eCryptfs uses MD5 for a couple unusual purposes: to "mix" the key into
the IVs for file contents encryption (similar to ESSIV), and to prepend
some key-dependent bytes to the plaintext when encrypting filenames
(which is useless since eCryptfs encrypts the filenames with ECB).
Currently, eCryptfs computes these MD5 hashes using the crypto_shash
API. Update it to instead use the MD5 library API. This is simpler and
faster: the library doesn't require memory allocations, can't fail, and
provides direct access to MD5 without overhead such as indirect calls.
To preserve the existing behavior of eCryptfs support being disabled
when the kernel is booted with "fips=1", make ecryptfs_get_tree() check
fips_enabled itself. Previously it relied on crypto_alloc_shash("md5")
failing. I don't know for sure that this is actually needed; e.g., it
could be argued that eCryptfs's use of MD5 isn't for a security purpose
as far as FIPS is concerned. But this preserves the existing behavior.
Tested by verifying that an existing eCryptfs can still be mounted with
a kernel that has this commit, with all the files matching. Also tested
creating a filesystem with this commit and mounting+reading it without.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20251011200010.193140-1-ebiggers@kernel.org
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
iomap_dio_zero() uses a custom allocated memory of zeroes for padding
zeroes. This was a temporary solution until there was a way to request a
zero folio that was greater than the PAGE_SIZE.
Use largest_zero_folio() function instead of using the custom allocated
memory of zeroes. There is no guarantee from largest_zero_folio()
function that it will always return a PMD sized folio. Adapt the code so
that it can also work if largest_zero_folio() returns a ZERO_PAGE.
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Replace simple_strtol() with the recommended kstrtoint() for parsing the
'ramdisk_start=' boot parameter. Unlike simple_strtol(), which returns a
a long, kstrtoint() converts the string directly to an integer and
avoids implicit casting.
Check the return value of kstrtoint() and reject invalid values. This
adds error handling while preserving existing behavior for valid values,
and removes use of the deprecated simple_strtol() helper.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The JC_SUBCMD_RATE_MAX_ATTEMPTS constant is currently set to 500.
In a worst-case scenario where all attempts consistently fail, this could
cause the loop to block for up to 60000 ms (500 * 60ms * 2, including the
additional retry after a timeout).
This change lowers the maximum potential blocking time to 3000 ms
(25 * 60ms * 2), improving system responsiveness and efficiency.
Signed-off-by: Willy Huang <willyhuang@google.com>
Reviewed-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
USB Elan devices have the same problem as the I2C ones with a fake
battery device showing up.
Reviewed-by: Hans de Goede <hansg@kernel.org>
Reported-by: André Barata <andretiagob@protonmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220722
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Multiple consecutive boolean function arguments are usually not very
readable.
Replace the ones in ttm_pool_init() with flags with the additional
benefit of soon being able to pass in more data with just this one
code base churning cost.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20251020115411.36818-3-tvrtko.ursulin@igalia.com
Use a scope-based cleanup helper for the buffer allocated with kmalloc()
in ntrig_report_version() to simplify the cleanup logic and prevent
memory leaks (specifically the !hid_is_usb()-case one).
[jkosina@suse.com: elaborate on the actual existing leak]
Fixes: 185c926283 ("HID: hid-ntrig: fix unable to handle page fault in ntrig_report_version()")
Signed-off-by: Masami Ichikawa <masami256@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
No functional change but to allow easier refactoring in the future.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20251020115411.36818-2-tvrtko.ursulin@igalia.com
The ttm/ttm_resource.h header does not really need anything from
drm_print.h. A simple forward declaration for struct drm_printer is
sufficient.
An explicit drm_print.h include has previously been added to all the
files that indirectly depended on this include.
v3: Only remove the include here (Thomas)
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/cfdb1095033112c2a7e58767481c98929984a33c.1761734313.git.jani.nikula@intel.com
The drm_mm.h header does not really need anything from drm_print.h. A
simple forward declaration for struct drm_printer is sufficient.
An explicit drm_print.h include has previously been added to all the
files that indirectly depended on this include.
v3: Only remove the include here (Thomas)
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/7d570ed1f0f0f14cac346bea50bce9ef02ddd166.1761734313.git.jani.nikula@intel.com
The drm_buddy.h header does not really need anything from drm_print.h. A
simple forward declaration for struct drm_printer is sufficient.
An explicit drm_print.h include has previously been added to all the
files that indirectly depended on this include.
v3: Only remove the include here (Thomas)
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/b303996b407fcbe2c7357bea036f79c45d6dae49.1761734313.git.jani.nikula@intel.com
There are a gazillion files that depend on drm_print.h being indirectly
included via drm_buddy.h, drm_mm.h, or ttm/ttm_resource.h. In
preparation for removing those includes, explicitly include drm_print.h
where needed.
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/5fe67395907be33eb5199ea6d540e29fddee71c8.1761734313.git.jani.nikula@intel.com
They are all doing the same thing with the mask being the param. Just
declare our own attribute to store the mask and provide a single
function.
Another common pattern is to define the show function in the macro,
however on follow up work the mask may be used for returning more
information, so it'd need to be stored in any case.
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://patch.msgid.link/20251029-gt-throttle-cri-v3-7-d1f5abbb8114@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Add xe_gt_throttle under the "GT Frequency Management" and improve the
narrative making sure the documentation for both *_freq and throttle/*
attributes follow the same style.
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://patch.msgid.link/20251029-gt-throttle-cri-v3-6-d1f5abbb8114@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Move the attribute definitions to be grouped together rather than near
the show() function: checkpatch keeps complaining about the missing
newline when defining new attributes and it reads better to group
everything, which should match e.g. the xe_pmu.c style.
While grouping them, also define a THROTTLE_ATTR_RO(), similar to
DEVICE_ATTR_RO(), and use it to define all attributes. This makes it
shorter and with a familiar syntax.
Finally, during the cri_throttle_attrs[] array definition, also
highlight what's coming from common attributes and what is CRI-specific.
These 3 things could be done as separate commits, but they are all about
the same thing: reduce the attribute definition verbosity and are very
simple and mechanical.
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://patch.msgid.link/20251029-gt-throttle-cri-v3-5-d1f5abbb8114@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reduce boilerplate code by adding a helper to go directly from the
throttle kobject to the gt. Note that there's already a kobj_to_gt(),
but that actually converts our kobj_gt object to gt.
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://patch.msgid.link/20251029-gt-throttle-cri-v3-4-d1f5abbb8114@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Use a single function to read and mask the value the callers will be
interested in. This reduces the risk of a caller using a plain call to
xe_gt_throttle_get_limit_reasons() without applying any mask, which can
return unexpected bits for future platforms.
Select which reg and mask it's going to be used according to the
platform and gt type and always use that one function.
There was an odd xe_gt_dbg() when reading the status, which is not done
for any other throttle/* sysfs file, so just make the status be as
special as everybody else.
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://patch.msgid.link/20251029-gt-throttle-cri-v3-3-d1f5abbb8114@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
There's no need to be so verbose with two functions per bit:
read_reason_xxxxx() and reason_xxxxx_show(). Drop the former and just
use a new is_throttled_by() that receives the mask as parameter.
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://patch.msgid.link/20251029-gt-throttle-cri-v3-2-d1f5abbb8114@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Crescent Island has some additional and different bits for performance
limit reasons. Add the new definitions and use them for CRI.
Signed-off-by: Sk Anirban <sk.anirban@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://patch.msgid.link/20251029-gt-throttle-cri-v3-1-d1f5abbb8114@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
This reverts commit d3e7609c6e5ec92587ed1043a985749d22cc78d1.
The commit cause a warning:
Documentation/networking/skbuff.rst:34: WARNING: duplicate label crc, other instance in Documentation/translations/zh_CN/networking/skbuff.rst
And there's no simple way to keep the meaningful doc context and avoid the
warning, so, let's remove the doc.
Signed-off-by: Alex Shi <alexs@kernel.org>
Fixes build warning in cachestat found during clang build and adds
tmpshmcstat to .gitignore.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmkDy4wACgkQCwJExA0N
Qxz/zw//XkD/6mI0KHL88ko6i9GGcbN7QI0RAZpJFHmKTCRkZ59eXrA1h0eeZGwB
KOt9JzhGkeYHeFYVXV6ghzlV8zXig5romxyBZ7f3WTtPDIFobNJQqnV8ZcOMe95A
PtdxNtR1tXK7VYP6MlUETCcKEjO1USrbaHMBHSPpDhoO+uysiW2XptqVjVMWbaCZ
9yydd4bCsIKSWHc4O2AaOOdA45A1ta+DZFGwvvq4Y0RrRUrLYsvgN/EcC5KGd9yO
2wqbQ9pmNdqZgrVWXYGNjGoNAlDsyc0vBSDBEYzvEUvcASQw9MG62xXHF6C23TMM
szNg4QR0xwWXB3EHceHJYUqmiPLWsfjk1az2mkkMKE0f+84JWdKWGCTb2hyU+vjl
dzUGDRLKuRcrfmAcgGxa1ARuJFElo4H4iAf76/dXVCS7rOciPx2Xc2J2yP2y7wsb
rh17+k5fmpeOIrAHju4tiSOejDG9bxr27wj/VsL3qUxOcxh20tAk/0D6ojtuyzWF
Zg247AQT+X/7C4lKwwKMZKdOTqZN5iIEOb4T1vm3dC8rY6KI2hzwyt3TlDyN7rsS
q84/zP7h3z95LhgQ5WCb3Z7x3vo0gkIirpooD81XVN9X6nQJg73TpcNkzrGcnY9K
rKALuPtPeaX9b6Bc2tuns10HWMtBCQLI+8sSayMSoz/IFqN1HAU=
=XQbQ
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-fixes-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"Fix build warning in cachestat found during clang build and add
tmpshmcstat to .gitignore"
* tag 'linux_kselftest-fixes-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: cachestat: Fix warning on declaration under label
selftests/cachestat: add tmpshmcstat file to .gitignore
Fixes log overwrite in param_tests and fixes incorrect cast of priv
pointer in test_dev_action(). Updates email address for Rae Moar in
MAINTAINERS KUnit entry.
-----BEGIN PGP SIGNATURE-----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=stUG
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-kunit-fixes-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit fixes from Shuah Khan:
"Fix log overwrite in param_tests and fixes incorrect cast of priv
pointer in test_dev_action().
Update email address for Rae Moar in MAINTAINERS KUnit entry"
* tag 'linux_kselftest-kunit-fixes-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
MAINTAINERS: Update KUnit email address for Rae Moar
kunit: prevent log overwrite in param_tests
kunit: test_dev_action: Correctly cast 'priv' pointer to long*
This patch adds support for matching fragmented packets in tc flower
filters.
Previously, commit 93a8540aac ("cxgb4: flower: validate control flags")
added a check using flow_rule_match_has_control_flags() to reject
any rules with control flags, as the driver did not support
fragmentation at that time.
Now, with this patch, support for FLOW_DIS_IS_FRAGMENT is added:
- The driver checks for control flags using
flow_rule_is_supp_control_flags(), as recommended in
commit d11e631194 ("flow_offload: add control flag checking helpers").
- If the fragmentation flag is present, the driver sets `fs->val.frag` and
`fs->mask.frag` accordingly in the filter specification.
Since fragmentation is now supported, the earlier check that rejected all
control flags (flow_rule_match_has_control_flags()) has been removed.
Signed-off-by: Harshita V Rajput <harshitha.vr@chelsio.com>
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251028075255.1391596-1-harshitha.vr@chelsio.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Call input_free_device() on failing input device registration as
necessary (and mentioned in the input subsystem documentation) in the
ACPI button driver (Kaushlendra Kumar)
- Fix use-after-free in acpi_video_switch_brightness() by canceling
a delayed work during tear-down (Yuhao Jiang)
- Use platform device for devres-related actions in the ACPI fan driver
to allow device-managed resources to be cleaned up properly (Armin
Wolf)
- Add version checks to the MRRM and SPCR table paresers (Tony Luck and
Punit Agrawal)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmkDwd8SHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1bjwH/0BEpsMWA8hT9HVD3pZPujlhc9vkxh99
pFedo3knVhX0UJTsa2zUTLPwyrfybJixj7KrSEPhUaiLe0Tlq/incabGtdI0GsVX
591xmH9PN2xo0oPIlqRcB7uDRD1NEv7dqS4GpdVcRyX9AGHaSdjosl5sX4AYIdTZ
Qoz4thmuRsWPZ7LNrGw+VUBvOazHybr2yaHzzDad2RfZ1bjJoSSe+GsYQ5r/c60i
FGFhjfGxQRbjcigSsgm7Aw0in8qSlHlipFGhjmcmUSjac5GgnUxd5e0TrRZas2PN
ZNSBjvxUmxFyGrlEnifR8+3QnqfeGVpQ9BEw/ITNXYd66wuRFKBGEUA=
=uRk3
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix three ACPI driver issues and add version checks to two ACPI
table parsers:
- Call input_free_device() on failing input device registration as
necessary (and mentioned in the input subsystem documentation) in
the ACPI button driver (Kaushlendra Kumar)
- Fix use-after-free in acpi_video_switch_brightness() by canceling a
delayed work during tear-down (Yuhao Jiang)
- Use platform device for devres-related actions in the ACPI fan
driver to allow device-managed resources to be cleaned up properly
(Armin Wolf)
- Add version checks to the MRRM and SPCR table parsers (Tony Luck
and Punit Agrawal)"
* tag 'acpi-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: SPCR: Check for table version when using precise baudrate
ACPI: MRRM: Check revision of MRRM table
ACPI: fan: Use platform device for devres-related actions
ACPI: fan: Use ACPI handle when retrieving _FST
ACPI: video: Fix use-after-free in acpi_video_switch_brightness()
ACPI: button: Call input_free_device() on failing input device registration
- Add an exit latency check to the menu cpuidle governor in the case
when it considers using a real idle state instead of a polling one to
address a performance regression (Rafael Wysocki)
- Revert an attempted cleanup of a system suspend code path that
introduced a regression elsewhere (Samuel Wu)
- Allow pm_restrict_gfp_mask() to be called multiple times in a row
and adjust pm_restore_gfp_mask() accordingly to avoid having to play
nasty games with these calls during hibernation (Rafael Wysocki)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmkDvsQSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1ICQH/1haZ2p7muRXiyP/rmyt41wQm/VZPMFV
JBguNH0nd9r9szVntE0ic+lfv/nT5q0C26/tDHCnDPrtqT4aEj8uQgecfb71r1Sn
4cp4Y3BDp/9v6K2AAdo/FBYBMG63qlKlMaSXG2hewH3MreaP1V86AmELhGz6jvSV
hFzJCi/bPoS7ot2mmKCE3MSGU9XEI1Hce4YAGfI3j/6RK9UD921g9gZWuEgqsQbB
QHM3Wqp348sPW0JgDNYtFv6X6N3+JmSyO0oYLSSTbYKVNVkd7o/3zxEx5pnnLDjD
l7y9pUbJ155fBkCbLIrU0NUwCo4PZfMs6KS3L/0Cu3Dp4JPa1F/BsN4=
=p+g/
-----END PGP SIGNATURE-----
Merge tag 'pm-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix three regressions, two recent ones and one introduced during
the 6.17 development cycle:
- Add an exit latency check to the menu cpuidle governor in the case
when it considers using a real idle state instead of a polling one
to address a performance regression (Rafael Wysocki)
- Revert an attempted cleanup of a system suspend code path that
introduced a regression elsewhere (Samuel Wu)
- Allow pm_restrict_gfp_mask() to be called multiple times in a row
and adjust pm_restore_gfp_mask() accordingly to avoid having to
play nasty games with these calls during hibernation (Rafael
Wysocki)"
* tag 'pm-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: Allow pm_restrict_gfp_mask() stacking
cpuidle: governors: menu: Select polling state in some more cases
Revert "PM: sleep: Make pm_wakeup_clear() call more clear"
The Chromebook Pixel 2013 (Link)'s ec does not support the lightbar manual
suspend commands. As a result, attempting to suspend the device fails and
prints the following error:
cros-ec-lightbar cros-ec-lightbar.3.auto: PM: dpm_run_callback(): platform_pm_suspend returns -22
cros-ec-lightbar cros-ec-lightbar.3.auto: PM: failed to suspend: error -22
PM: Some devices failed to suspend, or early wake event detected
Check the return value of lb_manual_suspend_ctrl in cros_ec_lightbar_probe
and disable manual suspend control if -EINVAL is returned.
Signed-off-by: Brady Norander <bradynorander@gmail.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20251030195910.8625-2-bradynorander@gmail.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
This is a follow up to commit c4781dc3d1 ("Kbuild: enable
-fms-extensions") but in a separate change due to being substantially
different from the initial submission.
There are many places within the kernel that use their own CFLAGS
instead of the main KBUILD_CFLAGS, meaning code written with the main
kernel's use of '-fms-extensions' in mind that may be tangentially
included in these areas will result in "error: declaration does not
declare anything" messages from the compiler.
Add '-fms-extensions' to all these areas to ensure consistency, along
with -Wno-microsoft-anon-tag to silence clang's warning about use of the
extension that the kernel cares about using. parisc does not build with
clang so it does not need this warning flag. LoongArch does not need it
either because -W flags from KBUILD_FLAGS are pulled into cflags-vdso.
Reported-by: Christian Brauner <brauner@kernel.org>
Closes: https://lore.kernel.org/20251030-meerjungfrau-getrocknet-7b46eacc215d@brauner/
Reviewed-by: Christian Brauner <brauner@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
This enables QoS configuration for QNOC type device which can be found
on SA8775P platform. It enables QoS configuration for master ports with
predefined priority and urgency forwarding. This helps in prioritizing
the traffic originating from different interconnect masters at NOC.
The system may function normally without this feature. However, enabling
QoS helps optimize latency and bandwidth across subsystems like CPU, GPU,
and multimedia engines, which becomes important in high-throughput
scenarios. This is a feature aimed at performance enhancement to improve
system performance under concurrent workloads.
* icc-sa8775p
dt-bindings: interconnect: add reg and clocks properties to enable QoS on sa8775p
interconnect: qcom: sa8775p: enable QoS configuration
Link: https://lore.kernel.org/r/20251001073344.6599-1-odelu.kukatla@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Drop the QPIC interconnect and BCM nodes for the SDX75 SoC. The reason
is that this QPIC BCM resource is already defined as a RPMh clock in
clk-rpmh driver as like other SDX SoCs. So it is wrong to describe the
same resource in two different providers.
Also, without this series, the NAND driver fails to probe on SDX75 as
the interconnect sync state disables the QPIC nodes as there were no
clients voting for this ICC resource. However, the NAND driver had already
voted for this BCM resource through the clk-rpmh driver. Since both votes
come from Linux, RPMh was unable to distinguish between these two and ends
up disabling the resource during sync state.
* icc-sdx75
interconnect: qcom: sdx75: Drop QPIC interconnect and BCM nodes
dt-bindings: interconnect: qcom: Drop QPIC_CORE IDs
Link: https://lore.kernel.org/r/20250926-sdx75-icc-v2-0-20d6820e455c@oss.qualcomm.com>
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The lack of the interconnects for the USB2 host might result in the
register writes for the PHY not reaching the PHY and thus the PLL not
locking up, resulting in -EBUSY errors for the USB host on the platform.
Add missing interconnect link and add interconnect paths to the USB2
device.
* icc-msm8996
interconnect: qcom: msm8996: add missing link to SLAVE_USB_HS
arm64: dts: qcom: msm8996: add interconnect paths to USB2 controller
Link: https://lore.kernel.org/r/20251002-fix-msm8996-icc-v1-0-a36a05d1f869@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
-----BEGIN PGP SIGNATURE-----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=woNE
-----END PGP SIGNATURE-----
Merge tag 'nf-next-25-10-30' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Florian Westphal says:
====================
netfilter: updates for net-next
1) Convert nf_tables 'nft_set_iter' usage to use C99 struct
initialization, from Fernando Fernandez Mancera.
2) Disallow nf_conntrack_max=0. This was an (undocumented)
historic inheritance from ip_conntrack (ipv4 only nf_conntrack
predecessor). Doing so will simplify future changes to make
this pernet-tuneable.
3) Fix a typo in conntrack.h comment, from Weibiao Tu.
* tag 'nf-next-25-10-30' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: fix typo in nf_conntrack_l4proto.h comment
netfilter: conntrack: disable 0 value for conntrack_max setting
netfilter: nf_tables: use C99 struct initializer for nft_set_iter
====================
Link: https://patch.msgid.link/20251030121954.29175-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The icc_commit_set() function, used by the debugfs interface, checks
the validity of the global cur_path pointer using IS_ERR_OR_NULL().
However, in the specific case where cur_path is NULL, while
IS_ERR_OR_NULL(NULL) correctly evaluates to true, the subsequent call
to PTR_ERR(NULL) returns 0.
This causes the function to return a success code (0) instead of an
error, misleading the user into believing their bandwidth request was
successfully committed when, in fact, no operation was performed.
Fix this by adding an explicit check to return -EINVAL if cur_path is
NULL. This prevents silent failures and ensures that an invalid
operational sequence is immediately and clearly reported as an error.
Fixes: 770c69f037 ("interconnect: Add debugfs test client")
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Link: https://lore.kernel.org/r/20251010151447.2289779-1-visitorckw@gmail.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
As like other SDX targets, SDX75 QPIC BCM resource is also modeled as a
RPMh clock in clk-rpmh driver. However, for SDX75, this resource was also
described as an interconnect node mistakenly.
Hence, drop the QPIC interconnect IDs and let the clients use clk-rpmh
driver to vote for this resource.
Even though this change is an ABI break, it is necessary to avoid
describing the same resource provider in two different drivers, as it may
lead to votes from clients overriding each other.
Fixes: 956329ec7c ("dt-bindings: interconnect: Add compatibles for SDX75")
Signed-off-by: Raviteja Laggyshetty <quic_rlaggysh@quicinc.com>
[mani: kept the QUP defines value unchanged]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250926-sdx75-icc-v2-2-20d6820e455c@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
As like other SDX SoCs, SDX75 SoC's QPIC BCM resource was modeled as a
RPMh clock in clk-rpmh driver. However, for SDX75, this resource was also
described as an interconnect and BCM node mistakenly. It is incorrect to
describe the same resource in two different providers, as it will lead to
votes from clients overriding each other.
Hence, drop the QPIC interconnect and BCM nodes and let the clients use
clk-rpmh driver to vote for this resource.
Without this change, the NAND driver fails to probe on SDX75, as the
interconnect sync state disables the QPIC nodes as there were no clients
voting for this ICC resource. However, the NAND driver had already voted
for this BCM resource through the clk-rpmh driver. Since both votes come
from Linux, RPMh was unable to distinguish between these two and ends up
disabling the QPIC resource during sync state.
Cc: stable@vger.kernel.org
Fixes: 3642b4e5cb ("interconnect: qcom: Add SDX75 interconnect provider driver")
Signed-off-by: Raviteja Laggyshetty <quic_rlaggysh@quicinc.com>
[mani: dropped the reference to bcm_qp0, reworded description]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Lakshmi Sowjanya D <quic_laksd@quicinc.com> # on SDX75
Link: https://lore.kernel.org/r/20250926-sdx75-icc-v2-1-20d6820e455c@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
When a command times out, mark it as ERT_CMD_STATE_TIMEOUT. Any other
commands that are canceled due to this timeout should be marked as
ERT_CMD_STATE_ABORT.
Fixes: aac243092b ("accel/amdxdna: Add command execution")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251029193423.2430463-1-lizhi.hou@amd.com
Add 'reg' and 'clocks' properties to enable QoS configuration. These
properties enable access to QoS registers and necessary clocks for
configuration.
QoS configuration is essential for ensuring that latency sensitive
components such as CPUs and multimedia engines receive prioritized
access to memory and interconnect resources. This helps to manage
bandwidth and latency across subsystems, improving system responsiveness
and performance in concurrent workloads.
Both 'reg' and 'clocks' properties are optional. If either is missing,
QoS configuration will be skipped. This behavior is controlled by the
'qos_requires_clocks' flag in the driver, which ensures that QoS
configuration is bypassed when required clocks are not defined.
Signed-off-by: Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20251001073344.6599-2-odelu.kukatla@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
We are trying to move away from netdevsim-only tests and towards
tests which can be run both against netdevsim and real drivers.
Replace the simple bash script we have for checking ethtool -g/-G
on netdevsim with a Python test tweaking those params as well
as channel count.
The new test is not exactly equivalent to the netdevsim one,
but real drivers don't often support random ring sizes,
let alone modifying max values via debugfs.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251029164930.2923448-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-10-29 (ice, i40e, idpf, ixgbe, igbvf)
For ice:
Michal converts driver to utilize Page Pool and libeth APIs. Conversion
is based on similar changes done for iavf in order to simplify buffer
management, improve maintainability, and increase code reuse across
Intel Ethernet drivers.
Additional details:
https://lore.kernel.org/20250925092253.1306476-1-michal.kubiak@intel.com
Alexander adds support for header split, configurable via ethtool.
Grzegorz allows for use of 100Mbps on E825C SGMII devices.
For i40e:
Jay Vosburgh avoids sending link state changes to VF if it is already in
the requested state.
For idpf:
Sreedevi removes duplicated defines.
For ixgbe:
Alok Tiwari fixes some typos.
For igbvf:
Alok Tiwari fixes output of VLAN warning message.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
igbvf: fix misplaced newline in VLAN add warning message
ixgbe: fix typos in ixgbe driver comments
idpf: remove duplicate defines in IDPF_CAP_RSS
i40e: avoid redundant VF link state updates
ice: Allow 100M speed for E825C SGMII device
ice: implement configurable header split for regular Rx
ice: switch to Page Pool
ice: drop page splitting and recycling
ice: remove legacy Rx and construct SKB
====================
Link: https://patch.msgid.link/20251029231218.1277233-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the missing interconnects to the USB2 host. The Fixes tag points to
the commit which broke probing of the USB host on that platform.
Fixes: 130733a100 ("interconnect: qcom: msm8996: Promote to core_initcall")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Acked-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20251002-fix-msm8996-icc-v1-2-a36a05d1f869@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
>From the initial submission the interconnect driver missed the link from
SNOC_PNOC to the USB 2 configuration space. Add missing link in order to
let the platform configure and utilize this path.
Fixes: 7add937f52 ("interconnect: qcom: Add MSM8996 interconnect provider driver")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251002-fix-msm8996-icc-v1-1-a36a05d1f869@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The mixed SQE support assumes that userspace always passes valid data,
that is not the case. Validate the opcode properly before indexing
the io_issue_defs[] array, and pass it through the nospec indexing
as well as it's a user valid indexing a kernel array.
Fixes: 1cba30bf9f ("io_uring: add support for IORING_SETUP_SQE_MIXED")
Reported-by: syzbot+b883b008a0b1067d5833@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Initialize the bmi_target_info structure using = {} at declaration time
instead of calling memset() in each bus-specific code path. This
simplifies the code and avoids an explicit memset.
Signed-off-by: Zhongqiu Han <zhongqiu.han@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251030130023.1836808-3-zhongqiu.han@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Initialize the pm_qos_request structure using = {} instead of memset() in
ath10k_download_fw(). This ensures the structure is properly zeroed before
passing it to cpu_latency_qos_add_request(), and improves efficiency by
avoiding an explicit runtime memset.
Signed-off-by: Zhongqiu Han <zhongqiu.han@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251030130023.1836808-2-zhongqiu.han@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
During scan and remain-on-channel requests, a scan link vif (arvif) is
assigned and a temporary vdev is created. If vdev creation fails, the
assigned arvif is left attached until the virtual interface is removed,
leaving a stale link in ahvif.
Fix this by freeing the stale arvif and resetting the corresponding link in
ahvif by calling ath12k_mac_unassign_link_vif() when vdev creation fails.
While at it, propagate the actual error code from ath12k_mac_vdev_create()
instead of returning -EINVAL in ath12k_mac_initiate_hw_scan().
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Fixes: 477cabfdb7 ("wifi: ath12k: modify link arvif creation and removal for MLO")
Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251026182254.1399650-3-rameshkumar.sundaram@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently, vdev limit check is performed only in
ath12k_mac_assign_vif_to_vdev(). If the host has already created
maximum number of vdevs for the radio (ar) and a scan request
arrives for the same radio, ath12k_mac_initiate_hw_scan() attempts
to create a vdev without checking the limit, causing firmware asserts.
Centralize the vdev limit guard by moving the check into
ath12k_mac_vdev_create() so that all callers obey the limit.
While doing this, update the condition from
`num_created_vdevs > (TARGET_NUM_VDEVS(ab) - 1)` to
`num_created_vdevs >= TARGET_NUM_VDEVS(ab)` for clarity and to
eliminate unnecessary arithmetic.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Fixes: 0d6e6736ed ("wifi: ath12k: scan statemachine changes for single wiphy")
Fixes: 4938ba733e ("wifi: ath12k: modify remain on channel for single wiphy")
Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251026182254.1399650-2-rameshkumar.sundaram@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
