Commit graph

139,882 commits

Author SHA1 Message Date
Oleg Nesterov
01578e3616 x86/elf: Remove the unnecessary ADDR_NO_RANDOMIZE checks
The ADDR_NO_RANDOMIZE checks in stack_maxrandom_size() and
randomize_stack_top() are not required.

PF_RANDOMIZE is set by load_elf_binary() only if ADDR_NO_RANDOMIZE is not
set, no need to re-check after that.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Cc: stable@vger.kernel.org
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Link: http://lkml.kernel.org/r/20170815154011.GB1076@redhat.com
2017-08-16 20:32:02 +02:00
Oleg Nesterov
47ac5484fd x86: Fix norandmaps/ADDR_NO_RANDOMIZE
Documentation/admin-guide/kernel-parameters.txt says:

    norandmaps  Don't use address space randomization. Equivalent
                to echo 0 > /proc/sys/kernel/randomize_va_space

but it doesn't work because arch_rnd() which is used to randomize
mm->mmap_base returns a random value unconditionally. And as Kirill
pointed out, ADDR_NO_RANDOMIZE is broken by the same reason.

Just shift the PF_RANDOMIZE check from arch_mmap_rnd() to arch_rnd().

Fixes: 1b028f784e ("x86/mm: Introduce mmap_compat_base() for 32-bit mmap()")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Reviewed-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Cc: stable@vger.kernel.org
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20170815153952.GA1076@redhat.com
2017-08-16 20:32:01 +02:00
Tushar Dave
6170a50689 sparc64: remove unnecessary log message
There is no need to log message if ATU hvapi couldn't get register.
Unlike PCI hvapi, ATU hvapi registration failure is not hard error.
Even if ATU hvapi registration fails (on system with ATU or without
ATU) system continues with legacy IOMMU. So only log message when
ATU hvapi successfully get registered.

Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-16 11:29:56 -07:00
David S. Miller
79db795833 sparc64: Don't clibber fixed registers in __multi4.
%g4 and %g5 are fixed registers used by the kernel for the thread
pointer and the per-cpu offset.  Use %o4 and %g7 instead.

Diagnosis by Anthony Yznaga.

Fixes: 1b4af13ff2 ("sparc64: Add __multi3 for gcc 7.x and later.")
Reported-by: Anatoly Pugachev <matorola@gmail.com>
Tested-by: Anatoly Pugachev <matorola@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-16 10:59:54 -07:00
Rob Clark
6a6729f384 arm64: dts: qcom: msm8916: Add IOMMU support
This patch adds the IOMMU node for the IOMMU that resides on the
Qualcomm MSM8916 platforms.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-08-16 10:09:03 -05:00
Stanimir Varbanov
16bd6c8205 arm64: dts: qcom: msm8916: Add Venus video codec support
This patch adds the Qualcomm Venus video codec node for the video
codec hardware residing on MSM8916 platforms.

Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-08-16 10:08:55 -05:00
Kishon Vijay Abraham I
14fc33209a ARM: dts: dra71-evm: Add pinmux configuration for MMC
Include dra72x-mmc-iodelay.dtsi which has pinmux and IODelay
configuration values for the various MMC modes for dra72 SoC
and use it in the pinctrl properties of MMC devicetree
nodes present in dra71-evm.dts.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-08-16 07:54:12 -07:00
Kishon Vijay Abraham I
17e22528c4 ARM: dts: dra72-evm-revc: Add pinmux configuration for MMC
Include dra72x-mmc-iodelay.dtsi which has pinmux and IODelay
configuration values for the various MMC modes for dra72 SoC
and use it in the pinctrl properties of MMC devicetree
nodes present in dra72-evm-revc.dts.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-08-16 07:54:11 -07:00
Kishon Vijay Abraham I
58c3b88d03 ARM: dts: dra72-evm: Add pinmux configuration for MMC
Include dra72x-mmc-iodelay.dtsi which has pinmux and IODelay
configuration values for the various MMC modes for dra72 SoC
and use it in the pinctrl properties of MMC devicetree
nodes present in dra72-evm.dts.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-08-16 07:54:11 -07:00
Kishon Vijay Abraham I
f524dca766 ARM: dts: am572x-idk: Add pinmux configuration for MMC
Include dra74x-mmc-iodelay.dtsi which has pinmux and IODelay
configuration values for the various MMC modes for dra74x SoC
and use it in the pinctrl properties of MMC devicetree
nodes present in am572x-idk.dts.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-08-16 07:54:10 -07:00
Kishon Vijay Abraham I
14543d8508 ARM: dts: am571x-idk: Add pinmux configuration for MMC
Include dra72x-mmc-iodelay.dtsi which has pinmux and IODelay
configuration values for the various MMC modes for dra72 SoC
and use it in the pinctrl properties of MMC devicetree
nodes present in am571x-idk.dts.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-08-16 07:54:10 -07:00
Sekhar Nori
799ab3f4e0 ARM: dts: am57xx-idk: Move common MMC/SD properties to common file
AM572x IDK and AM571x IDK boards have equivalent
design of how SD card and eMMC are connected.

The two EVMs mainly differ in IOdelay configuration
needed (because of difference in SoC used).

Move the common properties to am57xx-idk-common.dtsi
file which is common for both EVMs.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-08-16 07:54:09 -07:00
Kishon Vijay Abraham I
a934f8cea4 ARM: dts: am57xx-beagle-x15: Add pinmux configuration for MMC
Include dra74x-mmc-iodelay.dtsi which has pinmux and IODelay
configuration values for the various MMC modes for dra74 SoC
and use it in the pinctrl properties of MMC devicetree
nodes present in am57xx-beagle-x15/am57xx-beagle-x15-revb1.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-08-16 07:54:09 -07:00
Kishon Vijay Abraham I
8d55881c9d ARM: dts: dra7-evm: Add pinmux configuration for MMC
Include dra74x-mmc-iodelay.dtsi which has pinmux and IODelay
configuration values for the various MMC modes for dra74 SoC
and use it in the pinctrl properties of MMC devicetree
nodes present in dra7-evm.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-08-16 07:54:08 -07:00
Sekhar Nori
2c268d09e9 ARM: dts: dra74x: Create a common file with MMC/SD IOdelay data
Add pinmux configuration for MMC module including IODELAY
values suggested in the data manual for the various supported
modes.

IOdelay data for both silicon revision 1.1 and 2.0 is
added here.

The datamanual revisions used are:
* AM572x Silicon Revision 2.0: SPRS953B, Revised November 2016
* AM572x Silicon Revision 1.1: SPRS915R, Revised November 2016

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-08-16 07:54:08 -07:00
Sekhar Nori
b65179de3b ARM: dts: dra72x: Create a common file with MMC/SD IOdelay data
Add pinmux configuration for MMC module including IODELAY
values suggested in the data manual for the various supported
modes.

IOdelay data for both silicon revision 1.0 and 2.0 is
added here.

The datamanual revisions used are:
 * AM571x Silicon Revision 2.0: SPRS957D, Revised January 2017
 * AM571x Silicon Revision 1.0: SPRS919M, Revised November 2017
 * DRA71x : SPRS960B, Revised February 2017

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-08-16 07:54:07 -07:00
Colin Ian King
5707b46a42 x86/intel_rdt: Remove redundant ternary operator on return
The use of the ternary operator is redundant as ret can never be
non-zero at that point. Instead, just return nbytes.

Detected by CoverityScan, CID#1452658 ("Logically dead code")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: kernel-janitors@vger.kernel.org
Link: http://lkml.kernel.org/r/20170808092859.13021-1-colin.king@canonical.com
2017-08-16 16:20:55 +02:00
Laurent Pinchart
5ce783025c ARM: OMAP2+: Don't register omapdss device for omapdrm
The omapdrm driver doesn't need the omapdss device anymore. Although it
can't be removed completely as the fbdev driver still requires it, we
can condition its registration to the usage of the omapfb driver.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-08-16 15:38:51 +03:00
Laurent Pinchart
d86bd82c1a ARM: OMAP2+: Remove unused omapdrm platform device
The omapdrm platform device is unused, as a replacement is now
registered in the omapdss driver. Remove it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-08-16 15:38:51 +03:00
Benjamin Herrenschmidt
96c79b6bd7 powerpc: Remove more redundant VSX save/tests
__giveup_vsx/save_vsx are completely equivalent to testing MSR_FP
and MSR_VEC and calling the corresponding giveup/save function so
just remove the spurious VSX cases. Also add WARN_ONs checking that
we never have VSX enabled without the two other.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-16 22:35:04 +10:00
Benjamin Herrenschmidt
dc801081f2 powerpc: Remove redundant clear of MSR_VSX in __giveup_vsx()
__giveup_fpu() already does it and we cannot have MSR_VSX set
without having MSR_FP also set.

This also adds a warning to check we indeed do

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-16 22:35:03 +10:00
Benjamin Herrenschmidt
746874d31c powerpc: Remove redundant FP/Altivec giveup code
__giveup_vsx() already calls those two functions.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-16 22:34:42 +10:00
Benjamin Herrenschmidt
6a303833b5 powerpc: Fix missing newline before {
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-16 22:34:34 +10:00
Dou Liyang
7baebe54a6 powerpc/topology: Remove the unused parent_node() macro
Commit a7be6e5a7f ("mm: drop useless local parameters of
__register_one_node()") removes the last user of parent_node().

The parent_node() macro in POWERPC platform is unnecessary.

Remove it for cleanup.

Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-16 21:12:41 +10:00
Vikas Shivappa
24247aeeab x86/intel_rdt/cqm: Improve limbo list processing
During a mkdir, the entire limbo list is synchronously checked on each
package for free RMIDs by sending IPIs. With a large number of RMIDs (SKL
has 192) this creates a intolerable amount of work in IPIs.

Replace the IPI based checking of the limbo list with asynchronous worker
threads on each package which periodically scan the limbo list and move the
RMIDs that have:

	llc_occupancy < threshold_occupancy

on all packages to the free list.

mkdir now returns -ENOSPC if the free list and the limbo list ere empty or
returns -EBUSY if there are RMIDs on the limbo list and the free list is
empty.

Getting rid of the IPIs also simplifies the data structures and the
serialization required for handling the lists.

[ tglx: Rewrote changelog ... ]

Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: peterz@infradead.org
Cc: eranian@google.com
Cc: vikas.shivappa@intel.com
Cc: ak@linux.intel.com
Cc: davidcc@google.com
Link: http://lkml.kernel.org/r/1502845243-20454-3-git-send-email-vikas.shivappa@linux.intel.com
2017-08-16 12:05:41 +02:00
Vikas Shivappa
bbc4615e0b x86/intel_rdt/mbm: Fix MBM overflow handler during CPU hotplug
When a CPU is dying, the overflow worker is canceled and rescheduled on a
different CPU in the same domain. But if the timer is already about to
expire this essentially doubles the interval which might result in a non
detected overflow.

Cancel the overflow worker and reschedule it immediately on a different CPU
in same domain. The work could be flushed as well, but that would
reschedule it on the same CPU.

[ tglx: Rewrote changelog once again ]

Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: peterz@infradead.org
Cc: eranian@google.com
Cc: vikas.shivappa@intel.com
Cc: ak@linux.intel.com
Cc: davidcc@google.com
Link: http://lkml.kernel.org/r/1502845243-20454-2-git-send-email-vikas.shivappa@linux.intel.com
2017-08-16 12:05:41 +02:00
Yunzhi Li
d2057bbb79 ARM: hisi: Fix typo in comment
The machine code "0xe51ff004" means "ldr pc, [pc, #-4]".
This patch fixed the comment typo to avoid any confusion.

Signed-off-by: Yunzhi Li <yunzhi.li@deephi.tech>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-08-16 10:40:46 +01:00
Benjamin Herrenschmidt
5a69aec945 powerpc: Fix VSX enabling/flushing to also test MSR_FP and MSR_VEC
VSX uses a combination of the old vector registers, the old FP
registers and new "second halves" of the FP registers.

Thus when we need to see the VSX state in the thread struct
(flush_vsx_to_thread()) or when we'll use the VSX in the kernel
(enable_kernel_vsx()) we need to ensure they are all flushed into
the thread struct if either of them is individually enabled.

Unfortunately we only tested if the whole VSX was enabled, not if they
were individually enabled.

Fixes: 72cd7b44bc ("powerpc: Uncomment and make enable_kernel_vsx() routine available")
Cc: stable@vger.kernel.org # v4.3+
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-16 19:35:54 +10:00
Leo Yan
487f00d4b9 arm64: dts: hi3660: enable watchdog
This patch is to add watchdog binding for Hi3660 on Hikey960 board.

Cc: Guodong Xu <guodong.xu@linaro.org>
Cc: Zhong Kaihua <zhongkaihua@huawei.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-08-16 09:32:12 +01:00
Wang Ruyi
0b507e91de arm64: dts: hi3660: add bindings for DMA
Add bindings for DMA.

Signed-off-by: Wang Ruyi <wangruyi@huawei.com>
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-08-16 09:32:11 +01:00
Guodong Xu
bf1ff5328a arm64: dts: hikey960: change bluetooth uart max-speed to 3mbps
Update bluetooth UART max-speed to 3Mbps

Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-08-16 09:32:11 +01:00
Guodong Xu
996707d765 arm64: dts: hi3660: Reset the mmc hosts
Add reset-names = "reset" into mmc nodes.

Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-08-16 09:32:10 +01:00
Guodong Xu
9c24dc9d00 arm64: dts: hikey960: Add pstore support
This patch reserves some memory in the DTS and sets up a
pstore device tree node to enable pstore support on HiKey960.

Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-08-16 09:32:09 +01:00
Guodong Xu
b6b681c144 arm64: dts: hikey960: Add support for syscon-reboot-mode
Add support to hikey960 dts for the syscon-reboot-mode driver.

Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-08-16 09:32:09 +01:00
Victor Chong
313aebda84 arm64: dts: hikey960: Add optee node
This patch adds op-tee node for hikey960

Signed-off-by: Victor Chong <victor.chong@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-08-16 09:32:08 +01:00
YiPing Xu
f8054fb8a7 arm64: dts: hi3660: add pmu dt node for hi3660
Add pmu dt node for hi3660

Signed-off-by: YiPing Xu <xuyiping@hisilicon.com>
Signed-off-by: Zhong Kaihua <zhongkaihua@huawei.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Jumana Mundichipparakkal <jumana.mp@arm.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-08-16 09:32:07 +01:00
Leo Yan
a6d083441c arm64: dts: hi3660: add L2 cache topology
This patch adds the L2 cache topology on 96boards Hikey960.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-08-16 09:32:06 +01:00
Leo Yan
30fec8268c arm64: dts: hi3660: enable idle states
There are two clusters on the Hi3660, the first one is Cortex-A53 based
and the other one is Cortex-A73 based. These two clusters have different
idle states.

Thanks to Daniel Lezcano's recent changes, the generic ARM cpuidle
driver can now support several clusters with different idle states, thus
supporting the big.Little architecture.

In addition to the WFI idle state which is the default shallowest state
for all ARM cpus, the Hi3660 supports the following states:

 - CA53 CPUs:
        - CPU_SLEEP:       CPU power off state
        - CLUSTER_SLEEP_0: Cluster power off state

 - CA73 CPUs:
        - CPU_NAP:         CPU retention state
        - CPU_SLEEP:       CPU power off state
        - CLUSTER_SLEEP_1: Cluster power off state

This patch adds the idle states description for the Hi3660 to the device
tree.

Cc: Kevin Wang <jean.wangtao@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-08-16 09:32:06 +01:00
Shawn Guo
341b26b719 arm64: dts: hi6220: improve g-tx-fifo-size setting for usb device
The current usb device g-tx-fifo-size setting in DT causes two problems
for kernel driver.

1. On hi6220, there are 15 tx_fifo dedicated for all EPs except EP0,
   while DT only provides tx_fifo settings for 6 EPs.  It results in the
   following annoying complaints from kernel.

[    4.451623] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[7]=0
[    4.461303] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[8]=0
[    4.470969] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[9]=0
[    4.480632] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[10]=0
[    4.490385] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[11]=0
[    4.500140] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[12]=0
[    4.509892] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[13]=0
[    4.519646] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[14]=0
[    4.529399] dwc2 f72c0000.usb: dwc2_check_param_tx_fifo_sizes: Invalid parameter g_tx_fifo_size[15]=0
[    4.539244] dwc2 f72c0000.usb: EPs: 16, dedicated fifos, 1920 entries in SPRAM

   Besides of that, the total 1920 fifo entries isn't fully utilized.
   Endpoint Info Control block consumes 128 entries, g-rx-fifo-size
   is 512, and g-np-tx-fifo-size is 128.  So the fifi entries available
   for tx_fifo is: 1920 - 128 - 512 - 128 = 1152.  Considering that
   the minimal valid tx_fifo size for each EP is 16, it should be
   reasonable to allocate 1152 entries as: 128 x 8 + 16 x 7 = 1136 (only
   16 entries unused).  With this new setting, we can get more EPs to
   use while removing the above warning messages in the meantime.

2. Another consequence of above invalid g_tx_fifo_size parameter is that
   kernel driver will use values read from hardware register as the
   fall-back.  The value is 2048 for each EP fifo.  That's obviously
   invalid either, because even fifo entries for one EP exceeds the
   total entries 1920.  That's why we see the following fat warning from
   function dwc2_hsotg_init_fifo().  The new g-tx-fifo-size settings
   help to remove the warning as well.

[   65.431634] dwc2 f72c0000.usb: Do port resume before switching to device mode
[   65.624176] insufficient fifo memory
[   65.624369] ------------[ cut here ]------------
[   65.633633] WARNING: CPU: 0 PID: 5 at drivers/usb/dwc2/gadget.c:330 dwc2_hsotg_init_fifo+0x164/0x1ac
[   65.643808] CPU: 0 PID: 5 Comm: kworker/u16:0 Not tainted 4.13.0-rc1-00022-g50861cf9dc1b-dirty #81
[   65.653769] Hardware name: HiKey Development Board (DT)
[   65.659624] Workqueue: dwc2 dwc2_conn_id_status_change
[   65.665377] task: ffffffc005f73400 task.stack: ffffffc005f98000
[   65.671987] PC is at dwc2_hsotg_init_fifo+0x164/0x1ac
[   65.677633] LR is at dwc2_hsotg_init_fifo+0x164/0x1ac
[   65.683275] pc : [<ffffff8008638044>] lr : [<ffffff8008638044>] pstate: 600001c5
[   65.691504] sp : ffffffc005f9bce0
[   65.695218] x29: ffffffc005f9bce0 x28: ffffffc005f6ac00
[   65.701172] x27: ffffffc005f73400 x26: 0000000008000580
[   65.707124] x25: ffffff8008bb4af0 x24: ffffff8008d02b70
[   65.713074] x23: 0000003fcc831084 x22: ffffffc0337cf0bc
[   65.719024] x21: 0000000000000580 x20: ffffffc0337cf018
[   65.724976] x19: ffffffc0337cf098 x18: 0000000000000000
[   65.730926] x17: 0000000000000000 x16: 0000000000000000
[   65.736873] x15: 0000000000000000 x14: ffffff8008ca8900
[   65.742825] x13: 0000004035299000 x12: 0000000034d5d91d
[   65.748775] x11: 0000000000000000 x10: 00000000000008d0
[   65.754726] x9 : ffffffc005f9bce0 x8 : 00000000000001b5
[   65.760674] x7 : 66696620746e6569 x6 : ffffff8008d60050
[   65.766623] x5 : 0000000000000000 x4 : 0000000000000000
[   65.772573] x3 : 0000000000000002 x2 : 0000000000000002
[   65.778521] x1 : 0000000000000001 x0 : 0000000000000018
[   65.784469] Call trace:
[   65.787236] Exception stack(0xffffffc005f9bb10 to 0xffffffc005f9bc40)
[   65.794420] bb00:                                   ffffffc0337cf098 0000008000000000
[   65.803145] bb20: ffffffc005f9bce0 ffffff8008638044 ffffff8008bb4af0 0000000008000580
[   65.811870] bb40: ffffffc005f73400 ffffffc005f6ac00 0000000000000000 ffffff8008da2998
[   65.820595] bb60: ffffffc005f9bce0 ffffffc005f9bce0 ffffffc005f9bca0 00000000ffffffc8
[   65.829315] bb80: ffffffc005f9bbb0 ffffff80081046a0 ffffffc005f9bce0 ffffffc005f9bce0
[   65.838038] bba0: ffffffc005f9bca0 00000000ffffffc8 0000000000000018 0000000000000001
[   65.846761] bbc0: 0000000000000002 0000000000000002 0000000000000000 0000000000000000
[   65.855485] bbe0: ffffff8008d60050 66696620746e6569 00000000000001b5 ffffffc005f9bce0
[   65.864207] bc00: 00000000000008d0 0000000000000000 0000000034d5d91d 0000004035299000
[   65.872928] bc20: ffffff8008ca8900 0000000000000000 0000000000000000 0000000000000000
[   65.900856] [<ffffff8008638044>] dwc2_hsotg_init_fifo+0x164/0x1ac
[   65.927195] [<ffffff800863b390>] dwc2_hsotg_core_init_disconnected+0x80/0x3c0
[   65.954736] [<ffffff800862fef0>] dwc2_conn_id_status_change+0xfc/0x21c
[   65.981561] [<ffffff80080d1ca8>] process_one_work+0x124/0x294
[   66.007419] [<ffffff80080d1e70>] worker_thread+0x58/0x3c8
[   66.023243] [<ffffff80080d79a0>] kthread+0x100/0x12c
[   66.032455] [<ffffff8008082ec0>] ret_from_fork+0x10/0x50
[   66.041987] ---[ end trace 7079dcaa2d9e46fa ]---

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-08-16 09:32:05 +01:00
Zhangfei Gao
94d2d94b40 arm64: dts: hi6220: add acpu_sctrl
Add acpu_sctrl clock node

Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Li Pengcheng <lipengcheng8@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-08-16 09:31:01 +01:00
Aneesh Kumar K.V
4ae279c2c9 powerpc/mm/hugetlb: Allow runtime allocation of 16G.
Now that we have GIGANTIC_PAGE enabled on powerpc, use this for 16G hugepages
with hash translation mode. Depending on the total system memory we have, we may
be able to allocate 16G hugepages runtime. This also remove the hugetlb setup
difference between hash/radix translation mode.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-16 14:56:13 +10:00
Aneesh Kumar K.V
79cc38ded1 powerpc/mm/hugetlb: Add support for reserving gigantic huge pages via kernel command line
With commit aa888a7497 ("hugetlb: support larger than MAX_ORDER") we added
support for allocating gigantic hugepages via kernel command line. Switch
ppc64 arch specific code to use that.

W.r.t FSL support, we now limit our allocation range using BOOTMEM_ALLOC_ACCESSIBLE.

We use the kernel command line to do reservation of hugetlb pages on powernv
platforms. On pseries hash mmu mode the supported gigantic huge page size is
16GB and that can only be allocated with hypervisor assist. For pseries the
command line option doesn't do the allocation. Instead pseries does gigantic
hugepage allocation based on hypervisor hint that is specified via
"ibm,expected#pages" property of the memory node.

Cc: Scott Wood <oss@buserror.net>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-16 14:56:12 +10:00
Nitin Gupta
4dbe87d5a7 sparc64: Cleanup hugepage table walk functions
Flatten out nested code structure in huge_pte_offset()
and huge_pte_alloc().

Signed-off-by: Nitin Gupta <nitin.m.gupta@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15 21:48:07 -07:00
Nitin Gupta
df7b2155bb sparc64: Add 16GB hugepage support
Adds support for 16GB hugepage size. To use this page size
use kernel parameters as:

default_hugepagesz=16G hugepagesz=16G hugepages=10

Testing:

Tested with the stream benchmark which allocates 48G of
arrays backed by 16G hugepages and does RW operation on
them in parallel.

Orabug: 25362942

Cc: Anthony Yznaga <anthony.yznaga@oracle.com>
Reviewed-by: Bob Picco <bob.picco@oracle.com>
Signed-off-by: Nitin Gupta <nitin.m.gupta@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15 21:48:07 -07:00
Nitin Gupta
44382b0195 sparc64: Support huge PUD case in get_user_pages
get_user_pages() is used to do direct IO. It already
handles the case where the address range is backed
by PMD huge pages. This patch now adds the case where
the range could be backed by PUD huge pages.

Signed-off-by: Nitin Gupta <nitin.m.gupta@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15 21:48:06 -07:00
Jag Raman
f8c553354e sparc64: vcc: Add RX & TX timer for delayed LDC operation
Add RX & TX timers to perform delayed/asynchronous LDC
read and write operations.

Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15 21:33:52 -07:00
Jag Raman
5d171050e2 sparc64: vcc: Enable VCC port probe and removal
Enables VCC port probe and removal to initialize and terminate
VCC ports respectively. When a device/port matching the VCC driver
is added, the probe function is invoked along with a reference
to the device. remove function is called when the device is
removed.

Also add APIs to cache and retrieve VCC ports from a VCC table

Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15 21:33:51 -07:00
Jag Raman
f283ebd564 sparc64: vcc: Add VCC debug message macros
Add C macros to print debug messages from VCC module

Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15 21:33:51 -07:00
Jag Raman
55bd2133fc sparc64: vcc: Enable VCC module in linux
Enables the Virtual Console Concentrator (VCC) module
in linux kernel

Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15 21:33:50 -07:00
David S. Miller
463910e2df Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2017-08-15 20:23:23 -07:00