Let's restore some of the #defines that have been savagely dropped
by the introduction of the KVM ITS code, as pointlessly break
other users (including series that are already in -next).
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Now that all ITS emulation functionality is in place, we advertise
MSI functionality to userland and also the ITS device to the guest - if
userland has configured that.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
LPIs are dynamically created (mapped) at guest runtime and their
actual number can be quite high, but is mostly assigned using a very
sparse allocation scheme. So arrays are not an ideal data structure
to hold the information.
We use a spin-lock protected linked list to hold all mapped LPIs,
represented by their struct vgic_irq. This lock is grouped between the
ap_list_lock and the vgic_irq lock in our locking order.
Also we store a pointer to that struct vgic_irq in our struct its_itte,
so we can easily access it.
Eventually we call our new vgic_get_lpi() from vgic_get_irq(), so
the VGIC code gets transparently access to LPIs.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Add emulation for some basic MMIO registers used in the ITS emulation.
This includes:
- GITS_{CTLR,TYPER,IIDR}
- ID registers
- GITS_{CBASER,CREADR,CWRITER}
(which implement the ITS command buffer handling)
- GITS_BASER<n>
Most of the handlers are pretty straight forward, only the CWRITER
handler is a bit more involved by taking the new its_cmd mutex and
then iterating over the command buffer.
The registers holding base addresses and attributes are sanitised before
storing them.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Introduce a new KVM device that represents an ARM Interrupt Translation
Service (ITS) controller. Since there can be multiple of this per guest,
we can't piggy back on the existing GICv3 distributor device, but create
a new type of KVM device.
On the KVM_CREATE_DEVICE ioctl we allocate and initialize the ITS data
structure and store the pointer in the kvm_device data.
Upon an explicit init ioctl from userland (after having setup the MMIO
address) we register the handlers with the kvm_io_bus framework.
Any reference to an ITS thus has to go via this interface.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The ARM GICv3 ITS emulation code goes into a separate file, but needs
to be connected to the GICv3 emulation, of which it is an option.
The ITS MMIO handlers require the respective ITS pointer to be passed in,
so we amend the existing VGIC MMIO framework to let it cope with that.
Also we introduce the basic ITS data structure and initialize it, but
don't return any success yet, as we are not yet ready for the show.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
In the GICv3 redistributor there are the PENDBASER and PROPBASER
registers which we did not emulate so far, as they only make sense
when having an ITS. In preparation for that emulate those MMIO
accesses by storing the 64-bit data written into it into a variable
which we later read in the ITS emulation.
We also sanitise the registers, making sure RES0 regions are respected
and checking for valid memory attributes.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
arm-gic-v3.h contains bit and register definitions for the GICv3 and ITS,
at least for the bits the we currently care about.
The ITS emulation needs more definitions, so add them and refactor
the memory attribute #defines to be more universally usable.
To avoid changing all users, we still provide some of the old definitons
defined with the help of the new macros.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
In the moment our struct vgic_irq's are statically allocated at guest
creation time. So getting a pointer to an IRQ structure is trivial and
safe. LPIs are more dynamic, they can be mapped and unmapped at any time
during the guest's _runtime_.
In preparation for supporting LPIs we introduce reference counting for
those structures using the kernel's kref infrastructure.
Since private IRQs and SPIs are statically allocated, we avoid actually
refcounting them, since they would never be released anyway.
But we take provisions to increase the refcount when an IRQ gets onto a
VCPU list and decrease it when it gets removed. Also this introduces
vgic_put_irq(), which wraps kref_put and hides the release function from
the callers.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The kvm_io_bus framework is a nice place of holding information about
various MMIO regions for kernel emulated devices.
Add a call to retrieve the kvm_io_device structure which is associated
with a certain MMIO address. This avoids to duplicate kvm_io_bus'
knowledge of MMIO regions without having to fake MMIO calls if a user
needs the device a certain MMIO address belongs to.
This will be used by the ITS emulation to get the associated ITS device
when someone triggers an MSI via an ioctl from userspace.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The ARM GICv3 ITS MSI controller requires a device ID to be able to
assign the proper interrupt vector. On real hardware, this ID is
sampled from the bus. To be able to emulate an ITS controller, extend
the KVM MSI interface to let userspace provide such a device ID. For
PCI devices, the device ID is simply the 16-bit bus-device-function
triplet, which should be easily available to the userland tool.
Also there is a new KVM capability which advertises whether the
current VM requires a device ID to be set along with the MSI data.
This flag is still reported as not available everywhere, later we will
enable it when ITS emulation is used.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Logically a GICv3 redistributor is assigned to a (v)CPU, so we should
aim to keep redistributor related variables out of our struct vgic_dist.
Let's start by replacing the redistributor related kvm_io_device array
with two members in our existing struct vgic_cpu, which are naturally
per-VCPU and thus don't require any allocation / freeing.
So apart from the better fit with the redistributor design this saves
some code as well.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The MT6323 is a regulator found on boards based on MediaTek MT7623 and
probably other SoCs. It is a so called pmic and connects as a slave to
SoC using SPI, wrapped inside the pmic-wrapper.
Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
We will use illegal instruction 0x0000 for handling 2 byte sw breakpoints
from user space. As it can be enabled dynamically via a capability,
let's move setting of ICTL_OPEREXC to the post creation step, so we avoid
any races when enabling that capability just while adding new cpus.
Acked-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch inlines the functions scatterwalk_start, scatterwalk_map
and scatterwalk_done as they're all tiny and mostly used by the block
cipher walker.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When hard preemption is enabled there is no need to explicitly
call crypto_yield. This patch eliminates it if that is the case.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch removes the now unused scatterwalk_bytes_sglen. Anyone
using this out-of-tree should switch over to sg_nents_for_len.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch removes the old crypto_grab_skcipher helper and replaces
it with crypto_grab_skcipher2.
As this is the final entry point into givcipher this patch also
removes all traces of the top-level givcipher interface, including
all implicit IV generators such as chainiv.
The bottom-level givcipher interface remains until the drivers
using it are converted.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds an skcipher null object alongside the existing
null blkcipher so that IV generators using it can switch over
to skcipher.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds a chunk size parameter to aead algorithms, just
like the chunk size for skcipher algorithms.
However, unlike skcipher we do not currently export this to AEAD
users. It is only meant to be used by AEAD implementors for now.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Current the default null skcipher is actually a crypto_blkcipher.
This patch creates a synchronous crypto_skcipher version of the
null cipher which unfortunately has to settle for the name skcipher2.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch allows skcipher algorithms and instances to be created
and registered with the crypto API. They are accessible through
the top-level skcipher interface, along with ablkcipher/blkcipher
algorithms and instances.
This patch also introduces a new parameter called chunk size
which is meant for ciphers such as CTR and CTS which ostensibly
can handle arbitrary lengths, but still behave like block ciphers
in that you can only process a partial block at the very end.
For these ciphers the block size will continue to be set to 1
as it is now while the chunk size will be set to the underlying
block size.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
vGEM buffers are useful for passing data between software clients and
hardware renders. By allowing the user to create and attach fences to
the exported vGEM buffers (on the dma-buf), the user can implement a
deferred renderer and queue hardware operations like flipping and then
signal the buffer readiness (i.e. this allows the user to schedule
operations out-of-order, but have them complete in-order).
This also makes it much easier to write tightly controlled testcases for
dma-buf fencing and signaling between hardware drivers.
v2: Don't pretend the fences exist in an ordered timeline, but allocate
a separate fence-context for each fence so that the fences are
unordered.
v3: Make the debug output more interesting, and show the signaled status.
v4: Automatically signal the fence to prevent userspace from
indefinitely hanging drivers.
Testcase: igt/vgem_basic/dmabuf-fence
Testcase: igt/vgem_slow/nohang
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Zach Reizner <zachr@google.com>
Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Zach Reizner <zachr@google.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468571471-12610-1-git-send-email-chris@chris-wilson.co.uk
The chip can drive 2 sets of RGB leds. Controller can
be controlled via PWM, I2C and audio synchronisation.
This driver uses I2C to communicate with the chip.
Datasheet: http://www.ti.com/lit/gpn/lp3952
Signed-off-by: Tony Makkiel <tony.makkiel@daqri.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Some Bluetooth controllers allow for reading hardware and firmware
related vendor specific infos. If they are available, then they can be
exposed via debugfs now.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The protoypes for hci_recv_frame and hci_recv_diag are in the wrong
location in the header file. Move them close to all the other hci_dev
related exported functions.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The description of min_hw_heartbeat_ms is misleading and needs some
improvements.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
This helps in reducing code in .remove callbacks and sometimes
dropping .remove callbacks entirely.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
On mips and parisc:
drivers/bluetooth/btwilink.c: In function 'ti_st_open':
drivers/bluetooth/btwilink.c:174:21: warning: overflow in implicit constant conversion [-Woverflow]
hst->reg_status = -EINPROGRESS;
drivers/nfc/nfcwilink.c: In function 'nfcwilink_open':
drivers/nfc/nfcwilink.c:396:31: warning: overflow in implicit constant conversion [-Woverflow]
drv->st_register_cb_status = -EINPROGRESS;
There are actually two issues:
1. Whether "char" is signed or unsigned depends on the architecture.
As the completion callback data is used to pass a (negative) error
code, it should always be signed.
2. EINPROGRESS is 150 on mips, 245 on parisc.
Hence -EINPROGRESS doesn't fit in a signed 8-bit number.
Change the callback status from "char" to "int" to fix these.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Add a new read function to the at24 driver allowing to retrieve the
factory-programmed mac address embedded in chips from the at24mac
family.
These chips can be instantiated similarily to the at24cs family,
except that there's no way of having access to both the serial number
and the mac address at the same time - the user must instantiate
either an at24cs or at24mac device as both special memory areas are
accessible on the same slave address.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
The chips from the at24cs family have two memory areas - a regular
read-write block and a read-only area containing the serial number.
The latter is visible on a different slave address (the address of the
rw memory block + 0x08). In order to access both blocks the user needs
to instantiate a regular at24c device for the rw block address and a
corresponding at24cs device on the serial number block address.
Add a function that allows to access the serial number and assign it
to at24->read_func if the chip allows serial number read operations
and the driver was passed the relevant flag for this device.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Use BIT() macro to replace the 0xXX constants in platform_data flags
definitions.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
There were lots of issues at the media controller side,
after the conversion:
- Some documentation at the header files weren't using the
kernel-doc start block;
- Now, the C files with the exported symbols also need to be
added. So, all headers need to be included twice: one to
get the structs/enums/.. and another one for the functions;
- Notes should use the ReST tag, as kernel-doc doesn't
recognizes it anymore;
- Identation needs to be fixed, as ReST uses it to identify
when a format "tag" ends.
- Fix the cross-references at the media controller description.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The conversion from DocBook lead into some conversion issues,
basically due to the lack of proper support at kernel-doc.
So, address them:
- Now, the C files with the exported symbols also need to be
added. So, all headers need to be included twice: one to
get the structs/enums/.. and another one for the functions;
- Notes should use the ReST tag, as kernel-doc doesn't
recognizes it anymore;
- Identation needs to be fixed, as ReST uses it to identify
when a format "tag" ends.
- kernel-doc doesn't escape things like *pointer, so we
need to manually add a escape char before it.
- On some cases, kernel-doc conversion requires violating
the 80-cols, as otherwise it won't properly parse the
source code.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The kernel-doc script is now broken if it doesn't find all
exported symbols documented.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Move the contents of the media section at
DocBooks/DocBook/device-drivers.tmpl to a new ReST book.
For now, the contents is kept as-is. Next patches will fix
the warnings and add cross-references that were removed due to
the conversion.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Abstract a general interface "of_phy_get_and_connect"
for PHY connect. User will have no bother with getting
"phy-mode" and "phy-handle" any more.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dongpo Li <lidongpo@hisilicon.com>
Reviewed-by: Jiancheng Xue <xuejiancheng@hisilicon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for hardware offloading of ipmr/ip6mr we need an
interface that allows to check (and later update) the age of entries.
Relying on stats alone can show activity but not actual age of the entry,
furthermore when there're tens of thousands of entries a lot of the
hardware implementations only support "hit" bits which are cleared on
read to denote that the entry was active and shouldn't be aged out,
these can then be naturally translated into age timestamp and will be
compatible with the software forwarding age. Using a lastuse entry doesn't
affect performance because the members in that cache line are written to
along with the age.
Since all new users are encouraged to use ipmr via netlink, this is
exported via the RTA_EXPIRES attribute.
Also do a minor local variable declaration style adjustment - arrange them
longest to shortest.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
CC: Roopa Prabhu <roopa@cumulusnetworks.com>
CC: Shrijeet Mukherjee <shm@cumulusnetworks.com>
CC: Satish Ashok <sashok@cumulusnetworks.com>
CC: Donald Sharp <sharpd@cumulusnetworks.com>
CC: David S. Miller <davem@davemloft.net>
CC: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
CC: James Morris <jmorris@namei.org>
CC: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
CC: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
macsec can't cope with mtu frames which need vlan tag insertion, and
vlan device set the default mtu equal to the underlying dev's one.
By default vlan over macsec devices use invalid mtu, dropping
all the large packets.
This patch adds a netif helper to check if an upper vlan device
needs mtu reduction. The helper is used during vlan devices
initialization to set a valid default and during mtu updating to
forbid invalid, too bit, mtu values.
The helper currently only check if the lower dev is a macsec device,
if we get more users, we need to update only the helper (possibly
reserving an additional IFF bit).
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
simple-card needs to get its card name.
This patch makes this method simple style standard.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current simple-card is creating dai_link->name / dai_link->stream_name.
These are based on CPU + Codec name, or "fe.CPU" or "be.Codec" if it
was DPCM.
This patch adds asoc_simple_card_set_dailink_name() and set dailink
name as common method.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit e16fb2e635.
Updated documentation from the chip vendor reveals that this clock is
not required for correct operation of the MMC controller. As such, do
not expose it to DT.
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
allowing GLSL shaders with non-unrolled loops.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Qh0U
-----END PGP SIGNATURE-----
Merge tag 'drm-vc4-next-2016-07-15' of https://github.com/anholt/linux into drm-next
This pull request brings in vc4 shader validation for branching,
allowing GLSL shaders with non-unrolled loops.
* tag 'drm-vc4-next-2016-07-15' of https://github.com/anholt/linux:
drm/vc4: Fix a "the the" typo in a comment.
drm/vc4: Fix definition of QPU_R_MS_REV_FLAGS
drm/vc4: Add a getparam to signal support for branches.
drm/vc4: Add support for branching in shader validation.
drm/vc4: Add a bitmap of branch targets during shader validation.
drm/vc4: Move validation's current/max ip into the validation struct.
drm/vc4: Add a getparam ioctl for getting the V3D identity regs.
This set of changes contains a bunch of cleanups to the host1x driver as
well as the addition of a pin controller for DPAUX, which is required by
boards to configure the DPAUX pads in AUX mode (for DisplayPort) or I2C
mode (for HDMI and DDC).
Included is also a bit of rework of the SOR driver in preparation to add
DisplayPort support as well as some refactoring and cleanup.
Finally, all output drivers are converted to runtime PM, which greatly
simplifies the handling of clocks and resets.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABCAAGBQJXh5n1AAoJEN0jrNd/PrOh+KcP/0SLO9UKvGBsfD0EFvkxx/NV
VZvqCWP0ARCGDAZn890O4sqwgHdRDF+hp0HcUt8wDt4o3VTYJIdifr/5tunOZ6+w
1IatWrjJjpyvZs9bveEvtJ8Hbkq5h0esA1StcqheRUiE0o+uQppdWO1NLO+HxssQ
f4qV4GQ7trJQdjr9OGfGJigsvOjwGVbPL7CRrKKLmbfTiqy9zhi5bOyUfojtMEL6
BvH9RMqC0ke70sGtcPgigbL7wgnbkH0uR3sV5TwU5dErrvh0tnhYU1a1ednPotJW
z56+W8hWfC3XLIiU9mju1l+3sQA0BuS9ZQ+6VhdRTKxv85CUI5dUKT0/h5BtRrK9
0XgPwrn4YpAr17oFEGdqFPhefkDkbb/1WrWmgUEi8/YaimdCXNkf8rILZvWUVQdt
q9GbbmEiGNR2FvBEN7s/nT96E5XEzfLTjOzTOP0c5RF9cOK+Ul9t0t44eBn4Wqbk
x6rTv37eieK5RVYd24xKKnzf5uSMpU+RTea4Vpr0xdH6glGcrTJ5ogub0iIsY0Jn
A9M1pKadQvu//95ZzGWEyrqAr66cDG8vGjZn9z24PRaNZEbzvY3ohj2/qOSQoRFY
HPmswshI0DnyFPWmdhhlPy3di0zNDP6kfPo6NhotoAl2Uwd+RrY/VyWjDG0dwV0R
nSkcnGES5hnf3gguXEmO
=7xlG
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-4.8-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Changes for v4.8-rc1
This set of changes contains a bunch of cleanups to the host1x driver as
well as the addition of a pin controller for DPAUX, which is required by
boards to configure the DPAUX pads in AUX mode (for DisplayPort) or I2C
mode (for HDMI and DDC).
Included is also a bit of rework of the SOR driver in preparation to add
DisplayPort support as well as some refactoring and cleanup.
Finally, all output drivers are converted to runtime PM, which greatly
simplifies the handling of clocks and resets.
* tag 'drm/tegra/for-4.8-rc1' of git://anongit.freedesktop.org/tegra/linux: (35 commits)
drm/tegra: sor: Reject HDMI 2.0 modes
drm/tegra: sor: Prepare for generic PM domain support
drm/tegra: dsi: Prepare for generic PM domain support
drm/tegra: sor: Make XBAR configurable per SoC
drm/tegra: sor: Use sor1_src clock to set parent for HDMI
dt-bindings: display: tegra: Add source clock for SOR
drm/tegra: sor: Implement sor1_brick clock
drm/tegra: sor: Implement runtime PM
drm/tegra: hdmi: Implement runtime PM
drm/tegra: dsi: Implement runtime PM
drm/tegra: dc: Implement runtime PM
drm/tegra: hdmi: Enable audio over HDMI
drm/tegra: sor: Do not support deep color modes
drm/tegra: sor: Extract tegra_sor_mode_set()
drm/tegra: sor: Split out tegra_sor_apply_config()
drm/tegra: sor: Rename tegra_sor_calc_config()
drm/tegra: sor: Factor out tegra_sor_set_parent_clock()
drm/tegra: dpaux: Add pinctrl support
dt-bindings: Add bindings for Tegra DPAUX pinctrl driver
drm/tegra: Prepare DPAUX for supporting generic PM domains
...
Please consider merging this tag, which contains the v4 misc fixes and add RK3399 eDP support patches[0] I sent on 2016-06-29, rebased onto v4.7-rc5.
* 'upstream/analogix-dp-20160705' of git://github.com/yakir-Yang/linux:
dt-bindings: analogix_dp: rockchip: correct the wrong compatible name
drm/rockchip: analogix_dp: introduce the pclk for grf
drm/bridge: analogix_dp: fix no drm hpd event when panel plug in
drm/rockchip: analogix_dp: update the comments about why need to hardcode VOP output mode
drm/rockchip: analogix_dp: correct the connector display color format and bpc
drm/bridge: analogix_dp: passing the connector as an argument in .get_modes()
drm/rockchip: analogix_dp: make panel detect to an optional action
drm/rockchip: analogix_dp: add rk3399 eDP support
drm/bridge: analogix_dp: some rockchip chips need to flip REF_CLK bit setting
drm/bridge: analogix_dp: correct the register bit define error in ANALOGIX_DP_PLL_REG_1
drm/rockchip: analogix_dp: split the lcdc select setting into device data
- atomic mode setting conversion
- replace DMFC FIFO allocation mechanism with a fixed allocation
that is good enough for all cases
- support for external bridges connected to parallel-display
- improved error handling in imx-ldb, imx-tve, and parallel-display
- some code cleanup in imx-tve
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=lWas
-----END PGP SIGNATURE-----
Merge tag 'imx-drm-next-2016-07-14' of git://git.pengutronix.de/git/pza/linux into drm-next
imx-drm updates
- atomic mode setting conversion
- replace DMFC FIFO allocation mechanism with a fixed allocation
that is good enough for all cases
- support for external bridges connected to parallel-display
- improved error handling in imx-ldb, imx-tve, and parallel-display
- some code cleanup in imx-tve
* tag 'imx-drm-next-2016-07-14' of git://git.pengutronix.de/git/pza/linux:
drm/imx: parallel-display: add bridge support
drm/imx: parallel-display: check return code from of_get_drm_display_mode()
gpu: ipu-v3: ipu-dc: don't bug out on invalid bus_format
drm/imx: imx-tve: fix the error message
drm/imx: imx-tve: remove unneeded 'or' operation
drm/imx: imx-tve: check the value returned by regulator_set_voltage()
drm/imx: imx-ldb: check return code on panel attach
drm/imx: turn remaining container_of macros into inline functions
drm/imx: store internal bus configuration in crtc state
drm/imx: remove empty mode_set encoder callbacks
drm/imx: atomic phase 3 step 3: Advertise DRIVER_ATOMIC
drm/imx: atomic phase 3 step 2: Legacy callback fixups
drm/bridge: dw-hdmi: Remove the legacy drm_connector_funcs structure
drm/imx: atomic phase 3 step 1: Use atomic configuration
drm/imx: Remove encoders' ->prepare callbacks
drm/imx: atomic phase 2 step 2: Track plane_state->fb correctly in ->page_flip
drm/imx: atomic phase 2 step 1: Wire up state ->reset, ->duplicate and ->destroy
drm/imx: atomic phase 1: Use transitional atomic CRTC and plane helpers
gpu: ipu-v3: ipu-dmfc: Use static DMFC FIFO allocation mechanism
drm/imx: ipuv3 plane: Check different types of plane separately
