commit 04197b341f upstream.
We've had reports of generic/095 causing XFS to BUG() in
__xfs_get_blocks() due to the existence of delalloc blocks on a
direct I/O read. generic/095 issues a mix of various types of I/O,
including direct and memory mapped I/O to a single file. This is
clearly not supported behavior and is known to lead to such
problems. E.g., the lack of exclusion between the direct I/O and
write fault paths means that a write fault can allocate delalloc
blocks in a region of a file that was previously a hole after the
direct read has attempted to flush/inval the file range, but before
it actually reads the block mapping. In turn, the direct read
discovers a delalloc extent and cannot proceed.
While the appropriate solution here is to not mix direct and memory
mapped I/O to the same regions of the same file, the current
BUG_ON() behavior is probably overkill as it can crash the entire
system. Instead, localize the failure to the I/O in question by
returning an error for a direct I/O that cannot be handled safely
due to delalloc blocks. Be careful to allow the case of a direct
write to post-eof delalloc blocks. This can occur due to speculative
preallocation and is safe as post-eof blocks are not accompanied by
dirty pages in pagecache (conversely, preallocation within eof must
have been zeroed, and thus dirtied, before the inode size could have
been increased beyond said blocks).
Finally, provide an additional warning if a direct I/O write occurs
while the file is memory mapped. This may not catch all problematic
scenarios, but provides a hint that some known-to-be-problematic I/O
methods are in use.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
[bwh: Backported to 3.16:
- Assign positive error code to error variable
- Adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 2e64ff154c upstream.
When FUSE_OPEN returns ENOSYS, the no_open bit is set on the connection.
Because the FUSE_RELEASE and FUSE_RELEASEDIR paths share code, this
incorrectly caused the FUSE_RELEASEDIR request to be dropped and never sent
to userspace.
Pass an isdir bool to distinguish between FUSE_RELEASE and FUSE_RELEASEDIR
inside of fuse_file_put.
Fixes: 7678ac5061 ("fuse: support clients that don't implement 'open'")
Signed-off-by: Chad Austin <chadaustin@fb.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 267d84449f upstream.
struct fuse_file is stored in file->private_data. Make this always be a
counting reference for consistency.
This also allows fuse_sync_release() to call fuse_file_put() instead of
partially duplicating its functionality.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
[bwh: Backported to 3.16: force and background flags are bitfields]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit a538e3ff9d upstream.
Matthew pointed out that the ioctx_table is susceptible to spectre v1,
because the index can be controlled by an attacker. The below patch
should mitigate the attack for all of the aio system calls.
Reported-by: Matthew Wilcox <willy@infradead.org>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit c988de29ca upstream.
Make sure to use the CIFS_DIR_SEP(cifs_sb) as path separator for
prefixpath too. Fixes a bug with smb1 UNIX extensions.
Fixes: a6b5058faf ("fs/cifs: make share unaccessible at root level mountable")
Signed-off-by: Paulo Alcantara <palcantara@suse.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit ce96a407ad upstream.
hfs_bmap_free() frees the node via hfs_bnode_put(node). However, it
then reads node->this when dumping error message on an error path, which
may result in a use-after-free bug. This patch frees the node only when
it is never again used.
Link: http://lkml.kernel.org/r/1542963889-128825-1-git-send-email-bianpan2016@163.com
Fixes: a1185ffa2fc ("HFS rewrite")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Joe Perches <joe@perches.com>
Cc: Ernesto A. Fernandez <ernesto.mnd.fernandez@gmail.com>
Cc: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit ecebf55d27 upstream.
The function ext2_xattr_set calls brelse(bh) to drop the reference count
of bh. After that, bh may be freed. However, following brelse(bh),
it reads bh->b_data via macro HDR(bh). This may result in a
use-after-free bug. This patch moves brelse(bh) after reading field.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 2084ac6c50 upstream.
The function dentry_connected calls dput(dentry) to drop the previously
acquired reference to dentry. In this case, dentry can be released.
After that, IS_ROOT(dentry) checks the condition
(dentry == dentry->d_parent), which may result in a use-after-free bug.
This patch directly compares dentry with its parent obtained before
dropping the reference.
Fixes: a056cc8934c("exportfs: stop retrying once we race with
rename/remove")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 42a657f576 upstream.
The function relocate_block_group calls btrfs_end_transaction to release
trans when update_backref_cache returns 1, and then continues the loop
body. If btrfs_block_rsv_refill fails this time, it will jump out the
loop and the freed trans will be accessed. This may result in a
use-after-free bug. The patch assigns NULL to trans after trans is
released so that it will not be accessed.
Fixes: 0647bf564f ("Btrfs: improve forever loop when doing balance relocation")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 552f0329c7 upstream.
We have a race between enabling quotas end subvolume creation that cause
subvolume creation to fail with -EINVAL, and the following diagram shows
how it happens:
CPU 0 CPU 1
btrfs_ioctl()
btrfs_ioctl_quota_ctl()
btrfs_quota_enable()
mutex_lock(fs_info->qgroup_ioctl_lock)
btrfs_ioctl()
create_subvol()
btrfs_qgroup_inherit()
-> save fs_info->quota_root
into quota_root
-> stores a NULL value
-> tries to lock the mutex
qgroup_ioctl_lock
-> blocks waiting for
the task at CPU0
-> sets BTRFS_FS_QUOTA_ENABLED in fs_info
-> sets quota_root in fs_info->quota_root
(non-NULL value)
mutex_unlock(fs_info->qgroup_ioctl_lock)
-> checks quota enabled
flag is set
-> returns -EINVAL because
fs_info->quota_root was
NULL before it acquired
the mutex
qgroup_ioctl_lock
-> ioctl returns -EINVAL
Returning -EINVAL to user space will be confusing if all the arguments
passed to the subvolume creation ioctl were valid.
Fix it by grabbing the value from fs_info->quota_root after acquiring
the mutex.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 909e22e053 upstream.
Fix a static code checker warning:
fs/exportfs/expfs.c:171 reconnect_one() warn: passing zero to 'ERR_PTR'
The error path for lookup_one_len_unlocked failure
should set err to PTR_ERR.
Fixes: bbf7a8a356 ("exportfs: move most of reconnect_path to helper function")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit f505754fd6 upstream.
We were using the path name received from user space without checking that
it is null terminated. While btrfs-progs is well behaved and does proper
validation and null termination, someone could call the ioctl and pass
a non-null terminated patch, leading to buffer overrun problems in the
kernel. The ioctl is protected by CAP_SYS_ADMIN.
So just set the last byte of the path to a null character, similar to what
we do in other ioctls (add/remove/resize device, snapshot creation, etc).
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit f8397d69da upstream.
When a metadata read is served the endio routine btree_readpage_end_io_hook
is called which eventually runs the tree-checker. If tree-checker fails
to validate the read eb then it sets EXTENT_BUFFER_CORRUPT flag. This
leads to btree_read_extent_buffer_pages wrongly assuming that all
available copies of this extent buffer are wrong and failing prematurely.
Fix this modify btree_read_extent_buffer_pages to read all copies of
the data.
This failure was exhibitted in xfstests btrfs/124 which would
spuriously fail its balance operations. The reason was that when balance
was run following re-introduction of the missing raid1 disk
__btrfs_map_block would map the read request to stripe 0, which
corresponded to devid 2 (the disk which is being removed in the test):
item 2 key (FIRST_CHUNK_TREE CHUNK_ITEM 3553624064) itemoff 15975 itemsize 112
length 1073741824 owner 2 stripe_len 65536 type DATA|RAID1
io_align 65536 io_width 65536 sector_size 4096
num_stripes 2 sub_stripes 1
stripe 0 devid 2 offset 2156920832
dev_uuid 8466c350-ed0c-4c3b-b17d-6379b445d5c8
stripe 1 devid 1 offset 3553624064
dev_uuid 1265d8db-5596-477e-af03-df08eb38d2ca
This caused read requests for a checksum item that to be routed to the
stale disk which triggered the aforementioned logic involving
EXTENT_BUFFER_CORRUPT flag. This then triggered cascading failures of
the balance operation.
Fixes: a826d6dcb3 ("Btrfs: check items for correctness as we search")
Suggested-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[bwh: Backported to 3.16:
- Deleted code is slightly different
- Adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 21a446cf18 upstream.
If we exit the NFSv4 state manager due to a umount, then we can end up
leaving the NFS4CLNT_MANAGER_RUNNING flag set. If another mount causes
the nfs4_client to be rereferenced before it is destroyed, then we end
up never being able to recover state.
Fixes: 47c2199b6e ("NFSv4.1: Ensure state manager thread dies on last ...")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit c4b7d1ba7d upstream.
Fixes gcc '-Wunused-but-set-variable' warning:
fs/sysv/inode.c: In function '__sysv_write_inode':
fs/sysv/inode.c:239:6: warning:
variable 'err' set but not used [-Wunused-but-set-variable]
__sysv_write_inode should return 'err' instead of 0
Fixes: 05459ca81a ("repair sysv_write_inode(), switch sysv to simple_fsync()")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 7fabaf3034 upstream.
fuse_request_send_notify_reply() may fail if the connection was reset for
some reason (e.g. fs was unmounted). Don't leak request reference in this
case. Besides leaking memory, this resulted in fc->num_waiting not being
decremented and hence fuse_wait_aborted() left in a hanging and unkillable
state.
Fixes: 2d45ba381a ("fuse: add retrieve request")
Fixes: b8f95e5d13 ("fuse: umount should wait for all requests")
Reported-and-tested-by: syzbot+6339eda9cb4ebbc4c37b@syzkaller.appspotmail.com
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 9c8e0a1b68 upstream.
Timothy Baldwin <timbaldwin@fastmail.co.uk> wrote:
> As per mount_namespaces(7) unprivileged users should not be able to look under mount points:
>
> Mounts that come as a single unit from more privileged mount are locked
> together and may not be separated in a less privileged mount namespace.
>
> However they can:
>
> 1. Create a mount namespace.
> 2. In the mount namespace open a file descriptor to the parent of a mount point.
> 3. Destroy the mount namespace.
> 4. Use the file descriptor to look under the mount point.
>
> I have reproduced this with Linux 4.16.18 and Linux 4.18-rc8.
>
> The setup:
>
> $ sudo sysctl kernel.unprivileged_userns_clone=1
> kernel.unprivileged_userns_clone = 1
> $ mkdir -p A/B/Secret
> $ sudo mount -t tmpfs hide A/B
>
>
> "Secret" is indeed hidden as expected:
>
> $ ls -lR A
> A:
> total 0
> drwxrwxrwt 2 root root 40 Feb 12 21:08 B
>
> A/B:
> total 0
>
>
> The attack revealing "Secret":
>
> $ unshare -Umr sh -c "exec unshare -m ls -lR /proc/self/fd/4/ 4<A"
> /proc/self/fd/4/:
> total 0
> drwxr-xr-x 3 root root 60 Feb 12 21:08 B
>
> /proc/self/fd/4/B:
> total 0
> drwxr-xr-x 2 root root 40 Feb 12 21:08 Secret
>
> /proc/self/fd/4/B/Secret:
> total 0
I tracked this down to put_mnt_ns running passing UMOUNT_SYNC and
disconnecting all of the mounts in a mount namespace. Fix this by
factoring drop_mounts out of drop_collected_mounts and passing
0 instead of UMOUNT_SYNC.
There are two possible behavior differences that result from this.
- No longer setting UMOUNT_SYNC will no longer set MNT_SYNC_UMOUNT on
the vfsmounts being unmounted. This effects the lazy rcu walk by
kicking the walk out of rcu mode and forcing it to be a non-lazy
walk.
- No longer disconnecting locked mounts will keep some mounts around
longer as they stay because the are locked to other mounts.
There are only two users of drop_collected mounts: audit_tree.c and
put_mnt_ns.
In audit_tree.c the mounts are private and there are no rcu lazy walks
only calls to iterate_mounts. So the changes should have no effect
except for a small timing effect as the connected mounts are disconnected.
In put_mnt_ns there may be references from process outside the mount
namespace to the mounts. So the mounts remaining connected will
be the bug fix that is needed. That rcu walks are allowed to continue
appears not to be a problem especially as the rcu walk change was about
an implementation detail not about semantics.
Fixes: 5ff9d8a65c ("vfs: Lock in place mounts from more privileged users")
Reported-by: Timothy Baldwin <timbaldwin@fastmail.co.uk>
Tested-by: Timothy Baldwin <timbaldwin@fastmail.co.uk>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit df7342b240 upstream.
Jonathan Calmels from NVIDIA reported that he's able to bypass the
mount visibility security check in place in the Linux kernel by using
a combination of the unbindable property along with the private mount
propagation option to allow a unprivileged user to see a path which
was purposefully hidden by the root user.
Reproducer:
# Hide a path to all users using a tmpfs
root@castiana:~# mount -t tmpfs tmpfs /sys/devices/
root@castiana:~#
# As an unprivileged user, unshare user namespace and mount namespace
stgraber@castiana:~$ unshare -U -m -r
# Confirm the path is still not accessible
root@castiana:~# ls /sys/devices/
# Make /sys recursively unbindable and private
root@castiana:~# mount --make-runbindable /sys
root@castiana:~# mount --make-private /sys
# Recursively bind-mount the rest of /sys over to /mnnt
root@castiana:~# mount --rbind /sys/ /mnt
# Access our hidden /sys/device as an unprivileged user
root@castiana:~# ls /mnt/devices/
breakpoint cpu cstate_core cstate_pkg i915 intel_pt isa kprobe
LNXSYSTM:00 msr pci0000:00 platform pnp0 power software system
tracepoint uncore_arb uncore_cbox_0 uncore_cbox_1 uprobe virtual
Solve this by teaching copy_tree to fail if a mount turns out to be
both unbindable and locked.
Fixes: 5ff9d8a65c ("vfs: Lock in place mounts from more privileged users")
Reported-by: Jonathan Calmels <jcalmels@nvidia.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 25d202ed82 upstream.
It was recently pointed out that the one instance of testing MNT_LOCKED
outside of the namespace_sem is in ksys_umount.
Fix that by adding a test inside of do_umount with namespace_sem and
the mount_lock held. As it helps to fail fails the existing test is
maintained with an additional comment pointing out that it may be racy
because the locks are not held.
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Fixes: 5ff9d8a65c ("vfs: Lock in place mounts from more privileged users")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 45ae932d24 upstream.
bs.bh was taken in previous ext4_xattr_block_find() call,
it should be released before re-using
Fixes: 7e01c8e542 ("ext3/4: fix uninitialized bs in ...")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 9e463084cd upstream.
Fixes: bfe0a5f47a ("ext4: add more mount time checks of the superblock")
Reported-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit ac765f83f1 upstream.
We currently allow cloning a range from a file which includes the last
block of the file even if the file's size is not aligned to the block
size. This is fine and useful when the destination file has the same size,
but when it does not and the range ends somewhere in the middle of the
destination file, it leads to corruption because the bytes between the EOF
and the end of the block have undefined data (when there is support for
discard/trimming they have a value of 0x00).
Example:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ export foo_size=$((256 * 1024 + 100))
$ xfs_io -f -c "pwrite -S 0x3c 0 $foo_size" /mnt/foo
$ xfs_io -f -c "pwrite -S 0xb5 0 1M" /mnt/bar
$ xfs_io -c "reflink /mnt/foo 0 512K $foo_size" /mnt/bar
$ od -A d -t x1 /mnt/bar
0000000 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5
*
0524288 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c
*
0786528 3c 3c 3c 3c 00 00 00 00 00 00 00 00 00 00 00 00
0786544 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*
0790528 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5
*
1048576
The bytes in the range from 786532 (512Kb + 256Kb + 100 bytes) to 790527
(512Kb + 256Kb + 4Kb - 1) got corrupted, having now a value of 0x00 instead
of 0xb5.
This is similar to the problem we had for deduplication that got recently
fixed by commit de02b9f6bb ("Btrfs: fix data corruption when
deduplicating between different files").
Fix this by not allowing such operations to be performed and return the
errno -EINVAL to user space. This is what XFS is doing as well at the VFS
level. This change however now makes us return -EINVAL instead of
-EOPNOTSUPP for cases where the source range maps to an inline extent and
the destination range's end is smaller then the destination file's size,
since the detection of inline extents is done during the actual process of
dropping file extent items (at __btrfs_drop_extents()). Returning the
-EINVAL error is done early on and solely based on the input parameters
(offsets and length) and destination file's size. This makes us consistent
with XFS and anyone else supporting cloning since this case is now checked
at a higher level in the VFS and is where the -EINVAL will be returned
from starting with kernel 4.20 (the VFS changed was introduced in 4.20-rc1
by commit 07d19dc9fb ("vfs: avoid problematic remapping requests into
partial EOF block"). So this change is more geared towards stable kernels,
as it's unlikely the new VFS checks get removed intentionally.
A test case for fstests follows soon, as well as an update to filter
existing tests that expect -EOPNOTSUPP to accept -EINVAL as well.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 506481b20e upstream.
When the cow_file_range fails, the related resources are unlocked
according to the range [start..end), so the unlock cannot be repeated in
run_delalloc_nocow.
In some cases (e.g. cur_offset <= end && cow_start != -1), cur_offset is
not updated correctly, so move the cur_offset update before
cow_file_range.
kernel BUG at mm/page-writeback.c:2663!
Internal error: Oops - BUG: 0 [#1] SMP
CPU: 3 PID: 31525 Comm: kworker/u8:7 Tainted: P O
Hardware name: Realtek_RTD1296 (DT)
Workqueue: writeback wb_workfn (flush-btrfs-1)
task: ffffffc076db3380 ti: ffffffc02e9ac000 task.ti: ffffffc02e9ac000
PC is at clear_page_dirty_for_io+0x1bc/0x1e8
LR is at clear_page_dirty_for_io+0x14/0x1e8
pc : [<ffffffc00033c91c>] lr : [<ffffffc00033c774>] pstate: 40000145
sp : ffffffc02e9af4f0
Process kworker/u8:7 (pid: 31525, stack limit = 0xffffffc02e9ac020)
Call trace:
[<ffffffc00033c91c>] clear_page_dirty_for_io+0x1bc/0x1e8
[<ffffffbffc514674>] extent_clear_unlock_delalloc+0x1e4/0x210 [btrfs]
[<ffffffbffc4fb168>] run_delalloc_nocow+0x3b8/0x948 [btrfs]
[<ffffffbffc4fb948>] run_delalloc_range+0x250/0x3a8 [btrfs]
[<ffffffbffc514c0c>] writepage_delalloc.isra.21+0xbc/0x1d8 [btrfs]
[<ffffffbffc516048>] __extent_writepage+0xe8/0x248 [btrfs]
[<ffffffbffc51630c>] extent_write_cache_pages.isra.17+0x164/0x378 [btrfs]
[<ffffffbffc5185a8>] extent_writepages+0x48/0x68 [btrfs]
[<ffffffbffc4f5828>] btrfs_writepages+0x20/0x30 [btrfs]
[<ffffffc00033d758>] do_writepages+0x30/0x88
[<ffffffc0003ba0f4>] __writeback_single_inode+0x34/0x198
[<ffffffc0003ba6c4>] writeback_sb_inodes+0x184/0x3c0
[<ffffffc0003ba96c>] __writeback_inodes_wb+0x6c/0xc0
[<ffffffc0003bac20>] wb_writeback+0x1b8/0x1c0
[<ffffffc0003bb0f0>] wb_workfn+0x150/0x250
[<ffffffc0002b0014>] process_one_work+0x1dc/0x388
[<ffffffc0002b02f0>] worker_thread+0x130/0x500
[<ffffffc0002b6344>] kthread+0x10c/0x110
[<ffffffc000284590>] ret_from_fork+0x10/0x40
Code: d503201f a9025bb5 a90363b7 f90023b9 (d4210000)
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Robbie Ko <robbieko@synology.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit cea5794122 upstream.
Fixes: 33afdcc540 ("ext4: add a function which sets up group blocks ...")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 9e4028935c upstream.
Currently bh is set to NULL only during first iteration of for cycle,
then this pointer is not cleared after end of using.
Therefore rollback after errors can lead to extra brelse(bh) call,
decrements bh counter and later trigger an unexpected warning in __brelse()
Patch moves brelse() calls in body of cycle to exclude requirement of
brelse() call in rollback.
Fixes: 33afdcc540 ("ext4: add a function which sets up group blocks ...")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 29aa30167a upstream.
Somehow, file system metadata was corrupted, which causes
ocfs2_check_dir_entry() to fail in function ocfs2_dir_foreach_blk_el().
According to the original design intention, if above happens we should
skip the problematic block and continue to retrieve dir entry. But
there is obviouse misuse of brelse around related code.
After failure of ocfs2_check_dir_entry(), current code just moves to
next position and uses the problematic buffer head again and again
during which the problematic buffer head is released for multiple times.
I suppose, this a serious issue which is long-lived in ocfs2. This may
cause other file systems which is also used in a the same host insane.
So we should also consider about bakcporting this patch into linux
-stable.
Link: http://lkml.kernel.org/r/HK2PR06MB045211675B43EED794E597B6D56E0@HK2PR06MB0452.apcprd06.prod.outlook.com
Signed-off-by: Changwei Ge <ge.changwei@h3c.com>
Suggested-by: Changkuo Shi <shi.changkuo@h3c.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 926674de67 upstream.
Some servers (e.g. Azure) do not include a spnego blob in the SMB3
negotiate protocol response, so on kerberos mounts ("sec=krb5")
we can fail, as we expected the server to list its supported
auth types (OIDs in the spnego blob in the negprot response).
Change this so that on krb5 mounts we default to trying krb5 if the
server doesn't list its supported protocol mechanisms.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 672ca9dd13 upstream.
It is possible for corrupted filesystem images to produce very large
block offsets that may wrap when a length is added, and wrongly pass
the buffer size test.
Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 93f38b6fae upstream.
printk format used %*s instead of %.*s, so hostname_len does not limit
the number of bytes accessed from hostname.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 1e77a8c204 upstream.
If backupuid mount option is sent, we can incorrectly retry
(on access denied on query info) with a cifs (FindFirst) operation
on an smb3 mount which causes the server to force the session close.
We set backup intent on open so no need for this fallback.
See kernel bugzilla 201435
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 2c887635cd upstream.
Currently, "echo 0 > /proc/fs/cifs/Stats" resets all of the stats
except the session and share reconnect counts. Fix it to
reset those as well.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 41657e5507 upstream.
The addition of FIBT, RMAP and REFCOUNT changed the offsets into
__xfssats structure.
This caused xqmstat_proc_show() to display garbage data via
/proc/fs/xfs/xqmstat, once it relies on the offsets marked via macros.
Fix it.
Fixes: 00f4e4f9 xfs: add rmap btree stats infrastructure
Fixes: aafc3c24 xfs: support the XFS_BTNUM_FINOBT free inode btree type
Fixes: 46eeb521 xfs: introduce refcount btree definitions
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
[bwh: Backported to 3.16:
- Only the FIBT stats have been added, so start from XFSSTAT_END_FIBT_V2
- Adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 3527a018c0 upstream.
At inode.c:compress_file_range(), under the "free_pages_out" label, we can
end up dereferencing the "pages" pointer when it has a NULL value. This
case happens when "start" has a value of 0 and we fail to allocate memory
for the "pages" pointer. When that happens we jump to the "cont" label and
then enter the "if (start == 0)" branch where we immediately call the
cow_file_range_inline() function. If that function returns 0 (success
creating an inline extent) or an error (like -ENOMEM for example) we jump
to the "free_pages_out" label and then access "pages[i]" leading to a NULL
pointer dereference, since "nr_pages" has a value greater than zero at
that point.
Fix this by setting "nr_pages" to 0 when we fail to allocate memory for
the "pages" pointer.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201119
Fixes: 771ed689d2 ("Btrfs: Optimize compressed writeback and reads")
Reviewed-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 92e2921f7e upstream.
When an invalid mount option is passed to jffs2, jffs2_parse_options()
will fail and jffs2_sb_info will be freed, but then jffs2_sb_info will
be used (use-after-free) and freeed (double-free) in jffs2_kill_sb().
Fix it by removing the buggy invocation of kfree() when getting invalid
mount options.
Fixes: 92abc475d8 ("jffs2: implement mount option parsing and compression overriding")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 7703bdd8d2 upstream.
During buffered writes, we follow this basic series of steps:
again:
lock all the pages
wait for writeback on all the pages
Take the extent range lock
wait for ordered extents on the whole range
clean all the pages
if (copy_from_user_in_atomic() hits a fault) {
drop our locks
goto again;
}
dirty all the pages
release all the locks
The extra waiting, cleaning and locking are there to make sure we don't
modify pages in flight to the drive, after they've been crc'd.
If some of the pages in the range were already dirty when the write
began, and we need to goto again, we create a window where a dirty page
has been cleaned and unlocked. It may be reclaimed before we're able to
lock it again, which means we'll read the old contents off the drive and
lose any modifications that had been pending writeback.
We don't actually need to clean the pages. All of the other locking in
place makes sure we don't start IO on the pages, so we can just leave
them dirty for the duration of the write.
Fixes: 73d59314e6 (the original btrfs merge)
Signed-off-by: Chris Mason <clm@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[bwh: Backported to 3.16:
- Keep passing additional argument of GFP_NOFS to clear_extent_bit()
- Adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 3aa7c7a31c upstream.
While testing my backport I noticed there was a panic if I ran
generic/416 generic/417 generic/418 all in a row. This just happened to
uncover a race where we had outstanding IO after we destroy all of our
workqueues, and then we'd go to queue the endio work on those free'd
workqueues.
This is because we aren't waiting for the caching threads to be done
before freeing everything up, so to fix this make sure we wait on any
outstanding caching that's being done before we free up the block group,
so we're sure to be done with all IO by the time we get to
btrfs_stop_all_workers(). This fixes the panic I was seeing
consistently in testing.
------------[ cut here ]------------
kernel BUG at fs/btrfs/volumes.c:6112!
SMP PTI
Modules linked in:
CPU: 1 PID: 27165 Comm: kworker/u4:7 Not tainted 4.16.0-02155-g3553e54a578d-dirty #875
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
Workqueue: btrfs-cache btrfs_cache_helper
RIP: 0010:btrfs_map_bio+0x346/0x370
RSP: 0000:ffffc900061e79d0 EFLAGS: 00010202
RAX: 0000000000000000 RBX: ffff880071542e00 RCX: 0000000000533000
RDX: ffff88006bb74380 RSI: 0000000000000008 RDI: ffff880078160000
RBP: 0000000000000001 R08: ffff8800781cd200 R09: 0000000000503000
R10: ffff88006cd21200 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: ffff8800781cd200 R15: ffff880071542e00
FS: 0000000000000000(0000) GS:ffff88007fd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000817ffc4 CR3: 0000000078314000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
btree_submit_bio_hook+0x8a/0xd0
submit_one_bio+0x5d/0x80
read_extent_buffer_pages+0x18a/0x320
btree_read_extent_buffer_pages+0xbc/0x200
? alloc_extent_buffer+0x359/0x3e0
read_tree_block+0x3d/0x60
read_block_for_search.isra.30+0x1a5/0x360
btrfs_search_slot+0x41b/0xa10
btrfs_next_old_leaf+0x212/0x470
caching_thread+0x323/0x490
normal_work_helper+0xc5/0x310
process_one_work+0x141/0x340
worker_thread+0x44/0x3c0
kthread+0xf8/0x130
? process_one_work+0x340/0x340
? kthread_bind+0x10/0x10
ret_from_fork+0x35/0x40
RIP: btrfs_map_bio+0x346/0x370 RSP: ffffc900061e79d0
---[ end trace 827eb13e50846033 ]---
Kernel panic - not syncing: Fatal exception
Kernel Offset: disabled
---[ end Kernel panic - not syncing: Fatal exception
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 5c06147128 upstream.
When we fail to start a transaction in btrfs_dev_replace_start, we leave
dev_replace->replace_start set to STARTED but clear ->srcdev and
->tgtdev. Later, that can result in an Oops in
btrfs_dev_replace_progress when having state set to STARTED or SUSPENDED
implies that ->srcdev is valid.
Also fix error handling when the state is already STARTED or SUSPENDED
while starting. That, too, will clear ->srcdev and ->tgtdev even though
it doesn't own them. This should be an impossible case to hit since we
should be protected by the BTRFS_FS_EXCL_OP bit being set. Let's add an
ASSERT there while we're at it.
Fixes: e93c89c1aa (Btrfs: add new sources for device replace code)
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 33458eaba4 upstream.
It's possible for ext4_show_quota_options() to try reading
s_qf_names[i] while it is being modified by ext4_remount() --- most
notably, in ext4_remount's error path when the original values of the
quota file name gets restored.
Reported-by: syzbot+a2872d6feea6918008a9@syzkaller.appspotmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
[bwh: Backported to 3.16:
- s/EXT4_MAXQUOTAS/MAXQUOTAS/
- Adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 625ef8a3ac upstream.
Variable retries is not initialized in ext4_da_write_inline_data_begin()
which can lead to nondeterministic number of retries in case we hit
ENOSPC. Initialize retries to zero as we do everywhere else.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fixes: bc0ca9df3b ("ext4: retry allocation when inline->extent conversion failed")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
commit 18aded1749 upstream.
The code EXT4_IOC_SWAP_BOOT ioctl hasn't been updated in a while, and
it's a bit broken with respect to more modern ext4 kernels, especially
metadata checksums.
Other problems fixed with this commit:
* Don't allow installing a DAX, swap file, or an encrypted file as a
boot loader.
* Respect the immutable and append-only flags.
* Wait until any DIO operations are finished *before* calling
truncate_inode_pages().
* Don't swap inode->i_flags, since these flags have nothing to do with
the inode blocks --- and it will give the IMA/audit code heartburn
when the inode is evicted.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reported-by: syzbot+e81ccd4744c6c4f71354@syzkaller.appspotmail.com
[bwh: Backported to 3.16:
- Drop IS_ENCRYPTED() check
- Adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
