The v4l2_m2m_get_vq() function never returns NULL. The check was
probably intended to catch invalid format types, but that's not needed
as the V4L2 core picks the appropriate VIDIOC_G_FMT ioctl handler based
on the format type, so the type can't be incorrect. Drop the unneeded
return value check and, as the return value is not used for other
purposes and the function has no side effect, the function call as well.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The v4l2_m2m_get_vq() function never returns NULL. The check may have
been intended to catch invalid format types, but that's not needed as
the V4L2 core picks the appropriate VIDIOC_S_FMT ioctl handler based on
the format type, so the type can't be incorrect. Drop the unneeded
return value check.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The v4l2_m2m_get_vq() never returns a NULL pointer, as the internal
get_queue_ctx() helper always returns a non-NULL pointer. Many drivers
check the return value against NULL, due to a combination of old code
and cargo-cult programming. Even v4l2-mem2mem.c contains unneeded NULL
checks.
Clarify the API by documenting explicitly that a NULL check is not
needed, and simplify the code by removing the unneeded NULL checks from
v4l2-mem2mem.c.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Markus Schneider-Pargmann (TI.com) <msp@baylibre.com> says:
This series adds support for wakeup capabilities to the m_can driver,
which is necessary for enabling Partial-IO functionality on am62, am62a,
and am62p SoCs. It implements the wake-on-lan interface for m_can
devices and handles the pinctrl states needed for wakeup functionality.
am62, am62a and am62p support Partial-IO, a low power system state in
which nearly everything is turned off except the pins of the CANUART
group. This group contains mcu_mcan0, mcu_mcan1, wkup_uart0 and
mcu_uart0 devices.
To support mcu_mcan0 and mcu_mcan1 wakeup for the mentioned SoCs, the
series introduces a notion of wake-on-lan for m_can. If the user decides
to enable wake-on-lan for a m_can device, the device is set to wakeup
enabled. A 'wakeup' pinctrl state is selected to enable wakeup flags for
the relevant pins. If wake-on-lan is disabled the default pinctrl is
selected.
Partial-IO Overview
------------------
Partial-IO is a low power system state in which nearly everything is
turned off except the pins of the CANUART group (mcu_mcan0, mcu_mcan1,
wkup_uart0 and mcu_uart0). These devices can trigger a wakeup of the
system on pin activity. Note that this does not resume the system as the
DDR is off as well. So this state can be considered a power-off state
with wakeup capabilities.
A documentation can also be found in section 6.2.4 in the TRM:
https://www.ti.com/lit/pdf/spruiv7
Implementation Details
----------------------
The complete Partial-IO feature requires three coordinated series, each
handling a different aspect of the implementation:
1. This series (m_can driver): Implements device-specific wakeup
functionality for m_can devices, allowing them to be set as wakeup
sources.
2. Devicetree series: Defines system states and wakeup sources in the
devicetree for am62, am62a and am62p.
https://gitlab.baylibre.com/msp8/linux/-/tree/topic/am62-dt-partialio/v6.17?ref_type=heads
3. TI-SCI firmware series: Implements the firmware interface to enter
Partial-IO mode when appropriate wakeup sources are enabled.
https://gitlab.baylibre.com/msp8/linux/-/tree/topic/tisci-partialio/v6.17?ref_type=heads
Devicetree Bindings
-------------------
The wakeup-source property is used with references to
system-idle-states. This depends on the dt-schema pull request that adds
bindings for system-idle-states and updates the binding for
wakeup-source:
https://github.com/devicetree-org/dt-schema/pull/150
This is merged now and upstream in dt-schema.
Testing
-------
A test branch is available here that includes all patches required to
test Partial-IO:
https://gitlab.baylibre.com/msp8/linux/-/tree/integration/am62-partialio/v6.17?ref_type=heads
After enabling Wake-on-LAN the system can be powered off and will enter
the Partial-IO state in which it can be woken up by activity on the
specific pins:
ethtool -s can0 wol p
ethtool -s can1 wol p
poweroff
I tested these patches on am62-lp-sk.
Previous versions:
v1: https://lore.kernel.org/lkml/20240523075347.1282395-1-msp@baylibre.com/
v2: https://lore.kernel.org/lkml/20240729074135.3850634-1-msp@baylibre.com/
v3: https://lore.kernel.org/lkml/20241011-topic-mcan-wakeup-source-v6-12-v3-0-9752c714ad12@baylibre.com
v4: https://lore.kernel.org/r/20241015-topic-mcan-wakeup-source-v6-12-v4-0-fdac1d1e7aa6@baylibre.com
v5: https://lore.kernel.org/r/20241028-topic-mcan-wakeup-source-v6-12-v5-0-33edc0aba629@baylibre.com
v6: https://lore.kernel.org/r/20241219-topic-mcan-wakeup-source-v6-12-v6-0-1356c7f7cfda@baylibre.com
v7: https://lore.kernel.org/r/20250421-topic-mcan-wakeup-source-v6-12-v7-0-1b7b916c9832@baylibre.com
v8: https://lore.kernel.org/r/20250812-topic-mcan-wakeup-source-v6-12-v8-0-6972a810d63b@baylibre.com
v9: https://lore.kernel.org/r/20250820-topic-mcan-wakeup-source-v6-12-v9-0-0ac13f2ddd67@baylibre.com
Changes in v10:
- Change dt-binding to be able to set pinctrl-names = "default", "wakeup";
- Fix wording in the dt-binging
- Fix mcan commit message to have correct naming of the SoC
- Change function name from m_can_class_setup_optional_pinctrl() to
m_can_class_parse_pinctrl()
Changes in v9:
- Update the binding to accept the sleep pinctrl state which is
already in use by other devicetrees
- Modify suspend/resume to not set the sleep state if wakeup is enabled
and a wakeup pinctrl state is present. If wakeup pinctrl is active
this should be kept enabled even after suspend
- Modify m_can_set_wol() to use pinctrl_pm_select_default_state() to
get rid of the manually managed default pinctrl.
Changes in v8:
- Rebase to v6.17-rc1
Changes in v7:
- Separate this series from "firmware: ti_sci: Partial-IO support"
again as was requested internally
- All DT changes are now in their own series to avoid conflicts
- wakeup-source definition in the m_can binding is now only an
extension to the dt-schema binding and a pull request was created
Changes in v6:
- Rebased to v6.13-rc1
- After feedback of the other Partial-IO series, I updated this series
and removed all use of regulator-related patches.
- wakeup-source is now not only a boolean property but can also be a
list of power states in which the device is wakeup capable.
Changes in v5:
- Make the check of wol options nicer to read
Changes in v4:
- Remove leftover testing code that always returned -EIO in a specific
- Redesign pincontrol setup to be easier understandable and less nested
- Fix missing parantheses around wol_enable expression
- Remove | from binding description
Changes in v3:
- Rebase to v6.12-rc1
- Change 'wakeup-source' to only 'true'
- Simplify m_can_set_wol by returning early on error
- Add vio-suuply binding and handling of this optional property.
vio-supply is used to reflect the SoC architecture and which power
line powers the m_can unit. This is important as some units are
powered in special low power modes.
Changes in v2:
- Rebase to v6.11-rc1
- Squash these two patches for the binding into one:
dt-bindings: can: m_can: Add wakeup-source property
dt-bindings: can: m_can: Add wakeup pinctrl state
- Add error handling to multiple patches of the m_can driver
- Add error handling in m_can_class_allocate_dev(). This also required
to add a new patch to return error pointers from
m_can_class_allocate_dev().
Link: https://patch.msgid.link/20251001-topic-mcan-wakeup-source-v6-12-v10-0-4ab508ac5d1e@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
We have more detailed error values available, return them in the core
driver and the calling drivers to return proper errors to callers.
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Kendall Willis <k-willis@ti.com>
Signed-off-by: Markus Schneider-Pargmann (TI.com) <msp@baylibre.com>
Link: https://patch.msgid.link/20251001-topic-mcan-wakeup-source-v6-12-v10-3-4ab508ac5d1e@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In some devices the pins of the m_can module can act as a wakeup source.
This patch helps do that by connecting the PHY_WAKE WoL option to
device_set_wakeup_enable. By marking this device as being wakeup
enabled, this setting can be used by platform code to decide which
sleep or poweroff mode to use.
Also this prepares the driver for the next patch in which the pinctrl
settings are changed depending on the desired wakeup source.
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reviewed-by: Kendall Willis <k-willis@ti.com>
Signed-off-by: Markus Schneider-Pargmann (TI.com) <msp@baylibre.com>
Link: https://patch.msgid.link/20251001-topic-mcan-wakeup-source-v6-12-v10-2-4ab508ac5d1e@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The pins associated with m_can have to have a special configuration to
be able to wakeup the SoC from some system states. This configuration is
described in the wakeup pinctrl state while the default state describes
the default configuration. Also add the sleep state which is already in
use by some devicetrees.
Also m_can can be a wakeup-source if capable of wakeup.
Signed-off-by: Markus Schneider-Pargmann (TI.com) <msp@baylibre.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251001-topic-mcan-wakeup-source-v6-12-v10-1-4ab508ac5d1e@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The madvise implementation currently resets the SVM madvise if the
underlying CPU map is unmapped. This is in an attempt to mimic the
CPU madvise behaviour. However, it's not clear that this is a desired
behaviour since if the end app user relies on it for malloc()ed
objects or stack objects, it may not work as intended.
Instead of having the autoreset functionality being a direct
application-facing implicit UAPI, make the UMD explicitly choose
this behaviour if it wants to expose it by introducing
DRM_XE_VM_BIND_FLAG_MADVISE_AUTORESET, and add a semantics
description.
v2:
- Kerneldoc fixes. Fix a commit log message.
Fixes: a2eb8aec3e ("drm/xe: Reset VMA attributes to default in SVM garbage collector")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: "Falkowski, John" <john.falkowski@intel.com>
Cc: "Mrozek, Michal" <michal.mrozek@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://lore.kernel.org/r/20251015170726.178685-2-thomas.hellstrom@linux.intel.com
When splitting and restoring vmas for madvise, we only copied the
XE_VMA_SYSTEM_ALLOCATOR flag. That meant we lost flags for read_only,
dumpable and sparse (in case anyone would call madvise for the latter).
Instead, define a mask of relevant flags and ensure all are replicated,
To simplify this and make the code a bit less fragile, remove the
conversion to VMA_CREATE flags and instead just pass around the
gpuva flags after initial conversion from user-space.
Fixes: a2eb8aec3e ("drm/xe: Reset VMA attributes to default in SVM garbage collector")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20251015170726.178685-1-thomas.hellstrom@linux.intel.com
Compute kernels often issue memory copies immediately after completion.
If the memory being copied is an SVM pointer that was faulted into the
device and then bound via userptr, it is undesirable to move that
memory. Worse, if userptr is mixed between system and device memory, the
bind operation may be rejected.
Xe already has the necessary plumbing to support userptr with mixed
mappings. This update modifies GPUSVM's get_pages to correctly locate
pages in such mixed mapping scenarios.
v2:
- Rebase (Thomas Hellström)
v3:
- Remove Fixes tag.
v4:
- Break out from series since the other patch was merged.
- Update patch subject, ensure dri-devel and Maarten are CC'd.
Cc: Maarten Lankhorst <maarten.lankhorst@intel.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://lore.kernel.org/r/20251015120320.176338-1-thomas.hellstrom@linux.intel.com
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Document the Inline Crypto Engine (ICE) on the kaanapali platform.
Signed-off-by: Gaurav Kashyap <gaurav.kashyap@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Eugen Hristev <eugen.hristev@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
drgb_kcapi_sym() always returns 0, so make it return void instead.
Consequently, make drbg_ctr_bcc() return void too.
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
[Sergey: fixed the subject, refreshed the patch]
Signed-off-by: Karina Yankevich <k.yankevich@omp.ru>
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When authenc is invoked with MAY_BACKLOG, it needs to pass EINPROGRESS
notifications back up to the caller when the underlying algorithm
returns EBUSY synchronously.
However, if the EBUSY comes from the second part of an authenc call,
i.e., it is asynchronous, both the EBUSY and the subsequent EINPROGRESS
notification must not be passed to the caller.
Implement this by passing a mask to the function that starts the
second half of authenc and using it to determine whether EBUSY
and EINPROGRESS should be passed to the caller.
This was a deficiency in the original implementation of authenc
because it was not expected to be used with MAY_BACKLOG.
Reported-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: 180ce7e810 ("crypto: authenc - Add EINPROGRESS check")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Several crypto user API contexts and requests allocated with
sock_kmalloc() were left uninitialized, relying on callers to
set fields explicitly. This resulted in the use of uninitialized
data in certain error paths or when new fields are added in the
future.
The ACVP patches also contain two user-space interface files:
algif_kpp.c and algif_akcipher.c. These too rely on proper
initialization of their context structures.
A particular issue has been observed with the newly added
'inflight' variable introduced in af_alg_ctx by commit:
67b164a871 ("crypto: af_alg - Disallow multiple in-flight AIO requests")
Because the context is not memset to zero after allocation,
the inflight variable has contained garbage values. As a result,
af_alg_alloc_areq() has incorrectly returned -EBUSY randomly when
the garbage value was interpreted as true:
https://github.com/gregkh/linux/blame/master/crypto/af_alg.c#L1209
The check directly tests ctx->inflight without explicitly
comparing against true/false. Since inflight is only ever set to
true or false later, an uninitialized value has triggered
-EBUSY failures. Zero-initializing memory allocated with
sock_kmalloc() ensures inflight and other fields start in a known
state, removing random issues caused by uninitialized data.
Fixes: fe869cdb89 ("crypto: algif_hash - User-space interface for hash operations")
Fixes: 5afdfd22e6 ("crypto: algif_rng - add random number generator support")
Fixes: 2d97591ef4 ("crypto: af_alg - consolidation of duplicate code")
Fixes: 67b164a871 ("crypto: af_alg - Disallow multiple in-flight AIO requests")
Cc: stable@vger.kernel.org
Signed-off-by: Shivani Agarwal <shivani.agarwal@broadcom.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The HW RNG core allows for manual selection of which RNG device to use,
but does not allow for no device to be enabled. It may be desirable to
do this on systems with only a single suitable hardware RNG, where we
need exclusive access to other functionality on this device. In
particular when performing TPM firmware upgrades this lets us ensure the
kernel does not try to access the device.
Before:
root@debian-qemu-efi:~# grep "" /sys/devices/virtual/misc/hw_random/rng_*
/sys/devices/virtual/misc/hw_random/rng_available:tpm-rng-0
/sys/devices/virtual/misc/hw_random/rng_current:tpm-rng-0
/sys/devices/virtual/misc/hw_random/rng_quality:1024
/sys/devices/virtual/misc/hw_random/rng_selected:0
After:
root@debian-qemu-efi:~# grep "" /sys/devices/virtual/misc/hw_random/rng_*
/sys/devices/virtual/misc/hw_random/rng_available:tpm-rng-0 none
/sys/devices/virtual/misc/hw_random/rng_current:tpm-rng-0
/sys/devices/virtual/misc/hw_random/rng_quality:1024
/sys/devices/virtual/misc/hw_random/rng_selected:0
root@debian-qemu-efi:~# echo none > /sys/devices/virtual/misc/hw_random/rng_current
root@debian-qemu-efi:~# grep "" /sys/devices/virtual/misc/hw_random/rng_*
/sys/devices/virtual/misc/hw_random/rng_available:tpm-rng-0 none
/sys/devices/virtual/misc/hw_random/rng_current:none
grep: /sys/devices/virtual/misc/hw_random/rng_quality: No such device
/sys/devices/virtual/misc/hw_random/rng_selected:1
(Observe using bpftrace no calls to TPM being made)
root@debian-qemu-efi:~# echo "" > /sys/devices/virtual/misc/hw_random/rng_current
root@debian-qemu-efi:~# grep "" /sys/devices/virtual/misc/hw_random/rng_*
/sys/devices/virtual/misc/hw_random/rng_available:tpm-rng-0 none
/sys/devices/virtual/misc/hw_random/rng_current:tpm-rng-0
/sys/devices/virtual/misc/hw_random/rng_quality:1024
/sys/devices/virtual/misc/hw_random/rng_selected:0
(Observe using bpftrace that calls to the TPM resume)
Signed-off-by: Jonathan McDowell <noodles@meta.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As kcalloc() may fail, check its return value to avoid a NULL pointer
dereference when passing the buffer to rng->read(). On allocation
failure, log the error and return since test_len() returns void.
Fixes: 2be0d806e2 ("crypto: caam - add a test for the RNG")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert the Devicetree binding documentation for microchip,pic32mzda-rng
from plain text to YAML.
Signed-off-by: Kael D'Alcamo <dev@kael-k.io>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace simple_strtoul() with the recommended kstrtouint() for parsing
the 'hifn_pll_ref=' module parameter. Unlike simple_strtoul(), which
returns an unsigned long, kstrtouint() converts the string directly to
an unsigned integer and avoids implicit casting.
Check the return value of kstrtouint() and fall back to 66 MHz if
parsing fails. This adds error handling while preserving existing
behavior for valid values, and removes use of the deprecated
simple_strtoul() helper.
Add a space in the log message to correctly format "66 MHz" while we're
at it.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace simple_strtol() with the recommended kstrtoint() for parsing the
'fips=' boot parameter. Unlike simple_strtol(), which returns a long,
kstrtoint() converts the string directly to an integer and avoids
implicit casting.
Check the return value of kstrtoint() and reject invalid values. This
adds error handling while preserving existing behavior for valid values,
and removes use of the deprecated simple_strtol() helper.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Versal TRNG IP does not support Derivation Function (DF) of seed.
Add DF processing for CTR_DRBG mode.
Signed-off-by: Harsh Jain <h.jain@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Export drbg_ctr_df() derivative function to new module df_sp80090.
Signed-off-by: Harsh Jain <h.jain@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
can_change_mtu() became obsolete by commit 2304993860 ("can: populate the
minimum and maximum MTU values"). Now that net_device->min_mtu and
net_device->max_mtu are populated, all the checks are already done by
dev_validate_mtu() in net/core/dev.c.
Remove the net_device_ops->ndo_change_mtu() callback of all the physical
interfaces, then remove can_change_mtu(). Only keep the vcan_change_mtu()
and vxcan_change_mtu() because the virtual interfaces use their own
different MTU logic.
The only functional change this patch introduces is that now the user will
be able to change the MTU even if the interface is up. This does not matter
for Classical CAN and CAN FD because their MTU range is composed of only
one value, respectively CAN_MTU and CANFD_MTU. For the upcoming CAN XL, the
MTU will be configurable within the CANXL_MIN_MTU to CANXL_MAX_MTU range at
any time, even if the interface is up. This is consistent with the other
net protocols and does not contradict ISO 11898-1:2024 as having a
modifiable MTU is a kernel extension.
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20251003-remove-can_change_mtu-v1-1-337f8bc21181@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch has been split from the original series [1].
In some SoCs (observed on the STM32MP15) the M_CAN IP core keeps the CAN
state and CAN error counters over an internal reset cycle. The STM32MP15
SoC provides an external reset, which is shared between both M_CAN cores.
Add support for an optional external reset. Take care of shared resets,
de-assert reset during the probe phase in m_can_class_register() and while
the interface is up, assert the reset otherwise.
[1] https://lore.kernel.org/all/20250923-m_can-fix-state-handling-v3-0-06d8baccadbf@pengutronix.de
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://patch.msgid.link/20251008-m_can-add-reset-v1-1-49f0bbf820c4@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Due to the wider deployment of the ->sync_state() support, for PM domains
for example, we are receiving reports about the sync_state() pending
message that is being logged in fw_devlink_dev_sync_state(). In particular
as it's printed at the warning level, which is questionable.
Even if it certainly is useful to know that the ->sync_state() condition
could not be met, there may be nothing wrong with it. For example, a driver
may be built as module and are still waiting to be initialized/probed. For
this reason let's move to the info level for now.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Sebin Francis <sebin.francis@ti.com>
Reported-by: Diederik de Haas <didi.debian@cknow.org>
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Saravana Kannan <saravanak@google.com>
Reviewed-by: Sebin Francis <sebin.francis@ti.com>
Tested-by: Sebin Francis <sebin.francis@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When executing kvm_riscv_vcpu_aia_has_interrupts, the vCPU may have
migrated and the IMSIC VS-file have not been updated yet, currently
the HGEIP CSR should be read from the imsic->vsfile_cpu ( the pCPU
before migration ) via on_each_cpu_mask, but this will trigger an
IPI call and repeated IPI within a period of time is expensive in
a many-core systems.
Just let the vCPU execute and update the correct IMSIC VS-file via
kvm_riscv_vcpu_aia_imsic_update may be a simple solution.
Fixes: 4cec89db80 ("RISC-V: KVM: Move HGEI[E|P] CSR access to IMSIC virtualization")
Signed-off-by: Fangyu Yu <fangyu.yu@linux.alibaba.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20251016012659.82998-1-fangyu.yu@linux.alibaba.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Robert recently reported two corrupted images that can cause system
crashes, which are related to the new encoded extents introduced
in Linux 6.15:
- The first one [1] has plen != 0 (e.g. plen == 0x2000000) but
(plen & Z_EROFS_EXTENT_PLEN_MASK) == 0. It is used to represent
special extents such as sparse extents (!EROFS_MAP_MAPPED), but
previously only plen == 0 was handled;
- The second one [2] has pa 0xffffffffffdcffed and plen 0xb4000,
then "cur [0xfffffffffffff000] += bvec.bv_len [0x1000]" in
"} while ((cur += bvec.bv_len) < end);" wraps around, causing an
out-of-bound access of pcl->compressed_bvecs[] in
z_erofs_submit_queue(). EROFS only supports 48-bit physical block
addresses (up to 1EiB for 4k blocks), so add a sanity check to
enforce this.
Fixes: 1d191b4ca5 ("erofs: implement encoded extent metadata")
Reported-by: Robert Morris <rtm@csail.mit.edu>
Closes: https://lore.kernel.org/r/75022.1759355830@localhost [1]
Closes: https://lore.kernel.org/r/80524.1760131149@localhost [2]
Reviewed-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Enable AMD APML related features
- add amd sbrmi node for SoC power reading
- add amd sbtsi node for SoC temperature reading
- rename the P0_I3C_APML_ALERT_L GPIO to align with the naming
convention expected by the AMD APML tool
Signed-off-by: Fred Chen <fredchen.openbmc@gmail.com>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Add GPIO line name for userspace control or monitoring
- Add leak-related line names to report chassis leak event
- Add debug-card-mux to control debug card access
- Add FM_MAIN_PWREN_RMC_EN_ISO_R to receive RMC power control signal
Signed-off-by: Fred Chen <fredchen.openbmc@gmail.com>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Add a 'bmc_ready_noled' LED on GPIOB3 with GPIO_TRANSITORY to ensure its
state resets on BMC reboot.
Signed-off-by: Fred Chen <fredchen.openbmc@gmail.com>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Add the mctp-controller property and MCTP node to enable frontend NIC
management via PLDM over MCTP.
Signed-off-by: Fred Chen <fredchen.openbmc@gmail.com>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
add power monitor and temperature sensors for extension boards in bus 6,
8, 10 and 13.
Signed-off-by: Fred Chen <fredchen.openbmc@gmail.com>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Add missing blank lines between DT nodes to follow the devicetree coding
style and improve readability.
No functional changes.
Signed-off-by: Fred Chen <fredchen.openbmc@gmail.com>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
"mac3" controller was removed from the initial version of fuji-data64
dts because the rgmii setting is incorrect, but dropping mac3 leads to
regression in the existing fuji platform, because fuji.dts simply
includes fuji-data64.dts.
This patch adds mac3 back to fuji-data64.dts to fix the fuji regression[1],
and rgmii settings need to be fixed later.
Fixes: b0f294fdfc ("ARM: dts: aspeed: facebook-fuji: Include facebook-fuji-data64.dts")
Link: https://lore.kernel.org/all/79ddc7b9-ef26-4959-9a16-aa4e006eb145@roeck-us.net/ [1]
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
The %pe format specifier is designed to print error pointers. It prints
a symbolic error name (eg. -EINVAL) and it makes the code simpler by
omitting PTR_ERR()
This patch fixes this cocci report:
./cyttsp5.c:927:3-10: WARNING: Consider using %pe to print PTR_ERR()
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://patch.msgid.link/20251013-ptr_err-v1-1-2c5efbd82952@chromium.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add device tree for the Meta (Facebook) Yosemite5 compute node,
based on the AST2600 BMC.
The Yosemite5 platform provides monitoring of voltages, power,
temperatures, and other critical parameters across the motherboard,
CXL board, E1.S expansion board, and NIC components. The BMC also
logs relevant events and performs appropriate system actions in
response to abnormal conditions.
Signed-off-by: Kevin Tung <kevin.tung.openbmc@gmail.com>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Document the new compatibles used on Meta Yosemite5.
Signed-off-by: Kevin Tung <kevin.tung.openbmc@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
On all platforms set_clock_selection() writes to a GRF register. This
requires certain clocks running and thus should happen before the
clocks are disabled.
This has been noticed on RK3576 Sige5, which hangs during system suspend
when trying to suspend the second network interface. Note, that
suspending the first interface works, because the second device ensures
that the necessary clocks for the GRF are enabled.
Cc: stable@vger.kernel.org
Fixes: 2f2b60a0ec ("net: ethernet: stmmac: dwmac-rk: Add gmac support for rk3588")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251014-rockchip-network-clock-fix-v1-1-c257b4afdf75@collabora.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Théo Lebrun says:
====================
net: macb: various cleanups
Fix many oddities inside the MACB driver. They accumulated in my
work-in-progress branch while working on MACB/GEM EyeQ5 support.
Part of this series has been seen on the lkml in March then June.
See below for a semblance of a changelog.
The initial goal was to post them alongside EyeQ5 support, but that
makes for too big of a series. It'll come afterwards, with new
features (interrupt coalescing, ethtool .set_channels() and XDP mostly).
[0]: https://lore.kernel.org/lkml/20250627-macb-v2-0-ff8207d0bb77@bootlin.com/
====================
Link: https://patch.msgid.link/20251014-macb-cleanup-v1-0-31cd266e22cd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Local variable `count` is useless: it counts number of DMA descriptors
used and returns it. But the return value is only checked for error.
Drop counting the number of DMA descriptors and return a usual
negative-if-error integer.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251014-macb-cleanup-v1-13-31cd266e22cd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The pattern:
entry = macb_tx_ring_wrap(bp, i);
tx_skb = &queue->tx_skb[entry];
is the exact definition of:
macb_tx_skb(queue, i);
The pattern:
entry = macb_tx_ring_wrap(bp, i);
desc = macb_tx_desc(queue, entry);
is redundant because macb_tx_desc() calls macb_tx_ring_wrap().
One explicit call to macb_tx_ring_wrap() is still required for checking
if it is the last buffer (TX_WRAP case).
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251014-macb-cleanup-v1-12-31cd266e22cd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Whenever min(a, b) is used with a and b unsigned variables or literals,
`make W=2` complains. Change four min() calls into umin().
stderr extract (GCC 11.2.0, MIPS Codescape):
./include/linux/minmax.h:68:57: warning: comparison is always true due
to limited range of data type [-Wtype-limits]
68 | #define __is_nonneg(ux) statically_true((long long)(ux) >= 0)
| ^~
drivers/net/ethernet/cadence/macb_main.c:2299:26: note: in expansion of
macro ‘min’
2299 | hdrlen = min(skb_headlen(skb), bp->max_tx_length);
| ^~~
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251014-macb-cleanup-v1-11-31cd266e22cd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The low 16 bits of GEM_DCFG6 tell us which queues are enabled in HW. In
theory, there could be holes in the bitfield. In practice, the macb
driver would fail if there were holes as most loops iterate upon
bp->num_queues. Only macb_init() iterated correctly.
- Drop bp->queue_mask field.
- Error out at probe if a hole is in the queue mask.
- Rely upon bp->num_queues for iteration.
- As we drop the queue_mask probe local variable, fix RCT.
- Compute queue_mask on the fly for TAPRIO using bp->num_queues.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251014-macb-cleanup-v1-10-31cd266e22cd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce macb_dma64() and macb_dma_ptp() helper functions.
Many codepaths are made simpler by dropping conditional compilation.
This implies two additional changes:
- Always compile related structure definitions inside <macb.h>.
- MACB_EXT_DESC can be dropped as it is useless now.
The common case:
#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
struct macb_dma_desc_64 *desc_64;
if (bp->hw_dma_cap & HW_DMA_CAP_64B) {
desc_64 = macb_64b_desc(bp, desc);
// ...
}
#endif
Is replaced by:
if (macb_dma64(bp)) {
struct macb_dma_desc_64 *desc_64 = macb_64b_desc(bp, desc);
// ...
}
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251014-macb-cleanup-v1-9-31cd266e22cd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
