixes: 4b87369646 ("mm/slab: add allocation accounting into slab allocation and free paths")
Signed-off-by: Harry Yoo <harry.yoo@oracle.com>
Link: https://patch.msgid.link/20260126125714.88008-1-harry.yoo@oracle.com
Reviewed-by: Hao Li <hao.li@linux.dev>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
The revocable code is still under active discussion, and there is no
in-kernel users of it. So disable it from the build for now so that no
one suffers from it being present in the tree, yet leave it in the
source tree so that others can easily test it by reverting this commit
and building off of it for future releases.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/2026020307-rimmed-dreamy-5a67@gregkh
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The mgag200_bmc_stop_scanout() function is called by the .atomic_disable()
handler for the MGA G200 VGA BMC encoder. This function performs a few
register writes to inform the BMC of an upcoming mode change, and then
polls to wait until the BMC actually stops.
The polling is implemented using a busy loop with udelay() and an iteration
timeout of 300, resulting in the function blocking for 300 milliseconds.
The function gets called ultimately by the output_poll_execute work thread
for the DRM output change polling thread of the mgag200 driver:
kworker/0:0-mm_ 3528 [000] 4555.315364:
ffffffffaa0e25b3 delay_halt.part.0+0x33
ffffffffc03f6188 mgag200_bmc_stop_scanout+0x178
ffffffffc087ae7a disable_outputs+0x12a
ffffffffc087c12a drm_atomic_helper_commit_tail+0x1a
ffffffffc03fa7b6 mgag200_mode_config_helper_atomic_commit_tail+0x26
ffffffffc087c9c1 commit_tail+0x91
ffffffffc087d51b drm_atomic_helper_commit+0x11b
ffffffffc0509694 drm_atomic_commit+0xa4
ffffffffc05105e8 drm_client_modeset_commit_atomic+0x1e8
ffffffffc0510ce6 drm_client_modeset_commit_locked+0x56
ffffffffc0510e24 drm_client_modeset_commit+0x24
ffffffffc088a743 __drm_fb_helper_restore_fbdev_mode_unlocked+0x93
ffffffffc088a683 drm_fb_helper_hotplug_event+0xe3
ffffffffc050f8aa drm_client_dev_hotplug+0x9a
ffffffffc088555a output_poll_execute+0x29a
ffffffffa9b35924 process_one_work+0x194
ffffffffa9b364ee worker_thread+0x2fe
ffffffffa9b3ecad kthread+0xdd
ffffffffa9a08549 ret_from_fork+0x29
On a server running ptp4l with the mgag200 driver loaded, we found that
ptp4l would sometimes get blocked from execution because of this busy
waiting loop.
Every so often, approximately once every 20 minutes -- though with large
variance -- the output_poll_execute() thread would detect some sort of
change that required performing a hotplug event which results in attempting
to stop the BMC scanout, resulting in a 300msec delay on one CPU.
On this system, ptp4l was pinned to a single CPU. When the
output_poll_execute() thread ran on that CPU, it blocked ptp4l from
executing for its 300 millisecond duration.
This resulted in PTP service disruptions such as failure to send a SYNC
message on time, failure to handle ANNOUNCE messages on time, and clock
check warnings from the application. All of this despite the application
being configured with FIFO_RT and a higher priority than the background
workqueue tasks. (However, note that the kernel did not use
CONFIG_PREEMPT...)
It is unclear if the event is due to a faulty VGA connection, another bug,
or actual events causing a change in the connection. At least on the system
under test it is not a one-time event and consistently causes disruption to
the time sensitive applications.
The function has some helpful comments explaining what steps it is
attempting to take. In particular, step 3a and 3b are explained as such:
3a - The third step is to verify if there is an active scan. We are
waiting on a 0 on remhsyncsts (<XSPAREREG<0>.
3b - This step occurs only if the remove is actually scanning. We are
waiting for the end of the frame which is a 1 on remvsyncsts
(<XSPAREREG<1>).
The actual steps 3a and 3b are implemented as while loops with a
non-sleeping udelay(). The first step iterates while the tmp value at
position 0 is *not* set. That is, it keeps iterating as long as the bit is
zero. If the bit is already 0 (because there is no active scan), it will
iterate the entire 300 attempts which wastes 300 milliseconds in total.
This is opposite of what the description claims.
The step 3b logic only executes if we do not iterate over the entire 300
attempts in the first loop. If it does trigger, it is trying to check and
wait for a 1 on the remvsyncsts. However, again the condition is actually
inverted and it will loop as long as the bit is 1, stopping once it hits
zero (rather than the explained attempt to wait until we see a 1).
Worse, both loops are implemented using non-sleeping waits which spin
instead of allowing the scheduler to run other processes. If the kernel is
not configured to allow arbitrary preemption, it will waste valuable CPU
time doing nothing.
There does not appear to be any documentation for the BMC register
interface, beyond what is in the comments here. It seems more probable that
the comment here is correct and the implementation accidentally got
inverted from the intended logic.
Reading through other DRM driver implementations, it does not appear that
the .atomic_enable or .atomic_disable handlers need to delay instead of
sleep. For example, the ast_astdp_encoder_helper_atomic_disable() function
calls ast_dp_set_phy_sleep() which uses msleep(). The "atomic" in the name
is referring to the atomic modesetting support, which is the support to
enable atomic configuration from userspace, and not to the "atomic context"
of the kernel. There is no reason to use udelay() here if a sleep would be
sufficient.
Replace the while loops with a read_poll_timeout() based implementation
that will sleep between iterations, and which stops polling once the
condition is met (instead of looping as long as the condition is met). This
aligns with the commented behavior and avoids blocking on the CPU while
doing nothing.
Note the RREG_DAC is implemented using a statement expression to allow
working properly with the read_poll_timeout family of functions. The other
RREG_<TYPE> macros ought to be cleaned up to have better semantics, and
several places in the mgag200 driver could make use of RREG_DAC or similar
RREG_* macros should likely be cleaned up for better semantics as well, but
that task has been left as a future cleanup for a non-bugfix.
Fixes: 414c453106 ("mgag200: initial g200se driver (v2)")
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260202-jk-mgag200-fix-bad-udelay-v2-1-ce1e9665987d@intel.com
Freescale Management Complex:
- Convert fsl-mc bus to bus callbacks
- Fix a use-after-free
- Drop redundant error messages
- Fix ressources release on some error path
Freescale QUICC Engine:
- Add an interrupt controller for IO Ports
- Use scoped for-each OF child loop
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTH/wu6mIr0ZW+Vui/dkHAmvKvPUwUCaX2wKAAKCRDdkHAmvKvP
U8ZEAQCjVUaUt+nRVvd+/WzZy+dh4vT9r1FJeV4MtHSTfvSM+QD+P5eiz0RIvCAZ
0++CD7UTnPvpxlUMXX08cJRPLmgr1wA=
=GjGO
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=+uwq
-----END PGP SIGNATURE-----
Merge tag 'soc_fsl-6.20-1' of https://git.kernel.org/pub/scm/linux/kernel/git/chleroy/linux into soc/drivers
FSL SOC Changes for 6.20
Freescale Management Complex:
- Convert fsl-mc bus to bus callbacks
- Fix a use-after-free
- Drop redundant error messages
- Fix ressources release on some error path
Freescale QUICC Engine:
- Add an interrupt controller for IO Ports
- Use scoped for-each OF child loop
* tag 'soc_fsl-6.20-1' of https://git.kernel.org/pub/scm/linux/kernel/git/chleroy/linux:
bus: fsl-mc: fix an error handling in fsl_mc_device_add()
soc: fsl: qe: qe_ports_ic: Consolidate chained IRQ handler install/remove
dt-bindings: soc: fsl: qe: Add an interrupt controller for QUICC Engine Ports
soc: fsl: qe: Add an interrupt controller for QUICC Engine Ports
soc: fsl: qe: Simplify with scoped for each OF child loop
bus: fsl-mc: fix use-after-free in driver_override_show()
bus: fsl-mc: Convert to bus callbacks
bus: fsl-mc: Drop error message in probe function
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- dt-bindings updates:
- Add intel,socfpga-agilex5-socdk-modular for the Agilex5 mod board
- Add intel,socfpga-agilex-emmc for the Agilex eMMC daughter board
- Move entries in intel,socfpga.yaml into altera.yaml
- Add syscon as a fallback for sys-mgr
- Add dma-cohrerent property for Agilex5 NAND and DMA
- Add support for the Agilex5 modular board
- Add IOMMUS property for ethernet nodes for Agilex5
- Use lowercase hex for dts files
- Add #address-cells and #size-cells for sram
- Fix dtbs_check warning for fpga-region
- Move dma controller node for Agilex5 under simple-bus
- Add support for the Agilex eMMC daughter board
-----BEGIN PGP SIGNATURE-----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=ux17
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=XO7t
-----END PGP SIGNATURE-----
Merge tag 'socfpga_dts_updates_for_v6.20_v3' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into soc/dt
SoCFPGA DTS updates for v6.20, version 3
- dt-bindings updates:
- Add intel,socfpga-agilex5-socdk-modular for the Agilex5 mod board
- Add intel,socfpga-agilex-emmc for the Agilex eMMC daughter board
- Move entries in intel,socfpga.yaml into altera.yaml
- Add syscon as a fallback for sys-mgr
- Add dma-cohrerent property for Agilex5 NAND and DMA
- Add support for the Agilex5 modular board
- Add IOMMUS property for ethernet nodes for Agilex5
- Use lowercase hex for dts files
- Add #address-cells and #size-cells for sram
- Fix dtbs_check warning for fpga-region
- Move dma controller node for Agilex5 under simple-bus
- Add support for the Agilex eMMC daughter board
* tag 'socfpga_dts_updates_for_v6.20_v3' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
dt-bindings: intel: Add Agilex eMMC support
arm64: dts: socfpga: agilex: add emmc support
arm64: dts: intel: agilex5: Add simple-bus node on top of dma controller node
ARM: dts: socfpga: fix dtbs_check warning for fpga-region
ARM: dts: socfpga: add #address-cells and #size-cells for sram node
dt-bindings: altera: document syscon as fallback for sys-mgr
arm64: dts: altera: Use lowercase hex
dt-bindings: arm: altera: combine Intel's SoCFPGA into altera.yaml
arm64: dts: socfpga: agilex5: Add IOMMUS property for ethernet nodes
arm64: dts: socfpga: agilex5: add support for modular board
dt-bindings: intel: Add Agilex5 SoCFPGA modular board
arm64: dts: socfpga: agilex5: Add dma-coherent property
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Jan Höppner says:
====================
Quite a lot of the tape device driver code is outdated as devices and
storage systems supported by that code aren't supported by IBM anymore for
a long time. Especially physical tape devices are not supported or used
directly anymore.
The only tape storage system supported by IBM is the Virtual Tape Server
(VTS) family with TS7700 systems [1]. Host systems will only talk to VTS
and are presented with the virtualized 3490E tape device type only. VTS can
and still uses tape libraries with physical 3592 cartridges as storage
backends (e.g. TS4500). However, these are never seen by any host.
The general goal/idea for the tape device driver is to only support VTS
from now on. This series gets rid of old outdated code that is not
relevant to VTS. There is probably quite a bit more that could be
cleaned up or could be improved. However, this is a first run to cleanup
the code base and somewhat reduce maintenance burden.
[1] https://www.ibm.com/products/ts7700
[2] https://www.ibm.com/products/ts4500
====================
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The driver now exclusively supports 3490 tape devices, given support for
3480 tape devices has been removed. Update the device driver name, its
source file name, and change any occurrences of "34xx/34XX" to "3490" in
the source code and comments.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Quite a few Error Recovery Action (ERA) codes and sense data entries are
not relevant anymore for the Virtual Tape Server (VTS) and are not being
used by VTS. Most of them were relevant for actual physical errors when
a tape cartridge got stuck or a tape didn't rewind properly for example.
Remove these codes from the sense data analysis as it's dead code
anyway.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The only supported device type by the Virtual Tape Server is 3490. The
3480 device type was an old physical tape model and doesn't exist
anymore. Remove 3480 from the list and any mention of it.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Quite a few command definitions are either not used or don't exist for
3490 tape devices on Virtual Tape Servers (VTS). Cleanup the list, which
makes it easier to understand what commands are actually implemented by
the driver. The lists below outline the exact reason for the removal.
Description for existing commands are adapted to reflect the removal of
support for old device types.
The following commands don't exist in VTS for 3490 devices and are
unused:
INVALID_00 0x00
DIAG_MODE_SET 0x0B
FORCE_STREAM_CNT 0xEB
LOOP_WRITE_TO_READ 0x8B
MODE_SET_C3 0xC3
MODE_SET_CB 0xCB
MODE_SET_D3 0xD3
NEW_MODE_SET 0xEB
RELEASE 0xD4
REQ_TRK_IN_ERROR 0x1B
RESERVE 0xF4
SET_DIAGNOSE 0x4B
The following command definitions are not used:
CONTROL_ACCESS 0xE3
PERF_SUBSYS_FUNC 0x77
READ_BACKWARD 0x0C
READ_BUFFER 0x12
READ_BUFF_LOG 0x24
READ_CONFIG_DATA 0xFA
READ_DEV_CHAR 0x64
READ_MESSAGE_ID 0x4E
READ_SUBSYS_DATA 0x3E
SENSE_GROUP_ID 0x34
SENSE_ID 0xE4
SET_GROUP_ID 0xAF
SET_INTERFACE_ID 0x73
SET_TAPE_WRITE_IMMED 0xC3
SUSPEND 0x5B
SYNC 0x43
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
For real 3490 tape models a logical block was composed of a direction
bit (wrap), a segment number, a format mode, and a logical block number.
This is represented in a 4byte identifier.
The Virtual Tape Server (VTS) emulates 3490 tape devices and uses a
stripped block id format where bit 0-9 of the 4byte identifier are
always 0. Bit 10-31 represent the logical block number.
All tapes use the 3480-2 XF format, which was defined via
TAPE34XX_FMT_3480_2_XF but never used. There is also no special handling
required anymore as this is the only format being used.
Since VTS doesn't require any special handling of block ids and format,
corresponding code is removed.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The LOAD_DISPLAY (LDD) X'9F' is still accepted by the Virtual Tape
Server (VTS) but does not perform any action.
Remove all functions and definitions related to this command.
The tape_34xx_ioctl() function is also removed as it was mainly used to
handle additional ioctl functionality. LOAD_DISPLAY was the only left
case. All other ioctls are handled in tapechar_ioctl().
With LOAD_DISPLAY, the remaining definitions in asm/tape390.h are gone.
Delete the file.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Physical 3590/3592 tape models are not supported anymore for a very long
time. The Virtual Tape Server (VTS) emulates and presents only 3490E
models to the host. This is the only supported model and storage server.
Remove the entire code base for 3590/3592 models as it can be considered
dead code for quite some time already.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The comment in hyperv_cleanup() became out-of-date as a result of
commit c8ed081264 ("x86/hyperv: Use direct call to hypercall-page").
Update the comment. No code or functional change.
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
While unhooking from the irqfd waitqueue, clear the internal eventfd
counter by using eventfd_ctx_remove_wait_queue() instead of
remove_wait_queue(), preventing potential spurious interrupts. This
removes the need to store a pointer into the workqueue, as the eventfd
already keeps track of it.
This mimicks what other similar subsystems do on their equivalent paths
with their irqfds (KVM, Xen, ACRN support, etc).
Signed-off-by: Carlos López <clopez@suse.de>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
When running with a paravisor and SEV-SNP, the GHCB page is provided
by the paravisor instead of being allocated by Linux. The provided page
is normal memory, but is outside of the physical address space seen by
Linux. As such it cannot be accessed via the kernel's direct map, and
must be explicitly mapped to a kernel virtual address.
Current code uses ioremap_cache() and iounmap() to map and unmap the page.
These functions are for use on I/O address space that may not behave as
normal memory, so they generate or expect addresses with the __iomem
attribute. For normal memory, the preferred functions are memremap() and
memunmap(), which operate similarly but without __iomem.
At the time of the original work on CoCo VMs on Hyper-V, memremap() did not
support creating a decrypted mapping, so ioremap_cache() was used instead,
since I/O address space is always mapped decrypted. memremap() has since
been enhanced to allow decrypted mappings, so replace ioremap_cache() with
memremap() when mapping the GHCB page. Similarly, replace iounmap() with
memunmap(). As a side benefit, the replacement cleans up 'sparse' warnings
about __iomem mismatches.
The replacement is done to use the correct functions as long-term goodness
and to clean up the sparse warnings. No runtime bugs are fixed.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311111925.iPGGJik4-lkp@intel.com/
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
When running with a paravisor or in the root partition, the SynIC event and
message pages are provided by the paravisor or hypervisor respectively,
instead of being allocated by Linux. The provided pages are normal memory,
but are outside of the physical address space seen by Linux. As such they
cannot be accessed via the kernel's direct map, and must be explicitly
mapped to a kernel virtual address.
Current code uses ioremap_cache() and iounmap() to map and unmap the pages.
These functions are for use on I/O address space that may not behave as
normal memory, so they generate or expect addresses with the __iomem
attribute. For normal memory, the preferred functions are memremap() and
memunmap(), which operate similarly but without __iomem.
At the time of the original work on CoCo VMs on Hyper-V, memremap() did not
support creating a decrypted mapping, so ioremap_cache() was used instead,
since I/O address space is always mapped decrypted. memremap() has since
been enhanced to allow decrypted mappings, so replace ioremap_cache() with
memremap() when mapping the event and message pages. Similarly, replace
iounmap() with memunmap(). As a side benefit, the replacement cleans up
'sparse' warnings about __iomem mismatches.
The replacement is done to use the correct functions as long-term goodness
and to clean up the sparse warnings. No runtime bugs are fixed.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202601170445.JtZQwndW-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202512150359.fMdmbddk-lkp@intel.com/
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
hv_root_crash_init() is not setting up the hypervisor crash collection
for baremetal cases because when it's called, hypervisor page is not
setup.
Fix is simple, just move the crash init call after the hypercall
page setup.
Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
The pci-hyperv-intf driver has unnecessary empty module_init and
module_exit functions. Remove them. Note that if a module_init function
exists, a module_exit function must also exist; otherwise, the module
cannot be unloaded.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Introduce a debugfs interface to expose root and child partition stats
when running with mshv_root.
Create a debugfs directory "mshv" containing 'stats' files organized by
type and id. A stats file contains a number of counters depending on
its type. e.g. an excerpt from a VP stats file:
TotalRunTime : 1997602722
HypervisorRunTime : 649671371
RemoteNodeRunTime : 0
NormalizedRunTime : 1997602721
IdealCpu : 0
HypercallsCount : 1708169
HypercallsTime : 111914774
PageInvalidationsCount : 0
PageInvalidationsTime : 0
On a root partition with some active child partitions, the entire
directory structure may look like:
mshv/
stats # hypervisor stats
lp/ # logical processors
0/ # LP id
stats # LP 0 stats
1/
2/
3/
partition/ # partition stats
1/ # root partition id
stats # root partition stats
vp/ # root virtual processors
0/ # root VP id
stats # root VP 0 stats
1/
2/
3/
42/ # child partition id
stats # child partition stats
vp/ # child VPs
0/ # child VP id
stats # child VP 0 stats
1/
43/
55/
On L1VH, some stats are not present as it does not own the hardware
like the root partition does:
- The hypervisor and lp stats are not present
- L1VH's partition directory is named "self" because it can't get its
own id
- Some of L1VH's partition and VP stats fields are not populated, because
it can't map its own HV_STATS_AREA_PARENT page.
Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com>
Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com>
Co-developed-by: Purna Pavan Chandra Aekkaladevi <paekkaladevi@linux.microsoft.com>
Signed-off-by: Purna Pavan Chandra Aekkaladevi <paekkaladevi@linux.microsoft.com>
Co-developed-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Acked-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Introduce mshv_debugfs_counters.c, containing static data
corresponding to HV_*_COUNTER enums in the hypervisor source.
Defining the enum members as an array instead makes more sense,
since it will be iterated over to print counter information to
debugfs.
Include hypervisor, logical processor, partition, and virtual
processor counters.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Acked-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
hv_stats_page belongs in hvhdk.h, move it there.
It does not require a union to access the data for different counters,
just use a single u64 array for simplicity and to match the Windows
definitions.
While at it, correct the ARM64 value for VpRootDispatchThreadBlocked.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Acked-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Currently vp->vp_stats_pages is only used by the root scheduler for fast
interrupt injection.
Soon, vp_stats_pages will also be needed for exposing child VP stats to
userspace via debugfs. Mapping the pages a second time to a different
address causes an error on L1VH.
Remove the scheduler requirement and always map the vp stats pages.
Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Acked-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
These functions are currently only used to map child partition VP stats,
on root partition. However, they will soon be used on L1VH, and also
used for mapping the host's own VP stats.
Introduce a helper is_l1vh_parent() to determine whether we are mapping
our own VP stats. In this case, do not attempt to map the PARENT area.
Note this is a different case than mapping PARENT on an older hypervisor
where it is not available at all, so must be handled separately.
On unmap, pass the stats pages since on L1VH the kernel allocates them
and they must be freed in hv_unmap_stats_page().
Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Acked-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Refactor all relevant functions to use struct hv_stats_page pointers
instead of void pointers for stats page mapping and unmapping thus
improving type safety and code clarity across the Hyper-V stats mapping
APIs.
Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Acked-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Older versions of the hypervisor do not have a concept of separate SELF
and PARENT stats areas. In this case, mapping the HV_STATS_AREA_SELF page
is sufficient - it's the only page and it contains all available stats.
Mapping HV_STATS_AREA_PARENT returns HV_STATUS_INVALID_PARAMETER which
currently causes module init to fail on older hypevisor versions.
Detect this case and gracefully fall back to populating
stats_pages[HV_STATS_AREA_PARENT] with the already-mapped SELF page.
Add comments to clarify the behavior, including a clarification of why
this isn't needed for hv_call_map_stats_page2() which always supports
PARENT and SELF areas.
Signed-off-by: Purna Pavan Chandra Aekkaladevi <paekkaladevi@linux.microsoft.com>
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Acked-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
mshv code currently uses the POLLIN and POLLHUP flags. Starting with
commit a9a08845e9 ("vfs: do bulk POLL* -> EPOLL* replacement") the
intent is to use the EPOLL* versions throughout the kernel.
The comment at the top of mshv_eventfd.c describes it as being inspired
by the KVM implementation, which was changed by the above mentioned
commit in 2018 to use EPOLL*. mshv_eventfd.c is much newer than 2018
and there's no statement as to why it must use the POLL* versions.
So change it to use the EPOLL* versions. This change also resolves
a 'sparse' warning.
No functional change, and the generated code is the same.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202601220948.MUTO60W4-lkp@intel.com/
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
In mshv_vtl_sint_ioctl_pause_msg_stream(), the reference to function
mshv_vtl_synic_mask_vmbus_sint() is cast to type smp_call_func_t. The
cast generates a compiler warning because the function signature of
mshv_vtl_synic_mask_vmbus_sint() doesn't match smp_call_func_t.
There's no actual bug here because the mis-matched function signatures
are compatible at runtime. Nonetheless, eliminate the compiler warning
by changing the function signature of mshv_vtl_synic_mask_vmbus_sint()
to match what on_each_cpu() expects. Remove the cast because it is then
no longer necessary.
No functional change.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202601170352.qbh3EKH5-lkp@intel.com/
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Naman Jain <namjain@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Field pci_bus in struct hv_pcibus_device is unused since
commit 418cb6c8e0 ("PCI: hv: Generify PCI probing"). Remove it.
No functional change.
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Easwar Hariharan <easwar.hariharan@linux.microsoft.com>
Reviewed-by: Prasanna Kumar T S M <ptsm@linux.microsoft.com>
Reviewed-by: Srivatsa S. Bhat (Microsoft) <srivatsa@csail.mit.edu>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Convert clock dividers from round_rate() to determine_rate().
Add support for global, tcsr, rpmh, display, gpu, camera, and video
clock controllers for Kaanapali.
Add support for camera clock controller for SM8750.
Fix the SDCC RCGs to use shared_floor_ops across a variety of platforms.
Add support for global clock controller on MSM8940 and SDM439.
-----BEGIN PGP SIGNATURE-----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=8hvs
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=U3q+
-----END PGP SIGNATURE-----
Merge tag 'qcom-clk-for-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into clk-qcom
Pull Qualcomm clk driver updates from Bjorn Andersson:
- Convert clock dividers from round_rate() to determine_rate()
- Add support for global, tcsr, rpmh, display, gpu, camera, and
video clock controllers for Kaanapali
- Add support for camera clock controller for SM8750
- Fix the SDCC RCGs to use shared_floor_ops across a variety of
platforms
- Add support for global clock controller on MSM8940 and SDM439
* tag 'qcom-clk-for-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (49 commits)
clk: qcom: sm8750: Constify 'qcom_cc_desc' in SM8750 camcc
clk: qcom: gfx3d: add parent to parent request map
clk: qcom: dispcc-sm7150: Fix dispcc_mdss_pclk1_clk_src
clk: qcom: dispcc-sdm845: Enable parents for pixel clocks
clk: qcom: regmap-divider: convert from divider_round_rate() to divider_determine_rate()
clk: qcom: regmap-divider: convert from divider_ro_round_rate() to divider_ro_determine_rate()
clk: qcom: alpha-pll: convert from divider_round_rate() to divider_determine_rate()
clk: qcom: Add support for GPUCC and GXCLK for Kaanapali
clk: qcom: Add support for VideoCC driver for Kaanapali
clk: qcom: camcc: Add support for camera clock controller for Kaanapali
clk: qcom: dispcc: Add support for display clock controller Kaanapali
clk: qcom: clk-alpha-pll: Add support for controlling Pongo EKO_T PLL
clk: qcom: clk-alpha-pll: Update the PLL support for cal_l
clk: qcom: camcc: Add camera clock controller driver for SM8750 SoC
clk: qcom: clk-alpha-pll: Add support for controlling Rivian PLL
dt-bindings: clock: qcom: document the Kaanapali GPU Clock Controller
dt-bindings: clock: qcom: Add Kaanapali video clock controller
dt-bindings: clock: qcom: Add support for CAMCC for Kaanapali
dt-bindings: clock: qcom: document Kaanapali DISPCC clock controller
dt-bindings: clock: qcom: Add camera clock controller for SM8750 SoC
...
ASPEED clock controller provides a couple of resets. Add the define of
video to allow referring to it.
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add AST2700 clock controller driver and also use axiliary
device framework register the reset controller driver.
Due to clock and reset using the same register region.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add support entry for ASPEED clock drivers.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Prepare for long-term maintenance and future additions by introducing a
dedicated drivers/clk/aspeed/ subdirectory for ASPEED clock drivers.
Move the existing ASPEED clock drivers into the new
drivers/clk/aspeed/ subdirectory.
No functional change, file move only.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This reverts commit 669917676e.
It's been shown to cause problems on i.MX and STM32 platforms
where the board doesn't boot. In one case, a clk with
CLK_IS_CRITICAL and CLK_OPS_PARENT_ENABLE is being registered
causing the parent to be enabled, the rate recalculated, and then
the parent is disabled causing the critical clk being registered
to stop clocking.
A fix for that would be to calculate the rate of the clk after
enabling the critical clk itself, but that wouldn't fix another
problem where a clk with CLK_OPS_PARENT_ENABLE is registered
before the parent is registered. In this case the hardware access
in the clk_ops::recalc_rate() function would fail if the parent
is disabled.
There are even more problems exposed by this patch because it
introduces logic that disables clks earlier in system boot than
has existed previously. Historically we've not disabled clks
until late init (clk_disable_unused) under the assumption that
clks have been registered enough to have a consistent view of the
clk tree. The clk_disable_unused logic doesn't work very well
though, leading to quite a few devices booting with
clk_ignore_unused on the kernel command line.
Long story short, disabling clks during clk registration is full
of pitfalls. Revert this commit until a proper solution can be
found.
Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Closes: https://lore.kernel.org/r/6239343.lOV4Wx5bFT@steina-w
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/r/036da7ce-6487-4a6e-9b15-97c6d3bcdcec@sirena.org.uk
Cc: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Cc: Brian Masney <bmasney@redhat.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Tested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Variable arrays should be defined as [], not [0], otherwise
the kernel complains:
memcpy : detected field-spanning write (size 9) of single field "param->set_program_ex.data" at drivers/platform/chrome/cros_ec_lightbar.c:603 (size 0)
Fixes: 9600b8bdbf ("platform/chrome: lightbar: Add support for large sequence")
Signed-off-by: Gwendal Grignou <gwendal@google.com>
Link: https://lore.kernel.org/r/20260204034848.697033-1-gwendal@google.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Kevin Hao says:
====================
net: cpsw: Execute ndo_set_rx_mode callback in a work queue
These two patches resolve an RTNL assertion call trace issue
in both the legacy and new cpsw drivers.
====================
Link: https://patch.msgid.link/20260203-bbb-v5-0-ea0ea217a85c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 1767bb2d47 ("ipv6: mcast: Don't hold RTNL for
IPV6_ADD_MEMBERSHIP and MCAST_JOIN_GROUP.") removed the RTNL lock for
IPV6_ADD_MEMBERSHIP and MCAST_JOIN_GROUP operations. However, this
change triggered the following call trace on my BeagleBone Black board:
WARNING: net/8021q/vlan_core.c:236 at vlan_for_each+0x120/0x124, CPU#0: rpcbind/481
RTNL: assertion failed at net/8021q/vlan_core.c (236)
Modules linked in:
CPU: 0 UID: 997 PID: 481 Comm: rpcbind Not tainted 6.19.0-rc7-next-20260130-yocto-standard+ #35 PREEMPT
Hardware name: Generic AM33XX (Flattened Device Tree)
Call trace:
unwind_backtrace from show_stack+0x28/0x2c
show_stack from dump_stack_lvl+0x30/0x38
dump_stack_lvl from __warn+0xb8/0x11c
__warn from warn_slowpath_fmt+0x130/0x194
warn_slowpath_fmt from vlan_for_each+0x120/0x124
vlan_for_each from cpsw_add_mc_addr+0x54/0x98
cpsw_add_mc_addr from __hw_addr_ref_sync_dev+0xc4/0xec
__hw_addr_ref_sync_dev from __dev_mc_add+0x78/0x88
__dev_mc_add from igmp6_group_added+0x84/0xec
igmp6_group_added from __ipv6_dev_mc_inc+0x1fc/0x2f0
__ipv6_dev_mc_inc from __ipv6_sock_mc_join+0x124/0x1b4
__ipv6_sock_mc_join from do_ipv6_setsockopt+0x84c/0x1168
do_ipv6_setsockopt from ipv6_setsockopt+0x88/0xc8
ipv6_setsockopt from do_sock_setsockopt+0xe8/0x19c
do_sock_setsockopt from __sys_setsockopt+0x84/0xac
__sys_setsockopt from ret_fast_syscall+0x0/0x54
This trace occurs because vlan_for_each() is called within
cpsw_ndo_set_rx_mode(), which expects the RTNL lock to be held.
Since modifying vlan_for_each() to operate without the RTNL lock is not
straightforward, and because ndo_set_rx_mode() is invoked both with and
without the RTNL lock across different code paths, simply adding
rtnl_lock() in cpsw_ndo_set_rx_mode() is not a viable solution.
To resolve this issue, we opt to execute the actual processing within
a work queue, following the approach used by the icssg-prueth driver.
Please note: To reproduce this issue, I manually reverted the changes to
am335x-bone-common.dtsi from commit c477358e66 ("ARM: dts: am335x-bone:
switch to new cpsw switch drv") in order to revert to the legacy cpsw
driver.
Fixes: 1767bb2d47 ("ipv6: mcast: Don't hold RTNL for IPV6_ADD_MEMBERSHIP and MCAST_JOIN_GROUP.")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260203-bbb-v5-2-ea0ea217a85c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 1767bb2d47 ("ipv6: mcast: Don't hold RTNL for
IPV6_ADD_MEMBERSHIP and MCAST_JOIN_GROUP.") removed the RTNL lock for
IPV6_ADD_MEMBERSHIP and MCAST_JOIN_GROUP operations. However, this
change triggered the following call trace on my BeagleBone Black board:
WARNING: net/8021q/vlan_core.c:236 at vlan_for_each+0x120/0x124, CPU#0: rpcbind/496
RTNL: assertion failed at net/8021q/vlan_core.c (236)
Modules linked in:
CPU: 0 UID: 997 PID: 496 Comm: rpcbind Not tainted 6.19.0-rc6-next-20260122-yocto-standard+ #8 PREEMPT
Hardware name: Generic AM33XX (Flattened Device Tree)
Call trace:
unwind_backtrace from show_stack+0x28/0x2c
show_stack from dump_stack_lvl+0x30/0x38
dump_stack_lvl from __warn+0xb8/0x11c
__warn from warn_slowpath_fmt+0x130/0x194
warn_slowpath_fmt from vlan_for_each+0x120/0x124
vlan_for_each from cpsw_add_mc_addr+0x54/0xd8
cpsw_add_mc_addr from __hw_addr_ref_sync_dev+0xc4/0xec
__hw_addr_ref_sync_dev from __dev_mc_add+0x78/0x88
__dev_mc_add from igmp6_group_added+0x84/0xec
igmp6_group_added from __ipv6_dev_mc_inc+0x1fc/0x2f0
__ipv6_dev_mc_inc from __ipv6_sock_mc_join+0x124/0x1b4
__ipv6_sock_mc_join from do_ipv6_setsockopt+0x84c/0x1168
do_ipv6_setsockopt from ipv6_setsockopt+0x88/0xc8
ipv6_setsockopt from do_sock_setsockopt+0xe8/0x19c
do_sock_setsockopt from __sys_setsockopt+0x84/0xac
__sys_setsockopt from ret_fast_syscall+0x0/0x5
This trace occurs because vlan_for_each() is called within
cpsw_ndo_set_rx_mode(), which expects the RTNL lock to be held.
Since modifying vlan_for_each() to operate without the RTNL lock is not
straightforward, and because ndo_set_rx_mode() is invoked both with and
without the RTNL lock across different code paths, simply adding
rtnl_lock() in cpsw_ndo_set_rx_mode() is not a viable solution.
To resolve this issue, we opt to execute the actual processing within
a work queue, following the approach used by the icssg-prueth driver.
Fixes: 1767bb2d47 ("ipv6: mcast: Don't hold RTNL for IPV6_ADD_MEMBERSHIP and MCAST_JOIN_GROUP.")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260203-bbb-v5-1-ea0ea217a85c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Several registers referenced in this driver's source code do not
actually exist (they are not writable and read as zero in my testing).
They exist in this driver because it originated as a copy of the dm9601
driver. Notably, these include the multicast filter registers - this
causes the driver to not support multicast packets correctly. Remove
the multicast filter code and register definitions. Instead, set the
chip to receive all multicast filter packets when any multicast
addresses are in the list.
Reviewed-by: Simon Horman <horms@kernel.org> (from v1)
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260203013924.28582-1-enelsonmoore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Many USB network drivers use identical code to pass ioctl
requests on to the MII layer. Reduce code duplication by
refactoring this code into a helper function.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> (v1)
Reviewed-by: Andrew Lunn <andrew@lunn.ch> (v3)
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260203013517.26170-1-enelsonmoore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Niklas Söderlund says:
====================
net: ethernet: renesas: rcar_gen4_ptp: Hide private data
The R-Car Gen4 PTP module started out as an exclusive feature of a
single driver, but have since been extended to cover both R-Car Switch
and TSN driver implementations on Gen4.
The feature have already been extended to be built as its own module
with an interface exposed thru a local header file. The header file
however also exposes the modules private data structure. The two
existing users have already started to poke at members of the struct.
The exposed private data being manipulated by users makes refactoring
and future rework hard as the interface for the module becomes to
chaotic. This small series aims to create two helpers to hide the
private data.
This is done as a small preparation before a third, new, users of the
Gen4 PTP will be added in a follow up series.
====================
Link: https://patch.msgid.link/20260201183745.1075399-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Gen4 PTP helper module is already used by RTSN and RSWITCH to
support PTP clocks and will be used by RAVB too. Hide the Gen4 PTP
private data structure to make sure none of the users poke at it.
This will be more important for RAVB use-cases as more then one RAVB
device will need to cooperate using one PTP clock source.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://patch.msgid.link/20260201183745.1075399-5-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of accessing the Gen4 PTP specific structure directly in drivers
add a helper to read the time. This is done in preparation to
completely hide the Gen4 PTP specific structure from users.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://patch.msgid.link/20260201183745.1075399-4-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
