xe_info_init() is getting a bit long and hard to follow. Break the
allocation and basic initialization of the xe_gt structures out to their
own functions.
v2:
- Rename new functions from init_* to alloc_*. (Gustavo)
- Move early NULL return of media GT before allocation. (Gustavo)
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-46-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
If the primary is GT is disabled via configfs, we can't read the GT
registers that would tell us whether the BIOS has disabled FlatCCS on a
platform that would otherwise have it; we'll just proceed as if the
FlatCCS is still enabled. This is similar to the situation seen by
SRIOV VFs and doesn't cause any functional problems since the hardware
will simply drop writes to the CCS region and reads will always come
back as 0 (indicating uncompressed data). We'll simply miss out on the
chance to avoid some unnecessary overhead during BO creation and
migration.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-45-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
If the primary GT is disabled, skip the check for this workaround (which
only applies to dgpu platforms where the primary GT cannot be NULL).
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-44-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Wa_22014953428 was incorrectly labelled with a release-specific ID
number rather than the cross-platform lineage number; fix that.
Also check that the GT is not NULL before trying to lookup the
workaround in it. Since this workaround only applies to DG2 discrete
GPUs (where the primary GT cannot be disabled), no coverage is lost.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-43-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Don't try to lookup Wa_14018094691 on a NULL GT when the primary GT is
disabled. Since this whole workaround centers around mid-thread
preemption behavior, the workaround isn't relevant if the primary GT
(where the engines that can do MTP live) is disabled.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-42-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
FUNC matches in RTP only pass the GT and hwe, preventing them from being
used effectively in device workarounds. Add an additional xe_device
parameter so that we can use them in device workarounds where a GT may
not be available.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-41-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
When Wa_22010954014 and Wa_14022085890 were first implemented, we didn't
have a device workaround infrastructure so we hacked them into the GT
workaround list. Now that we have proper device workaround support,
move them to the proper place. Note that Wa_14022085890 specifically
applies to BMG-G21 platforms, so this requires defining a BMG
subplatform to capture the correct subset of device IDs.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-40-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
If the primary GT is disabled via configfs, we shouldn't try to access
it to lookup BCS/CCS engine masks. For the purposes of IRQ reset (which
masks & disables interrupts in an sgunit register), assume all possible
instances are present.
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-39-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
The display part of Wa_22019338487 (i.e., avoiding use of stolen memory)
is using a platform test rather than an graphics/media IP test. Since
this workaround is focused on non-GT uses of stolen memory, it makes
sense that we'd want to still apply the workaround on affected platforms
even if the GTs themselves are disabled via configfs.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-38-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
If the primary GT is disabled via configfs, we need to make sure that we
don't search for this workaround on a NULL xe_gt pointer. Since we can
disable the primary GT only on igpu platforms, the media GT is the one
we'd want to check anyway for this workaround.
The ternary operators in ggtt_update_access_counter() were getting a bit
long/complicated, so rewrite them with regular if/else statements.
While we're at it, throw in a couple extra assertions to make sure that
we're truly picking the expected GT according to igpu/dgpu type.
v2:
- Adjust indentation/wrapping; it's easier to read this with longer,
unwrapped lines. (Lucas)
- Tweak wording of commit message to remove ambiguity. (Gustavo)
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-37-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
GT ID#0 (primary GT on tile 0) may not always be available if the
primary GT has been disabled via configfs. Instead use the first
available GT when determining which PMU events are supported. If there
are no GTs, then don't advertise any GT-related events.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-36-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
The hwconfig table is part of the primary GT's GuC firmware. If the
primary GT is disabled, the hwconfig is unavailable and should be
reported to userspace as having size 0.
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-35-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
If the primary GT is disabled via configfs, GT-side L2 and TD cache
flushes are unnecessary since nothing is using/filling these caches.
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-34-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
During the early days of the Xe driver, there were cases where we
accessed some fields in the primary GT's xe_gt structure before the GT
itself was formally initialized; this required that the structure itself
be allocated during xe_tile_init_early(). A lot of refactoring of the
device probe has happened since that time and there's no longer a need
to allocate the primary GT early. Move the allocation into
xe_info_init() where GT initialization happens and where we're doing the
allocation of the media GT.
v2:
- Only make this change after a separate patch to perform VF GMD_ID
lookup with a dummy GT instead of xe_root_mmio_gt().
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-33-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
SRIOV VF initialization has a bit of a chicken and egg design problem.
Determining the IP version of the graphics and media IPs can't be done
via direct register reads as it is on PF or native and instead requires
querying the GuC. However initialization of the GT, including its GuC,
needs to wait until after we know the IP versions so that the proper
initialization steps for the platform/IP are followed.
Currently the (somewhat hacky) solution is to manually fill out just
enough fields in tile 0's primary GT structure to make it look as if the
GT has been initialized so that the GuC can be partially initialized and
queried to obtain the GMD_ID values. When the GT gets properly
initialized during the regular flows, the hacked-up values will get
overwritten as part of the general initialization flows.
Rather than using tile 0's primary GT structure to hold the hacked up
values for querying every GT on every tile, instead allocate a dedicated
dummy structure. This will allow us to move the tile->primary_gt's
allocation to a more consistent place later in the initialization flow
in future patches (i.e., we shouldn't even allocate this GT structure if
the GT is disabled/unavailable). It also helps ensure there can't be
any accidental leakage of initialization or state between the dummy
initialization for GMD_ID and the real driver initialization of the GT.
v2:
- Initialize gt->tile for temporary GT. (CI, Michal)
- Use scope-based cleanup handler to free temp GT. (Michal)
- Propagate actual error code from xe_gt_sriov_vf_bootstrap() rather
than just setting IP version to 0.0 now that read_gmdid() can return
an error. (Michal)
v3:
- Explicitly initialize gt to NULL, just in case something else gets
inserted before the kzalloc() in the future. (Lucas)
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-32-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
FlatCCS presence/absence is a flag that should be tracked at the
platform level rather than the IP level. FlatCCS affects the
device-wide memory initialization and reservations so its effects are
not confined to a single IP block or GT. This is also a trait that
should be tied to the platform even if the graphics IP itself is not
present (e.g., if we disable the primary GT via configfs).
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-31-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Restrictions and requirements on VRAM alignment are something that
should be tracked at the platform level rather than the IP level. Even
when mixing and matching various graphics, media, and display IP blocks,
the platform as a whole has to have consistent memory allocation
handling. This is also a trait that should be tied to the platform even
if the graphics IP itself is not present (e.g., if we disable the
primary GT via configfs).
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-30-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
The number of page table levels for PPGTT virtual addresses is something
that should be tracked at the platform level rather than the IP level.
Even when mixing and matching various graphics, media, and display IP
blocks, the platform as a whole has to have consistent page table
handling. This is also a trait that should be tied to the platform even
if the graphics IP itself is not present (e.g., if we disable the
primary GT via configfs).
v2:
- Drop default value of 4 and explicitly set the value in each platform
descriptor. (Lucas)
v3:
- Drop outdated code comment and commit message paragraph about default
value. (Gustavo)
v4:
- Add missing setting for tgl_desc. (Gustavo)
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-29-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
The number of virtual address bits is something that should be tracked
at the platform level rather than the IP level. Even when mixing and
matching various graphics, media, and display IP blocks, the platform as
a whole has to have consistent page table handling. This is also a
trait that should be tied to the platform even if the graphics IP itself
is not present (e.g., if we disable the primary GT via configfs).
v2:
- Drop the default value of 48 and explicitly set it in each relevant
descriptor. (Lucas, Michal)
v3:
- Drop an outdated comment about default value. (Michal)
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-28-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Display interrupt handling has no relation to GT(s) on the platforms
supported by the Xe driver. We only call xe_display_irq_postinstall
with the first tile's primary GT, so the single condition that uses the
GT pointer within the function always evaluates to true. Drop the
unnecessary parameter and the condition.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-27-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
The HuC initialization code determines whether a platform can have a HuC
on the primary GT by checking whether tile->media_gt is NULL; old Xe1
platforms that combined render+media into a single GT will always have a
NULL media_gt pointer. However once we allow media to be disabled via
configfs, there will also be cases where tile->media_gt is NULL on more
modern platforms, causing this condition to behave incorrectly.
To handle cases where media gets disabled via configfs (or theoretical
cases where media is truly fused off in hardware), change the condition
to consider the graphics version of the primary GT; only the old Xe1
platforms with graphics versions 12.55 or earlier should try to
initialize a HuC on the primary GT.
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-26-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Currently, if find_and_map_user_pages() takes a DMA xfer request from the
user with a length field set to 0, or in a rare case, the host receives
QAIC_TRANS_DMA_XFER_CONT from the device where resources->xferred_dma_size
is equal to the requested transaction size, the function will return 0
before allocating an sgt or setting the fields of the dma_xfer struct.
In that case, encode_addr_size_pairs() will try to access the sgt which
will lead to a general protection fault.
Return an EINVAL in case the user provides a zero-sized ALP, or the device
requests continuation after all of the bytes have been transferred.
Fixes: 96d3c1cade ("accel/qaic: Clean up integer overflow checking in map_user_pages()")
Signed-off-by: Youssef Samir <quic_yabdulra@quicinc.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Carl Vanderlip <carl.vanderlip@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251007122320.339654-1-youssef.abdulrahman@oss.qualcomm.com
When a BO is created, qaic will use the page allocator to request the
memory chunks that the BO will be composed of in-memory. The number of
chunks increases when memory is segmented. For example, a 16MB BO can
be composed of four 4MB chunks or 4096 4KB chunks.
A BO is then sliced into a single or multiple slices to be transferred
to the device on the DBC's xfer queue. For that to happen, the slice
needs to encode its memory chunks into DBC requests and keep track of
them in an array, which is allocated using kcalloc(). Knowing that the
BO might be very fragmented, this array can grow so large that the
allocation may fail to find contiguous memory for it.
Replace kcalloc() with kvcalloc() to allocate the DBC requests array
for a slice.
Signed-off-by: Youssef Samir <quic_yabdulra@quicinc.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Carl Vanderlip <carl.vanderlip@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251007121845.337382-1-youssef.abdulrahman@oss.qualcomm.com
Kunit's generate_params() was recently updated to take an additional
test context parameter. Xe's IP and platform parameter generators were
updated accordingly at the same time, but the new parameter was not
added to the functions' kerneldoc, resulting in the following warnings:
Warning: drivers/gpu/drm/xe/tests/xe_pci.c:78 function parameter 'test' not described in 'xe_pci_fake_data_gen_params'
Warning: drivers/gpu/drm/xe/tests/xe_pci.c:254 function parameter 'test' not described in 'xe_pci_graphics_ip_gen_param'
Warning: drivers/gpu/drm/xe/tests/xe_pci.c:278 function parameter 'test' not described in 'xe_pci_media_ip_gen_param'
Warning: drivers/gpu/drm/xe/tests/xe_pci.c:302 function parameter 'test' not described in 'xe_pci_id_gen_param'
Warning: drivers/gpu/drm/xe/tests/xe_pci.c:390 function parameter 'test' not described in 'xe_pci_live_device_gen_param'
5 warnings as errors
Document the new parameter to eliminate the warnings and make CI happy.
Fixes: b9a214b5f6 ("kunit: Pass parameterized test context to generate_params()")
Reviewed-by: Shuicheng Lin <shuicheng.lin@intel.com>
Link: https://lore.kernel.org/r/20251013153014.2362879-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
As soon as we queue MHI buffers to receive the bootlog from the device,
we could be receiving data. Therefore all the resources needed to
process that data need to be setup prior to queuing the buffers.
We currently initialize some of the resources after queuing the buffers
which creates a race between the probe() and any data that comes back
from the device. If the uninitialized resources are accessed, we could
see page faults.
Fix the init ordering to close the race.
Fixes: 5f8df5c6de ("accel/qaic: Add bootlog debugfs")
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Carl Vanderlip <carl.vanderlip@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251007115750.332169-1-youssef.abdulrahman@oss.qualcomm.com
Since the Handover Protocol was deprecated, the recommended approach is
to provide an initrd using a UEFI boot service with the
LINUX_EFI_INITRD_MEDIA_GUID device path. Documentation for the new
approach has been no more than an admonition with a link to an existing
implementation.
Provide a short explanation of this functionality, to ease future
implementations without having to reverse engineer existing ones.
[Bagas: Don't use :ref: link to EFI stub documentation and refer to
OVMF/edk2 implementation]
Signed-off-by: Hugo Osvaldo Barrera <hugo@whynothugo.nl>
Link: https://lore.kernel.org/r/20250428131206.8656-2-hugo@whynothugo.nl
Co-developed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251013085718.27085-1-bagasdotme@gmail.com>
Since commit 9ba9d11544 ("media: ivtv: Access v4l2_fh from file")
all ioctl handlers have been ported to operate on the file * first
function argument.
The ivtv DVB layer calls ivtv_init_on_first_open() when the driver
needs to start streaming. This function calls the s_input() and
s_frequency() ioctl handlers directly, but being called from the driver
context, it doesn't have a valid file * to pass them. This causes the
ioctl handlers to deference an invalid pointer.
Fix this by moving the implementation of those ioctls to two helper
functions.
The ivtv_do_s_input() helper accepts a struct ivtv * as first argument,
which is easily accessible in ivtv_init_on_first_open() as well as from
the file * argument of the ioctl handler.
The ivtv_s_frequency() takes an ivtv_stream * instead. The stream * can
safely be accessed in ivtv_init_on_first_open() where it is hard-coded
to the IVTV_ENC_STREAM_TYPE_MPG stream type, as well as from the ioctl
handler as a valid stream type is associated to each open file handle
depending on which video device node has been opened in the ivtv_open()
file operation.
The bug has been reported by Smatch.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/aKL4OMWsESUdX8KQ@stanley.mountain/
Fixes: 9ba9d11544 ("media: ivtv: Access v4l2_fh from file")
Cc: stable@vger.kernel.org
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Sice commit 7b9eb53e85 ("media: cx18: Access v4l2_fh from file")
all ioctl handlers have been ported to operate on the file * first
function argument.
The cx18 DVB layer calls cx18_init_on_first_open() when the driver needs
to start streaming. This function calls the s_input(), s_std() and
s_frequency() ioctl handlers directly, but being called from the driver
context, it doesn't have a valid file * to pass them. This causes
the ioctl handlers to deference an invalid pointer.
Fix this by moving the implementation of those ioctls to functions that
take a cx18 pointer instead of a file pointer, and turn the V4L2 ioctl
handlers into wrappers that get the cx18 from the file. When calling
from cx18_init_on_first_open(), pass the cx18 pointer directly. This
allows removing the fake fh in cx18_init_on_first_open().
The bug has been reported by Smatch:
--> 1223 cx18_s_input(NULL, &fh, video_input);
The patch adds a new dereference of "file" but some of the callers pass a
NULL pointer.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/aKL4OMWsESUdX8KQ@stanley.mountain/
Fixes: 7b9eb53e85 ("media: cx18: Access v4l2_fh from file")
Cc: stable@vger.kernel.org
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Fix spelling of CIP_NO_HEADER to prevent a kernel-doc warning.
Warning: amdtp-stream.h:57 Enum value 'CIP_NO_HEADER' not described in enum 'cip_flags'
Warning: amdtp-stream.h:57 Excess enum value '%CIP_NO_HEADERS' description in 'cip_flags'
Fixes: 3b196c394d ("ALSA: firewire-lib: add no-header packet processing")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The jq command is used in vlan_bridge_binding.sh, if it is not supported,
the test will spam the following log.
# ./vlan_bridge_binding.sh: line 51: jq: command not found
# ./vlan_bridge_binding.sh: line 51: jq: command not found
# ./vlan_bridge_binding.sh: line 51: jq: command not found
# ./vlan_bridge_binding.sh: line 51: jq: command not found
# ./vlan_bridge_binding.sh: line 51: jq: command not found
# TEST: Test bridge_binding on->off when lower down [FAIL]
# Got operstate of , expected 0
The rtnetlink.sh has the same problem. It makes sense to check if jq is
installed before running these tests. After this patch, the
vlan_bridge_binding.sh skipped if jq is not supported:
# timeout set to 3600
# selftests: net: vlan_bridge_binding.sh
# TEST: jq not installed [SKIP]
Fixes: dca12e9ab7 ("selftests: net: Add a VLAN bridge binding selftest")
Fixes: 6a414fd77f ("selftests: rtnetlink: Add an address proto test")
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20251013080039.3035898-1-wangliang74@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, it is possible to configure IFLA_HSR_VERSION, but
there is no way to check in userspace what the currently
configured HSR protocol version is.
Add it to the output of hsr_fill_info(), when the interface
is using the HSR protocol. Let's not expose it when using
the PRP protocol, since it only has one version and it's
not possible to set it from userspace.
This info could then be used by e.g. ip(8), like so:
$ ip -d link show hsr0
12: hsr0: <BROADCAST,MULTICAST> mtu ...
...
hsr slave1 veth0 slave2 veth1 ... proto 0 version 1
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Jan Vaclav <jvaclav@redhat.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251009210903.1055187-6-jvaclav@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit cbd9463da1 ("media: v4l2-mem2mem: Avoid calling .device_run in
v4l2_m2m_job_finish") deferred calls to .device_run() to a work queue to
avoid recursive calls when a job is finished right away from
.device_run(). It failed to update the v4l2_m2m_job_finish()
documentation that still states the function must not be called from
.device_run(). Fix it.
Fixes: cbd9463da1 ("media: v4l2-mem2mem: Avoid calling .device_run in v4l2_m2m_job_finish")
Cc: stable@vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
In cec_devnode_init(), the debugfs directory created with
debugfs_create_dir() is not removed if bus_register() fails.
This leaves a stale "cec" entry in debugfs and prevents
proper module reloading.
Fix this by removing the debugfs directory in the error path.
Fixes: a56960e8b4 ("[media] cec: add HDMI CEC framework (core)")
Cc: stable@vger.kernel.org
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Driver is not used anymore. Remove header file.
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
STi c8sectpfe device is only used on B2120 boards, which support has
been withdrawn in commit dee546e1ad ("ARM: sti: drop B2120 board
support").
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Replace iio_push_to_buffers_with_timestamp() with
iio_push_to_buffers_with_ts(). This adds an extra argument with the
buffer size to ensure that we aren't writing past the end of the buffer.
No functional change.
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Closes: https://lore.kernel.org/linux-iio/20250724115610.011110fb@jic23-huawei/
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Use aligned_s64 for IIO timestamp field instead of explicit __align().
This is the convention used throughout the IIO subsystem. No functional
change.
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Closes: https://lore.kernel.org/linux-iio/20250724115610.011110fb@jic23-huawei/
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
vidtv_channel_si_init() creates a temporary list (program, service, event)
and ownership of the memory itself is transferred to the PAT/SDT/EIT
tables through vidtv_psi_pat_program_assign(),
vidtv_psi_sdt_service_assign(), vidtv_psi_eit_event_assign().
The problem here is that the local pointer where the memory ownership
transfer was completed is not initialized to NULL. This causes the
vidtv_psi_pmt_create_sec_for_each_pat_entry() function to fail, and
in the flow that jumps to free_eit, the memory that was freed by
vidtv_psi_*_table_destroy() can be accessed again by
vidtv_psi_*_event_destroy() due to the uninitialized local pointer, so it
is freed once again.
Therefore, to prevent use-after-free and double-free vulnerability,
local pointers must be initialized to NULL when transferring memory
ownership.
Cc: <stable@vger.kernel.org>
Reported-by: syzbot+1d9c0edea5907af239e0@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=1d9c0edea5907af239e0
Fixes: 3be8037960 ("media: vidtv: add error checks")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The pvr2_trace message is reporting an error about control read
transfers, however it is using the incorrect variable write_len
instead of read_lean. Fix this by using the correct variable
read_len.
Fixes: d855497edb ("V4L/DVB (4228a): pvrusb2 to kernel 2.6.18")
Cc: stable@vger.kernel.org
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
It's possible for max1 to remain -1 if msp_read() always fail. This
variable is further used as index for accessing arrays.
Fix that by checking max1 prior to array accesses.
It seems that restart is the preferable action in case of out-of-bounds
value.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 8a4b275f9c ("V4L/DVB (3427): audmode and rxsubchans fixes (VIDIOC_G/S_TUNER)")
Cc: stable@vger.kernel.org
Signed-off-by: Ivan Abramov <i.abramov@mt-integration.ru>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
It's possible for cp_read() and hdmi_read() to return -EIO. Those
values are further used as indexes for accessing arrays.
Fix that by checking return values where it's needed.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: a89bcd4c6c ("[media] adv7842: add new video decoder driver")
Cc: stable@vger.kernel.org
Signed-off-by: Ivan Abramov <i.abramov@mt-integration.ru>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The delayed_work delayed_work_enable_hotplug is initialized with
INIT_DELAYED_WORK() in adv76xx_probe(), but it is never scheduled
anywhere in the probe function.
Calling cancel_delayed_work() on a work that has never been
scheduled is redundant and unnecessary, as there is no pending
work to cancel.
Remove the redundant cancel_delayed_work() from error handling
path and adjust the goto label accordingly to simplify the code
and avoid potential confusion.
Fixes: 54450f591c ("[media] adv7604: driver for the Analog Devices ADV7604 video decoder")
Cc: stable@vger.kernel.org
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The delayed_work delayed_work_enable_hotplug is initialized with
INIT_DELAYED_WORK() in adv7842_probe(), but it is never scheduled
anywhere in the probe function.
Calling cancel_delayed_work() on a work that has never been
scheduled is redundant and unnecessary, as there is no pending
work to cancel.
Remove the redundant cancel_delayed_work() from error handling
path and adjust the goto label accordingly to simplify the code
and avoid potential confusion.
Fixes: a89bcd4c6c ("[media] adv7842: add new video decoder driver")
Cc: stable@vger.kernel.org
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The delayed_work delayed_work_enable_hpd is initialized with
INIT_DELAYED_WORK(), but it is never scheduled in tda1997x_probe().
Calling cancel_delayed_work() on a work that has never been
scheduled is redundant and unnecessary, as there is no pending
work to cancel.
Remove the redundant cancel_delayed_work() from error handling
path in tda1997x_probe() to avoid potential confusion.
Fixes: 9ac0038db9 ("media: i2c: Add TDA1997x HDMI receiver driver")
Cc: stable@vger.kernel.org
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Change the 'ret' variable from u8/u32 to int to store zero or negative
error codes returned by other functions.
Storing the negative error codes in unsigned type, doesn't cause an issue
at runtime but it's ugly as pants.
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
For ternary operators in the form of a ? true : false, if a itself returns
a boolean result, the ternary operator can be omitted. Remove redundant
ternary operators to clean up the code.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
For ternary operators in the form of a ? true : false, if a itself returns
a boolean result, the ternary operator can be omitted. Remove redundant
ternary operators to clean up the code.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Acked-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Shreeya no longer works at Collabora, set Dmitry as maintainer of
the Synopsys HDMI RX binding.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Shreeya no longer works at Collabora, set Dmitry as maintainer of
the Synopsys HDMI RX driver.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
