Documentation build reported:
Warning: block/blk-mq-dma.c:373 expecting prototype for blk_rq_integrity_dma_map_iter_start(). Prototype was for blk_rq_integrity_dma_map_iter_next() instead
The kernel-doc comment above `blk_rq_integrity_dma_map_iter_next()` used
the wrong function name (`blk_rq_integrity_dma_map_iter_start`) in its
header. This patch corrects the function name in the kernel-doc block to
match the actual implementation, ensuring clean documentation builds.
Fixes: fec9b16dc5 ("blk-mq-dma: add scatter-less integrity data DMA mapping")
Signed-off-by: Kriish Sharma <kriish.sharma2006@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The data segment gaps the block layer tracks doesn't apply to bio's that
don't have data. Skip calculating this to fix a NULL pointer access.
Fixes: 2f6b2565d4 ("block: accumulate memory segment gaps per bio")
Reported-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Yu Kuai <yukuai@fnnas.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove all remaining Wi-Fi 7 header dependencies from dp_mon.c to
finalize separation of Wi-Fi 7 specific monitor mode functionality.
Remove these includes from dp_mon.c:
- wifi7/hal_desc.h
- wifi7/hal_qcn9274.h
- wifi7/dp_rx.h
Relocate hal_mon_buf_ring from wifi7/hal_desc.h to hal.h.
Relocate HAL_RX_UL_OFDMA_USER_INFO_V0_W0_VALID and HAL_RX_FCS_LEN
macros from wifi7/hal_rx.h to hal.h or dp_rx.h as appropriate.
Move the following functions to the new file wifi7/dp_mon.c
and add the ath12k_wifi7 prefix:
- ath12k_dp_mon_rx_merg_msdus()
- ath12k_dp_mon_update_radiotap()
- ath12k_dp_mon_rx_deliver_msdu()
- ath12k_dp_mon_get_buf_len()
- ath12k_dp_mon_rx_deliver()
Export several helper functions needed by the ath12k_wifi7 module.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1
Signed-off-by: Alok Singh <quic_aloksing@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251110103713.3484779-13-quic_aloksing@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Separate Wi-Fi 7-specific monitor handling from ath12k common code to
improve modularity.
Move the following MSDU END TLV processing functions into wifi7/dp_mon.c
and rename them with the ath12k_wifi7_ prefix:
- ath12k_dp_mon_parse_rx_msdu_end_err()
- ath12k_dp_mon_parse_status_msdu_end()
- ath12k_dp_mon_next_link_desc_get()
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1
Signed-off-by: Alok Singh <quic_aloksing@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251110103713.3484779-12-quic_aloksing@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Move Wi-Fi 7-specific monitor functionality out of ath12k common code
into the Wi-Fi 7 module to improve modularity.
Move and rename the following MU user processing functions to
wifi7/dp_mon.c with the ath12k_wifi7_ prefix:
- ath12k_dp_mon_rx_handle_ofdma_info()
- ath12k_dp_mon_rx_populate_mu_user_info()
- ath12k_dp_mon_hal_rx_parse_user_info()
Move the helper functions hal_rx_mon_hal_ru_size_to_ath12k_ru_size and
hal_rx_ul_ofdma_ru_size_to_width to the Wi-Fi 7 module, and export the
helpers required by the ath12k_wifi7 code. Isolate the parsing of
MU-specific user information within the Wi-Fi 7 module to keep
common code generic.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1
Signed-off-by: Alok Singh <quic_aloksing@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251110103713.3484779-11-quic_aloksing@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
The ath12k common monitor path still contains Wi-Fi 7 specific
SIG TLV parsing. Move these SIG TLV parsing to the Wi-Fi 7
module to improve modularity.
Relocate the following functions into wifi7/dp_mon.c and
rename them with the ath12k_wifi7_ prefix:
- ath12k_dp_mon_parse_l_sig_b()
- ath12k_dp_mon_parse_l_sig_a()
- ath12k_dp_mon_hal_rx_parse_u_sig_cmn()
- ath12k_dp_mon_hal_rx_parse_u_sig_tb()
- ath12k_dp_mon_hal_rx_parse_u_sig_mu()
- ath12k_dp_mon_hal_rx_parse_u_sig_hdr()
Export the helper symbols needed by the Wi-Fi 7 module.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1
Signed-off-by: Alok Singh <quic_aloksing@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251110103713.3484779-10-quic_aloksing@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Split Wi-Fi 7 specific EHT SIG parsing out of ath12k common
code into the Wi-Fi 7 module to improve modularity.
Move the following EHT SIG processing functions to wifi7/dp_mon.c and
add the ath12k_wifi7 prefix to each relocated function.
- ath12k_dp_mon_hal_aggr_tlv()
- ath12k_dp_mon_hal_rx_is_frame_type_ndp()
- ath12k_dp_mon_hal_rx_is_non_ofdma()
- ath12k_dp_mon_hal_rx_is_ofdma()
- ath12k_dp_mon_hal_rx_parse_eht_sig_ndp()
- ath12k_dp_mon_hal_rx_parse_usig_overflow()
- ath12k_dp_mon_hal_rx_parse_non_ofdma_users()
- ath12k_dp_mon_hal_rx_parse_eht_mumimo_user()
- ath12k_dp_mon_hal_rx_parse_eht_non_mumimo_user()
- ath12k_dp_mon_hal_rx_is_mu_mimo_user()
- ath12k_dp_mon_hal_rx_parse_eht_sig_non_ofdma()
- ath12k_dp_mon_hal_rx_parse_ru_allocation()
- ath12k_dp_mon_hal_rx_parse_eht_sig_ofdma()
- ath12k_dp_mon_parse_eht_sig_hdr()
Export helper functions needed by the ath12k_wifi7 module.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1
Signed-off-by: Alok Singh <quic_aloksing@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251110103713.3484779-9-quic_aloksing@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Separate Wi-Fi 7-specific monitor code from ath12k common code to
improve modularity.
Move following HE SIG processing functions to the wifi7/dp_mon.c and
rename the relocated functions with the ath12k_wifi7 prefix:
- ath12k_dp_mon_parse_he_sig_b2_ofdma()
- ath12k_dp_mon_parse_he_sig_b2_mu()
- ath12k_dp_mon_parse_he_sig_b1_mu()
- ath12k_dp_mon_parse_he_sig_mu()
- ath12k_dp_mon_parse_he_sig_su()
Export helper functions required by the ath12k_wifi7 module.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1
Signed-off-by: Alok Singh <quic_aloksing@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251110103713.3484779-8-quic_aloksing@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Separate Wi-Fi 7-specific monitor parsing from ath12k common code
to improve modularity and keep Wi-Fi 7 logic within the Wi-Fi 7 module.
Move following HT/VHT SIG parsing functions to wifi7/dp_mon.c and
rename the functions with the ath12k_wifi7 prefix:
- ath12k_dp_mon_parse_vht_sig_a()
- ath12k_dp_mon_parse_ht_sig()
Export helper functions required by the ath12k_wifi7 module.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1
Signed-off-by: Alok Singh <quic_aloksing@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251110103713.3484779-7-quic_aloksing@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Split Wi-Fi 7-specific monitor code out of ath12k common code
to improve modularity.
Move following RX status TLV parsing functions to the new file
wifi7/dp_mon.c and rename the helpers with the ath12k_wifi7_ prefix:
- ath12k_dp_mon_rx_parse_status_tlv()
- ath12k_dp_mon_parse_rx_dest_tlv()
Export helper functions required by the Wi-Fi 7 module.
Temporarily include wifi7/hal_rx.h from dp_mon.h to provide
HAL structure definitions; remove this dependency in a later patch.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1
Signed-off-by: Alok Singh <quic_aloksing@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251110103713.3484779-5-quic_aloksing@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Separate Wi-Fi 7-specific monitor code from ath12k common
code to improve modularity.
Move the following monitor MPDU pop function to the new
file wifi7/dp_mon.c and rename them with the ath12k_wifi7_ prefix:
- ath12k_dp_rx_mon_mpdu_pop()
Export helper functions required by the ath12k_wifi7 module.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1
Signed-off-by: Alok Singh <quic_aloksing@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251110103713.3484779-4-quic_aloksing@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Split Wi-Fi 7-specific monitor status processing out of ath12k common
code and into the Wi-Fi 7 module to improve modularity.
Move the following functions to wifi7/dp_mon.c and rename them with the
ath12k_wifi7_ prefix:
- ath12k_dp_mon_rx_parse_mon_status()
- ath12k_dp_rx_reap_mon_status_ring()
- ath12k_dp_mon_parse_rx_dest()
- ath12k_dp_rx_mon_buf_done()
- ath12k_dp_rx_mon_dest_process()
- ath12k_dp_mon_rx_memset_ppdu_info()
Export helper functions required by the Wi-Fi 7 monitor path.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1
Signed-off-by: Alok Singh <quic_aloksing@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251110103713.3484779-3-quic_aloksing@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Separate Wi-Fi 7-specific monitor-mode processing from common
ath12k data path code to improve modularity.
Move monitor status ring processing to wifi7/dp_mon.c:
- ath12k_dp_mon_srng_process()
- __ath12k_dp_mon_process_ring()
- ath12k_dp_mon_process_ring()
Rename the above to use the ath12k_wifi7_ prefix and
export helper functions required by the ath12k_wifi7 module.
Update the Wi-Fi 7 module Makefile to build dp_mon.o.
No functional changes are intended; this is preparatory refactoring
to isolate Wi-Fi 7 monitor-mode code from shared ath12k code.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1
Signed-off-by: Alok Singh <quic_aloksing@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251110103713.3484779-2-quic_aloksing@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
commit 02f312754c ("ntfs3: fix use-after-free of sbi->options in cmp_fnames") introduced a use-after-free bug
due to improper handling of sbi->options in error paths. This resulted in crashes when superblock cleanup
is performed in ntfs_put_super.
This patch ensures that the options structure and its subfields are properly freed, preventing the memory
corruption and use-after-free errors.
Fixes: 02f312754c ("ntfs3: fix use-after-free of sbi->options in cmp_fnames")
Reported-by: syzbot+cc433e4cd6d54736bf80@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=cc433e4cd6d54736bf80
Signed-off-by: YangWen <anmuxixixi@gmail.com>
[almaz.alexandrovich@paragon-software.com: added fixes and closes tags]
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Commit e26ee4efbc ("fuse: allocate ff->release_args only if release is
needed") skips allocating ff->release_args if the server does not
implement open. However in doing so, fuse_prepare_release() now skips
grabbing the reference on the inode, which makes it possible for an
inode to be evicted from the dcache while there are inflight readahead
requests. This causes a deadlock if the server triggers reclaim while
servicing the readahead request and reclaim attempts to evict the inode
of the file being read ahead. Since the folio is locked during
readahead, when reclaim evicts the fuse inode and fuse_evict_inode()
attempts to remove all folios associated with the inode from the page
cache (truncate_inode_pages_range()), reclaim will block forever waiting
for the lock since readahead cannot relinquish the lock because it is
itself blocked in reclaim:
>>> stack_trace(1504735)
folio_wait_bit_common (mm/filemap.c:1308:4)
folio_lock (./include/linux/pagemap.h:1052:3)
truncate_inode_pages_range (mm/truncate.c:336:10)
fuse_evict_inode (fs/fuse/inode.c:161:2)
evict (fs/inode.c:704:3)
dentry_unlink_inode (fs/dcache.c:412:3)
__dentry_kill (fs/dcache.c:615:3)
shrink_kill (fs/dcache.c:1060:12)
shrink_dentry_list (fs/dcache.c:1087:3)
prune_dcache_sb (fs/dcache.c:1168:2)
super_cache_scan (fs/super.c:221:10)
do_shrink_slab (mm/shrinker.c:435:9)
shrink_slab (mm/shrinker.c:626:10)
shrink_node (mm/vmscan.c:5951:2)
shrink_zones (mm/vmscan.c:6195:3)
do_try_to_free_pages (mm/vmscan.c:6257:3)
do_swap_page (mm/memory.c:4136:11)
handle_pte_fault (mm/memory.c:5562:10)
handle_mm_fault (mm/memory.c:5870:9)
do_user_addr_fault (arch/x86/mm/fault.c:1338:10)
handle_page_fault (arch/x86/mm/fault.c:1481:3)
exc_page_fault (arch/x86/mm/fault.c:1539:2)
asm_exc_page_fault+0x22/0x27
Fix this deadlock by allocating ff->release_args and grabbing the
reference on the inode when preparing the file for release even if the
server does not implement open. The inode reference will be dropped when
the last reference on the fuse file is dropped (see fuse_file_put() ->
fuse_release_end()).
Fixes: e26ee4efbc ("fuse: allocate ff->release_args only if release is needed")
Cc: stable@vger.kernel.org
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reported-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Use helper function devm_auxiliary_device_create() to remove some
boilerplate code.
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20251024-auxiliary-v2-1-a353dc9e6b1a@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Some of the PCCs on i.MX8ULP have a sw_rst bit to control the peripheral
reset through SW method. For peripherals like GPU that need sync reset,
some delay is necessary befere & after release the reset to make sure the
HW is reset into a known status. So add some delay before & after release
reset.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20250801072153.1974428-1-ping.bai@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
ublk_map_io() and ublk_unmap_io() never return negative values, and
their return values are stored in variables of type unsigned. Clarify
that they can't fail by making their return types unsigned.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ub = iocb->ki_filp->private_data cannot be NULL, as it's set in
ublk_ch_open() before it returns succesfully. req->mq_hctx cannot be
NULL as any inflight ublk request must belong to some queue. And
req->mq_hctx->driver_data cannot be NULL as it's set to the ublk_queue
pointer in ublk_init_hctx(). So drop the unnecessary checks.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_uring_sanitise_params() sanitises most of the setup flags invariants,
move the IORING_SETUP_FLAGS check from io_uring_setup() into it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
mem_is_zero() does the job without hand rolled loops, use that to verify
reserved fields of ring params.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no need to pass the user requested number of SQ entries
separately from the main parameter structure io_uring_params. Initialise
it at the beginning and stop passing it in favour of struct
io_uring_params::sq_entries.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There has been type related issues with region size calculation, add an
utility helper function that returns the size and handles type
conversions right.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of having an array of a calculated size as a buffer, put all
query uapi structures into a union and pass that around. That way
everything is well typed, and the compiler will prevent opcode handling
using a structure not accounted into the buffer size.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
netdev ops must be called under instance lock or rtnl_lock, but
io_register_zcrx_ifq() isn't doing this for netdev_queue_get_dma_dev().
Fix this by taking the instance lock using netdev_get_by_index_lock().
Extended the instance lock section to include attaching a memory
provider. Could not move io_zcrx_create_area() outside, since the dmabuf
codepath IORING_ZCRX_AREA_DMABUF requires ifq->dev.
Fixes: 59b8b32ac8 ("io_uring/zcrx: add support for custom DMA devices")
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Need to call netdev_get_by_index_lock() from io_uring/zcrx.c, but it is
currently private to net. Export the function in linux/netdevice.h.
Signed-off-by: David Wei <dw@davidwei.uk>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, CQs without a completion function are assigned the
mlx5_add_cq_to_tasklet function by default. This is problematic since
only user CQs created through the mlx5_ib driver are intended to use
this function.
Additionally, all CQs that will use doorbells instead of polling for
completions must call mlx5_cq_arm. However, the default CQ creation flow
leaves a valid value in the CQ's arm_db field, allowing FW to send
interrupts to polling-only CQs in certain corner cases.
These two factors would allow a polling-only kernel CQ to be triggered
by an EQ interrupt and call a completion function intended only for user
CQs, causing a null pointer exception.
Some areas in the driver have prevented this issue with one-off fixes
but did not address the root cause.
This patch fixes the described issue by adding defaults to the create CQ
flow. It adds a default dummy completion function to protect against
null pointer exceptions, and it sets an invalid command sequence number
by default in kernel CQs to prevent the FW from sending an interrupt to
the CQ until it is armed. User CQs are responsible for their own
initialization values.
Callers of mlx5_core_create_cq are responsible for changing the
completion function and arming the CQ per their needs.
Fixes: cdd04f4d4d ("net/mlx5: Add support to create SQ and CQ for ASO")
Signed-off-by: Akiva Goldberger <agoldberger@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Leon Romanovsky <leon@kernel.org>
Link: https://patch.msgid.link/1762681743-1084694-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For chips with security enabled, it's only possible to load firmware
with a valid signature pattern.
If key_id is not zero, it indicates a security chip, and the driver will
not load the config file.
- Example log for a security chip.
Bluetooth: hci0: RTL: examining hci_ver=0c hci_rev=000a
lmp_ver=0c lmp_subver=8922
Bluetooth: hci0: RTL: rom_version status=0 version=1
Bluetooth: hci0: RTL: btrtl_initialize: key id 1
Bluetooth: hci0: RTL: loading rtl_bt/rtl8922au_fw.bin
Bluetooth: hci0: RTL: cfg_sz 0, total sz 71301
Bluetooth: hci0: RTL: fw version 0x41c0c905
- Example log for a normal chip.
Bluetooth: hci0: RTL: examining hci_ver=0c hci_rev=000a
lmp_ver=0c lmp_subver=8922
Bluetooth: hci0: RTL: rom_version status=0 version=1
Bluetooth: hci0: RTL: btrtl_initialize: key id 0
Bluetooth: hci0: RTL: loading rtl_bt/rtl8922au_fw.bin
Bluetooth: hci0: RTL: loading rtl_bt/rtl8922au_config.bin
Bluetooth: hci0: RTL: cfg_sz 6, total sz 71307
Bluetooth: hci0: RTL: fw version 0x41c0c905
Tested-by: Hilda Wu <hildawu@realtek.com>
Signed-off-by: Nial Ni <niall_ni@realsil.com.cn>
Signed-off-by: Max Chou <max.chou@realtek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Change the debug message to print the correct units instead of always
assuming Gbps, as the value can be in either 100 Mbps or 1 Gbps units.
Fixes: 5da8bc3eff ("net/mlx5e: DCBNL, Add debug messages log")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1762681073-1084058-6-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The previous calculation used roundup() which caused an overflow for
rates between 25.5Gbps and 26Gbps.
For example, a rate of 25.6Gbps would result in using 100Mbps units with
value of 256, which would overflow the 8 bits field.
Simplify the upper_limit_mbps calculation by removing the
unnecessary roundup, and adjust the comparison to use <= to correctly
handle the boundary condition.
Fixes: d8880795da ("net/mlx5e: Implement DCBNL IEEE max rate")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1762681073-1084058-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When trying to set num_doorbells to a value greater than the max number
of channels, the error message was going over the netlink limit of 80
chars, truncating the most important part of the message, the number of
channels.
Fix that by trimming the length a bit.
Fixes: 11bbcfb766 ("net/mlx5e: Use the 'num_doorbells' devlink param")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1762681073-1084058-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Fix a KMSAN kernel-infoleak detected by the syzbot .
[net?] KMSAN: kernel-infoleak in __skb_datagram_iter
In tcf_ife_dump(), the variable 'opt' was partially initialized using a
designatied initializer. While the padding bytes are reamined
uninitialized. nla_put() copies the entire structure into a
netlink message, these uninitialized bytes leaked to userspace.
Initialize the structure with memset before assigning its fields
to ensure all members and padding are cleared prior to beign copied.
This change silences the KMSAN report and prevents potential information
leaks from the kernel memory.
This fix has been tested and validated by syzbot. This patch closes the
bug reported at the following syzkaller link and ensures no infoleak.
Reported-by: syzbot+0c85cae3350b7d486aee@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=0c85cae3350b7d486aee
Tested-by: syzbot+0c85cae3350b7d486aee@syzkaller.appspotmail.com
Fixes: ef6980b6be ("introduce IFE action")
Signed-off-by: Ranganath V N <vnranganath.20@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251109091336.9277-3-vnranganath.20@gmail.com
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The current single-bit error injection mechanism flips bits directly in ECC RAM
by performing write and read operations. When the ECC RAM is actively used by
the Ethernet or USB controller, this approach sometimes trigger a false
double-bit error.
Switch both Ethernet and USB EDAC devices to use the INTTEST register
(altr_edac_a10_device_inject_fops) for single-bit error injection, similar to
the existing double-bit error injection method.
Fixes: 064acbd4f4 ("EDAC, altera: Add Stratix10 peripheral support")
Signed-off-by: Niravkumar L Rabara <niravkumarlaxmidas.rabara@altera.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251111081333.1279635-1-niravkumarlaxmidas.rabara@altera.com
Pull MD changes from Yu:
"- Change maintainer's email address (Yu Kuai)
- Data can be lost if array is created with different lbs devices, fix
this problem and record lbs of the array in metadata (Li Nan)
- Fix rcu protection for md_thread (Yun Zhou)
- Fix mddev kobject lifetime regression (Xiao Ni)
- Enable atomic writes for md-linear (John Garry)
- Some cleanups (Chen Ni, Huiwen He, Wu Guanghao)"
* tag 'md-6.19-20251111' of gitolite.kernel.org:pub/scm/linux/kernel/git/mdraid/linux:
md: allow configuring logical block size
md: add check_new_feature module parameter
md/raid0: Move queue limit setup before r0conf initialization
md: init bioset in mddev_init
md: delete md_redundancy_group when array is becoming inactive
md: prevent adding disks with larger logical_block_size to active arrays
md/raid5: remove redundant __GFP_NOWARN
md: avoid repeated calls to del_gendisk
md/md-llbitmap: Remove unneeded semicolon
md/md-linear: Enable atomic writes
Factor out code into md_should_do_recovery()
md: fix rcu protection in md_wakeup_thread
md: delete mddev kobj before deleting gendisk kobj
MAINTAINERS: Update Yu Kuai's E-mail address
This handles PA Sync Lost event which previously was assumed to be
handled with BIG Sync Lost but their lifetime are not the same thus why
there are 2 different events to inform when each sync is lost.
Fixes: b2a5f2e1c1 ("Bluetooth: hci_event: Add support for handling LE BIG Sync Lost event")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add an ALSA control (CAL_DATA) that can be used to restore amp calibration,
instead of using debugfs. A readback control (CAL_DATA_RB) is also added
for factory testing.
On ChromeOS the process that restores amp calibration from NVRAM has
limited permissions and cannot access debugfs. It requires an ALSA control
that it can write the calibration blob into. ChromeOS also restricts access
to ALSA controls, which avoids the risk of accidental or malicious
overwriting of good calibration data with bad data. As this control is not
needed for normal Linux-based distros it is a Kconfig option.
A separate control, CAL_DATA_RB, provides a readback of the current
calibration data, which could be either from a write to CAL_DATA or the
result of factory production-line calibration.
The write and read are intentionally separate controls to defeat "dumb"
save-and-restore tools like alsa-restore that assume it is safe to save
all control values and write them back in any order at some undefined
future time. Such behavior carries the risk of restoring stale or bad data
over the top of good data.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251111130850.513969-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Create an ALSA control to read the value of the firmware
CAL_SET_STATUS control. This reports whether the firmware is
using a calibration blob or the default calibration from the
.bin file.
The firmware only reports a valid value in this register while
audio is actually playing and the internal PLL is locked to the
audio clock. Otherwise it returns a status of "unknown".
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251111130850.513969-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The RTL8211E ethernet PHY on the Debix Model A board it located at
address 1. Replace the broadcast address with the correct unicast
address.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
For now, we will use ftrace for the fprobe if fp->exit_handler not exists
and CONFIG_DYNAMIC_FTRACE_WITH_REGS is enabled.
However, CONFIG_DYNAMIC_FTRACE_WITH_REGS is not supported by some arch,
such as arm. What we need in the fprobe is the function arguments, so we
can use ftrace for fprobe if CONFIG_DYNAMIC_FTRACE_WITH_ARGS is enabled.
Therefore, use ftrace if CONFIG_DYNAMIC_FTRACE_WITH_REGS or
CONFIG_DYNAMIC_FTRACE_WITH_ARGS enabled.
Link: https://lore.kernel.org/all/20251103063434.47388-1-dongml2@chinatelecom.cn/
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Add the testcase for the fprobe, which will hook the same target with two
fprobe: entry, entry+exit. And the two fprobes will be registered with
different order.
fgraph and ftrace are both used for the fprobe, and this testcase is for
the mixed situation.
Link: https://lore.kernel.org/all/20251015083238.2374294-3-dongml2@chinatelecom.cn/
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
