Commit graph

139,882 commits

Author SHA1 Message Date
Gregory CLEMENT
40118824c5 ARM64: dts: marvell: add NAND support on the CP110
The NAND controller used in A7K/A8K is present on the CP110. It is
compatible with the pxa-nand driver.

However, due to the limiation of the pins available this controller is
only usable on the CPM for A7K and on the CPS for A8K.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-08-14 16:28:58 +02:00
Zhou Wang
9f5ce88de8 arm64: dts: hisi: add PCIe host controller node for hip07 SoC
Add one PCIe host controller node for HiSilicon Hip07 SoC and enable it in
D05 board.

Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-08-14 15:25:39 +01:00
Andy Yan
0e6ff96faa ARM: dts: rockchip: add saradc support for rv1108
Add saradc device tree node for rv1108 soc

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-08-14 15:33:22 +02:00
Dong Aisheng
a6214218ac dt-bindings: pinctrl: add imx7ulp pinctrl binding doc
i.MX 7ULP has three IOMUXC instances: IOMUXC0 for M4 ports,
IOMUXC1 for A7 ports and IOMUXC DDR for DDR interface.

This patch adds the IOMUXC1 support for A7.

Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-14 15:01:00 +02:00
Breno Leitao
ed49f7fd64 powerpc/xmon: Disable tracing when entering xmon
If tracing is enabled and you get into xmon, the tracing buffer
continues to be updated, causing possible loss of data and unnecessary
tracing information coming from xmon functions.

This patch simple disables tracing when entering xmon, and re-enables it
if the kernel is resumed (with 'x').

Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-14 21:57:57 +10:00
Breno Leitao
4125d012ff powerpc/xmon: Dump ftrace buffers for the current CPU only
Current xmon 'dt' command dumps the tracing buffer for all the CPUs,
which makes it very hard to read due to the fact that most of
powerpc machines currently have many CPUs. Other than that, the CPU
lines are interleaved in the ftrace log.

This new option just dumps the ftrace buffer for the current CPU.

Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-14 21:57:56 +10:00
Dan Carpenter
b3376dcc6c powerpc/perf: Fix double unlock in imc_common_cpuhp_mem_free()
This function is not called with the nest_init_lock held, and it also
unlocks the nest_init_lock immediately below, so it's fairly clear
that this is a typo and should be locking the lock.

Fixes: 885dcd709b ("powerpc/perf: Add nest IMC PMU support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-14 21:57:55 +10:00
Christophe Leroy
ab2675d6ac powerpc/8xx: Fix two CONFIG_8xx left behind
Commit 968159c003 ("powerpc/8xx: Getting rid of remaining use of
CONFIG_8xx") removed all but 2 references to 8xx in Kconfigs.

This patch removes the two remaining ones.

Fixes: 968159c003 ("powerpc/8xx: Getting rid of remaining use of CONFIG_8xx")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-14 21:57:33 +10:00
Vikas Shivappa
a9110b552d x86/intel_rdt: Modify the intel_pqr_state for better performance
Currently we have pqr_state and rdt_default_state which store the cached
CLOSID/RMIDs and the user configured cpu default values respectively. We
touch both of these during context switch. Put all of them in one
structure so that we can spare a cache line.

Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: peterz@infradead.org
Cc: eranian@google.com
Cc: sai.praneeth.prakhya@intel.com
Cc: ak@linux.intel.com
Cc: davidcc@google.com
Link: http://lkml.kernel.org/r/1502304395-7166-3-git-send-email-vikas.shivappa@linux.intel.com
2017-08-14 11:47:47 +02:00
Vikas Shivappa
eda61c265f x86/intel_rdt/cqm: Clear the default RMID during hotcpu
The user configured per cpu default RMID is not cleared during cpu
hotplug. This may lead to incorrect RMID values after a cpu goes offline
and again comes back online. Clear the per cpu default RMID during cpu
offline and online handling.

Reported-by: Prakyha Sai Praneeth <sai.praneeth.prakhya@intel.com>
Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: peterz@infradead.org
Cc: eranian@google.com
Cc: ak@linux.intel.com
Cc: davidcc@google.com
Link: http://lkml.kernel.org/r/1502304395-7166-2-git-send-email-vikas.shivappa@linux.intel.com
2017-08-14 11:47:46 +02:00
Jagan Teki
908d10b02b arm64: defconfig: Enable REGULATOR_AXP20X
The Allwinner A64 SoC is paired with the X-Powers AXP803 PMIC over the
Reduced Serial Bus (RSB). The regulators of this PMIC supply all power
rails of the SoC and many external peripherals.

Enable the driver for the regulators of this PMIC.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[wens@csie.org: refined commit message]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2017-08-14 15:26:09 +08:00
Jagan Teki
88e96d58ad arm64: defconfig: Enable MFD_AXP20X_RSB
The Allwinner A64 SoC is paired with the X-Powers AXP803 PMIC over the
Reduced Serial Bus (RSB).

Enable the driver for this PMIC.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[wens@csie.org: Refined commit message]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2017-08-14 15:23:09 +08:00
Icenowy Zheng
d86e63e1f0 arm64: allwinner: h5: fix pinctrl IRQs
The pin controller of H5 has three IRQs at the chip's GIC, which
represents three banks of pinctrl IRQs. However, the device tree used to
miss the third IRQ of the pin controller, which makes the PG bank IRQ
not usable.

Add the missing IRQ to the pinctrl node.

Fixes: 4e36de179f ("arm64: allwinner: h5: add Allwinner H5 .dtsi")
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2017-08-14 14:18:21 +08:00
Biju Das
2d33ced550 ARM: dts: r8a7743: Add I2C DT support
Add the I2C[0-5] devices to the r8a7743 device tree.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-08-14 07:26:13 +02:00
Shawn Guo
5470964f8c arm64: dts: zte: add initial zx296718-pcbox board support
It adds the initial zx296718-pcbox board support with devices like
storage, audio and VGA output enabled.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2017-08-14 09:51:16 +08:00
Shawn Guo
e419a9a010 arm64: dts: zx296718-evb: add I2S sound card support
It enables the I2S sound card support, which is used to drive audio
through aud96p22 codec in case of TV output.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2017-08-14 09:51:15 +08:00
Shawn Guo
6285fccee5 arm64: dts: zx296718-evb: use audio-graph-card for HDMI audio
Instead of simple-audio-card, audio-graph-card is recommended for audio
bindings.  Let's change to it, so that the HDMI/SPDIF audio card can
align with the new I2S/Codec card which will be added later.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2017-08-14 09:51:15 +08:00
Shawn Guo
a9aa280a5c arm64: dts: zx296718: add irdec device for remote control
Add irdec device for remote control support.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2017-08-14 09:51:15 +08:00
Shawn Guo
2b31230aa0 arm64: dts: zx296718: add PWM device support
It adds PWM device support which will be used to control voltage of core
supply on some boards.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2017-08-14 09:51:15 +08:00
Shawn Guo
dceb9491c6 arm64: dts: zx296718: add voltage data into OPP table
We will enable PWM device to control voltage through pwm-regulator
support.  So let's add voltage data into OPP table.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2017-08-14 09:51:15 +08:00
Shawn Guo
41ec0d50e2 arm64: dts: zx296718: set a better parent clock for I2S0
The default I2S0 parent clock AUDIO_24M can not be divided into required
sample rate in some cases, for example when 48KHz is needed.  Change the
parent clock to AUDIO_99M which works for most sample rates.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2017-08-14 09:51:14 +08:00
Shawn Guo
9e5edc8271 arm64: dts: zx296718: add pinctrl and gpio devices
It adds pinctrl and gpio devices for zx296718 SoC support.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2017-08-14 09:51:14 +08:00
Shawn Guo
391752fbaa arm64: dts: zx296718: add I2S and I2C audio codec
It adds I2S and I2C audio codec devices for zx296718 SoC support.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2017-08-14 09:51:14 +08:00
Shawn Guo
0d348d53e6 arm64: dts: zx296718: add VGA device support
It adds VGA device in zx296718.dtsi, so that boards with VGA connector
can enable the support by changing 'status' in board DTS file.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2017-08-14 09:51:14 +08:00
Shawn Guo
03d95c264a arm64: select PINCTRL for ZTE platform
Select PINCTRL for ZTE platform, so that we can have ZX pinctrl driver
options available for enabling.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2017-08-14 09:50:24 +08:00
Jose Alarcon
b3766c5181 ARM: dts: imx6q-bx50v3: Enable i2c recovery mechanism
This commit enables i2c recovery, supported by the i2c core subsystem.
It defines the required GPIOs for SDA and SCL lines.

Signed-off-by: Jose Alarcon <jose.alarcon@ge.com>
Signed-off-by: Nandor Han <nandor.han@ge.com>
Signed-off-by: Romain Perier <romain.perier@collabora.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-08-14 09:45:13 +08:00
Ashish Kumar
f83de4f008 arm64: dts: ls1088: Correction in Board name from "L1088A" to "LS1088A"
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-08-14 09:39:45 +08:00
Sanchayan Maity
c6a9f13819 ARM: dts: imx6q-apalis-eval: add support for Apalis Evaluation Board
Add support for the Toradex Apalis Evaluation Board.

Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-08-14 09:29:43 +08:00
Sanchayan Maity
dba5c40e64 ARM: dts: imx6: add support for Toradex Ixora V1.1 carrier board
Add support for the Toradex Ixora V1.1 carrier board.

Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-08-14 09:29:40 +08:00
Marcel Ziswiler
8b698e089c ARM: dts: imx6qdl-apalis: imx6q-apalis-ixora: use i2c from dwc hdmi
Migrate to using functionally-reduced I2C master contained in the DWC
HDMI. Therefore drop the GPIO bitbanging based i2cddc definition and
modify resp. pinctrl.

While at it re-order the I2C aliases to start with the generic, followed
by the camera and concluded by the power I2C one.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-08-14 09:29:36 +08:00
Marcel Ziswiler
98d4b6c310 ARM: dts: imx6q-apalis-ixora: add camera i2c bus definition
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-08-14 09:29:34 +08:00
Marcel Ziswiler
e8c8984c3c ARM: dts: imx6q-apalis-ixora: get rid of obsolete fusion comment
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-08-14 09:29:31 +08:00
Marcel Ziswiler
3b611f5d4a ARM: dts: imx6qdl-apalis: reword cam i2c comment
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-08-14 09:29:28 +08:00
Marcel Ziswiler
6e3c81c845 ARM: dts: imx6qdl-apalis: imx6q-apalis-ixora: get rid of tegra legacy gen1_i2c comment
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-08-14 09:29:26 +08:00
Marcel Ziswiler
e13ccd9704 ARM: dts: imx6q-apalis-ixora: combine aliases
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-08-14 09:29:24 +08:00
Sanchayan Maity
6db957dba8 ARM: dts: imx6qdl-apalis: split usdhc1 pinctrl to support 4- and 8-bit
Split the pinctrl property for usdhc1 into a 4-bit SD interface
and an extension to 8-bit. This is required to support both 8-bit
and 4-bit interface on usdhc1 as per the carrier board.

Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-08-14 09:29:20 +08:00
Sanchayan Maity
b5912b6f2b ARM: dts: imx6q-apalis-ixora: fix usdhc2 pinctrl property
The SD1 pinctrl-0 property is overridden but only the card detect pin
is muxed, the control and data signals are not referenced at all.
It worked because the bootloader muxed them to a sensible state though.
Fix this.

Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-08-14 09:29:16 +08:00
Yuantian Tang
39a71db1e2 arm64: dts: ls208xa: add cpu idle support
ls208xa supports another cpu idle state which is pw20 which saves
more power when cpu is idle.
It was implemented through psci firmware.

Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-08-14 09:14:19 +08:00
Yuantian Tang
5334e1a249 arm64: dts: ls1088a: add cpu idle support
ls1088a supports another cpu idle state which is ph20 which saves
more power when cpu is idle.
It was implemented through psci firmware.

Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-08-14 09:14:14 +08:00
Linus Torvalds
b2298fc900 Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS fixes from Ralf Baechle:
 "Another round of MIPS fixes:

   - compressed boot: Ignore a generated .c file

   - VDSO: Fix a register clobber list

   - DECstation: Fix an int-handler.S CPU_DADDI_WORKAROUNDS regression

   - Octeon: Fix recent cleanups that cleaned away a bit too much thus
     breaking the arch side of the EDAC and USB drivers.

   - uasm: Fix duplicate const in "const struct foo const bar[]" which
     GCC 7.1 no longer accepts.

   - Fix race on setting and getting cpu_online_mask

   - Fix preemption issue. To do so cleanly introduce macro to get the
     size of L3 cache line.

   - Revert include cleanup that sometimes results in build error

   - MicroMIPS uses bit 0 of the PC to indicate microMIPS mode. Make
     sure this bit is set for kernel entry as well.

   - Prevent configuring the kernel for both microMIPS and MT. There are
     no such CPUs currently and thus the combination is unsupported and
     results in build errors.

  This has been sitting in linux-next for a few days and has survived
  automated testing by Imagination's test farm. No known regressions
  pending except a number of issues that crept up due to lots of people
  switching to GCC 7.1"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: Set ISA bit in entry-y for microMIPS kernels
  MIPS: Prevent building MT support for microMIPS kernels
  MIPS: PCI: Fix smp_processor_id() in preemptible
  MIPS: Introduce cpu_tcache_line_size
  MIPS: DEC: Fix an int-handler.S CPU_DADDI_WORKAROUNDS regression
  MIPS: VDSO: Fix clobber lists in fallback code paths
  Revert "MIPS: Don't unnecessarily include kmalloc.h into <asm/cache.h>."
  MIPS: OCTEON: Fix USB platform code breakage.
  MIPS: Octeon: Fix broken EDAC driver.
  MIPS: gitignore: ignore generated .c files
  MIPS: Fix race on setting and getting cpu_online_mask
  MIPS: mm: remove duplicate "const" qualifier on insn_table
2017-08-13 15:34:28 -07:00
Wolfram Sang
0a1c7959ac gpu: drm: tc35876x: move header file out of I2C realm
include/linux/i2c is not for client devices. Move the header file to a
more appropriate location.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2017-08-13 16:07:17 +02:00
Andy Yan
5584b967da ARM: dts: rockchip: add watchdog dt node for rv1108
Add watchdog device tree node for rv1108

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-08-13 14:14:27 +02:00
Andy Yan
32cb77a204 ARM: dts: rockchip: add i2c dt nodes for rv1108
There are four i2c controllers on rv1108, add
device tree node for them.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-08-13 14:05:44 +02:00
Heiko Stuebner
ed562b2f39 arm64: dts: rockchip: remove num-slots property from rk3399-sapphire
When adding the rk3399 sapphire som, two more of the recently removed
num-slots properties of dw-mmc nodes slipped in.
Remove them again.

Fixes: 8164a84cca ("arm64: dts: rockchip: Add support for rk3399 sapphire SOM")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-08-13 13:56:30 +02:00
Ingo Molnar
b60bf53abc Merge branch 'clockevents/4.13-fixes' of http://git.linaro.org/people/daniel.lezcano/linux into timers/urgent
Pull clockevents fixes from Daniel Lezcano:

" - Fix error check against IS_ERR() instead of NULL for the timer-of code (Dan Carpenter)
  - Fix infinite recusion with ftrace for the ARM architected timer (Ding Tianhong)
  - Fix the error code return in the em_sti's probe function (Gustavo A. R.  Silva)
  - Fix Kconfig dependency for the pistachio driver (Matt Redfearn)
  - Fix mem frame loop initialization for the ARM architected timer (Matthias Kaehlcke)"

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-13 11:39:45 +02:00
Boris Brezillon
d4092d76a4 mtd: nand: Rename nand.h into rawnand.h
We are planning to share more code between different NAND based
devices (SPI NAND, OneNAND and raw NANDs), but before doing that
we need to move the existing include/linux/mtd/nand.h file into
include/linux/mtd/rawnand.h so we can later create a nand.h header
containing all common structure and function prototypes.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Peter Pan <peterpandong@micron.com>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: Wenyou Yang <wenyou.yang@microchip.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Han Xu <han.xu@nxp.com>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-By: Harvey Hunt <harveyhuntnexus@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Krzysztof Halasa <khalasa@piap.pl>
2017-08-13 10:11:49 +02:00
Masahiro Yamada
e5aefb380e arm64: dts: uniphier: add Denali NAND controller nodes
Add NAND controller node to LD11 and LD20.  Neither of them supports
the CS1 line, so pinctrl is set up for a single CS line.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-13 08:43:27 +09:00
Suman Anna
6794d3771c ARM: dts: keystone-k2g-ice: Add and enable DSP CMA memory pool
A CMA memory pool reserved memory node is added, and is attached
to the DSP node through the 'memory-region' property on the K2G
ICE board. This area will be used for allocating virtio rings and
buffers. This node allows the DSP Memory Protection and Address
Extension (MPAX) module to be configured properly for the DSP
processor, and matches the values used on the other Keystone 2
boards for software compatibility.

The reserved memory node and the user DSP node are also marked
okay to enable the DSP on the K2G ICE board.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2017-08-12 10:58:11 -07:00
Andrew F. Davis
786d7114d2 ARM: dts: keystone-k2g-evm: Add and enable DSP CMA memory pool
A CMA memory pool reserved memory node is added, and is attached
to the DSP node through the 'memory-region' property on the K2G
EVM board. This area will be used for allocating virtio rings and
buffers. This node allows the DSP Memory Protection and Address
Extension (MPAX) module to be configured properly for the DSP
processor, and matches the values used on the other Keystone 2
boards for software compatibility.

The reserved memory node and the user DSP node are also marked
okay to enable the DSP on the 66AK2G EVM board.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2017-08-12 10:58:10 -07:00
Suman Anna
a1b7cb92b4 ARM: dts: keystone-k2g: Add DSP node
The Keystone 2 66AK2G SoC has a single TMS320C66x DSP Core
Subsystem (C66x CorePac), containing a C66x Fixed/Floating-Point
DSP Core, and 32 KB of L1P & L1D SRAMs and a 1 MB L2 SRAM. Add
the DT node for this DSP processor sub-system.

The DT node has a new property 'power-domains' and no 'clocks'
properties, and uses slightly different property values for
'resets' compared to other Keystone 2 SoCs. The processor does
not have an MMU, and uses various IPC Generation registers and
shared memory for inter-processor communication. The alias with
a stem 'rproc' has also been added for the DSP, it provides a
fixed remoteproc id for the DSP processor.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2017-08-12 10:58:10 -07:00