Commit graph

139,882 commits

Author SHA1 Message Date
Tobias Klauser
9cfc5e0454 mn10300: use generic fb.h
The mn10300 arch uses a verbatim copy of the asm-generic version and
does not add any own implementations to the header, so use
asm-generic/fb.h instead of duplicating code.

Link: http://lkml.kernel.org/r/20170517083348.1815-1-tklauser@distanz.ch
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06 16:24:29 -07:00
Tobias Klauser
dc5131641d mn10300: remove wrapper header for asm/device.h
mn10300's asm/device.h is merely including asm-generic/device.h.  Thus,
the arch specific header can be omitted and the generic header can be
used directly.

Link: http://lkml.kernel.org/r/20170517124857.26834-1-tklauser@distanz.ch
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06 16:24:29 -07:00
Paulo Zanoni
2e1e9d4893 x86/gpu: CNL uses the same GMS values as SKL
So don't forget to reserve its stolen memory bits.

v2: Add ack and remove "TODO" from commit message.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://patchwork.freedesktop.org/patch/msgid/1499302845-17856-1-git-send-email-rodrigo.vivi@intel.com
2017-07-06 13:22:14 -07:00
Linus Torvalds
ac7b75966c This is the big bulk of pin control changes for the v4.13 series:
Core:
 
 - The documentation is moved over to RST.
 - We now have agreed bindings for enabling input and output
   buffers without actually enabling input and/or output on a
   pin. We are chiseling out some details of pin control
   electronics.
 
 New drivers:
 
 - ZTE ZX
 - Renesas RZA1
 - MIPS Ingenic JZ47xx: also switch over existing drivers in the
   tree to use this pin controller and consolidate earlier
   spread out code.
 - Microschip MCP23S08: this driver is migrated from the GPIO
   subsystem and totally rewritten to use proper pin control.
   All users are switched over.
 
 New subdrivers:
 
 - Renesas R8A7743 and R8A7745.
 - Allwinner Sunxi A83T R_PIO.
 - Marvell MVEBU Armada CP110 and AP806.
 - Intel Cannon Lake PCH.
 - Qualcomm IPQ8074.
 
 Notable improvements:
 
 - IRQ support on the Marvell MVEBU Armada 37xx.
 - Meson driver supports HDMI CEC, AO, I2S, SPDIF and PWM.
 - Rockchip driver now supports iomux-route switching for
   RK3228, RK3328 and RK3399.
 - Rockchip A10 and A20 are merged into a single driver.
 - STM32 has improved GPIO support.
 - Samsung Exynos drivers are split per ARMv7 and ARMv8.
 - Marvell MVEBU is converted to use regmap for register
   access.
 
 Maintenance:
 
 - Several Renesas SH-PFC refactorings and updates.
 - Serious code size cut for Mediatek MT7623.
 - Misc janitorial and MAINTAINERS fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZXeUhAAoJEEEQszewGV1zcl8QAMZ6To2JBQeK0Qi+pik9ZbW7
 CvnIFT7E4X45tstwFNKIgdQ1C/IcfzKpPSUDRUqi2nWJiWcuYgn3wQwQ5qbkGtaG
 vne0KVChgFGkT2SwycUZy11JxuP75U73e27BwAruxHhwWo5PesUOjjkmUtMqdbNQ
 VAwx6KoCBx1VBlb0uscbSSqFyAspdyeAHPEvSj4IpsqRZzT7YFqDm4C+uTnwavPx
 ZLoTji0HCpPIAo4C8JUAvweWbpxMC1IMdfm9jRkZ4rR/gTFQXvK+9ssI6lxSK6a6
 RiCJaAE6wQHKYm4LL0pGbW+aMGWRRRp8MERNmg8NgnWONcfCxYowoOYeYLeqPhAg
 kWkFHlmjpfo/A79V6tmN32vCpeQd34XGCetMpI93TuZ42olniD2Puv6RscVaSP3T
 3mIqydX9BY8iAviyMaLcHQeChaNdhLQi+AVjrn1VQjdkWn0C7uR++JznsyaxaI+S
 cVadl6k8H393R1Qdvh3JdoL0owsntQxWVWCbR6fyAZTHHiLGEyvL1ceO/rbpSRrn
 c8Ghk5s7f3DFltn7yWiV4k3KVhDPb5iK2dYP9uGCgqbigHWqlcB5PanRu1aGSFov
 h/1VFEMagNCXQCrgGcIfmkEiwW3SqUsFaaoMLhlYpNb/ON3ihGgsZYiczWSj8l4L
 yfCOoszuEsVkV1dFNAjA
 =dUFL
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is the big bulk of pin control changes for the v4.13 series:

  Core:
   - The documentation is moved over to RST.
   - We now have agreed bindings for enabling input and output buffers
     without actually enabling input and/or output on a pin. We are
     chiseling out some details of pin control electronics.

  New drivers:
   - ZTE ZX
   - Renesas RZA1
   - MIPS Ingenic JZ47xx: also switch over existing drivers in the tree
     to use this pin controller and consolidate earlier spread out code.
   - Microschip MCP23S08: this driver is migrated from the GPIO
     subsystem and totally rewritten to use proper pin control. All
     users are switched over.

  New subdrivers:
   - Renesas R8A7743 and R8A7745.
   - Allwinner Sunxi A83T R_PIO.
   - Marvell MVEBU Armada CP110 and AP806.
   - Intel Cannon Lake PCH.
   - Qualcomm IPQ8074.

  Notable improvements:
   - IRQ support on the Marvell MVEBU Armada 37xx.
   - Meson driver supports HDMI CEC, AO, I2S, SPDIF and PWM.
   - Rockchip driver now supports iomux-route switching for RK3228,
     RK3328 and RK3399.
   - Rockchip A10 and A20 are merged into a single driver.
   - STM32 has improved GPIO support.
   - Samsung Exynos drivers are split per ARMv7 and ARMv8.
   - Marvell MVEBU is converted to use regmap for register access.

  Maintenance:
   - Several Renesas SH-PFC refactorings and updates.
   - Serious code size cut for Mediatek MT7623.
   - Misc janitorial and MAINTAINERS fixes"

* tag 'pinctrl-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (137 commits)
  pinctrl: samsung: Remove bogus irq_[un]mask from resource management
  pinctrl: rza1: make structures rza1_gpiochip_template and rza1_pinmux_ops static
  pinctrl: rza1: Remove unneeded wrong check for wrong variable
  pinctrl: qcom: Add ipq8074 pinctrl driver
  pinctrl: freescale: imx7d: make of_device_ids const.
  pinctrl: DT: extend the pinmux property to support integers array
  pinctrl: generic: Add output-enable property
  pinctrl: armada-37xx: Fix number of pin in sdio_sb
  pinctrl: armada-37xx: Fix uart2 group selection register mask
  pinctrl: bcm2835: Avoid warning from __irq_do_set_handler
  pinctrl: sh-pfc: r8a7795: Add PWM support
  MAINTAINERS: Add Qualcomm pinctrl drivers section
  arm: dts: dt-bindings: Add Renesas RZ/A1 pinctrl header
  dt-bindings: pinctrl: Add RZ/A1 bindings doc
  pinctrl: Renesas RZ/A1 pin and gpio controller
  pinctrl: sh-pfc: r8a7792: Add SCIF1 and SCIF2 pin groups
  pinctrl.txt: move it to the driver-api book
  pinctrl: ingenic: checking for NULL instead of IS_ERR()
  pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD20
  pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD11
  ...
2017-07-06 11:38:59 -07:00
Wolfram Sang
056d6ff470 video: adp8870: move header file out of I2C realm
include/linux/i2c is not for client devices. Move the header file to a
more appropriate location.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-07-06 08:58:39 +01:00
Wolfram Sang
8476d6cde2 backlight: adp8860: Move header file out of I2C realm
include/linux/i2c is not for client devices.

Move the header file to a more appropriate location.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-07-06 08:56:08 +01:00
Linus Torvalds
9b51f04424 Merge branch 'parisc-4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull another parisc update from Helge Deller:
 "Christoph Hellwig provided one patch for the parisc architecture to
  drop the DMA_ERROR_CODE define from the parisc architecture"

* 'parisc-4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: ->mapping_error
2017-07-05 17:41:31 -07:00
Linus Torvalds
55a7b2125c arm64 updates for 4.13:
- RAS reporting via GHES/APEI (ACPI)
 - Indirect ftrace trampolines for modules
 - Improvements to kernel fault reporting
 - Page poisoning
 - Sigframe cleanups and preparation for SVE context
 - Core dump fixes
 - Sparse fixes (mainly relating to endianness)
 - xgene SoC PMU v3 driver
 - Misc cleanups and non-critical fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABCgAGBQJZWiuVAAoJELescNyEwWM0g/gIAIRpVEzjE61zfm/KCsVuIu4O
 p6F/HrvF/ApvlFcth8LDpTDYUholzT1e9wmx/O0Ll37UvFUrReT03R5MMJ02WU8s
 hRg0N4izdg2BPa9zuaP/XE5i6WmFfRAwFsv6PzX77FjNGk0M4zhW8acNpWHYMBQT
 DwXT/xCvg6045Sj6CuwfcIqqVHrz6/kpBmvdbW7G3/WpIHpUGIWM9EO3mkuLGMj0
 j0VSCxfAVJvWwmKEBdFExLNjqxvSlVAMOIEAw7yBNLjuheiL+afK+Y1BggB00oe8
 14+6viOgW6L97VmPpYVn0YDseqeGg5DqlNF3NqjTqdmzWH/ApAvL4WXN7SL2jbU=
 =RNzb
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Will Deacon:

 - RAS reporting via GHES/APEI (ACPI)

 - Indirect ftrace trampolines for modules

 - Improvements to kernel fault reporting

 - Page poisoning

 - Sigframe cleanups and preparation for SVE context

 - Core dump fixes

 - Sparse fixes (mainly relating to endianness)

 - xgene SoC PMU v3 driver

 - Misc cleanups and non-critical fixes

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (75 commits)
  arm64: fix endianness annotation for 'struct jit_ctx' and friends
  arm64: cpuinfo: constify attribute_group structures.
  arm64: ptrace: Fix incorrect get_user() use in compat_vfp_set()
  arm64: ptrace: Remove redundant overrun check from compat_vfp_set()
  arm64: ptrace: Avoid setting compat FP[SC]R to garbage if get_user fails
  arm64: fix endianness annotation for __apply_alternatives()/get_alt_insn()
  arm64: fix endianness annotation in get_kaslr_seed()
  arm64: add missing conversion to __wsum in ip_fast_csum()
  arm64: fix endianness annotation in acpi_parking_protocol.c
  arm64: use readq() instead of readl() to read 64bit entry_point
  arm64: fix endianness annotation for reloc_insn_movw() & reloc_insn_imm()
  arm64: fix endianness annotation for aarch64_insn_write()
  arm64: fix endianness annotation in aarch64_insn_read()
  arm64: fix endianness annotation in call_undef_hook()
  arm64: fix endianness annotation for debug-monitors.c
  ras: mark stub functions as 'inline'
  arm64: pass endianness info to sparse
  arm64: ftrace: fix !CONFIG_ARM64_MODULE_PLTS kernels
  arm64: signal: Allow expansion of the signal frame
  acpi: apei: check for pending errors when probing GHES entries
  ...
2017-07-05 17:09:27 -07:00
Logan Gunthorpe
1bcbfbfdeb um: add dummy ioremap and iounmap functions
The user mode architecture does not provide ioremap or iounmap, and
because of this, the arch won't build when the functions are used in some
core libraries.

I have designs to use these functions in scatterlist.c where they'd
almost certainly never be called on the um architecture but it does need
to compile.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Stephen Bates <sbates@raithlin.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-05 23:43:14 +02:00
Florian Fainelli
0a98764567 um: Allow building and running on older hosts
Commit a78ff11122 ("um: add extended processor state save/restore
support") and b6024b21fe ("um: extend fpstate to _xstate to support
YMM registers") forced the use of the x86 FP _xstate and
PTRACE_GETREGSET/SETREGSET. On older hosts, we would neither be able to
build UML nor run it anymore with these two commits applied because we
don't have definitions for struct _xstate nor these two ptrace requests.

We can determine at build time which fp context structure to check
against, just like we can keep using the old i387 fp save/restore if
PTRACE_GETRESET/SETREGSET are not defined.

Fixes: a78ff11122 ("um: add extended processor state save/restore support")
Fixes: b6024b21fe ("um: extend fpstate to _xstate to support YMM registers")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-05 23:31:28 +02:00
Florian Fainelli
f44f1e7da7 um: Avoid longjmp/setjmp symbol clashes with libpthread.a
Building a statically linked UML kernel on a Centos 6.9 host resulted in
the following linking failure (GCC 4.4, glibc-2.12):

/usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libpthread.a(libpthread.o):
In function `siglongjmp':
(.text+0x8490): multiple definition of `longjmp'
arch/x86/um/built-in.o:/local/users/fainelli/openwrt/trunk/build_dir/target-x86_64_musl/linux-uml/linux-4.4.69/arch/x86/um/setjmp_64.S:44:
first defined here
/usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libpthread.a(libpthread.o):
In function `sem_open':
(.text+0x77cd): warning: the use of `mktemp' is dangerous, better use
`mkstemp'
collect2: ld returned 1 exit status
make[4]: *** [vmlinux] Error 1

Adopt a solution similar to the one done for vmap where we define
longjmp/setjmp to be kernel_longjmp/setjmp. In the process, make sure we
do rename the functions in arch/x86/um/setjmp_*.S accordingly.

Fixes: a7df4716d1 ("um: link with -lpthread")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-05 23:30:50 +02:00
Masami Hiramatsu
745a600cf1 um: console: Ignore console= option
Ignore linux kernel's console= option at uml's console
option handler. Since uml's con= option is only for
setting up new console, and Linux kernel's console=
option specify to which console kernel output its
message, we can use both option for different purpose.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-05 23:18:48 +02:00
Masami Hiramatsu
0936d4f3d5 um: Use os_warn to print out pre-boot warning/error messages
Use os_warn() instead of printf/fprintf to print out
pre-boot warning/error messages to stderr.
Note that the help message and version message are
kept to print out to stdout, because user explicitly
specifies those options to get such information.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-05 23:18:25 +02:00
Masami Hiramatsu
721ccae88d um: Add os_warn() for pre-boot warning/error messages
Add os_warn() for printing out pre-boot warning/error
messages in stderr. The messages via os_warn() are not
suppressed by quiet option.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-05 23:18:02 +02:00
Masami Hiramatsu
d3878bb800 um: Use os_info for the messages on normal path
Use os_info() for printing out the messages on the
normal execution path.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-05 23:17:42 +02:00
Masami Hiramatsu
f7887ee110 um: Add os_info() for pre-boot information messages
Add os_info() for printing out pre-boot information
level messages in stderr. The messages via os_info()
are suppressed by "quiet" kernel command line.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-05 23:17:16 +02:00
Masami Hiramatsu
e03c78ac2d um: Use printk instead of printf in make_uml_dir
Since this function will be called after printk buffer
initialized, use printk as other functions do.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-05 23:16:44 +02:00
Linus Torvalds
4be95131bf Merge branch 'work.sys_wait' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull wait syscall updates from Al Viro:
 "Consolidating sys_wait* and compat counterparts.

  Gets rid of set_fs()/double-copy mess, simplifies the whole thing
  (lifting the copyouts to the syscalls means less headache in the part
  that does actual work - fewer failure exits, to start with), gets rid
  of the overhead of field-by-field __put_user()"

* 'work.sys_wait' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  osf_wait4: switch to kernel_wait4()
  waitid(): switch copyout of siginfo to unsafe_put_user()
  wait_task_zombie: consolidate info logics
  kill wait_noreap_copyout()
  lift getrusage() from wait_noreap_copyout()
  waitid(2): leave copyout of siginfo to syscall itself
  kernel_wait4()/kernel_waitid(): delay copying status to userland
  wait4(2)/waitid(2): separate copying rusage to userland
  move compat wait4 and waitid next to native variants
2017-07-05 14:10:19 -07:00
Christoph Hellwig
227145eb38 parisc: ->mapping_error
DMA_ERROR_CODE already went away in linux-next, but parisc unfortunately
added a new instance of it without any review as far as I can tell.

Move the two iommu drivers to report errors through ->mapping_error.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Helge Deller <deller@gmx.de>
2017-07-05 21:46:42 +02:00
Linus Torvalds
5518b69b76 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "Reasonably busy this cycle, but perhaps not as busy as in the 4.12
  merge window:

   1) Several optimizations for UDP processing under high load from
      Paolo Abeni.

   2) Support pacing internally in TCP when using the sch_fq packet
      scheduler for this is not practical. From Eric Dumazet.

   3) Support mutliple filter chains per qdisc, from Jiri Pirko.

   4) Move to 1ms TCP timestamp clock, from Eric Dumazet.

   5) Add batch dequeueing to vhost_net, from Jason Wang.

   6) Flesh out more completely SCTP checksum offload support, from
      Davide Caratti.

   7) More plumbing of extended netlink ACKs, from David Ahern, Pablo
      Neira Ayuso, and Matthias Schiffer.

   8) Add devlink support to nfp driver, from Simon Horman.

   9) Add RTM_F_FIB_MATCH flag to RTM_GETROUTE queries, from Roopa
      Prabhu.

  10) Add stack depth tracking to BPF verifier and use this information
      in the various eBPF JITs. From Alexei Starovoitov.

  11) Support XDP on qed device VFs, from Yuval Mintz.

  12) Introduce BPF PROG ID for better introspection of installed BPF
      programs. From Martin KaFai Lau.

  13) Add bpf_set_hash helper for TC bpf programs, from Daniel Borkmann.

  14) For loads, allow narrower accesses in bpf verifier checking, from
      Yonghong Song.

  15) Support MIPS in the BPF selftests and samples infrastructure, the
      MIPS eBPF JIT will be merged in via the MIPS GIT tree. From David
      Daney.

  16) Support kernel based TLS, from Dave Watson and others.

  17) Remove completely DST garbage collection, from Wei Wang.

  18) Allow installing TCP MD5 rules using prefixes, from Ivan
      Delalande.

  19) Add XDP support to Intel i40e driver, from Björn Töpel

  20) Add support for TC flower offload in nfp driver, from Simon
      Horman, Pieter Jansen van Vuuren, Benjamin LaHaise, Jakub
      Kicinski, and Bert van Leeuwen.

  21) IPSEC offloading support in mlx5, from Ilan Tayari.

  22) Add HW PTP support to macb driver, from Rafal Ozieblo.

  23) Networking refcount_t conversions, From Elena Reshetova.

  24) Add sock_ops support to BPF, from Lawrence Brako. This is useful
      for tuning the TCP sockopt settings of a group of applications,
      currently via CGROUPs"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1899 commits)
  net: phy: dp83867: add workaround for incorrect RX_CTRL pin strap
  dt-bindings: phy: dp83867: provide a workaround for incorrect RX_CTRL pin strap
  cxgb4: Support for get_ts_info ethtool method
  cxgb4: Add PTP Hardware Clock (PHC) support
  cxgb4: time stamping interface for PTP
  nfp: default to chained metadata prepend format
  nfp: remove legacy MAC address lookup
  nfp: improve order of interfaces in breakout mode
  net: macb: remove extraneous return when MACB_EXT_DESC is defined
  bpf: add missing break in for the TCP_BPF_SNDCWND_CLAMP case
  bpf: fix return in load_bpf_file
  mpls: fix rtm policy in mpls_getroute
  net, ax25: convert ax25_cb.refcount from atomic_t to refcount_t
  net, ax25: convert ax25_route.refcount from atomic_t to refcount_t
  net, ax25: convert ax25_uid_assoc.refcount from atomic_t to refcount_t
  net, sctp: convert sctp_ep_common.refcnt from atomic_t to refcount_t
  net, sctp: convert sctp_transport.refcnt from atomic_t to refcount_t
  net, sctp: convert sctp_chunk.refcnt from atomic_t to refcount_t
  net, sctp: convert sctp_datamsg.refcnt from atomic_t to refcount_t
  net, sctp: convert sctp_auth_bytes.refcnt from atomic_t to refcount_t
  ...
2017-07-05 12:31:59 -07:00
Linus Torvalds
8ad06e56dc Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
 "Algorithms:
   - add private key generation to ecdh

  Drivers:
   - add generic gcm(aes) to aesni-intel
   - add SafeXcel EIP197 crypto engine driver
   - add ecb(aes), cfb(aes) and ecb(des3_ede) to cavium
   - add support for CNN55XX adapters in cavium
   - add ctr mode to chcr
   - add support for gcm(aes) to omap"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (140 commits)
  crypto: testmgr - Reenable sha1/aes in FIPS mode
  crypto: ccp - Release locks before returning
  crypto: cavium/nitrox - dma_mapping_error() returns bool
  crypto: doc - fix typo in docs
  Documentation/bindings: Document the SafeXel cryptographic engine driver
  crypto: caam - fix gfp allocation flags (part II)
  crypto: caam - fix gfp allocation flags (part I)
  crypto: drbg - Fixes panic in wait_for_completion call
  crypto: caam - make of_device_ids const.
  crypto: vmx - remove unnecessary check
  crypto: n2 - make of_device_ids const
  crypto: inside-secure - use the base_end pointer in ring rollback
  crypto: inside-secure - increase the batch size
  crypto: inside-secure - only dequeue when needed
  crypto: inside-secure - get the backlog before dequeueing the request
  crypto: inside-secure - stop requeueing failed requests
  crypto: inside-secure - use one queue per hw ring
  crypto: inside-secure - update the context and request later
  crypto: inside-secure - align the cipher and hash send functions
  crypto: inside-secure - optimize DSE bufferability control
  ...
2017-07-05 12:22:23 -07:00
Linus Torvalds
59005b0c59 GCC plugin updates:
- typo fix in Kconfig (Jean Delvare)
 - randstruct infrastructure
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 Comment: Kees Cook <kees@outflux.net>
 
 iQIcBAABCgAGBQJZXG6JAAoJEIly9N/cbcAmoO4P/jgF32XpC/HYGxcLARpcXUFr
 Dct/KJa6LdSIkeiMlmJD2DaLVQqeIyqQd8Aq/6jv4OMC3KtlquAygx4DoGh2zYYP
 HbSBiHz/czL1FCQpbXma2UUff1EDwuNM+wBJp80MgXy6J5KiKjB7yQAp9g0QS4o9
 3WSSitr9VcPEoxF7J9zySobd41IClFYnf1yi/gms2T/uvOHWEqDTUl06Dl3AEXPo
 0C/nMC4sNFggfTcsseAP7HGKiFyGErz2iER5wM0KXmU5eo4wgBK+mNN+n+oz1Doq
 BvkXraAyeor3YsKdu1oOkyeNK8iRscfeiqWUv86kBtfP3vNKUmWmpo77O3qGz5ra
 BwqcPF7nCtejs+QRVgeCrq3M/TUP1USN6shYS1uRVV5EPSy5NAsMO11Nzft7jaax
 LHQxJrCUeO2fHs2vTlzmwoxFq/9882LFRmOzuKqXAnhMQyuySdtbK4rs7ap4gjIt
 Zg6m0xDZWxPdIIrtoZGRuTcMSwV5QT4oTFQ125dgPO6zX9pwUWwN4Sg2zwn6aMx5
 BuHiJmfZsz48TRv1ui7wWjMNrMs8XnUPEOQUJpNHlDbuZbK+WRoIIUjVvtffSclu
 InpFCEq7OSov45ASYZ0SLNJO3N5L1zWjjjrJ3BQjCTxBNLUniBp6w2byWq0XObPD
 BnkZ3MA9xvkvrDsucAkm
 =rtdH
 -----END PGP SIGNATURE-----

Merge tag 'gcc-plugins-v4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull GCC plugin updates from Kees Cook:
 "The big part is the randstruct plugin infrastructure.

  This is the first of two expected pull requests for randstruct since
  there are dependencies in other trees that would be easier to merge
  once those have landed. Notably, the IPC allocation refactoring in
  -mm, and many trivial merge conflicts across several trees when
  applying the __randomize_layout annotation.

  As a result, it seemed like I should send this now since it is
  relatively self-contained, and once the rest of the trees have landed,
  send the annotation patches. I'm expecting the final phase of
  randstruct (automatic struct selection) will land for v4.14, but if
  its other tree dependencies actually make it for v4.13, I can send
  that merge request too.

  Summary:

  - typo fix in Kconfig (Jean Delvare)

  - randstruct infrastructure"

* tag 'gcc-plugins-v4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  ARM: Prepare for randomized task_struct
  randstruct: Whitelist NIU struct page overloading
  randstruct: Whitelist big_key path struct overloading
  randstruct: Whitelist UNIXCB cast
  randstruct: Whitelist struct security_hook_heads cast
  gcc-plugins: Add the randstruct plugin
  Fix English in description of GCC_PLUGIN_STRUCTLEAK
  compiler: Add __designated_init annotation
  gcc-plugins: Detail c-common.h location for GCC 4.6
2017-07-05 11:46:59 -07:00
Linus Torvalds
2cc7b4ca7d Various fixes and tweaks for the pstore subsystem. Highlights:
- use memdup_user() instead of open-coded copies (Geliang Tang)
 - fix record memory leak during initialization (Douglas Anderson)
 - avoid confused compressed record warning (Ankit Kumar)
 - prepopulate record timestamp and remove redundant logic from backends
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 Comment: Kees Cook <kees@outflux.net>
 
 iQIcBAABCgAGBQJZXGq0AAoJEIly9N/cbcAmecQP/iw5ngoGaB5pQD8Jq8srzWJK
 nGysSHuEQmDMSmTpXKllmi+AVotMXtvLzeEy0ThmtaTYJPUF2NYi4BIv0SonAu/v
 6Jds4AP9OYBZAxe95Xdk/VlDpo3LW2DxDk3URC3kmDCWqr91zH2a8RQCfr1ArGb0
 7vI0fEKuc4rDTnOIw4hlJ60UyYX+PsD7m/s/9p///mFN7nIhCvm1w9ToIIwNovX7
 4Hvgs135ZanBjLkvPEKPMQRoizCGEeznZPNhn0WFe+AKFIW0KLME+XArgcrCg5w+
 UZr3p706fqMe54ZuZhzlaoHZKuEEfsSda8XamgSA1tMuHm983DZJ0k9nskyXRqtT
 tGBSaFbrArAim3JvI5diJ6LB7QGGThGWjUc8tkbTMyJyxwZeDvoPIyirzTnignRz
 RbnL3DJDAnKqNuf0RyX6a6iz6JobXRz52SZqOWZ/CWrDnBtsXnvPz/enMANgKLZn
 5Hq3ngapIa+DdK6jipppgPMY2woHrb3Jr6E0xhU6PDXQFMNI8cnD0+6H8h3//XG0
 4q6bGsDMy6G6o6RvxIFN+Nr7Xrff8CSlujClIQBPSgn0fPcxvOnZTnYjN0UQ0RMW
 OCh68vb4eJgi3diYLqQ/1m25fIRsxC8O0uu089bH4uGJgtZUfEX+D6L5UtBGt+fe
 BXbX1HbaVFeatVB/o0el
 =VRl5
 -----END PGP SIGNATURE-----

Merge tag 'pstore-v4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull pstore updates from Kees Cook:
 "Various fixes and tweaks for the pstore subsystem.

  Highlights:

   - use memdup_user() instead of open-coded copies (Geliang Tang)

   - fix record memory leak during initialization (Douglas Anderson)

   - avoid confused compressed record warning (Ankit Kumar)

   - prepopulate record timestamp and remove redundant logic from
     backends"

* tag 'pstore-v4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  powerpc/nvram: use memdup_user
  pstore: use memdup_user
  pstore: Fix format string to use %u for record id
  pstore: Populate pstore record->time field
  pstore: Create common record initializer
  efi-pstore: Refactor erase routine
  pstore: Avoid potential infinite loop
  pstore: Fix leaked pstore_record in pstore_get_backend_records()
  pstore: Don't warn if data is uncompressed and type is not PSTORE_TYPE_DMESG
2017-07-05 11:43:47 -07:00
Herbert Xu
b82ce24426 crypto: sha1-ssse3 - Disable avx2
It has been reported that sha1-avx2 can cause page faults by reading
beyond the end of the input.  This patch disables it until it can be
fixed.

Cc: <stable@vger.kernel.org>
Fixes: 7c1da8d0d0 ("crypto: sha - SHA1 transform x86_64 AVX2")
Reported-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-07-05 21:21:18 +08:00
Maciej W. Rozycki
f3235d3207 MIPS: MIPS16e2: Subdecode extended LWSP/SWSP instructions
Implement extended LWSP/SWSP instruction subdecoding for the purpose of
unaligned GP-relative memory access emulation.

With the introduction of the MIPS16e2 ASE[1] the previously must-be-zero
3-bit field at bits 7..5 of the extended encodings of the instructions
selected with the LWSP and SWSP major opcodes has become a `sel' field,
acting as an opcode extension for additional operations.  In both cases
the `sel' value of 0 has retained the original operation, that is:

	LW	rx, offset(sp)

and:

	SW	rx, offset(sp)

for LWSP and SWSP respectively.  In hardware predating the MIPS16e2 ASE
other values may or may not have been decoded, architecturally yielding
unpredictable results, and in our unaligned memory access emulation we
have treated the 3-bit field as a don't-care, that is effectively making
all the possible encodings of the field alias to the architecturally
defined encoding of 0.

For the non-zero values of the `sel' field the MIPS16e2 ASE has in
particular defined these GP-relative operations:

	LW	rx, offset(gp)		# sel = 1
	LH	rx, offset(gp)		# sel = 2
	LHU	rx, offset(gp)		# sel = 4

and

	SW	rx, offset(gp)		# sel = 1
	SH	rx, offset(gp)		# sel = 2

for LWSP and SWSP respectively, which will trap with an Address Error
exception if the effective address calculated is not naturally-aligned
for the operation requested.  These operations have been selected for
unaligned access emulation, for consistency with the corresponding
regular MIPS and microMIPS operations.

For other non-zero values of the `sel' field the MIPS16e2 ASE has
defined further operations, which however either never trap with an
Address Error exception, such as LWL or GP-relative SB, or are not
supposed to be emulated, such as LL or SC.  These operations have been
selected to exclude from unaligned access emulation, should an Address
Error exception ever happen with them.

Subdecode the `sel' field in unaligned access emulation then for the
extended encodings of the instructions selected with the LWSP and SWSP
major opcodes, whenever support for the MIPS16e2 ASE has been detected
in hardware, and either emulate the operation requested or send SIGBUS
to the originating process, according to the selection described above.
For hardware implementing the MIPS16 ASE, however lacking MIPS16e2 ASE
support retain the original interpretation of the `sel' field.

The effects of this change are illustrated with the following user
program:

$ cat mips16e2-test.c
#include <inttypes.h>
#include <stdio.h>

int main(void)
{
	int64_t scratch[16] = { 0 };
	int32_t *tmp0, *tmp1, *tmp2;
	int i;

	scratch[0] = 0xc8c7c6c5c4c3c2c1;
	scratch[1] = 0xd0cfcecdcccbcac9;

	asm volatile(
		"move	%0, $sp\n\t"
		"move	%1, $gp\n\t"
		"move	$sp, %4\n\t"
		"addiu	%2, %4, 8\n\t"
		"move	$gp, %2\n\t"

		"lw	%2, 2($sp)\n\t"
		"sw	%2, 16(%4)\n\t"
		"lw	%2, 2($gp)\n\t"
		"sw	%2, 24(%4)\n\t"

		"lw	%2, 1($sp)\n\t"
		"sw	%2, 32(%4)\n\t"
		"lh	%2, 1($gp)\n\t"
		"sw	%2, 40(%4)\n\t"

		"lw	%2, 3($sp)\n\t"
		"sw	%2, 48(%4)\n\t"
		"lhu	%2, 3($gp)\n\t"
		"sw	%2, 56(%4)\n\t"

		"lw	%2, 0(%4)\n\t"
		"sw	%2, 66($sp)\n\t"
		"lw	%2, 8(%4)\n\t"
		"sw	%2, 82($gp)\n\t"

		"lw	%2, 0(%4)\n\t"
		"sw	%2, 97($sp)\n\t"
		"lw	%2, 8(%4)\n\t"
		"sh	%2, 113($gp)\n\t"

		"move	$gp, %1\n\t"
		"move	$sp, %0"
		: "=&d" (tmp0), "=&d" (tmp1), "=&d" (tmp2), "=m" (scratch)
		: "d" (scratch));

	for (i = 0; i < sizeof(scratch) / sizeof(*scratch); i += 2)
		printf("%016" PRIx64 "\t%016" PRIx64 "\n",
		       scratch[i], scratch[i + 1]);

	return 0;
}
$

to be compiled with:

$ gcc -mips16 -mips32r2 -Wa,-mmips16e2 -o mips16e2-test mips16e2-test.c
$

With 74Kf hardware, which does not implement the MIPS16e2 ASE, this
program produces the following output:

$ ./mips16e2-test
c8c7c6c5c4c3c2c1        d0cfcecdcccbcac9
00000000c6c5c4c3        00000000c6c5c4c3
00000000c5c4c3c2        00000000c5c4c3c2
00000000c7c6c5c4        00000000c7c6c5c4
0000c4c3c2c10000        0000000000000000
0000cccbcac90000        0000000000000000
000000c4c3c2c100        0000000000000000
000000cccbcac900        0000000000000000
$

regardless of whether the change has been applied or not.

With the change not applied and interAptive MR2 hardware[2], which does
implement the MIPS16e2 ASE, it produces the following output:

$ ./mips16e2-test
c8c7c6c5c4c3c2c1        d0cfcecdcccbcac9
00000000c6c5c4c3        00000000cecdcccb
00000000c5c4c3c2        00000000cdcccbca
00000000c7c6c5c4        00000000cfcecdcc
0000c4c3c2c10000        0000000000000000
0000000000000000        0000cccbcac90000
000000c4c3c2c100        0000000000000000
0000000000000000        000000cccbcac900
$

which shows that for GP-relative operations the correct trapping address
calculated from $gp has been obtained from the CP0 BadVAddr register and
so has data from the source operand, however masking and extension has
not been applied for halfword operations.

With the change applied and interAptive MR2 hardware the program
produces the following output:

$ ./mips16e2-test
c8c7c6c5c4c3c2c1        d0cfcecdcccbcac9
00000000c6c5c4c3        00000000cecdcccb
00000000c5c4c3c2        00000000ffffcbca
00000000c7c6c5c4        000000000000cdcc
0000c4c3c2c10000        0000000000000000
0000000000000000        0000cccbcac90000
000000c4c3c2c100        0000000000000000
0000000000000000        0000000000cac900
$

as expected.

References:

[1] "MIPS32 Architecture for Programmers: MIPS16e2 Application-Specific
    Extension Technical Reference Manual", Imagination Technologies
    Ltd., Document Number: MD01172, Revision 01.00, April 26, 2016

[2] "MIPS32 interAptiv Multiprocessing System Software User's Manual",
    Imagination Technologies Ltd., Document Number: MD00904, Revision
    02.01, June 15, 2016, Chapter 24 "MIPS16e Application-Specific
    Extension to the MIPS32 Instruction Set", pp. 871-883

Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16095/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-07-05 14:07:20 +02:00
Maciej W. Rozycki
8d1630f137 MIPS: MIPS16e2: Identify ASE presence
Identify the presence of the MIPS16e2 ASE as per the architecture
specification[1], by checking for CP0 Config5.CA2 bit being 1[2].

References:

[1] "MIPS32 Architecture for Programmers: MIPS16e2 Application-Specific
    Extension Technical Reference Manual", Imagination Technologies
    Ltd., Document Number: MD01172, Revision 01.00, April 26, 2016,
    Section 1.2 "Software Detection of the ASE", p. 5

[2] "MIPS32 interAptiv Multiprocessing System Software User's Manual",
    Imagination Technologies Ltd., Document Number: MD00904, Revision
    02.01, June 15, 2016, Section 2.2.1.6 "Device Configuration 5 --
    Config5 (CP0 Register 16, Select 5)", pp. 71-72

Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16094/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-07-05 14:06:44 +02:00
Russell King
98becb781e Merge branches 'fixes' and 'misc' into for-linus 2017-07-05 11:06:59 +01:00
Andy Lutomirski
660da7c922 x86/mm: Enable CR4.PCIDE on supported systems
We can use PCID if the CPU has PCID and PGE and we're not on Xen.

By itself, this has no effect. A followup patch will start using PCID.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Nadav Amit <nadav.amit@gmail.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/6327ecd907b32f79d5aa0d466f04503bbec5df88.1498751203.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-05 10:52:58 +02:00
Andy Lutomirski
0790c9aad8 x86/mm: Add the 'nopcid' boot option to turn off PCID
The parameter is only present on x86_64 systems to save a few bytes,
as PCID is always disabled on x86_32.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Nadav Amit <nadav.amit@gmail.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/8bbb2e65bcd249a5f18bfb8128b4689f08ac2b60.1498751203.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-05 10:52:57 +02:00
Andy Lutomirski
cba4671af7 x86/mm: Disable PCID on 32-bit kernels
32-bit kernels on new hardware will see PCID in CPUID, but PCID can
only be used in 64-bit mode.  Rather than making all PCID code
conditional, just disable the feature on 32-bit builds.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Nadav Amit <nadav.amit@gmail.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/2e391769192a4d31b808410c383c6bf0734bc6ea.1498751203.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-05 10:52:57 +02:00
Andy Lutomirski
43858b4f25 x86/mm: Stop calling leave_mm() in idle code
Now that lazy TLB suppresses all flush IPIs (as opposed to all but
the first), there's no need to leave_mm() when going idle.

This means we can get rid of the rcuidle hack in
switch_mm_irqs_off() and we can unexport leave_mm().

This also removes acpi_unlazy_tlb() from the x86 and ia64 headers,
since it has no callers any more.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Nadav Amit <nadav.amit@gmail.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/03c699cfd6021e467be650d6b73deaccfe4b4bd7.1498751203.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-05 10:52:57 +02:00
Andy Lutomirski
94b1b03b51 x86/mm: Rework lazy TLB mode and TLB freshness tracking
x86's lazy TLB mode used to be fairly weak -- it would switch to
init_mm the first time it tried to flush a lazy TLB.  This meant an
unnecessary CR3 write and, if the flush was remote, an unnecessary
IPI.

Rewrite it entirely.  When we enter lazy mode, we simply remove the
CPU from mm_cpumask.  This means that we need a way to figure out
whether we've missed a flush when we switch back out of lazy mode.
I use the tlb_gen machinery to track whether a context is up to
date.

Note to reviewers: this patch, my itself, looks a bit odd.  I'm
using an array of length 1 containing (ctx_id, tlb_gen) rather than
just storing tlb_gen, and making it at array isn't necessary yet.
I'm doing this because the next few patches add PCID support, and,
with PCID, we need ctx_id, and the array will end up with a length
greater than 1.  Making it an array now means that there will be
less churn and therefore less stress on your eyeballs.

NB: This is dubious but, AFAICT, still correct on Xen and UV.
xen_exit_mmap() uses mm_cpumask() for nefarious purposes and this
patch changes the way that mm_cpumask() works.  This should be okay,
since Xen *also* iterates all online CPUs to find all the CPUs it
needs to twiddle.

The UV tlbflush code is rather dated and should be changed.

Here are some benchmark results, done on a Skylake laptop at 2.3 GHz
(turbo off, intel_pstate requesting max performance) under KVM with
the guest using idle=poll (to avoid artifacts when bouncing between
CPUs).  I haven't done any real statistics here -- I just ran them
in a loop and picked the fastest results that didn't look like
outliers.  Unpatched means commit a4eb8b9935, so all the
bookkeeping overhead is gone.

MADV_DONTNEED; touch the page; switch CPUs using sched_setaffinity.  In
an unpatched kernel, MADV_DONTNEED will send an IPI to the previous CPU.
This is intended to be a nearly worst-case test.

  patched:         13.4µs
  unpatched:       21.6µs

Vitaly's pthread_mmap microbenchmark with 8 threads (on four cores),
nrounds = 100, 256M data

  patched:         1.1 seconds or so
  unpatched:       1.9 seconds or so

The sleepup on Vitaly's test appearss to be because it spends a lot
of time blocked on mmap_sem, and this patch avoids sending IPIs to
blocked CPUs.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Nadav Amit <nadav.amit@gmail.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Banman <abanman@sgi.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Dimitri Sivanich <sivanich@sgi.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Travis <travis@sgi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/ddf2c92962339f4ba39d8fc41b853936ec0b44f1.1498751203.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-05 10:52:57 +02:00
Andy Lutomirski
b0579ade7c x86/mm: Track the TLB's tlb_gen and update the flushing algorithm
There are two kernel features that would benefit from tracking
how up-to-date each CPU's TLB is in the case where IPIs aren't keeping
it up to date in real time:

 - Lazy mm switching currently works by switching to init_mm when
   it would otherwise flush.  This is wasteful: there isn't fundamentally
   any need to update CR3 at all when going lazy or when returning from
   lazy mode, nor is there any need to receive flush IPIs at all.  Instead,
   we should just stop trying to keep the TLB coherent when we go lazy and,
   when unlazying, check whether we missed any flushes.

 - PCID will let us keep recent user contexts alive in the TLB.  If we
   start doing this, we need a way to decide whether those contexts are
   up to date.

On some paravirt systems, remote TLBs can be flushed without IPIs.
This won't update the target CPUs' tlb_gens, which may cause
unnecessary local flushes later on.  We can address this if it becomes
a problem by carefully updating the target CPU's tlb_gen directly.

By itself, this patch is a very minor optimization that avoids
unnecessary flushes when multiple TLB flushes targetting the same CPU
race.  The complexity in this patch would not be worth it on its own,
but it will enable improved lazy TLB tracking and PCID.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Nadav Amit <nadav.amit@gmail.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/1210fb244bc9cbe7677f7f0b72db4d359675f24b.1498751203.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-05 10:52:56 +02:00
Andy Lutomirski
f39681ed0f x86/mm: Give each mm TLB flush generation a unique ID
This adds two new variables to mmu_context_t: ctx_id and tlb_gen.
ctx_id uniquely identifies the mm_struct and will never be reused.
For a given mm_struct (and hence ctx_id), tlb_gen is a monotonic
count of the number of times that a TLB flush has been requested.
The pair (ctx_id, tlb_gen) can be used as an identifier for TLB
flush actions and will be used in subsequent patches to reliably
determine whether all needed TLB flushes have occurred on a given
CPU.

This patch is split out for ease of review.  By itself, it has no
real effect other than creating and updating the new variables.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Nadav Amit <nadav.amit@gmail.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/413a91c24dab3ed0caa5f4e4d017d87b0857f920.1498751203.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-05 10:52:56 +02:00
Chen Yu
12df216c61 x86/boot/e820: Introduce the bootloader provided e820_table_firmware[] table
Add the real e820_tabel_firmware[] that will not be modified by the kernel
or the EFI boot stub under any circumstance.

In addition to that modify the code so that e820_table_firmwarep[] is
exposed via sysfs to represent the real firmware memory layout,
rather than exposing the e820_table_kexec[] table.

This fixes a hibernation bug/warning, which uses e820_table_kexec[] to check
RAM layout consistency across hibernation/resume:

  The suspend kernel:
  [    0.000000] e820: update [mem 0x76671018-0x76679457] usable ==> usable

  The resume kernel:
  [    0.000000] e820: update [mem 0x7666f018-0x76677457] usable ==> usable
  ...
  [   15.752088] PM: Using 3 thread(s) for decompression.
  [   15.752088] PM: Loading and decompressing image data (471870 pages)...
  [   15.764971] Hibernate inconsistent memory map detected!
  [   15.770833] PM: Image mismatch: architecture specific data

Actually it is safe to restore these pages because E820_TYPE_RAM and
E820_TYPE_RESERVED_KERN are treated the same during hibernation, so
the original e820 table provided by the bootloader is used for
hibernation MD5 fingerprint checking.

The side effect is that, this newly introduced variable might increase the
kernel size at compile time.

Suggested-by: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Xunlei Pang <xlpang@redhat.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-05 10:09:02 +02:00
Chen Yu
a09bae0f8a x86/boot/e820: Rename the e820_table_firmware to e820_table_kexec
Currently the e820_table_firmware[] table is mainly used by the kexec,
and it is not what it's supposed to be - despite its name it might be
modified by the kernel.

So change its name to e820_table_kexec[]. In the next patch we will
introduce the real e820_table_firmware[] table.

No functional change.

Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Xunlei Pang <xlpang@redhat.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-05 10:09:02 +02:00
Chen Yu
b7a67e02cd x86/boot/e820: Avoid overwriting e820_table_firmware
The following commit in 2013:

  77ea8c9489 ("x86: Reserve setup_data ranges late after parsing memmap cmdline")

has fixed the issue of losing setup_data information by deferring the
e820_reserve_setup_data() call until the early params have been parsed.

But this also introduced a new problem that, during early params parsing,
the kexec kernel might fake a mptable and saves it into the e820_table_firmware[]
table (without saving the mptable to the e820_table[]), however the subsequent
invoking of e820_reserve_setup_data() will overwrite the e820_table_firmware[]
according to the e820_table[], thus the fake mptable information is lost.

Fix this issue by updating the e820_table_firmware[] according to
the setup_data information, but without overwriting it.

Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Xunlei Pang <xlpang@redhat.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-05 10:09:02 +02:00
Lokesh Vutla
ff570a01b1 ARM: dts: dra71-evm: mdio: Fix impedance values
v1 series[1] for dp83867 phy impedance-control support,
specifies to use ti,impedance-control with a value. These
properties got updated iduring review to specify whether
min or max impedance. But the DT still uses the old values
which never takes effect. Update the DT node by using the
proper DT properties.

[1] https://patchwork.kernel.org/patch/9239729/

Fixes: 9868bc585ae2c ("ARM: dts: Add support for dra718-evm")
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-07-05 00:54:52 -07:00
Mihail Grigorov
5601ca471f ARM: dts: dm816x: Correct the state of the write protect pin
Commit 599c376c49 ("ARM: dts: Fix gpio interrupts for dm816x")
corrected some problems with the MMC.  However, it gets the write
protect pin backwards.  It needs to be ACTIVE_HIGH not ACTIVE_LOW.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mihail Grigorov <michael.grigorov@konsulko.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-07-05 00:54:45 -07:00
Tom Rini
0c88e963a3 ARM: dts: dm816x: Correct NAND support nodes
The ELM node in dm816x.dtsi needs to declare the correct compatible
value here as per the binding only one value is correct, and the current
driver handles it correctly.  We then add pinmux information for the
NAND found on the EVM so that we do not rely on the ROM to do this for
us, and also so that we do not try and probe NAND before we probe the
ELM.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Roger Quadros <rogerq@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Mihail Grigorov <michael.grigorov@konsulko.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-07-05 00:54:36 -07:00
Mikulas Patocka
99c13b8c88 x86/mm/pat: Don't report PAT on CPUs that don't support it
The pat_enabled() logic is broken on CPUs which do not support PAT and
where the initialization code fails to call pat_init(). Due to that the
enabled flag stays true and pat_enabled() returns true wrongfully.

As a consequence the mappings, e.g. for Xorg, are set up with the wrong
caching mode and the required MTRR setups are omitted.

To cure this the following changes are required:

  1) Make pat_enabled() return true only if PAT initialization was
     invoked and successful.

  2) Invoke init_cache_modes() unconditionally in setup_arch() and
     remove the extra callsites in pat_disable() and the pat disabled
     code path in pat_init().

Also rename __pat_enabled to pat_disabled to reflect the real purpose of
this variable.

Fixes: 9cd25aac1f ("x86/mm/pat: Emulate PAT when it is disabled")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Bernhard Held <berny156@gmx.de>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: "Luis R. Rodriguez" <mcgrof@suse.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/alpine.LRH.2.02.1707041749300.3456@file01.intranet.prod.int.rdu2.redhat.com
2017-07-05 09:01:24 +02:00
Jiri Olsa
c46fc0424c s390/syscalls: Fix out of bounds arguments access
Zorro reported following crash while having enabled
syscall tracing (CONFIG_FTRACE_SYSCALLS):

  Unable to handle kernel pointer dereference at virtual ...
  Oops: 0011 [#1] SMP DEBUG_PAGEALLOC

  SNIP

  Call Trace:
  ([<000000000024d79c>] ftrace_syscall_enter+0xec/0x1d8)
   [<00000000001099c6>] do_syscall_trace_enter+0x236/0x2f8
   [<0000000000730f1c>] sysc_tracesys+0x1a/0x32
   [<000003fffcf946a2>] 0x3fffcf946a2
  INFO: lockdep is turned off.
  Last Breaking-Event-Address:
   [<000000000022dd44>] rb_event_data+0x34/0x40
  ---[ end trace 8c795f86b1b3f7b9 ]---

The crash happens in syscall_get_arguments function for
syscalls with zero arguments, that will try to access
first argument (args[0]) in event entry, but it's not
allocated.

Bail out of there are no arguments.

Cc: stable@vger.kernel.org
Reported-by: Zorro Lang <zlang@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-07-05 07:35:30 +02:00
Michael Holzheu
cd0ae1d395 s390/crash: Remove unused KEXEC_NOTE_BYTES
After commmit 692f66f26a ("crash: move crashkernel parsing and vmcore
related code under CONFIG_CRASH_CORE") the KEXEC_NOTE_BYTES macro is not
used anymore and for s390 we create the ELF header in the new kernel
anyway. Therefore remove the macro.

Reported-by: Xunlei Pang <xpang@redhat.com>
Reviewed-by: Mikhail Zaslonko <zaslonko@linux.vnet.ibm.com>
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-07-05 07:35:29 +02:00
Kees Cook
d1185a8c5d Merge branch 'merge/randstruct' into for-next/gcc-plugins 2017-07-04 21:41:31 -07:00
Kees Cook
03232e0dde Merge branch 'for-next/gcc-plugin-infrastructure' into merge/randstruct 2017-07-04 21:40:47 -07:00
Linus Torvalds
19964541c2 ARM: SoC 64-bit changes
Changes to platform code for 64-bit ARM platforms.
 
 Andreas Färber adds two new platforms with initial code: Realtek RTD1295
 and Action Semi S900. Both are fairly similar chips, used mainly in
 set-top-boxes, but with other possible applications, and additional
 members in the respective product families that could be added in the
 future. The code here is fairly minimal, as all the interesting parts
 are in device drivers and dts files.
 
 The Broadcom Vulcan platform gets dropped, as no products ever became
 available, and Cavium integrated the platform under a new name.
 
 Among some other defconfig changes, Timur Tabi enables a number of
 options that are typically required for server platforms.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAWVo2eWCrR//JCVInAQLA6w/8CF+OI6BAw6dcW9BIqyZc80/tlYpbm39+
 nKpCWEndQCxBubjAD/+lFuUB5sh/twsq6MYsnvRM3s4KTy6yzcZSO387AZLXAoSy
 +OAyCd6JWQo4VrElPjTvzVWqCeuBjA/kh7x3cae+iYVREjKvwgyXNTIMKCtGWCcC
 ClBa3FHdSWOaobRIfrGwwbHVahdOMKwEDPma1PaJ/eaIcGA2H/P1Lwyqf4z3ayka
 mIPM6aWlwydFfJZYKiqzlSbN7ZMboB8SJf6xs56R9JUwybGU774OqTik2/pBbqJ3
 RCtcEE5xq8xjC7s2frebLR/0amgoGqkCWSuj4ZU2AO+gg0sUnP3+cc1l6onkOleT
 JdnPFZ/pU4PfYDbfnm8M36omybQmRMw2Y1pdI+GlVPX4qTK1bcz+jbWwI1+uu5w0
 f0Q5oj/O4MKTCTro/ez6GlrnM9x5/ObQb3B3Zk6UcTLNYPp2BcyOKE57udLw3x8v
 C2Rsn29sghKbmjD2cbSB6RvJdJezr5e2ZkRcKSuo5iLpJht1so4lwbbSJawrIwPm
 MmvGLwfia33KIbwpfh4BYTUQ9+dFARBbbxPrm3fryPFx88cLlXSwjN09QH+8R70w
 F3fed2EOr5/WvsqTazQarBSuqxCJ4uBvj3kjsc3f+bp1OjeofGqM9TwGVOxU7Rzy
 O5YjLVKdfe4=
 =771F
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC 64-bit updates from Arnd Bergmann:
 "Changes to platform code for 64-bit ARM platforms.

  Andreas Färber adds two new platforms with initial code: Realtek
  RTD1295 and Action Semi S900. Both are fairly similar chips, used
  mainly in set-top-boxes, but with other possible applications, and
  additional members in the respective product families that could be
  added in the future. The code here is fairly minimal, as all the
  interesting parts are in device drivers and dts files.

  The Broadcom Vulcan platform gets dropped, as no products ever became
  available, and Cavium integrated the platform under a new name.

  Among some other defconfig changes, Timur Tabi enables a number of
  options that are typically required for server platforms"

* tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arm64: defconfig: remove duplicate entry
  arm64: defconfig: enable Qualcomm Technologies EMAC and some PHY drivers
  arm64: defconfig: enable QCOM_L2_PMU and QCOM_L3_PMU
  arm64: defconfig: enable EDAC options
  arm64: defconfig: enable APEI and GHES features
  arm64: defconfig: enable support for PCIe hotplug
  arm64: defconfig: enable EFI_CAPSULE_LOADER
  arm64: defconfig: enable BLK_DEV_NVME
  arm64: defconfig: enable ACPI_CPPC_CPUFREQ
  arm64: marvell: enable ICU and GICP drivers
  arm64: marvell: enable the Armada 7K/8K pinctrl driver
  arm64: Prepare Actions Semi S900
  ARM64: defconfig: enable meson SPICC as module
  ARM64: defconfig: enable IR core, decoders and Meson IR device
  arm64: defconfig: enable Simple Sound Card support
  arm64: defconfig: Enable ARCH_BRCMSTB
  arm64: defconfig: drop ARCH_VULCAN
  arm64: disable Broadcom Vulcan platform
  MAINTAINERS: Add Realtek section
  ARM64: Prepare Realtek RTD1295
2017-07-04 14:53:26 -07:00
Linus Torvalds
a9ceea2674 ARM: 64-bit DT updates
Device-tree updates for arm64 platforms. For the first time I can
 remember, this is actually larger than the corresponding branch for
 32-bit platforms overall, though that has more individual changes.
 
 A significant portion this time is due to added machine support:
 
 - Initial support for the Realtek RTD1295 SoC, along with the Zidoo
   X9S set-top-box
 
 - Initial support for Actions Semi S900 and the Bubblegum-96
   single-board-cёmputer.
 
 - Rockchips support for the rk3399-Firefly single-board-computer
   gets added, this one stands out for being relatively fast,
   affordable and well₋supported, compared to many boards that
   only fall into one or two of the above categories.
 
 - Mediatek gains support for the mt6797 mobile-phone SoC platform
   and corresponding evaluation board.
 
 - Amlogic board support gets added for the NanoPi K2 and S905x
   LibreTech CC single-board computers and the R-Box Pro set-top-box
 
 - Allwinner board support gets added for the OrangePi Win,
   Orangepi Zero Plus 2, NanoPi NEO2 and Orange Pi Prime single
   board computers and the SoPine system-on-module.
 
 - Renesas board support for Salvator-XS and H3ULCB
   automotive development systems.
 
 - Socionext Uniphier board support for LD11-global and LD20-global,
   whatever those may be.
 
 - Broadcom adds support for the new Stingray communication processor
   in its iProc family, along with two reference boards.
 
 Other updates include:
 
 - For the hisicon platform, support for Hi3660-Hikey960 gets
   extended significantly.
 
 - Lots of smaller updates for Renesas, Amlogic, Rockchip, UniPhier,
   Broadcom, Allwinner, Hisilicon, Qualcomm, Marvell, and NXP.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAWVpZnmCrR//JCVInAQJYsBAAhuoRK5WZawkeAMEbkGeyOXYbnp6qUlKm
 w1lwXXdStLjkOUmQXo5KNDmWiHbPnuhwHprX9HMPDI0G1+DSaOlxIezNFIlKOUyW
 fQxZjt4+L3eRXQCetj3P+QAp37ifmFxSg0RmM+fGBwAhNcyf6nH98cn4ZaauZrfu
 F3cJz9t9MTdIlxXXF1uTAk9g9tR8sCoD4ekmM15MwtLZZTqmZNP1OelRDwwzNoOn
 6pp4BUDOFhesynsI7uYoKdj0lt0fGg348FAlt9w1g9xQ819wrdaz/eAmV49eUZQ+
 Ps8FY1OvJsVaoe3yGeEG0Ps87VTRCzSOFqstNDftYsz+q5Mm8ImEwG8JhuoqyDQD
 /VW+DamdXyN4tuUFQfg+Cz8+6WZRwfTeOVmuvC4aRuKNDWV5CC5qP1B7oZ/a2nYR
 6M8+1W+RJOgjJ9wa/125Z6edEpzCRzfxDSLKyHbQ2q//0NK0kRrS9+Rdi6FlReV3
 mVGtK5gFLVzcCyBSaMY48KnRe0/cjOZ5YXw5o/DIeYJkyPnOlN1pXOEMalQCf+uI
 6D8pjO307lt6TLCiq3i2C8bN5k0FBqD4rirsp9PlRw3vTx1LI+KnhJQ8NOrrTheW
 gtDevoDMssnJdmVj3Wbv8DPWJOGSF6vA/xvsQBe0MglHFtuR/0jp9YC8ncvIP1RC
 CkFTqmpZXYg=
 =E8pa
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM 64-bit DT updates from Arnd Bergmann:
 "Device-tree updates for arm64 platforms. For the first time I can
  remember, this is actually larger than the corresponding branch for
  32-bit platforms overall, though that has more individual changes.

  A significant portion this time is due to added machine support:

   - Initial support for the Realtek RTD1295 SoC, along with the Zidoo
     X9S set-top-box

   - Initial support for Actions Semi S900 and the Bubblegum-96
     single-board-cёmputer.

   - Rockchips support for the rk3399-Firefly single-board-computer gets
     added, this one stands out for being relatively fast, affordable
     and well₋supported, compared to many boards that only fall into one
     or two of the above categories.

   - Mediatek gains support for the mt6797 mobile-phone SoC platform and
     corresponding evaluation board.

   - Amlogic board support gets added for the NanoPi K2 and S905x
     LibreTech CC single-board computers and the R-Box Pro set-top-box

   - Allwinner board support gets added for the OrangePi Win, Orangepi
     Zero Plus 2, NanoPi NEO2 and Orange Pi Prime single board computers
     and the SoPine system-on-module.

   - Renesas board support for Salvator-XS and H3ULCB automotive
     development systems.

   - Socionext Uniphier board support for LD11-global and LD20-global,
     whatever those may be.

   - Broadcom adds support for the new Stingray communication processor
     in its iProc family, along with two reference boards.

  Other updates include:

   - For the hisicon platform, support for Hi3660-Hikey960 gets extended
     significantly.

   - Lots of smaller updates for Renesas, Amlogic, Rockchip, UniPhier,
     Broadcom, Allwinner, Hisilicon, Qualcomm, Marvell, and NXP"

* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (243 commits)
  ARM64: dts: marvell: armada37xx: Fix timer interrupt specifiers
  Revert "arm64: dts: marvell: add dma-mask in crypto nodes for 7k/8k"
  arm64: dts: mediatek: don't include missing file
  ARM64: dts: meson-gxl: Add Libre Technology CC support
  dt-bindings: arm: amlogic: Add Libre Technology CC board
  dt-bindings: add Libre Technology vendor prefix
  arm64: dts: marvell: enable GICP and ICU on Armada 7K/8K
  arm64: dts: zte: Use - instead of @ for DT OPP entries
  arm64: dts: marvell: add gpio support for Armada 7K/8K
  arm64: dts: marvell: add pinctrl support for Armada 7K/8K
  arm64: dts: marvell: use new binding for the system controller on cp110
  arm64: dts: marvell: remove *-clock-output-names on cp110
  arm64: dts: marvell: use new bindings for xor clocks on ap806
  arm64: dts: marvell: mcbin: enable the mdio node
  arm64: dts: Add Actions Semi S900 and Bubblegum-96
  dt-bindings: Add vendor prefix for uCRobotics
  arm64: dts: marvell: add xmdio nodes for 7k/8k
  arm64: dts: marvell: add a comment on the cp110 slave node status
  arm64: dts: marvell: remove cpm crypto nodes from dts files
  arm64: dts: marvell: cp110: enable the crypto engine at the SoC level
  ...
2017-07-04 14:50:59 -07:00
Linus Torvalds
9ce32ac8f8 ARM: SoC defconfig updates
The main changes this time are from a cleanup series that Krzysztof
 Kozłowski did, looking for config options in the defconfig files that
 got removed or renamed. He tracked them down to make sure we don't
 lose information unintentionally after an update.
 
 Aside from that, there is the usual driver enablement, this time for
 davinci, samsung, stm⅗2, bcm2835, qualcomm, at91, imx, mvebu, and omap.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAWVo9GGCrR//JCVInAQK7jQ//dBWqZomnTRTiHS1y5DOfKIV1AdHCAKlN
 Q+BqglAl+QQAlNLHLVRVpJo3Cs53J3CXW/J0WdMSNMfgKJeVksF3L4acGoZ3KTBI
 zEStE1WuA494Xfdz6oxLsy6NB6jReDPEAqJlcNWSDEC0WIAXDaFCSvPJd8Vk0+2u
 QXysbZH9OGueBjWuZYtE9qi5jMt7Sfjsuoi2O3FpU5md0oIRdwvIuhctxv4hzmct
 MeNnkuSburz+o9/BLljjwL/BeMDz3kabFHEwvAtaEUsOKltrP1V81JQxcgmG+mkv
 IG2x9q3B2atlb8Jf+Rhe/bwjirNiBzovomEOWiU1XqYlcAuy47tQ0wSdhMaech3P
 cwIfhoVcMgqlyQN6ymZhwoiufzYgnSdbUP5r8CVg/iFGxfa9FWvEAROFVbm5k7qK
 8i5BQqf6fZeh+YA8d3treLtwQHvTk8gfJy9ZjtWEx9pz56Gt3EsbLfyt6APX+EV8
 MNvZaKznPRl724hVV9j9T24gXG6HLzeA7igTKzpF9lk0sXjqM49tji+64PYcvAJ+
 YE77ZfrFxC3R/lnqj3sOWey5rj15l8kaZ24b10YR3T7sWgUUoJZTymjD3uEpnPBr
 Wlo+DK0+dxFQEG5MX4UD56so0krbLPBwpHvVZ60yOEmAd0UZz7HErLlDBaRp1KBS
 ZR+YPNBjwVc=
 =tmYq
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC defconfig updates from Arnd Bergmann:
 "The main changes this time are from a cleanup series that Krzysztof
  Kozłowski did, looking for config options in the defconfig files that
  got removed or renamed. He tracked them down to make sure we don't
  lose information unintentionally after an update.

  Aside from that, there is the usual driver enablement, this time for
  davinci, samsung, stm32, bcm2835, qualcomm, at91, imx, mvebu, and
  omap"

* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits)
  multi_v7_defconfig: Enable OMAP MTD and DM816 AHCI
  ARM: qcom_defconfig: enable RPMSG_QCOM_SMD
  ARM: imx_v6_v7_defconfig: Select CONFIG_IMX7D_ADC
  ARM: mvebu: Enable SENSORS_PWM_FAN in defconfig
  ARM: davinci_all_defconfig: enable USB CDC NCM gadget
  ARM: davinci_all_defconfig: enable mtdtests
  ARM: imx_v6_v7_defconfig: Set THERMAL_WRITABLE_TRIPS=y for testing
  ARM: bcm2835_defconfig: Enable serial & ethernet USB gadget support
  ARM: tct_hammer_defconfig: Save defconfig
  ARM: s5pv210_defconfig: Save defconfig
  ARM: s3c6400_defconfig: Save defconfig
  ARM: mini2440_defconfig: Save defconfig
  ARM: s3c2410_defconfig: Save defconfig
  ARM: exynos_defconfig: Save defconfig
  ARM: s5pv210_defconfig: Bring back lost (but wanted) options
  ARM: s3c6400_defconfig: Bring back lost (but wanted) options
  ARM: s3c2410_defconfig: Bring back lost (but wanted) options
  ARM: tct_hammer_defconfig: Bring back lost (but wanted) options
  ARM: mini2440_defconfig: Bring back lost (but wanted) options
  ARM: defconfig: samsung: Re-order entries to match savedefconfig
  ...
2017-07-04 14:40:29 -07:00
Linus Torvalds
1849f800fb ARM: Device-tree updates
Device-tree continues to see lots of updates. The majority of patches
 here are smaller changes for new hardware on existing platforms, and
 there are a few larger changes worth pointing out.
 
 New machines:
 
 - The new Action Semi S500 platform is added along with initial
   support for the LeMaker Guitar board.
 
 - STM32 gains support for three new boards: stm32h743-disco,
   stm32f746-disco, and stm32f769-disco, along with new device
   support for the existing stm32f429 boards.
 
 - Renesas adds two new boards, the tiny GR-Peach based on RZ/A1H
   with 10MB on-chip SRAM, and the iWave G20D-Q7 System-on-Module
   plus board.
 
 - On Marvell "mvebu", we gain support for the Linksys WRT3200ACM
   wireless router.
 
 - For NXP i.MX, we gain support for the Gateworks Ventana GW5600
   and the Technexion Pico i.MX7D single-board computers.
 
 - The BeagleBone Blue is added for OMAP, it's the latest variation
   of the popular Beaglebone Black single-board computer.
 
 - The Allwinner based Lichee Pi Zero and NanoPi M1 Plus boards
   are added, these are the latest variations of a seemingly endless
   supply of similar single-board computers.
 
 Other updates:
 
 - Linus Walleij improves support for the "Faraday" based SoC platforms
   from various SoC makers (Moxart, Aspeed, Gemini)
 
 - The ARM Mali GPU is now describe on Rockchips SoCs
 
 - Mediatek MT7623 is extended significantly, making it much
   more useful.
 
 - Lots of individual updates on Renesas, OMAP, Rockchips, Broadcom,
   Allwinner, Qualcomm, iMX
 
 - For Amlogic, the clock support is extended a lot on meson8b.
 
 - We now build the devicetree file for the Raspberry Pi 3 on 32-bit
   ARM, in addition to the existing ARM64 support, to help users
   wanting to run a 32-bit system on it.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAWVpLH2CrR//JCVInAQK5hxAAj8u8Y1RFWsfEXqAeGBme7PdiilEfm1ZR
 U6wu6unW/zUb+QwQj52hzmYB9+FEd/bcNgw4AqEzypqMA+vJ6AP5tpujCrOXREsG
 sk2LBnhOi/QbYfzIH6MYqjnrMbjSZ3LZpJ8+PSO+DpGwMkSKhWG5Jjjf1V69IbYJ
 8eTpsnDbpo1OA4mtj+7fDxKGdH2WFx4922UuqTSzgoIqaTV1X2wcicpiJsfKynXY
 3I9Apwhf/gKbtkWkVlNW7gxaAHONZOHEJ9rgIu6XoUCKbQrtbjZWEbKDUM1nJq5J
 4ZYbd9r1HZvujuLk2/IuKTidmXj/4Q1FiIn4jqHINVqNj8dPKKYIoW5nU8rlbxG/
 Ymy9WRY97YznWai49dnURGRbPNuiGyd9oaVsw7Wi1G2F4PgkAMgHs1rpERtIgnZg
 ZzPxlXZdowYUgL6Qawk3//81QqGG/YL8VZ+VltPkjFNNYtEk0U+j3xW/n2ORAdvT
 8EuNlTKid0Cq045nKkpAd5AWcgHIJe7IE3KiX/SpBtgH5PINlnUnwnm2f2TjRZCh
 bw3g32er1JLSW9lAl6agu58lxox7NC1AV4Qy7Qk23IsR2mAv5gb5zad5GXwE41nT
 qcyJ4OnDUpv/3f0LmH3WATQeHNnG8l8RgY8B6fH2GLlTQdmO7W7UTJ8tWU8E2sZ8
 5xPePuor0JM=
 =onXv
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM device-tree updates from Arnd Bergmann:
 "Device-tree continues to see lots of updates. The majority of patches
  here are smaller changes for new hardware on existing platforms, and
  there are a few larger changes worth pointing out.

  New machines:

   - The new Action Semi S500 platform is added along with initial
     support for the LeMaker Guitar board.

   - STM32 gains support for three new boards: stm32h743-disco,
     stm32f746-disco, and stm32f769-disco, along with new device support
     for the existing stm32f429 boards.

   - Renesas adds two new boards, the tiny GR-Peach based on RZ/A1H with
     10MB on-chip SRAM, and the iWave G20D-Q7 System-on-Module plus
     board.

   - On Marvell "mvebu", we gain support for the Linksys WRT3200ACM
     wireless router.

   - For NXP i.MX, we gain support for the Gateworks Ventana GW5600 and
     the Technexion Pico i.MX7D single-board computers.

   - The BeagleBone Blue is added for OMAP, it's the latest variation of
     the popular Beaglebone Black single-board computer.

   - The Allwinner based Lichee Pi Zero and NanoPi M1 Plus boards are
     added, these are the latest variations of a seemingly endless
     supply of similar single-board computers.

  Other updates:

   - Linus Walleij improves support for the "Faraday" based SoC
     platforms from various SoC makers (Moxart, Aspeed, Gemini)

   - The ARM Mali GPU is now describe on Rockchips SoCs

   - Mediatek MT7623 is extended significantly, making it much more
     useful.

   - Lots of individual updates on Renesas, OMAP, Rockchips, Broadcom,
     Allwinner, Qualcomm, iMX

   - For Amlogic, the clock support is extended a lot on meson8b.

   - We now build the devicetree file for the Raspberry Pi 3 on 32-bit
     ARM, in addition to the existing ARM64 support, to help users
     wanting to run a 32-bit system on it"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (345 commits)
  ARM: dts: socfpga: set the i2c frequency
  ARM: dts: socfpga: Add second ethernet alias to VINING FPGA
  ARM: dts: socfpga: Drop LED node from VINING FPGA
  ARM: dts: socfpga: Remove I2C EEPROMs from VINING FPGA
  ARM: dts: socfpga: Enable QSPI support on VINING FPGA
  ARM: dts: socfpga: Fix the ethernet clock phandle
  ARM: pxa: Use - instead of @ for DT OPP entries
  ARM: dts: owl-s500: Add SPS node
  ARM: dts: owl-s500: Set CPU enable-method
  dt-bindings: arm: cpus: Add S500 enable-method
  ARM: dts: Add Actions Semi S500 and LeMaker Guitar
  dt-bindings: arm: Document Actions Semi S900
  dt-bindings: timer: Document Owl timer
  ARM: dts: imx6q-cm-fx6: add sdio wifi/bt nodes
  dt-bindings: arm: Document Actions Semi S500
  dt-bindings: Add vendor prefix for Actions Semi
  ARM: dts: turris-omnia: Add generic compatible string for I2C EEPROM
  ARM: dts: mvebu: add support for Linksys WRT3200ACM (Rango)
  ARM: dts: armada-385-linksys: fixup button node names
  ARM: dts: armada-385-linksys: group pins in pinctrl
  ...
2017-07-04 14:37:25 -07:00
Linus Torvalds
8ca302e9c6 ARM: SoC platform updates
SoC platform changes (arch/arm/mach-*). This merge window, the bulk is
 for a few platforms:
 
 - Andres Färber adds initial support for the Actions Semi S500 (a.k.a.
   'owl') platform, a close relative of the S900 platform he adds for arm64.
 
 - in mach-omap2, we remove more legacy code
 
 - Rockchips gains support for the RV1108 SoC designed for camera
   applications.
 
 - For Atmel, we gain support for MMU-less SoCs (SAME70/V71/S70/V70)
 
 - Minor updates for other platforms, including davinci, s3c64xx,
   prima2, stm32, broadcom nsp, amlogic, pxa, imx and renesas
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAWVo7+GCrR//JCVInAQKbMA//WeEPEDUt0boJCUfuzXfZ35S5ksBMBGQa
 NaOJvcW3T//7Tfa88YlBEB7h1w22u1Sv4/CfcistdSPbUwZLyYo6aUz53AwlUnLs
 bVHnd8+h1xN6qSDjzOPIEQQHg9OVIRBD49moBgJ1BkXzyqR/RI1jPPyyRl5vucSW
 MYRxhPkplmjFL5+6uvFoSOdd3Z/FLoEYRrkIk4iu+KgKtnNlj4P1FNSdm6Yb29dj
 yzmXoSpxEzbq0ahGlkjrekEJxTWvW1vOq9d+xTKwTbXoM7pbzXnBRzx4q2Fg9GAT
 BJseMx+uDEG/+eYrFZA7jX/HgpKB1fAlCGp+dK6GIcJoEM6lFKJRsJrP702KPzg0
 PqOMM/htq/4hZ7Waz+Yj3lyVF2C+A6Dn/fXPaHJGdTLj4r0OLgZayhBXFHp1VX2G
 9ERx1UCnfxeY91VBUM99qo21ECT7j0C/bZLln8MFjwX8tk3OATkElIAtnsEHxJ5d
 v4TEkI/AcpMW4lMj/u/hp1PJMCvhlSreWPGx1PRax6va+YB5Ov19DshVgyfoTTq9
 kArUJWQdKo4aKqB+feg9NHNC01xSLw5ywKb+oIyYP3jZzMexzRyP5L7EAVOu6Cel
 iHeIRpo8VjX63gltE+9u4aZ/aEMREGVcgkzuwBTKqbVQ3ismrmGYe54VnFAushJS
 m+XSB250Vz8=
 =8F3w
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Arnd Bergmann:
 "SoC platform changes (arch/arm/mach-*). This merge window, the bulk is
  for a few platforms:

   - Andres Färber adds initial support for the Actions Semi S500 (aka
     'owl') platform, a close relative of the S900 platform he adds for
     arm64.

   - in mach-omap2, we remove more legacy code

   - Rockchips gains support for the RV1108 SoC designed for camera
     applications.

   - For Atmel, we gain support for MMU-less SoCs (SAME70/V71/S70/V70)

   - Minor updates for other platforms, including davinci, s3c64xx,
     prima2, stm32, broadcom nsp, amlogic, pxa, imx and renesas"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (74 commits)
  ARM: owl: smp: Drop bogus holding pen
  ARM: owl: Drop custom machine
  ARM: owl: smp: Implement SPS power-gating for CPU2 and CPU3
  soc: actions: owl-sps: Factor out owl_sps_set_pg() for power-gating
  soc: actions: Add Owl SPS
  dt-bindings: power: Add Owl SPS power domains
  MAINTAINERS: Update Actions Semi section with SPS
  ARM: owl: Implement CPU enable-method for S500
  MAINTAINERS: Add Actions Semi Owl section
  ARM: Prepare Actions Semi S500
  ARM: socfpga: Increase max number of GPIOs
  ARM: stm32: Introduce MACH_STM32F469 flag
  ARM: prima2: remove redundant select CPU_V7
  ARM: davinci: fix const warnings
  ARM: shmobile: pm-rmobile: Use GENPD_FLAG_ALWAYS_ON
  ARM: OMAP4: hwmod_data: add SHAM crypto accelerator
  ARM: OMAP4: hwmod data: add des
  ARM: OMAP4: hwmod data: add aes2
  ARM: OMAP4: hwmod data: add aes1
  ARM: pxa: Delete an error message for a failed memory allocation in pxa3xx_u2d_probe()
  ...
2017-07-04 14:34:51 -07:00