When CONFIG_POSIX_TIMERS is disabled, it is preferable to remove related
structures from struct task_struct and struct signal_struct as they
won't contain anything useful and shouldn't be relied upon by mistake.
Code still referencing those structures is also disabled here.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Pull networking fixes from David Miller:
1) GTP fixes from Andreas Schultz (missing genl module alias, clear IP
DF on transmit).
2) Netfilter needs to reflect the fwmark when sending resets, from Pau
Espin Pedrol.
3) nftable dump OOPS fix from Liping Zhang.
4) Fix erroneous setting of VIRTIO_NET_HDR_F_DATA_VALID on transmit,
from Rolf Neugebauer.
5) Fix build error of ipt_CLUSTERIP when procfs is disabled, from Arnd
Bergmann.
6) Fix regression in handling of NETIF_F_SG in harmonize_features(),
from Eric Dumazet.
7) Fix RTNL deadlock wrt. lwtunnel module loading, from David Ahern.
8) tcp_fastopen_create_child() needs to setup tp->max_window, from
Alexey Kodanev.
9) Missing kmemdup() failure check in ipv6 segment routing code, from
Eric Dumazet.
10) Don't execute unix_bind() under the bindlock, otherwise we deadlock
with splice. From WANG Cong.
11) ip6_tnl_parse_tlv_enc_lim() potentially reallocates the skb buffer,
therefore callers must reload cached header pointers into that skb.
Fix from Eric Dumazet.
12) Fix various bugs in legacy IRQ fallback handling in alx driver, from
Tobias Regnery.
13) Do not allow lwtunnel drivers to be unloaded while they are
referenced by active instances, from Robert Shearman.
14) Fix truncated PHY LED trigger names, from Geert Uytterhoeven.
15) Fix a few regressions from virtio_net XDP support, from John
Fastabend and Jakub Kicinski.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (102 commits)
ISDN: eicon: silence misleading array-bounds warning
net: phy: micrel: add support for KSZ8795
gtp: fix cross netns recv on gtp socket
gtp: clear DF bit on GTP packet tx
gtp: add genl family modules alias
tcp: don't annotate mark on control socket from tcp_v6_send_response()
ravb: unmap descriptors when freeing rings
virtio_net: reject XDP programs using header adjustment
virtio_net: use dev_kfree_skb for small buffer XDP receive
r8152: check rx after napi is enabled
r8152: re-schedule napi for tx
r8152: avoid start_xmit to schedule napi when napi is disabled
r8152: avoid start_xmit to call napi_schedule during autosuspend
net: dsa: Bring back device detaching in dsa_slave_suspend()
net: phy: leds: Fix truncated LED trigger names
net: phy: leds: Break dependency of phy.h on phy_led_triggers.h
net: phy: leds: Clear phy_num_led_triggers on failure to avoid crash
net-next: ethernet: mediatek: change the compatible string
Documentation: devicetree: change the mediatek ethernet compatible string
bnxt_en: Fix RTNL lock usage on bnxt_get_port_module_status().
...
- Series of iw_cxgb4 fixes to make it work with the drain cq API
- One or two patches each to: srp, iser, cxgb3, vmw_pvrdma, umem, rxe,
and ipoib
- One big series (13 patches) for the new qedr driver
-----BEGIN PGP SIGNATURE-----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=d5rm
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma fixes from Doug Ledford:
"Second round of -rc fixes for 4.10.
This -rc cycle has been slow for the rdma subsystem. I had already
sent you the first batch before the Holiday break. After that, we kept
only getting a few here or there. Up until this week, when I got a
drop of 13 to one driver (qedr). So, here's the -rc patches I have. I
currently have none held in reserve, so unless something new comes in,
this is it until the next merge window opens.
Summary:
- series of iw_cxgb4 fixes to make it work with the drain cq API
- one or two patches each to: srp, iser, cxgb3, vmw_pvrdma, umem,
rxe, and ipoib
- one big series (13 patches) for the new qedr driver"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (27 commits)
RDMA/cma: Fix unknown symbol when CONFIG_IPV6 is not enabled
IB/rxe: Prevent from completer to operate on non valid QP
IB/rxe: Fix rxe dev insertion to rxe_dev_list
IB/umem: Release pid in error and ODP flow
RDMA/qedr: Dispatch port active event from qedr_add
RDMA/qedr: Fix and simplify memory leak in PD alloc
RDMA/qedr: Fix RDMA CM loopback
RDMA/qedr: Fix formatting
RDMA/qedr: Mark three functions as static
RDMA/qedr: Don't reset QP when queues aren't flushed
RDMA/qedr: Don't spam dmesg if QP is in error state
RDMA/qedr: Remove CQ spinlock from CM completion handlers
RDMA/qedr: Return max inline data in QP query result
RDMA/qedr: Return success when not changing QP state
RDMA/qedr: Add uapi header qedr-abi.h
RDMA/qedr: Fix MTU returned from QP query
RDMA/core: Add the function ib_mtu_int_to_enum
IB/vmw_pvrdma: Fix incorrect cleanup on pvrdma_pci_probe error path
IB/vmw_pvrdma: Don't leak info from alloc_ucontext
IB/cxgb3: fix misspelling in header guard
...
Now that the user can opt-out of implicit fencing, we need to give them
back control over the fencing. We employ sync_file to wrap our
drm_i915_gem_request and provide an fd that userspace can merge with
other sync_file fds and pass back to the kernel to wait upon before
future execution.
Testcase: igt/gem_exec_fence
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Chad Versace <chadversary@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170127094008.27489-2-chris@chris-wilson.co.uk
Userspace is faced with a dilemma. The kernel requires implicit fencing
to manage resource usage (we always must wait for the GPU to finish
before releasing its PTE) and for third parties. However, userspace may
wish to avoid this serialisation if it is either using explicit fencing
between parties and wants more fine-grained access to buffers (e.g. it
may partition the buffer between uses and track fences on ranges rather
than the implicit fences tracking the whole object). It follows that
userspace needs a mechanism to avoid the kernel's serialisation on its
implicit fences before execbuf execution.
The next question is whether this is an object, execbuf or context flag.
Hybrid users (such as using explicit EGL_ANDROID_native_sync fencing on
shared winsys buffers, but implicit fencing on internal surfaces)
require a per-object level flag. Given that this flag need to be only
set once for the lifetime of the object, this reduces the convenience of
having an execbuf or context level flag (and avoids having multiple
pieces of uABI controlling the same feature).
Incorrect use of this flag will result in rendering corruption and GPU
hangs - but will not result in use-after-free or similar resource
tracking issues.
Serious caveat: write ordering is not strictly correct after setting
this flag on a render target on multiple engines. This affects all
subsequent GEM operations (execbuf, set-domain, pread) and shared
dma-buf operations. A fix is possible - but costly (both in terms of
further ABI changes and runtime overhead).
Testcase: igt/gem_exec_async
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Chad Versace <chadversary@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170127094008.27489-1-chris@chris-wilson.co.uk
Port and ACL information must be configured before an initiator
logs in. Make it possible to configure this information before
a subnet prefix has been assigned to a port by not only accepting
GIDs as target port and initiator port names but by also accepting
port GUIDs.
Add a 'priv' member to struct se_wwn to allow target drivers to
associate their own data with struct se_wwn.
Reported-by: Doug Ledford <dledford@redhat.com>
References: http://www.spinics.net/lists/linux-rdma/msg39505.html
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Many times, when a user wants a random number, he wants a random number
of a guaranteed size. So, thinking of get_random_int and get_random_long
in terms of get_random_u32 and get_random_u64 makes it much easier to
achieve this. It also makes the code simpler.
On 32-bit platforms, get_random_int and get_random_long are both aliased
to get_random_u32. On 64-bit platforms, int->u32 and long->u64.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now that our crng uses chacha20, we can rely on its speedy
characteristics for replacing MD5, while simultaneously achieving a
higher security guarantee. Before the idea was to use these functions if
you wanted random integers that aren't stupidly insecure but aren't
necessarily secure either, a vague gray zone, that hopefully was "good
enough" for its users. With chacha20, we can strengthen this claim,
since either we're using an rdrand-like instruction, or we're using the
same crng as /dev/urandom. And it's faster than what was before.
We could have chosen to replace this with a SipHash-derived function,
which might be slightly faster, but at the cost of having yet another
RNG construction in the kernel. By moving to chacha20, we have a single
RNG to analyze and verify, and we also already get good performance
improvements on all platforms.
Implementation-wise, rather than use a generic buffer for both
get_random_int/long and memcpy based on the size needs, we use a
specific buffer for 32-bit reads and for 64-bit reads. This way, we're
guaranteed to always have aligned accesses on all platforms. While
slightly more verbose in C, the assembly this generates is a lot
simpler than otherwise.
Finally, on 32-bit platforms where longs and ints are the same size,
we simply alias get_random_int to get_random_long.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Suggested-by: Theodore Ts'o <tytso@mit.edu>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-----BEGIN PGP SIGNATURE-----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=r51U
-----END PGP SIGNATURE-----
Merge tag 'media/v4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- fix a regression on tvp5150 causing failures at input selection and
image glitches
- CEC was moved out of staging for v4.10. Fix some bugs on it while not
too late
- fix a regression on pctv452e caused by VM stack changes
- fix suspend issued with smiapp
- fix a regression on cobalt driver
- fix some warnings and Kconfig issues with some random configs.
* tag 'media/v4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] s5k4ecgx: select CRC32 helper
[media] dvb: avoid warning in dvb_net
[media] v4l: tvp5150: Don't override output pinmuxing at stream on/off time
[media] v4l: tvp5150: Fix comment regarding output pin muxing
[media] v4l: tvp5150: Reset device at probe time, not in get/set format handlers
[media] pctv452e: move buffer to heap, no mutex
[media] media/cobalt: use pci_irq_allocate_vectors
[media] cec: fix race between configuring and unconfiguring
[media] cec: move cec_report_phys_addr into cec_config_thread_func
[media] cec: replace cec_report_features by cec_fill_msg_report_features
[media] cec: update log_addr[] before finishing configuration
[media] cec: CEC_MSG_GIVE_FEATURES should abort for CEC version < 2
[media] cec: when canceling a message, don't overwrite old status info
[media] cec: fix report_current_latency
[media] smiapp: Make suspend and resume functions __maybe_unused
[media] smiapp: Implement power-on and power-off sequences without runtime PM
The media_entity_pipeline_start() and media_entity_pipeline_stop()
functions are renamed as media_pipeline_start() and media_pipeline_stop(),
respectively. The reason is two-fold: the pipeline struct is, rightly,
already called media_pipeline (rather than media_entity_pipeline) and what
this really is about is a pipeline. A pipeline consists of entities ---
and, well, other objects embedded in these entities.
As the pipeline object will be in the future moved from entities to pads
in order to support multiple pipelines through a single entity, do the
renaming now.
Similarly, functions operating on struct media_entity_graph as well as the
struct itself are renamed by dropping the "entity_" part from the prefix
of the function family and the data structure. The graph traversal which
is what the functions are about is not specifically about entities only
and will operate on pads for the same reason as the media pipeline.
The patch has been generated using the following command:
git grep -l media_entity |xargs perl -i -pe '
s/media_entity_pipeline/media_pipeline/g;
s/media_entity_graph/media_graph/g'
And a few manual edits related to line start alignment and line wrapping.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Without the custom LRU management the callback is not used any more.
agd: fix trivial warning
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-Tested-by: Roger.He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The additional housekeeping had too much CPU overhead,
let's use the BO priorities instead.
agd: also revert hibmc changes
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-Tested-by: Roger.He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This way the driver can specify a priority for a BO which has the effect that
a BO is only evicted when all other BOs with a lower priority are evicted
first.
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roger.He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Slava Shwartsman reported a warning in skb_try_coalesce(), when we
detect skb->truesize is completely wrong.
In his case, issue came from IPv6 reassembly coping with malicious
datagrams, that forced various pskb_may_pull() to reallocate a bigger
skb->head than the one allocated by NIC driver before entering GRO
layer.
Current code does not change skb->truesize, leaving this burden to
callers if they care enough.
Blindly changing skb->truesize in pskb_expand_head() is not
easy, as some producers might track skb->truesize, for example
in xmit path for back pressure feedback (sk->sk_wmem_alloc)
We can detect the cases where it should be safe to change
skb->truesize :
1) skb is not attached to a socket.
2) If it is attached to a socket, destructor is sock_edemux()
My audit gave only two callers doing their own skb->truesize
manipulation.
I had to remove skb parameter in sock_edemux macro when
CONFIG_INET is not set to avoid a compile error.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Slava Shwartsman <slavash@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For reporting things that may or may not be serious, depending on some
condition, netif_cond_dbg will check the condition and print the report
at either dbg (if the condition is true) or the specified level.
Suggested-by: Jon Cooper <jcooper@solarflare.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The stats member of struct frad_locl is used neither by the dlci nor the
sdla driver, so it might as well be removed.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
It's Broadcom PHY simply described as single-port
RGMII 10/100/1000BASE-T PHY. It requires disabling delay skew and GTXCLK
bits.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEES2FAuYbJvAGobdVQPTuqJaypJWoFAliHTm8THG1rbEBwZW5n
dXRyb25peC5kZQAKCRA9O6olrKklajYkB/wOJxby2DFi4ukCPyrTpXtkQWmXa6+M
Wr/nY5PBg88JipQ+u3rl6bW9NMF3U3xtPO6I/ezfn1jfWOTg0jVIecEfqlW8JNAU
275IOaiQ7jYgGEo+ALUAv2kSe7Fl8HQyaq+9ugMkWUTdv5Vjay1GZgCzyKZzjM8q
8UOoB1YsXlB9f230HPMLeHcbGHqHCOpfNk9yWNcbd0Up6U7EweXtK4Pf/L8g+bL1
0LR1QHRoUtmivuIi96KhB7O/+w8WuigWRy7qkfGpFescZQWOHzbwCVHlZ9ZYCOnJ
eGEP8koksJuMg4OoEUCv0k2v3Txnfr8YNC5MvNdQ06YmoBWwQeamCozL
=fBeU
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-4.11-20170124' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2017-01-24
this is a pull request of 4 patches for net-next/master.
The first patch by Oliver Hartkopp adds a netlink API to configure the
interface termination of a CAN card. The next two patches are by me and
add a netlink API to query and configure CAN interfaces that only
support fixed bitrates. The last patch by Colin Ian King simplifies the
return path in the softing_cs driver's softingcs_probe() function.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ensure that the driver can listen to evictions even when they don't take the
path through ttm_bo_driver::move.
This is crucial for amdgpu, which relies on an eviction counter to skip
re-binding page tables when possible.
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Change History
--------------
v4: Changes suggested by Emil, Christian
- return -ENODATA for asics with unlimited sessions
v3: changes suggested by Christian
- Add a check for UVD IP block using AMDGPU_HW_IP_UVD
query type.
- Add a check for asic_type to be less than
CHIP_POLARIS10 since starting Polaris, we support
unlimited UVD instances.
- Add kerneldoc style comment for
amdgpu_uvd_used_handles().
v2: as suggested by Christian
- Add a new query AMDGPU_INFO_NUM_HANDLES
- Create a helper function to return the number
of currently used UVD handles.
- Modify the logic to count the number of used
UVD handles since handles can be freed in
non-linear fashion.
v1:
- User might want to query the maximum number of UVD
instances supported by firmware. In addition to that,
if there are multiple applications using UVD handles
at the same time, he might also want to query the
currently used number of handles.
For this we add two variables max_handles and
used_handles inside drm_amdgpu_info_hw_ip. So now
an application (or libdrm) can use AMDGPU_INFO IOCTL
with AMDGPU_INFO_HW_IP_INFO query type to get these
values.
Signed-off-by: Arindam Nath <arindam.nath@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is adds support for the PHYs in the KSZ8795 5port managed switch.
It will allow to detect the link between the switch and the soc
and uses the same read_status functions as the KSZ8873MLL switch.
Signed-off-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
This centralizes the checks for bios that needs to be go into the flush
state machine.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Unlike ipv4, this control socket is shared by all cpus so we cannot use
it as scratchpad area to annotate the mark that we pass to ip6_xmit().
Add a new parameter to ip6_xmit() to indicate the mark. The SCTP socket
family caches the flowi6 structure in the sctp_transport structure, so
we cannot use to carry the mark unless we later on reset it back, which
I discarded since it looks ugly to me.
Fixes: bf99b4ded5 ("tcp: fix mark propagation with fwmark_reflect enabled")
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The address generation mode for IPv6 link-local can only be configured
by netlink messages. This patch adds the ability to change the address
generation mode via sysctl.
v1 -> v2
Removed the rtnl lock and switch to use RCU lock to iterate through
the netdev list.
v2 -> v3
Removed the addrgenmode variable from the idev structure and use the
systcl storage for the flag.
Simplifed the logic for sysctl handling by removing the supported
for all operation.
Added support for more types of tunnel interfaces for link-local
address generation.
Based the patches from net-next.
v3 -> v4
Removed unnecessary whitespace changes.
Signed-off-by: Felix Jia <felix.jia@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
When we invoke dispatch_requests(), the scheduler empties everything
into the passed in list. This isn't always a good thing, since it
means that we remove items that we could have potentially merged
with.
Change the function to dispatch single requests at the time. If
we do that, we can backoff exactly at the point where the device
can't consume more IO, and leave the rest with the scheduler for
better merging and future dispatch decision making.
Signed-off-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Tested-by: Hannes Reinecke <hare@suse.com>
If we have both multiple hardware queues and shared tag map between
devices, we need to ensure that we propagate the hardware queue
restart bit higher up. This is because we can get into a situation
where we don't have any IO pending on a hardware queue, yet we fail
getting a tag to start new IO. If that happens, it's not enough to
mark the hardware queue as needing a restart, we need to bubble
that up to the higher level queue as well.
Signed-off-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Tested-by: Hannes Reinecke <hare@suse.com>
This is useful debugging information that will be used in the blk-mq
debugfs directory.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Changed 'weight' to 'busy'.
Signed-off-by: Jens Axboe <axboe@fb.com>
In preparation for putting blk-mq debugging information in debugfs,
create a directory tree mirroring the one in sysfs:
# tree -d /sys/kernel/debug/block
/sys/kernel/debug/block
|-- nvme0n1
| `-- mq
| |-- 0
| | `-- cpu0
| |-- 1
| | `-- cpu1
| |-- 2
| | `-- cpu2
| `-- 3
| `-- cpu3
`-- vda
`-- mq
`-- 0
|-- cpu0
|-- cpu1
|-- cpu2
`-- cpu3
Also add the scaffolding for the actual files that will go in here,
either under the hardware queue or software queue directories.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Commit 16e5cc6471 ("net: rework setup_tc ndo op to consume
general tc operand") changed the ndo_setup_tc() signature, but did not
update the comments in netdevice.h, so do that now.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: John Fastabend <john.r.fastabend@intel.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Drop the FSF's postal address from the source code files that typically
contain mostly the license text. Of the 628 removed instances, 578 are
outdated.
The patch has been created with the following command without manual edits:
git grep -l "675 Mass Ave\|59 Temple Place\|51 Franklin St" -- \
drivers/media/ include/media|while read i; do i=$i perl -e '
open(F,"< $ENV{i}");
$a=join("", <F>);
$a =~ s/[ \t]*\*\n.*You should.*\n.*along with.*\n.*(\n.*USA.*$)?\n//m
&& $a =~ s/(^.*)Or, (point your browser to) /$1To obtain the license, $2\n$1/m;
close(F);
open(F, "> $ENV{i}");
print F $a;
close(F);'; done
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Because prototype of OF-graph sound card support didn't have Sound Card
node, commit 8f5ebb1bee
("ASoC: soc-core: adjust for graph on snd_soc_of_parse_card_name")
adjusted to it on each functions.
But final discussion result of ALSA SoC / OF-graph ML, OF-graph sound
card has node. Thus, this commit became no longer needed.
This reverts commit 8f5ebb1bee.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Because prototype of OF-graph sound card support didn't have Sound Card
node, commit b6defcca0a
("ASoC: soc-core: adjust for graph on snd_soc_of_parse_audio_prefix")
adjusted to it on each functions.
But final discussion result of ALSA SoC / OF-graph ML, OF-graph sound
card has node. Thus, this commit became no longer needed.
This reverts commit b6defcca0a.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Because prototype of OF-graph sound card support didn't have Sound Card
node, commit 1ef5bcd57b
("ASoC: soc-core: adjust for graph on snd_soc_of_parse_audio_simple_widgets")
adjusted to it on each functions.
But final discussion result of ALSA SoC / OF-graph ML, OF-graph sound
card has node. Thus, this commit became no longer needed.
This reverts commit 1ef5bcd57b.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Because prototype of OF-graph sound card support didn't have Sound Card
node, commit 7364c8dc25
("ASoC: soc-core: adjust for graph on snd_soc_of_parse_audio_routing")
adjusted to it on each functions.
But final discussion result of ALSA SoC / OF-graph ML, OF-graph sound
card has node. Thus, this commit became no longer needed.
This reverts commit 7364c8dc25.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Let the OPP core provide helpers to register notifiers for any device,
instead of exposing srcu_head outside of the core.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is only one user of dev_pm_opp_get_suspend_opp() and that uses it
to get the OPP rate for the suspend_opp.
Rename dev_pm_opp_get_suspend_opp() as dev_pm_opp_get_suspend_opp_freq()
and return the rate directly from it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add missing identifiers for phyclk_mipidphy0_bitclkdiv8_phy and
phyclk_mipidphy0_rxclkesc0_phy clocks. Access to those clocks is needed
to setup initial clock configuration for display subsystem in device tree
in order to avoid dependency on the configuration left by the bootloader.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
The function is not that big, but it's also not used for anything
performance critical. Make it a normal function.
As a side effect, this apparently makes sparse smarter about what it's
doing, and gets rid of the warning:
./include/drm/drm_color_mgmt.h:53:28: warning: shift too big (4294967295) for type unsigned long
./include/drm/drm_color_mgmt.h:53:28: warning: cast truncates bits from constant value (8000000000000000 becomes 0)
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1485164579-16250-1-git-send-email-jani.nikula@intel.com
pm_qos.h does not use any miscdevice, so this patch
remove this unnecessary inclusion.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The register ARM_L2_OPTION (0x2608 in Exynos4 and Exynos5 PMU) was
defined twice. Both names were used in the Exynos542x code. Simplify
this.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The exynos-regs-pmu.h was never a complete list of PMU registers. It
contained a lot of holes for registers which were not used. However, a
lot of unused defines came along with porting the code from vendor
kernel. Few of defines were also duplicated.
Remove them so the file will be slightly smaller.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Vivante GC hardware uses simple 4x4 tiled and nested 64x64 supertiled
formats as well as so-called split-tiled variants for dual-pipe
hardware, where even and odd tiles start at different base addresses.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-By: Wladimir J. van der Laan <laanwj@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126153217.26916-1-p.zabel@pengutronix.de
- cleanups&fixes for dw-hdmi bride driver (Laurent)
- updates for adv bridge driver (John Stultz) for nexus
- drm_crtc_from_index helper rollout (Shawn Guo)
- removing drm_framebuffer_unregister_private from drivers&core
- target_vblank (Andrey Grodzovsky)
- misc tiny stuff
* tag 'drm-misc-next-2017-01-23' of git://anongit.freedesktop.org/git/drm-misc: (49 commits)
drm: qxl: Open code teardown function for qxl
drm: qxl: Open code probing sequence for qxl
drm/bridge: adv7511: Re-write the i2c address before EDID probing
drm/bridge: adv7511: Reuse __adv7511_power_on/off() when probing EDID
drm/bridge: adv7511: Rework adv7511_power_on/off() so they can be reused internally
drm/bridge: adv7511: Enable HPD interrupts to support hotplug and improve monitor detection
drm/bridge: adv7511: Switch to using drm_kms_helper_hotplug_event()
drm/bridge: adv7511: Use work_struct to defer hotplug handing to out of irq context
drm: vc4: use crtc helper drm_crtc_from_index()
drm: tegra: use crtc helper drm_crtc_from_index()
drm: nouveau: use crtc helper drm_crtc_from_index()
drm: mediatek: use crtc helper drm_crtc_from_index()
drm: kirin: use crtc helper drm_crtc_from_index()
drm: exynos: use crtc helper drm_crtc_from_index()
dt-bindings: display: dw-hdmi: Clean up DT bindings documentation
drm: bridge: dw-hdmi: Assert SVSRET before resetting the PHY
drm: bridge: dw-hdmi: Fix the name of the PHY reset macros
drm: bridge: dw-hdmi: Define and use macros for PHY register addresses
drm: bridge: dw-hdmi: Detect PHY type at runtime
drm: bridge: dw-hdmi: Handle overflow workaround based on device version
...
Final block of feature work for 4.11:
- gen8 pd cleanup from Matthew Auld
- more cleanups for view/vma (Chris)
- dmc support on glk (Anusha Srivatsa)
- use core crc api (Tomue)
- track wedged requests using fence.error (Chris)
- lots of psr fixes (Nagaraju, Vathsala)
- dp mst support, acked for merging through drm-intel by Takashi
(Libin)
- huc loading support, including uapi for libva to use it (Anusha
Srivatsa)
* tag 'drm-intel-next-2017-01-23' of git://anongit.freedesktop.org/git/drm-intel: (111 commits)
drm/i915: Update DRIVER_DATE to 20170123
drm/i915: reinstate call to trace_i915_vma_bind
drm/i915: Assert that created vma has a whole number of pages
drm/i915: Assert the drm_mm_node is allocated when on the VM lists
drm/i915: Treat an error from i915_vma_instance() as unlikely
drm/i915: Reject vma creation larger than address space
drm/i915: Use common LRU inactive vma bumping for unpin_from_display
drm/i915: Do an unlocked wait before set-cache-level ioctl
drm/i915/huc: Assert that HuC vma is placed in GuC accessible range
drm/i915/huc: Avoid attempting to authenticate non-existent fw
drm/i915: Set adjustment to zero on Up/Down interrupts if freq is already max/min
drm/i915: Remove the double handling of 'flags from intel_mode_from_pipe_config()
drm/i915: Remove crtc->config usage from intel_modeset_readout_hw_state()
drm/i915: Release temporary load-detect state upon switching
drm/i915: Remove i915_gem_object_to_ggtt()
drm/i915: Remove i915_vma_create from VMA API
drm/i915: Add a check that the VMA instance we lookup matches the request
drm/i915: Rename some warts in the VMA API
drm/i915: Track pinned vma in intel_plane_state
drm/i915/get_params: Add HuC status to getparams
...
-----BEGIN PGP SIGNATURE-----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=rm2F
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-for-v4.10-rc6-part-two' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"This is the main request for rc6, since really the one earlier was the
rc5 one :-)
The main thing are the nouveau specific race fixes for the connector
locking bug we fixed in -next and reverted here as it has quite large
prereqs. These two fixes should solve the problem at that level and we
can fix it properly in 4.11
Otherwise i915 has a bunch of changes, one ABI change for GVT related
stuff, some VC4 leak fixes, one core fence fix and some AMD changes,
oh and one ast hang avoidance fix.
Hoping it calms down around now"
* tag 'drm-fixes-for-v4.10-rc6-part-two' of git://people.freedesktop.org/~airlied/linux: (25 commits)
drm/nouveau: Handle fbcon suspend/resume in seperate worker
drm/nouveau: Don't enabling polling twice on runtime resume
drm/ast: Fixed system hanged if disable P2A
Revert "drm/radeon: always apply pci shutdown callbacks"
drm/i915: reinstate call to trace_i915_vma_bind
drm/i915: Move atomic state free from out of fence release
drm/i915: Check for NULL atomic state in intel_crtc_disable_noatomic()
drm/i915: Fix calculation of rotated x and y offsets for planar formats
drm/i915: Don't init hpd polling for vlv and chv from runtime_suspend()
drm/i915: Don't leak edid in intel_crt_detect_ddc()
drm/i915: Release temporary load-detect state upon switching
drm/i915: prevent crash with .disable_display parameter
drm/i915: Avoid drm_atomic_state_put(NULL) in intel_display_resume
MAINTAINERS: update new mail list for intel gvt driver
drm/i915/gvt: Fix kmem_cache_create() name
drm/i915/gvt/kvmgt: mdev ABI is available_instances, not available_instance
drm/amdgpu: fix unload driver issue for virtual display
drm/amdgpu: check ring being ready before using
drm/vc4: Return -EINVAL on the overflow checks failing.
drm/vc4: Fix an integer overflow in temporary allocation layout.
...
This reverts commit 54a07c7bb0,
and reinstates the original.
[airlied: this might be a bad plan for git].
commit 3846fd9b86
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Wed Jan 11 10:01:17 2017 +0100
drm/probe-helpers: Drop locking from poll_enable
It was only needed to protect the connector_list walking, see
commit 8c4ccc4ab6
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Jul 9 23:44:26 2015 +0200
drm/probe-helper: Grab mode_config.mutex in poll_init/enable
Unfortunately the commit message of that patch fails to mention that
the new locking check was for the connector_list.
But that requirement disappeared in
commit c36a3254f7
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Dec 15 16:58:43 2016 +0100
drm: Convert all helpers to drm_connector_list_iter
and so we can drop this again.
This fixes a locking inversion on nouveau, where the rpm code needs to
re-enable. But in other places the rpm_get() calls are nested within
the big modeset locks.
While at it, also improve the kerneldoc for these two functions a
notch.
v2: Update the kerneldoc even more to explain that these functions
can't be called concurrently, or bad things happen (Chris).
- Revert the recent change that caused suspend-to-idle to be used
as the default suspend method on systems where it is indicated to
be efficient by the ACPI tables, as that turned out to be premature
and introduced suspend regressions on some systems with missing
power management support in device drivers (Rafael Wysocki).
- Fix up the intel_pstate driver to take changes of the global
limits via sysfs correctly when the performance policy is used
which has been broken by a recent change in it (Srinivas Pandruvada).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=YF+u
-----END PGP SIGNATURE-----
Merge tag 'pm-4.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two regressions introduced recently, one by reverting the
problematic commit and one by fixing up the behavior in an overlooked
case.
Specifics:
- Revert the recent change that caused suspend-to-idle to be used as
the default suspend method on systems where it is indicated to be
efficient by the ACPI tables, as that turned out to be premature
and introduced suspend regressions on some systems with missing
power management support in device drivers (Rafael Wysocki).
- Fix up the intel_pstate driver to take changes of the global limits
via sysfs correctly when the performance policy is used which has
been broken by a recent change in it (Srinivas Pandruvada)"
* tag 'pm-4.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Fix sysfs limits enforcement for performance policy
Revert "PM / sleep / ACPI: Use the ACPI_FADT_LOW_POWER_S0 flag"
