Add a small helper that complements 36bbef52c7 ("bpf: direct packet
write and access for helpers for clsact progs") for invalidating the
current skb->hash after mangling on headers via direct packet write.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Today the DSA drivers are in charge of flushing the MAC addresses
associated to a port when its STP state changes from Learning or
Forwarding, to Disabled or Blocking or Listening.
This makes the drivers more complex and hides the generic switch logic.
Introduce a new optional port_fast_age operation to dsa_switch_ops, to
move this logic to the DSA layer and keep drivers simple.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Needed e.g for offloading drivers to pick the relevant attributes.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It looks like the following patch can make FQ very precise, even in VM
or stressed hosts. It matters at high pacing rates.
We take into account the difference between the time that was programmed
when last packet was sent, and current time (a drift of tens of usecs is
often observed)
Add an EWMA of the unthrottle latency to help diagnostics.
This latency is the difference between current time and oldest packet in
delayed RB-tree. This accounts for the high resolution timer latency,
but can be different under stress, as fq_check_throttled() can be
opportunistically be called from a dequeue() called after an enqueue()
for a different flow.
Tested:
// Start a 10Gbit flow
$ netperf --google-pacing-rate 1250000000 -H lpaa24 -l 10000 -- -K bbr &
Before patch :
$ sar -n DEV 10 5 | grep eth0 | grep Average
Average: eth0 17106.04 756876.84 1102.75 1119049.02 0.00 0.00 0.52
After patch :
$ sar -n DEV 10 5 | grep eth0 | grep Average
Average: eth0 17867.00 800245.90 1151.77 1183172.12 0.00 0.00 0.52
A new iproute2 tc can output the 'unthrottle latency' :
$ tc -s qd sh dev eth0 | grep latency
0 gc, 0 highprio, 32490767 throttled, 2382 ns latency
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQEcBAABCgAGBQJX45B3AAoJED07qiWsqSVqw34H/060v5lUgOYtRU4Eq2v9PJ9K
S+zTHFObExqHB2CdIqoYoWROG8HT0KcaDI7R1Ua62lM0kM9JucbMUghDALdQiSSE
GG2n7VWgAwpDTh+HL9FCX4sRSjgJ5efRCcGV/x+W/bc9lpFdjCY2G41S3od2Ts6v
m54uXaUPAK29G2rMOUIFKX8IqWcG+OvUCnt+iDeijHRgzwDvNV1vNW9sTPJQjLdN
z1jwSVHelrG/7bBJ5ZuVQVCnF564cTRCr+ZKuwCFXI6fp7DLzup4pqzS/+S0hiVP
MPfuDYoYE1lOVaYgzbR9QSo11TGhCRfnFgYUF9hgklDW+iOQ9heVMXhZ6TRKbBA=
=8O8M
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-4.8-20160922' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2016-09-22
this is a pull request of one patch for the upcoming linux-4.8 release.
The patch by Sergei Miroshnichenko fixes a potential deadlock in the generic
CAN device code that cann occour after a bus-off.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Make it similar to time_before() macros:
- easier to understand
- make use of typecheck() to avoid working on unexpected variable types
(made the issue on previous patch visible)
- for _[lg]te versions, slighly faster, as the compiler used to generate
a sequence of cmp/je/cmp/js instructions and now it's sub/test/jle
(for _lte):
Before, for sctp_outq_sack:
if (primary->cacc.changeover_active) {
1f01: 80 b9 84 02 00 00 00 cmpb $0x0,0x284(%rcx)
1f08: 74 6e je 1f78 <sctp_outq_sack+0xe8>
u8 clear_cycling = 0;
if (TSN_lte(primary->cacc.next_tsn_at_change, sack_ctsn)) {
1f0a: 8b 81 80 02 00 00 mov 0x280(%rcx),%eax
return ((s) - (t)) & TSN_SIGN_BIT;
}
static inline int TSN_lte(__u32 s, __u32 t)
{
return ((s) == (t)) || (((s) - (t)) & TSN_SIGN_BIT);
1f10: 8b 7d bc mov -0x44(%rbp),%edi
1f13: 39 c7 cmp %eax,%edi
1f15: 74 25 je 1f3c <sctp_outq_sack+0xac>
1f17: 39 f8 cmp %edi,%eax
1f19: 78 21 js 1f3c <sctp_outq_sack+0xac>
primary->cacc.changeover_active = 0;
After:
if (primary->cacc.changeover_active) {
1ee7: 80 b9 84 02 00 00 00 cmpb $0x0,0x284(%rcx)
1eee: 74 73 je 1f63 <sctp_outq_sack+0xf3>
u8 clear_cycling = 0;
if (TSN_lte(primary->cacc.next_tsn_at_change, sack_ctsn)) {
1ef0: 8b 81 80 02 00 00 mov 0x280(%rcx),%eax
1ef6: 2b 45 b4 sub -0x4c(%rbp),%eax
1ef9: 85 c0 test %eax,%eax
1efb: 7e 26 jle 1f23 <sctp_outq_sack+0xb3>
primary->cacc.changeover_active = 0;
*_lt() generated pretty much the same code.
Tested with gcc (GCC) 6.1.1 20160621.
This patch also removes SSN_lte as it is not used and cleanups some
comments.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Provide a nand_cleanup() function to free all nand related resources
without unregistering the mtd device.
This should allow drivers to call mtd_device_unregister() and handle
its return value and still being able to cleanup all nand related
resources.
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Daniel Walter <dwalter@sigma-star.at>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
The generic NAND DT bindings allows one to tweak the ECC strength and
step size to their need. It can be used to lower the ECC strength to
match a bootloader/firmware config, but might also be used to get a better
reliability.
In the latter case, the user might want to use the maximum ECC strength
without having to explicitly calculate the exact value (this value not
only depends on the OOB size, but also on the NAND controller, and can
be tricky to extract).
Add a generic 'nand-ecc-maximize' DT property and the associated
NAND_ECC_MAXIMIZE flag, to let ECC controller drivers select the best
ECC strength and step-size on their own.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Rob Herring <robh@kernel.org>
The NAND framework provides several helpers to query timing modes supported
by a NAND chip, but this implies that all NAND controller drivers have
to implement the same timings selection dance. Also currently NAND
devices can be resetted at arbitrary places which also resets the timing
for ONFI chips to timing mode 0.
Provide a common logic to select the best timings based on ONFI or
->onfi_timing_mode_default information. Hook this into nand_reset()
to make sure the new timing is applied each time during a reset.
NAND controller willing to support timings adjustment should just
implement the ->setup_data_interface() method.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The nand layer will need ONFI mode 0 to use it as timing mode
before and right after reset.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
onfi_init_data_interface() initializes a data interface with
values from a given ONFI mode.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Currently we have no data structure to fully describe a NAND timing.
We only have struct nand_sdr_timings for NAND timings in SDR mode,
but nothing for DDR mode and also no container to store both types
of timing.
This patch adds struct nand_data_interface which stores the timing
type and a union of different timings. This can be used to pass to
drivers in order to configure the timing.
Add kerneldoc for struct nand_sdr_timings while touching it anyway.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
When NAND devices are resetted some initialization may have to be done,
like for example they have to be configured for the timing mode that
shall be used. To get a common place where this initialization can be
implemented create a nand_reset() function. This currently only issues
a NAND_CMD_RESET to the NAND device. The places issuing this command
manually are replaced with a call to nand_reset().
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
'extern' is not necessary for function declarations. To prevent
people from adding the keyword to new declarations remove the
existing ones.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
The code to initialize a struct nand_hw_control is duplicated across
several drivers. Factorize it using an inline function.
Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
After commit ac28634456 ("netfilter: bridge: add nf_afinfo to enable
queuing to userspace"), we can queue packets to the user space in bridge
family. But when the user specify the queue range, packets will be only
delivered to the first queue num. Because in nfqueue_hash, we only support
ipv4 and ipv6 family. Now add support for bridge family too.
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Currently, the user can specify the queue numbers by _QUEUE_NUM and
_QUEUE_TOTAL attributes, this is enough in most situations.
But acctually, it is not very flexible, for example:
tcp dport 80 mapped to queue0
tcp dport 81 mapped to queue1
tcp dport 82 mapped to queue2
In order to do this thing, we must add 3 nft rules, and more
mapping meant more rules ...
So take one register to select the queue number, then we can add one
simple rule to mapping queues, maybe like this:
queue num tcp dport map { 80:0, 81:1, 82:2 ... }
Florian Westphal also proposed wider usage scenarios:
queue num jhash ip saddr . ip daddr mod ...
queue num meta cpu ...
queue num meta mark ...
The last point is how to load a queue number from sreg, although we can
use *(u16*)®s->data[reg] to load the queue number, just like nat expr
to load its l4port do.
But we will cooperate with hash expr, meta cpu, meta mark expr and so on.
They all store the result to u32 type, so cast it to u16 pointer and
dereference it will generate wrong result in the big endian system.
So just keep it simple, we treat queue number as u32 type, although u16
type is already enough.
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Fetch value and validate u32 netlink attribute. This validation is
usually required when the u32 netlink attributes are being stored in a
field whose size is smaller.
This patch revisits 4da449ae1d ("netfilter: nft_exthdr: Add size check
on u8 nft_exthdr attributes").
Fixes: 96518518cc ("netfilter: add nftables")
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Turns out assuming that only stuff in uabi is uabi is a bit naive, and
we have a bunch of properties for which the enum values are placed in
random headers. A proper fix would be to split out uapi include
headers, but meanwhile sprinkle at least some warning over them.
Fixes: 532b36712d ("drm/doc: Polish for drm_plane.[hc]")
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1474612525-9488-1-git-send-email-daniel.vetter@ffwll.ch
From: Andrey Vagin <avagin@openvz.org>
Each namespace has an owning user namespace and now there is not way
to discover these relationships.
Pid and user namepaces are hierarchical. There is no way to discover
parent-child relationships too.
Why we may want to know relationships between namespaces?
One use would be visualization, in order to understand the running
system. Another would be to answer the question: what capability does
process X have to perform operations on a resource governed by namespace
Y?
One more use-case (which usually called abnormal) is checkpoint/restart.
In CRIU we are going to dump and restore nested namespaces.
There [1] was a discussion about which interface to choose to determing
relationships between namespaces.
Eric suggested to add two ioctl-s [2]:
> Grumble, Grumble. I think this may actually a case for creating ioctls
> for these two cases. Now that random nsfs file descriptors are bind
> mountable the original reason for using proc files is not as pressing.
>
> One ioctl for the user namespace that owns a file descriptor.
> One ioctl for the parent namespace of a namespace file descriptor.
Here is an implementaions of these ioctl-s.
$ man man7/namespaces.7
...
Since Linux 4.X, the following ioctl(2) calls are supported for
namespace file descriptors. The correct syntax is:
fd = ioctl(ns_fd, ioctl_type);
where ioctl_type is one of the following:
NS_GET_USERNS
Returns a file descriptor that refers to an owning user names‐
pace.
NS_GET_PARENT
Returns a file descriptor that refers to a parent namespace.
This ioctl(2) can be used for pid and user namespaces. For
user namespaces, NS_GET_PARENT and NS_GET_USERNS have the same
meaning.
In addition to generic ioctl(2) errors, the following specific ones
can occur:
EINVAL NS_GET_PARENT was called for a nonhierarchical namespace.
EPERM The requested namespace is outside of the current namespace
scope.
[1] https://lkml.org/lkml/2016/7/6/158
[2] https://lkml.org/lkml/2016/7/9/101
Changes for v2:
* don't return ENOENT for init_user_ns and init_pid_ns. There is nothing
outside of the init namespace, so we can return EPERM in this case too.
> The fewer special cases the easier the code is to get
> correct, and the easier it is to read. // Eric
Changes for v3:
* rename ns->get_owner() to ns->owner(). get_* usually means that it
grabs a reference.
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: "Michael Kerrisk (man-pages)" <mtk.manpages@gmail.com>
Cc: "W. Trevor King" <wking@tremily.us>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Pid and user namepaces are hierarchical. There is no way to discover
parent-child relationships.
In a future we will use this interface to dump and restore nested
namespaces.
Acked-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Each namespace has an owning user namespace and now there is not way
to discover these relationships.
Understending namespaces relationships allows to answer the question:
what capability does process X have to perform operations on a resource
governed by namespace Y?
After a long discussion, Eric W. Biederman proposed to use ioctl-s for
this purpose.
The NS_GET_USERNS ioctl returns a file descriptor to an owning user
namespace.
It returns EPERM if a target namespace is outside of a current user
namespace.
v2: rename parent to relative
v3: Add a missing mntput when returning -EAGAIN --EWB
Acked-by: Serge Hallyn <serge@hallyn.com>
Link: https://lkml.org/lkml/2016/7/6/158
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Return -EPERM if an owning user namespace is outside of a process
current user namespace.
v2: In a first version ns_get_owner returned ENOENT for init_user_ns.
This special cases was removed from this version. There is nothing
outside of init_user_ns, so we can return EPERM.
v3: rename ns->get_owner() to ns->owner(). get_* usually means that it
grabs a reference.
Acked-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
PCIe hotplug supports optional Attention and Power Indicators, which are
used internally by pciehp. Users can't control the Power Indicator, but
they can control the Attention Indicator by writing to a sysfs "attention"
file.
The Slot Control register has two bits for each indicator, and the PCIe
spec defines the encodings for each as (Reserved/On/Blinking/Off). For
sysfs "attention" writes, pciehp_set_attention_status() maps into these
encodings, so the only useful write values are 0 (Off), 1 (On), and 2
(Blinking).
However, some platforms use all four bits for platform-specific indicators,
and they need to allow direct user control of them while preventing pciehp
from using them at all.
Add a "hotplug_user_indicators" flag to the pci_dev structure. When set,
pciehp does not use either the Attention Indicator or the Power Indicator,
and the low four bits (values 0x0 - 0xf) of sysfs "attention" write values
are written directly to the Attention Indicator Control and Power Indicator
Control fields.
[bhelgaas: changelog, rename flag and accessors to s/attention/indicator/]
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
If a driver sets BLK_MQ_F_BLOCKING, it is allowed to block in its
->queue_rq() handler. For that case, blk-mq ensures that we always
calls it from a safe context.
Signed-off-by: Jens Axboe <axboe@fb.com>
Tested-by: Josef Bacik <jbacik@fb.com>
Add a waitqueue head to the client structure. Have clients set a wait
on that queue prior to requesting a lock from the server. If the lock
is blocked, then we can use that to wait for wakeups.
Note that we do need to do this "manually" since we need to set the
wait on the waitqueue prior to requesting the lock, but requesting a
lock can involve activities that can block.
However, only do that for NFSv4.1 locks, either by compiling out
all of the waitqueue handling when CONFIG_NFS_V4_1 is disabled, or
skipping all of it at runtime if we're dealing with v4.0, or v4.1
servers that don't send lock callbacks.
Note too that even when we expect to get a lock callback, RFC5661
section 20.11.4 is pretty clear that we still need to poll for them,
so we do still sleep on a timeout. We do however always poll at the
longest interval in that case.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
[Anna: nfs4_retry_setlk() "status" should default to -ERESTARTSYS]
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Some architectures require an additional load to find the address of
percpu pointers. In some implemenatations, the C aliasing rules do not
allow the result of that load to be kept over the store that modifies
the percpu variable, which causes additional loads.
Work around this by finding the pointer first, then operating on that.
It's also possible to mark things as restrict and those kind of games,
but that can require larger and arch specific changes.
On powerpc, __this_cpu_inc_return compiles to:
ld 10,48(13)
ldx 9,3,10
addi 9,9,1
stdx 9,3,10
ld 9,48(13)
ldx 3,9,3
With this patch it compiles to:
ld 10,48(13)
ldx 9,3,10
addi 9,9,1
stdx 9,3,10
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
To: Tejun Heo <tj@kernel.org>
To: Christoph Lameter <cl@linux.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Signed-off-by: Tejun Heo <tj@kernel.org>
DP MST provides the capability to send multiple video and audio streams
through a single port. This requires the API's between i915 and audio
drivers to distinguish between multiple audio capable displays that can be
connected to a port. Currently only the port identity is shared in the
APIs. This patch adds support for MST with an additional parameter
'int pipe'. The existing parameter 'port' does not change it's meaning.
pipe =
MST : display pipe that the stream originates from
Non-MST : -1
Affected APIs:
struct i915_audio_component_ops
- int (*sync_audio_rate)(struct device *, int port, int rate);
+ int (*sync_audio_rate)(struct device *, int port, int pipe,
+ int rate);
- int (*get_eld)(struct device *, int port, bool *enabled,
- unsigned char *buf, int max_bytes);
+ int (*get_eld)(struct device *, int port, int pipe,
+ bool *enabled, unsigned char *buf, int max_bytes);
struct i915_audio_component_audio_ops
- void (*pin_eld_notify)(void *audio_ptr, int port);
+ void (*pin_eld_notify)(void *audio_ptr, int port, int pipe);
This patch makes dummy changes in the audio drivers (thanks Libin) for
build to succeed. The audio side drivers will send the right 'pipe' values
for MST in patches that will follow.
v2:
Renamed the new API parameter from 'dev_id' to 'pipe'. (Jim, Ville)
Included Asoc driver API compatibility changes from Jeeja.
Added WARN_ON() for invalid pipe in get_saved_encoder(). (Takashi)
Added comment for av_enc_map[] definition. (Takashi)
v3:
Fixed logic error introduced while renaming 'dev_id' as 'pipe' (Ville)
Renamed get_saved_encoder() to get_saved_enc() to reduce line length
v4:
Rebased.
Parameter check for pipe < -1 values in get_saved_enc() (Ville)
Switched to for_each_pipe() in get_saved_enc() (Ville)
Renamed 'pipe' to 'dev_id' in audio side code (Takashi)
v5:
Included a comment for the dev_id arg. (Libin)
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474488168-2343-1-git-send-email-dhinakaran.pandiyan@intel.com
asm-generic is only intended for architecture defaults, and we can simply
kill it off by moving the two defintions directly to <linux/libata.h>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull networking fixes from David Miller:
"Mostly small bits scattered all over the place, which is usually how
things go this late in the -rc series.
1) Proper driver init device resets in bnx2, from Baoquan He.
2) Fix accounting overflow in __tcp_retransmit_skb(),
sk_forward_alloc, and ip_idents_reserve, from Eric Dumazet.
3) Fix crash in bna driver ethtool stats handling, from Ivan Vecera.
4) Missing check of skb_linearize() return value in mac80211, from
Johannes Berg.
5) Endianness fix in nf_table_trace dumps, from Liping Zhang.
6) SSN comparison fix in SCTP, from Marcelo Ricardo Leitner.
7) Update DSA and b44 MAINTAINERS entries.
8) Make input path of vti6 driver work again, from Nicolas Dichtel.
9) Off-by-one in mlx4, from Sebastian Ott.
10) Fix fallback route lookup handling in ipv6, from Vincent Bernat.
11) Fix stack corruption on probe in qed driver, from Yuval Mintz.
12) PHY init fixes in r8152 from Hayes Wang.
13) Missing SKB free in irda_accept error path, from Phil Turnbull"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (61 commits)
tcp: properly account Fast Open SYN-ACK retrans
tcp: fix under-accounting retransmit SNMP counters
MAINTAINERS: Update b44 maintainer.
net: get rid of an signed integer overflow in ip_idents_reserve()
net/mlx4_core: Fix to clean devlink resources
net: can: ifi: Configure transmitter delay
vti6: fix input path
ipmr, ip6mr: return lastuse relative to now
r8152: disable ALDPS and EEE before setting PHY
r8152: remove r8153_enable_eee
r8152: move PHY settings to hw_phy_cfg
r8152: move enabling PHY
r8152: move some functions
cxgb4/cxgb4vf: Allocate more queues for 25G and 100G adapter
qed: Fix stack corruption on probe
MAINTAINERS: Add an entry for the core network DSA code
net: ipv6: fallback to full lookup if table lookup is unsuitable
net/mlx5: E-Switch, Handle mode change failures
net/mlx5: E-Switch, Fix error flow in the SRIOV e-switch init code
net/mlx5: Fix flow counter bulk command out mailbox allocation
...
Currently we do not know what variant (bit length) of the nec protocol
is used, other than from guessing from the length of the scancode. Now
nec will be handled the same way as the sony protocol or the rc6 protocol;
one variant per bit length.
In the future we might want to expose the rc protocol type to userspace
and we don't want to be introducing this world of pain into userspace
too.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add support of an offset value for incremental counter and random. With
this option the sysadmin is able to start the counter to a certain value
and then apply the generated number.
Example:
meta mark set numgen inc mod 2 offset 100
This will generate marks with the serie 100, 101, 100, 101, ...
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Replace the block-mq notifier list management with the multi instance
facility in the cpu hotplug state machine.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-block@vger.kernel.org
Cc: rt@linutronix.de
Cc: Christoph Hellwing <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
bio_free_pages is introduced in commit 1dfa0f68c0
("block: add a helper to free bio bounce buffer pages"),
we can reuse the func in other modules after it was
imported.
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Shaohua Li <shli@fb.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Acked-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
It is now unused, remove it before someone else thinks its a good idea
to use this.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
stop_two_cpus() and stop_cpus() use stop_cpus_lock to avoid the deadlock,
we need to ensure that the stopper functions can't be queued "backwards"
from one another. This doesn't look nice; if we use lglock then we do not
really need stopper->lock, cpu_stop_queue_work() could use lg_local_lock()
under local_irq_save().
OTOH it would be even better to avoid lglock in stop_machine.c and remove
lg_double_lock(). This patch adds "bool stop_cpus_in_progress" set/cleared
by queue_stop_cpus_work(), and changes cpu_stop_queue_two_works() to busy
wait until it is cleared.
queue_stop_cpus_work() sets stop_cpus_in_progress = T lockless, but after
it queues a work on CPU1 it must be visible to stop_two_cpus(CPU1, CPU2)
which checks it under the same lock. And since stop_two_cpus() holds the
2nd lock too, queue_stop_cpus_work() can not clear stop_cpus_in_progress
if it is also going to queue a work on CPU2, it needs to take that 2nd
lock to do this.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20151121181148.GA433@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Provide a down_read()/up_read() variant that keeps preemption disabled
over the whole thing, when possible.
This avoids a needless preemption point for constructs such as:
percpu_down_read(&global_rwsem);
spin_lock(&lock);
...
spin_unlock(&lock);
percpu_up_read(&global_rwsem);
Which perturbs timings. In particular it was found to cure a
performance regression in a follow up patch in fs/locks.c
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
As warned by linuxdoc[1] tool, using:
$ for i in $(git grep kernel-doc Documentation/media/kapi/|cut -d: -f4); do kernel-lintdoc --sloppy $i; done
include/media/v4l2-dev.h:118 :WARN: function name from comment differs: v4l2_prio_close <--> v4l2_prio_check
include/media/v4l2-mc.h:56 [kernel-doc WARN] : enum name from comment differs: if_vid_dec_index <--> if_vid_dec_pad_index
include/media/v4l2-mc.h:71 [kernel-doc WARN] : enum name from comment differs: if_aud_dec_index <--> if_aud_dec_pad_index
include/media/v4l2-mem2mem.h:396 [kernel-doc WARN] : function name from comment differs: v4l2_m2m_num_src_bufs_ready <--> v4l2_m2m_num_dst_bufs_ready
drivers/media/dvb-core/dvb_math.h:28 [kernel-doc WARN] : function name from comment differs: cintlog2 <--> intlog2
include/media/v4l2-subdev.h:215 [kernel-doc WARN] : struct name from comment differs: s_radio <--> v4l2_subdev_tuner_ops
include/media/v4l2-subdev.h:890 [kernel-doc WARN] : function name from comment differs: v4l2_set_subdevdata <--> v4l2_set_subdev_hostdata
include/media/v4l2-subdev.h:901 [kernel-doc WARN] : function name from comment differs: v4l2_get_subdevdata <--> v4l2_get_subdev_hostdata
drivers/media/dvb-core/dvb_ringbuffer.h:196 [kernel-doc WARN] : function name from comment differs: dvb_ringbuffer_writeuser <--> dvb_ringbuffer_write_user
include/media/videobuf2-core.h:399 [kernel-doc WARN] : struct name from comment differs: vb2_ops <--> vb2_buf_ops
include/media/media-entity.h:132 [kernel-doc ERROR] : duplicate parameter definition 'source'
include/media/media-entity.h:477 [kernel-doc WARN] : function name from comment differs: media_entity_enum_test <--> media_entity_enum_test_and_set
include/media/media-entity.h:535 [kernel-doc WARN] : function name from comment differs: gobj_to_entity <--> gobj_to_pad
include/media/media-entity.h:544 [kernel-doc WARN] : function name from comment differs: gobj_to_entity <--> gobj_to_link
include/media/media-entity.h:553 [kernel-doc WARN] : function name from comment differs: gobj_to_entity <--> gobj_to_intf
include/media/media-entity.h:562 [kernel-doc WARN] : function name from comment differs: gobj_to_entity <--> intf_to_devnode
include/media/rc-core.h:234 [kernel-doc WARN] : function name from comment differs: rc_open <--> rc_close
include/media/v4l2-ctrls.h:397 [kernel-doc WARN] : missing initial short description of 'v4l2_ctrl_handler_init'
include/media/v4l2-dev.h:118 [kernel-doc WARN] : function name from comment differs: v4l2_prio_close <--> v4l2_prio_check
include/media/v4l2-event.h:225 [kernel-doc WARN] : missing initial short description of 'v4l2_src_change_event_subscribe'
[1] https://return42.github.io/linuxdoc/linux.html
The above are real issues at the documentation. On several cases,
caused by cut-and-paste.
Fix them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
On fully preemptible kernels _cond_resched() is pointless, so avoid
emitting any code for it.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Oleg noted that by making do_exit() use __schedule() for the TASK_DEAD
context switch, we can avoid the TASK_DEAD special case currently in
__schedule() because that avoids the extra preempt_disable() from
schedule().
In order to facilitate this, create a do_task_dead() helper which we
place in the scheduler code, such that it can access __schedule().
Also add some __noreturn annotations to the functions, there's no
coming back from do_exit().
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Cheng Chao <cs.os.kernel@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: akpm@linux-foundation.org
Cc: chris@chris-wilson.co.uk
Cc: tj@kernel.org
Link: http://lkml.kernel.org/r/20160913163729.GB5012@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Enabling -ffunction-sections modified the generic linker script to
pull .text.* sections into regular TEXT_TEXT section, conflicting
with some architectures. Revert that change and require archs that
enable the option to ensure they have no conflicting section names,
and do the appropriate merging.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Fixes: b67067f117 ("kbuild: allow archs to select link dead code/data elimination")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
