On POWER9, when userspace reads the value of the DPDES register on a
vCPU, it is possible for 0 to be returned although there is a doorbell
interrupt pending for the vCPU. This can lead to a doorbell interrupt
being lost across migration. If the guest kernel uses doorbell
interrupts for IPIs, then it could malfunction because of the lost
interrupt.
This happens because a newly-generated doorbell interrupt is signalled
by setting vcpu->arch.doorbell_request to 1; the DPDES value in
vcpu->arch.vcore->dpdes is not updated, because it can only be updated
when holding the vcpu mutex, in order to avoid races.
To fix this, we OR in vcpu->arch.doorbell_request when reading the
DPDES value.
Cc: stable@vger.kernel.org # v4.13+
Fixes: 579006944e ("KVM: PPC: Book3S HV: Virtualize doorbell facility on POWER9")
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
When we are running multiple vcores on the same physical core, they
could be from different VMs and so it is possible that one of the
VMs could have its arch.mmu_ready flag cleared (for example by a
concurrent HPT resize) when we go to run it on a physical core.
We currently check the arch.mmu_ready flag for the primary vcore
but not the flags for the other vcores that will be run alongside
it. This adds that check, and also a check when we select the
secondary vcores from the preempted vcores list.
Cc: stable@vger.kernel.org # v4.14+
Fixes: 38c53af853 ("KVM: PPC: Book3S HV: Fix exclusion between HPT resizing and other HPT updates")
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
There are some POWER9 machines where the OPAL firmware does not support
the OPAL_XIVE_GET_QUEUE_STATE and OPAL_XIVE_SET_QUEUE_STATE calls.
The impact of this is that a guest using XIVE natively will not be able
to be migrated successfully. On the source side, the get_attr operation
on the KVM native device for the KVM_DEV_XIVE_GRP_EQ_CONFIG attribute
will fail; on the destination side, the set_attr operation for the same
attribute will fail.
This adds tests for the existence of the OPAL get/set queue state
functions, and if they are not supported, the XIVE-native KVM device
is not created and the KVM_CAP_PPC_IRQ_XIVE capability returns false.
Userspace can then either provide a software emulation of XIVE, or
else tell the guest that it does not have a XIVE controller available
to it.
Cc: stable@vger.kernel.org # v5.2+
Fixes: 3fab2d1058 ("KVM: PPC: Book3S HV: XIVE: Activate XIVE exploitation mode")
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The rmap array in the guest memslot is an array of size number of guest
pages, allocated at memslot creation time. Each rmap entry in this array
is used to store information about the guest page to which it
corresponds. For example for a hpt guest it is used to store a lock bit,
rc bits, a present bit and the index of a hpt entry in the guest hpt
which maps this page. For a radix guest which is running nested guests
it is used to store a pointer to a linked list of nested rmap entries
which store the nested guest physical address which maps this guest
address and for which there is a pte in the shadow page table.
As there are currently two uses for the rmap array, and the potential
for this to expand to more in the future, define a type field (being the
top 8 bits of the rmap entry) to be used to define the type of the rmap
entry which is currently present and define two values for this field
for the two current uses of the rmap array.
Since the nested case uses the rmap entry to store a pointer, define
this type as having the two high bits set as is expected for a pointer.
Define the hpt entry type as having bit 56 set (bit 7 IBM bit ordering).
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Fix the error below triggered by `-Wimplicit-fallthrough`, by tagging
it as an expected fall-through.
arch/powerpc/kvm/book3s_32_mmu.c: In function ‘kvmppc_mmu_book3s_32_xlate_pte’:
arch/powerpc/kvm/book3s_32_mmu.c:241:21: error: this statement may fall through [-Werror=implicit-fallthrough=]
pte->may_write = true;
~~~~~~~~~~~~~~~^~~~~~
arch/powerpc/kvm/book3s_32_mmu.c:242:5: note: here
case 3:
^~~~
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
This merges in fixes for the XIVE interrupt controller which touch both
generic powerpc and PPC KVM code. To avoid merge conflicts, these
commits will go upstream via the powerpc tree as well as the KVM tree.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Testing has revealed the existence of a race condition where a XIVE
interrupt being shut down can be in one of the XIVE interrupt queues
(of which there are up to 8 per CPU, one for each priority) at the
point where free_irq() is called. If this happens, can return an
interrupt number which has been shut down. This can lead to various
symptoms:
- irq_to_desc(irq) can be NULL. In this case, no end-of-interrupt
function gets called, resulting in the CPU's elevated interrupt
priority (numerically lowered CPPR) never gets reset. That then
means that the CPU stops processing interrupts, causing device
timeouts and other errors in various device drivers.
- The irq descriptor or related data structures can be in the process
of being freed as the interrupt code is using them. This typically
leads to crashes due to bad pointer dereferences.
This race is basically what commit 62e0468650 ("genirq: Add optional
hardware synchronization for shutdown", 2019-06-28) is intended to
fix, given a get_irqchip_state() method for the interrupt controller
being used. It works by polling the interrupt controller when an
interrupt is being freed until the controller says it is not pending.
With XIVE, the PQ bits of the interrupt source indicate the state of
the interrupt source, and in particular the P bit goes from 0 to 1 at
the point where the hardware writes an entry into the interrupt queue
that this interrupt is directed towards. Normally, the code will then
process the interrupt and do an end-of-interrupt (EOI) operation which
will reset PQ to 00 (assuming another interrupt hasn't been generated
in the meantime). However, there are situations where the code resets
P even though a queue entry exists (for example, by setting PQ to 01,
which disables the interrupt source), and also situations where the
code leaves P at 1 after removing the queue entry (for example, this
is done for escalation interrupts so they cannot fire again until
they are explicitly re-enabled).
The code already has a 'saved_p' flag for the interrupt source which
indicates that a queue entry exists, although it isn't maintained
consistently. This patch adds a 'stale_p' flag to indicate that
P has been left at 1 after processing a queue entry, and adds code
to set and clear saved_p and stale_p as necessary to maintain a
consistent indication of whether a queue entry may or may not exist.
With this, we can implement xive_get_irqchip_state() by looking at
stale_p, saved_p and the ESB PQ bits for the interrupt.
There is some additional code to handle escalation interrupts
properly; because they are enabled and disabled in KVM assembly code,
which does not have access to the xive_irq_data struct for the
escalation interrupt. Hence, stale_p may be incorrect when the
escalation interrupt is freed in kvmppc_xive_{,native_}cleanup_vcpu().
Fortunately, we can fix it up by looking at vcpu->arch.xive_esc_on,
with some careful attention to barriers in order to ensure the correct
result if xive_esc_irq() races with kvmppc_xive_cleanup_vcpu().
Finally, this adds code to make noise on the console (pr_crit and
WARN_ON(1)) if we find an interrupt queue entry for an interrupt
which does not have a descriptor. While this won't catch the race
reliably, if it does get triggered it will be an indication that
the race is occurring and needs to be debugged.
Fixes: 243e25112d ("powerpc/xive: Native exploitation of the XIVE interrupt controller")
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190813100648.GE9567@blackberry
At present, when running a guest on POWER9 using HV KVM but not using
an in-kernel interrupt controller (XICS or XIVE), for example if QEMU
is run with the kernel_irqchip=off option, the guest entry code goes
ahead and tries to load the guest context into the XIVE hardware, even
though no context has been set up.
To fix this, we check that the "CAM word" is non-zero before pushing
it to the hardware. The CAM word is initialized to a non-zero value
in kvmppc_xive_connect_vcpu() and kvmppc_xive_native_connect_vcpu(),
and is now cleared in kvmppc_xive_{,native_}cleanup_vcpu.
Fixes: 5af5099385 ("KVM: PPC: Book3S HV: Native usage of the XIVE interrupt controller")
Cc: stable@vger.kernel.org # v4.12+
Reported-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190813100100.GC9567@blackberry
Escalation interrupts are interrupts sent to the host by the XIVE
hardware when it has an interrupt to deliver to a guest VCPU but that
VCPU is not running anywhere in the system. Hence we disable the
escalation interrupt for the VCPU being run when we enter the guest
and re-enable it when the guest does an H_CEDE hypercall indicating
it is idle.
It is possible that an escalation interrupt gets generated just as we
are entering the guest. In that case the escalation interrupt may be
using a queue entry in one of the interrupt queues, and that queue
entry may not have been processed when the guest exits with an H_CEDE.
The existing entry code detects this situation and does not clear the
vcpu->arch.xive_esc_on flag as an indication that there is a pending
queue entry (if the queue entry gets processed, xive_esc_irq() will
clear the flag). There is a comment in the code saying that if the
flag is still set on H_CEDE, we have to abort the cede rather than
re-enabling the escalation interrupt, lest we end up with two
occurrences of the escalation interrupt in the interrupt queue.
However, the exit code doesn't do that; it aborts the cede in the sense
that vcpu->arch.ceded gets cleared, but it still enables the escalation
interrupt by setting the source's PQ bits to 00. Instead we need to
set the PQ bits to 10, indicating that an interrupt has been triggered.
We also need to avoid setting vcpu->arch.xive_esc_on in this case
(i.e. vcpu->arch.xive_esc_on seen to be set on H_CEDE) because
xive_esc_irq() will run at some point and clear it, and if we race with
that we may end up with an incorrect result (i.e. xive_esc_on set when
the escalation interrupt has just been handled).
It is extremely unlikely that having two queue entries would cause
observable problems; theoretically it could cause queue overflow, but
the CPU would have to have thousands of interrupts targetted to it for
that to be possible. However, this fix will also make it possible to
determine accurately whether there is an unhandled escalation
interrupt in the queue, which will be needed by the following patch.
Fixes: 9b9b13a6d1 ("KVM: PPC: Book3S HV: Keep XIVE escalation interrupt masked unless ceded")
Cc: stable@vger.kernel.org # v4.16+
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190813100349.GD9567@blackberry
When a vCPU is brought done, the XIVE VP (Virtual Processor) is first
disabled and then the event notification queues are freed. When freeing
the queues, we check for possible escalation interrupts and free them
also.
But when a XIVE VP is disabled, the underlying XIVE ENDs also are
disabled in OPAL. When an END (Event Notification Descriptor) is
disabled, its ESB pages (ESn and ESe) are disabled and loads return all
1s. Which means that any access on the ESB page of the escalation
interrupt will return invalid values.
When an interrupt is freed, the shutdown handler computes a 'saved_p'
field from the value returned by a load in xive_do_source_set_mask().
This value is incorrect for escalation interrupts for the reason
described above.
This has no impact on Linux/KVM today because we don't make use of it
but we will introduce in future changes a xive_get_irqchip_state()
handler. This handler will use the 'saved_p' field to return the state
of an interrupt and 'saved_p' being incorrect, softlockup will occur.
Fix the vCPU cleanup sequence by first freeing the escalation interrupts
if any, then disable the XIVE VP and last free the queues.
Fixes: 90c73795af ("KVM: PPC: Book3S HV: Add a new KVM device for the XIVE native exploitation mode")
Fixes: 5af5099385 ("KVM: PPC: Book3S HV: Native usage of the XIVE interrupt controller")
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190806172538.5087-1-clg@kaod.org
Here are some small SPDX fixes for 5.3-rc2 for things that came in
during the 5.3-rc1 merge window that we previously missed.
Only 3 small patches here:
- 2 uapi patches to resolve some SPDX tags that were not correct
- fix an invalid SPDX tag in the iomap Makefile file
All have been properly reviewed on the public mailing lists.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXT2N9w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylY9wCeJIYfs/eNf3tsjLQXxUBMYAJNqnsAn2IaMiTt
cv2mck7JZm5KyHpP3f5N
=RSZa
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX fixes from Greg KH:
"Here are some small SPDX fixes for 5.3-rc2 for things that came in
during the 5.3-rc1 merge window that we previously missed.
Only three small patches here:
- two uapi patches to resolve some SPDX tags that were not correct
- fix an invalid SPDX tag in the iomap Makefile file
All have been properly reviewed on the public mailing lists"
* tag 'spdx-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
iomap: fix Invalid License ID
treewide: remove SPDX "WITH Linux-syscall-note" from kernel-space headers again
treewide: add "WITH Linux-syscall-note" to SPDX tag of uapi headers
Here's the first batch of fixes for this release cycle.
Main diffstat here is the re-deletion of netx. I messed up and most
likely didn't remove the files from the index when I test-merged this
and saw conflicts, and from there on out 'git rerere' remembered the
mistake and I missed checking it. Here it's done again as expected.
Besides that:
- A defconfig refresh + enabling of new drivers for u8500
- i.MX fixlets for i2c/SAI/pinmux
- sleep.S build fix for Davinci
- Broadcom devicetree build/warning fix
-----BEGIN PGP SIGNATURE-----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=IReR
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Olof Johansson:
"Here's the first batch of fixes for this release cycle.
Main diffstat here is the re-deletion of netx. I messed up and most
likely didn't remove the files from the index when I test-merged this
and saw conflicts, and from there on out 'git rerere' remembered the
mistake and I missed checking it. Here it's done again as expected.
Besides that:
- A defconfig refresh + enabling of new drivers for u8500
- i.MX fixlets for i2c/SAI/pinmux
- sleep.S build fix for Davinci
- Broadcom devicetree build/warning fix"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: defconfig: u8500: Add new drivers
ARM: defconfig: u8500: Refresh defconfig
ARM: dts: bcm: bcm47094: add missing #cells for mdio-bus-mux
ARM: davinci: fix sleep.S build error on ARMv4
arm64: dts: imx8mq: fix SAI compatible
arm64: dts: imx8mm: Correct SAI3 RXC/TXFS pin's mux option #1
ARM: dts: imx6ul: fix clock frequency property name of I2C buses
ARM: Delete netx a second time
ARM: dts: imx7ulp: Fix usb-phy unit address format
Pull x86 fixes from Thomas Gleixner:
"A set of x86 fixes and functional updates:
- Prevent stale huge I/O TLB mappings on 32bit. A long standing bug
which got exposed by KPTI support for 32bit
- Prevent bogus access_ok() warnings in arch_stack_walk_user()
- Add display quirks for Lenovo devices which have height and width
swapped
- Add the missing CR2 fixup for 32 bit async pagefaults. Fallout of
the CR2 bug fix series.
- Unbreak handling of force enabled HPET by moving the 'is HPET
counting' check back to the original place.
- A more accurate check for running on a hypervisor platform in the
MDS mitigation code. Not perfect, but more accurate than the
previous one.
- Update a stale and confusing comment vs. IRQ stacks"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/speculation/mds: Apply more accurate check on hypervisor platform
x86/hpet: Undo the early counter is counting check
x86/entry/32: Pass cr2 to do_async_page_fault()
x86/irq/64: Update stale comment
x86/sysfb_efi: Add quirks for some devices with swapped width and height
x86/stacktrace: Prevent access_ok() warnings in arch_stack_walk_user()
mm/vmalloc: Sync unmappings in __purge_vmap_area_lazy()
x86/mm: Sync also unmappings in vmalloc_sync_all()
x86/mm: Check for pfn instead of page in vmalloc_sync_one()
Pull perf fixes from Thomas Gleixner:
"A pile of perf related fixes:
Kernel:
- Fix SLOTS PEBS event constraints for Icelake CPUs
- Add the missing mask bit to allow counting hardware generated
prefetches on L3 for Icelake CPUs
- Make the test for hypervisor platforms more accurate (as far as
possible)
- Handle PMUs correctly which override event->cpu
- Yet another missing fallthrough annotation
Tools:
perf.data:
- Fix loading of compressed data split across adjacent records
- Fix buffer size setting for processing CPU topology perf.data
header.
perf stat:
- Fix segfault for event group in repeat mode
- Always separate "stalled cycles per insn" line, it was being
appended to the "instructions" line.
perf script:
- Fix --max-blocks man page description.
- Improve man page description of metrics.
- Fix off by one in brstackinsn IPC computation.
perf probe:
- Avoid calling freeing routine multiple times for same pointer.
perf build:
- Do not use -Wshadow on gcc < 4.8, avoiding too strict warnings
treated as errors, breaking the build"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Mark expected switch fall-throughs
perf/core: Fix creating kernel counters for PMUs that override event->cpu
perf/x86: Apply more accurate check on hypervisor platform
perf/x86/intel: Fix invalid Bit 13 for Icelake MSR_OFFCORE_RSP_x register
perf/x86/intel: Fix SLOTS PEBS event constraint
perf build: Do not use -Wshadow on gcc < 4.8
perf probe: Avoid calling freeing routine multiple times for same pointer
perf probe: Set pev->nargs to zero after freeing pev->args entries
perf session: Fix loading of compressed data split across adjacent records
perf stat: Always separate stalled cycles per insn
perf stat: Fix segfault for event group in repeat mode
perf tools: Fix proper buffer size for feature processing
perf script: Fix off by one in brstackinsn IPC computation
perf script: Improve man page description of metrics
perf script: Fix --max-blocks man page description
Hi Linus,
Please, pull the following patches that mark switch cases where we are
expecting to fall through. These patches are part of the ongoing efforts
to enable -Wimplicit-fallthrough. Most of them have been baking in linux-next
for a whole development cycle.
Also, pull the Makefile patch that globally enables the
-Wimplicit-fallthrough option.
Finally, some missing-break fixes that have been tagged for -stable:
- drm/amdkfd: Fix missing break in switch statement
- drm/amdgpu/gfx10: Fix missing break in switch statement
Notice that with these changes, we completely get rid of all the
fall-through warnings in the kernel.
Thanks
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
-----BEGIN PGP SIGNATURE-----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=J2sO
-----END PGP SIGNATURE-----
Merge tag 'Wimplicit-fallthrough-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull Wimplicit-fallthrough enablement from Gustavo A. R. Silva:
"This marks switch cases where we are expecting to fall through, and
globally enables the -Wimplicit-fallthrough option in the main
Makefile.
Finally, some missing-break fixes that have been tagged for -stable:
- drm/amdkfd: Fix missing break in switch statement
- drm/amdgpu/gfx10: Fix missing break in switch statement
With these changes, we completely get rid of all the fall-through
warnings in the kernel"
* tag 'Wimplicit-fallthrough-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
Makefile: Globally enable fall-through warning
drm/i915: Mark expected switch fall-throughs
drm/amd/display: Mark expected switch fall-throughs
drm/amdkfd/kfd_mqd_manager_v10: Avoid fall-through warning
drm/amdgpu/gfx10: Fix missing break in switch statement
drm/amdkfd: Fix missing break in switch statement
perf/x86/intel: Mark expected switch fall-throughs
mtd: onenand_base: Mark expected switch fall-through
afs: fsclient: Mark expected switch fall-throughs
afs: yfsclient: Mark expected switch fall-throughs
can: mark expected switch fall-throughs
firewire: mark expected switch fall-throughs
- Add ABI to kernel image file which allows e.g. the file utility to figure
out the kernel version.
- Wire up clone3 system call.
- Add support for kasan bitops instrumentation.
- uapi header cleanup: use __u{16,32,64} instead of uint{16,32,64}_t.
- Provide proper ARCH_ZONE_DMA_BITS so the s390 DMA zone is correctly defined
with 2 GB instead of the default value of 1 MB.
- Farhan Ali leaves the group of vfio-ccw maintainers.
- Various small vfio-ccw fixes.
- Add missing locking for airq_areas array in virtio code.
- Minor qdio improvements.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJdPBMNAAoJECIOw3kbKW7CNp0QAKcvg0eCNUfP9KuTGZgie4Gt
MeRESA4SpF2nS9Wp/cxnENRaMDYfUGdoFwXHJEuTTrUvBhBykaRJ/U0qMU5v25kD
nesmHYpuhRYxzHp+Cm5nzzicNID/9pI+Yd3E/eefpUsMt90sLXZ/1vAaPmPQJ/9S
AsA8jyE35qKdZ8zeBCF7zGy0jsy3A/afi52C6HIZlhkoDaTHBMChndUORIQ1XIK1
Ce5ssmiqlbFPC0JJ1ZbnSQB/kyRunaE7fF6tdFDOztSqdc19JZ5xxStn4bSZo508
54mqoS3tHR7+fDmu2CH/tIHtPkinPFvQmxbTQemSnz3xRVpf3YPlnxEHmuQcAOp5
edDwdlx28QELRi9OGAPR60t0rtT2iWO32xPeh2hYoakDDHamnDmk1BWKn1FPbBJr
IZpvlfzn0t2Mlf96YiEzdRqEYIjBgtw0yl/ozRIRyEsGC4eLhvHOmrqgchCk/tD+
Gy+BeDYCaHj4Lu4hhZdAmUcFAbLJu1dXX1GXijmAMvQ7xFhUMHaj+BxWz7Ou5+cg
zpcSHUbRVXUwbLVdDttJ6VGDo9KriYg54aPLOdUZ1rAA3cWBZRjA/iDqT7NIWWe+
HV9IKZ55+lPE/xuVvbbwKn7JucX6yBCzdCRADDmC+VKzwVS78mUdIppaLaq+KY9G
9Zxgd3oVatQ5VMC1yXOk
=J+rB
-----END PGP SIGNATURE-----
Merge tag 's390-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Add ABI to kernel image file which allows e.g. the file utility to
figure out the kernel version.
- Wire up clone3 system call.
- Add support for kasan bitops instrumentation.
- uapi header cleanup: use __u{16,32,64} instead of uint{16,32,64}_t.
- Provide proper ARCH_ZONE_DMA_BITS so the s390 DMA zone is correctly
defined with 2 GB instead of the default value of 1 MB.
- Farhan Ali leaves the group of vfio-ccw maintainers.
- Various small vfio-ccw fixes.
- Add missing locking for airq_areas array in virtio code.
- Minor qdio improvements.
* tag 's390-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
MAINTAINERS: vfio-ccw: Remove myself as the maintainer
s390/mm: use shared variables for sysctl range check
virtio/s390: fix race on airq_areas[]
s390/dma: provide proper ARCH_ZONE_DMA_BITS value
s390/kasan: add bitops instrumentation
s390/bitops: make test functions return bool
s390: wire up clone3 system call
kbuild: enable arch/s390/include/uapi/asm/zcrypt.h for uapi header test
s390: use __u{16,32,64} instead of uint{16,32,64}_t in uapi header
s390/hypfs: fix a typo in the name of a function
s390/qdio: restrict QAOB usage to IQD unicast queues
s390/qdio: add sanity checks to the fast-requeue path
s390: enable detection of kernel version from bzImage
Documentation: fix vfio-ccw doc
vfio-ccw: Update documentation for csch/hsch
vfio-ccw: Don't call cp_free if we are processing a channel program
vfio-ccw: Set pa_nr to 0 if memory allocation fails for pa_iova_pfn
vfio-ccw: Fix memory leak and don't call cp_free in cp_init
vfio-ccw: Fix misleading comment when setting orb.cmd.c64
from the massive RST conversion; a few other small fixes as well.
-----BEGIN PGP SIGNATURE-----
iQFCBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl07C9gPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YQrgH+L7kPaRWcH+lorh7WxiIhlAvqFsR4xjRKTZV
qZwlv3+87qjPu86DBdjRlos8PsoIkdD4+jH0u+7swYtZ5hsS8DYcfZ42i+nHqP7D
k/XwVPW71ikpoi4vQVsO9zrwaOKPyL8AoNzlj+VpiVGAu/PYApGUfdkdOD0xxlOW
hst6GKNAKrsoQ8fW3AIuCVi4oEEYru2FHMKLcpHBFDZtR7zgC4dEgs7UqEttAzHU
559nkH2LKekya4pQaFMdSb6Wgj+JeIkI2XzujXES6QEdmf8vrvjkkvHeByoOYjNY
NNdKNGhPUWrEUMfyzRQpEIcF+Dk3lYtBEDQO8+XCh6mpa9h7kQ==
=BUU+
-----END PGP SIGNATURE-----
Merge tag 'docs-5.3-1' of git://git.lwn.net/linux
Pull documentation fixes from Jonathan Corbet:
"This is mostly a set of follow-on fixes from Mauro fixing various
fallout from the massive RST conversion; a few other small fixes as
well"
* tag 'docs-5.3-1' of git://git.lwn.net/linux: (21 commits)
docs: phy: Drop duplicate 'be made'
doc:it_IT: translations in process/
docs/vm: transhuge: fix typo in madvise reference
doc:it_IT: rephrase statement
doc:it_IT: align translation to mainline
docs: load_config.py: ensure subdirs end with "/"
docs: virtual: add it to the documentation body
docs: remove extra conf.py files
docs: load_config.py: avoid needing a conf.py just due to LaTeX docs
scripts/sphinx-pre-install: seek for Noto CJK fonts for pdf output
scripts/sphinx-pre-install: cleanup Gentoo checks
scripts/sphinx-pre-install: fix latexmk dependencies
scripts/sphinx-pre-install: don't use LaTeX with CentOS 7
scripts/sphinx-pre-install: fix script for RHEL/CentOS
docs: conf.py: only use CJK if the font is available
docs: conf.py: add CJK package needed by translations
docs: pdf: add all Documentation/*/index.rst to PDF output
docs: fix broken doc references due to renames
docs: power: add it to to the main documentation index
docs: powerpc: convert docs to ReST and rename to *.rst
...
- Big bad batch of MAINTAINERS updates
- Fix handling of SP alignment fault exceptions
- Fix PSTATE.SSBS handling on heterogeneous systems
- Fix fallout from moving to the generic vDSO implementation
- Fix stack unwinding in the face of frame corruption
- Fix off-by-one in IORT code
- Minor SVE cleanups
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl062dMACgkQt6xw3ITB
YzQD9Qf+LvNj+i1UaVUjmUTAhThbIiPZPcz9rkeMc50AZl7O8XlRH8p4z8lWMJ8l
sAqfsDAAdVsKOJPFYWnV432z5VmUNfwaw8Mjlx2Ij1I4C2lbA9fr5uW4Umn7s/B3
IpbD4nFBt4UX24Ps3YD5fbrdTBtMsBiDRBxzTBouTalfP+nT/d1PB50CqCUBFEJ4
hYoG2IbfsAOPVDnH33J3svehWJn7RerfbgX0Mb4ssxeonswuNdiYUnzUfkJuvVuW
lWaUck4G0y5tWmULQLn7n9RVgBMq1hWE/731gRhtR4hiHA79ml8b2AggnosIwfLO
064KsHGrb4+jUUNQ1KIQzTU3sKdkVg==
=nLT9
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"There's more here than we usually have at this stage, but that's
mainly down to the stacktrace changes which came in slightly too late
for the merge window.
Summary:
- Big bad batch of MAINTAINERS updates
- Fix handling of SP alignment fault exceptions
- Fix PSTATE.SSBS handling on heterogeneous systems
- Fix fallout from moving to the generic vDSO implementation
- Fix stack unwinding in the face of frame corruption
- Fix off-by-one in IORT code
- Minor SVE cleanups"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
ACPI/IORT: Fix off-by-one check in iort_dev_find_its_id()
arm64: entry: SP Alignment Fault doesn't write to FAR_EL1
arm64: Force SSBS on context switch
MAINTAINERS: Update my email address
MAINTAINERS: Update my email address
MAINTAINERS: Fix spelling mistake in my name
MAINTAINERS: Update my email address to @kernel.org
arm64: mm: Drop pte_huge()
arm64/sve: Fix a couple of magic numbers for the Z-reg count
arm64/sve: Factor out FPSIMD to SVE state conversion
arm64: stacktrace: Better handle corrupted stacks
arm64: stacktrace: Factor out backtrace initialisation
arm64: stacktrace: Constify stacktrace.h functions
arm64: vdso: Cleanup Makefiles
arm64: vdso: fix flip/flop vdso build bug
arm64: vdso: Fix population of AT_SYSINFO_EHDR for compat vdso
Since commit eec4844fae ("proc/sysctl: add shared variables for range
check") special shared variables are available for sysctl range check.
Reuse them for /proc/sys/vm/allocate_pgste proc handler.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
On s390 ZONE_DMA is up to 2G, i.e. ARCH_ZONE_DMA_BITS should be 31 bits.
The current value is 24 and makes __dma_direct_alloc_pages() take a
wrong turn first (but __dma_direct_alloc_pages() recovers then).
Let's correct ARCH_ZONE_DMA_BITS value and avoid wrong turns.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reported-by: Petr Tesarik <ptesarik@suse.cz>
Fixes: c61e963734 ("dma-direct: add support for allocation from ZONE_DMA and ZONE_DMA32")
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
This patch fixes the following warnings:
arch/x86/events/intel/core.c: In function ‘intel_pmu_init’:
arch/x86/events/intel/core.c:4959:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
pmem = true;
~~~~~^~~~~~
arch/x86/events/intel/core.c:4960:2: note: here
case INTEL_FAM6_SKYLAKE_MOBILE:
^~~~
arch/x86/events/intel/core.c:5008:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
pmem = true;
~~~~~^~~~~~
arch/x86/events/intel/core.c:5009:2: note: here
case INTEL_FAM6_ICELAKE_MOBILE:
^~~~
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Four minor RISC-V-related changes for v5.3-rc2:
- Add support for the new clone3 syscall for RV64, relying on the
generic support
- Add DT data for the gigabit Ethernet controller on the SiFive FU540
and the HiFive Unleashed board
- Update MAINTAINERS to add me to the arch/riscv maintainers' list
- Add support for PCIe message-signaled interrupts by reusing the
generic header file
-----BEGIN PGP SIGNATURE-----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=z0UB
-----END PGP SIGNATURE-----
Merge tag 'riscv/for-v5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley:
"Four minor RISC-V-related changes:
- Add support for the new clone3 syscall for RV64, relying on the
generic support
- Add DT data for the gigabit Ethernet controller on the SiFive FU540
and the HiFive Unleashed board
- Update MAINTAINERS to add me to the arch/riscv maintainers' list
- Add support for PCIe message-signaled interrupts by reusing the
generic header file"
* tag 'riscv/for-v5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: dts: Add DT node for SiFive FU540 Ethernet controller driver
riscv: include generic support for MSI irqdomains
MAINTAINERS: Add Paul as a RISC-V maintainer
riscv: enable sys_clone3 syscall for rv64
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
This patch fixes the following warnings:
arch/x86/events/intel/core.c: In function ‘intel_pmu_init’:
arch/x86/events/intel/core.c:4959:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
arch/x86/events/intel/core.c:5008:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190624161913.GA32270@embeddedor
Signed-off-by: Ingo Molnar <mingo@kernel.org>
check_msr is used to fix a bug report in guest where KVM doesn't support
LBR MSR and cause #GP.
The msr check is bypassed on real HW to workaround a false failure,
see commit d0e1a507bd ("perf/x86/intel: Disable check_msr for real HW")
When running a guest with CONFIG_HYPERVISOR_GUEST not set or "nopv"
enabled, current check isn't enough and #GP could trigger.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1564022366-18293-1-git-send-email-zhenzhong.duan@oracle.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The Intel SDM states that bit 13 of Icelake's MSR_OFFCORE_RSP_x
register is valid, and used for counting hardware generated prefetches
of L3 cache. Update the bitmask to allow bit 13.
Before:
$ perf stat -e cpu/event=0xb7,umask=0x1,config1=0x1bfff/u sleep 3
Performance counter stats for 'sleep 3':
<not supported> cpu/event=0xb7,umask=0x1,config1=0x1bfff/u
After:
$ perf stat -e cpu/event=0xb7,umask=0x1,config1=0x1bfff/u sleep 3
Performance counter stats for 'sleep 3':
9,293 cpu/event=0xb7,umask=0x1,config1=0x1bfff/u
Signed-off-by: Yunying Sun <yunying.sun@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: alexander.shishkin@linux.intel.com
Cc: bp@alien8.de
Cc: hpa@zytor.com
Cc: jolsa@redhat.com
Cc: namhyung@kernel.org
Link: https://lkml.kernel.org/r/20190724082932.12833-1-yunying.sun@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Sampling SLOTS event and ref-cycles event in a group on Icelake gives
EINVAL.
SLOTS event is the event stands for the fixed counter 3, not fixed
counter 2. Wrong mask was set to SLOTS event in
intel_icl_pebs_event_constraints[].
Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 6017608936 ("perf/x86/intel: Add Icelake support")
Link: https://lkml.kernel.org/r/20190723200429.8180-1-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
X86_HYPER_NATIVE isn't accurate for checking if running on native platform,
e.g. CONFIG_HYPERVISOR_GUEST isn't set or "nopv" is enabled.
Checking the CPU feature bit X86_FEATURE_HYPERVISOR to determine if it's
running on native platform is more accurate.
This still doesn't cover the platforms on which X86_FEATURE_HYPERVISOR is
unsupported, e.g. VMware, but there is nothing which can be done about this
scenario.
Fixes: 8a4b06d391 ("x86/speculation/mds: Add sysfs reporting for MDS")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1564022349-17338-1-git-send-email-zhenzhong.duan@oracle.com
Rui reported that on a Pentium D machine which has HPET forced enabled
because it is not advertised by ACPI, the early counter is counting check
leads to a silent boot hang.
The reason is that the ordering of checking the counter first and then
reconfiguring the HPET fails to work on that machine. As the HPET is not
advertised and presumably not initialized by the BIOS the early enable and
the following reconfiguration seems to bring it into a broken state. Adding
clocksource=jiffies to the command line results in the following
clocksource watchdog warning:
clocksource: timekeeping watchdog on CPU1:
Marking clocksource 'tsc-early' as unstable because the skew is too large:
clocksource: 'hpet' wd_now: 33 wd_last: 33 mask: ffffffff
That clearly shows that the HPET is not counting after it got reconfigured
and reenabled. If the counter is not working then the HPET timer is not
expiring either, which explains the boot hang.
Move the counter is counting check after the full configuration again to
unbreak these systems.
Reported-by: Rui Salvaterra <rsalvaterra@gmail.com>
Fixes: 3222daf970 ("x86/hpet: Separate counter check out of clocksource register code")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Rui Salvaterra <rsalvaterra@gmail.com>
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1907250810530.1791@nanos.tec.linutronix.de
UAPI headers licensed under GPL are supposed to have exception
"WITH Linux-syscall-note" so that they can be included into non-GPL
user space application code.
The exception note is missing in some UAPI headers.
Some of them slipped in by the treewide conversion commit b24413180f
("License cleanup: add SPDX GPL-2.0 license identifier to files with
no license"). Just run:
$ git show --oneline b24413180f -- arch/x86/include/uapi/asm/
I believe they are not intentional, and should be fixed too.
This patch was generated by the following script:
git grep -l --not -e Linux-syscall-note --and -e SPDX-License-Identifier \
-- :arch/*/include/uapi/asm/*.h :include/uapi/ :^*/Kbuild |
while read file
do
sed -i -e '/[[:space:]]OR[[:space:]]/s/\(GPL-[^[:space:]]*\)/(\1 WITH Linux-syscall-note)/g' \
-e '/[[:space:]]or[[:space:]]/s/\(GPL-[^[:space:]]*\)/(\1 WITH Linux-syscall-note)/g' \
-e '/[[:space:]]OR[[:space:]]/!{/[[:space:]]or[[:space:]]/!s/\(GPL-[^[:space:]]*\)/\1 WITH Linux-syscall-note/g}' $file
done
After this patch is applied, there are 5 UAPI headers that do not contain
"WITH Linux-syscall-note". They are kept untouched since this exception
applies only to GPL variants.
$ git grep --not -e Linux-syscall-note --and -e SPDX-License-Identifier \
-- :arch/*/include/uapi/asm/*.h :include/uapi/ :^*/Kbuild
include/uapi/drm/panfrost_drm.h:/* SPDX-License-Identifier: MIT */
include/uapi/linux/batman_adv.h:/* SPDX-License-Identifier: MIT */
include/uapi/linux/qemu_fw_cfg.h:/* SPDX-License-Identifier: BSD-3-Clause */
include/uapi/linux/vbox_err.h:/* SPDX-License-Identifier: MIT */
include/uapi/linux/virtio_iommu.h:/* SPDX-License-Identifier: BSD-3-Clause */
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An assortment of non-regression fixes that have accumulated since the start of
the merge window.
A fix for a user triggerable oops on machines where transactional memory is
disabled, eg. Power9 bare metal, Power8 with TM disabled on the command line, or
all Power7 or earlier machines.
Three fixes for handling of PMU and power saving registers when running nested
KVM on Power9.
Two fixes for bugs found while stress testing the XIVE interrupt controller
code, also on Power9.
A fix to allow guests to boot under Qemu/KVM on Power9 using the the Hash MMU
with >= 1TB of memory.
Two fixes for bugs in the recent DMA cleanup, one of which could lead to
checkstops.
And finally three fixes for the PAPR SCM nvdimm driver.
Thanks to:
Alexey Kardashevskiy, Andrea Arcangeli, Cédric Le Goater, Christoph Hellwig,
David Gibson, Gautham R. Shenoy, Michael Neuling, Oliver O'Halloran,, Satheesh
Rajendran, Shawn Anastasio, Suraj Jitindar Singh, Vaibhav Jain.
-----BEGIN PGP SIGNATURE-----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=Yc9T
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"An assortment of non-regression fixes that have accumulated since the
start of the merge window.
- A fix for a user triggerable oops on machines where transactional
memory is disabled, eg. Power9 bare metal, Power8 with TM disabled
on the command line, or all Power7 or earlier machines.
- Three fixes for handling of PMU and power saving registers when
running nested KVM on Power9.
- Two fixes for bugs found while stress testing the XIVE interrupt
controller code, also on Power9.
- A fix to allow guests to boot under Qemu/KVM on Power9 using the
the Hash MMU with >= 1TB of memory.
- Two fixes for bugs in the recent DMA cleanup, one of which could
lead to checkstops.
- And finally three fixes for the PAPR SCM nvdimm driver.
Thanks to: Alexey Kardashevskiy, Andrea Arcangeli, Cédric Le Goater,
Christoph Hellwig, David Gibson, Gautham R. Shenoy, Michael Neuling,
Oliver O'Halloran, Satheesh Rajendran, Shawn Anastasio, Suraj Jitindar
Singh, Vaibhav Jain"
* tag 'powerpc-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/papr_scm: Force a scm-unbind if initial scm-bind fails
powerpc/papr_scm: Update drc_pmem_unbind() to use H_SCM_UNBIND_ALL
powerpc/pseries: Update SCM hcall op-codes in hvcall.h
powerpc/tm: Fix oops on sigreturn on systems without TM
powerpc/dma: Fix invalid DMA mmap behavior
KVM: PPC: Book3S HV: XIVE: fix rollback when kvmppc_xive_create fails
powerpc/xive: Fix loop exit-condition in xive_find_target_in_mask()
powerpc: fix off by one in max_zone_pfn initialization for ZONE_DMA
KVM: PPC: Book3S HV: Save and restore guest visible PSSCR bits on pseries
powerpc/pmu: Set pmcregs_in_use in paca when running as LPAR
KVM: PPC: Book3S HV: Always save guest pmu for guest capable of nesting
powerpc/mm: Limit rma_size to 1TB when running without HV mode
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJdOEuhAAoJEL/70l94x66DX/IH/3c6ADaZkuwzUMtJZgib/slX
V7h4ljoW33M85z3nCF5+kY3CNl8c9F2xKGcAIUlJF8MIsZW+zB3HjuU1LC4fCzuk
TqpBf74DpQsKCsv1ngiV02lefPVQ7/VT/QFY7EXNuAqNRfgsBRNoi50244a0ZKpD
KydzKTDKMD5HjE4lHb+bNr+guqkisPx0b0mZtsb4R9uuUSwXEa8DLmWQF2Do7zBj
6G9UD6a1AP5XQBwRRbo5a78b5NZQcF5R9wVEzsmK7OGUw/yC4Em4HVt46z+oT5cm
JK9m59XDqJaL6HMAWC2P/mXUj6o+PP+uBE2uuvkGCNcTLQZwWf+dq9961tWg81E=
=DD/Z
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Bugfixes, a pvspinlock optimization, and documentation moving"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: X86: Boost queue head vCPU to mitigate lock waiter preemption
Documentation: move Documentation/virtual to Documentation/virt
KVM: nVMX: Set cached_vmcs12 and cached_shadow_vmcs12 NULL after free
KVM: X86: Dynamically allocate user_fpu
KVM: X86: Fix fpu state crash in kvm guest
Revert "kvm: x86: Use task structs fpu field for user"
KVM: nVMX: Clear pending KVM_REQ_GET_VMCS12_PAGES when leaving nested
Commit 11752adb (locking/pvqspinlock: Implement hybrid PV queued/unfair locks)
introduces hybrid PV queued/unfair locks
- queued mode (no starvation)
- unfair mode (good performance on not heavily contended lock)
The lock waiter goes into the unfair mode especially in VMs with over-commit
vCPUs since increaing over-commitment increase the likehood that the queue
head vCPU may have been preempted and not actively spinning.
However, reschedule queue head vCPU timely to acquire the lock still can get
better performance than just depending on lock stealing in over-subscribe
scenario.
Testing on 80 HT 2 socket Xeon Skylake server, with 80 vCPUs VM 80GB RAM:
ebizzy -M
vanilla boosting improved
1VM 23520 25040 6%
2VM 8000 13600 70%
3VM 3100 5400 74%
The lock holder vCPU yields to the queue head vCPU when unlock, to boost queue
head vCPU which is involuntary preemption or the one which is voluntary halt
due to fail to acquire the lock after a short spin in the guest.
Cc: Waiman Long <longman@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit a0d14b8909 ("x86/mm, tracing: Fix CR2 corruption") added the
address parameter to do_async_page_fault(), but does not pass it from the
32-bit entry point. To plumb it through, factor-out
common_exception_read_cr2 in the same fashion as common_exception, and uses
it from both page_fault and async_page_fault.
For a 32-bit KVM guest, this fixes:
Run /sbin/init as init process
Starting init: /sbin/init exists but couldn't execute it (error -14)
Fixes: a0d14b8909 ("x86/mm, tracing: Fix CR2 corruption")
Signed-off-by: Matt Mullins <mmullins@fb.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190724042058.24506-1-mmullins@fb.com
Renaming docs seems to be en vogue at the moment, so fix on of the
grossly misnamed directories. We usually never use "virtual" as
a shortcut for virtualization in the kernel, but always virt,
as seen in the virt/ top-level directory. Fix up the documentation
to match that.
Fixes: ed16648eb5 ("Move kvm, uml, and lguest subdirectories under a common "virtual" directory, I.E:")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull parisc fixes from Helge Deller:
- Fix build issues when kprobes are enabled
- Speed up ITLB/DTLB cache flushes when running on machines with
combined TLBs
* 'parisc-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Flush ITLB in flush_tlb_all_local() only on split TLB machines
parisc: add kprobe_fault_handler()
- Fix i.MX8MM SAI3 RXC/TXFS pinmux configuration.
- Fix i.MX7ULP usb-phy unit address to drop extra '0x' notation.
- Fix typo of clock frequency property name in a few i.MX6UL board
I2C buses.
- Drop "fsl,imx6sx-sai" from i.MX8M SAI device, as it's not compatible
with i.MX6SX SAI.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJdNs2iAAoJEFBXWFqHsHzOyZ8H/3u3AjWSJxUa845cro1Q/Ibh
Ap2Skk9NgX3Wo9oRaet6Nc44iXG4zBXYfhVyzUG5H6t2mk4S2c2RaKLd55n6mHz0
6q1G57Z9ogxBzXrWgbiZtlCOlzZCNXVWZiB5eIUT12Mway+0HMEe4zcKAEvADZnt
c2tFf2AbjRe0ye1M2a6V09/TunIT8Hv2XH88vA4MxAJauOWNTkx4TrmXVNnokax+
S5Ha0Djr7seuHf6HLr95lB7QAj0ozTpZY17HsOmdFaO2UREVftm7JMhaNmxL072u
by1hwAALp9vYaDDzfw+7NjaquJiF6rGO6Vgi78d3brBFcXPSXmXpufUffl1aFWE=
=pQlh
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.3:
- Fix i.MX8MM SAI3 RXC/TXFS pinmux configuration.
- Fix i.MX7ULP usb-phy unit address to drop extra '0x' notation.
- Fix typo of clock frequency property name in a few i.MX6UL board
I2C buses.
- Drop "fsl,imx6sx-sai" from i.MX8M SAI device, as it's not compatible
with i.MX6SX SAI.
* tag 'imx-fixes-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mq: fix SAI compatible
arm64: dts: imx8mm: Correct SAI3 RXC/TXFS pin's mux option #1
ARM: dts: imx6ul: fix clock frequency property name of I2C buses
ARM: dts: imx7ulp: Fix usb-phy unit address format
Link: https://lore.kernel.org/r/20190723090827.GU15632@dragon
Signed-off-by: Olof Johansson <olof@lixom.net>
This enables the new or updates driver options for U8500
that got merged into v5.3-rc1:
- CMA, MCDE driver, LIMA driver and the Samsung S6D16D0 driver
enabled by default bringing up the new graphics support.
Include the LOGO so we can see when the graphics are live.
- We use the IIO hwmon bridge for reflecting temperature
in the system.
- Set MUSB to PIO mode as this is the one working most stable
for the time being.
- HWSPINLOCK needs to be set to get the hardware semaphore
driver to compile and link properly.
Link: https://lore.kernel.org/r/20190723081523.13079-2-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
This refreshes the outdated U8500 defconfig: some options
moved around, PS/2 mouse is no longer default on, crypto
options moved around etc.
Link: https://lore.kernel.org/r/20190723081523.13079-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
When building a multiplatform kernel that includes armv4 support,
the default target CPU does not support the blx instruction,
which leads to a build failure:
arch/arm/mach-davinci/sleep.S: Assembler messages:
arch/arm/mach-davinci/sleep.S:56: Error: selected processor does not support `blx ip' in ARM mode
Add a .arch statement in the sources to make this file build.
Link: https://lore.kernel.org/r/20190722145211.1154785-1-arnd@arndb.de
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
Add KASAN instrumentation of architecture-specific asm implementation
of bitops. It also covers s390 specific *_inv functions.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Make s390/bitops test functions return bool values. That enforces return
value range to 0 and 1 and matches with asm-generic/bitops-instrumented.h
declarations as well as some other architectures implementations.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Tested (64-bit and compat mode) using program from
http://lkml.kernel.org/r/20190604212930.jaaztvkent32b7d3@brauner.io
with the following:
return syscall(__NR_clone, flags, 0, pidfd, 0, 0);
changed to:
return syscall(__NR_clone, 0, flags, pidfd, 0, 0);
due to CLONE_BACKWARDS2.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
When CONFIG_UAPI_HEADER_TEST=y, exported headers are compile-tested to
make sure they can be included from user-space.
Currently, zcrypt.h is excluded from the test coverage. To make it
join the compile-test, we need to fix the build errors attached below.
For a case like this, we decided to use __u{8,16,32,64} variable types
in this discussion:
https://lkml.org/lkml/2019/6/5/18
Build log:
CC usr/include/asm/zcrypt.h.s
In file included from <command-line>:32:0:
./usr/include/asm/zcrypt.h:163:2: error: unknown type name ‘uint16_t’
uint16_t cprb_len;
^~~~~~~~
./usr/include/asm/zcrypt.h:168:2: error: unknown type name ‘uint32_t’
uint32_t source_id;
^~~~~~~~
./usr/include/asm/zcrypt.h:169:2: error: unknown type name ‘uint32_t’
uint32_t target_id;
^~~~~~~~
./usr/include/asm/zcrypt.h:170:2: error: unknown type name ‘uint32_t’
uint32_t ret_code;
^~~~~~~~
./usr/include/asm/zcrypt.h:171:2: error: unknown type name ‘uint32_t’
uint32_t reserved1;
^~~~~~~~
./usr/include/asm/zcrypt.h:172:2: error: unknown type name ‘uint32_t’
uint32_t reserved2;
^~~~~~~~
./usr/include/asm/zcrypt.h:173:2: error: unknown type name ‘uint32_t’
uint32_t payload_len;
^~~~~~~~
./usr/include/asm/zcrypt.h:182:2: error: unknown type name ‘uint16_t’
uint16_t ap_id;
^~~~~~~~
./usr/include/asm/zcrypt.h:183:2: error: unknown type name ‘uint16_t’
uint16_t dom_id;
^~~~~~~~
./usr/include/asm/zcrypt.h:198:2: error: unknown type name ‘uint16_t’
uint16_t targets_num;
^~~~~~~~
./usr/include/asm/zcrypt.h:199:2: error: unknown type name ‘uint64_t’
uint64_t targets;
^~~~~~~~
./usr/include/asm/zcrypt.h:200:2: error: unknown type name ‘uint64_t’
uint64_t weight;
^~~~~~~~
./usr/include/asm/zcrypt.h:201:2: error: unknown type name ‘uint64_t’
uint64_t req_no;
^~~~~~~~
./usr/include/asm/zcrypt.h:202:2: error: unknown type name ‘uint64_t’
uint64_t req_len;
^~~~~~~~
./usr/include/asm/zcrypt.h:203:2: error: unknown type name ‘uint64_t’
uint64_t req;
^~~~~~~~
./usr/include/asm/zcrypt.h:204:2: error: unknown type name ‘uint64_t’
uint64_t resp_len;
^~~~~~~~
./usr/include/asm/zcrypt.h:205:2: error: unknown type name ‘uint64_t’
uint64_t resp;
^~~~~~~~
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Extend "parmarea" to include an offset of the version string, which is
stored as 8-byte big endian value.
To retrieve version string from bzImage reliably, one should check the
presence of "S390EP" ascii string at 0x10008 (available since v3.2),
then read the version string offset from 0x10428 (which has been 0
since v3.2 up to now). The string is null terminated.
Could be retrieved with the following "file" command magic (requires
file v5.34):
8 string \x02\x00\x00\x18\x60\x00\x00\x50\x02\x00\x00\x68\x60\x00\x00\x50\x40\x40\x40\x40\x40\x40\x40\x40 Linux S390
>0x10008 string S390EP
>>0x10428 bequad >0
>>>(0x10428.Q) string >\0 \b, version %s
Reported-by: Petr Tesarik <ptesarik@suse.com>
Suggested-by: Petr Tesarik <ptesarik@suse.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
The i.MX8M SAI block is not compatible with the i.MX6SX one, as the
register layout has changed due to two version registers being added
at the beginning of the address map. Remove the bogus compatible.
Fixes: 8c61538dc9 ("arm64: dts: imx8mq: Add SAI2 node")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to i.MX8MM reference manual Rev.1, 03/2019:
SAI3_RXC pin's mux option #1 should be GPT1_CLK, NOT GPT1_CAPTURE2;
SAI3_TXFS pin's mux option #1 should be GPT1_CAPTURE2, NOT GPT1_CLK.
Fixes: c1c9d41319 ("dt-bindings: imx: Add pinctrl binding doc for imx8mm")
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
DT node for SiFive FU540-C000 GEMGXL Ethernet controller driver added
Signed-off-by: Yash Shah <yash.shah@sifive.com>
Reviewed-by: Sagar Kadam <sagar.kadam@sifive.com>
Cc: Andrew Lunn <andrew@lunn.ch>
[paul.walmsley@sifive.com: changed "phy1" to "phy0" at Andrew Lunn's
suggestion]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Some RISC-V systems include PCIe host controllers that support PCIe
message-signaled interrupts. For this to work on Linux, we need to
enable PCI_MSI_IRQ_DOMAIN and define struct msi_alloc_info. Support
for the latter is enabled by including the architecture-generic msi.h
include.
Signed-off-by: Wesley Terpstra <wesley@sifive.com>
[paul.walmsley@sifive.com: split initial patch into one arch/riscv
patch and one drivers/pci patch]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
