There are a few places where an IE that matches not only the EID, but
also other bytes inside the element, needs to be found. To simplify
that and reduce the amount of similar code, implement a new helper
function to match the EID and an extra array of bytes.
Additionally, simplify cfg80211_find_vendor_ie() by using the new
match function.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Hard-coded pinctrl configuration values are scattered through DTS files.
The numbers are difficult to decode by human, especially without the
datasheet. Additionally the drive strength differs between S3C64xx,
S5PV210 and Exynos SoC families increasing the confusion.
The header will help making this more readable and maintainable.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
We currently only support masking the top bit for read and write
flags. Let's make the mask unsigned long and mask the bytes based
on the configured register length to make things more generic.
This allows using regmap for more exotic combinations like SPI
devices that need little endian addressing.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify spi_write() and spi_read() using the spi_sync_transfer()
helper.
This requires moving spi_sync_transfer() up.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
d_op->d_real() leaves the dentry alone except if the third argument is
non-zero. Unfortunately very difficult to explain to the compiler without
a cast.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Acked-by: Jeff Layton <jlayton@poochiereds.net>
This patch allows flock, posix locks, ofd locks and leases to work
correctly on overlayfs.
Instead of using the underlying inode for storing lock context use the
overlay inode. This allows locks to be persistent across copy-up.
This is done by introducing locks_inode() helper and using it instead of
file_inode() to get the inode in locking code. For non-overlayfs the two
are equivalent, except for an extra pointer dereference in locks_inode().
Since lock operations are in "struct file_operations" we must also make
sure not to call underlying filesystem's lock operations. Introcude a
super block flag MS_NOREMOTELOCK to this effect.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Acked-by: Jeff Layton <jlayton@poochiereds.net>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
When an event occurs direct it to the overlay inode instead of the real
underlying inode.
This will work even if the file was first on the lower layer and then
copied up, while the watch is there. This is because the watch is on the
overlay inode, which stays the same through the copy-up.
For filesystems other than overlayfs this is a no-op, except for the
performance impact of an extra pointer dereferece.
Verified to work correctly with the inotify/fanotify tests in LTP.
Signed-off-by: Aihua Zhang <zhangaihua1@huawei.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Eric Paris <eparis@redhat.com>
On overlayfs relatime_need_update() needs inode times to be correct on
overlay inode. But i_mtime and i_ctime are updated by filesystem code on
underlying inode only, so they will be out-of-date on the overlay inode.
This patch copies the times from the underlying inode if needed. This
can't be done if called from RCU lookup (link following) but link m/ctime
are not updated by fs, so this is all right.
This patch doesn't change functionality for anything but overlayfs.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This fixes a bug where the permission was not properly checked in
overlayfs. The testcase is ltp/utimensat01.
It is also cleaner and safer to do the permission checking in the vfs
helper instead of the caller.
This patch introduces an additional ia_valid flag ATTR_TOUCH (since
touch(1) is the most obvious user of utimes(NULL)) that is passed into
notify_change whenever the conditions for this special permission checking
mode are met.
Reported-by: Aihua Zhang <zhangaihua1@huawei.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Tested-by: Aihua Zhang <zhangaihua1@huawei.com>
Cc: <stable@vger.kernel.org> # v3.18+
With our DMA ops enabled for PCI devices, we should avoid allocating
IOVAs which a host bridge might misinterpret as peer-to-peer DMA and
lead to faults, corruption or other badness. To be safe, punch out holes
for all of the relevant host bridge's windows when initialising a DMA
domain for a PCI device.
CC: Marek Szyprowski <m.szyprowski@samsung.com>
CC: Inki Dae <inki.dae@samsung.com>
Reported-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
When an MSI doorbell is located downstream of an IOMMU, attaching
devices to a DMA ops domain and switching on translation leads to a rude
shock when their attempt to write to the physical address returned by
the irqchip driver faults (or worse, writes into some already-mapped
buffer) and no interrupt is forthcoming.
Address this by adding a hook for relevant irqchip drivers to call from
their compose_msi_msg() callback, to swizzle the physical address with
an appropriatly-mapped IOVA for any device attached to one of our DMA
ops domains.
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Introduce a common structure to hold the per-device firmware data that
most IOMMU drivers need to keep track of. This enables us to configure
much of that data from common firmware code, and consolidate a lot of
the equivalent implementations, device look-up tables, etc. which are
currently strewn across IOMMU drivers.
This will also be enable us to address the outstanding "multiple IOMMUs
on the platform bus" problem by tweaking IOMMU API calls to prefer
dev->fwspec->ops before falling back to dev->bus->iommu_ops, and thus
gracefully handle those troublesome systems which we currently cannot.
As the first user, hook up the OF IOMMU configuration mechanism. The
driver-defined nature of DT cells means that we still need the drivers
to translate and add the IDs themselves, but future users such as the
much less free-form ACPI IORT will be much simpler and self-contained.
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The PCI msi-map code is already doing double-duty translating IDs and
retrieving MSI parents, which unsurprisingly is the same functionality
we need for the identically-formatted PCI iommu-map property. Drag the
core parsing routine up yet another layer into the general OF-PCI code,
and further generalise it for either kind of lookup in either flavour
of map property.
Acked-by: Rob Herring <robh+dt@kernel.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Add support for the 2-bytes Qualcomm tag that gigabit switches such as
the QCA8337/N might insert when receiving packets, or that we need
to insert while targeting specific switch ports. The tag is inserted
directly behind the ethernet header.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We currently keep every task's stack around until the task_struct
itself is freed. This means that we keep the stack allocation alive
for longer than necessary and that, under load, we free stacks in
big batches whenever RCU drops the last task reference. Neither of
these is good for reuse of cache-hot memory, and freeing in batches
prevents us from usefully caching small numbers of vmalloced stacks.
On architectures that have thread_info on the stack, we can't easily
change this, but on architectures that set THREAD_INFO_IN_TASK, we
can free it as soon as the task is dead.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jann Horn <jann@thejh.net>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/08ca06cde00ebed0046c5d26cbbf3fbb7ef5b812.1474003868.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There are a few places in the kernel that access stack memory
belonging to a different task. Before we can start freeing task
stacks before the task_struct is freed, we need a way for those code
paths to pin the stack.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jann Horn <jann@thejh.net>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/17a434f50ad3d77000104f21666575e10a9c1fbd.1474003868.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull RCU changes from Paul E. McKenney:
- Expedited grace-period changes, most notably avoiding having
user threads drive expedited grace periods, using a workqueue
instead.
- Miscellaneous fixes, including a performance fix for lists
that was sent with the lists modifications (second URL below).
- CPU hotplug updates, most notably providing exact CPU-online
tracking for RCU. This will in turn allow removal of the
checks supporting RCU's prior heuristic that was based on the
assumption that CPUs would take no longer than one jiffy to
come online.
- Torture-test updates.
- Documentation updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fix the following compilation error caused due to incomplete merge. This is
observed if CONFIG_EXTCON is not set.
In file included from ./include/linux/mfd/palmas.h:23:0,
from drivers/input/misc/palmas-pwrbutton.c:22:
./include/linux/extcon.h: In function ‘extcon_sync’:
./include/linux/extcon.h:361:1: error: expected declaration specifiers before ‘<<’ token
./include/linux/extcon.h:370:1: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘{’ token
./include/linux/extcon.h:376:1: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘>>’ token
./include/linux/extcon.h:381:1: error: expected declaration specifiers before ‘<<’ token
./include/linux/extcon.h:390:1: error: expected declaration specifiers or ‘...’ before ‘==’ token
./include/linux/extcon.h:476:11: warning: ‘struct extcon_specific_cable_nb’ declared inside parameter list [enabled by default]
./include/linux/extcon.h:476:11: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default]
./include/linux/extcon.h:474:19: error: storage class specified for parameter ‘extcon_register_interest’
./include/linux/extcon.h:474:19: warning: parameter ‘extcon_register_interest’ declared ‘inline’ [enabled by default]
./include/linux/extcon.h:477:1: warning: ‘always_inline’ attribute ignored [-Wattributes]
./include/linux/extcon.h:474:19: error: ‘no_instrument_function’ attribute applies only to functions
./include/linux/extcon.h:477:1: error: expected ‘;’, ‘,’ or ‘)’ before ‘{’ token
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Specify the format (size and endianess) for the vlan attributes.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the definitions for src/dst udp/tcp port masks and use
them when setting && dumping the relevant keys.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This action is intended to be an upgrade from a usability perspective
from pedit (as well as operational debugability).
Compare this:
sudo tc filter add dev $ETH parent 1: protocol ip prio 10 \
u32 match ip protocol 1 0xff flowid 1:2 \
action pedit munge offset -14 u8 set 0x02 \
munge offset -13 u8 set 0x15 \
munge offset -12 u8 set 0x15 \
munge offset -11 u8 set 0x15 \
munge offset -10 u16 set 0x1515 \
pipe
to:
sudo tc filter add dev $ETH parent 1: protocol ip prio 10 \
u32 match ip protocol 1 0xff flowid 1:2 \
action skbmod dmac 02:15:15:15:15:15
Also try to do a MAC address swap with pedit or worse
try to debug a policy with destination mac, source mac and
etherype. Then make few rules out of those and you'll get my point.
In the future common use cases on pedit can be migrated to this action
(as an example different fields in ip v4/6, transports like tcp/udp/sctp
etc). For this first cut, this allows modifying basic ethernet header.
The most important ethernet use case at the moment is when redirecting or
mirroring packets to a remote machine. The dst mac address needs a re-write
so that it doesnt get dropped or confuse an interconnecting (learning) switch
or dropped by a target machine (which looks at the dst mac). And at times
when flipping back the packet a swap of the MAC addresses is needed.
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can use ilog2() to more easily produce the desired NR_BG_LOCKS. This
works because ilog2() is evaluated at compile-time when its argument is
a compile-time constant.
I did not change the chosen NR_BG_LOCKS values.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
An obsolete comment and extra parentheses were left over from when the
sb_bgl_lock() macro was replaced with the bgl_lock_ptr() function.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
We'll want to be able to pass in flags, such as asking for explicit
fencing, and possibly other things down the road. Fortunately we
don't need a full 32b for the pipe-id. So use the upper 16 bits
for flags (which could be extended or reduced later if needed, so
start adding flags from the high bits).
Since anything with the upper bits set would not be a valid pipe-id,
an old userspace would not set any of the upper bits, and an old
kernel would reject it as an invalid pipe-id.
Signed-off-by: Rob Clark <robdclark@gmail.com>
- Validate fscrypt_context.format and fscrypt_context.flags. If
unrecognized values are set, then the kernel may not know how to
interpret the encrypted file, so it should fail the operation.
- Validate that AES_256_XTS is used for contents and that AES_256_CTS is
used for filenames. It was previously possible for the kernel to
accept these reversed, though it would have taken manual editing of
the block device. This was not intended.
- Fail cleanly rather than BUG()-ing if a file has an unexpected type.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since we have nice macro IRQ_RETVAL() we would use it to convert a flag of
handled interrupt from int to irqreturn_t.
The rationale of doing this is:
a) hence we implicitly mark hsu_dma_do_irq() as an auxiliary function that
can't be used as interrupt handler directly, and
b) to be in align with serial driver which is using serial8250_handle_irq()
that returns plain int by design.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
This patch provides a stub function for mvebu_mbus_get_io_win_info(),
which will be used for all non-Orion (ARM32 MVEBU) platforms for
compile test coverage.
On such platforms this function will return an error so that drivers
might detect a potential problem.
Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Marcin Wojtas <mw@semihalf.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Introduce a typedef gpio_blink_set_t to improve readability of the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
MLC and TLC NAND devices are using NAND cells exposing more than one bit,
but instead of attaching all the bits in a given cell to a single NAND
page, each bit is usually attached to a different page. This concept is
called 'page pairing', and has significant impacts on the flash storage
usage.
The main problem showed by these devices is that interrupting a page
program operation may not only corrupt the page we are programming
but also the page it is paired with, hence the need to expose to MTD
users the pairing scheme information.
The pairing APIs allows one to query pairing information attached to a
given page (here called wunit), or the other way around (the wunit
pointed by pairing information).
It also provides several helpers to help the conversion between absolute
offsets and wunits, and query the number of pairing groups.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Brian Norris <computersforpeace@gmail.com>
Based on consecutive msdu failures, mac80211 triggers CQM packet-loss
mechanism. Drivers like ath10k that have its own connection monitoring
algorithm, offloaded to firmware for triggering station kickout. In case
of station kickout, driver will report low ack status by mac80211 API
(ieee80211_report_low_ack).
This flag will enable the driver to completely rely on firmware events
for station kickout and bypass mac80211 packet loss mechanism.
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
No drivers implement this, relying either on the recursive
directory removal to remove their debugfs, or not having any
to start with. Remove the dead driver callback.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Unused now that NVMe sets up irq affinity before calling into blk-mq.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This allows drivers specify their own queue mapping by overriding the
setup-time function that builds the mq_map. This can be used for
example to build the map based on the MSI-X vector mapping provided
by the core interrupt layer for PCI devices.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
All drivers use the default, so provide an inline version of it. If we
ever need other queue mapping we can add an optional method back,
although supporting will also require major changes to the queue setup
code.
This provides better code generation, and better debugability as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The mapping is identical for all queues in a tag_set, so stop wasting
memory for building multiple. Note that for now I've kept the mq_map
pointer in the request_queue, but we'll need to investigate if we can
remove it without suffering too much from the additional pointer chasing.
The same would apply to the mq_ops pointer as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
These should go together with the rest of the T10 protection information
defintions.
[mkp: s/T10_DIF/T10_PI/]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add a new set of array reading functions that take a minimum and
maximum size limit and will fail if the property size is not within
the size limits. This makes it more convenient for drivers that
use variable-size DT arrays which must be bounded at both ends -
data must be at least N entries but must not overflow the array
it is being copied into. It is also more efficient than making this
functionality out of existing public functions and avoids duplication.
The existing array functions have been left in the API, since there
are a very large number of clients of those functions and their
existing functionality is still useful. This avoids turning a small
API improvement into a major kernel rework.
The old functions have been turned into mininmal static inlines calling
the new functions. The old functions had no upper limit on the actual
size of the dts entry, to preserve this functionality rather than keeping
two near-identical implementations, if the new function is called with
max=0 there is no limit on the size of the dts entry but only the min
number of elements are read.
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Most shared headers in include/linux don't need to know what the
internals of a struct module are; all they care about is that it
is a struct and hence they may require a pointer to one.
The advantage in this is that module.h is including a lot of stuff
itself, and an otherwise empty C file that just contains module.h
will result in ~750kB from CPP (compared to say 12kB from init.h)
So we have approximately 50 instances of "struct module;" in the
various include/linux headers already that help us keep module.h
out of other headers; here we do the same for gpio.
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Read DisplayPort branch device info from through debugfs
interface.
v2: use drm_dp_helper routines to collect data
v3: cleanup to match the drm_dp_helper.c patches introduced
earlier in this series
v4: move DP branch device info to function 'intel_dp_branch_device_info()'
v5: initial step to move debugging info from intel_dp. to drm_dp_helper.c (Daniel)
v6: read hw and sw revision without using specific drm_dp_helper routines
v7: indentation fixes (Jim Bride)
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Jim Bride <jim.bride@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473419458-17080-12-git-send-email-mika.kahola@intel.com
SW revision is mandatory field for DisplayPort branch
devices. This is defined in DPCD register fields 0x50A
and 0x50B.
v2: move drm_dp_ds_revision structure to be part of
drm_dp_link structure (Daniel)
v3: remove dependency to drm_dp_helper but instead parse
DPCD and print SW revision info to dmesg (Ville)
v4: commit message fix (Jim Bride)
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Jim Bride <jim.bride@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473419458-17080-9-git-send-email-mika.kahola@intel.com
HW revision is mandatory field for DisplayPort branch
devices. This is defined in DPCD register field 0x509.
v2: move drm_dp_ds_revision structure to be part of
drm_dp_link structure (Daniel)
v3: remove dependency to drm_dp_helper but instead parse
DPCD and print HW revision info to dmesg (Ville)
Reviewed-by: Jim Bride <jim.bride@linux.intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473419458-17080-8-git-send-email-mika.kahola@intel.com
Helper routine to read out maximum supported bits per
component for DisplayPort legay converters.
v2: Return early if detailed port cap info is not available.
Replace if-else ladder with switch-case (Ville)
Reviewed-by: Jim Bride <jim.bride@linux.intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473419458-17080-5-git-send-email-mika.kahola@intel.com
Helper routine to read out maximum supported pixel rate
for DisplayPort legay VGA converter or TMDS clock rate
for other digital legacy converters. The helper returns
clock rate in kHz.
v2: Return early if detailed port cap info is not available.
Replace if-else ladder with switch-case (Ville)
Reviewed-by: Jim Bride <jim.bride@linux.intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473419458-17080-4-git-send-email-mika.kahola@intel.com
Drop "VGA" from bits per component definitions as these
are also used by other standards such as DVI, HDMI,
DP++.
Reviewed-by: Jim Bride <jim.bride@linux.intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473419458-17080-3-git-send-email-mika.kahola@intel.com
