pci_rebar_set_size() adjusts BAR size for both normal and IOV BARs. The
struct pci_sriov keeps a cached copy of BAR size in ->barsz[] which is not
adjusted by pci_rebar_set_size() but by pci_iov_resource_set_size().
pci_iov_resource_set_size() is called also from
pci_resize_resource_set_size().
The current arrangement is problematic once BAR resize algorithm starts to
roll back changes properly in case of a failure. The normal resource
fitting algorithm rolls back resource size using the struct
pci_dev_resource easily but also calling pci_resize_resource_set_size() or
pci_iov_resource_set_size() to roll back BAR size would be an extra burden,
whereas combining ->barsz[] update with pci_rebar_set_size() naturally
rolls back it when restoring the old BAR size on a different layer of the
BAR resize operation.
Thus, rework pci_rebar_set_size() to also update ->barsz[].
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org> # AVA, AMD GPU
Link: https://patch.msgid.link/20251113162628.5946-3-ilpo.jarvinen@linux.intel.com
pbus_reassign_bridge_resources() saves bridge windows into the saved
list before attempting to adjust resource assignments to perform a BAR
resize operation. If resource adjustments cannot be completed fully,
rollback is attempted by restoring the resource from the saved list.
The rollback, however, does not check whether the resources it restores were
assigned by the partial resize attempt. If restore changes addresses of the
resource, it can result in corrupting the resource tree.
An example of a corrupted resource tree with overlapping addresses:
6200000000000-6203fbfffffff : pciex@620c3c0000000
6200000000000-6203fbff0ffff : PCI Bus 0030:01
6200020000000-62000207fffff : 0030:01:00.0
6200000000000-6203fbff0ffff : PCI Bus 0030:02
A resource that are assigned into the resource tree must remain
unchanged. Thus, release such a resource before attempting to restore
and claim it back.
For simplicity, always do the release and claim back for the resource
even in the cases where it is restored to the same address range.
Note: this fix may "break" some cases where devices "worked" because
the resource tree corruption allowed address space double counting to
fit more resource than what can now be assigned without double
counting. The upcoming changes to BAR resizing should address those
scenarios (to the extent possible).
Fixes: 8bb705e3e7 ("PCI: Add pci_resize_resource() for resizing BARs")
Reported-by: Simon Richter <Simon.Richter@hogyros.de>
Link: https://lore.kernel.org/linux-pci/67840a16-99b4-4d8c-9b5c-4721ab0970a2@hogyros.de/
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Link: https://lore.kernel.org/linux-pci/874irqop6b.fsf@draig.linaro.org/
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org> # AVA, AMD GPU
Link: https://patch.msgid.link/20251113162628.5946-2-ilpo.jarvinen@linux.intel.com
Populate USB wake events for Tegra234 XUSB host controller.
These wake-up events are optional to maintain backward compatibility and
because the USB controller does not require them for normal operation.
Signed-off-by: Haotien Hsu <haotienh@nvidia.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add to the known supported SEV-SNP policy bits that don't require any
implementation support from KVM in order to successfully use them.
At this time, this includes:
- CXL_ALLOW
- MEM_AES_256_XTS
- RAPL_DIS
- CIPHERTEXT_HIDING_DRAM
- PAGE_SWAP_DISABLE
Arguably, RAPL_DIS and CIPHERTEXT_HIDING_DRAM require KVM and the CCP
driver to enable these features in order for the setting of the policy
bits to be successfully handled. But, a guest owner may not wish their
guest to run on a system that doesn't provide support for those features,
so allowing the specification of these bits accomplishes that. Whether
or not the bit is supported by SEV firmware, a system that doesn't support
these features will either fail during the KVM validation of supported
policy bits before issuing the LAUNCH_START or fail during the
LAUNCH_START.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://patch.msgid.link/ec040de9864099cf592a97c201dc4cc110b2b0cf.1761593632.git.thomas.lendacky@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Supported policy bits are dependent on the level of SEV firmware that is
currently running. Create an API to return the supported policy bits for
the current level of firmware.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://patch.msgid.link/e3f711366ddc22e3dd215c987fd2e28dc1c07f54.1761593632.git.thomas.lendacky@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add USB wake events for Tegra234 so that system can be woken up from
suspend when USB devices hot-plug/unplug event is detected.
Signed-off-by: Haotien Hsu <haotienh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Consolidate SEV policy bit definitions into a single file. Use
include/linux/psp-sev.h to hold the definitions and remove the current
definitions from the arch/x86/kvm/svm/sev.c and arch/x86/include/svm.h
files.
No functional change intended.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://patch.msgid.link/d9639f88a0b521a1a67aeac77cc609fdea1f90bd.1761593632.git.thomas.lendacky@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
-----BEGIN PGP SIGNATURE-----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=sIJv
-----END PGP SIGNATURE-----
Merge tag 'block-6.18-20251114' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixlet from Jens Axboe:
"Been sitting on this one for a week or two, planning on sending it out
when there were other block changes for 6.18. But as that hasn't
materialized in the second week of sitting on it, let's flush it out.
A previous commit updated my git tree locations, but one was missed as
it was already set to the git.kernel.org one. But the git location swap
also renamed the actual tree from linux-block to just linux, let's get
that last one updated too"
* tag 'block-6.18-20251114' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
MAINTAINERS: correct git location for block layer tree
Conform the layout, informational and status messages to KTAP. No
functional change is intended other than the layout of output messages.
Signed-off-by: Guopeng Zhang <zhangguopeng@kylinos.cn>
Suggested-by: Sebastian Chlad <sebastian.chlad@suse.com>
Acked-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Enable the preset of filter parameters from kconfig options, similar to
how other KUnit configuration parameters are handled already.
This is useful to run a subset of tests even if the cmdline is not
readily modifyable.
Link: https://lore.kernel.org/r/20251106-kunit-filter-kconfig-v1-1-d723fb7ac221@linutronix.de
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=sd1e
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.18-20251113' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Use the actual segments in a request when for bvec based buffers
- Fix an odd case where the iovec might get leaked for a read/write
request, if it was newly allocated, overflowed the alloc cache, and
hit an early error
- Minor tweak to the query API added in this release, returning the
number of available entries
* tag 'io_uring-6.18-20251113' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/rsrc: don't use blk_rq_nr_phys_segments() as number of bvecs
io_uring/query: return number of available queries
io_uring/rw: ensure allocated iovec gets cleared for early failure
Calculate packet parameters for video mode same way it is done for
command mode, by halving timings plugged into equations.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20250909073335.91531-3-clamor95@gmail.com
Simplify the code by removing local variable @inc. The variable is not
used elsewhere, remove it and directly increment the target number.
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Link: https://patch.msgid.link/20251114075844.1315805-4-rrichter@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Simplify the xor arithmetric setup code by grouping it in a single
block. No need to split the block for QoS setup.
It is safe to reorder the call of cxl_setup_extended_linear_cache()
because there are no dependencies.
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Tested-by: Gregory Price <gourry@gourry.net>
Link: https://patch.msgid.link/20251114075844.1315805-3-rrichter@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
A root decoder's callback handlers are collected in struct cxl_rd_ops.
The structure is dynamically allocated, though it contains only a few
pointers in it. This also requires to check two pointes to check for
the existence of a callback.
Simplify the allocation, release and handler check by embedding the
ops statically in struct cxl_root_decoder.
Implementation is equivalent to how struct cxl_root_ops handles the
callbacks.
[ dj: Fix spelling error in commit log. ]
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Link: https://patch.msgid.link/20251114075844.1315805-2-rrichter@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Move the Cadence PCIe controller RP common functions into a separate file.
The common library functions are split from legacy PCIe RP controller
functions to a separate file.
Signed-off-by: Manikandan K Pillai <mpillai@cadence.com>
[mani: removed the unused variable]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251108140305.1120117-4-hans.zhang@cixtech.com
Split the Cadence PCIe header file by moving the Legacy (LGA) controller
register definitions to a separate header file for support of next
generation PCIe controller architecture.
Signed-off-by: Manikandan K Pillai <mpillai@cadence.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251108140305.1120117-3-hans.zhang@cixtech.com
Optimize performance of syncpoint interrupt handling by reading
the status register in 64-bit chunks when possible, and skipping
processing when the read value is zero.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20250917-host1x-syncpt-irq-perf-v2-1-736ef69b1347@nvidia.com
A test case for a situation when widen_imprecise_scalars() is called
with old->allocated_stack > cur->allocated_stack. Test structure:
def widening_stack_size_bug():
r1 = 0
for r6 in 0..1:
iterator_with_diff_stack_depth(r1)
r1 = 42
def iterator_with_diff_stack_depth(r1):
if r1 != 42:
use 128 bytes of stack
iterator based loop
iterator_with_diff_stack_depth() is verified with r1 == 0 first and
r1 == 42 next. Causing stack usage of 128 bytes on a first visit and 8
bytes on a second. Such arrangement triggered a KASAN error in
widen_imprecise_scalars().
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251114025730.772723-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The usage pattern for widen_imprecise_scalars() looks as follows:
prev_st = find_prev_entry(env, ...);
queued_st = push_stack(...);
widen_imprecise_scalars(env, prev_st, queued_st);
Where prev_st is an ancestor of the queued_st in the explored states
tree. This ancestor is not guaranteed to have same allocated stack
depth as queued_st. E.g. in the following case:
def main():
for i in 1..2:
foo(i) // same callsite, differnt param
def foo(i):
if i == 1:
use 128 bytes of stack
iterator based loop
Here, for a second 'foo' call prev_st->allocated_stack is 128,
while queued_st->allocated_stack is much smaller.
widen_imprecise_scalars() needs to take this into account and avoid
accessing bpf_verifier_state->frame[*]->stack out of bounds.
Fixes: 2793a8b015 ("bpf: exact states comparison for iterator convergence checks")
Reported-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251114025730.772723-1-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tomas will start taking over managing the changes to the Real-time Linux
Analysis (RTLA) tool. Make him officially one of the maintainers.
Also update the RTLA entry to include the linux-kernel mailing list as
well as list the patchwork and git repository that the patches will go
through.
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Crystal Wood <crwood@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://patch.msgid.link/20251112113556.47ec9d12@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Commit b6bcbce335 ("soc/tegra: pmc: Ensure power-domains are in a
known state") was introduced so that all power domains get initialized
to a known working state when booting and it does this by shutting them
down (including asserting resets and disabling clocks) before registering
each power domain with the genpd framework, leaving it to each driver to
later on power its needed domains.
This caused the Google Pixel C to hang when booting due to a workaround
in the DSI driver introduced in commit b22fd0b963 ("drm/tegra: dsi:
Clear enable register if powered by bootloader") meant to handle the case
where the bootloader enabled the DSI hardware module. The workaround relies
on reading a hardware register to determine the current status and after
b6bcbce335 that now happens in a powered down state thus leading to
the boot hang.
Fix this by reverting b22fd0b963 since currently we are guaranteed
that the hardware will be fully reset by the time we start enabling the
DSI module.
Fixes: b6bcbce335 ("soc/tegra: pmc: Ensure power-domains are in a known state")
Cc: stable@vger.kernel.org
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20251103-diogo-smaug_ec_typec-v1-1-be656ccda391@tecnico.ulisboa.pt
Add a call to put_pid() corresponding to get_task_pid().
host1x_memory_context_alloc() does not take ownership of the PID so we
need to free it here to avoid leaking.
Signed-off-by: Prateek Agarwal <praagarwal@nvidia.com>
Fixes: e09db97889 ("drm/tegra: Support context isolation")
[mperttunen@nvidia.com: reword commit message]
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20250919-host1x-put-pid-v1-1-19c2163dfa87@nvidia.com
There are 2 identical "select DRM_EXEC" lines for DRM_XE.
Remove one to clean up the configuration.
Fixes: d490ecf577 ("drm/xe: Rework xe_exec and the VM rebind worker to use the drm_exec helper")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Nitin Gote <nitin.r.gote@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patch.msgid.link/20251110232657.1807998-2-shuicheng.lin@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
After commit d6ace46c82 ("ext4: remove obsolete EXT3 config options")
was added, when using the 'tegra_defconfig' kernel configuration,
mounting an MMC device on Tegra20, Tegra30 and Tegra124 boards is
failing with "unknown filesystem type 'ext4'". Fix this by updating the
'tegra_defconfig' to use the EXT4 config options and remove the
obselete EXT2/3 options.
Fixes: d6ace46c82 ("ext4: remove obsolete EXT3 config options")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Tegra210 actmon is compatible with the existing Tegra124 driver.
Describe the compatibles as such.
Acked-by: Chanwoo Choi <cw00c.choi@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
driver_find_device() calls get_device() to increment the reference
count once a matching device is found, but there is no put_device() to
balance the reference count. To avoid reference count leakage, add
put_device() to decrease the reference count.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: a31500fe70 ("drm/tegra: dc: Restore coupling of display controllers")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Acked-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20251022114720.24937-1-make24@iscas.ac.cn
syzbot found that cls_bpf_classify() is able to change
tc_skb_cb(skb)->drop_reason triggering a warning in sk_skb_reason_drop().
WARNING: CPU: 0 PID: 5965 at net/core/skbuff.c:1192 __sk_skb_reason_drop net/core/skbuff.c:1189 [inline]
WARNING: CPU: 0 PID: 5965 at net/core/skbuff.c:1192 sk_skb_reason_drop+0x76/0x170 net/core/skbuff.c:1214
struct tc_skb_cb has been added in commit ec624fe740 ("net/sched:
Extend qdisc control block with tc control block"), which added a wrong
interaction with db58ba4592 ("bpf: wire in data and data_end for
cls_act_bpf").
drop_reason was added later.
Add bpf_prog_run_data_pointers() helper to save/restore the net_sched
storage colliding with BPF data_meta/data_end.
Fixes: ec624fe740 ("net/sched: Extend qdisc control block with tc control block")
Reported-by: syzbot <syzkaller@googlegroups.com>
Closes: https://lore.kernel.org/netdev/6913437c.a70a0220.22f260.013b.GAE@google.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20251112125516.1563021-1-edumazet@google.com
The MOCS kunit test calls KUNIT_ASSERT_TRUE_MSG() with a condition of
'true;' this prevents the assertion from ever failing. Replace
KUNIT_ASSERT_TRUE_MSG with KUNIT_FAIL_AND_ABORT to get the intended
failure behavior in cases where forcewake was not acquired successfully.
Fixes: 51c0ee84e4 ("drm/xe/tests/mocs: Hold XE_FORCEWAKE_ALL for LNCF regs")
Cc: Tejas Upadhyay <tejas.upadhyay@intel.com>
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20251113234038.2256106-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Make sure to drop the reference taken to the AHB platform device when
looking up its driver data while enabling the SMMU.
Note that holding a reference to a device does not prevent its driver
data from going away.
Fixes: 89c788bab1 ("ARM: tegra: Add SMMU enabler in AHB")
Cc: stable@vger.kernel.org # 3.5
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Mi Pad is a tablet computer based on Nvidia Tegra K1 SoC which
originally ran the Android operating system. The Mi Pad has a 7.9" IPS
display with 1536 x 2048 (324 ppi) resolution. 2 GB of RAM and 16/64 GB
of internal memory that can be supplemented with a microSDXC card giving
up to 128 GB of additional storage.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The "aotog" is an optional aperture, so if that aperture is not defined
for a given device, then initialise the 'aotag' pointer to NULL instead
of returning an error. Note that the PMC driver will not use 'aotag'
pointer if initialised to NULL.
Co-developed-by: Shardar Mohammed <smohammed@nvidia.com>
Signed-off-by: Shardar Mohammed <smohammed@nvidia.com>
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Now that the DC analog connector support and VCE1 support landed,
amdgpu is at feature parity with the old radeon driver
on SI dGPUs.
Enabling the amdgpu driver by default for SI dGPUs has the
following benefits:
- More stable OpenGL support through RadeonSI
- Vulkan support through RADV
- Improved performance
- Better display features through DC
Users who want to keep using the old driver can do so using:
amdgpu.si_support=0 radeon.si_support=1
v2:
- Update documentation in Kconfig file
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The amdgpu driver has been working well on CIK dGPUs for years.
Now that the DC analog connector support landed,
amdgpu is at feature parity with the old radeon driver
on CIK dGPUs.
Enabling the amdgpu driver by default for CIK dGPUs has the
following benefits:
- More stable OpenGL support through RadeonSI
- Vulkan support through RADV
- Improved performance
- Better display features through DC
Users who want to keep using the old driver can do so using:
amdgpu.cik_support=0 radeon.cik_support=1
v2:
- Update documentation in Kconfig file
v3:
- Rebase documentation updates (Alex)
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This code only applies to amdgpu processing
poison consumption after uniras is enabled,
but not to sriov.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise job submissions can fail with ENOMEM.
We probably need to re-design the per VMID tracking at some point.
Signed-off-by: Christian König <christian.koenig@amd.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4258
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When we run out of VMIDs we need to wait for some to become available.
Previously we were using a dma_fence_array for that, but this means that
we have to allocate memory.
Instead just wait for the first not signaled fence from the least recently
used VMID to signal. That is not as efficient since we end up in this
function multiple times again, but allocating memory can easily fail or
deadlock if we have to wait for memory to become available.
v2: remove now unused VM manager fields
v3: fix dma_fence reference
Signed-off-by: Christian König <christian.koenig@amd.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4258
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The amd-smi tool relies on extended peer link information to report xgmi
link metrics. The necessary xgmi ta command, GET_EXTEND_PEER_LINKS, has
been enabled in the host driver and this change is necessary for the
guest to make use of it. To handle the case where the host driver does
not have the latest xgmi ta, the guest driver checks for guest support
through a pf2vf feature flag before invoking psp.
Signed-off-by: Will Aitken <wiaitken@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adds new sriov msg flag to match host, feature flag in the amdgim
enum, and a wrapper macro to check it.
Signed-off-by: Will Aitken <wiaitken@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_xgmi_fill_topology_info and psp_xgmi_reflect_topology_info
perform the same logic of copying topology info of one node to every
other node in the hive. Instead of having two functions that purport to
do the same thing, this refactoring moves the logic of the fill function
to the reflect function and adds reflecting port number info as well for
complete functionality.
Signed-off-by: Will Aitken <wiaitken@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
