commit 518417525f upstream.
All manipulations of the gem_object list need to be protected by
the list mutex, as GEM objects can be created and freed in parallel.
This fixes a kernel memory corruption.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5a642e6bc4 upstream.
If the gpu submit fails, bail out to avoid accessing a potentially
unititalized fence.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8206085487 upstream.
Fixes a hibernation regression on APUs.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=191571
Fixes: 274ad65c9d (drm/radeon: hard reset r600 and newer GPU when hibernating.)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4cf97582b4 upstream.
Several users have complained that the tile table update broke Oland
support. Despite several attempts to fix it, the root cause is still
unknown at this point and no solution is available. As it is not
acceptable to leave a known regression breaking a major functionality
in the kernel for several releases, let's just reverse this
optimization for now. It can be implemented again later if and only
if the breakage is understood and fixed.
As there were no complaints for Hainan so far, only the Oland part of
the offending commit is reverted. Optimization is preserved on
Hainan, so this commit isn't an actual revert of the original.
This fixes bug #194761:
https://bugzilla.kernel.org/show_bug.cgi?id=194761
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: f8d9422ef8 ("drm/amdgpu: update tile table for oland/hainan")
Cc: Flora Cui <Flora.Cui@amd.com>
Cc: Junwei Zhang <Jerry.Zhang@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit abeae421b0 upstream.
This reverts commit bbdf0b2ff3 ("drm/i915/bxt: Disable device ready
before shutdown command").
Disable device ready before shutdown command was added previously to
avoid a split screen issue seen on dual link DSI panels. As of now, dual
link is not supported and will need some rework in the upstream
code. For single link DSI panels, the change is not required. This will
cause failure in sending SHUTDOWN packet during disable. Hence reverting
the change. Will handle the change as part of dual link enabling in
upstream.
Fixes: bbdf0b2ff3 ("drm/i915/bxt: Disable device ready before shutdown command")
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1504604671-17237-1-git-send-email-vidya.srinivas@intel.com
(cherry picked from commit 33c8d8870c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7b4dc3c0da upstream.
Looking at our virtual PCI device, we can see surprising Region 4 and Region 5.
00:10.0 VGA compatible controller: Intel Corporation Sky Lake Integrated Graphics (rev 06) (prog-if 00 [VGA controller])
....
Region 0: Memory at 140000000 (64-bit, non-prefetchable) [size=16M]
Region 2: Memory at 180000000 (64-bit, prefetchable) [size=1G]
Region 4: Memory at <ignored> (32-bit, non-prefetchable)
Region 5: Memory at <ignored> (32-bit, non-prefetchable)
Expansion ROM at febd6000 [disabled] [size=2K]
The fact is that we only implemented BAR0 and BAR2. Surprising Region 4 and
Region 5 are shown because we report their size as 0xffffffff. They should
report size 0 instead.
BTW, the physical GPU has a PIO BAR. GVTg hasn't implemented PIO access, so
we ignored this BAR for vGPU device.
v2: fix BAR size value calculation.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1458032
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
(cherry picked from commit f1751362d6)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5baf6bb0fd upstream.
Commit 48a9291672 ("drm/exynos: use drm_for_each_connector_iter()")
replaced unsafe drm_for_each_connector() with drm_for_each_connector_iter()
and removed surrounding drm_modeset_lock calls. However, that lock was
there not only to protect unsafe drm_for_each_connector(), but it was also
required to be held by the dpms code which was called from the loop body.
This patch restores those drm_modeset_lock calls to fix broken suspend
and resume of Exynos DRM subsystem in v4.13 kernel.
Fixes: 48a9291672 ("drm/exynos: use drm_for_each_connector_iter()")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 813a7e1604 upstream.
Make it more clear that post commit return ret is really return 0,
and add a missing drm_atomic_helper_cleanup_planes when
drm_atomic_helper_wait_for_fences fails.
Fixes: 839ca903f1 ("drm/nouveau/kms/nv50: transition to atomic interfaces internally")
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170711143314.2148-2-maarten.lankhorst@linux.intel.com
Reviewed-by: Sean Paul <seanpaul@chromium.org>
[mlankhorst: Use if (ret) to remove the goto in success case.]
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bc60c90f47 upstream.
It appears that MSI does not work on either G5 PPC nor on a E5500-based
platform, where other hardware is reported to work fine with MSI.
Both tests were conducted with NV4x hardware, so perhaps other (or even
this) hardware can be made to work. It's still possible to force-enable
with config=NvMSI=1 on load.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9afae27192 upstream.
When fail to get needed page for pool, need to put allocated pages
into pool. But current code has a miscalculation of allocated pages,
correct it.
Signed-off-by: Xiangliang.Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 71bb23c707 upstream.
When the caller maps their dmabuf and we return an sg_table, the caller
doesn't expect the pages beneath that sg_table to vanish on a whim (i.e.
under mempressure). The contract is that the pages are pinned for the
duration of the mapping (from dma_buf_map_attachment() to
dma_buf_unmap_attachment). To comply, we need to introduce our own
vgem_object.pages_pin_count and elevate it across the mapping. However,
the drm_prime interface we use calls drv->prime_pin on dma_buf_attach
and drv->prime_unpin on dma_buf_detach, which while that does cover the
mapping is much broader than is desired -- but it will do for now.
v2: also hold the pin across prime_vmap/vunmap
Reported-by: Tomi Sarvela <tomi.p.sarvela@intel.com>
Testcase: igt/gem_concurrent_blit/*swap*vgem*
Fixes: 5ba6c9ff96 ("drm/vgem: Fix mmaping")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tomi Sarvela <tomi.p.sarvela@intel.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: <stable@vger.kernel.org> # needs a backport
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170622134617.17912-1-chris@chris-wilson.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Calls to mmu_notifier_invalidate_page() were replaced by calls to
mmu_notifier_invalidate_range() and are now bracketed by calls to
mmu_notifier_invalidate_range_start()/end()
Remove now useless invalidate_page callback.
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
vmwgfx currently cannot support non-blocking commit because when
vmw_*_crtc_page_flip is called, drm_atomic_nonblocking_commit()
schedules the update on a thread. This means vmw_*_crtc_page_flip
cannot rely on the new surface being bound before the subsequent
dirty and flush operations happen.
Cc: <stable@vger.kernel.org> # 4.12.x
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Core Changes:
- Release driver tracking before making the object available again (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
* tag 'drm-misc-fixes-2017-08-24' of git://anongit.freedesktop.org/git/drm-misc:
drm: Release driver tracking before making the object available again
drm/i915 fixes for v4.13-rc7
* tag 'drm-intel-fixes-2017-08-24' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915/gvt: Fix the kernel null pointer error
drm/i915: Clear lost context-switch interrupts across reset
drm/i915/bxt: use NULL for GPIO connection ID
drm/i915/cnl: Fix LSPCON support.
drm/i915/vbt: ignore extraneous child devices for a port
drm/i915: Initialize 'data' in intel_dsi_dcs_backlight.c
Function sii8620_mt_read_devcap_reg_recv() used to read array index
from a wrong msg register, which caused writing out of array
bounds. It led to writing on other fields of struct sii8620.
Signed-off-by: Maciej Purski <m.purski@samsung.com>
Fixes: e9c6da270 ("drm/bridge/sii8620: add reading device capability
registers")
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1503311571-25819-1-git-send-email-m.purski@samsung.com
once error happens in shadow_indirect_ctx function, the variable
wa_ctx->indirect_ctx.obj is not initialized but accessed, so the
kernel null point panic occurs.
Fixes: 894cf7d156 ("drm/i915/gvt: i915_gem_object_create() returns an error pointer")
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: fred gao <fred.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
This is the same bug as we fixed in commit f6cd7daecf ("drm: Release
driver references to handle before making it available again"), but now
the exposure is via the PRIME lookup tables. If we remove the
object/handle from the PRIME lut, then a new request for the same
object/fd will generate a new handle, thus for a short window that
object is known to userspace by two different handles. Fix this by
releasing the driver tracking before PRIME.
Fixes: 0ff926c7d4 ("drm/prime: add exported buffers to current fprivs
imported buffer list (v2)")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: stable@vger.kernel.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170819120558.6465-1-chris@chris-wilson.co.uk
Core Changes:
- Fix framebuffer leak in setplane error condition (Nikil)
- Prevent BUG in atomic_ioctl by properly resetting state on EDEADLK (Maarten)
- Add missing return in atomic_check_only if atomic_check fails (Maarten)
Driver Changes:
- rockchip: Don't try to suspend if device not initialized (Jeffy)
Cc: Jeffy Chen <jeffy.chen@rock-chips.com>
Cc: Nikhil Mahale <nmahale@nvidia.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
* tag 'drm-misc-fixes-2017-08-18' of git://anongit.freedesktop.org/git/drm-misc:
drm/atomic: If the atomic check fails, return its value first
drm/atomic: Handle -EDEADLK with out-fences correctly
drm: Fix framebuffer leak
drm/rockchip: Fix suspend crash when drm is not bound
- Enable color space conversion on the primary plane when the framebuffer
format is a YUV format.
- The IPUv3 base driver now uses drm_format_info in the PRE/PRG code. The
PRE/PRG parts are already disabled if DRM is not available. Enforce that
if DRM is built as a module, IPUv3 must be built as a module, too.
-----BEGIN PGP SIGNATURE-----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=nO8q
-----END PGP SIGNATURE-----
Merge tag 'imx-drm-fixes-2017-08-18' of git://git.pengutronix.de/git/pza/linux into drm-fixes
drm/imx: fix YUV primary plane and IPUv3 build corner case
- Enable color space conversion on the primary plane when the framebuffer
format is a YUV format.
- The IPUv3 base driver now uses drm_format_info in the PRE/PRG code. The
PRE/PRG parts are already disabled if DRM is not available. Enforce that
if DRM is built as a module, IPUv3 must be built as a module, too.
* tag 'imx-drm-fixes-2017-08-18' of git://git.pengutronix.de/git/pza/linux:
drm/imx: ipuv3-plane: fix YUV framebuffer scanout on the base plane
gpu: ipu-v3: add DRM dependency
A single commit to restore the framebuffer console when there's no DRM
users left.
-----BEGIN PGP SIGNATURE-----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=bwwk
-----END PGP SIGNATURE-----
Merge tag 'sunxi-drm-fixes-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-fixes
Allwinner DRM fixes for 4.13
A single commit to restore the framebuffer console when there's no DRM
users left.
* tag 'sunxi-drm-fixes-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
drm/sun4i: Implement drm_driver lastclose to restore fbdev console
During a global reset, we disable the irq. As we disable the irq, the
hardware may be raising a GT interrupt that we then ignore, leaving it
pending in the GTIIR. After the reset, we then re-enable the irq,
triggering the pending interrupt. However, that interrupt was for the
stale state from before the reset, and the contents of the CSB buffer
are now invalid.
v2: Add a comment to make it clear that the double clear is purely my
paranoia.
Reported-by: "Dong, Chuanxiao" <chuanxiao.dong@intel.com>
Fixes: 821ed7df6e ("drm/i915: Update reset path to fix incomplete requests")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: "Dong, Chuanxiao" <chuanxiao.dong@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170807121919.30165-1-chris@chris-wilson.co.uk
Link: https://patchwork.freedesktop.org/patch/msgid/20170818090509.5363-1-chris@chris-wilson.co.uk
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
(cherry picked from commit 64f09f00ca)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The commit 213e08ad60
("drm/i915/bxt: add bxt dsi gpio element support")
enables GPIO support for Broxton based platforms.
While using that API we might get into troubles in the future, because
we can't rely on label name in the driver since vendor firmware might
provide any GPIO pin there, e.g. "reset", and even mark it in _DSD (in
which case the request will fail).
To avoid inconsistency and potential issues we have two options:
a) generate GPIO ACPI mapping table and supply it via
acpi_dev_add_driver_gpios(), or
b) just pass NULL as connection ID.
The b) approach is much simpler and would work since the driver relies
on GPIO indices only. Moreover, the _CRS fallback mechanism, when
requesting GPIO, has been made stricter, and supplying non-NULL
connection ID when neither _DSD, nor GPIO ACPI mapping is present, is
making request fail.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101921
Fixes: f10e4bf663 ("gpio: acpi: Even more tighten up ACPI GPIO lookups")
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Tested-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170817105541.63914-1-andriy.shevchenko@linux.intel.com
(cherry picked from commit cd55a1fbd2)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
When LSPCON support was extended to CNL
one part was missed on lspcon_init.
So, instead of adding check per platform on lspcon_init
let's use HAS_LSPCON that is already there for that
purpose.
Fixes: ff15947e0f ("drm/i915/cnl: LSPCON support is gen9+")
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170816030403.11368-1-rodrigo.vivi@intel.com
(cherry picked from commit acf58d4e96)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Ever since we've parsed VBT child devices, starting from 6acab15a7b
("drm/i915: use the HDMI DDI buffer translations from VBT"), we've
ignored the child device information if more than one child device
references the same port. The rationale for this seems lost in time.
Since commit 311a20949f ("drm/i915: don't init DP or HDMI when not
supported by DDI port") we started using this information more to skip
HDMI/DP init if the port wasn't there per VBT child devices. However, at
the same time it added port defaults without further explanation.
Thus, if the child device info was skipped due to multiple child devices
referencing the same port, the device info would be retrieved from the
somewhat arbitrary defaults.
Finally, when commit bb1d132935 ("drm/i915/vbt: split out defaults
that are set when there is no VBT") stopped initializing the defaults
whenever VBT is present, thus trusting the VBT more, we stopped
initializing ports which were referenced by more than one child device.
Apparently at least Asus UX305UA, UX305U, and UX306U laptops have VBT
child device blocks which cause this behaviour. Arguably they were
shipped with a broken VBT.
Relax the rules for multiple references to the same port, and use the
first child device info to reference a port. Retain the logic to debug
log about this, though.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101745
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196233
Fixes: bb1d132935 ("drm/i915/vbt: split out defaults that are set when there is no VBT")
Tested-by: Oliver Weißbarth <mail@oweissbarth.de>
Reported-by: Oliver Weißbarth <mail@oweissbarth.de>
Reported-by: Didier G <didierg-divers@orange.fr>
Reported-by: Giles Anderson <agander@gmail.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: <stable@vger.kernel.org> # v4.12+
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170811113907.6716-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit b5273d7275)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
variable 'data' may be used uninitialized in this function. thus,
'function dcs_get_backlight' will return unwanted value/fail.
Thus, adding NULL initialized to 'data' variable will solve the return
failure happening.
v2: Change commit message to reflect upstream with proper message
Fixes: 90198355b8 ("drm/i915/dsi: Add DCS control for Panel PWM")
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Yetunde Adebisi <yetundex.adebisi@intel.com>
Cc: Deepak M <m.deepak@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Balasubramaniam, Hari Chand <hari.chand.balasubramaniam@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1502762746-191826-1-git-send-email-hari.chand.balasubramaniam@intel.com
(cherry picked from commit d59814a5b4)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
update the list first to avoid redundant checks.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
... using the biggest hammer we have. This is essentially a weaponized
version of the timeout-based wedging Chris added in
commit 36703e79a9
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Thu Jun 22 11:56:25 2017 +0100
drm/i915: Break modeset deadlocks on reset
Because defense-in-depth is good it's good to still have both. Also
note that with the locking change we can now restrict this a lot (old
gpus and special testing only), so this doesn't kill the TDR benefits
on at least anything remotely modern.
And futuremore with a few tricks it should be possible to make a much
more educated guess about whether an atomic commit is stuck waiting on
the gpu (atomic_t counting the pending i915_sw_fence used by the
atomic modeset code should do it), so we can improve this.
But for now just start with something that is guaranteed to recover
faster, for much better CI througput.
This defacto reverts TDR on these platforms, but there's not really a
single commit to specify as the sole offender.
v2: Add a debug message to explain what's going on. We can't DRM_ERROR
because that spams CI. And the timeout based fallback still prints a
DRM_ERROR, in case something goes wrong.
v3: Fix comment layout (Michel)
Fixes: 4680816be3 ("drm/i915: Wait first for submission, before waiting for request completion")
Fixes: 221fe79945 ("drm/i915: Perform a direct reset of the GPU from the waiter")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> (v2)
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> (v2)
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170808080828.23650-1-daniel.vetter@ffwll.ch
(cherry picked from commit 97154ec242)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
When switching between contexts using the aliasing_ppgtt, the VM is
shared. We don't need to reload the PD registers unless they are dirty.
Martin Peres reported an issue that looks like corruption between
Haswell context switches, bisecting to commit f9326be5f1 ("drm/i915:
Rearrange switch_context to load the aliasing ppgtt on first use").
Switching between the same mm (the aliasing_ppgtt is used for all
contexts in this case) should be a nop, but appears to trigger some
side-effects in the context switch. However, as we know the switch
is redundant in this case, we can skip it and continue to ignore the
issue until somebody feels strong enough to investigate full-ppgtt on
gen7 again!
Except.. Martin was using full-ppgtt which is not supported as it
doesn't work correctly yet. So whilst the bisect did yield valuable
information about the failures, the fix should not have any user impact
under default settings, with the exception of a slightly lower
throughput on xcs as the VM would always be reloaded.
v2: Also remember to set the legacy_active_context following the switch
on xcs (commit e8a9c58fcd ("drm/i915: Unify active context tracking
between legacy/execlists/guc"))
Fixes: f9326be5f1 ("drm/i915: Rearrange switch_context to load the aliasing ppgtt on first use")
Fixes: e8a9c58fcd ("drm/i915: Unify active context tracking between legacy/execlists/guc")
Reported-by: Martin Peres <martin.peres@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170812152724.6883-1-chris@chris-wilson.co.uk
(cherry picked from commit 12124bea5b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
For 0.85V cnl_get_buf_trans_edp() returns the DP table, instead of EDP.
Use the correct table.
The error was pointed out by this clang warning:
drivers/gpu/drm/i915/intel_ddi.c:392:39: warning: variable
'cnl_ddi_translations_edp_0_85V' is not needed and will not be emitted
[-Wunneeded-internal-declaration]
static const struct cnl_ddi_buf_trans cnl_ddi_translations_edp_0_85V[] = {
Fixes: cf54ca8bc5 ("drm/i915/cnl: Implement voltage swing sequence.")
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170717195854.192139-1-mka@chromium.org
(cherry picked from commit 50946c8985)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
A missing part to EU slice power gating is the
debugfs interface. This patch actually should have been
squashed to the initial EU slice power gating one.
v2: Initial patch was merged without this part.
Fixes: c7ae7e9ab2 ("drm/i915/cnl: Configure EU slice power gating.")
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170809200702.11236-1-rodrigo.vivi@intel.com
(cherry picked from commit 7ea1adf30f)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
As we may have just bound the renderstate into the GGTT for execution, we
need to ensure that the GTT TLB are also flushed.
On snb-gt2, this would cause a random GPU hang at the start of a new
context (e.g. boot) and on snb-gt1, it was causing the renderstate batch
to take ~10s. It was the GPU hang that revealed the truth, as the CS
gleefully executed beyond the end of the golden renderstate batch, a good
indicator for a GTT TLB miss.
Fixes: 20fe17aa52 ("drm/i915: Remove redundant TLB invalidate on switching contexts")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20170808131904.1385-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.12-rc1+
(cherry picked from commit 802673d66f)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
complete_crtc_signaling is freeing fence_state, but when retrying
num_fences and fence_state are not zero'd. This caused duplicate
fd's in the fence_state array, followed by a BUG_ON in fs/file.c
because we reallocate freed memory, and installing over an existing
fd, or potential other fun.
Zero fence_state and num_fences correctly in the retry loop, which
allows kms_atomic_transition to pass.
Fixes: beaf5af480 ("drm/fence: add out-fences support")
Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Cc: Brian Starkey <brian.starkey@arm.com> (v10)
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.10+
Testcase: kms_atomic_transitions.plane-all-modeset-transition-fencing
(with CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y)
Link: https://patchwork.freedesktop.org/patch/msgid/20170814100721.13340-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> #intel-gfx on irc
Historically, only RGB framebuffers could be assigned to the primary
plane. This changed with universal plane support. Since no colorspace
conversion was set up for the IPUv3 full plane, assigning YUV frame
buffers to the primary plane caused incorrect output.
Fix this by enabling color space conversion also for the primary plane.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Fixes hitting WARN_ON() during initialisation of pre-NV50 GPUs, caused
by the recent changes to support pad macro routing on GM20x.
We currently don't use them here for older GPUs anyway.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Default config value for all other drivers is N.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
drm/i915 fixes for v4.13-rc5
* tag 'drm-intel-fixes-2017-08-09-1' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: fix backlight invert for non-zero minimum brightness
drm/i915/shrinker: Wrap need_resched() inside preempt-disable
drm/i915/perf: fix flex eu registers programming
drm/i915: Fix out-of-bounds array access in bdw_load_gamma_lut
drm/i915/gvt: Change the max length of mmio_reg_rw from 4 to 8
drm/i915/gvt: Initialize MMIO Block with HW state
drm/i915/gvt: clean workload queue if error happened
drm/i915/gvt: change resetting to resetting_eng
Core Changes:
- dma-buf: Allow multiple sync_files to wrap a single dma-fence (Chris)
Driver Changes:
- rockchip: misc fixes to vop driver from the downstream rockchip tree (Mark)
- Error path cleanups to tc358767 & host1x (Lucas & Paul, respectively)
* tag 'drm-misc-fixes-2017-08-08' of git://anongit.freedesktop.org/git/drm-misc:
drm/rockchip: vop: report error when check resource error
drm/rockchip: vop: round_up pitches to word align
drm/rockchip: vop: fix NV12 video display error
drm/rockchip: vop: fix iommu page fault when resume
dma-buf/sync_file: Allow multiple sync_files to wrap a single dma-fence
drm/bridge: tc358767: fix probe without attached output node