The main purpose of this tracepoint is to monitor bulk dequeue
in the network qdisc layer, as it cannot be deducted from the
existing qdisc stats.
The txq_state can be used for determining the reason for zero packet
dequeues, see enum netdev_queue_state_t.
Notice all packets doesn't necessary activate this tracepoint. As
qdiscs with flag TCQ_F_CAN_BYPASS, can directly invoke
sch_direct_xmit() when qdisc_qlen is zero.
Remember that perf record supports filters like:
perf record -e qdisc:qdisc_dequeue \
--filter 'ifindex == 4 && (packets > 1 || txq_state > 0)'
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
support for new dra762 SoC. The other changes are are for legacy
DMA code removal, and MMC quirk and iodelay config for dra7.
-----BEGIN PGP SIGNATURE-----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=FBGl
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.14/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
Pull "soc changes for omaps for v4.14" from Tony Lindgren:
SoC updates for omaps for v4.14. Most of the chages are to add
support for new dra762 SoC. The other changes are are for legacy
DMA code removal, and MMC quirk and iodelay config for dra7.
* tag 'omap-for-v4.14/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP: dra7: powerdomain data: Register SoC specific powerdomains
ARM: dra762: Enable SMP for dra762
ARM: dra7: hwmod: Register dra76x specific hwmod
ARM: dra762: Add support for device identification
ARM: OMAP2+: board-generic: add support for dra762 family
ARM: OMAP2+: Select PINCTRL_TI_IODELAY for SOC_DRA7XX
ARM: OMAP2+: Add pdata-quirks for MMC/SD on DRA74x EVM
ARM: OMAP2+: Remove unused legacy code for DMA
Add R-Car D3 (r8a77995) support to the Renesas-specific SoC drivers
- SoC identification
- System controller
- Reset controller
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=AO//
-----END PGP SIGNATURE-----
Merge tag 'renesas-drivers-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers
Pull "Renesas ARM Based SoC Drivers Updates for v4.14" from Simon Horman:
Add R-Car D3 (r8a77995) support to the Renesas-specific SoC drivers
- SoC identification
- System controller
- Reset controller
* tag 'renesas-drivers-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
soc: renesas: rcar-rst: Add support for R-Car D3
soc: renesas: rcar-sysc: Add support for R-Car D3 power areas
soc: renesas: Add r8a77995 SYSC PM Domain Binding Definitions
soc: renesas: Identify R-Car D3
jtag/sdmmc switching for rk3328.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlmEP/AQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgf/lCACcJnVGr9PB9ibmTo7LASmljN+OP2G+9o3i
sOlxlkh5eM5sh9Tbg0NPVBziPmTYhBoPrFQjGEvt01m62gAOf7wugPRStKAivL7h
/pAUhkL1f4yIR0AnplLgy4+9wNJ7zK5DCj4dDCwd0+vX+aZbgDACPLdqn0afwuu2
g8pA3C5fRvThVjNpXzwHQSicUOmsvHPWpOWzx1YiKnXxXGKO0Xev+jDseWGqTMXR
8BXtb62G0QMHGgnrEu2TFex+SzdTumv9r4NpxP3+uytSQogbWUwCUAWpLxxxvgEJ
dAX9VcTaaJU3CMUwKot1mqmec0wElbwogx961An9bi4EoE+ru4Lt
=YgWd
-----END PGP SIGNATURE-----
Merge tag 'v4.14-rockchip-drivers-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/drivers
Pull "Rockchip driver changes for 4.14" from Heiko Stübner:
Powerdomain support for rk3366 and disabling of the automatic
jtag/sdmmc switching for rk3328.
* tag 'v4.14-rockchip-drivers-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
soc: rockchip: power-domain: add power domain support for rk3366
dt-bindings: add binding for rk3366 power domains
dt-bindings: power: add RK3366 SoCs header for power-domain
soc: rockchip: disable jtag switching for RK3328 Soc
-----BEGIN PGP SIGNATURE-----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=rEq4
-----END PGP SIGNATURE-----
Merge tag 'tee-drv-for-4.14' of http://git.linaro.org/people/jens.wiklander/linux-tee into next/drivers
Pull "Small fixes and enhancements for the TEE subsystem" from Jens Wiklander:
* tag 'tee-drv-for-4.14' of http://git.linaro.org/people/jens.wiklander/linux-tee:
tee: optee: sync with new naming of interrupts
tee: indicate privileged dev in gen_caps
tee: optee: interruptible RPC sleep
tee: optee: add const to tee_driver_ops and tee_desc structures
tee: tee_shm: Constify dma_buf_ops structures.
tee: add forward declaration for struct device
tee: optee: fix uninitialized symbol 'parg'
This library provides helpers for drivers that don't subclass
drm_framebuffer and are backed by drm_gem_object. The code is
taken from drm_fb_cma_helper.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1502631125-13557-2-git-send-email-noralf@tronnes.org
Instead add a mechanism to ensure that the request doesn't disappear
from underneath us while copying from the socket. We do this by
preventing xprt_release() from freeing the XDR buffers until the
flag RPC_TASK_MSG_RECV has been cleared from the request.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Recently we added a new map type called dev map used to forward XDP
packets between ports (6093ec2dc3). This patches introduces a
similar notion for sockets.
A sockmap allows users to add participating sockets to a map. When
sockets are added to the map enough context is stored with the
map entry to use the entry with a new helper
bpf_sk_redirect_map(map, key, flags)
This helper (analogous to bpf_redirect_map in XDP) is given the map
and an entry in the map. When called from a sockmap program, discussed
below, the skb will be sent on the socket using skb_send_sock().
With the above we need a bpf program to call the helper from that will
then implement the send logic. The initial site implemented in this
series is the recv_sock hook. For this to work we implemented a map
attach command to add attributes to a map. In sockmap we add two
programs a parse program and a verdict program. The parse program
uses strparser to build messages and pass them to the verdict program.
The parse programs use the normal strparser semantics. The verdict
program is of type SK_SKB.
The verdict program returns a verdict SK_DROP, or SK_REDIRECT for
now. Additional actions may be added later. When SK_REDIRECT is
returned, expected when bpf program uses bpf_sk_redirect_map(), the
sockmap logic will consult per cpu variables set by the helper routine
and pull the sock entry out of the sock map. This pattern follows the
existing redirect logic in cls and xdp programs.
This gives the flow,
recv_sock -> str_parser (parse_prog) -> verdict_prog -> skb_send_sock
\
-> kfree_skb
As an example use case a message based load balancer may use specific
logic in the verdict program to select the sock to send on.
Sample programs are provided in future patches that hopefully illustrate
the user interfaces. Also selftests are in follow-on patches.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
bpf_prog_inc_not_zero will be used by upcoming sockmap patches this
patch simply exports it so we can pull it in.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A class of programs, run from strparser and soon from a new map type
called sock map, are used with skb as the context but on established
sockets. By creating a specific program type for these we can use
bpf helpers that expect full sockets and get the verifier to ensure
these helpers are not used out of context.
The new type is BPF_PROG_TYPE_SK_SKB. This patch introduces the
infrastructure and type.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Legacy PCI INTx interrupts are represented in the PCI_INTERRUPT_PIN
register using the range 1-4, which matches our enum pci_interrupt_pin.
This is however not ideal for an IRQ domain, where with 4 interrupts we
would ideally have a domain of size 4 & hwirq numbers in the range 0-3.
Different PCI host controller drivers have handled this in different ways.
Of those under drivers/pci/ which register an INTx IRQ domain, we have:
- pcie-altera uses the range 1-4 in device trees and an IRQ domain of
size 5 to cover that range, with entry 0 wasted.
- pcie-xilinx & pcie-xilinx-nwl use the range 1-4 in device trees but
register an IRQ domain of size 4, which doesn't cover the hwirq=4/INTD
case leading to that interrupt being broken.
- pci-ftpci100 & pci-aardvark use the range 0-3 in both device trees & as
hwirq numbering in the driver & IRQ domain.
In order to introduce some level of consistency in at least the hwirq
numbering used by the drivers & IRQ domains, this patch introduces a new
pci_irqd_intx_xlate() helper function which drivers using the 1-4 range in
device trees can assign as the xlate callback for their INTx IRQ domain.
This translates the 1-4 range into a 0-3 range, allowing us to use an IRQ
domain of size 4 & avoid a wasted entry. Further patches will make use of
this in drivers to allow them to use an IRQ domain of size 4 for legacy
INTx interrupts without breaking INTD.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
This patch handles the following issues that were observed when we are
handling racing channel offer message and rescind message for the same
offer:
1. Since the host does not respond to messages on a rescinded channel,
in the current code, we could be indefinitely blocked on the vmbus_open() call.
2. When a rescinded channel is being closed, if there is a pending interrupt on the
channel, we could end up freeing the channel that the interrupt handler would run on.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Tested-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a resource managed version of irq_sim_init(). This can be
conveniently used in device drivers.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Cc: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Link: http://lkml.kernel.org/r/20170814145318.6495-3-brgl@bgdev.pl
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Implement a simple, irq_work-based framework for simulating
interrupts. Currently the API exposes routines for initializing and
deinitializing the simulator object, enqueueing the interrupts and
retrieving the allocated interrupt numbers based on the offset of the
dummy interrupt in the simulator struct.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Cc: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Link: http://lkml.kernel.org/r/20170814145318.6495-2-brgl@bgdev.pl
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
All callers of flush_space pass the same number for orig/num_bytes
arguments. Let's remove one of the numbers and also modify the trace
point to show only a single number - bytes requested.
Seems that last point where the two parameters were treated differently
is before the ticketed enospc rework.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch adds a tracepoint event for prelim_ref insertion and
merging. For each, the ref being inserted or merged and the count
of tree nodes is issued.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The omapdrm platform data are not used anymore, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tracepoint arguments are all read-only. If we mark the arguments
as const, we're able to keep or convert those arguments to const
where appropriate.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The HDMI audio driver only needs to know which generation of HDMI
transmitter it deals with, not the detailed SoC model. Pass the version
number as an integer to prepare for removal of the OMAP SoC version from
the omapdrm driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Add all R-Car D3 Clock Pulse Generator Core Clock Outputs, as listed
in Table 8.2f ("List of Clocks [R-Car D3]") of the R-Car Series, 3rd
Generation Hardware User's Manual (Rev. 0.55, Jun. 30, 2017).
Note that internal CPG clocks (S0, S1, S2, S3, S1C, S3C, SDSRC, and
SSPSRC) are not included, as they are used as internal clock sources
only, and never referenced from DT.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
v2:
* Renamed ALLOC_MEMORY_OF_SCRATCH to SET_SCRATCH_BACKING_VA
* Removed size parameter from the ioctl, it was unused
* Removed hole in ioctl number space
* No more call to write_config_static_mem
* Return correct error code from ioctl
Signed-off-by: Moses Reuben <moses.reuben@amd.com>
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Pull networking fixes from David Miller:
1) Fix TCP checksum offload handling in iwlwifi driver, from Emmanuel
Grumbach.
2) In ksz DSA tagging code, free SKB if skb_put_padto() fails. From
Vivien Didelot.
3) Fix two regressions with bonding on wireless, from Andreas Born.
4) Fix build when busypoll is disabled, from Daniel Borkmann.
5) Fix copy_linear_skb() wrt. SO_PEEK_OFF, from Eric Dumazet.
6) Set SKB cached route properly in inet_rtm_getroute(), from Florian
Westphal.
7) Fix PCI-E relaxed ordering handling in cxgb4 driver, from Ding
Tianhong.
8) Fix module refcnt leak in ULP code, from Sabrina Dubroca.
9) Fix use of GFP_KERNEL in atomic contexts in AF_KEY code, from Eric
Dumazet.
10) Need to purge socket write queue in dccp_destroy_sock(), also from
Eric Dumazet.
11) Make bpf_trace_printk() work properly on 32-bit architectures, from
Daniel Borkmann.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (47 commits)
bpf: fix bpf_trace_printk on 32 bit archs
PCI: fix oops when try to find Root Port for a PCI device
sfc: don't try and read ef10 data on non-ef10 NIC
net_sched: remove warning from qdisc_hash_add
net_sched/sfq: update hierarchical backlog when drop packet
net_sched: reset pointers to tcf blocks in classful qdiscs' destructors
ipv4: fix NULL dereference in free_fib_info_rcu()
net: Fix a typo in comment about sock flags.
ipv6: fix NULL dereference in ip6_route_dev_notify()
tcp: fix possible deadlock in TCP stack vs BPF filter
dccp: purge write queue in dccp_destroy_sock()
udp: fix linear skb reception with PEEK_OFF
ipv6: release rt6->rt6i_idev properly during ifdown
af_key: do not use GFP_KERNEL in atomic contexts
tcp: ulp: avoid module refcnt leak in tcp_set_ulp
net/cxgb4vf: Use new PCI_DEV_FLAGS_NO_RELAXED_ORDERING flag
net/cxgb4: Use new PCI_DEV_FLAGS_NO_RELAXED_ORDERING flag
PCI: Disable Relaxed Ordering Attributes for AMD A1100
PCI: Disable Relaxed Ordering for some Intel processors
PCI: Disable PCIe Relaxed Ordering if unsupported
...
The extcon header file defines the functions which used the mismatched
indentation and used the space on some case. So, this patch clean-up
the indentation in order to improve the readbility.
And this patch changes the return value of extcon_get_extcon_dev()
because of maintaing the same value with extcon_get_edev_by_phandle().
Signed-off-by: Chanwoo Choi <cwchoi00@gmail.com>
The extcon files explains the detailed operation for functions and
what is meaning of extcon structure. There are different explanation
even if the same argument.
So, it modifies the description for both functions and structures
in order to improve the readability and guide the role of functions
more well.
Also, this patch fixes the mismatching license info as a GPL v2
and removes the inactive author information.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The commit 575c2b867e ("extcon: Rename the extcon_set/get_state()
to maintain the function naming pattern") renames the extcon function as
following: But, the extcon just keeps the old API to prevent the build error.
This patch removes the deprecatd extcon API.
- extcon_get_cable_state_() -> extcon_get_state()
- extcon_set_cable_state_() -> extcon_set_state_sync()
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
IPv6 routes currently lack nexthop flags as in IPv4. This has several
implications.
In the forwarding path, it requires us to check the carrier state of the
nexthop device and potentially ignore a linkdown route, instead of
checking for RTNH_F_LINKDOWN.
It also requires capable drivers to use the user facing IPv6-specific
route flags to provide offload indication, instead of using the nexthop
flags as in IPv4.
Add nexthop flags to IPv6 routes in the 40 bytes hole and use it to
provide offload indication instead of the RTF_OFFLOAD flag, which is
removed while it's still not part of any official kernel release.
In the near future we would like to use the field for the
RTNH_F_{LINKDOWN,DEAD} flags, but this change is more involved and might
not be ready in time for the current cycle.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
State of a register doesn't matter if it wasn't read in reaching an exit;
a write screens off all reads downstream of it from all explored_states
upstream of it.
This allows us to prune many more branches; here are some processed insn
counts for some Cilium programs:
Program before after
bpf_lb_opt_-DLB_L3.o 6515 3361
bpf_lb_opt_-DLB_L4.o 8976 5176
bpf_lb_opt_-DUNKNOWN.o 2960 1137
bpf_lxc_opt_-DDROP_ALL.o 95412 48537
bpf_lxc_opt_-DUNKNOWN.o 141706 78718
bpf_netdev.o 24251 17995
bpf_overlay.o 10999 9385
The runtime is also improved; here are 'time' results in ms:
Program before after
bpf_lb_opt_-DLB_L3.o 24 6
bpf_lb_opt_-DLB_L4.o 26 11
bpf_lb_opt_-DUNKNOWN.o 11 2
bpf_lxc_opt_-DDROP_ALL.o 1288 139
bpf_lxc_opt_-DUNKNOWN.o 1768 234
bpf_netdev.o 62 31
bpf_overlay.o 15 13
Signed-off-by: Edward Cree <ecree@solarflare.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
We currently have a definition of enum pci_interrupt_pin in a header
specific to PCI endpoints - linux/pci-epf.h. In order to allow for use of
this enum from PCI host code in a future commit, move its definition to
linux/pci.h & include that from linux/pci-epf.h.
Additionally we add a PCI_NUM_INTX macro which indicates the number of PCI
INTx interrupts, and will be used alongside enum pci_interrupt_pin in
further patches.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
[bhelgaas: move enum pci_interrupt_pin outside #ifdef CONFIG_PCI]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
While comparing signed and unsigned variables, compiler will converts the
signed value to unsigned one, due to this reason, {in,de}crease_sleep_time
may return overflowed result.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In some cases, an architecture might wish its stacks to be aligned to a
boundary larger than THREAD_SIZE. For example, using an alignment of
double THREAD_SIZE can allow for stack overflows smaller than
THREAD_SIZE to be detected by checking a single bit of the stack
pointer.
This patch allows architectures to override the alignment of VMAP'd
stacks, by defining THREAD_ALIGN. Where not defined, this defaults to
THREAD_SIZE, as is the case today.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: linux-kernel@vger.kernel.org
This time quite a few fixes for iwlwifi and one major regression fix
for brcmfmac. For the iwlwifi aggregation bug a small change was
needed for mac80211, but as Johannes is still away the mac80211 patch
is taken via wireless-drivers tree.
brcmfmac
* fix firmware crash (a recent regression in bcm4343{0,1,8}
iwlwifi
* Some simple PCI HW ID fix-ups and additions for family 9000
* Remove a bogus warning message with new FWs (bug #196915)
* Don't allow illegal channel options to be used (bug #195299)
* A fix for checksum offload in family 9000
* A fix serious throughput degradation in 11ac with multiple streams
* An old bug in SMPS where the firmware was not aware of SMPS changes
* Fix a memory leak in the SAR code
* Fix a stuck queue case in AP mode;
* Convert a WARN to a simple debug in a legitimate race case (from
which we can recover)
* Fix a severe throughput aggregation on 9000-family devices due to
aggregation issues, needed a small change in mac80211
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZkte/AAoJEG4XJFUm622bjqUH/01JNHIGh7WI2YHm9qA//uC0
L35j/nYwiBX47LREkVhgS2goR3BYihricM1w1uwv/1E/JJqECWVe7rPodoM4sYqh
jVVPy3ZYIK/Kk8i7v2W+VIeqR0b2q4PBt+UtruEBH1o8ESKZPDMqudq+AAbHeiih
tWJpPmS+IFW8yWaF9+v5DhWx5q4/JNvZgmNarS5/aPF+2bTR9Gw0bf8PUdyLip6J
rsv0W9e9SqmVBYkRoC4WMgM/RJbUh1d66SPQ3Yrv/nFL6cTgecC2IxQx7pCGUq9n
LbDJy6HCi+3mBJyMkVVs9iaXZiaNm7eUmEq16ENpiAnsQy5h9i/jVpySC0R/BzQ=
=KXB+
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-for-davem-2017-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 4.13
This time quite a few fixes for iwlwifi and one major regression fix
for brcmfmac. For the iwlwifi aggregation bug a small change was
needed for mac80211, but as Johannes is still away the mac80211 patch
is taken via wireless-drivers tree.
brcmfmac
* fix firmware crash (a recent regression in bcm4343{0,1,8}
iwlwifi
* Some simple PCI HW ID fix-ups and additions for family 9000
* Remove a bogus warning message with new FWs (bug #196915)
* Don't allow illegal channel options to be used (bug #195299)
* A fix for checksum offload in family 9000
* A fix serious throughput degradation in 11ac with multiple streams
* An old bug in SMPS where the firmware was not aware of SMPS changes
* Fix a memory leak in the SAR code
* Fix a stuck queue case in AP mode;
* Convert a WARN to a simple debug in a legitimate race case (from
which we can recover)
* Fix a severe throughput aggregation on 9000-family devices due to
aggregation issues, needed a small change in mac80211
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a timer to flush entries from the Flush-Queues every
10ms. This makes sure that no stale TLB entries remain for
too long after an IOVA has been unmapped.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The lock is taken from the same CPU most of the time. But
having it allows to flush the queue also from another CPU if
necessary.
This will be used by a timer to regularily flush any pending
IOVAs from the Flush-Queues.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
There are two counters:
* fq_flush_start_cnt - Increased when a TLB flush
is started.
* fq_flush_finish_cnt - Increased when a TLB flush
is finished.
The fq_flush_start_cnt is assigned to every Flush-Queue
entry on its creation. When freeing entries from the
Flush-Queue, the value in the entry is compared to the
fq_flush_finish_cnt. The entry can only be freed when its
value is less than the value of fq_flush_finish_cnt.
The reason for these counters it to take advantage of IOMMU
TLB flushes that happened on other CPUs. These already
flushed the TLB for Flush-Queue entries on other CPUs so
that they can already be freed without flushing the TLB
again.
This makes it less likely that the Flush-Queue is full and
saves IOMMU TLB flushes.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add a function to add entries to the Flush-Queue ring
buffer. If the buffer is full, call the flush-callback and
free the entries.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This patch adds the basic data-structures to implement
flush-queues in the generic IOVA code. It also adds the
initialization and destroy routines for these data
structures.
The initialization routine is designed so that the use of
this feature is optional for the users of IOVA code.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This new call-back will be used to check if the domain attach need be
deferred for now. If yes, the domain attach/detach will return directly.
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add zstd compression and decompression support to BtrFS. zstd at its
fastest level compresses almost as well as zlib, while offering much
faster compression and decompression, approaching lzo speeds.
I benchmarked btrfs with zstd compression against no compression, lzo
compression, and zlib compression. I benchmarked two scenarios. Copying
a set of files to btrfs, and then reading the files. Copying a tarball
to btrfs, extracting it to btrfs, and then reading the extracted files.
After every operation, I call `sync` and include the sync time.
Between every pair of operations I unmount and remount the filesystem
to avoid caching. The benchmark files can be found in the upstream
zstd source repository under
`contrib/linux-kernel/{btrfs-benchmark.sh,btrfs-extract-benchmark.sh}`
[1] [2].
I ran the benchmarks on a Ubuntu 14.04 VM with 2 cores and 4 GiB of RAM.
The VM is running on a MacBook Pro with a 3.1 GHz Intel Core i7 processor,
16 GB of RAM, and a SSD.
The first compression benchmark is copying 10 copies of the unzipped
Silesia corpus [3] into a BtrFS filesystem mounted with
`-o compress-force=Method`. The decompression benchmark times how long
it takes to `tar` all 10 copies into `/dev/null`. The compression ratio is
measured by comparing the output of `df` and `du`. See the benchmark file
[1] for details. I benchmarked multiple zstd compression levels, although
the patch uses zstd level 1.
| Method | Ratio | Compression MB/s | Decompression speed |
|---------|-------|------------------|---------------------|
| None | 0.99 | 504 | 686 |
| lzo | 1.66 | 398 | 442 |
| zlib | 2.58 | 65 | 241 |
| zstd 1 | 2.57 | 260 | 383 |
| zstd 3 | 2.71 | 174 | 408 |
| zstd 6 | 2.87 | 70 | 398 |
| zstd 9 | 2.92 | 43 | 406 |
| zstd 12 | 2.93 | 21 | 408 |
| zstd 15 | 3.01 | 11 | 354 |
The next benchmark first copies `linux-4.11.6.tar` [4] to btrfs. Then it
measures the compression ratio, extracts the tar, and deletes the tar.
Then it measures the compression ratio again, and `tar`s the extracted
files into `/dev/null`. See the benchmark file [2] for details.
| Method | Tar Ratio | Extract Ratio | Copy (s) | Extract (s)| Read (s) |
|--------|-----------|---------------|----------|------------|----------|
| None | 0.97 | 0.78 | 0.981 | 5.501 | 8.807 |
| lzo | 2.06 | 1.38 | 1.631 | 8.458 | 8.585 |
| zlib | 3.40 | 1.86 | 7.750 | 21.544 | 11.744 |
| zstd 1 | 3.57 | 1.85 | 2.579 | 11.479 | 9.389 |
[1] https://github.com/facebook/zstd/blob/dev/contrib/linux-kernel/btrfs-benchmark.sh
[2] https://github.com/facebook/zstd/blob/dev/contrib/linux-kernel/btrfs-extract-benchmark.sh
[3] http://sun.aei.polsl.pl/~sdeor/index.php?page=silesia
[4] https://cdn.kernel.org/pub/linux/kernel/v4.x/linux-4.11.6.tar.xz
zstd source repository: https://github.com/facebook/zstd
Signed-off-by: Nick Terrell <terrelln@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Add zstd compression and decompression kernel modules.
zstd offers a wide varity of compression speed and quality trade-offs.
It can compress at speeds approaching lz4, and quality approaching lzma.
zstd decompressions at speeds more than twice as fast as zlib, and
decompression speed remains roughly the same across all compression levels.
The code was ported from the upstream zstd source repository. The
`linux/zstd.h` header was modified to match linux kernel style.
The cross-platform and allocation code was stripped out. Instead zstd
requires the caller to pass a preallocated workspace. The source files
were clang-formatted [1] to match the Linux Kernel style as much as
possible. Otherwise, the code was unmodified. We would like to avoid
as much further manual modification to the source code as possible, so it
will be easier to keep the kernel zstd up to date.
I benchmarked zstd compression as a special character device. I ran zstd
and zlib compression at several levels, as well as performing no
compression, which measure the time spent copying the data to kernel space.
Data is passed to the compresser 4096 B at a time. The benchmark file is
located in the upstream zstd source repository under
`contrib/linux-kernel/zstd_compress_test.c` [2].
I ran the benchmarks on a Ubuntu 14.04 VM with 2 cores and 4 GiB of RAM.
The VM is running on a MacBook Pro with a 3.1 GHz Intel Core i7 processor,
16 GB of RAM, and a SSD. I benchmarked using `silesia.tar` [3], which is
211,988,480 B large. Run the following commands for the benchmark:
sudo modprobe zstd_compress_test
sudo mknod zstd_compress_test c 245 0
sudo cp silesia.tar zstd_compress_test
The time is reported by the time of the userland `cp`.
The MB/s is computed with
1,536,217,008 B / time(buffer size, hash)
which includes the time to copy from userland.
The Adjusted MB/s is computed with
1,536,217,088 B / (time(buffer size, hash) - time(buffer size, none)).
The memory reported is the amount of memory the compressor requests.
| Method | Size (B) | Time (s) | Ratio | MB/s | Adj MB/s | Mem (MB) |
|----------|----------|----------|-------|---------|----------|----------|
| none | 11988480 | 0.100 | 1 | 2119.88 | - | - |
| zstd -1 | 73645762 | 1.044 | 2.878 | 203.05 | 224.56 | 1.23 |
| zstd -3 | 66988878 | 1.761 | 3.165 | 120.38 | 127.63 | 2.47 |
| zstd -5 | 65001259 | 2.563 | 3.261 | 82.71 | 86.07 | 2.86 |
| zstd -10 | 60165346 | 13.242 | 3.523 | 16.01 | 16.13 | 13.22 |
| zstd -15 | 58009756 | 47.601 | 3.654 | 4.45 | 4.46 | 21.61 |
| zstd -19 | 54014593 | 102.835 | 3.925 | 2.06 | 2.06 | 60.15 |
| zlib -1 | 77260026 | 2.895 | 2.744 | 73.23 | 75.85 | 0.27 |
| zlib -3 | 72972206 | 4.116 | 2.905 | 51.50 | 52.79 | 0.27 |
| zlib -6 | 68190360 | 9.633 | 3.109 | 22.01 | 22.24 | 0.27 |
| zlib -9 | 67613382 | 22.554 | 3.135 | 9.40 | 9.44 | 0.27 |
I benchmarked zstd decompression using the same method on the same machine.
The benchmark file is located in the upstream zstd repo under
`contrib/linux-kernel/zstd_decompress_test.c` [4]. The memory reported is
the amount of memory required to decompress data compressed with the given
compression level. If you know the maximum size of your input, you can
reduce the memory usage of decompression irrespective of the compression
level.
| Method | Time (s) | MB/s | Adjusted MB/s | Memory (MB) |
|----------|----------|---------|---------------|-------------|
| none | 0.025 | 8479.54 | - | - |
| zstd -1 | 0.358 | 592.15 | 636.60 | 0.84 |
| zstd -3 | 0.396 | 535.32 | 571.40 | 1.46 |
| zstd -5 | 0.396 | 535.32 | 571.40 | 1.46 |
| zstd -10 | 0.374 | 566.81 | 607.42 | 2.51 |
| zstd -15 | 0.379 | 559.34 | 598.84 | 4.61 |
| zstd -19 | 0.412 | 514.54 | 547.77 | 8.80 |
| zlib -1 | 0.940 | 225.52 | 231.68 | 0.04 |
| zlib -3 | 0.883 | 240.08 | 247.07 | 0.04 |
| zlib -6 | 0.844 | 251.17 | 258.84 | 0.04 |
| zlib -9 | 0.837 | 253.27 | 287.64 | 0.04 |
Tested in userland using the test-suite in the zstd repo under
`contrib/linux-kernel/test/UserlandTest.cpp` [5] by mocking the kernel
functions. Fuzz tested using libfuzzer [6] with the fuzz harnesses under
`contrib/linux-kernel/test/{RoundTripCrash.c,DecompressCrash.c}` [7] [8]
with ASAN, UBSAN, and MSAN. Additionaly, it was tested while testing the
BtrFS and SquashFS patches coming next.
[1] https://clang.llvm.org/docs/ClangFormat.html
[2] https://github.com/facebook/zstd/blob/dev/contrib/linux-kernel/zstd_compress_test.c
[3] http://sun.aei.polsl.pl/~sdeor/index.php?page=silesia
[4] https://github.com/facebook/zstd/blob/dev/contrib/linux-kernel/zstd_decompress_test.c
[5] https://github.com/facebook/zstd/blob/dev/contrib/linux-kernel/test/UserlandTest.cpp
[6] http://llvm.org/docs/LibFuzzer.html
[7] https://github.com/facebook/zstd/blob/dev/contrib/linux-kernel/test/RoundTripCrash.c
[8] https://github.com/facebook/zstd/blob/dev/contrib/linux-kernel/test/DecompressCrash.c
zstd source repository: https://github.com/facebook/zstd
Signed-off-by: Nick Terrell <terrelln@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Adds xxhash kernel module with xxh32 and xxh64 hashes. xxhash is an
extremely fast non-cryptographic hash algorithm for checksumming.
The zstd compression and decompression modules added in the next patch
require xxhash. I extracted it out from zstd since it is useful on its
own. I copied the code from the upstream XXHash source repository and
translated it into kernel style. I ran benchmarks and tests in the kernel
and tests in userland.
I benchmarked xxhash as a special character device. I ran in four modes,
no-op, xxh32, xxh64, and crc32. The no-op mode simply copies the data to
kernel space and ignores it. The xxh32, xxh64, and crc32 modes compute
hashes on the copied data. I also ran it with four different buffer sizes.
The benchmark file is located in the upstream zstd source repository under
`contrib/linux-kernel/xxhash_test.c` [1].
I ran the benchmarks on a Ubuntu 14.04 VM with 2 cores and 4 GiB of RAM.
The VM is running on a MacBook Pro with a 3.1 GHz Intel Core i7 processor,
16 GB of RAM, and a SSD. I benchmarked using the file `filesystem.squashfs`
from `ubuntu-16.10-desktop-amd64.iso`, which is 1,536,217,088 B large.
Run the following commands for the benchmark:
modprobe xxhash_test
mknod xxhash_test c 245 0
time cp filesystem.squashfs xxhash_test
The time is reported by the time of the userland `cp`.
The GB/s is computed with
1,536,217,008 B / time(buffer size, hash)
which includes the time to copy from userland.
The Normalized GB/s is computed with
1,536,217,088 B / (time(buffer size, hash) - time(buffer size, none)).
| Buffer Size (B) | Hash | Time (s) | GB/s | Adjusted GB/s |
|-----------------|-------|----------|------|---------------|
| 1024 | none | 0.408 | 3.77 | - |
| 1024 | xxh32 | 0.649 | 2.37 | 6.37 |
| 1024 | xxh64 | 0.542 | 2.83 | 11.46 |
| 1024 | crc32 | 1.290 | 1.19 | 1.74 |
| 4096 | none | 0.380 | 4.04 | - |
| 4096 | xxh32 | 0.645 | 2.38 | 5.79 |
| 4096 | xxh64 | 0.500 | 3.07 | 12.80 |
| 4096 | crc32 | 1.168 | 1.32 | 1.95 |
| 8192 | none | 0.351 | 4.38 | - |
| 8192 | xxh32 | 0.614 | 2.50 | 5.84 |
| 8192 | xxh64 | 0.464 | 3.31 | 13.60 |
| 8192 | crc32 | 1.163 | 1.32 | 1.89 |
| 16384 | none | 0.346 | 4.43 | - |
| 16384 | xxh32 | 0.590 | 2.60 | 6.30 |
| 16384 | xxh64 | 0.466 | 3.30 | 12.80 |
| 16384 | crc32 | 1.183 | 1.30 | 1.84 |
Tested in userland using the test-suite in the zstd repo under
`contrib/linux-kernel/test/XXHashUserlandTest.cpp` [2] by mocking the
kernel functions. A line in each branch of every function in `xxhash.c`
was commented out to ensure that the test-suite fails. Additionally
tested while testing zstd and with SMHasher [3].
[1] https://phabricator.intern.facebook.com/P57526246
[2] https://github.com/facebook/zstd/blob/dev/contrib/linux-kernel/test/XXHashUserlandTest.cpp
[3] https://github.com/aappleby/smhasher
zstd source repository: https://github.com/facebook/zstd
XXHash source repository: https://github.com/cyan4973/xxhash
Signed-off-by: Nick Terrell <terrelln@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
