Signed-off-by: Carlos Maiolino <cem@kernel.org>
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQSmtYVZ/MfVMGUq1GNcsMJ8RxYuYwUCaQyjKAAKCRBcsMJ8RxYu
YzKFAX9wuVlN3K1D10SjpS4v0KXZlEMpeZQi/OD1ypb1W+ce7CCzwQ5EbVlqvbeH
G0T/6xQBf0H0p3CzIRrxQY7lvgqDwKdmouyER5lvCQ+0tZVKd4g2gjE8pDMEn2sd
xIqak0uzEQ==
=17yu
-----END PGP SIGNATURE-----
Merge tag 'xfs-fixes-6.18-rc5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Carlos Maiolino:
"This contain fixes for the RT and zoned allocator, and a few fixes for
atomic writes"
* tag 'xfs-fixes-6.18-rc5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: free xfs_busy_extents structure when no RT extents are queued
xfs: fix zone selection in xfs_select_open_zone_mru
xfs: fix a rtgroup leak when xfs_init_zone fails
xfs: fix various problems in xfs_atomic_write_cow_iomap_begin
xfs: fix delalloc write failures in software-provided atomic writes
Add support for the file descriptor based variant of chdir().
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
blk_rq_map_iter_init() has one line with 7 spaces of indentation and
another that mixes 1 tab and 8 spaces. Convert both to tabs.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is one uaf issue in recv_work when running NBD_CLEAR_SOCK and
NBD_CMD_RECONFIGURE:
nbd_genl_connect // conf_ref=2 (connect and recv_work A)
nbd_open // conf_ref=3
recv_work A done // conf_ref=2
NBD_CLEAR_SOCK // conf_ref=1
nbd_genl_reconfigure // conf_ref=2 (trigger recv_work B)
close nbd // conf_ref=1
recv_work B
config_put // conf_ref=0
atomic_dec(&config->recv_threads); -> UAF
Or only running NBD_CLEAR_SOCK:
nbd_genl_connect // conf_ref=2
nbd_open // conf_ref=3
NBD_CLEAR_SOCK // conf_ref=2
close nbd
nbd_release
config_put // conf_ref=1
recv_work
config_put // conf_ref=0
atomic_dec(&config->recv_threads); -> UAF
Commit 87aac3a80a ("nbd: call nbd_config_put() before notifying the
waiter") moved nbd_config_put() to run before waking up the waiter in
recv_work, in order to ensure that nbd_start_device_ioctl() would not
be woken up while nbd->task_recv was still uncleared.
However, in nbd_start_device_ioctl(), after being woken up it explicitly
calls flush_workqueue() to make sure all current works are finished.
Therefore, there is no need to move the config put ahead of the wakeup.
Move nbd_config_put() to the end of recv_work, so that the reference is
held for the whole lifetime of the worker thread. This makes sure the
config cannot be freed while recv_work is still running, even if clear
+ reconfigure interleave.
In addition, we don't need to worry about recv_work dropping the last
nbd_put (which causes deadlock):
path A (netlink with NBD_CFLAG_DESTROY_ON_DISCONNECT):
connect // nbd_refs=1 (trigger recv_work)
open nbd // nbd_refs=2
NBD_CLEAR_SOCK
close nbd
nbd_release
nbd_disconnect_and_put
flush_workqueue // recv_work done
nbd_config_put
nbd_put // nbd_refs=1
nbd_put // nbd_refs=0
queue_work
path B (netlink without NBD_CFLAG_DESTROY_ON_DISCONNECT):
connect // nbd_refs=2 (trigger recv_work)
open nbd // nbd_refs=3
NBD_CLEAR_SOCK // conf_refs=2
close nbd
nbd_release
nbd_config_put // conf_refs=1
nbd_put // nbd_refs=2
recv_work done // conf_refs=0, nbd_refs=1
rmmod // nbd_refs=0
Reported-by: syzbot+56fbf4c7ddf65e95c7cc@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/6907edce.a70a0220.37351b.0014.GAE@google.com/T/
Fixes: 87aac3a80a ("nbd: make the config put is called before the notifying the waiter")
Depends-on: e2daec488c ("nbd: Fix hungtask when nbd_config_put")
Signed-off-by: Zheng Qixing <zhengqixing@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
I've been running into issues with the linux.dev email
semi-periodically, switching to my kernel.org address while I go figure
out a better home for my inbox.
Signed-off-by: Oliver Upton <oupton@kernel.org>
Link: https://patch.msgid.link/20251107012830.1708225-1-oupton@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Zenghui reports that running a KVM guest with an assigned device and
lockdep enabled produces an unfriendly splat due to an inconsistent irq
context when taking the lpi_xa's spinlock.
This is no good as in rare cases the last reference to an LPI can get
dropped after injection of a cached LPI translation. In this case,
vgic_put_irq() will release the IRQ struct and take the lpi_xa's
spinlock to erase it from the xarray.
Reinstate the IRQ ordering and update the lockdep hint accordingly. Note
that there is no irqsave equivalent of might_lock(), so just explictly
grab and release the spinlock on lockdep kernels.
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Closes: https://lore.kernel.org/kvmarm/b4d7cb0f-f007-0b81-46d1-998b15cc14bc@huawei.com/
Fixes: 982f31bbb5 ("KVM: arm64: vgic-v3: Don't require IRQs be disabled for LPI xarray lock")
Signed-off-by: Oliver Upton <oupton@kernel.org>
Link: https://patch.msgid.link/20251107184847.1784820-2-oupton@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
The gen_compile_commands.py script currently only creates entries for the
primary source files found in .cmd files, but some kernel source files
text-include others (i.e. kernel/sched/build_policy.c).
This prevents tools like clangd from working properly on text-included c
files, such as kernel/sched/ext.c because the generated compile_commands.json
does not have entries for them.
Extend process_line() to detect when a source file includes .c files, and
generate additional compile_commands.json entries for them. For included c
files, use the same compile flags as their parent and add their parents headers.
This enables lsp tools like clangd to work properly on files like
kernel/sched/ext.c
Signed-off-by: Pat Somaru <patso@likewhatevs.io>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Justin Stitt <justinstitt@google.com>
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://patch.msgid.link/20251008004615.2690081-1-patso@likewhatevs.io
Signed-off-by: Nicolas Schier <nsc@kernel.org>
Since commit d6fc9fcbaa ("kbuild: compile-test exported headers to
ensure they are self-contained"), the UAPI headers are compile tested
standalone with the compiler. This compile testing will catch a missing
include of types.h, making the types.h checking in headers_check.pl
originally added in commit 483b41218f ("kbuild: add checks for include
of linux/types in userspace headers") obsolete.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://patch.msgid.link/20251023-headers-pl-drop-check-sizes-v1-1-18bd21cf8f5e@kernel.org
Signed-off-by: Nicolas Schier <nsc@kernel.org>
Since commit e88ca24319 ("kbuild: consolidate warning flags in
scripts/Makefile.extrawarn"), scripts/Makefile.extrawarn contains all
warnings for the main kernel build, not just warnings enabled by the
values for W=. Rename it to scripts/Makefile.warn to make it clearer
that this Makefile is where all Kbuild warning handling should exist.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20251023-rename-scripts-makefile-extrawarn-v1-1-8f7531542169@kernel.org
Signed-off-by: Nicolas Schier <nsc@kernel.org>
Update kbuild entry by my kernel.org address, and change my mailmap
entry appropriately.
Acked-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nicolas Schier <nsc@kernel.org>
The toplevel Makefile already provides the compiler flags necessary to
build userspace applications for the target.
Make use of them instead of duplicating the logic.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20251014-kbuild-uapi-usercflags-v1-1-c162f9059c47@linutronix.de
Signed-off-by: Nicolas Schier <nsc@kernel.org>
This patch adds an example of how to set KBUILD_BUILD_TIMESTAMP to a
specific date. Also, note that the provided timestamp is used for
initramfs mtime fields, which are 32-bit and thus limited to dates
between the Unix epoch and 2106-02-07 06:28:15 UTC. Dates outside this
range will cause errors.
Suggested-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Reviewed-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/20251017021209.6586-1-gang.yan@linux.dev
Signed-off-by: Nicolas Schier <nsc@kernel.org>
When building out-of-tree modules with CONFIG_MODULE_SIG_FORCE=y,
module signing fails because the private key path uses $(srctree)
while the public key path uses $(objtree). Since signing keys are
generated in the build directory during kernel compilation, both
paths should use $(objtree) for consistency.
This causes SSL errors like:
SSL error:02001002:system library:fopen:No such file or directory
sign-file: /kernel-src/certs/signing_key.pem
The issue occurs because:
- sig-key uses: $(srctree)/certs/signing_key.pem (source tree)
- cmd_sign uses: $(objtree)/certs/signing_key.x509 (build tree)
But both keys are generated in $(objtree) during the build.
This complements commit 25ff08aa43 ("kbuild: Fix signing issue for
external modules") which fixed the scripts path and public key path,
but missed the private key path inconsistency.
Fixes out-of-tree module signing for configurations with separate
source and build directories (e.g., O=/kernel-out).
Signed-off-by: Mikhail Malyshev <mike.malyshev@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/20251015163452.3754286-1-mike.malyshev@gmail.com
Signed-off-by: Nicolas Schier <nsc@kernel.org>
The newly introduced -fms-extensions compiler flag allows defining
struct fs_path in such a way that inline_buf becomes a proper array
with a size known to the compiler.
This also makes the problem fixed by commit 8aec9dbf2d ("btrfs: send:
fix -Wflex-array-member-not-at-end warning in struct send_ctx") go away.
Whether cur_inode_path should be put back to its original place in
struct send_ctx I don't know, but at least the comment no longer
applies.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: David Sterba <dsterba@suse.com>
Link: https://patch.msgid.link/20251020142228.1819871-3-linux@rasmusvillemoes.dk
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nicolas Schier <nsc@kernel.org>
Replace timer_delete_sync() with timer_shutdown_sync() and move
it before list_del_rcu() in wakeup_source_remove() to improve the
cleanup ordering and code clarity.
This ensures that the timer is stopped before removing the wakeup
source from the events list, providing a more logical cleanup
sequence.
While the current ordering is functionally correct, stopping the
timer first makes the cleanup flow more intuitive and follows the
general pattern of disabling active components before removing data
structures.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
[ rjw: Subject and changelog edits ]
Link: https://patch.msgid.link/20251027044127.2456365-1-kaushlendra.kumar@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Now that the idreg's GIC field is in sync with the irqchip, limit
the runtime clearing of these fields to the pathological case where
we do not have an in-kernel GIC.
While we're at it, use the existing API instead of open-coded
accessors to access the ID regs.
Fixes: 5cb57a1aff ("KVM: arm64: Zero ID_AA64PFR0_EL1.GIC when no GICv3 is presented to the guest")
Reviewed-by: Oliver Upton <oupton@kernel.org>
Link: https://patch.msgid.link/20251030122707.2033690-4-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Drive the idreg fields indicating the presence of GICv3 directly from
the vgic code. This avoids having to do any sort of runtime clearing
of the idreg.
Fixes: 5cb57a1aff ("KVM: arm64: Zero ID_AA64PFR0_EL1.GIC when no GICv3 is presented to the guest")
Reviewed-by: Oliver Upton <oupton@kernel.org>
Link: https://patch.msgid.link/20251030122707.2033690-3-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
32bit ID registers aren't getting much love these days, and are
often missed in updates. One of these updates broke restoring
a GICv2 guest on a GICv3 machine.
Instead of performing a piecemeal fix, just bite the bullet
and make all 32bit ID regs fully writable. KVM itself never
relies on them for anything, and if the VMM wants to mess up
the guest, so be it.
Fixes: 5cb57a1aff ("KVM: arm64: Zero ID_AA64PFR0_EL1.GIC when no GICv3 is presented to the guest")
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Cc: stable@vger.kernel.org
Reviewed-by: Oliver Upton <oupton@kernel.org>
Link: https://patch.msgid.link/20251030122707.2033690-2-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
In preparation for LAN969x support, all instances referring to defines in
the LAN966x specific header were dropped, so its safe to drop its inclusion
in the driver.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://lore.kernel.org/r/20250924202810.1641883-1-robert.marko@sartura.hr
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
The __GFP_NOWARN flag was included in GFP_NOWAIT since commit
16f5dfbc85 ("gfp: include __GFP_NOWARN in GFP_NOWAIT"). So
remove the redundant __GFP_NOWARN flag.
Link: https://lore.kernel.org/linux-raid/20251102152540.871568-1-hehuiwen@kylinos.cn
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Reviewed-by: Li Nan <linan122@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
There is a uaf problem which is found by case 23rdev-lifetime:
Oops: general protection fault, probably for non-canonical address 0xdead000000000122
RIP: 0010:bdi_unregister+0x4b/0x170
Call Trace:
<TASK>
__del_gendisk+0x356/0x3e0
mddev_unlock+0x351/0x360
rdev_attr_store+0x217/0x280
kernfs_fop_write_iter+0x14a/0x210
vfs_write+0x29e/0x550
ksys_write+0x74/0xf0
do_syscall_64+0xbb/0x380
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7ff5250a177e
The sequence is:
1. rdev remove path gets reconfig_mutex
2. rdev remove path release reconfig_mutex in mddev_unlock
3. md stop calls do_md_stop and sets MD_DELETED
4. rdev remove path calls del_gendisk because MD_DELETED is set
5. md stop path release reconfig_mutex and calls del_gendisk again
So there is a race condition we should resolve. This patch adds a
flag MD_DO_DELETE to avoid the race condition.
Link: https://lore.kernel.org/linux-raid/20251029063419.21700-1-xni@redhat.com
Fixes: 9e59d60976 ("md: call del_gendisk in control path")
Signed-off-by: Xiao Ni <xni@redhat.com>
Suggested-by: Yu Kuai <yukuai@fnnas.com>
Reviewed-by: Li Nan <linan122@huawei.com>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
This reverts commit ebe7556050.
Tested the latest kernel on my GB203 and this seems to break it somehow.
Nov 09 04:16:14 bighp kernel: nouveau 0000:02:00.0: gsp: GSP-FMC boot failed (mbox: 0x0000000b)
Nov 09 04:16:14 bighp kernel: nouveau 0000:02:00.0: gsp: init failed, -5
Nov 09 04:16:14 bighp kernel: nouveau 0000:02:00.0: init failed with -5
Nov 09 04:16:14 bighp kernel: nouveau: drm:00000000:00000080: init failed with -5
Nov 09 04:16:14 bighp kernel: nouveau 0000:02:00.0: drm: Device allocation failed: -5
Nov 09 04:16:14 bighp kernel: nouveau 0000:02:00.0: probe with driver nouveau failed with error -5
Not sure why, I went over the patch and thought it should have worked, but there must be some
32-bit problem maybe in the FMC boot path.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Change CONFIG_MMC_SPI from built-in to module in the
at91_dt_defconfig. This allows the MMC over SPI driver to
be loaded only when needed for WILC subsystem.
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Link: https://lore.kernel.org/r/20250923094552.430595-1-manikandan.m@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
All the infrastructure has already been plumbed to support this for
stacked devices, so just enable the request_queue limits features flag.
A note about chunk sectors for linear arrays:
While it is possible to set a chunk sectors param for building a linear
array, this is for specifying the granularity at which data sectors from
the device are used. It is not the same as a stripe size, like for RAID0.
As such, it is not appropriate to set chunk_sectors request queue limit to
the same value, as chunk_sectors request limit is a boundary for which
requests cannot straddle.
However, request_queue limit max_hw_sectors is set to chunk sectors, which
almost has the same effect as setting chunk_sectors limit.
Link: https://lore.kernel.org/linux-raid/20250903161052.3326176-1-john.g.garry@oracle.com
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Yu Kuai <yukuai3@fnnas.com>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
We attempted to use RCU to protect the pointer 'thread', but directly
passed the value when calling md_wakeup_thread(). This means that the
RCU pointer has been acquired before rcu_read_lock(), which renders
rcu_read_lock() ineffective and could lead to a use-after-free.
Link: https://lore.kernel.org/linux-raid/20251015083227.1079009-1-yun.zhou@windriver.com
Fixes: 4469315439 ("md: protect md_thread with rcu")
Signed-off-by: Yun Zhou <yun.zhou@windriver.com>
Reviewed-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai@fnnas.com>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
In sync del gendisk path, it deletes gendisk first and the directory
/sys/block/md is removed. Then it releases mddev kobj in a delayed work.
If we enable debug log in sysfs_remove_group, we can see the debug log
'sysfs group bitmap not found for kobject md'. It's the reason that the
parent kobj has been deleted, so it can't find parent directory.
In creating path, it allocs gendisk first, then adds mddev kobj. So it
should delete mddev kobj before deleting gendisk.
Before commit 9e59d60976 ("md: call del_gendisk in control path"), it
releases mddev kobj first. If the kobj hasn't been deleted, it does clean
job and deletes the kobj. Then it calls del_gendisk and releases gendisk
kobj. So it doesn't need to call kobject_del to delete mddev kobj. After
this patch, in sync del gendisk path, the sequence changes. So it needs
to call kobject_del to delete mddev kobj.
After this patch, the sequence is:
1. kobject del mddev kobj
2. del_gendisk deletes gendisk kobj
3. mddev_delayed_delete releases mddev kobj
4. md_kobj_release releases gendisk kobj
Link: https://lore.kernel.org/linux-raid/20250928012424.61370-1-xni@redhat.com
Fixes: 9e59d60976 ("md: call del_gendisk in control path")
Signed-off-by: Xiao Ni <xni@redhat.com>
Reviewed-by: Li Nan <linan122@huawei.com>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
In file included from ../sound/pci/au88x0/au8830.c:15:
In function ‘vortex_Eqlzr_SetAllBandsFromActiveCoeffSet’,
../sound/pci/au88x0/au88x0_eq.c:571:9: error: ‘vortex_EqHw_SetRightGainsTarget’ reading 2 bytes from a region of size 0 [-Werror=stringop-overread]
vortex_EqHw_SetRightGainsTarget(vortex, &(eq->this130[eq->this10]));
Modified the array access in vortex_Eqlzr_SetAllBandsFromActiveCoeffSet() to use pointer arithmetic instead of array indexing.
This resolves a compiler warning that incorrectly flagged a buffer overread when accessing the EQ gain array.
The this130 array has fixed size 20 and the index is safely within bounds, making the original code correct but confusing to static analysis.
Signed-off-by: wangdicheng <wangdicheng@kylinos.cn>
Link: https://patch.msgid.link/20251107024525.38454-1-wangdich9700@163.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Replace hardcoded GPIO node value with a defined constant for better
code readability and maintainability.
Signed-off-by: wangdicheng <wangdicheng@kylinos.cn>
Link: https://patch.msgid.link/20251107024030.36712-1-wangdich9700@163.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-11-06 (i40, ice, iavf)
Mohammad Heib introduces a new devlink parameter, max_mac_per_vf, for
controlling the maximum number of MAC address filters allowed by a VF. This
allows administrators to control the VF behavior in a more nuanced manner.
Aleksandr and Przemek add support for Receive Side Scaling of GTP to iAVF
for VFs running on E800 series ice hardware. This improves performance and
scalability for virtualized network functions in 5G and LTE deployments.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
iavf: add RSS support for GTP protocol via ethtool
ice: Extend PTYPE bitmap coverage for GTP encapsulated flows
ice: improve TCAM priority handling for RSS profiles
ice: implement GTP RSS context tracking and configuration
ice: add virtchnl definitions and static data for GTP RSS
ice: add flow parsing for GTP and new protocol field support
i40e: support generic devlink param "max_mac_per_vf"
devlink: Add new "max_mac_per_vf" generic device param
====================
Link: https://patch.msgid.link/20251106225321.1609605-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: stmmac: lpc18xx and sti: convert to set_phy_intf_sel()
This series converts lpc18xx and sti to use the new .set_phy_intf_sel()
method.
====================
Link: https://patch.msgid.link/aQyEs4DAZRWpAz32@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rather than placing the phy_intf_sel() setup in the ->init() method,
move it to the new ->set_phy_intf_sel() method.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vGy5o-0000000DhQn-34JE@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use stmmac_get_phy_intf_sel() to decode the PHY interface mode to the
phy_intf_sel value, validate the result and use that to set the
control register to select the operating mode for the DWMAC core.
Note that when an unsupported interface mode is used, the array would
decode this to PHY_INTF_SEL_GMII_MII, so preserve this behaviour.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vGy5j-0000000DhQh-2e0x@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the PHY_INTF_SEL_x values directly rather than the driver private
ETH_PHY_SEL_x values. Move the FIELD_PREP() into sti_dwmac_set_mode().
Use dwmac->interface directly.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vGy5e-0000000DhQb-2B7I@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the common dwmac definitions for the PHY interface selection field,
adding MII_PHY_SEL_VAL() temporarily to avoid line wrapping.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vGy5Z-0000000DhQV-1e2l@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the configuration of the dwmac PHY interface selection to the new
->set_phy_intf_sel() method.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vGy5U-0000000DhQP-19Hd@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Validate the phy_intf_sel value rather than the PHY interface mode.
This will allow us to transition to the ->set_phy_intf_sel() method.
Note that this will allow GMII as well as MII as the phy_intf_sel
value is the same for both.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vGy5P-0000000DhQJ-0Oi3@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use stmmac_get_phy_intf_sel() to decode the PHY interface mode to the
phy_intf_sel value, and use the result to program the ethernet mode.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vGy5J-0000000DhQD-46Ob@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the PHY_INTF_SEL_x values directly rather than the driver private
LPC18XX_CREG_CREG6_ETHMODE_x definitions, and convert
LPC18XX_CREG_CREG6_ETHMODE_MASK to use GENMASK().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vGy5E-0000000DhQ7-3cuy@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
net: use skb_attempt_defer_free() in napi_consume_skb()
There is a lack of NUMA awareness and more generally lack
of slab caches affinity on TX completion path.
Modern drivers are using napi_consume_skb(), hoping to cache sk_buff
in per-cpu caches so that they can be recycled in RX path.
Only use this if the skb was allocated on the same cpu,
otherwise use skb_attempt_defer_free() so that the skb
is freed on the original cpu.
This removes contention on SLUB spinlocks and data structures,
and this makes sure that recycled sk_buff have correct NUMA locality.
After this series, I get ~50% improvement for an UDP tx workload
on an AMD EPYC 9B45 (IDPF 200Gbit NIC with 32 TX queues).
I will later refactor skb_attempt_defer_free()
to no longer have to care of skb_shared() and skb_release_head_state().
====================
Link: https://patch.msgid.link/20251106202935.1776179-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
skb_defer_max value is very conservative, and can be increased
to avoid too many calls to kick_defer_list_purge().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20251106202935.1776179-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, only skb dst is cleared (thanks to skb_dst_drop())
Make sure skb->destructor, conntrack and extensions are cleared.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20251106202935.1776179-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The lan8814 is a quad-phy and it is using QSGMII towards the MAC.
The problem is that everytime when one of the ports is configured then
the PCS is reseted for all the PHYs. Meaning that the other ports can
loose traffic until the link is establish again.
To fix this, do the reset one time for the entire PHY package.
Fixes: ece1950283 ("net: phy: micrel: 1588 support for LAN8814 phy")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Divya Koppera <Divya.Koppera@microchip.com >
Link: https://patch.msgid.link/20251106090637.2030625-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
skb_defer_free_flush() is becoming more important these days.
Add a prefetch operation to reduce latency a bit on some
platforms like AMD EPYC 7B12.
On more recent cpus, a stall happens when reading skb_shinfo().
Avoiding it will require a more elaborate strategy.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/20251106085500.2438951-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
