commit b0616c5306 upstream.
Otherwise we'll have backtraces in assert_panel_unlocked because the
BIOS locks the register. In the reporter's case this regression was
introduced in
commit c31407a367
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Thu Oct 18 21:07:01 2012 +0100
drm/i915: Add no-lvds quirk for Supermicro X7SPA-H
Reported-by: Alexey Orishko <alexey.orishko@gmail.com>
Cc: Alexey Orishko <alexey.orishko@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Francois Tigeot <ftigeot@wolfpond.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Tested-by: Alexey Orishko <alexey.orishko@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b68362278a upstream.
Apparently PCH fifo underruns are tricky, we have plenty reports that
we see the occasional underrun (especially at boot-up).
So for a change let's see what happens when we don't re-enable pch
fifo underrun reporting when the pipe is disabled. This means that the
kernel can't catch pch fifo underruns when they happen (except when
all pipes are on on the pch). But we'll still catch underruns when
disabling the pipe again. So not a terrible reduction in test
coverage.
Since the DRM_ERROR is new and hence a regression plan B would be to
revert it back to a debug output. Which would be a lot worse than this
hack for underrun test coverage in the wild. See the referenced
discussions for more.
References: http://mid.gmane.org/CA+gsUGRfGe3t4NcjdeA=qXysrhLY3r4CEu7z4bjTwxi1uOfy+g@mail.gmail.com
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85898
References: https://bugs.freedesktop.org/show_bug.cgi?id=85898
References: https://bugs.freedesktop.org/show_bug.cgi?id=86233
References: https://bugs.freedesktop.org/show_bug.cgi?id=86478
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Tested-by: lu hua <huax.lu@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 91ed6fd2c3 upstream.
Some radeon ASICs don't support all 64 address bits of MSIs despite
advertising support for 64-bit MSIs in their configuration space.
This breaks on systems such as IBM POWER7/8, where 64-bit MSIs can
be assigned with some of the high address bits set.
This makes use of the newly introduced "no_64bit_msi" flag in structure
pci_dev to allow the MSI allocation code to fallback to 32-bit MSIs
on those adapters.
Adding Alex's review tag. Patch to the driver is identical to the
reviewed one, I dropped the arch/powerpc hunk rewrote the subject
and cset comment.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 28731d5818 upstream.
Value needs to be swapped on BE.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f0d7bfb940 upstream.
Need to unlock the crtc after updating the blanking state.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8efe82ca90 upstream.
The power management code calls into the display code for
certain things. If certain power management sysfs attributes
are called before the driver has finished initializing all of
the hardware we can run into problems with uninitialized
modesetting state. Add a check to make sure modesetting
init has completed to the bandwidth update callbacks to
fix this. Can be triggered by the tlp and laptop start
up scripts depending on the timing.
bugs:
https://bugzilla.kernel.org/show_bug.cgi?id=83611https://bugs.freedesktop.org/show_bug.cgi?id=85771
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dc4edad653 upstream.
CE ram size is 32k/0k/0k for GFX/CS0/CS1 with CIK
Ported from amdgpu driver.
Signed-off-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9a72384d86 upstream.
When screen objects are enabled, the bpp is assumed to be 32, otherwise
it is set to 16.
v2:
* Use u32 instead of u64 for assumed_bpp.
* Fixed mechanism to check for screen objects
* Limit the back buffer size to VRAM.
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c572aaf46f upstream.
Limit primary to qemu vgamem size, to avoid reaching
qemu guest bug "requested primary larger than framebuffer"
on resizing screen too large to fit.
Remove unneeded and misleading variables.
Related to:
https://bugzilla.redhat.com/show_bug.cgi?id=1127552
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 595d373f1e upstream.
Fixes type/mask calculation being based on uninitialised data for VGA
outputs.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 813008cd3e upstream.
BIOS or firmware can modify hardware state during suspend/resume,
for example on the Toshiba CB35 or Lenovo T400, so log a debug message
instead of a warning if the backlight is unexpectedly enabled.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80930
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Scot Doyle <lkml14@scotdoyle.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b478e336b3 upstream.
The current error path calls tilcdc_unload() in case of an error to release
the resources. However, this is wrong because not all resources have been
allocated by the time an error occurs in tilcdc_load().
To fix it, this commit adds proper labels to bail out at the different
stages in the load function, and release only the resources actually allocated.
Tested-by: Darren Etheridge <detheridge@ti.com>
Tested-by: Johannes Pointner <johannes.pointner@br-automation.com>
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes: 3a49012224 ("drm/tilcdc: panel: fix leak when unloading the module")
Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1e99cfa8de upstream.
The translation from the X driver to the KMS one typo'ed a couple
of array indices, causing the HW cursor to look weird (blocky with
leaking edge colors). This fixes it.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c0c3e735fa upstream.
qemu as used by xend/xm toolstack uses a different subvendor id.
Bind the drm driver also to this emulated card.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 91e5649930 upstream.
As we use WC updates of the PTE, we are responsible for notifying the
hardware when to flush its TLBs. Do so after we zap all the PTEs before
suspend (and the BIOS tries to read our GTT).
Fixes a regression from
commit 828c79087c
Author: Ben Widawsky <benjamin.widawsky@intel.com>
Date: Wed Oct 16 09:21:30 2013 -0700
drm/i915: Disable GGTT PTEs on GEN6+ suspend
that survived and continue to cause harm even after
commit e568af1c62
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Wed Mar 26 20:08:20 2014 +0100
drm/i915: Undo gtt scratch pte unmapping again
v2: Trivial rebase.
v3: Fixes requires pointer dances.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82340
Tested-by: ming.yao@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Todd Previte <tprevite@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2e97140dd5 upstream.
Use the new vga_switcheroo_fini_domain_pm_ops function
to unregister the pm ops.
Based on a patch from:
Pali Rohár <pali.rohar@gmail.com>
bug:
https://bugzilla.kernel.org/show_bug.cgi?id=84431
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 53beaa01e0 upstream.
Use the new vga_switcheroo_fini_domain_pm_ops function
to unregister the pm ops.
Based on a patch from:
Pali Rohár <pali.rohar@gmail.com>
bug:
https://bugzilla.kernel.org/show_bug.cgi?id=84431
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 370ce45b59 upstream.
Otherwise we may fail to init the second compute ring.
Noticed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c1789a2e66 upstream.
Otherwise we may lose the DMA golden settings which can
lead to hangs, etc.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 799028d5d8 upstream.
Otherwise we may lose the DMA golden settings which can
lead to hangs, etc.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 31a25e2caf upstream.
Otherwise we may lose the DMA golden settings which can
lead to hangs, etc.
bug:
https://www.libreoffice.org/bugzilla/show_bug.cgi?id=83500
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ff4377924f upstream.
On systems with special thermal configurations make sure we make
note of the thermal setup. This is required for proper firmware
configuration on these systems.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f229407da7 upstream.
Semaphore values have 64 bits, not 32. This fixes a very subtle bug
that disables synchronization when the upper 32bits wasn't zero.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-By: Grigori Goronzy <greg@chown.ath.cx>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c940b4476f upstream.
pm_suspend is handled in the radeon_suspend callbacks.
pm_resume has special handling depending on whether
dpm or legacy pm is enabled. Change radeon_gpu_reset
to mirror the behavior in the suspend and resume
pathes.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6bce8d9772 upstream.
Properly set the thermal min and max temp on CI.
Otherwise, we end up setting the thermal ranges
to 0 on resume and end up in the lowest power state.
Signed-off-by: Oleg Chernovskiy <algonkvel@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f01ea0c3d9 upstream.
The code waiting for fifo idle was incorrect and could possibly spin
forever under certain circumstances.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reported-by: Mark Sheldon <markshel@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Reivewed-by: Mark Sheldon <markshel@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7a98948f3b upstream.
The vblank waits in intel_tv_detect_type() are timing out for some
reason. This is a regression caused removing seemingly useless vblank
waits from the modeset seqeuence in:
commit 56ef52cad5
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Thu May 8 19:23:15 2014 +0300
drm/i915: Kill vblank waits after pipe enable on gmch platforms
So it turns out they weren't all entirely useless. Apparently the pipe
has to go through one full frame before we enable the TV port. Add a
vblank wait to intel_enable_tv() to make sure that happens.
Another approach was attempted by placing the vblank wait just after
enabling the port. The theory behind that attempt was that we need to
let the port stay enabled for one full frame before disabling it again
during load detection. But that didn't work, and we definitely must
have the vblank wait before enabling the port.
Cc: Alan Bartlett <ajb@elrepo.org>
Tested-by: Alan Bartlett <ajb@elrepo.org>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=79311
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2232f0315c upstream.
In
commit 1f83fee08d
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Nov 15 17:17:22 2012 +0100
drm/i915: clear up wedged transitions
I've accidentally inverted the EIO/wedged handling in the fault
handler: We want to return the EIO as a SIGBUS only if it's not
because of the gpu having died, to prevent userspace from unduly
dying.
In my defence the comment right above is completely misleading, so fix
both.
v2: Drop the WARN_ON, it's not actually a bug to e.g. receive an -EIO
when swap-in fails.
v3: Don't remove too much ... oops.
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bbe1c2740d upstream.
The __init annotations for the DMI callback functions are wrong as this
code can be called even after the module has been initialized, e.g. like
this:
# echo 1 > /sys/bus/pci/devices/0000:00:02.0/remove
# modprobe i915
# echo 1 > /sys/bus/pci/rescan
The first command will remove the PCI device from the kernel's device
list so the second command won't see it right away. But as it registers
a PCI driver it'll see it on the third command. If the system happens to
match one of the DMI table entries we'll try to call a function in long
released memory and generate an Oops, at best.
Fix this by removing the bogus annotation.
Modpost should have caught that one but it ignores section reference
mismatches from the .rodata section. :/
Fixes: 25e341cfc3 ("drm/i915: quirk away broken OpRegion VBT")
Fixes: 8ca4013d70 ("CHROMIUM: i915: Add DMI override to skip CRT...")
Fixes: 425d244c86 ("drm/i915: ignore LVDS on intel graphics systems...")
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Duncan Laurie <dlaurie@chromium.org>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au> # Can modpost be fixed?
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 730a336c33 upstream.
There still seem to be stability problems with other systems.
Bug:
https://bugs.freedesktop.org/show_bug.cgi?id=72921
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0c78a44964 upstream.
bapm enabled the GPU and CPU to share TDP headroom. It was
disabled by default since some laptops hung when it was enabled
in conjunction with dpm. It seems to be stable on desktop
boards and fixes hangs on boot with dpm enabled on certain
boards, so enable it by default on desktop boards.
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=72921
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ece4a17d23 upstream.
Withtout this, ring initialization fails reliabily during resume with
[drm:init_ring_common] *ERROR* render ring initialization failed ctl 0001f001 head ffffff8804 tail 00000000 start 000e4000
This is not a complete fix, but it is verified to make the ring
initialization failures during resume much less likely.
We were not able to root-cause this bug (likely HW-specific to Gen4 chips)
yet. This is therefore used as a ducttape before problem is fully
understood and proper fix created, so that people don't suffer from
completely unusable systems in the meantime.
The discussion and debugging is happening at
https://bugs.freedesktop.org/show_bug.cgi?id=76554
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3c64bd26f7 upstream.
Return 2 so we can be sure the kernel has the necessary
changes for acceleration to work.
Note: This patch depends on these two commits:
- drm/radeon: fix cut and paste issue for hawaii.
- drm/radeon: use packet2 for nop on hawaii with old firmware
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Andreas Boll <andreas.boll.dev@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e9f274b2a1 upstream.
Some hawaii boards use a different method for fetching the
voltage information from the vbios.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f1d2a26b50 upstream.
Seems to make VM flushes more stable on SI and CIK.
v2: only use the PFP on the GFX ring on CIK
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5dc355325b upstream.
Looks like the lm63 driver supports the lm64 as well.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6b57f20cb5 upstream.
Some hawaii cards use a different method to fetch the
voltage info from the vbios.
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=74250
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a91576d791 upstream.
Commit 7dc19d5a "drivers: convert shrinkers to new count/scan API" added
deadlock warnings that ttm_page_pool_free() and ttm_dma_page_pool_free()
are currently doing GFP_KERNEL allocation.
But these functions did not get updated to receive gfp_t argument.
This patch explicitly passes sc->gfp_mask or GFP_KERNEL to these functions,
and removes the deadlock warning.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 71336e011d upstream.
While ttm_dma_pool_shrink_scan() tries to take mutex before doing GFP_KERNEL
allocation, ttm_pool_shrink_scan() does not do it. This can result in stack
overflow if kmalloc() in ttm_page_pool_free() triggered recursion due to
memory pressure.
shrink_slab()
=> ttm_pool_shrink_scan()
=> ttm_page_pool_free()
=> kmalloc(GFP_KERNEL)
=> shrink_slab()
=> ttm_pool_shrink_scan()
=> ttm_page_pool_free()
=> kmalloc(GFP_KERNEL)
Change ttm_pool_shrink_scan() to do like ttm_dma_pool_shrink_scan() does.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 22e71691fd upstream.
I can observe that RHEL7 environment stalls with 100% CPU usage when a
certain type of memory pressure is given. While the shrinker functions
are called by shrink_slab() before the OOM killer is triggered, the stall
lasts for many minutes.
One of reasons of this stall is that
ttm_dma_pool_shrink_count()/ttm_dma_pool_shrink_scan() are called and
are blocked at mutex_lock(&_manager->lock). GFP_KERNEL allocation with
_manager->lock held causes someone (including kswapd) to deadlock when
these functions are called due to memory pressure. This patch changes
"mutex_lock();" to "if (!mutex_trylock()) return ...;" in order to
avoid deadlock.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 46c2df68f0 upstream.
We can use "unsigned int" instead of "atomic_t" by updating start_pool
variable under _manager->lock. This patch will make it possible to avoid
skipping when choosing a pool to shrink in round-robin style, after next
patch changes mutex_lock(_manager->lock) to !mutex_trylock(_manager->lork).
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 11e504cc70 upstream.
list_empty(&_manager->pools) being false before taking _manager->lock
does not guarantee that _manager->npools != 0 after taking _manager->lock
because _manager->npools is updated under _manager->lock.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
