Commit graph

139,882 commits

Author SHA1 Message Date
Marcin Wojtas
9be778f6c6 ARM64: dts: marvell: armada-37xx: Enable uSD on ESPRESSObin
The ESPRESSObin board exposes one of the SDHCI interfaces
via J1 uSD slot. This patch enables it.

Tested-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Zbigniew Bodek <zbodek@gmail.com>
[gregory.clement@free-electrons.com:  removed "no-1-8-v"]
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-08-03 14:16:14 +02:00
Gregory CLEMENT
994a8e8a54 arm64: dts: marvell: Fully re-order nodes in Marvell CP110 dtsi files
Since the introduction of the CP110 dt files, the sata node was
misplaced. Move it at the right place. Thanks to this, the files are
completely ordered.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-08-03 14:14:43 +02:00
Heiko Carstens
83a8842438 s390: use generic asm/unaligned.h
And another header file for which we can use the generic variant,
even though it doesn't look obvious at first glance.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-08-03 13:16:28 +02:00
Heiko Carstens
3cb8f11c5d s390: use generic uapi/asm/swab.h
clang doesn't like s390 specific inline assembler constraints. These
are present in our arch specific uapi/asm/swab.h which again is
required by some ebpf test cases.

For current compiler versions the generic swab.h already makes use of
gcc's builtin functions. Therefore we can simply remove our own header
file and use the generic one.

This will generate worse code if used with compilers before gcc 4.8,
which has no __builtin_bswap16(); or before gcc v4.4, which has no
__builtin_bswap[32|64](). For these cases a C implementation fallback
would be used which generates more code, but is still correct (170KB
extra code for gcc 4.3 with performance_defconfig).

However given that we need (and want) to get rid of the inline
assemblies anyway in order to be able to use clang, the above is just
a minor drawback if old gcc compilers are used.

With current compilers there is close to zero difference, except for
three btrfs bit functions which generate more out-of-line code. The
generated code looks still correct and also uses the s390 specific
byteswap instructions.

Reported-and-tested-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-08-03 13:16:27 +02:00
Benjamin Herrenschmidt
6ff4d3e966 powerpc: Remove old unused icswx based coprocessor support
We have a whole pile of unused code to maintain the ACOP register,
allocate coprocessor PIDs and handle ACOP faults. This mechanism
was used for the HFI adapter on POWER7 which is dead and gone and
whose driver never went upstream. It was used on some A2 core based
stuff that also never saw the light of day.

Take out all that code.

There is still some POWER8 coprocessor code that uses icswx but it's
kernel only and thus doesn't use any of that infrastructure.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-03 16:06:52 +10:00
Benjamin Herrenschmidt
8f5ca0b319 powerpc/mm: Cleanup check for stack expansion
When hitting below a VM_GROWSDOWN vma (typically growing the stack),
we check whether it's a valid stack-growing instruction and we
check the distance to GPR1. This is largely open coded with lots
of comments, so move it out to a helper.

While at it, make store_update_sp a boolean.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-03 16:06:51 +10:00
Benjamin Herrenschmidt
f43bb27ebf powerpc/mm: Don't lose "major" fault indication on retry
If the first iteration returns VM_FAULT_MAJOR but the second
one doesn't, we fail to account the fault as a major fault.

This fixes it and brings the code in line with x86.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-03 16:06:51 +10:00
Benjamin Herrenschmidt
bd0d63f809 powerpc/mm: Move page fault VMA access checks to a helper
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-03 16:06:51 +10:00
Benjamin Herrenschmidt
d2e0d2c51a powerpc/mm: Set fault flags earlier
Move out the code that sets FAULT_FLAG_WRITE so the block that check
access permissions can be extracted. While at it also set
FAULT_FLAG_INSTRUCTION which will be used for protection keys.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-03 16:06:50 +10:00
Benjamin Herrenschmidt
b15021d994 powerpc/mm: Add a bunch of (un)likely annotations to do_page_fault
Mostly for the failure cases

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-03 16:06:50 +10:00
Benjamin Herrenschmidt
11ccdd33d6 powerpc/mm: Move/simplify faulthandler_disabled() and !mm check
Do the check before we re-enable interrupts and clean the code
up a bit.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-03 16:06:49 +10:00
Benjamin Herrenschmidt
2865d08dd9 powerpc/mm: Move the DSISR_PROTFAULT sanity check
This has a page of comment explaining what's going on right in
the middle of do_page_fault() which makes things a bit hard to
follow. Move it to a helper instead. Also do the test earlier
as there's no point waiting until after we found the VMA.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-03 16:06:49 +10:00
Benjamin Herrenschmidt
04aafdc601 powerpc/mm: Cosmetic fix to page fault accounting
No need to break those lines, they aren't that long

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-03 16:06:48 +10:00
Benjamin Herrenschmidt
3da026480a powerpc/mm: Move CMO accounting out of do_page_fault into a helper
It makes do_page_fault() more readable. No functional change.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-03 16:06:48 +10:00
Benjamin Herrenschmidt
b5c8f0fd59 powerpc/mm: Rework mm_fault_error()
First, handle the normal retry failure in do_page_fault itself,
since it's a simple return statement. That allows us to remove
the "continue" special return code from mm_fault_error().

Once that's done, we can have an implementation much closer to
x86 where we only call mm_fault_error() if VM_FAULT_ERROR is set
and directly return.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-03 16:06:47 +10:00
Benjamin Herrenschmidt
c3350602e8 powerpc/mm: Make bad_area* helper functions
Instead of goto labels, instead call those functions and return.

This gets us closer to x86 and allows us to shring do_page_fault()
even more.

The main difference with x86 is that those function return a value
which we then return from do_page_fault(). That value is our
return value from do_page_fault() which we use to generate
kernel faults.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-03 16:06:47 +10:00
Benjamin Herrenschmidt
d3ca587404 powerpc/mm: Fix reporting of kernel execute faults
We currently test for is_exec and DSISR_PROTFAULT but that doesn't
make sense as this is the wrong error bit to test for an execute
permission failure.

In fact, we had code that would return early if we had an exec
fault in kernel mode so I think that was just dead code anyway.

Finally the location of that test is awkward and prevents further
simplifications.

So instead move that test into a helper along with the existing
early test for kernel exec faults and out of range accesses,
and put it all in a "bad_kernel_fault()" helper. While at it
test the correct error bits.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-03 16:06:46 +10:00
Benjamin Herrenschmidt
65d47fd4a3 powerpc/mm: Simplify returns from __do_page_fault
Now that we moved the exception state handling to a wrapper, we can
just directly return rather than "goto bail"

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-03 16:06:46 +10:00
Benjamin Herrenschmidt
bb4be50e61 powerpc/mm: Move debugger check to notify_page_fault()
unclutters the main path

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-03 16:06:46 +10:00
Benjamin Herrenschmidt
f3d96e698e powerpc/mm: Overhaul handling of bad page faults
A bad page fault is when the HW signals an error such as a bad
copy/paste, an AMO error, or some other type of error that will
not be fixed by updating the PTE.

Use a helper page_fault_is_bad() to check for bad page faults thus
removing the per-processor family open-coding in __do_page_fault()
and trigger a SIGBUS rather than a SIGSEGV which is more appropriate.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-03 16:06:45 +10:00
Benjamin Herrenschmidt
e6c8290a89 powerpc/mm: Move error_code checks for bad faults earlier
There's no point looking for the VMA etc.. when we already know
we are going to fail.

This adds some code to set "code" for the si_code but that will
be gone in subsequent patches.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-03 16:06:44 +10:00
Benjamin Herrenschmidt
41b464e5e5 powerpc/mm: Move out definition of CPU specific is_write bits
Define a common page_fault_is_write() helper and use it

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-03 16:06:44 +10:00
Benjamin Herrenschmidt
b4c001dc44 powerpc/mm: Use symbolic constants for filtering SRR1 bits on ISIs
This uses the newly defined constants for this rather than open-coded
numbers. There is a side effect on 64-bit which is to pass through
some of the new P9 bits which we didn't before.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-03 16:06:44 +10:00
Benjamin Herrenschmidt
398a719d34 powerpc/mm: Update bits used to skip hash_page
We test a number of bits from DSISR/SRR1 before deciding
to call hash_page(). If any of these is set, we go directly
to do_page_fault() as the bit indicate a fault that needs
to be handled there (no hashing needed).

This updates the current open-coded masks to use the new
DSISR definitions.

This *does* change the masks actually used in two ways:

 - We used to test various bits that were defined as "always 0"
in the architecture and could be repurposed for something
else. From now on, we just ignore such bits.

 - We were missing some new bits defined on P9

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-03 16:06:43 +10:00
Benjamin Herrenschmidt
870cfe77a9 powerpc/mm: Update definitions of DSISR bits
This updates the definitions for the various DSISR bits to
match both some historical stuff and to match new bits on
POWER9.

In addition, we define some masks corresponding to the "bad"
faults on Book3S, and some masks corresponding to the bits
that match between DSISR and SRR1 for a DSI and an ISI.

This comes with a small code update to change the definition
of DSISR_PGDIRFAULT which becomes DSISR_PRTABLE_FAULT to
match architecture 3.0B

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-03 16:06:43 +10:00
Benjamin Herrenschmidt
d300627c6a powerpc/6xx: Handle DABR match before calling do_page_fault
On legacy 6xx 32-bit procesors, we checked for the DABR match bit
in DSISR from do_page_fault(), in the middle of a pile of ifdef's
because all other CPU types do it in assembly prior to calling
do_page_fault. Fix that.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[mpe: Add #ifdef CONFIG_6xx]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-03 16:06:26 +10:00
Fabio Estevam
d301149bff ARM: dts: imx6ul-14x14-evk: Remove unrelated pin from ENET group
MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 is connected to the INT1 pin of
the FXLS8471Q accelerometer, so remove it from the unrelated ENET
group.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-08-03 09:52:23 +08:00
Fabio Estevam
d165be89c2 ARM: dts: imx7d-sdb: Add flexcan support
Add support for Flexcan.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-08-03 09:52:19 +08:00
Stefan Agner
8528181d20 ARM: dts: imx7-colibri: add NAND support
The Colibri iMX7 modules come with 512MB on-module SLC NAND flash
populated. Make use of it by enabling the GPMI controller.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-08-03 09:13:15 +08:00
Stefan Agner
e7495a45a7 ARM: dts: imx7: add GPMI NAND and APBH DMA
Add i.MX 7 APBH DMA and GPMI NAND modules.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-08-03 09:06:44 +08:00
Stefan Wahren
2c7c040c73 ARM: dts: bcm2835: Add Raspberry Pi Zero W
The Raspberry Pi Zero W has the same components like the Zero plus
a Cypress CYW43438 wireless chip (wifi + bl).

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
2017-08-02 15:25:36 -07:00
Stefan Wahren
4188ea2aeb ARM: bcm283x: Define UART pinmuxing on board level
Until RPI 3 and Zero W the pl011 (uart0) was always on pin 14/15. So in
order to take care of them and other boards in the future,
we need to define UART pinmuxing on board level.

This work based on Eric Anholt's patch "ARM: bcm2385: Don't force pl011
onto pins 14/15." and Fabian Vogt's patch "ARM64: dts: bcm2837: assign
uart0 to BT and uart1 to pin headers".

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
2017-08-02 15:17:36 -07:00
David Matlack
c9f04407f2 KVM: nVMX: mark vmcs12 pages dirty on L2 exit
The host physical addresses of L1's Virtual APIC Page and Posted
Interrupt descriptor are loaded into the VMCS02. The CPU may write
to these pages via their host physical address while L2 is running,
bypassing address-translation-based dirty tracking (e.g. EPT write
protection). Mark them dirty on every exit from L2 to prevent them
from getting out of sync with dirty tracking.

Also mark the virtual APIC page and the posted interrupt descriptor
dirty when KVM is virtualizing posted interrupt processing.

Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-08-02 22:41:04 +02:00
David Matlack
8ca44e88c3 kvm: nVMX: don't flush VMCS12 during VMXOFF or VCPU teardown
According to the Intel SDM, software cannot rely on the current VMCS to be
coherent after a VMXOFF or shutdown. So this is a valid way to handle VMCS12
flushes.

24.11.1 Software Use of Virtual-Machine Control Structures
...
  If a logical processor leaves VMX operation, any VMCSs active on
  that logical processor may be corrupted (see below). To prevent
  such corruption of a VMCS that may be used either after a return
  to VMX operation or on another logical processor, software should
  execute VMCLEAR for that VMCS before executing the VMXOFF instruction
  or removing power from the processor (e.g., as part of a transition
  to the S3 and S4 power states).
...

This fixes a "suspicious rcu_dereference_check() usage!" warning during
kvm_vm_release() because nested_release_vmcs12() calls
kvm_vcpu_write_guest_page() without holding kvm->srcu.

Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-08-02 22:41:03 +02:00
Paolo Bonzini
9f744c5974 KVM: nVMX: do not pin the VMCS12
Since the current implementation of VMCS12 does a memcpy in and out
of guest memory, we do not need current_vmcs12 and current_vmcs12_page
anymore.  current_vmptr is enough to read and write the VMCS12.

And David Matlack noted:

  This patch also fixes dirty tracking (memslot->dirty_bitmap) of the
  VMCS12 page by using kvm_write_guest. nested_release_page() only marks
  the struct page dirty.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
[Added David Matlack's note and nested_release_page_clean() fix.]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-08-02 22:41:03 +02:00
Longpeng(Mike)
ebd28fcb55 KVM: X86: init irq->level in kvm_pv_kick_cpu_op
'lapic_irq' is a local variable and its 'level' field isn't
initialized, so 'level' is random, it doesn't matter but
makes UBSAN unhappy:

UBSAN: Undefined behaviour in .../lapic.c:...
load of value 10 is not a valid value for type '_Bool'
...
Call Trace:
 [<ffffffff81f030b6>] dump_stack+0x1e/0x20
 [<ffffffff81f03173>] ubsan_epilogue+0x12/0x55
 [<ffffffff81f03b96>] __ubsan_handle_load_invalid_value+0x118/0x162
 [<ffffffffa1575173>] kvm_apic_set_irq+0xc3/0xf0 [kvm]
 [<ffffffffa1575b20>] kvm_irq_delivery_to_apic_fast+0x450/0x910 [kvm]
 [<ffffffffa15858ea>] kvm_irq_delivery_to_apic+0xfa/0x7a0 [kvm]
 [<ffffffffa1517f4e>] kvm_emulate_hypercall+0x62e/0x760 [kvm]
 [<ffffffffa113141a>] handle_vmcall+0x1a/0x30 [kvm_intel]
 [<ffffffffa114e592>] vmx_handle_exit+0x7a2/0x1fa0 [kvm_intel]
...

Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-08-02 22:41:01 +02:00
Wanpeng Li
f4ef191086 KVM: X86: Fix loss of pending INIT due to race
When SMP VM start, AP may lost INIT because of receiving INIT between
kvm_vcpu_ioctl_x86_get/set_vcpu_events.

       vcpu 0                             vcpu 1
                                   kvm_vcpu_ioctl_x86_get_vcpu_events
                                     events->smi.latched_init = 0
  send INIT to vcpu1
    set vcpu1's pending_events
                                   kvm_vcpu_ioctl_x86_set_vcpu_events
                                      if (events->smi.latched_init == 0)
                                        clear INIT in pending_events

This patch fixes it by just update SMM related flags if we are in SMM.

Thanks Peng Hao for the report and original commit message.

Reported-by: Peng Hao <peng.hao2@zte.com.cn>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-08-02 22:41:01 +02:00
Palmer Dabbelt
77f0c8bc78 ARC: Remove empty kernel/pcibios.c
ARC requires no arch-specific pcibios hooks, so delete this empty file.

Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-08-02 14:53:35 -05:00
Palmer Dabbelt
ecf677c8dc PCI: Add a generic weak pcibios_align_resource()
Multiple architectures define this as a trivial function, and I'm adding
another one as part of the RISC-V port.  Add a __weak version of
pcibios_align_resource() and delete the now-obselete ones in a handful of
ports.

The only functional change should be that a handful of ports used to export
pcibios_fixup_bus().  Only some architectures export this, so I just
dropped it.

Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-08-02 14:53:16 -05:00
Palmer Dabbelt
bccf90d6e0 PCI: Add a generic weak pcibios_fixup_bus()
Multiple architectures define this as an empty function, and I'm adding
another one as part of the RISC-V port.  Add a __weak version of
pcibios_fixup_bus() and delete the now-obselete ones in a handful of
ports.

The only functional change should be that microblaze used to export
pcibios_fixup_bus().  None of the other architectures exports this, so I
just dropped it.

Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-08-02 14:43:38 -05:00
Thomas Petazzoni
249112cef2 arm64: dts: marvell: re-order RTC nodes in Marvell CP110 description
In both the CP110 master and slave description, the node describing
the RTC was at the wrong place when taking into account increasing
register addresses. Interestingly, it was not even at the same (wrong)
place in both files.

This commit adjusts that, making the master and slave descriptions
more aligned.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-08-02 16:07:38 +02:00
Antoine Tenart
f8c19a8813 arm64: dts: marvell: mcbin: add an stdout-path
This patch adds an stdout-path to the mcbin device tree. This allows to
use earlycon.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-08-02 16:07:38 +02:00
Russell King
b83e1669ad arm64: dts: marvell: mcbin: add support for PCIe
Add support for PCIe with the the PCIe reset signal wired up to the
appropriate GPIO pin.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
(excepted the reset part)
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-08-02 16:07:38 +02:00
Russell King
8a91e1580b arm64: dts: marvell: mcbin: add support for i2c mux
The MACCHIATOBin board has a PCA9548 I2C mux for the SFP ports on
CP100 master I2C bus 1.  Add the DT description for it.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-08-02 16:07:38 +02:00
Russell King
45df70cbd1 arm64: dts: marvell: fix USB3 regulator definition on MacchiatoBin
Due to the lack of GPIO support, the USB3 regulator definition was
left unfinished in the MacchiatoBin DT description. Now that GPIO
support is available, this commit adjusts the Device Tree to properly
describe the USB3 regulator.

[gregory.clement@free-electrons.com: use commit log from Thomas]

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-08-02 16:07:38 +02:00
Russell King
31ec18e02a arm64: dts: marvell: mcbin: add pinctrl nodes
Add pinctrl nodes to describe the CPM I2C0 and CPS SPI1 settings.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-08-02 16:07:38 +02:00
Russell King
2188b396d5 arm64: dts: marvell: cp110: add GPIO interrupts
Add the GPIO interrupts for the CP110.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-08-02 16:07:38 +02:00
Marc Zyngier
48907d0ccb ARM64: dts: marvell: armada-37xx: Enable USB2 on espressobin
The Espressobin SBC has a USB2 interface available on J8. Let's
enable it.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-08-02 16:07:38 +02:00
Marc Zyngier
395e66ba07 ARM64: dts: marvell: armada-37xx: Wire PMUv3
The Cortex-A53s that power the Armada-37xx SoCs are equipped with
a PMUv3, just like most ARMv8 cores.

Advertise the PMUv3 presence in the device tree, and wire its
interrupt. This allows the perf subsystem to work correctly.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-08-02 16:07:38 +02:00
Marc Zyngier
5f926e889f ARM64: dts: marvell: armada-37xx: Enable memory-mapped GIC CPU interface
The Cortex-A53s that power the Armada-37xx SoCs are equipped with
a GIC CPU interface that gets enabled when coupled with a GICv3
interrupt controller, such as the GIC-500 on the this SoC.

Advertise the MMIO ranges provided by the CPUs, which enables
(among other things) GICv2 guests to run under a hypervisor such
as KVM.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-08-02 16:07:38 +02:00