Model the optional external audio clock inputs as CPG input clocks for
RZ/V2H family SoCs (RZ/V2H, RZ/V2N, RZ/G3E), allowing the Audio Clock
Generator (ADG) to derive internal audio clocks from these external
sources.
The clock frequencies are board-specific and must be overridden in the
board DTS files.
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260525110603.4018170-4-john.madieu.xa@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The DBSC5 DRAM controller protects DRAM content using inline ECC.
The inline ECC utilizes areas of DRAM for its operation, which are
in the DRAM address range, but must not be accessed or modified.
Describe the inline ECC carveout areas used by the DBSC5 controller
on this hardware as reserved-memory, which must not be accessed.
Include DRAM areas which are unprotected by ECC as well, those are
parts of the DRAM which directly precede the ECC carveout.
In case of high DRAM utilization, unless the inline ECC carveouts
are properly reserved, Linux may use and corrupt the memory used
by the DBSC5 DRAM controller for inline ECC, which would lead to
the system becoming unstable.
Fixes: ad142a4ef7 ("arm64: dts: renesas: r8a78000: Add initial Ironhide board support")
Cc: stable@vger.kernel.org
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260710160450.64967-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add node for iMX8MQ Display Controller Subsystem.
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Esben Haabendal <esben@geanix.com>
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add PDM microphone sound card support, configure the pinmux.
This sound card supports recording sound from PDM microphone and
convert the PDM format data to PCM data.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
The board uses GPIO-controlled muxes to route shared signals between
different functions.
Add the audio-related mux states for:
- selecting PDM or CAN1
- selecting SAI1 or M.2
- enabling the SAI1 audio path or not
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
TQMa91 has a 512MiB RAM variant for which the edgelock memory location
exceeds the valid memory area.
Signed-off-by: Alexander Feilke <Alexander.Feilke@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add samsung,picophy-pre-emp-curr-control and
samsung,picophy-dc-vol-level-adjust using the same values as other
TQ-Systems GmbH mainboards.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
This device is used for 'sound-dai' and needs #sound-dai-cells. dtbs_check
raises a warning regarding sound_dai_property.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add the overlay for the Tianma TM070JVHG33 LVDS display.
Signed-off-by: Martin Schmiedel <Martin.Schmiedel@tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add the overlay for the Tianma TM070JVHG33 LVDS display.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add the overlay for the Tianma TM070JVHG33 LVDS display.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Correct spaces or mix of tabs+spaces into proper tab-indented lines.
No functional impact (same DTB).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Ghennadi Procopciuc <ghennadi.procopciuc@oss.nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Correct spaces or mix of tabs+spaces into proper tab-indented lines and
remove other whitespace violations. No functional impact (same DTB).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Fix the Ethernet PHY description on the DART-MX9 Sonata boards.
The GPIO previously described as the PHY reset line is actually a
board-level enable signal required by the PHY. Model it accordingly and
remove the incorrect reset GPIO description from the PHY nodes.
On i.MX91 and i.MX93 the signal is described as a fixed regulator,
whereas the existing regulator description on i.MX95 is reused.
Keeping the PHY enable asserted during boot ensures that Ethernet
initialization completes successfully.
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
TQMa6x has board-information located in EEPROM at offset 0x20.
Add necessary nodes and properties for nvmem cell.
Signed-off-by: Max Merchel <Max.Merchel@ew.tq-group.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
TQMa6UL has board-information located in EEPROM at offset 0x20.
Add necessary nodes and properties for nvmem cell.
Signed-off-by: Max Merchel <Max.Merchel@ew.tq-group.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add maintainers entry for the Samsung Exynos8855 SoC based platforms
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://patch.msgid.link/20260627171228.2687857-7-alim.akhtar@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The board consists of a CLRV1126F core module and a DLRV1126 carrier
board. The core module contains the RV1126 SoC, eMMC and RK809 PMIC,
while the carrier board provides Ethernet, SD card, AP6212 WiFi and
Bluetooth, PCF8563 RTC, ADC keys, GPIO LEDs and audio connectors.
The board has been tested with Ethernet/NFS boot, eMMC, SD card, SDIO
WiFi enumeration, Bluetooth LE scanning, RTC, ADC keys, GPIO LEDs and
RK809 audio card registration.
Signed-off-by: Yanan He <grumpycat921013@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch> #gmac and mdio nodes
Link: https://patch.msgid.link/20260706-rv1126-alientek-dlrv1126-v2-5-ff3176ca362b@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The board consists of a DLRV1126 carrier board and a CLRV1126F core
module based on the Rockchip RV1126 SoC.
Signed-off-by: Yanan He <grumpycat921013@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260706-rv1126-alientek-dlrv1126-v2-2-ff3176ca362b@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This board contains an EEPROM that holds the CPU serial number and
ethernet MAC. It is used by U-boot when configuring the device tree
for the Linux kernel.
Signed-off-by: Marius Dinu <m95d+git@psihoexpert.ro>
Link: https://patch.msgid.link/20260703084645.7001-1-m95d+git@psihoexpert.ro
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add device tree bindings for the camera clock controller on
Qualcomm Glymur SoC.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Jagadeesh Kona <jagadeesh.kona@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260624-glymur_camcc-v5-1-a321df74b1a1@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the device tree node of SDHCI-0 controller which found on CoM260-IFX
board, it's currenty used for Micro SD card slot, and one GPIO pin is
configured as card insertion/removal detection pin, the slot use 4-bit
data bus, and up support to SDR104 speed mode.
Link: https://patch.msgid.link/20260610-07-k3-enable-sd-v1-1-196ae29bd091@kernel.org
Signed-off-by: Yixun Lan <dlan@kernel.org>
"usbh0_id" and "usbh1_id" properties were never documented and never
used by Linux drivers, thus should be safe to drop to fix dtbs_check
warnings like:
st/spear1310-evb.dtb: usb@e4800000 (st,spear600-ehci): Unevaluated properties are not allowed ('usbh0_id' was unexpected)
st/spear1310-evb.dtb: usb@e5800000 (st,spear600-ehci): Unevaluated properties are not allowed ('usbh1_id' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20260625091355.107054-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This SoC has a DMA controller (AP_DMA) that provides one channel
for each data direction (transmit and receive) for all of the
UART controllers in the SoC.
In order to increase the efficiency of data TX/RX over the UART
controllers, add the UART DMA controller and assign the right
channels to each uart controller.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
This SoC has a DMA controller (AP_DMA) that provides one channel
for each data direction (transmit and receive) for all of the
UART controllers in the SoC.
In order to increase the efficiency of data TX/RX over the UART
controllers, add the UART DMA controller and assign the right
channels to its two uart controllers.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
This SoC has a DMA controller (AP_DMA) that provides one channel
for each data direction (transmit and receive) for all of the
UART controllers in the SoC.
In order to increase the efficiency of data TX/RX over the UART
controllers, add the UART DMA controller and assign the right
channels to each of the four UART controllers that are declared.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
This SoC has a DMA controller (AP_DMA) that provides one channel
for each data direction (transmit and receive) for all of the
UART controllers in the SoC.
In order to increase the efficiency of data TX/RX over the UART
controllers, add the UART DMA controller and assign the right
channels to each of the three UART controllers.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
This SoC has a DMA controller (AP_DMA) that provides one channel
for each data direction (transmit and receive) for all of the
UART controllers in the SoC.
In order to increase the efficiency of data TX/RX over the UART
controllers, add the UART DMA controller and assign the right
channels to each of the three UART controllers.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Remove the mediatek,dma-33bits property as it is now deprecated
and, while at it, also remove the fallback compatible as it was
not entirely right to use anyway, because this IP is not fully
compatible with the one found in MT6577 and would create more
issues than the ones it could resolve (as in - it's better to
not probe the controller than to probe it and manage it in some
incorrect way).
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Remove unnecessary address and size cells from both the disp_dsi0
and the xhci2's ethernet usb device subnode to fix a dtbs_check
warning for avoid_unnecessary_addr_size.
Fixes: 9fda4a8a47 ("arm64: dts: mediatek: add device tree for Tungsten 510 board")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Introduce a passive polling delay to ensure more than one
"passive" thermal point is considered when throttling the GPU
thermal zone.
Signed-off-by: Haritha S K <haritha.k@oss.qualcomm.com>
Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260505-qcs615_gpu_cooling-v2-1-1ba42260b29d@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Initial device tree for Microsoft Surface Pro 12in
Currently supported:
- UFS
- Touchscreen
- Pen
- USB 3.2 x2 (DP Alt Mode)
- Audio
- Wifi
- Bluetooth
- CDSP
- ADSP
- GPU
Not currently supported:
- Accelerometer
- Front, Back and IR cameras
- IRIS video decoder
Tested on Surface_Pro_12in_1st_Ed_with_Snapdragon_2110
Signed-off-by: Harrison Vanderbyl <harrison.vanderbyl@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260609145906.40854-2-harrison.vanderbyl@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
monaco-arduino-monza.dts includes monaco-monza-som.dtsi, which aleady
includes monaco.dtsi and monaco-pmics.dtsi. Remove the duplicates.
The resulting DTB file is identical.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260617-topic-monza_includes-v1-1-fcef9ce489fb@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Xiaomi 12 Lite 5G is a handset released in 2022
This commit has the following features working:
- Display (with simple fb)
- Touchscreen
- UFS
- Power and volume buttons
- Pinctrl
- RPM Regulators
- Remoteprocs - wifi, bluetooth
- USB (Device Mode)
Signed-off-by: Stanislav Zaikin <zstaseg@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260608143329.252033-3-zstaseg@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Xiaomi 12 Lite 5G (xiaomi,taoyao) is a smartphone based on the SM7325
SoC.
Signed-off-by: Stanislav Zaikin <zstaseg@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260608143329.252033-2-zstaseg@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable GPU for talos-evk-som platform and provide path for zap
shader.
Signed-off-by: Jie Zhang <jie.zhang@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260427-talos-evt-gpu-v1-1-d40b6dffa108@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On KODIAK platforms boot can fail when the DT "adsp-rpc-remote-heap"
reserved-memory region overlaps with firmware allocations (UEFI/EFI
runtime). The kernel then reports failure to reserve the region and
subsequent EFI runtime activity may trigger aborts.
The remote heap node was described as a fixed "no-map" region, which
turns it into a hard carveout. Replace it with a "shared-dma-pool"
reserved memory region with reusable CMA-backed allocation, specifying
alignment and size.
This avoids hard carveouts and reduces the chance of conflicting with
firmware memory maps while keeping an explicit pool for ADSP remote
heap usage.
Fixes: 90a58ffa9c ("arm64: dts: qcom: kodiak: Add memory region for audiopd")
Cc: stable@kernel.org
Signed-off-by: Jianping Li <jianping.li@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260429073443.2027-1-jianping.li@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
SD card is detected as SDHS instead of UHS-I because sdhc_2 was
configured with vreg_s4a as vqmmc-supply, which cannot switch
between 1.8V and 3.3V.
Switch vqmmc-supply to vreg_l2a and update its voltage range to
1800000-2960000 uV to enable proper UHS-I signaling.
Signed-off-by: Monish Chunara <monish.chunara@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260522105020.3588377-1-mchunara@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Describe and wire up the power supplies for the eDP panel and its
backlight. Previously, this was only working because of settings
inherited from the bootloader.
Fixes: 20dea72a39 ("arm64: dts: qcom: sc8180x: Introduce Lenovo Flex 5G")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260616-topic-8180_disp_power-v2-4-167785993231@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Align with the contemporary way of naming regulator nodes (regulator-
prefix) in preparation for adding more of them.
Reorder the renamed entries to match the expectations of the DT coding
style doc.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260616-topic-8180_disp_power-v2-3-167785993231@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Describe and wire up the power supplies for the eDP panel and its
backlight. Previously, this was only working because of settings
inherited from the bootloader.
Fixes: 2ce38cc1e8 ("arm64: dts: qcom: sc8180x: Introduce Primus")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260616-topic-8180_disp_power-v2-2-167785993231@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
