Tomonori writes:
"This adds the Rust equivalent of the C's DO_ONCE_LITE and pr_*_once
macros.
A proposal for this feature was made in the past [1], but it didn't
reach consensus on the implementation and wasn't merged.
Unlike the previous proposal, this implements the C's DO_ONCE_LITE
mechanism using a single atomic variable. While it would be possible
to implement the feature entirely as a Rust macro, the functionality
that can be implemented as regular functions has been extracted and
implemented as the OnceLite struct for better code readability.
To make it clear that this feature is intended solely for
print-related functionality (just like in C), the implementation is
placed in print.rs. If an equivalent of std::sync::Once is needed in
the future, it should be based on SetOnce rather than OnceLite. Unlike
std::sync::Once and SetOnce, OnceLite only manages two states:
incomplete and complete.
The do_once_lite macro places the OnceLite object in the .data..once
section, which may be zeroed by memset at any time. While this means
tear reads might happen, OnceLite only manages two states (zero and
non-zero), so no actual problem occurs in practice.
OnceLite currently uses Atomic<i32>, but may be changed to use
Atomic<i8> [2] when it becomes available."
Link: https://lore.kernel.org/rust-for-linux/20241126-pr_once_macros-v4-0-410b8ca9643e@tuta.io/ [1]
Link: https://lore.kernel.org/rust-for-linux/20251115050305.3872412-1-fujita.tomonori@gmail.com/ [2]
Link: https://patch.msgid.link/20251117002452.4068692-1-fujita.tomonori@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add Rust version of pr_[emerg|alert|crit|err|warn|notice|info]_once
macros, which print a message only once.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Link: https://patch.msgid.link/20251117002452.4068692-3-fujita.tomonori@gmail.com
[ Added prefix to title. Fixed typo. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Make warn_on() support DEBUG_BUGVERBOSE_DETAILED option, which was
introduced by the commit aec58b4851 ("bugs/core: Extend
__WARN_FLAGS() with the 'cond_str' parameter").
When the option is enabled, WARN splats now show the evaluated
warn_on() condition alongside the file path, e.g.:
------------[ cut here ]------------
WARNING: [val == 1] linux/samples/rust/rust_minimal.rs:27 at _RNvXCsk7t4azzUqHP_12rust_minimalNtB2_11RustMinimalNtCs8pcx3n4
Modules linked in: rust_minimal(+)
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260108013350.2880613-1-fujita.tomonori@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add the Rust equivalent of the kernel's `DO_ONCE_LITE` macro. While it
would be possible to implement the feature entirely as a Rust macro,
the functionality that can be implemented as regular functions has
been extracted and implemented as the `OnceLite` struct for better
code maintainability.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20251117002452.4068692-2-fujita.tomonori@gmail.com
[ Added prefix to title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The wrapping key does not exist by default and is generated by the
hypervisor as a part of PKWM initialization. This key is then persisted by
the hypervisor and is used to wrap trusted keys. These are variable length
symmetric keys, which in the case of PowerVM Key Wrapping Module (PKWM) are
generated using the kernel RNG. PKWM can be used as a trust source through
the following example keyctl commands:
keyctl add trusted my_trusted_key "new 32" @u
Use the wrap_flags command option to set the secure boot requirement for
the wrapping request through the following keyctl commands
case1: no secure boot requirement. (default)
keyctl usage: keyctl add trusted my_trusted_key "new 32" @u
OR
keyctl add trusted my_trusted_key "new 32 wrap_flags=0x00" @u
case2: secure boot required to in either audit or enforce mode. set bit 0
keyctl usage: keyctl add trusted my_trusted_key "new 32 wrap_flags=0x01" @u
case3: secure boot required to be in enforce mode. set bit 1
keyctl usage: keyctl add trusted my_trusted_key "new 32 wrap_flags=0x02" @u
NOTE:
-> Setting the secure boot requirement is NOT a must.
-> Only either of the secure boot requirement options should be set. Not
both.
-> All the other bits are required to be not set.
-> Set the kernel parameter trusted.source=pkwm to choose PKWM as the
backend for trusted keys implementation.
-> CONFIG_PSERIES_PLPKS must be enabled to build PKWM.
Add PKWM, which is a combination of IBM PowerVM and Power LPAR Platform
KeyStore, as a new trust source for trusted keys.
Signed-off-by: Srish Srinivasan <ssrish@linux.ibm.com>
Tested-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260127145228.48320-6-ssrish@linux.ibm.com
The hypervisor generated wrapping key is an AES-GCM-256 symmetric key which
is stored in a non-volatile, secure, and encrypted storage called the Power
LPAR Platform KeyStore. It has policy based protections that prevent it
from being read out or exposed to the user.
Implement H_PKS_GEN_KEY, H_PKS_WRAP_OBJECT, and H_PKS_UNWRAP_OBJECT HCALLs
to enable using the PowerVM Key Wrapping Module (PKWM) as a new trust
source for trusted keys. Disallow H_PKS_READ_OBJECT, H_PKS_SIGNED_UPDATE,
and H_PKS_WRITE_OBJECT for objects with the 'wrapping key' policy set.
Capture the availability status for the H_PKS_WRAP_OBJECT interface.
Signed-off-by: Srish Srinivasan <ssrish@linux.ibm.com>
Tested-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260127145228.48320-5-ssrish@linux.ibm.com
Starting with Power11, PowerVM supports a new feature called "Key Wrapping"
that protects user secrets by wrapping them using a hypervisor generated
wrapping key. The status of this feature can be read by the
H_PKS_GET_CONFIG HCALL.
Expose the Power LPAR Platform KeyStore (PLPKS) wrapping features config
via the sysfs file /sys/firmware/plpks/config/wrapping_features.
Signed-off-by: Srish Srinivasan <ssrish@linux.ibm.com>
Tested-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260127145228.48320-4-ssrish@linux.ibm.com
The /sys/firmware/secvar/config directory represents Power LPAR Platform
KeyStore (PLPKS) configuration properties such as max_object_size, signed_
update_algorithms, supported_policies, total_size, used_space, and version.
These attributes describe the PLPKS, and not the secure boot variables
(secvars).
Create /sys/firmware/plpks directory and move the PLPKS config inside this
directory. For backwards compatibility, create a soft link from the secvar
sysfs directory to this config and emit a warning stating that the older
sysfs path has been deprecated. Separate out the plpks specific
documentation from secvar.
Signed-off-by: Srish Srinivasan <ssrish@linux.ibm.com>
Tested-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260127145228.48320-3-ssrish@linux.ibm.com
Fix issues with comments for all the applicable functions to be
consistent with kernel-doc format. Move them before the function
definition as opposed to the function prototype.
Signed-off-by: Srish Srinivasan <ssrish@linux.ibm.com>
Tested-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260127145228.48320-2-ssrish@linux.ibm.com
Bhargava Marreddy says:
====================
bng_en: enhancements for RX and TX datapath
This series enhances the bng_en driver by adding:
1. Tx support (standard + TSO)
2. Rx support (standard + LRO/TPA)
====================
Link: https://patch.msgid.link/20260128185623.26559-1-bhargava.marreddy@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable TPA functionality in the VNIC and add functions
to handle TPA events, which help in processing LRO/GRO.
Signed-off-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Link: https://patch.msgid.link/20260128185623.26559-9-bhargava.marreddy@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add AGG event handling in the RX path to receive packet data
on AGG rings. This enables Jumbo and HDS functionality.
Signed-off-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Link: https://patch.msgid.link/20260128185623.26559-7-bhargava.marreddy@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add functions to support xmit along with TSO/GSO.
Also, add functions to handle TX completion events in the NAPI context.
This commit introduces the fundamental transmit data path
Signed-off-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Reviewed-by: Ajit Kumar Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Rahul Gupta <rahul-rg.gupta@broadcom.com>
Link: https://patch.msgid.link/20260128185623.26559-5-bhargava.marreddy@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since the HWRM completion for a sent request lands on the NQ,
add functions to handle the HWRM completion event.
Signed-off-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Link: https://patch.msgid.link/20260128185623.26559-4-bhargava.marreddy@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support to receive packet using NAPI, build and deliver the skb
to stack. With help of meta data available in completions, fill the
appropriate information in skb.
Signed-off-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Reviewed-by: Ajit Kumar Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Rahul Gupta <rahul-rg.gupta@broadcom.com>
Link: https://patch.msgid.link/20260128185623.26559-3-bhargava.marreddy@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The IRQ handler extracts if_id from the upper 16 bits of the hardware
status register and uses it to index into ethsw->ports[] without
validation. Since if_id can be any 16-bit value (0-65535) but the ports
array is only allocated with sw_attr.num_ifs elements, this can lead to
an out-of-bounds read potentially.
Add a bounds check before accessing the array, consistent with the
existing validation in dpaa2_switch_rx().
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Reported-by: Junrui Luo <moonafterrain@outlook.com>
Fixes: 24ab724f8a ("dpaa2-switch: use the port index in the IRQ handler")
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Link: https://patch.msgid.link/SYBPR01MB7881D420AB43FF1A227B84AFAF91A@SYBPR01MB7881.ausprd01.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to Lantech 8330-262D-E, the Lantech 8330-265D also reports
2500MBd instead of 3125MBd.
Also, all 8330-265D report normal RX_LOS in EEPROM, but some signal
inverted RX_LOS. We therefore need to ignore RX_LOS on these modules.
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://patch.msgid.link/20260128170044.15576-1-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch updates the count_eot calculation for CN20K devices.
Where the count_eot feild extended to 2 bits, while maintaining
CN10K compatibility where only bit 0 is used.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260128022448.4402-1-gakula@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Zilin Guan says:
====================
net: liquidio: Fix memory leaks in setup_nic_devices()
This series fixes memory leaks in the initialization paths of the
NIC devices.
Patch 1 moves the initialization of oct->props[i].netdev before queue
setup calls. This ensures that if queue setup fails, the cleanup function
can find and free the allocated netdev. It also initializes lio->oct_dev
early to prevent a crash in the cleanup path.
Patch 2 fixes an off-by-one error in the PF cleanup loop. It ensures
the current device index is cleaned up and correctly handles the
post-loop devlink_alloc failure case.
Patch 3 fixes the same off-by-one error in the VF cleanup loop.
====================
Link: https://patch.msgid.link/20260128154440.278369-1-zilin@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In setup_nic_devices(), the initialization loop jumps to the label
setup_nic_dev_free on failure. The current cleanup loop while(i--)
skip the failing index i, causing a memory leak.
Fix this by changing the loop to iterate from the current index i
down to 0.
Compile tested only. Issue found using code review.
Fixes: 846b46873e ("liquidio CN23XX: VF offload features")
Suggested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260128154440.278369-4-zilin@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In setup_nic_devices(), the initialization loop jumps to the label
setup_nic_dev_free on failure. The current cleanup loop while(i--)
skip the failing index i, causing a memory leak.
Fix this by changing the loop to iterate from the current index i
down to 0.
Also, decrement i in the devlink_alloc failure path to point to the
last successfully allocated index.
Compile tested only. Issue found using code review.
Fixes: f21fb3ed36 ("Add support of Cavium Liquidio ethernet adapters")
Suggested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260128154440.278369-3-zilin@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In setup_nic_devices(), the netdev is allocated using alloc_etherdev_mq().
However, the pointer to this structure is stored in oct->props[i].netdev
only after the calls to netif_set_real_num_rx_queues() and
netif_set_real_num_tx_queues().
If either of these functions fails, setup_nic_devices() returns an error
without freeing the allocated netdev. Since oct->props[i].netdev is still
NULL at this point, the cleanup function liquidio_destroy_nic_device()
will fail to find and free the netdev, resulting in a memory leak.
Fix this by initializing oct->props[i].netdev before calling the queue
setup functions. This ensures that the netdev is properly accessible for
cleanup in case of errors.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: c33c997346 ("liquidio: enhanced ethtool --set-channels feature")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260128154440.278369-2-zilin@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- cfg80211/mac80211
- most of EPPKE/802.1X over auth frames support
- additional FTM capabilities
- split up drop reasons better, removing generic RX_DROP
- NAN cleanups/fixes
- ath11k:
- support for Channel Frequency Response measurement
- ath12k:
- support for the QCC2072 chipset
- iwlwifi:
- partial NAN support
- UNII-9 support
- some UHR/802.11bn FW APIs
- remove most of MLO/EHT from iwlmvm
(such devices use iwlmld)
- rtw89:
- preparations for RTL8922DE support
-----BEGIN PGP SIGNATURE-----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=70Rs
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2026-01-29' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Another fairly large set of changes, notably:
- cfg80211/mac80211
- most of EPPKE/802.1X over auth frames support
- additional FTM capabilities
- split up drop reasons better, removing generic RX_DROP
- NAN cleanups/fixes
- ath11k:
- support for Channel Frequency Response measurement
- ath12k:
- support for the QCC2072 chipset
- iwlwifi:
- partial NAN support
- UNII-9 support
- some UHR/802.11bn FW APIs
- remove most of MLO/EHT from iwlmvm
(such devices use iwlmld)
- rtw89:
- preparations for RTL8922DE support
* tag 'wireless-next-2026-01-29' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (184 commits)
wifi: iwlegacy: add missing mutex protection in il4965_store_tx_power()
wifi: iwlegacy: add missing mutex protection in il3945_store_measurement()
wifi: mac80211: use u64_stats_t with u64_stats_sync properly
wifi: p54: Fix memory leak in p54_beacon_update()
wifi: cfg80211: treat deprecated INDOOR_SP_AP_OLD control value as LPI mode
wifi: rtw88: sdio: Migrate to use sdio specific shutdown function
wifi: rsi: sdio: Migrate to use sdio specific shutdown function
sdio: Provide a bustype shutdown function
wifi: nl80211/cfg80211: support operating as RSTA in PMSR FTM request
wifi: nl80211/cfg80211: add negotiated burst period to FTM result
wifi: nl80211/cfg80211: clarify periodic FTM parameters for non-EDCA based ranging
wifi: nl80211/cfg80211: add new FTM capabilities
wifi: iwlwifi: rename struct iwl_mcc_allowed_ap_type_cmd::offset_map
wifi: iwlwifi: mvm: Remove link_id from time_events
wifi: iwlwifi: mld: change cluster_id type to u8 array
wifi: iwlwifi: support V13 of iwl_lari_config_change_cmd
wifi: iwlwifi: split bios_value_u32 to separate the header
wifi: iwlwifi: uefi: cache the DSM functions
wifi: iwlwifi: acpi: cache the DSM functions
wifi: iwlwifi: mvm: Cleanup MLO code
...
====================
Link: https://patch.msgid.link/20260129110136.176980-39-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bjørn Mork says:
====================
Airoha AN8811HB 2.5 Gbps phy support
The RFC patch posted earlier has been split into a series based on the
feedback received:
1/3: preparing the EN8811H driver for maximum reuse
2/3: adding support for the new AN8811HB hardware
3/3: adding (optional) clock driver for AN8811HB
Patch 3/3 is not required for a functional device. It is included here
for full feature parity between the EN8811H and AN8811HB drivers.
The AN8811HB phy requires new firmware, which is now available with
the 20260110 release of linux-firmware,
====================
Link: https://patch.msgid.link/20260127125547.1475164-1-bjorn@mork.no
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement clk provider driver so we can disable the clock output when it
isn't needed. This helps to reduce EMF noise
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Link: https://patch.msgid.link/20260127125547.1475164-4-bjorn@mork.no
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Airoha AN8811HB is mostly compatible with the EN8811H, adding 10Base-T
support and reducing power consumption.
This driver is based on the air_an8811hb v0.0.4 out-of-tree driver
written by "Lucien.Jheng <lucien.jheng@airoha.com>"
Firmware is available in linux-firmware. The driver has been tested with
firmware version 25110702
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Link: https://patch.msgid.link/20260127125547.1475164-3-bjorn@mork.no
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
refcounting conversions, and one for the bridge connector following the
HDMI audio reworks.
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQTkHFbLp4ejekA/qfgnX84Zoj2+dgUCaXshIgAKCRAnX84Zoj2+
diDDAXwJM6Hh0WJL3timIT9gfktjx+lAYPK2hOFhxAvw0rjg2LeDnS40U5X5222j
8fP781YBf0jpvWD2K8QXRIZTCG5JSUYiYnz9aM61x7wJ9k3zpMqLCjPsy8jsm+iS
/O2caHj0bw==
=z19u
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-fixes-2026-01-29' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
Two fixes for NULL pointer dereference in imx8 following the bridge
refcounting conversions, and one for the bridge connector following the
HDMI audio reworks.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patch.msgid.link/20260129-efficient-jerboa-of-ecstasy-822832@houat
Commit 1ceeedb597 ("ublk: optimize UBLK_IO_UNREGISTER_IO_BUF on daemon
task") optimized ublk request buffer unregistration to use a non-atomic
reference count decrement when performed on the ublk_io's daemon task.
The optimization applied to auto buffer unregistration, which happens as
part of handling UBLK_IO_COMMIT_AND_FETCH_REQ on the daemon task.
However, commit b749965edd ("ublk: remove ublk_commit_and_fetch()")
reordered the ublk_sub_req_ref() for the completed request before the
io_buffer_unregister_bvec() call. As a result, task_registered_buffers
is already 0 when io_buffer_unregister_bvec() calls ublk_io_release()
and the non-atomic refcount optimization doesn't apply.
Move the io_buffer_unregister_bvec() call back to before
ublk_need_complete_req() to restore the reference counting optimization.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Fixes: b749965edd ("ublk: remove ublk_commit_and_fetch()")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The driver now depends on the core to tell it what the rx page size
should be for the agg ring. We must populate the ndo_default_qcfg
callback even if we don't support any queue ops.
This fixes:
Oops: divide error: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN
RIP: 0010:bnxt_alloc_rx_page_pool (drivers/net/ethernet/broadcom/bnxt/bnxt.c:3852)
with fw version 225.1.109.0.
Link: https://lore.kernel.org/20250421222827.283737-20-kuba@kernel.org
Fixes: f96e1b3577 ("eth: bnxt: support qcfg provided rx page size")
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260128193258.125274-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fan Gong says:
====================
net: hinic3: Fix code styles
This patchset provides 4 code styles fixes:
Remove empty lines between error handling.
Remove defensive txq_num check.
Use array_size instead of multiplying.
SQ use SQ_CTXT_PREF_CI_HI to improve readability.
====================
Link: https://patch.msgid.link/cover.1769656467.git.zhuyikai1@h-partners.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of using generic workqueue, use a dedicated kthread for optimizing
kprobes, because it can wait (sleep) for a long time inside the process
by synchronize_rcu_task(). This means other works can be stopped until it
finishes.
Link: https://lore.kernel.org/all/176970170302.114949.5175231591310436910.stgit@devnote2/
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
fl6_update_dst() is called for every TCP (and others) transmit,
and is a nop for common cases.
Split it in two parts :
1) fl6_update_dst() inline helper, small and fast.
2) __fl6_update_dst() for the exception, out of line.
Small size increase to get better TX performance.
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 2/2 grow/shrink: 8/0 up/down: 296/-125 (171)
Function old new delta
__fl6_update_dst - 104 +104
rawv6_sendmsg 2244 2284 +40
udpv6_sendmsg 3013 3043 +30
tcp_v6_connect 1514 1534 +20
cookie_v6_check 1501 1519 +18
ip6_datagram_dst_update 673 690 +17
inet6_sk_rebuild_header 499 516 +17
inet6_csk_route_socket 507 524 +17
inet6_csk_route_req 343 360 +17
__pfx___fl6_update_dst - 16 +16
__pfx_fl6_update_dst 16 - -16
fl6_update_dst 109 - -109
Total: Before=22570304, After=22570475, chg +0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260128185548.3738781-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
NIX SQ manager sticky mode is known to cause stalls when multiple SQs
share an SMQ and transmit concurrently. Additionally, PSE may deadlock
on transitions between sticky and non-sticky transmissions. There is
also a credit drop issue observed when certain condition clocks are
gated.
work around these hardware errata by:
- Disabling SQM sticky operation:
- Clear TM6 (bit 15)
- Clear TM11 (bit 14)
- Disabling sticky → non-sticky transition path that can deadlock PSE:
- Clear TM5 (bit 23)
- Preventing credit drops by keeping the control-flow clock enabled:
- Set TM9 (bit 21)
These changes are applied via NIX_AF_SQM_DBG_CTL_STATUS. With this
configuration the SQM/PSE maintain forward progress under load without
credit loss, at the cost of disabling sticky optimizations.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260127125147.1642-1-gakula@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test_rss_flow_label_6only test case fails on devices that do not
support IPv6 flow label hashing. Make it skip neatly, consistent with
the behavior of the test_rss_flow_label case.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Nimrod Oren <noren@nvidia.com>
Link: https://patch.msgid.link/20260128090217.663366-1-noren@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver allocates arrays for ports, FDBs, and filter blocks using
kcalloc() with ethsw->sw_attr.num_ifs as the element count. When the
device reports zero interfaces (either due to hardware configuration
or firmware issues), kcalloc(0, ...) returns ZERO_SIZE_PTR (0x10)
instead of NULL.
Later in dpaa2_switch_probe(), the NAPI initialization unconditionally
accesses ethsw->ports[0]->netdev, which attempts to dereference
ZERO_SIZE_PTR (address 0x10), resulting in a kernel panic.
Add a check to ensure num_ifs is greater than zero after retrieving
device attributes. This prevents the zero-sized allocations and
subsequent invalid pointer dereference.
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Reported-by: Junrui Luo <moonafterrain@outlook.com>
Fixes: 0b1b713704 ("staging: dpaa2-switch: handle Rx path on control interface")
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/SYBPR01MB7881BEABA8DA896947962470AF91A@SYBPR01MB7881.ausprd01.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: stmmac: rk: second chunk of cleanups
This series is a cut-down installment of the dwmac-rk cleanups, covering
up to the point that the AI review had its first issue with the patches.
Unfortunately, this means that we introduce ->init but do not add any
users for it yet. That will be in the next round once this has got
through AI review and merged.
====================
Link: https://patch.msgid.link/aXnrzIbZN-gaZTia@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All the definitions of the RGMII related xxx_GMAC_CLK_xxx definitions
use the same field values to select the clock rate. Provide common
definitions for these field values, passing them in to a single macro
for each variant that generates the appropriate values for the speed
register.
No change to produced code on aarch64.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1vl3G0-00000006v3R-2ZBc@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rk_gmac_setup() delves into the PHY's DT node to retrieve its reset
control using of_reset_control_get(). However, it never releases it
when the driver is removed. Add reset_control_put() to rk_gmac_exit()
to clean this up.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patch.msgid.link/E1vl3Fv-00000006v3L-215v@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
