If user set bridge interface as actual RDMA-capable NICs are lower devices,
ksmbd can not detect as RDMA capable. This patch can detect the RDMA
capable lower devices from bridge master or VLAN. With this change, ksmbd
can accept both TCP and RDMA connections through the same bridge IP
address, allowing mixed transport operation without requiring separate
interfaces.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
TAS5822 is in same family with TAS58XX.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251104041314.792-2-baojun.xu@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently Xe driver is triggering flr without any clean-up on
shutdown. This is causing random warnings from pending related works as the
underlying hardware is reset in the middle of their execution.
Fix this by performing clean shutdown also when using flr.
Fixes: 501d799a47 ("drm/xe: Wire up device shutdown handler")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Maarten Lankhorst <dev@lankhorst.se>
Link: https://patch.msgid.link/20251031122312.1836534-1-jouni.hogander@intel.com
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Use ARRAY_SIZE() instead of hard coded numbers to show the intention
and make code robust against potential changes.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20251103180946.604127-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since snd_soc_suspend() is invoked through snd_soc_pm_ops->suspend(),
and snd_soc_pm_ops is associated with the soc_driver (defined in
sound/soc/soc-core.c), and there is no parent-child relationship between
the soc_driver and the DA7213 codec driver, the power management subsystem
does not enforce a specific suspend/resume order between the DA7213 driver
and the soc_driver.
Because of this, the different codec component functionalities, called from
snd_soc_resume() to reconfigure various functions, can race with the
DA7213 struct dev_pm_ops::resume function, leading to misapplied
configuration. This occasionally results in clipped sound.
Fix this by dropping the struct dev_pm_ops::{suspend, resume} and use
instead struct snd_soc_component_driver::{suspend, resume}. This ensures
the proper configuration sequence is handled by the ASoC subsystem.
Cc: stable@vger.kernel.org
Fixes: 431e040065 ("ASoC: da7213: Add suspend to RAM support")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20251104114914.2060603-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Joy Zou <joy.zou@nxp.com>:
For the details, please check the patch commit log.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
---
Joy Zou (3):
regulator: pf9453: change the device ID register address
regulator: pf9453: remove low power mode
regulator: pf9453: remove unused I2C_LT register
drivers/regulator/pf9453-regulator.c | 22 +---------------------
1 file changed, 1 insertion(+), 21 deletions(-)
---
base-commit: 98bd8b16ae57e8f25c95d496fcde3dfdd8223d41
change-id: 20251103-b4-next-pf9453-c9f8fb6e0c10
Best regards,
--
Joy Zou <joy.zou@nxp.com>
Add read_poll_timeout_atomic function which polls periodically until a
condition is met, an error occurs, or the attempt limit is reached.
The C's read_poll_timeout_atomic() is used for the similar purpose.
In atomic context the timekeeping infrastructure is unavailable, so
reliable time-based timeouts cannot be implemented. So instead, the
helper accepts a maximum number of attempts and busy-waits (udelay +
cpu_relax) between tries.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Link: https://patch.msgid.link/20251103112958.2961517-3-fujita.tomonori@gmail.com
[ Adjust imports to use "kernel vertical" style. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Add a mechanism for DisplayID specific quirks, and add the first quirk
to ignore DisplayID section checksum errors.
It would be quite inconvenient to pass existing EDID quirks from
drm_edid.c for DisplayID parsing. Not all places doing DisplayID
iteration have the quirks readily available, and would have to pass it
in all places. Simply add a separate array of DisplayID specific EDID
quirks. We do end up checking it every time we iterate DisplayID blocks,
but hopefully the number of quirks remains small.
There are a few laptop models with DisplayID checksum failures, leading
to higher refresh rates only present in the DisplayID blocks being
ignored. Add a quirk for the panel in the machines.
Reported-by: Tiago Martins Araújo <tiago.martins.araujo@gmail.com>
Closes: https://lore.kernel.org/r/CACRbrPGvLP5LANXuFi6z0S7XMbAG4X5y2YOLBDxfOVtfGGqiKQ@mail.gmail.com
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14703
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Tiago Martins Araújo <tiago.martins.araujo@gmail.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/c04d81ae648c5f21b3f5b7953f924718051f2798.1761681968.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
It's more convenient to pass iter than a handful of its members to
drm_find_displayid_extension(), especially as we're about to add another
member.
Rename the function find_next_displayid_extension() while at it, to be
more descriptive.
Cc: Tiago Martins Araújo <tiago.martins.araujo@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Tiago Martins Araújo <tiago.martins.araujo@gmail.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/3837ae7f095e77a082ac2422ce2fac96c4f9373d.1761681968.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Function profiler shows the hit count of each function using its symbol
name. However, there are some same-name local symbols, which we can not
distinguish.
To solve this issue, this introduces an option to show the symbols
in "_text+OFFSET" format. This can avoid exposing the random shift of
KASLR. The functions in modules are shown as "MODNAME+OFFSET" where the
offset is from ".text".
E.g. for the kernel text symbols, specify vmlinux and the output to
addr2line, you can find the actual function and source info;
$ addr2line -fie vmlinux _text+3078208
__balance_callbacks
kernel/sched/core.c:5064
for modules, specify the module file and .text+OFFSET;
$ addr2line -fie samples/trace_events/trace-events-sample.ko .text+8224
do_simple_thread_func
samples/trace_events/trace-events-sample.c:23
Link: https://lore.kernel.org/all/176187878064.994619.8878296550240416558.stgit@devnote2/
Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Since enum trace_iterator_flags is 32bit, the max number of the
option flags is limited to 32 and it is fully used now. To add
a new option, we need to expand it.
So replace the TRACE_ITER_##flag with TRACE_ITER(flag) macro which
is 64bit bitmask.
Link: https://lore.kernel.org/all/176187877103.994619.166076000668757232.stgit@devnote2/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
hyperv_drm_drv.c and hyperv_drm_modeset.c depend on drm_print.h being
indirectly included via drm_buddy.h, drm_mm.h, or
ttm/ttm_resource.h. Include drm_print.h explicitly.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/r/20251104101158.1cc9abcd@canb.auug.org.au
Fixes: f6e8dc9edf ("drm: include drm_print.h where needed")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20251104100253.646577-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
syzbot reported a uninit-value in pctv452e_i2c_msg. [1]
When the snd_len or rcv_len check fails and jumps to failed, buf is
uninitialized, triggering the uninit-value issue.
Move the snd/rcv length check before kmalloc, and return -EINVAL directly
if the condition is met.
[1]
BUG: KMSAN: uninit-value in hex_string+0x681/0x740 lib/vsprintf.c:1220
pctv452e_i2c_msg+0x82a/0x8f0 drivers/media/usb/dvb-usb/pctv452e.c:467
pctv452e_i2c_xfer+0x2e6/0x4c0 drivers/media/usb/dvb-usb/pctv452e.c:502
Reported-by: syzbot+480edd2cadb85ddb4bbe@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=480edd2cadb85ddb4bbe
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Expose key Type-C port data in i915_display_info to make it easier to
understand the port configuration and active mode, especially whether
the link is in DP-Alt or TBT-Alt, without having to scan kernel logs.
Tested in DP-Alt, TBT-Alt, SST, and MST.
Expected output:
[CONNECTOR:290:DP-2]: status: connected
TC Port: E/TC#2 mode: tbt-alt pin assignment: - max lanes: 4
physical dimensions: 600x340mm
...
[CONNECTOR:263:DP-5]: status: connected
TC Port: G/TC#4 mode: dp-alt pin assignment: C max lanes: 4
physical dimensions: 610x350mm
v2: Use drm_printer (Ville)
Lock/Unlock around the printf (Imre)
v3: Forward Declaration drm_printer struct (Jani)
v4: Handle MST connector with no active encoder (Imre)
Add a delimiter between fields and ":" after the port name (Imre)
v5: Init dig_port and use it in intel_encorder_is_tc and tc_info (Imre)
Move tc->port_name to a newline (Imre)
v6: Use intel_tc_port_lock/Unlock (Imre)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251028190753.3089937-1-khaled.almahallawy@intel.com
Add udelay() function, inserts a delay based on microseconds with busy
waiting, in preparation for supporting read_poll_timeout_atomic().
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Acked-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://patch.msgid.link/20251103112958.2961517-2-fujita.tomonori@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Christian Brauner <brauner@kernel.org> says:
This converts all users of override_creds() to rely on credentials
guards. Leave all those that do the prepare_creds() + modify creds +
override_creds() dance alone for now. Some of them qualify for their own
variant.
* patches from https://patch.msgid.link/20251103-work-creds-guards-simple-v1-0-a3e156839e7f@kernel.org:
net/dns_resolver: use credential guards in dns_query()
cgroup: use credential guards in cgroup_attach_permissions()
act: use credential guards in acct_write_process()
smb: use credential guards in cifs_get_spnego_key()
nfs: use credential guards in nfs_idmap_get_key()
nfs: use credential guards in nfs_local_call_write()
nfs: use credential guards in nfs_local_call_read()
erofs: use credential guards
binfmt_misc: use credential guards
backing-file: use credential guards for mmap
backing-file: use credential guards for splice write
backing-file: use credential guards for splice read
backing-file: use credential guards for writes
backing-file: use credential guards for reads
aio: use credential guards
cred: add {scoped_}with_creds() guards
Link: https://patch.msgid.link/20251103-work-creds-guards-simple-v1-0-a3e156839e7f@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Christian Brauner <brauner@kernel.org> says:
A few months ago I did work to make override_creds()/revert_creds()
completely reference count free - mostly for the sake of
overlayfs but it has been beneficial to everyone using this.
In a recent pull request from Jens that introduced another round of
override_creds()/revert_creds() for nbd Linus asked whether we could
avoide the prepare_kernel_creds() calls that duplicate the kernel
credentials and then drop them again later.
Yes, we can actually. We can use the guard infrastructure to completely
avoid the allocation and then also to never expose the temporary
variable to hold the kernel credentials anywhere in the callers.
So add with_kernel_creds() and scoped_with_kernel_creds() for this
purpose. Also take the opportunity to fixup the scoped_class() macro I
introduced two cycles ago.
* patches from https://patch.msgid.link/20251103-work-creds-init_cred-v1-0-cb3ec8711a6a@kernel.org:
unix: don't copy creds
target: don't copy kernel creds
nbd: don't copy kernel creds
firmware: don't copy kernel creds
cred: add {scoped_}with_kernel_creds
cred: make init_cred static
cred: add kernel_cred() helper
cleanup: fix scoped_class()
Link: https://patch.msgid.link/20251103-work-creds-init_cred-v1-0-cb3ec8711a6a@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add a new cleanup class for override creds. We can make use of this in a
bunch of places going forward.
Based on this scoped_with_kernel_creds() that can be used to temporarily
assume kernel credentials for specific tasks such as firmware loading,
or coredump socket connections. At no point will the caller interact
with the kernel credentials directly.
Link: https://patch.msgid.link/20251103-work-creds-init_cred-v1-4-cb3ec8711a6a@kernel.org
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
This is a class, not a guard so why on earth is it checking for guard
pointers or conditional lock acquisition? None of it makes any sense at
all.
I'm not sure what happened back then. Maybe I had a brief psychedelic
period that I completely forgot about and spaced out into a zone where
that initial macro implementation made any sense at all.
Link: https://patch.msgid.link/20251103-work-creds-init_cred-v1-1-cb3ec8711a6a@kernel.org
Fixes: 5c21c5f22d ("cleanup: add a scoped version of CLASS()")
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Guenter Roeck reported this kernel crash on his emulated B160L machine:
Starting network: udhcpc: started, v1.36.1
Backtrace:
[<104320d4>] unwind_once+0x1c/0x5c
[<10434a00>] walk_stackframe.isra.0+0x74/0xb8
[<10434a6c>] arch_stack_walk+0x28/0x38
[<104e5efc>] stack_trace_save+0x48/0x5c
[<105d1bdc>] set_track_prepare+0x44/0x6c
[<105d9c80>] ___slab_alloc+0xfc4/0x1024
[<105d9d38>] __slab_alloc.isra.0+0x58/0x90
[<105dc80c>] kmem_cache_alloc_noprof+0x2ac/0x4a0
[<105b8e54>] __anon_vma_prepare+0x60/0x280
[<105a823c>] __vmf_anon_prepare+0x68/0x94
[<105a8b34>] do_wp_page+0x8cc/0xf10
[<105aad88>] handle_mm_fault+0x6c0/0xf08
[<10425568>] do_page_fault+0x110/0x440
[<10427938>] handle_interruption+0x184/0x748
[<11178398>] schedule+0x4c/0x190
BUG: spinlock recursion on CPU#0, ifconfig/2420
lock: terminate_lock.2+0x0/0x1c, .magic: dead4ead, .owner: ifconfig/2420, .owner_cpu: 0
While creating the stack trace, the unwinder uses the stack pointer to guess
the previous frame to read the previous stack pointer from memory. The crash
happens, because the unwinder tries to read from unaligned memory and as such
triggers the unalignment trap handler which then leads to the spinlock
recursion and finally to a deadlock.
Fix it by checking the alignment before accessing the memory.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable@vger.kernel.org # v6.12+
VKMS is no longer in the platform bus, instead, it is in the faux bus.
In addition, when present, IGT picks hardware drivers instead of virtual
drivers, like VKMS or vgem, if they are not forced.
Update the documentation to use IGT_FORCE_DRIVER instead of IGT_DEVICE.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://lore.kernel.org/r/20251024110014.4614-2-jose.exposito89@gmail.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
