There are many set but not used warnings under drivers/gpu/drm/amd when
compiling with the latest upstream mainline GCC:
drivers/gpu/drm/amd/amdgpu/amdgpu_gart.c:305:18: warning: variable ‘p’ set but not used [-Wunused-but-set-variable=]
drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.h:103:26: warning: variable ‘internal_reg_offset’ set but not used [-Wunused-but-set-variable=]
...
drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.h:164:26: warning: variable ‘internal_reg_offset’ set but not used [-Wunused-but-set-variable=]
...
drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:445:13: warning: variable ‘pipe_idx’ set but not used [-Wunused-but-set-variable=]
drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:875:21: warning: variable ‘pipe_idx’ set but not used [-Wunused-but-set-variable=]
Remove the variables actually not used or add __maybe_unused attribute for
the variables actually used to fix them, compile tested only.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's possible that unit_num is larger than 0 but save_count is zero,
since we do get bad page address but the address is invalid. Check
unit_num and save_count together.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Candice Li <candice.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add kernel docs for the functions related to hmm_range.
Documents added for functions:
amdgpu_hmm_range_valid
amdgpu_hmm_range_alloc
amdgpu_hmm_range_free
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently SRIOV runtime will use kiq to write HDP_MEM_FLUSH_CNTL for
hdp flush. This register need to be write from CPU for nbif to aware,
otherwise it will not work.
Implement amdgpu_kiq_hdp_flush and use kiq to do gpu hdp flush during
sriov runtime.
v2:
- fallback to amdgpu_asic_flush_hdp when amdgpu_kiq_hdp_flush failed
- add function amdgpu_mes_hdp_flush
v3:
- changed returned error
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add kiq hdp flush callbacks for gfx ips to support gpu hdp flush when no
ring presents
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is already a helper for telling if a block is valid, but if
IP handling wants to check if it's HW is enabled no such helper
exists.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
vram_usage was subtracting non-vram memory size,
which caused it to become negative.
Signed-off-by: Alysa Liu <Alysa.Liu@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Calling `smu_cmn_get_sysfs_buf` aligns the
offset used by `sysfs_emit_at` to the current page boundary, which was
previously directly returned from the various `print_clk_levels`
implementations to be added to the buffer position.
Instead, only the relative offset showing how much was written
to the buffer should be returned, regardless of how it was changed
for alignment purposes.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Ilya Zlobintsev <ilya.zlobintsev@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use memset32 instead of open coding it, just because it is
that bit nicer.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Current hdcp trace only tracks hdcp errors. We need to expand the trace
structure for more tracing information.
[how]
Add following traces for hdcp1:
- attempt_count
- downstream_device_count
Add following traces for hdcp2:
- attempt_count
- downstream_device_count
- hdcp1_device_downstream
- hdcp2_legacy_device_downstream
Reviewed-by: Sung Lee <sung.lee@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
full_update_required is too strict at update_planes_and_stream_state,
causing a performance regression due to too many updates being full.
[How]
* Carve out weak version of full_update_required for use inside
update_planes_and_stream_state.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Dominik Kaszewski <dominik.kaszewski@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
dc_check_update_surfaces_for_stream should not have access to entire
DC, especially not a mutable one. Concurrent checks should be able
to run independently of one another, without risk of changing state.
[How]
* Remove access to dc state other than debug and capacity.
* Move some checks from DC to DM caller.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Dominik Kaszewski <dominik.kaszewski@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
schedule_dc_vmin_vmax() is called by dm_crtc_high_irq(). Hence, we
cannot have the former sleep. Use GFP_NOWAIT for allocation in this
function.
Fixes: c210b757b4 ("drm/amd/display: fix dmub access race condition")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Sun peng (Leo) Li <sunpeng.li@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add some extra logs to better help triage blackscreen issues.
* Dump all the links to see if they have sinks associated.
* Print the edid manufacturer & product id associated with a stream that
was just created.
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
Enabling/disabling DCCG RCG should be done as a last-level step when
enabling/disable blocks. This is handled by HWSS root_clock_control
already during optimize_bandwidth.
However, dccg35_dpp_root_clock_control was missing the RCG enable
call on the disable path.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[how]
The commit update interfaces for dchubbub perfmon meansurement to better
reflect our requirements.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
dppclk rcg power down will flip the poweron flag in the cache to cause dppclk rcg will never
run the rcg ungate sequence in some condition. Wait 10us to let dpp dto fully ramp.
Reviewed-by: Ovidiu (Ovi) Bunea <ovidiu.bunea@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Driver only process hpd irq when a branch device or when
the link is established. It would cause some irq for bw_alloc
mode of dp tunneling are ignored.
[HOW]
Driver should process hpd irq if bw_alloc and dp tunneling
are enabled.
Reviewed-by: Cruise Hung <cruise.hung@amd.com>
Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update spacing so that fields with longer name will
still be aligned correctly (new fields to be added).
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
The DCN401 cursor offload path needs to take into account
use_mall_for_cursor, and also need to ensure the dcn32
function assigns the cursor cache fields (DCN401 uses the
dcn32 implementation).
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
1.) dc->links[MAX_LINKS] array size smaller than actual requested.
max_connector + max_dpia + 4 virtual = 14.
increase from 12 to 14.
2.) hw_init() access null LINK_ENC for dpia non display_endpoint.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Reviewed-by: Chris Park <chris.park@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the HDMI data channel reads to respect scdc_present field
to pass compliance test.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Relja Vojvodic <rvojvodi@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix a typo in a comment, change "enviroment" to "environment" in
drivers/gpu/drm/amd/display/dc/dml2/display_mode_core_structs.h
Signed-off-by: Aditya Gollamudi <adigollamudi@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
On a mst branch with multi display setup, dc context is obselete
after updating the first stream. Referencing the same dc context
for the next stream update to fetch dc pointer leads to NULL
pointer dereference.
[How]
Get the dc pointer from the link rather than context.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
this is a required logic based on HW programming guide.
tested/ported on dcn401.
Reviewed-by: Yihan Zhu <yihan.zhu@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add new option override_easf to use in_taps instead of internal
taps policy for debugging
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when using AMD aux backlight control, we avoid sending backlight
update commands to DMUB firmware because it is controlled by aux commands
in driver.
Reviewed-by: Iswara Nagulendran <iswara.nagulendran@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Harry VanZyllDeJong <hvanzyll@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The hive->event_mgr variable is used by both ras module
and legacy ras. To ensure the continuity of hive seqno
growth, after enabling ras module, it is forbidden to
operate the event_mgr variable in legacy ras.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When ras module is enabled, the bad pages will
be loaded by ras module.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In multi-gpu case, a fatal error will generate several
fatal error interrupts. After improving this function,
the ras module can reuse this function to only
handle the first interrupt.
V3:
Initialize event_id using RAS_EVENT_INVALID_ID.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add missing smb3_rw_credits tracepoints to cifs_readv_callback() (for SMB1)
to match those of SMB2/3.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.org>
cc: Shyam Prasad N <sprasad@microsoft.com>
cc: Tom Talpey <tom@talpey.com>
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Switch to a personal email account as I'll be leaving Red Hat soon.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20251013152613.3088777-1-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Yinhao et al. reported that their fuzzer tool was able to trigger a
skb_warn_bad_offload() from netif_skb_features() -> gso_features_check().
When a BPF program - triggered via BPF test infra - pushes the packet
to the loopback device via bpf_clone_redirect() then mentioned offload
warning can be seen. GSO-related features are then rightfully disabled.
We get into this situation due to convert___skb_to_skb() setting
gso_segs and gso_size but not gso_type. Technically, it makes sense
that this warning triggers since the GSO properties are malformed due
to the gso_type. Potentially, the gso_type could be marked non-trustworthy
through setting it at least to SKB_GSO_DODGY without any other specific
assumptions, but that also feels wrong given we should not go further
into the GSO engine in the first place.
The checks were added in 121d57af30 ("gso: validate gso_type in GSO
handlers") because there were malicious (syzbot) senders that combine
a protocol with a non-matching gso_type. If we would want to drop such
packets, gso_features_check() currently only returns feature flags via
netif_skb_features(), so one location for potentially dropping such skbs
could be validate_xmit_unreadable_skb(), but then otoh it would be
an additional check in the fast-path for a very corner case. Given
bpf_clone_redirect() is the only place where BPF test infra could emit
such packets, lets reject them right there.
Fixes: 850a88cc40 ("bpf: Expose __sk_buff wire_len/gso_segs to BPF_PROG_TEST_RUN")
Fixes: cf62089b0e ("bpf: Add gso_size to __sk_buff")
Reported-by: Yinhao Hu <dddddd@hust.edu.cn>
Reported-by: Kaiyan Mei <M202472210@hust.edu.cn>
Reported-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251020075441.127980-1-daniel@iogearbox.net
A refactoring bug introduced an argument order mistake in the call to
acpi_fwnode_get_reference_args() from __acpi_node_get_property_reference().
This caused incorrect behavior when resolving ACPI property references.
Fix the issue by correcting the argument order.
Fixes: e121be784d ("ACPI: property: Refactor acpi_fwnode_get_reference_args() to support nargs_prop")
Reported-by: Thomas Richard <thomas.richard@bootlin.com>
Closes: https://lore.kernel.org/all/1241f2b6-9b4e-4623-8a83-77db8774ac32@bootlin.com/
Tested-by: Thomas Richard <thomas.richard@bootlin.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251017100744.71871-1-sunilvl@ventanamicro.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmj1/XkACgkQnJ2qBz9k
QNmLiwgA73qlzETE1SvskqqX6JDRVezmRlfmJhGwoQhJARwJpn5Nim1QaSo2dQg8
XkVu58p8/aNKlwsN/2pZDu9uBw2njsiq9Q9cxh/6LJzifJdHQhe0LKHMOxVZfRnO
NeCjRAQKOAGubg15hvRqeTZXvxPGplWnyhf5gM7OtluaUiUS1Fie7NKq5jMA4c6u
g2xsCqYaAmC4tkOfAjGyZggY+F8XlvOmknHYq3cAoyHQc1WXVjCnyxW+7DufyWh7
QL2LnfdtHJ1ELPDzoQhKcpdDT42Ebnl3Fs7UfXGqH2D6jr03LxiLYL4C3LxiuX9n
bBmu4I3O6Id4L/e3wEN5n04pZKPR4w==
=OPPy
-----END PGP SIGNATURE-----
Merge tag 'fsnotify_for_v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify fixes from Jan Kara:
- Stop-gap solution for a race between unmount of a filesystem with
fsnotify marks and someone inspecting fdinfo of fsnotify group with
those marks in procfs.
A proper solution is in the works but it will get a while to settle.
- Fix for non-decodable file handles (used by unprivileged apps using
fanotify)
* tag 'fsnotify_for_v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fs/notify: call exportfs_encode_fid with s_umount
expfs: Fix exportfs_can_encode_fh() for EXPORT_FH_FID
It is reported that commit 85975daeaa ("cpuidle: menu: Avoid discarding
useful information") led to a performance regression on Intel Jasper Lake
systems because it reduced the time spent by CPUs in idle state C7 which
is correlated to the maximum frequency the CPUs can get to because of an
average running power limit [1].
Before that commit, get_typical_interval() would have returned UINT_MAX
whenever it had been unable to make a high-confidence prediction which
had led to selecting the deepest available idle state too often and
both power and performance had been inadequate as a result of that on
some systems. However, this had not been a problem on systems with
relatively aggressive average running power limits, like the Jasper Lake
systems in question, because on those systems it was compensated by the
ability to run CPUs faster.
It was addressed by causing get_typical_interval() to return a number
based on the recent idle duration information available to it even if it
could not make a high-confidence prediction, but that clearly did not
take the possible correlation between idle power and available CPU
capacity into account.
For this reason, revert most of the changes made by commit 85975daeaa,
except for one cosmetic cleanup, and add a comment explaining the
rationale for returning UINT_MAX from get_typical_interval() when it
is unable to make a high-confidence prediction.
Fixes: 85975daeaa ("cpuidle: menu: Avoid discarding useful information")
Closes: https://lore.kernel.org/linux-pm/36iykr223vmcfsoysexug6s274nq2oimcu55ybn6ww4il3g3cv@cohflgdbpnq7/ [1]
Reported-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3663603.iIbC2pHGDl@rafael.j.wysocki
Some debug messages generated by intel_pstate on a given hybrid system
are only printed for some CPUs which is confusing, so modify the driver
to print them for all CPUs. Also change those messages to avoid
printing local variable names in them.
Moreover, some debug messages printed by intel_pstate are quite hard
to understand without looking at the code printing them, so make them
somewhat clearer while at it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/8609836.T7Z3S40VBb@rafael.j.wysocki
Instead of using HWP-to-frequency scaling factors for computing cost
coefficients in the energy model used on hybrid systems, which is
fragile, rely on CPU type information that is easily accessible now and
the information on whether or not L3 cache is present for this purpose.
This also allows the cost coefficients for P-cores to be adjusted so
that they start to be populated somewhat earlier (that is, before
E-cores are loaded up to their full capacity).
In addition to the above, replace an inaccurate comment regarding the
reason why the freq value is added to the cost in hybrid_get_cost().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Yaxiong Tian <tianyaxiong@kylinos.cn>
Link: https://patch.msgid.link/5932894.DvuYhMxLoT@rafael.j.wysocki
