This register read is not required in order to bring up any of the GPUs,
and it is read too early on Hopper/Blackwell+ GPUs anyway. So just stop
doing this.
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251025014050.585153-2-jhubbard@nvidia.com>
...which is sufficient to make Ada GPUs work, because they use the
pre-existing Ampere GPU code, unmodified.
Tested on AD102 (RTX 6000 Ada).
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251025012017.573078-1-jhubbard@nvidia.com>
This also changes .try_alter() to try_update().
After this commit, instead of "read, write and alter", the methods
available for registers are now "read, write and update".
This reads a lot easier for people who are used to working with
registers, and aligns the API with what e.g. regmap uses.
No functional changes are intended.
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
[acourbot@nvidia.com: add Link tag for context.]
[acourbot@nvidida.com: mention regmap in commit log.]
Link: https://lore.kernel.org/all/2c5d90c8-e73a-4f04-9c1d-30adbd0fef07@nvidia.com/
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251025010815.566909-2-jhubbard@nvidia.com>
Before this patch during either switchdev or legacy mode enablement we
cleared the mac address of vports between changes. This change allows us
to preserve the vports mac address between eswitch mode changes.
Vports hold information for VFs/SFs such as the permanent mac address.
VF/SF mac can be set either by iproute vf interface or devlink function
interface. For no obvious reason we reset it to 0 on switchdev/legacy
mode changes, this patch is fixing that, to align with other vport
information that are never reset, e.g GUID,mtu,promisc mode, etc ..
Signed-off-by: Adithya Jayachandran <ajayachandra@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Acked-by: Leon Romanovsky <leon@kernel.org> # RDMA
Heiko Stuebner says:
====================
DWMAC support for Rockchip RK3506
Some cleanups to the DT binding for Rockchip variants of the dwmac
and adding the RK3506 support on top.
As well as the driver-glue needed for setting up the correct RMII
speed seitings.
====================
Link: https://patch.msgid.link/20251023111213.298860-1-heiko@sntech.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The dwmac-rk glue driver is currently not caught by the general maintainer
entry for Rockchip SoCs, so add it explicitly, similar to the i2c driver.
The binding document in net/rockchip-dwmac.yaml already gets caught by
the wildcard match.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251023111213.298860-6-heiko@sntech.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the needed glue blocks for the RK3506-specific setup.
The RK3506 dwmac only supports up to 100MBit with a RMII PHY,
but no RGMII.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20251023111213.298860-5-heiko@sntech.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rockchip RK3506 has two Ethernet controllers based on Synopsys DWC
Ethernet QoS IP.
Add compatible string for the RK3506 variant.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20251023111213.298860-4-heiko@sntech.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A number of dwmac variants from Rockchip SoCs have turned up in the
Rockchip-specific binding, but not in the main list in snps,dwmac.yaml
which as the comment indicates is needed for accurate matching.
So add the missing rk3528, rk3568 and rv1126 to the main list.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20251023111213.298860-3-heiko@sntech.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lad Prabhakar says:
====================
net: ravb: SoC-specific configuration
This series addresses several issues in the Renesas Ethernet AVB (ravb)
driver related to SoC-specific resource configuration.
The series includes the following changes:
- Make DBAT entry count configurable per SoC
The number of descriptor base address table (DBAT) entries is not uniform
across all SoCs. Pass this information via the hardware info structure and
allocate resources accordingly.
- Allocate correct number of queues based on SoC support
Use the per-SoC configuration to determine whether a network control queue
is available, and allocate queues dynamically to match the SoC's
capability.
v2: https://lore.kernel.org/20251017151830.171062-1-prabhakar.mahadev-lad.rj@bp.renesas.com
====================
Link: https://patch.msgid.link/20251023112111.215198-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the per-SoC match data flag `nc_queues` to decide how many TX/RX
queues to allocate. If the SoC does not provide a network-control queue,
fall back to a single TX/RX queue. Obtain the match data before calling
alloc_etherdev_mqs() so the allocation is sized correctly.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://patch.msgid.link/20251023112111.215198-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Avoid wasting coherent DMA memory by allocating the descriptor base
address table sized for the actual number of DBAT/CDARq entries supported
by the SoC. Some platforms (for example GBETH) only provide two CDARq
entries; previously the driver always allocated space for 22 entries which
needlessly consumed memory on those systems.
Pass the per-SoC dbat_entry_num via struct ravb_hw_info and use it for
allocation and initialization in probe. This sizes the table correctly and
removes the unnecessary memory overhead on SoCs with fewer DBAT entries.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://patch.msgid.link/20251023112111.215198-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: stmmac: pcs support part 2
This is the next part of stmmac PCS support. Not much here, other than
dealing with what remains of the interrupts, which are the PCS AN
complete and PCS Link interrupts, which are just cleared and update
accounting.
Currently, they are enabled at core init time, but if we have an
implementation that supports multiple PHY interfaces, we want to
enable only the appropriate interrupts.
I also noticed that stmmac_fpe_configure_pmac() also modifies the
interrupt mask during run time. As a pre-requisit, we need a way
to ensure that we don't have different threads modifying the
interrupt settings at the same time. So, the first patch introduces
a new function and a spinlock which must be held when manipulating
the interrupt enable/mask state.
The second patch adds the PCS bits for enabling the PCS AN and PCS
link interrupts when the PCS is in-use.
====================
Link: https://patch.msgid.link/aPn5YVeUcWo4CW3c@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support to the PCS instance for controlling the PCS interrupts
depending on whether the PCS is used.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vBrtp-0000000BMYs-3bhI@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: add phylink managed WoL and convert stmmac
This series is implementing the thoughts of Andrew, Florian and myself
to improve the quality of Wake-on-Lan (WoL) implementations.
This changes nothing for MAC drivers that do not wish to participate in
this, but if they do, then they gain the benefit of phylink configuring
WoL at the point closest to the media as possible.
We first need to solve the problem that the multitude of PHY drivers
report their device supports WoL, but are not capable of waking the
system. Correcting this is fundamental to choosing where WoL should be
enabled - a mis-reported WoL support can render WoL completely
ineffective.
The only PHY drivers which uses the driver model's wakeup support is
drivers/net/phy/broadcom.c, and until recently, realtek. This means
we have the opportunity for PHY drivers to be _correctly_ converted
to use this method of signalling wake-up capability only when they can
actually wake the system, and thus providing a way for phylink to
know whether to use PHY-based WoL at all.
However, a PHY driver not implementing that logic doesn't become a
blocker to MACs wanting to convert. In full, the logic is:
- phylink supports a flag, wol_phy_legacy, which forces phylink to use
the PHY-based WoL even if the MDIO device is not marked as wake-up
capable.
- when wol_phy_legacy is not set, we check whether the PHY MDIO device
is wake-up capable. If it is, we offer the WoL request to the PHY.
- if neither wol_phy_legacy is set, or the PHY is not wake-up capable,
we do not offer the WoL request to the PHY.
In both cases, after setting any PHY based WoL, we remove the options
that the PHY now reports are enabled from the options mask, and offer
these (if any) to the MAC. The mac will get a "mac_set_wol()" method
call when any settings change.
Phylink mainatains the WoL state for the MAC, so there's no need for
a "mac_get_wol()" method. There may be the need to set the initial
state but this is not supported at present.
I've also added support for doing the PHY speed-up/speed-down at
suspend/resume time depending on the WoL state, which takes another
issue from the MAC authors.
Lastly, with phylink now having the full picture for WoL, the
"mac_wol" argument for phylink_suspend() becomes redundant, and for
MAC drivers that implement mac_set_wol(), the value passed becomes
irrelevant.
====================
Link: https://patch.msgid.link/aPnyW54J80h9DmhB@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert stmmac to use phylink-managed Wake-on-Lan support. To achieve
this, we implement the .mac_wol_set() method, which simply configures
the driver model's struct device wakeup for stmmac, and sets the
priv->wolopts appropriately.
When STMMAC_FLAG_USE_PHY_WOL is set, in the stmmac world this means to
only use the PHY's WoL support and ignore the MAC's WoL capabilities.
To preserve this behaviour, we enable phylink's legacy mode, and avoid
telling phylink that the MAC has any WoL support. This achieves the
same functionality for this case.
When STMMAC_FLAG_USE_PHY_WOL is not set, we provide the MAC's WoL
capabilities to phylink, which then allows phylink to choose between
the PHY and MAC for WoL depending on their individual capabilities
as described in the phylink commit. This only augments the WoL
functionality with PHYs that declare to the driver model that they are
wake-up capable. Currently, very few PHY drivers support this.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vBrRC-0000000BLzg-2tA4@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some drivers, e.g. stmmac, use the speed_up()/speed_down() APIs to
gain additional power saving during Wake-on-LAN where the PHY is
managing the state.
Add support to phylink for this, which can be enabled by the MAC
driver. Only change the PHY speed if the PHY is configured for
wake-up, but without any wake-up on the MAC side, as MAC side
means changing the configuration once the negotiation has
completed.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vBrR7-0000000BLza-2PjK@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add core phylink managed Wake-on-Lan support, which is enabled when the
MAC driver fills in the new .mac_wol_set() method that this commit
creates.
When this feature is disabled, phylink acts as it has in the past,
merely passing the ethtool WoL calls to phylib whenever a PHY exists.
No other new functionality provided by this commit is enabled.
When this feature is enabled, a more inteligent approach is used.
Phylink will first pass WoL options to the PHY, read them back, and
attempt to set any options that were not set at the PHY at the MAC.
Since we have PHY drivers that report they support WoL, and accept WoL
configuration even though they aren't wired up to be capable of waking
the system, we need a way to differentiate between PHYs that think
they support WoL and those which actually do. As PHY drivers do not
make use of the driver model's wake-up infrastructure, but could, we
use this to determine whether PHY drivers can participate. This gives
a path forward where, as MAC drivers are converted to this, it
encourages PHY drivers to also be converted.
Phylink will also ignore the mac_wol argument to phylink_suspend() as
it now knows the WoL state at the MAC.
MAC drivers are expected to record/configure the Wake-on-Lan state in
their .mac_set_wol() method, and deal appropriately with it in their
suspend/resume methods. The driver model provides assistance to set the
IRQ wake support which may assist driver authors in achieving the
necessary configuration.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vBrR2-0000000BLzU-1xYL@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add phy_may_wakeup() which uses the driver model's device_may_wakeup()
when the PHY driver has marked the device as wakeup capable in the
driver model, otherwise use phy_drv_wol_enabled().
Replace the sites that used to call phy_drv_wol_enabled() with this
as checking the driver model will be more efficient than checking the
WoL state.
Export phy_may_wakeup() so that phylink can use it.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vBrQx-0000000BLzO-1RLt@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add phy_can_wakeup() to report whether the PHY driver has marked the
PHY device as being wake-up capable as far as the driver model is
concerned.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vBrQs-0000000BLzI-0w3U@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=6x96
-----END PGP SIGNATURE-----
Merge tag 'v6.18-rc2-smb-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
"smbdirect (RDMA) fixes in order avoid potential submission queue
overflows:
- free transport teardown fix
- credit related fixes (five server related, one client related)"
* tag 'v6.18-rc2-smb-server-fixes' of git://git.samba.org/ksmbd:
smb: server: let free_transport() wait for SMBDIRECT_SOCKET_DISCONNECTED
smb: client: make use of smbdirect_socket.send_io.lcredits.*
smb: server: make use of smbdirect_socket.send_io.lcredits.*
smb: server: simplify sibling_list handling in smb_direct_flush_send_list/send_done
smb: server: smb_direct_disconnect_rdma_connection() already wakes all waiters on error
smb: smbdirect: introduce smbdirect_socket.send_io.lcredits.*
smb: server: allocate enough space for RW WRs and ib_drain_qp()
The function smc_find_ism_store_rc() is used to record the reason
why a suitable device (either ISM or RDMA) could not be found.
However, its name suggests it is ISM-specific, which is misleading.
Rename it to better reflect its actual usage.
No functional changes.
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251023020012.69609-1-dust.li@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix to avoid the usage of the `ret` variable uninitialized in the
following macro expansions.
It solves the following warning:
In file included from netlink-dumps.c:21:
netlink-dumps.c: In function ‘dump_extack’:
../kselftest_harness.h:788:35: warning: ‘ret’ may be used uninitialized [-Wmaybe-uninitialized]
788 | intmax_t __exp_print = (intmax_t)__exp; \
| ^~~~~~~~~~~
../kselftest_harness.h:631:9: note: in expansion of macro ‘__EXPECT’
631 | __EXPECT(expected, #expected, seen, #seen, ==, 0)
| ^~~~~~~~
netlink-dumps.c:169:9: note: in expansion of macro ‘EXPECT_EQ’
169 | EXPECT_EQ(ret, FOUND_EXTACK);
| ^~~~~~~~~
The issue can be reproduced, building the tests, with the command:
make -C tools/testing/selftests TARGETS=net
Signed-off-by: Alessandro Zanni <alessandro.zanni87@gmail.com>
Link: https://patch.msgid.link/20251023205354.28249-1-alessandro.zanni87@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima says:
====================
neighbour: Convert RTM_GETNEIGHTBL and RTM_SETNEIGHTBL to RCU.
Patch 1 & 2 are prep for RCU conversion for RTM_GETNEIGHTBL.
Patch 3 & 4 converts RTM_GETNEIGHTBL and RTM_SETNEIGHTBL to RCU.
Patch 5 converts the neighbour table rwlock to the plain spinlock.
====================
Link: https://patch.msgid.link/20251022054004.2514876-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Only neigh_for_each() and neigh_seq_start/stop() are on the
reader side of neigh_table.lock.
Let's convert rwlock to the plain spinlock.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251022054004.2514876-6-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
neightbl_set() fetches neigh_tables[] and updates attributes under
write_lock_bh(&tbl->lock), so RTNL is not needed.
neigh_table_clear() synchronises RCU only, and rcu_dereference_rtnl()
protects nothing here.
If we released RCU after fetching neigh_tables[], there would be no
synchronisation to block neigh_table_clear() further, so RCU is held
until the end of the function.
Another option would be to protect neigh_tables[] user with SRCU
and add synchronize_srcu() in neigh_table_clear().
But, holding RCU should be fine as we hold write_lock_bh() for the
rest of neightbl_set() anyway.
Let's perform RTM_SETNEIGHTBL under RCU and drop RTNL.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251022054004.2514876-5-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
neightbl_dump_info() calls these functions for each neigh_tables[]
entry:
1. neightbl_fill_info() for tbl->parms
2. neightbl_fill_param_info() for tbl->parms_list (except tbl->parms)
Both functions rely on the table lock (read_lock_bh(&tbl->lock))
and RTNL is not needed.
Let's fetch the table under RCU and convert RTM_GETNEIGHTBL to RCU.
Note that the first entry of tbl->parms_list is tbl->parms.list and
embedded in neigh_table, so list_next_entry() is safe.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251022054004.2514876-4-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
NEIGH_VAR() is read locklessly in the fast path, and IPv6 ndisc uses
NEIGH_VAR_SET() locklessly.
The next patch will convert neightbl_dump_info() to RCU.
Let's annotate accesses to neigh_param with READ_ONCE() and WRITE_ONCE().
Note that ndisc_ifinfo_sysctl_change() uses &NEIGH_VAR() and we cannot
use '&' with READ_ONCE(), so NEIGH_VAR_PTR() is introduced.
Note also that NEIGH_VAR_INIT() does not need WRITE_ONCE() as it is before
parms is published. Also, the only user hippi_neigh_setup_dev() is no
longer called since commit e3804cbebb ("net: remove COMPAT_NET_DEV_OPS"),
which looks wrong, but probably no one uses HIPPI and RoadRunner.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251022054004.2514876-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We will convert RTM_GETNEIGHTBL to RCU soon, where we traverse
tbl->parms_list under RCU in neightbl_dump_info().
Let's use RCU list helper for neigh_parms in neigh_parms_alloc()
and neigh_parms_release().
neigh_table_init() uses the plain list_add() for the default
neigh_parm that is embedded in the table and not yet published.
Note that neigh_parms_release() already uses call_rcu() to free
neigh_parms.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251022054004.2514876-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Clang is not happy with set but unused variable (this is visible
with `make W=1` build:
kernel/sched/sched.h:3744:18: error: variable 'cpumask' set but not used [-Werror,-Wunused-but-set-variable]
It seems like the variable was never used along with the assignment
that does not have side effects as far as I can see. Remove those
altogether.
Fixes: 223baf9d17 ("sched: Fix performance regression introduced by mm_cid")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- drm_panic: bunch of size calculation fixes
- pantor: fix kernel panic on partial gpu va unmap
- rockchip: hdmi hotplug setup fix
- amdgpu: dp mst, dc/display fixes
- i915: fix panic structure leak
- xe: madvise uapi fix, wq alloc error, vma flag handling fix
-----BEGIN PGP SIGNATURE-----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=EjON
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2025-10-24' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Simona Vetter:
"Very quiet, all just small stuff and nothing scary pending to my
knowledge:
- drm_panic: bunch of size calculation fixes
- pantor: fix kernel panic on partial gpu va unmap
- rockchip: hdmi hotplug setup fix
- amdgpu: dp mst, dc/display fixes
- i915: fix panic structure leak
- xe: madvise uapi fix, wq alloc error, vma flag handling fix"
* tag 'drm-fixes-2025-10-24' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe: Check return value of GGTT workqueue allocation
drm/amd/display: use GFP_NOWAIT for allocation in interrupt handler
drm/amd/display: increase max link count and fix link->enc NULL pointer access
drm/amd/display: Fix NULL pointer dereference
drm/panic: Fix 24bit pixel crossing page boundaries
drm/panic: Fix divide by 0 if the screen width < font width
drm/panic: Fix kmsg text drawing rectangle
drm/panic: Fix qr_code, ensure vmargin is positive
drm/panic: Fix overlap between qr code and logo
drm/panic: Fix drawing the logo on a small narrow screen
drm/xe/uapi: Hide the madvise autoreset behind a VM_BIND flag
drm/xe: Retain vma flags when recreating and splitting vmas for madvise
drm/i915/panic: fix panic structure allocation memory leak
drm/panthor: Fix kernel panic on partial unmap of a GPU VA region
drm/rockchip: dw_hdmi: use correct SCLIN mask for RK3228
-----BEGIN PGP SIGNATURE-----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=UcX7
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.18-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Add DWC custom pci_ops for the root bus instead of overwriting the
DBI base address, which broke drivers that rely on the DBI address
for iATU programming; fixes an FU740 probe regression (Krishna
Chaitanya Chundru)
- Revert qcom ECAM enablement, which is rendered unnecessary by the DWC
custom pci_ops (Krishna Chaitanya Chundru)
- Fix longstanding MIPS Malta resource registration issues to avoid
exposing them when the next commit fixes the boot failure (Maciej W.
Rozycki)
- Use pcibios_align_resource() on MIPS Malta to fix boot failure caused
by using the generic pci_enable_resources() (Ilpo Järvinen)
- Enable only ASPM L0s and L1, not L1 PM Substates, for devicetree
platforms because we lack information required to configure L1
Substates; fixes regressions on powerpc and rockchip. A qcom
regression (L1 Substates no longer enabled) remains and will be
addressed next (Bjorn Helgaas)
* tag 'pci-v6.18-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/ASPM: Enable only L0s and L1 for devicetree platforms
MIPS: Malta: Use pcibios_align_resource() to block io range
MIPS: Malta: Fix PCI southbridge legacy resource reservations
MIPS: Malta: Fix keyboard resource preventing i8042 driver from registering
Revert "PCI: qcom: Prepare for the DWC ECAM enablement"
PCI: dwc: Use custom pci_ops for root bus DBI vs ECAM config access
2dbbdeda77 ("sched_ext: Fix scx_bpf_dsq_insert() backward binary
compatibility") renamed the new bool-returning variant to scx_bpf_dsq_insert___v2
in the kernel. However, libbpf currently only strips ___SUFFIX on the BPF side,
not on kernel symbols, so the compat wrapper couldn't match the kernel kfunc and
would always fall back to the old variant even when the new one was available.
Add an extra ___compat suffix as a workaround - libbpf strips one suffix on the
BPF side leaving ___v2, which then matches the kernel kfunc directly. In the
future when libbpf strips all suffixes on both sides, all suffixes can be
dropped.
Fixes: 2dbbdeda77 ("sched_ext: Fix scx_bpf_dsq_insert() backward binary compatibility")
Cc: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Add missing kernel-doc parameter descriptions for five functions
in init_ohci1394_dma.c to fix documentation warnings when building
with W=1.
This patch addresses the following warnings:
- init_ohci1394_wait_for_busresets: missing @ohci description
- init_ohci1394_enable_physical_dma: missing @ohci description
- init_ohci1394_reset_and_init_dma: missing @ohci description
- init_ohci1394_controller: missing @num, @slot, @func descriptions
- setup_ohci1394_dma: missing @opt description
Tested with GCC 13.2.0 and W=1 flag. All documentation warnings
for these functions have been resolved.
Signed-off-by: Nirbhay Sharma <nirbhay.lkd@gmail.com>
Link: https://lore.kernel.org/r/20251024203219.101990-2-nirbhay.lkd@gmail.com
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Avoid some false-positive KMSAN warnings by restoring the dependency of
the architecture-optimized Poly1305 code on !KMSAN.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaPvOAhQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK9HxAQDpK0Js70YuHIbtRJIiLJSD13uYqc5z
UbHWSve7c6nIkwD+IVNcHZ04t4iiYCf1v7txPQa/vrJP3RpvrFIeSvSs5A8=
=f+r4
-----END PGP SIGNATURE-----
Merge tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library fix from Eric Biggers:
"Avoid some false-positive KMSAN warnings by restoring the dependency
of the architecture-optimized Poly1305 code on !KMSAN"
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: poly1305: Restore dependency of arch code on !KMSAN
-----BEGIN PGP SIGNATURE-----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=AS5A
-----END PGP SIGNATURE-----
Merge tag '6.18-rc2-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- add missing tracepoints
- smbdirect (RDMA) fix
- fix potential issue with credits underflow
- rename fix
- improvement to calc_signature and additional cleanup patch
* tag '6.18-rc2-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: #include cifsglob.h before trace.h to allow structs in tracepoints
cifs: Call the calc_signature functions directly
smb: client: get rid of d_drop() in cifs_do_rename()
cifs: Fix TCP_Server_Info::credits to be signed
cifs: Add a couple of missing smb3_rw_credits tracepoints
smb: client: allocate enough space for MR WRs and ib_drain_qp()
When removing a task from a FIFO DSQ, we must delete it from the list
before updating dsq->first_task, otherwise the following lookup will
just re-read the same task, leaving first_task pointing to removed
entry.
This issue only affects DSQs operating in FIFO mode, as priority DSQs
correctly update the rbtree before re-evaluating the new first task.
Remove the item from the list before refreshing the first task to
guarantee the correct behavior in FIFO DSQs.
Fixes: 44f5c8ec5b ("sched_ext: Add lockless peek operation for DSQs")
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Early revisions of commit 7abd69278b ("drm/xe/configfs: Add attribute
to disable GT types") used MAX_GT_TYPE_CHARS not only to size the
constant name field, but also for some of the string matching logic. By
the time the patch finally landed, the constant was no longer needed for
parsing. Stop using it for the string field definition as well; this
eliminates the risk that we forget to update the constant if we ever add
a GT type name longer than seven characters.
Suggested-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20251024200834.1512329-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
folio_nr_pages() is a faster helper function to get the number of pages when
NR_PAGES_IN_LARGE_FOLIO is enabled.
Signed-off-by: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Zoned storage devices provide marginal over-capacity space, typically
around 10%, for filesystem level storage control.
By utilizing this extra capacity, we can safely reduce the default
'valid_thresh_ratio' to 80. This action helps to significantly prevent
excessive garbage collection (GC) and the resulting power consumption,
as the filesystem becomes less aggressive about cleaning segments
that still hold a high percentage of valid data.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The current version missed setting one time GC for normal zoned GC
cycle. So, valid threshold control is not working. Need to fix it to
prevent excessive GC for zoned devices.
Fixes: e791d00bd0 ("f2fs: add valid block ratio not to do excessive GC for one time GC")
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
There's no point in doing all the other checks in
intel_vrr_is_capable() if the platform doesn't support VRR at all
Check HAS_VRR() before wasting time on the other checks.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251020185038.4272-23-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
The coment in intel_vrr_extra_vblank_delay() is a bit outdated now
that we generally got rid of the "vblank delay" stuff. Update the
comment to better describe the current state of things.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251020185038.4272-22-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
