Pull irq updates from Thomas Gleixner:
"A small set of updates mostly for irq chip drivers:
- MIPS GIC fix for spurious, masked interrupts
- fix for a subtle IPI bug in GICv3
- do not probe GICv3 ITSs that are marked as disabled
- multi-MSI support for GICv2m
- various small cleanups"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqdomain: Re-use DEFINE_SHOW_ATTRIBUTE() macro
irqchip/bcm: Remove hashed address printing
irqchip/gic-v2m: Add PCI Multi-MSI support
irqchip/gic-v3: Ignore disabled ITS nodes
irqchip/gic-v3: Use wmb() instead of smb_wmb() in gic_raise_softirq()
irqchip/gic-v3: Change pr_debug message to pr_devel
irqchip/mips-gic: Avoid spuriously handling masked interrupts
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=n5RP
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20180217' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request from Keith, with fixes all over the map for nvme.
From various folks.
- Classic polling fix, that avoids a latency issue where we still end
up waiting for an interrupt in some cases. From Nitesh Shetty.
- Comment typo fix from Minwoo Im.
* tag 'for-linus-20180217' of git://git.kernel.dk/linux-block:
block: fix a typo in comment of BLK_MQ_POLL_STATS_BKTS
nvme-rdma: fix sysfs invoked reset_ctrl error flow
nvmet: Change return code of discard command if not supported
nvme-pci: Fix timeouts in connecting state
nvme-pci: Remap CMB SQ entries on every controller reset
nvme: fix the deadlock in nvme_update_formats
blk: optimization for classic polling
nvme: Don't use a stack buffer for keep-alive command
nvme_fc: cleanup io completion
nvme_fc: correct abort race condition on resets
nvme: Fix discard buffer overrun
nvme: delete NVME_CTRL_LIVE --> NVME_CTRL_CONNECTING transition
nvme-rdma: use NVME_CTRL_CONNECTING state to mark init process
nvme: rename NVME_CTRL_RECONNECTING state to NVME_CTRL_CONNECTING
- meson-gx: Revert to earlier tuning process
- bcm2835: Don't overwrite max frequency unconditionally
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=+wYZ
-----END PGP SIGNATURE-----
Merge tag 'mmc-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- meson-gx: Revert to earlier tuning process
- bcm2835: Don't overwrite max frequency unconditionally
* tag 'mmc-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: bcm2835: Don't overwrite max frequency unconditionally
Revert "mmc: meson-gx: include tx phase in the tuning process"
* Use the appropriate OOB layout in the VF610 driver
-----BEGIN PGP SIGNATURE-----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=MaSC
-----END PGP SIGNATURE-----
Merge tag 'mtd/fixes-for-4.16-rc2' of git://git.infradead.org/linux-mtd
Pull mtd fixes from Boris Brezillon:
- add missing dependency to NAND_MARVELL Kconfig entry
- use the appropriate OOB layout in the VF610 driver
* tag 'mtd/fixes-for-4.16-rc2' of git://git.infradead.org/linux-mtd:
mtd: nand: MTD_NAND_MARVELL should depend on HAS_DMA
mtd: nand: vf610: set correct ooblayout
Passive sockets can have ongoing operations on them, specifically, we
have two wait_event_interruptable calls in pvcalls_front_accept.
Add two wake_up calls in pvcalls_front_release, then wait for the
potential waiters to return and release the sock_mapping refcount.
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Acked-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Introduce a per sock_mapping refcount, in addition to the existing
global refcount. Thanks to the sock_mapping refcount, we can safely wait
for it to be 1 in pvcalls_front_release before freeing an active socket,
instead of waiting for the global refcount to be 1.
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Acked-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Commit fd8aa9095a ("xen: optimize xenbus driver for multiple concurrent
xenstore accesses") optimized xenbus concurrent accesses but in doing so
broke UABI of /dev/xen/xenbus. Through /dev/xen/xenbus applications are in
charge of xenbus message exchange with the correct header and body. Now,
after the mentioned commit the replies received by application will no
longer have the header req_id echoed back as it was on request (see
specification below for reference), because that particular field is being
overwritten by kernel.
struct xsd_sockmsg
{
uint32_t type; /* XS_??? */
uint32_t req_id;/* Request identifier, echoed in daemon's response. */
uint32_t tx_id; /* Transaction id (0 if not related to a transaction). */
uint32_t len; /* Length of data following this. */
/* Generally followed by nul-terminated string(s). */
};
Before there was only one request at a time so req_id could simply be
forwarded back and forth. To allow simultaneous requests we need a
different req_id for each message thus kernel keeps a monotonic increasing
counter for this field and is written on every request irrespective of
userspace value.
Forwarding again the req_id on userspace requests is not a solution because
we would open the possibility of userspace-generated req_id colliding with
kernel ones. So this patch instead takes another route which is to
artificially keep user req_id while keeping the xenbus logic as is. We do
that by saving the original req_id before xs_send(), use the private kernel
counter as req_id and then once reply comes and was validated, we restore
back the original req_id.
Cc: <stable@vger.kernel.org> # 4.11
Fixes: fd8aa9095a ("xen: optimize xenbus driver for multiple concurrent xenstore accesses")
Reported-by: Bhavesh Davda <bhavesh.davda@oracle.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
-----BEGIN PGP SIGNATURE-----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=p0Hm
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-4.16-2' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
"A few dma-mapping fixes for the fallout from the changes in rc1"
* tag 'dma-mapping-4.16-2' of git://git.infradead.org/users/hch/dma-mapping:
powerpc/macio: set a proper dma_coherent_mask
dma-mapping: fix a comment typo
dma-direct: comment the dma_direct_free calling convention
dma-direct: mark as is_phys
ia64: fix build failure with CONFIG_SWIOTLB
A few fixes for outstanding MIPS issues:
- An __init section mismatch warning when brcmstb_pm is enabled.
- A regression handling multiple mem=X@Y arguments (4.11).
- A USB Kconfig select warning, and related sparc cleanup (4.16).
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEd80NauSabkiESfLYbAtpk944dnoFAlqGyoAACgkQbAtpk944
dnrYFg//VABBzIxIfX45PyZdCyPwcCPT+kY1CithGSQwn54E14ckP9OMjwSdFeUf
LNYVtolGWUDWnf6QDYRMeIBfXve8Yury2ekEezJcq5fZlyHJltDnYnGedqfgl7mT
bSJ9in1nPJnV7O68A53YJD+hDdXbBWcHx0g11nOAXGjKOoZecx9WcN/tjecaC12f
9qnsK3q3PDiDPXkl2u9hPBKkEVzK7aZucrVq92ledHcaO+XM+h7bYKRlNP94VxCq
KPzytCbxHRO3VxO7YazE+C6pBVlOMWm4on665qwIqI+huyUV8RTnAsNXk+F0k1kj
QSTa5dr9bgfb1AdRJQeGyHBFcx2rgfcVQ0AEvbPdsiraIDImBT4MpVmq0t7lGJkN
SoMw/bNovlHiNsnU3hpMo8x4wLJ21PFmZ8vBnpn5aVZWpnMaYbmTnD+53WzVuocA
zgARVOYDoAU2rSyrYpnhQGD3f4K7D8e3hHc3SaYpDbBRop/7NGaU8+l+y65bny8B
gNrPNVrJ4+W5se3/ljmhai0/iF4cnqF2UljRxGkqhuUGhb03zDMlxlLe4xzv5au1
fBPowJzueq+b2i7eJ3RZeHs1rZb1O2t18Aud+jv1KSc3cnHmoiBMxcP2QCcknV9F
JMXJ0k6jTK/aArrvNrZeOgMrUXBhzs716g4zUlsCXgy7CVBTUPA=
=BGD8
-----END PGP SIGNATURE-----
Merge tag 'mips_fixes_4.16_2' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips
Pull MIPS fixes from James Hogan:
"A few fixes for outstanding MIPS issues:
- an __init section mismatch warning when brcmstb_pm is enabled
- a regression handling multiple mem=X@Y arguments (4.11)
- a USB Kconfig select warning, and related sparc cleanup (4.16)"
* tag 'mips_fixes_4.16_2' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips:
sparc,leon: Select USB_UHCI_BIG_ENDIAN_{MMIO,DESC}
usb: Move USB_UHCI_BIG_ENDIAN_* out of USB_SUPPORT
MIPS: Fix incorrect mem=X@Y handling
MIPS: BMIPS: Fix section mismatch warning
non-zero error with 0). This is particularly important given DM
core's increased use of chained bios.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJahv8zAAoJEMUj8QotnQNaiCEH/Attdh6bOzUImbdxIpFWJNNk
F3Jyhge+OI3OHTAbyslFBl3kF0M7jZS3xq9wLpyIb/iIBs6o0N7eGNjkVuDg+Xnw
/SwWNyM1KBr+eYIs55T3KY1vX4YKzwO65hm4sXN6GiSMxPeFsXRTcPJKYzhW42ST
2gKqbtWG9JDyAZgdIFe0AYQF+oVYPX8lCEPNXy7WtmMCFjRan/g7FT0i14GSHy7S
YnQn+Db6Z/BzApDxAozrzj6OUxlVAgIo+6qp/jR8CoN4TX/V8L6gmLWlirrTJxr0
9hET9/NFMWoR9j3Jfatw2YyuMV2LnMo9FJVW9+cRHMLi5NSUdk03A+H1CgsTSNk=
=z7xt
-----END PGP SIGNATURE-----
Merge tag 'for-4.16/dm-chained-bios-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fix from Mike Snitzer:
"Fix for DM core to properly propagate errors (avoids overriding
non-zero error with 0). This is particularly important given DM core's
increased use of chained bios"
* tag 'for-4.16/dm-chained-bios-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: correctly handle chained bios in dec_pending()
Regression fix in keyboard support for Dell laptops.
Prevent out-of-boundary write in WMI bus driver.
Increase timeout to read functional key status on Lenovo laptops.
The following is an automated git shortlog grouped by driver:
dell-laptop:
- Removed duplicates in DMI whitelist
- fix kbd_get_state's request value
ideapad-laptop:
- Increase timeout to wait for EC answer
wmi:
- fix off-by-one write in wmi_dev_probe()
-----BEGIN PGP SIGNATURE-----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=VkoD
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v4.16-4' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver fixes from Andy Shevchenko:
- regression fix in keyboard support for Dell laptops
- prevent out-of-boundary write in WMI bus driver
- increase timeout to read functional key status on Lenovo laptops
* tag 'platform-drivers-x86-v4.16-4' of git://git.infradead.org/linux-platform-drivers-x86:
platform/x86: dell-laptop: Removed duplicates in DMI whitelist
platform/x86: dell-laptop: fix kbd_get_state's request value
platform/x86: ideapad-laptop: Increase timeout to wait for EC answer
platform/x86: wmi: fix off-by-one write in wmi_dev_probe()
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJahnE9AAoJEAx081l5xIa+io0QAJlHvqgoDwzgzEJ2ORyLEMkR
GOg79Bq7Km3KEtrPNMYpVC/c0jsZHeaYIYdo0RhRhpeJRJtuudcqielyVsTGPbBL
Hb7rE2XrcfT3ttmcAe/1OlwVhEyzn9+6DEMIQgY1nYmxBjTMCoeZisOkUSNZzMrk
f5/x+4lGp4mSJ33ruKI01pq22DPDXC7rKobjr22OiZSSr1Gw9ZVvTBdPi/zU6izi
vqNjzgdTnBfW2lOqB/MZneUioXUsagZ+GahCm0AxUYUIFbuUtwnu/dG7eljhjQZg
pXLcsnssXn4+a9Q2uLZ1FSXBei7m6ye23UmRWW8omS45sfXPVsfeNcP9WHISE/Ln
7HDlIdU+KOvTLnq4dLbeWTPgK30cokXJ7SVFR+R3VyVB4hWVDLwZzXSMRnLlxUUT
qc0+9txZDkTBo6COjRHt0B3Umw3n2NABa0cx8T44m/N2S0pNdgksxltZIq84GzbL
btRIYf5LOqJeClzlT7X+XfSOGycEpeKul1NecfBHlW3UHI7EupN5X28hd7nLVM8E
lGkljaOezFhSqBSDkR2dQueY04ZsdGUH+7ehh3cLoMpxlsj/CHeh7BNre0Lzs+LT
1q02X/YyeB/ErMCQypN1hBrRk5D5TSDBjAVb5UhyUClFONgakdnfGgvby8jQ6pqh
WeuBV0kG31A8c/+OXjn+
=+PbR
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-for-v4.16-rc2' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"One nouveau regression fix, one AMD quirk and a full set of i915
fixes.
The i915 fixes are mostly for things caught by their CI system, main
ones being DSI panel fixes and GEM fixes"
* tag 'drm-fixes-for-v4.16-rc2' of git://people.freedesktop.org/~airlied/linux:
drm/nouveau: Make clock gate support conditional
drm/i915: Fix DSI panels with v1 MIPI sequences without a DEASSERT sequence v3
drm/i915: Free memdup-ed DSI VBT data structures on driver_unload
drm/i915: Add intel_bios_cleanup() function
drm/i915/vlv: Add cdclk workaround for DSI
drm/i915/gvt: fix one typo of render_mmio trace
drm/i915/gvt: Support BAR0 8-byte reads/writes
drm/i915/gvt: add 0xe4f0 into gen9 render list
drm/i915/pmu: Fix building without CONFIG_PM
drm/i915/pmu: Fix sleep under atomic in RC6 readout
drm/i915/pmu: Fix PMU enable vs execlists tasklet race
drm/i915: Lock out execlist tasklet while peeking inside for busy-stats
drm/i915/breadcrumbs: Ignore unsubmitted signalers
drm/i915: Don't wake the device up to check if the engine is asleep
drm/i915: Avoid truncation before clamping userspace's priority value
drm/i915/perf: Fix compiler warning for string truncation
drm/i915/perf: Fix compiler warning for string truncation
drm/amdgpu: add new device to use atpx quirk
dec_pending() is given an error status (possibly 0) to be recorded
against a bio. It can be called several times on the one 'struct
dm_io', and it is careful to only assign a non-zero error to
io->status. However when it then assigned io->status to bio->bi_status,
it is not careful and could overwrite a genuine error status with 0.
This can happen when chained bios are in use. If a bio is chained
beneath the bio that this dm_io is handling, the child bio might
complete and set bio->bi_status before the dm_io completes.
This has been possible since chained bios were introduced in 3.14, and
has become a lot easier to trigger with commit 18a25da843 ("dm: ensure
bio submission follows a depth-first tree walk") as that commit caused
dm to start using chained bios itself.
A particular failure mode is that if a bio spans an 'error' target and a
working target, the 'error' fragment will complete instantly and set the
->bi_status, and the other fragment will normally complete a little
later, and will clear ->bi_status.
The fix is simply to only assign io_error to bio->bi_status when
io_error is not zero.
Reported-and-tested-by: Milan Broz <gmazyland@gmail.com>
Cc: stable@vger.kernel.org (v3.14+)
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Since commit ad67b74d24 ("printk: hash addresses printed with %p")
pointers are being hashed when printed. Displaying the virtual memory at
bootup time is not helpful. so delete the prints.
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
We'd never implemented Multi-MSI support with GICv2m, because
it is weird and clunky, and you'd think people would rather use
MSI-X.
Turns out there is still plenty of devices out there that rely
on Multi-MSI. Oh well, let's teach that trick to the v2m widget,
it is not a big deal anyway.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
On some platforms there's an ITS available but it's not enabled
because reading or writing the registers is denied by the
firmware. In fact, reading or writing them will cause the system
to reset. We could remove the node from DT in such a case, but
it's better to skip nodes that are marked as "disabled" in DT so
that we can describe the hardware that exists and use the status
property to indicate how the firmware has configured things.
Cc: Stuart Yoder <stuyoder@gmail.com>
Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
A DMB instruction can be used to ensure the relative order of only
memory accesses before and after the barrier. Since writes to system
registers are not memory operations, barrier DMB is not sufficient
for observability of memory accesses that occur before ICC_SGI1R_EL1
writes.
A DSB instruction ensures that no instructions that appear in program
order after the DSB instruction, can execute until the DSB instruction
has completed.
Cc: stable@vger.kernel.org
Acked-by: Will Deacon <will.deacon@arm.com>,
Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Commit 7778c4b27c ("irqchip: mips-gic: Use pcpu_masks to avoid reading
GIC_SH_MASK*") removed the read of the hardware mask register when
handling shared interrupts, instead using the driver's shadow pcpu_masks
entry as the effective mask. Unfortunately this did not take account of
the write to pcpu_masks during gic_shared_irq_domain_map, which
effectively unmasks the interrupt early. If an interrupt is asserted,
gic_handle_shared_int decodes and processes the interrupt even though it
has not yet been unmasked via gic_unmask_irq, which also sets the
appropriate bit in pcpu_masks.
On the MIPS Boston board, when a console command line of
"console=ttyS0,115200n8r" is passed, the modem status IRQ is enabled in
the UART, which is immediately raised to the GIC. The interrupt has been
mapped, but no handler has yet been registered, nor is it expected to be
unmasked. However, the write to pcpu_masks in gic_shared_irq_domain_map
has effectively unmasked it, resulting in endless reports of:
[ 5.058454] irq 13, desc: ffffffff80a7ad80, depth: 1, count: 0, unhandled: 0
[ 5.062057] ->handle_irq(): ffffffff801b1838,
[ 5.062175] handle_bad_irq+0x0/0x2c0
Where IRQ 13 is the UART interrupt.
To fix this, just remove the write to pcpu_masks in
gic_shared_irq_domain_map. The existing write in gic_unmask_irq is the
correct place for what is now the effective unmasking.
Cc: stable@vger.kernel.org
Fixes: 7778c4b27c ("irqchip: mips-gic: Use pcpu_masks to avoid reading GIC_SH_MASK*")
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Reviewed-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The recently introduced clock gate support breaks on Tegra chips because
no thermal support is enabled for those devices. Conditionalize the code
on the existence of thermal support to fix this.
Fixes: b138eca661 ("drm/nouveau: Add support for basic clockgating on Kepler1")
Cc: Martin Peres <martin.peres@free.fr>
Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2 clean-up patches needed for this MIPI/DSI fix,
and many fixes for GEM including fixes for Perf OA and PMU,
and fixes on scheduler and preemption.
This also includes GVT fixes: "This has one to fix GTT mmio 8b
access from guest and two simple ones for mmio switch and typo fix"
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJahOllAAoJEPpiX2QO6xPKIVYH/RudH1UJQ4trA83c743Aa4Wl
vZis80uUHq5Mhr95bosNZv+RupLbu3EC0GWRlbUlTBX4MlSNSaXYac0/SghNd3KY
EQoNy0xjn7FSOQ+e1g2i2Tul0/Rn1+9NeEAy5jZzNtv0xOxtIdmVc0oCJMJz6Yfl
lsC1ScKvEMbWzjEXbsyjOMuyM9PYHfavU4j2N0cfcSKqopfI64yqUz6IouCXkIpu
Aocxht3gIrd0uJ8zKq7Kj35Dc/1Cxlj0xo4cfIe3SmgVwPiWiLTrMLmuk0Z85tkq
0o9Y9jz9HsNN3Ff6egjc27iwMCOSQzq/CYlLJQ0yL+O1vgVIhl9CECnYcCGprsA=
=uSBC
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-fixes-2018-02-14-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
There are important fixes for VLV with MIPI/DSI panels,
2 clean-up patches needed for this MIPI/DSI fix,
and many fixes for GEM including fixes for Perf OA and PMU,
and fixes on scheduler and preemption.
This also includes GVT fixes: "This has one to fix GTT mmio 8b
access from guest and two simple ones for mmio switch and typo fix"
* tag 'drm-intel-fixes-2018-02-14-1' of git://anongit.freedesktop.org/drm/drm-intel:
drm/i915: Fix DSI panels with v1 MIPI sequences without a DEASSERT sequence v3
drm/i915: Free memdup-ed DSI VBT data structures on driver_unload
drm/i915: Add intel_bios_cleanup() function
drm/i915/vlv: Add cdclk workaround for DSI
drm/i915/gvt: fix one typo of render_mmio trace
drm/i915/gvt: Support BAR0 8-byte reads/writes
drm/i915/gvt: add 0xe4f0 into gen9 render list
drm/i915/pmu: Fix building without CONFIG_PM
drm/i915/pmu: Fix sleep under atomic in RC6 readout
drm/i915/pmu: Fix PMU enable vs execlists tasklet race
drm/i915: Lock out execlist tasklet while peeking inside for busy-stats
drm/i915/breadcrumbs: Ignore unsubmitted signalers
drm/i915: Don't wake the device up to check if the engine is asleep
drm/i915: Avoid truncation before clamping userspace's priority value
drm/i915/perf: Fix compiler warning for string truncation
drm/i915/perf: Fix compiler warning for string truncation
- Revert a problematic EC driver change from the 4.13 cycle that
introduced a system resume regression on Thinkpad X240 (Rafael
Wysocki).
- Clean up device tables handling in the ACPI core and the related
part of the device properties framework (Andy Shevchenko).
- Update the sysfs ABI documentatio of the dock and the INT3407
special device drivers (Aishwarya Pant).
- Add an expected switch fall-through marker to the SPCR table
parsing code (Gustavo Silva).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=gdK1
-----END PGP SIGNATURE-----
Merge tag 'acpi-4.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix a system resume regression from the 4.13 cycle, clean up
device table handling in the ACPI core, update sysfs ABI documentation
of a couple of drivers and add an expected switch fall-through marker
to the SPCR table parsing code.
Specifics:
- Revert a problematic EC driver change from the 4.13 cycle that
introduced a system resume regression on Thinkpad X240 (Rafael
Wysocki).
- Clean up device tables handling in the ACPI core and the related
part of the device properties framework (Andy Shevchenko).
- Update the sysfs ABI documentatio of the dock and the INT3407
special device drivers (Aishwarya Pant).
- Add an expected switch fall-through marker to the SPCR table
parsing code (Gustavo Silva)"
* tag 'acpi-4.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: dock: document sysfs interface
ACPI / DPTF: Document dptf_power sysfs atttributes
device property: Constify device_get_match_data()
ACPI / bus: Rename acpi_get_match_data() to acpi_device_get_match_data()
ACPI / bus: Remove checks in acpi_get_match_data()
ACPI / bus: Do not traverse through non-existed device table
ACPI: SPCR: Mark expected switch fall-through in acpi_parse_spcr
ACPI / EC: Restore polling during noirq suspend/resume phases
- Fix a recently introduced build issue related to cpuidle by
covering all of the relevant combinations of Kconfig options
in its header (Rafael Wysocki).
- Add missing invocation of pm_runtime_drop_link() to the
!CONFIG_SRCU variant of __device_link_del() (Lukas Wunner).
- Fix unbalanced IRQ enable in the wakeup interrupts framework
(Tony Lindgren).
- Update cpuidle sysfs ABI documentation (Aishwarya Pant).
- Use GFP_KERNEL instead of GFP_ATOMIC for allocating memory
in dev_pm_opp_init_cpufreq_table() (Jia-Ju Bai).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=U6ev
-----END PGP SIGNATURE-----
Merge tag 'pm-4.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a recently introduced build issue related to cpuidle and two
bugs in the PM core, update cpuidle documentation and clean up memory
allocations in the operating performance points (OPP) framework.
Specifics:
- Fix a recently introduced build issue related to cpuidle by
covering all of the relevant combinations of Kconfig options
in its header (Rafael Wysocki).
- Add missing invocation of pm_runtime_drop_link() to the
!CONFIG_SRCU variant of __device_link_del() (Lukas Wunner).
- Fix unbalanced IRQ enable in the wakeup interrupts framework
(Tony Lindgren).
- Update cpuidle sysfs ABI documentation (Aishwarya Pant).
- Use GFP_KERNEL instead of GFP_ATOMIC for allocating memory
in dev_pm_opp_init_cpufreq_table() (Jia-Ju Bai)"
* tag 'pm-4.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: cpuidle: Fix cpuidle_poll_state_init() prototype
PM / runtime: Update links_count also if !CONFIG_SRCU
PM / wakeirq: Fix unbalanced IRQ enable for wakeirq
Documentation/ABI: update cpuidle sysfs documentation
opp: cpu: Replace GFP_ATOMIC with GFP_KERNEL in dev_pm_opp_init_cpufreq_table
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=kHhI
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-linus-v4.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fix from Guenter Roeck:
"Fix bad temperature display on Ryzen/Threadripper"
* tag 'hwmon-for-linus-v4.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (k10temp) Only apply temperature offset if result is positive
This includes a bugfix for virtio 9p fs.
It also fixes hybernation for s390 guests with virtio devices.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJahJ2jAAoJECgfDbjSjVRpGbsIAKvK50iQK/5Qe0X78DCv/9pW
gVkW29bAKG8D8JcI/EViLFW3IgeDM1a2fcbCoSiOTzydAf6nMTI0vZqURopQbXKC
teJw7PwHjaZ9Y3IL/mzMODrhZvZrl9iI2yAQoZqoeCeaX76t5k8kYB35U4Uuiw7Y
gKWOpuOPEZx2mKrPCmIN2X0VrETJz122bNyb5DB+V4oLAx/9PolGGiGBmyu61pv/
Fx1PQ6at8/M+74tFeeFwKbuUf5GmdanqPVCZlJJPKa2acaRtBFhI01OhBMIxAUYj
9+1dzp5E4KjmGbz7Fd3dsleRLCV/q4E8gDWLbZVx4p2vVsp7edxk/29kcSVrhlE=
=c8q9
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"This includes a bugfix for virtio 9p fs. It also fixes hybernation for
s390 guests with virtio devices"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio/s390: implement PM operations for virtio_ccw
9p/trans_virtio: discard zero-length reply
Now that USB_UHCI_BIG_ENDIAN_MMIO and USB_UHCI_BIG_ENDIAN_DESC are moved
outside of the USB_SUPPORT conditional, simply select them from
SPARC_LEON rather than by the symbol's defaults in drivers/usb/Kconfig,
similar to how it is done for USB_EHCI_BIG_ENDIAN_MMIO and
USB_EHCI_BIG_ENDIAN_DESC.
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Corentin Labbe <clabbe.montjoie@gmail.com>
Cc: sparclinux@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Acked-by: David S. Miller <davem@davemloft.net>
Patchwork: https://patchwork.linux-mips.org/patch/18560/
Move the Kconfig symbols USB_UHCI_BIG_ENDIAN_MMIO and
USB_UHCI_BIG_ENDIAN_DESC out of drivers/usb/host/Kconfig, which is
conditional upon USB && USB_SUPPORT, so that it can be freely selected
by platform Kconfig symbols in architecture code.
For example once the MIPS_GENERIC platform selects are fixed in commit
2e6522c565 ("MIPS: Fix typo BIG_ENDIAN to CPU_BIG_ENDIAN"), the MIPS
32r6_defconfig warns like so:
warning: (MIPS_GENERIC) selects USB_UHCI_BIG_ENDIAN_MMIO which has unmet direct dependencies (USB_SUPPORT && USB)
warning: (MIPS_GENERIC) selects USB_UHCI_BIG_ENDIAN_DESC which has unmet direct dependencies (USB_SUPPORT && USB)
Fixes: 2e6522c565 ("MIPS: Fix typo BIG_ENDIAN to CPU_BIG_ENDIAN")
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Corentin Labbe <clabbe.montjoie@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: linux-usb@vger.kernel.org
Cc: linux-mips@linux-mips.org
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Patchwork: https://patchwork.linux-mips.org/patch/18559/
Fixed a mistake in which several entries were duplicated in the DMI list
from the below commit
fe486138 platform/x86: dell-laptop: Add 2-in-1 devices to the DMI whitelist
Signed-off-by: Alexander Abrosimov <alexander.n.abrosimov@gmail.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Commit 9862b43624 ("platform/x86: dell-laptop: Allocate buffer on heap
rather than globally")
broke one request, changed it back to the original value.
Tested on a Dell E6540, backlight came back.
Fixes: 9862b43624 ("platform/x86: dell-laptop: Allocate buffer on heap rather than globally")
Signed-off-by: Laszlo Toth <laszlth@gmail.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Lenovo E41-20 needs more time than 100ms to read VPC,
the funtion keys always failed responding.
Increase timeout to get the value from VPC, then
the funtion keys like mic mute key work well.
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Pull NVMe fixes from Keith:
"After syncing with Christoph and Sagi, we feel this is a good time to
send our latest fixes across most of the nvme components for 4.16"
* 'nvme-4.16-rc' of git://git.infradead.org/nvme:
nvme-rdma: fix sysfs invoked reset_ctrl error flow
nvmet: Change return code of discard command if not supported
nvme-pci: Fix timeouts in connecting state
nvme-pci: Remap CMB SQ entries on every controller reset
nvme: fix the deadlock in nvme_update_formats
nvme: Don't use a stack buffer for keep-alive command
nvme_fc: cleanup io completion
nvme_fc: correct abort race condition on resets
nvme: Fix discard buffer overrun
nvme: delete NVME_CTRL_LIVE --> NVME_CTRL_CONNECTING transition
nvme-rdma: use NVME_CTRL_CONNECTING state to mark init process
nvme: rename NVME_CTRL_RECONNECTING state to NVME_CTRL_CONNECTING
Pull x86 PTI and Spectre related fixes and updates from Ingo Molnar:
"Here's the latest set of Spectre and PTI related fixes and updates:
Spectre:
- Add entry code register clearing to reduce the Spectre attack
surface
- Update the Spectre microcode blacklist
- Inline the KVM Spectre helpers to get close to v4.14 performance
again.
- Fix indirect_branch_prediction_barrier()
- Fix/improve Spectre related kernel messages
- Fix array_index_nospec_mask() asm constraint
- KVM: fix two MSR handling bugs
PTI:
- Fix a paranoid entry PTI CR3 handling bug
- Fix comments
objtool:
- Fix paranoid_entry() frame pointer warning
- Annotate WARN()-related UD2 as reachable
- Various fixes
- Add Add Peter Zijlstra as objtool co-maintainer
Misc:
- Various x86 entry code self-test fixes
- Improve/simplify entry code stack frame generation and handling
after recent heavy-handed PTI and Spectre changes. (There's two
more WIP improvements expected here.)
- Type fix for cache entries
There's also some low risk non-fix changes I've included in this
branch to reduce backporting conflicts:
- rename a confusing x86_cpu field name
- de-obfuscate the naming of single-TLB flushing primitives"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
x86/entry/64: Fix CR3 restore in paranoid_exit()
x86/cpu: Change type of x86_cache_size variable to unsigned int
x86/spectre: Fix an error message
x86/cpu: Rename cpu_data.x86_mask to cpu_data.x86_stepping
selftests/x86/mpx: Fix incorrect bounds with old _sigfault
x86/mm: Rename flush_tlb_single() and flush_tlb_one() to __flush_tlb_one_[user|kernel]()
x86/speculation: Add <asm/msr-index.h> dependency
nospec: Move array_index_nospec() parameter checking into separate macro
x86/speculation: Fix up array_index_nospec_mask() asm constraint
x86/debug: Use UD2 for WARN()
x86/debug, objtool: Annotate WARN()-related UD2 as reachable
objtool: Fix segfault in ignore_unreachable_insn()
selftests/x86: Disable tests requiring 32-bit support on pure 64-bit systems
selftests/x86: Do not rely on "int $0x80" in single_step_syscall.c
selftests/x86: Do not rely on "int $0x80" in test_mremap_vdso.c
selftests/x86: Fix build bug caused by the 5lvl test which has been moved to the VM directory
selftests/x86/pkeys: Remove unused functions
selftests/x86: Clean up and document sscanf() usage
selftests/x86: Fix vDSO selftest segfault for vsyscall=none
x86/entry/64: Remove the unused 'icebp' macro
...
x86_mask is a confusing name which is hard to associate with the
processor's stepping.
Additionally, correct an indent issue in lib/cpu.c.
Signed-off-by: Jia Zhang <qianyue.zj@alibaba-inc.com>
[ Updated it to more recent kernels. ]
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@alien8.de
Cc: tony.luck@intel.com
Link: http://lkml.kernel.org/r/1514771530-70829-1-git-send-email-qianyue.zj@alibaba-inc.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
So far models of the Dell Venue 8 Pro, with a panel with MIPI panel
index = 3, one of which has been kindly provided to me by Jan Brummer,
where not working with the i915 driver, giving a black screen on the
first modeset.
The problem with at least these Dells is that their VBT defines a MIPI
ASSERT sequence, but not a DEASSERT sequence. Instead they DEASSERT the
reset in their INIT_OTP sequence, but the deassert must be done before
calling intel_dsi_device_ready(), so that is too late.
Simply doing the INIT_OTP sequence earlier is not enough to fix this,
because the INIT_OTP sequence also sends various MIPI packets to the
panel, which can only happen after calling intel_dsi_device_ready().
This commit fixes this by splitting the INIT_OTP sequence into everything
before the first DSI packet and everything else, including the first DSI
packet. The first part (everything before the first DSI packet) is then
used as deassert sequence.
Changed in v2:
-Split the init OTP sequence into a deassert reset and the actual init
OTP sequence, instead of calling it earlier and then having the first
mipi_exec_send_packet() call call intel_dsi_device_ready().
Changes in v3:
-Move the whole shebang to intel_bios.c
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82880
References: https://bugs.freedesktop.org/show_bug.cgi?id=101205
Cc: Jan-Michael Brummer <jan.brummer@tabos.org>
Reported-by: Jan-Michael Brummer <jan.brummer@tabos.org>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214082151.25015-3-hdegoede@redhat.com
(cherry picked from commit fb38e7ade9)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Make intel_bios_cleanup function free the DSI VBT data structures which
are memdup-ed by parse_mipi_config() and parse_mipi_sequence().
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214082151.25015-2-hdegoede@redhat.com
(cherry picked from commit e1b86c85f6)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add an intel_bios_cleanup() function to act as counterpart of
intel_bios_init() and move the cleanup of vbt related resources there,
putting it in the same file as the allocation.
Changed in v2:
-While touching the code anyways, remove the unnecessary:
if (dev_priv->vbt.child_dev) done before kfree(dev_priv->vbt.child_dev)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214082151.25015-1-hdegoede@redhat.com
(cherry picked from commit 785f076b3b)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
At least on the Chuwi Vi8 (non pro/plus) the LCD panel will show an image
shifted aprox. 20% to the left (with wraparound) and sometimes also wrong
colors, showing that the panel controller is starting with sampling the
datastream somewhere mid-line. This happens after the first blanking and
re-init of the panel.
After looking at drm.debug output I noticed that initially we inherit the
cdclk of 333333 KHz set by the GOP, but after the re-init we picked 266667
KHz, which turns out to be the cause of this problem, a quick hack to hard
code the cdclk to 333333 KHz makes the problem go away.
I've tested this on various Bay Trail devices, to make sure this not does
cause regressions on other devices and the higher cdclk does not cause
any problems on the following devices:
-GP-electronic T701 1024x600 333333 KHz cdclk after this patch
-PEAQ C1010 1920x1200 333333 KHz cdclk after this patch
-PoV mobii-wintab-800w 800x1280 333333 KHz cdclk after this patch
-Asus Transformer-T100TA 1368x768 320000 KHz cdclk after this patch
Also interesting wrt this is the comment in vlv_calc_cdclk about the
existing workaround to avoid 200 Mhz as clock because that causes issues
in some cases.
This commit extends the "do not use 200 Mhz" workaround with an extra
check to require atleast 320000 KHz (avoiding 266667 KHz) when a DSI
panel is active.
Changes in v2:
-Change the commit message and the code comment to not treat the GOP as
a reference, the GOP should not be treated as a reference
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171220105017.11259-1-hdegoede@redhat.com
(cherry picked from commit c8dae55a8c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
A larger batch of fixes than we'd like. Roughly 1/3 fixes for new code, 1/3
fixes for stable and 1/3 minor things.
There's four commits fixing bugs when using 16GB huge pages on hash, caused by
some of the preparatory changes for pkeys.
Two fixes for bugs in the enhanced IRQ soft masking for local_t, one of which
broke KVM in some circumstances.
Four fixes for Power9. The most bizarre being a bug where futexes stopped
working because a NULL pointer dereference didn't trap during early boot (it
aliased the kernel mapping). A fix for memory hotplug when using the Radix MMU,
and a fix for live migration of guests using the Radix MMU.
Two fixes for hotplug on pseries machines. One where we weren't correctly
updating NUMA info when CPUs are added and removed. And the other fixes
crashes/hangs seen when doing memory hot remove during boot, which is apparently
a thing people do.
Finally a handful of build fixes for obscure configs and other minor fixes.
Thanks to:
Alexey Kardashevskiy, Aneesh Kumar K.V, Balbir Singh, Colin Ian King, Daniel
Henrique Barboza, Florian Weimer, Guenter Roeck, Harish, Laurent Vivier,
Madhavan Srinivasan, Mauricio Faria de Oliveira, Nathan Fontenot, Nicholas
Piggin, Sam Bobroff.
-----BEGIN PGP SIGNATURE-----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=BmuL
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"A larger batch of fixes than we'd like. Roughly 1/3 fixes for new
code, 1/3 fixes for stable and 1/3 minor things.
There's four commits fixing bugs when using 16GB huge pages on hash,
caused by some of the preparatory changes for pkeys.
Two fixes for bugs in the enhanced IRQ soft masking for local_t, one
of which broke KVM in some circumstances.
Four fixes for Power9. The most bizarre being a bug where futexes
stopped working because a NULL pointer dereference didn't trap during
early boot (it aliased the kernel mapping). A fix for memory hotplug
when using the Radix MMU, and a fix for live migration of guests using
the Radix MMU.
Two fixes for hotplug on pseries machines. One where we weren't
correctly updating NUMA info when CPUs are added and removed. And the
other fixes crashes/hangs seen when doing memory hot remove during
boot, which is apparently a thing people do.
Finally a handful of build fixes for obscure configs and other minor
fixes.
Thanks to: Alexey Kardashevskiy, Aneesh Kumar K.V, Balbir Singh, Colin
Ian King, Daniel Henrique Barboza, Florian Weimer, Guenter Roeck,
Harish, Laurent Vivier, Madhavan Srinivasan, Mauricio Faria de
Oliveira, Nathan Fontenot, Nicholas Piggin, Sam Bobroff"
* tag 'powerpc-4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Fix to use ucontext_t instead of struct ucontext
powerpc/kdump: Fix powernv build break when KEXEC_CORE=n
powerpc/pseries: Fix build break for SPLPAR=n and CPU hotplug
powerpc/mm/hash64: Zero PGD pages on allocation
powerpc/mm/hash64: Store the slot information at the right offset for hugetlb
powerpc/mm/hash64: Allocate larger PMD table if hugetlb config is enabled
powerpc/mm: Fix crashes with 16G huge pages
powerpc/mm: Flush radix process translations when setting MMU type
powerpc/vas: Don't set uses_vas for kernel windows
powerpc/pseries: Enable RAS hotplug events later
powerpc/mm/radix: Split linear mapping on hot-unplug
powerpc/64s/radix: Boot-time NULL pointer protection using a guard-PID
ocxl: fix signed comparison with less than zero
powerpc/64s: Fix may_hard_irq_enable() for PMI soft masking
powerpc/64s: Fix MASKABLE_RELON_EXCEPTION_HV_OOL macro
powerpc/numa: Invalidate numa_cpu_lookup_table on cpu remove
When reset_controller that is invoked by sysfs fails,
it enters an error flow which practically removes the
nvme ctrl entirely (similar to delete_ctrl flow). It
causes the system to hang, since a sysfs attribute cannot
be unregistered by one of its own methods.
This can be fixed by calling delete_ctrl as a work rather
than sequential code. In addition, it should give the ctrl
a chance to recover using reconnection mechanism (consistant
with FC reset_ctrl error flow). Also, while we're here, return
suitable errno in case the reset ended with non live ctrl.
Signed-off-by: Nitzan Carmi <nitzanc@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Execute discard command on block device that doesn't support it
should return success.
Returning internal error while using multi-path fails the path.
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Suspend/Resume to/from disk currently fails. Let us wire
up the necessary callbacks. This is mostly just forwarding
the requests to the virtio drivers. The only thing that
has to be done in virtio_ccw itself is to re-set the
virtio revision.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20171207141102.70190-2-borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
[CH: merged <20171218083706.223836-1-borntraeger@de.ibm.com> to fix
!CONFIG_PM configs]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The optional DT parameter max-frequency could init the max bus frequency.
So take care of this, before setting the max bus frequency.
Fixes: 660fc733bd ("mmc: bcm2835: Add new driver for the sdhost controller.")
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Cc: <stable@vger.kernel.org> # 4.12+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This reverts commit 0a44697627.
This commit was initially intended to fix problems with hs200 and hs400
on some boards, mainly the odroid-c2. The OC2 (Rev 0.2) I have performs
well in this modes, so I could not confirm these issues.
We've had several reports about the issues being still present on (some)
OC2, so apparently, this change does not do what it was supposed to do.
Maybe the eMMC signal quality is on the edge on the board. This may
explain the variability we see in term of stability, but this is just a
guess. Lowering the max_frequency to 100Mhz seems to do trick for those
affected by the issue
Worse, the commit created new issues (CRC errors and hangs) on other
boards, such as the kvim 1 and 2, the p200 or the libretech-cc.
According to amlogic, the Tx phase should not be tuned and left in its
default configuration, so it is best to just revert the commit.
Fixes: 0a44697627 ("mmc: meson-gx: include tx phase in the tuning process")
Cc: <stable@vger.kernel.org> # 4.14+
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Fix one typo of render_mmio trace, exchange the mmio value of old and new.
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
GGTT is in BAR0 with 8 bytes aligned. With a qemu patch (commit:
38d49e8c1523d97d2191190d3f7b4ce7a0ab5aa3), VFIO can use 8-byte reads/
writes to access it.
This patch is to support the 8-byte GGTT reads/writes.
Ideally, we would like to support 8-byte reads/writes for the total BAR0.
But it needs more work for handling 8-byte MMIO reads/writes.
This patch can fix the issue caused by partial updating GGTT entry, during
guest booting up.
v3:
- Use intel_vgpu_get_bar_gpa() stead. (Zhenyu)
- Include all the GGTT checking logic in gtt_entry(). (Zhenyu)
v2:
- Limit to GGTT entry. (Zhenyu)
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
