Commit graph

79,469 commits

Author SHA1 Message Date
Eric Dumazet
3347c96029 ipv4: gso: make inet_gso_segment() stackable
In order to support GSO on IPIP, we need to make
inet_gso_segment() stackable.

It should not assume network header starts right after mac
header.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-19 19:36:18 -04:00
Eric Dumazet
2d26f0a3c0 ipv4: generalize gre_handle_offloads
This patch makes gre_handle_offloads() more generic
and rename it to iptunnel_handle_offloads()

This will be used to add GSO/TSO support to IPIP tunnels.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-19 19:36:18 -04:00
Jiri Pirko
ec76aa4985 bonding: add Netlink support active_slave option
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-19 18:58:46 -04:00
Jiri Pirko
90af231106 bonding: add Netlink support mode option
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-19 18:58:46 -04:00
Seif Mazareeb
f2e5ddcc0d net: fix cipso packet validation when !NETLABEL
When CONFIG_NETLABEL is disabled, the cipso_v4_validate() function could loop
forever in the main loop if opt[opt_iter +1] == 0, this will causing a kernel
crash in an SMP system, since the CPU executing this function will
stall /not respond to IPIs.

This problem can be reproduced by running the IP Stack Integrity Checker
(http://isic.sourceforge.net) using the following command on a Linux machine
connected to DUT:

"icmpsic -s rand -d <DUT IP address> -r 123456"
wait (1-2 min)

Signed-off-by: Seif Mazareeb <seif@marvell.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-19 18:55:42 -04:00
Mika Westerberg
e01f440a68 gpiolib / ACPI: allow passing GPIOF_ACTIVE_LOW for GpioInt resources
The ACPI GpioInt resources contain polarity field that is used to specify
whether the interrupt is active high or low. Since gpiolib supports
GPIOF_ACTIVE_LOW we can pass this information in the flags field in
acpi_find_gpio(), analogous to the DeviceTree version.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-19 23:32:14 +02:00
Mika Westerberg
936e15dd21 gpiolib / ACPI: convert to gpiod interfaces
The new GPIO descriptor based interface is now preferred over the old
integer based one. This patch converts the ACPI GPIO helpers to use this
new interface internally. In addition to that provide compatibility
function acpi_get_gpio_by_index() that converts the returned GPIO
descriptor to an integer.

We also drop acpi_get_gpio() as it is not used anywhere outside
gpiolib-acpi and even there we use acpi_get_gpiod() instead.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-19 23:30:51 +02:00
Alexandre Courbot
bae48da237 gpiolib: add gpiod_get() and gpiod_put() functions
Add gpiod_get(), gpiod_get_index() and gpiod_put() functions that
provide safer management of GPIOs.

These functions put the GPIO framework in line with the conventions of
other frameworks in the kernel, and help ensure every GPIO is declared
properly and valid while it is used.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-19 23:24:56 +02:00
Alexandre Courbot
af8b6375a8 gpiolib: port of_ functions to use gpiod
Refactor the of_ functions of gpiolib to use the now public gpiod
interface, and export of_get_named_gpiod_flags() and
of_get_gpiod_flags() functions.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-19 23:24:52 +02:00
Alexandre Courbot
79a9becda8 gpiolib: export descriptor-based GPIO interface
This patch exports the gpiod_* family of API functions, a safer
alternative to the legacy GPIO interface. Differences between the gpiod
and legacy gpio APIs are:

- gpio works with integers, whereas gpiod operates on opaque handlers
  which cannot be forged or used before proper acquisition
- gpiod get/set functions are aware of the active low state of a GPIO
- gpio consumers should now include <linux/gpio/consumer.h> to access
  the new interface, whereas chips drivers will use
  <linux/gpio/driver.h>

The legacy gpio API is now built as inline functions on top of gpiod.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-19 23:24:45 +02:00
Linus Walleij
b41fb43911 Linux 3.12-rc6
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.15 (GNU/Linux)
 
 iQEcBAABAgAGBQJSYt1vAAoJEHm+PkMAQRiGSosH/RrKaWc9bgfq7AoEXUC3vnhZ
 MX1btSuXMQadTQ8HQo3U33JdWQlqgz8Rj1rOEXPGw/7W3Oyog+jiWmqhdt4C4CKc
 74/RU1y+Rp+tynyUZyq08eaPo0iXTF/pFVuFFhPlqZbDlchjDKg0K3F+SynJlh92
 gD6liV/UjQZExfYGZ8KpoIMfA0cB8jqIYeOCiRu5uaoCz4xWXML2vWWkA4/15gWd
 8K12QVoaH5YcGK6JzkIJGiL2tcUrojTRZIGi3ERozfi7ulkIn14DoRpWZv5Q54/z
 FzNwgfNgcmo6q8ZdscCZa3kaA83BP4W40lYIZyZhpN7i5p0/1Dcw+DgOA2OqSx4=
 =pOPR
 -----END PGP SIGNATURE-----

Merge tag 'v3.12-rc6' into devel

Linux 3.12-rc6

Conflicts:
	drivers/gpio/gpio-lynxpoint.c
2013-10-19 23:24:03 +02:00
Greg Kroah-Hartman
9afcdb10ad xhci: Final patches for 3.13
Hi Greg,
 
 Here's my pull request for usb-next and 3.13.  My xHCI tree is closed
 after this point, since I won't be able to run my full tests while I'm in
 Scotland.  After Kernel Summit, I'll be on vacation with access to email
 from Oct 26th to Nov 6th.
 
 Here's what's in this request:
 
  - Patches to fix USB 2.0 Link PM issues that cause USB 3.0 devices to not
    enumerate or misbehave when plugged into a USB 2.0 port.  Those are
    marked for stable.
 
  - A msec vs jiffies bug fix by xiao jin, which results in fairly harmless
    behavior, and thus isn't marked for stable.
 
  - Xenia's patches to refactor the xHCI command handling code, which makes
    it much more readable and consistent.
 
  - Misc cleanup patches, one by Sachin Kamat and three from Dan Williams.
 
 Here's what's not in this request:
 
  - Dan's two patches to allow the xHCI host to use the "Windows" or "new"
    enumeration scheme.  I did not have time to test those, and I want to
    run them with as many USB devices as I can get a hold of.  That will
    have to wait for 3.14.
 
  - Xenia's patches to remove xhci_readl in favor of readl.  I'll queue
    those for 3.14 after I test them.
 
  - The xHCI streams update, UAS fixes, and usbfs streams support.  I'm not
    comfortable with changes and fixes to that patchset coming in this late.
    I would rather wait for 3.14 and be really sure the streams support is
    stable before we add new userspace API and remove CONFIG_BROKEN from the
    uas driver.
 
  - Julius' patch to clear the port reset bit on hub resume that came in
    a couple days ago.  It looks harmless, but I would rather take the time
    to test and queue it for usb-linus and the stable trees once 3.13-rc1
    is out.
 
 Sarah Sharp
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSYH+2AAoJEBMGWMLi1Gc5XnkP/RN7Npl576unFyKV9alGn+yw
 imimJBKXpzoWomnSQWO/AcPyFxYA2sm22WFVNIyz/qMq2koo5xk9dM1atxr1lAmJ
 NaLnyf0yCKmyTWW+EGlIUa+FBM29WyXnSwMF2UAIN35ZVwqfpJmunLs8kLxW3Sie
 ZJoz2MMZNrgNW83Bj1e3HaRFez4goYx1pslM4MpLuno8pHumrWFu5ySk8naxjRyk
 Yz6DRBHaa8fYLA36Pk+KkmtE9a5JO+ZCe6yMljmj0T6wiawjtzgukO2pUdxjC+b7
 nb/4dsR3nxlpf6O3wR7BRDLcY3zrQM2RjjOuvpyoZ1/kPgtl83RfwkuSWzQ2o+bT
 3tV4K5mIdfwHU+oUqlvzjjGHmjN62bO5g3b0HFRKxcMQL4QxmjuEW9mymXzLx/BT
 9UG9vta6mW6F/dwL2olLIha64a+vTvV3U4Jn4DDAYUtFtEmH0EYLgzBwSLHKm/ZE
 YuroUT7CK6JgLsQHohXQ5jw3sUgsqF4zBL4SvtZrCHSp4agOi+WocMfnPWkETqAo
 mOyw7F9ZouG04hsRs3kbCAwaXiBreSgElVeJXcDtZ8W/zbumLChR9jenM52UxFgk
 TAJ6ymRP7BKdVree9u3i+usQkxLGvf6imtbAiYveR+1EReDxCV7+NRJz/uEdxTDX
 5rLqvhV+1WllJhzRnbao
 =H4xp
 -----END PGP SIGNATURE-----

Merge tag 'for-usb-next-2013-10-17' of git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-next

Sarah writes:

xhci: Final patches for 3.13

Hi Greg,

Here's my pull request for usb-next and 3.13.  My xHCI tree is closed
after this point, since I won't be able to run my full tests while I'm in
Scotland.  After Kernel Summit, I'll be on vacation with access to email
from Oct 26th to Nov 6th.

Here's what's in this request:

 - Patches to fix USB 2.0 Link PM issues that cause USB 3.0 devices to not
   enumerate or misbehave when plugged into a USB 2.0 port.  Those are
   marked for stable.

 - A msec vs jiffies bug fix by xiao jin, which results in fairly harmless
   behavior, and thus isn't marked for stable.

 - Xenia's patches to refactor the xHCI command handling code, which makes
   it much more readable and consistent.

 - Misc cleanup patches, one by Sachin Kamat and three from Dan Williams.

Here's what's not in this request:

 - Dan's two patches to allow the xHCI host to use the "Windows" or "new"
   enumeration scheme.  I did not have time to test those, and I want to
   run them with as many USB devices as I can get a hold of.  That will
   have to wait for 3.14.

 - Xenia's patches to remove xhci_readl in favor of readl.  I'll queue
   those for 3.14 after I test them.

 - The xHCI streams update, UAS fixes, and usbfs streams support.  I'm not
   comfortable with changes and fixes to that patchset coming in this late.
   I would rather wait for 3.14 and be really sure the streams support is
   stable before we add new userspace API and remove CONFIG_BROKEN from the
   uas driver.

 - Julius' patch to clear the port reset bit on hub resume that came in
   a couple days ago.  It looks harmless, but I would rather take the time
   to test and queue it for usb-linus and the stable trees once 3.13-rc1
   is out.

Sarah Sharp
2013-10-19 14:03:44 -07:00
Lars-Peter Clausen
c0de42bf59 ASoC: dmaengine-pcm: Add support for querying DMA capabilities
Currently each platform making use the the generic dmaengine PCM driver still
needs to provide a custom snd_pcm_hardware struct which specifies the
capabilities of the DMA controller, e.g. the maximum period size that can be
supported. This patch adds code which uses the newly introduced
dma_get_slave_caps() API to query this information from the dmaengine driver.
The new code path will only be taken if the 'pcm_hardware' field of the
snd_dmaengine_pcm_config struct is NULL.

The patch also introduces a new 'fifo_size' field to the
snd_dmaengine_dai_dma_data struct which is used to initialize the
snd_pcm_hardware 'fifo_size' field and needs to be set by the DAI driver.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-19 21:26:06 +01:00
Greg Kroah-Hartman
5584cfbafc Merge 3.12-rc6 into usb-next.
We want those USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-19 13:19:07 -07:00
Greg Kroah-Hartman
f7a0fd56e4 Merge 3.12-rc6 into staging-next.
We want these fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-19 13:14:34 -07:00
Greg Kroah-Hartman
a7204d72db Merge 3.12-rc6 into driver-core-next
We want these fixes here too.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-19 13:05:38 -07:00
Greg Kroah-Hartman
dfc568e6bc Merge 3.12-rc6 into char-misc-next
We want the fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-19 13:02:47 -07:00
Marcel Holtmann
4b4148e9ac Bluetooth: Add support for setting DUT mode
The Device Under Test (DUT) mode is useful for doing certification
testing and so expose this as debugfs option.

This mode is actually special since you can only enter it. Restoring
normal operation means that a HCI Reset is required. The current mode
value gets tracked as a new device flag and when disabling it, the
correct command to reset the controller is sent.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-19 18:56:56 +03:00
Marcel Holtmann
4e70c7e71c Bluetooth: Expose debugfs settings for LE connection interval
For testing purposes expose the default LE connection interval values
via debugfs.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-19 18:56:54 +03:00
Marcel Holtmann
06f5b7785a Bluetooth: Add support for setting SSP debug mode
Enabling and disabling SSP debug mode is useful for development. This
adds a debugfs entry that allows to configure the SSP debug mode.

On purpose this has been implemented as debugfs entry and not a public
API since it is really only useful during testing and development.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-19 18:56:52 +03:00
Marcel Holtmann
3497ac84bd Bluetooth: Remove interval parameter from HCI connection
The conn->interval parameter of HCI connections is not used at all
and so just remove it.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-19 16:50:05 +03:00
Marcel Holtmann
79830f66e3 Bluetooth: Select the own address type during initial setup phase
The own address type is based on the fact if the controller has
a public address or not. This means that this detail can be just
configured once during setup phase.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-19 16:28:06 +03:00
Thomas Pugliese
1653d2f88f usb: wusbcore: preserve endianness of cached descriptors
Do not overwrite the multi-byte fields of usb_wa_descriptor with their
cpu format values after reading the descriptor.  Leave the values as
__le16 and swap on use.  This is more consistent with other uses of USB
descriptors.

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-19 05:19:21 -07:00
Namhyung Kim
29ad23b004 ftrace: Add set_graph_notrace filter
The set_graph_notrace filter is analogous to set_ftrace_notrace and
can be used for eliminating uninteresting part of function graph trace
output.  It also works with set_graph_function nicely.

  # cd /sys/kernel/debug/tracing/
  # echo do_page_fault > set_graph_function
  # perf ftrace live true
   2)               |  do_page_fault() {
   2)               |    __do_page_fault() {
   2)   0.381 us    |      down_read_trylock();
   2)   0.055 us    |      __might_sleep();
   2)   0.696 us    |      find_vma();
   2)               |      handle_mm_fault() {
   2)               |        handle_pte_fault() {
   2)               |          __do_fault() {
   2)               |            filemap_fault() {
   2)               |              find_get_page() {
   2)   0.033 us    |                __rcu_read_lock();
   2)   0.035 us    |                __rcu_read_unlock();
   2)   1.696 us    |              }
   2)   0.031 us    |              __might_sleep();
   2)   2.831 us    |            }
   2)               |            _raw_spin_lock() {
   2)   0.046 us    |              add_preempt_count();
   2)   0.841 us    |            }
   2)   0.033 us    |            page_add_file_rmap();
   2)               |            _raw_spin_unlock() {
   2)   0.057 us    |              sub_preempt_count();
   2)   0.568 us    |            }
   2)               |            unlock_page() {
   2)   0.084 us    |              page_waitqueue();
   2)   0.126 us    |              __wake_up_bit();
   2)   1.117 us    |            }
   2)   7.729 us    |          }
   2)   8.397 us    |        }
   2)   8.956 us    |      }
   2)   0.085 us    |      up_read();
   2) + 12.745 us   |    }
   2) + 13.401 us   |  }
  ...

  # echo handle_mm_fault > set_graph_notrace
  # perf ftrace live true
   1)               |  do_page_fault() {
   1)               |    __do_page_fault() {
   1)   0.205 us    |      down_read_trylock();
   1)   0.041 us    |      __might_sleep();
   1)   0.344 us    |      find_vma();
   1)   0.069 us    |      up_read();
   1)   4.692 us    |    }
   1)   5.311 us    |  }
  ...

Link: http://lkml.kernel.org/r/1381739066-7531-5-git-send-email-namhyung@kernel.org

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-10-18 22:23:16 -04:00
Thierry Reding
bd6a9ddcb9 ARM: tegra: Add Tegra114 powergate support
Extend the list of power gates found on Tegra114. Note that there are
now holes in the list, so perhaps a simple array is no longer the best
data structure to represent it.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-10-18 16:28:11 -06:00
Linus Torvalds
797afdf708 ACPI and power management fixes for 3.12-rc6
- intel_pstate fix for misbehavior after system resume if sysfs
    attributes are set in a specific way before the corresponding
    suspend from Dirk Brandewie.
 
  - A recent intel_pstate fix has no effect if unsigned long is 32-bit,
    so fix it up to cover that case as well.
 
  - The s3c64xx cpufreq driver was not updated when the index field of
    struct cpufreq_frequency_table was replaced with driver_data, so
    update it now.  From Charles Keepax.
 
  - The Kconfig help text for ACPI_BUTTON still refers to /proc/acpi/event
    that has been dropped recently, so modify it to remove that reference.
    From Krzysztof Mazur.
 
  - A Lan Tianyu's change adds a missing mutex unlock to an error code
    path in acpi_resume_power_resources().
 
  - Some code related to ACPI power resources, whose very purpose is
    questionable to put it lightly, turns out to cause problems to
    happen during testing on real systems, so remove it completely
    (we may revisit that in the future if there's a compelling enough
    reason).  From Rafael J Wysocki and Aaron Lu.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABCAAGBQJSYZQiAAoJEILEb/54YlRxed8QAJxDNJ4sHEzahsEFREZWwUy6
 KN6yLRFs80aplbiCdNyYQnp5RZ0QqEVq0Vwkur/pxk5j00XJWTMknKvJhiAlIaHd
 l1T1X0Oh3w4Z8h+0l49QaU0z5tHt+dAxzl4ArMlcQ3BQuKf5/8c+dIfNutkWpOWP
 xHIDjEV+Y+8JCQoP92we7BbJpBRqzC3AOr05iH0wUN/i4dZzfqEca6KxTBPSXAcX
 CbEBOXauG4BR4LyEQ2rlEt53FTp7XjZ9my1kKVH6LmtA+HiHeQmZMHTUf9dlaYAH
 1n38ebeIHpskRYhu7nknto1S/mTVKxkzuSQ8TyKM+QOZz9x+WT/uiZjwbxINmxKk
 fLi8TdMdv+WwALAqI36AjgfxdTtQ8Fhs/jSOoCY3KqoE4LMUInq2izWy8ALTQCPm
 8PhM2WiYPFt6qSCqaKLfbbYH3ou6t2PQZihRfqpGEaTatNvwL2AYgl5QhOhs90EV
 kYwZpfxodTNLnk4UfLGASjVEDRxgN7DUSrUvn0z7HmhbH/0YK3OVdLU0UQalAvfR
 eUKYO+aWXzGsJO/ym3qfHkehumReCM62ykf295ApYnt134oqGDe3+Ajgx53WPj/P
 ruIrfkmqDHCXjlVJ8f+UaZ/HXlDLcLrjlIVF1Dp0MKnl49pe+va4OmAxyImvTtFC
 gciZiW+n5uowNojt8yye
 =MV4Q
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI and power management fixes from Rafael Wysocki:

 - intel_pstate fix for misbehavior after system resume if sysfs
   attributes are set in a specific way before the corresponding suspend
   from Dirk Brandewie.

 - A recent intel_pstate fix has no effect if unsigned long is 32-bit,
   so fix it up to cover that case as well.

 - The s3c64xx cpufreq driver was not updated when the index field of
   struct cpufreq_frequency_table was replaced with driver_data, so
   update it now.  From Charles Keepax.

 - The Kconfig help text for ACPI_BUTTON still refers to
   /proc/acpi/event that has been dropped recently, so modify it to
   remove that reference.  From Krzysztof Mazur.

 - A Lan Tianyu's change adds a missing mutex unlock to an error code
   path in acpi_resume_power_resources().

 - Some code related to ACPI power resources, whose very purpose is
   questionable to put it lightly, turns out to cause problems to happen
   during testing on real systems, so remove it completely (we may
   revisit that in the future if there's a compelling enough reason).
   From Rafael J Wysocki and Aaron Lu.

* tag 'pm+acpi-3.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / PM: Drop two functions that are not used any more
  ATA / ACPI: remove power dependent device handling
  cpufreq: s3c64xx: Rename index to driver_data
  ACPI / power: Drop automaitc resume of power resource dependent devices
  intel_pstate: Fix type mismatch warning
  cpufreq / intel_pstate: Fix max_perf_pct on resume
  ACPI: remove /proc/acpi/event from ACPI_BUTTON help
  ACPI / power: Release resource_lock after acpi_power_get_state() return error
2013-10-18 14:26:51 -07:00
Kevin Hilman
ee4383e0c1 Changes needed to drop legacy booting support for some
omap3 boards.
 
 Note that that these are based on a merge of the
 following for the dependencies:
 
 - v3.12-rc5 for fixes to pinctrl mask
 - omap-for-v3.13/dt-signed to avoid pointless merge conflicts
 - omap-for-v3.13/quirk-signed for legacy pdata handling
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.15 (GNU/Linux)
 
 iQIcBAABAgAGBQJSYXP6AAoJEBvUPslcq6Vz2fcQAJyOHsHVNs3vxpB2CbFWzgl7
 D4tFyL3pHlq9+p/VJwthUoY6WIiWIgEcKoLACD39w+EQ3XThcG1coc0TFj8IPxTr
 QOCn5sMu1Z11OKhegcTEhySp8GUrmtNFplMCNK3jPsLjYLdVxOopjziO7qcCd49O
 7pjCPfHoU5NkAACcm2nmE2uAlYP4STpGDnzwsi/aHZZQSIni2MslyeN9LeXdwBrN
 of29pw8gTA0TVQSXemq0oLnMlEYzLd0ICG2SjSmJ/tWX0vXwjQl4fdDkqHwumPxo
 wyjVw744AuXy0WC7PZluQxadd0jEptAs7XSsYgTGOvececWtmZEJDzPGamfabhlX
 V6aHIqwVyDOGJXjQkUuaNuD5eO+afDwyaeVOla8YgE9ugwEs3xDXfHdks9nC8n4I
 OAk+hXfEBPpLQgItkP+Q3EnYIUJVh4ew5oWCHVfXM8ssKTH6bblWFVtJXP1eyC+0
 qkcHOHMR5oK4p+YAmRoRkeMG+Fe2pzT7dWOli4lPVXre1MAd/DQM5+NvgMaveW/E
 S8YHj5mRR7a13OAgOWtscjUz+hWE+WIBkCyFuo0w4+RMShKtsiuC+FJirsQpCxLp
 aFuwGG8ixT0F4WL/9Ao4iVmIOt15YIW3ND9ubHrPL2Ll0nGPwSmJSb+B7OgSFwqo
 G3r4/CSgwljeUq4FZox4
 =9Iuv
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v3.13/board-removal-signed-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

From Tony Lindgren:
Changes needed to drop legacy booting support for some
omap3 boards.

Note that that these are based on a merge of the
following for the dependencies:

- v3.12-rc5 for fixes to pinctrl mask
- omap-for-v3.13/dt-signed to avoid pointless merge conflicts
- omap-for-v3.13/quirk-signed for legacy pdata handling

* tag 'omap-for-v3.13/board-removal-signed-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (125 commits)
  ARM: OMAP2+: remove legacy support for IGEP boards
  ARM: OMAP2+: Remove legacy support for zoom platforms
  ARM: OMAP2+: Remove legacy booting support for omap3 EVM
  ARM: OMAP2: delete board-rm680
  ARM: dts: add minimal DT support for Nokia N950 & N9 phones
  ARM: dts: Add basic support for zoom3
  ARM: dts: Add basic support for TMDSEVM3730 (Mistral AM/DM37x EVM)
  ARM: dts: Add common support for omap3-evm
  ARM: dts: Shared file for omap GPMC connected smsc911x
  +Linux 3.12-rc5

Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-10-18 11:30:37 -07:00
Luis R. Rodriguez
03f27120fb cfg80211: export reg_initiator_name()
Drivers can now use this to parse the regulatory request and
be more verbose when needed.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-18 14:04:40 -04:00
John W. Linville
df3c2adea4 This is the first NFC pull request for the 3.13 kernel.
It's a fairly big one, with the following highlights:
 
 - NFC digital layer implementation: Most NFC chipsets implement the NFC
   digital layer in firmware, but others have more basic functionalities
   and expect the host to implement the digital layer. This layer sits
   below the NFC core.
 
 - Sony's port100 support: This is "soft" NFC USB dongle that expects the
   digital layer to be implemented on the host. This is the first user of
   our NFC digital stack implementation.
 
 - Secure element API: We now provide a netlink API for enabling,
   disabling and discovering NFC attached (embedded or UICC ones) secure
   elements. With some userspace help, this allows us to support NFC
   payments.
   Only the pn544 driver currently supports that API.
 
 - NCI SPI fixes and improvements: In order to support NCI devices over
   SPI, we fixed and improved our NCI/SPI implementation. The currently
   most deployed NFC NCI chipset, Broadcom's bcm2079x, supports that mode
   and we're planning to use our NCI/SPI framework to implement a
   driver for it.
 
 - pn533 fragmentation support in target mode: This was the only missing
   feature from our pn533 impementation. We now support fragmentation in
   both Tx and Rx modes, in target mode.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJSUqvzAAoJEIqAPN1PVmxKKHEP/1mK8kWx9ZZ8egkrkzaTw4lW
 J9uJq2kTGv5tfEfWjuigAhz5kHB6qLTJLx8FEBZAHazLfa4Az0Zm2G7I7+GTQAMV
 Mw+uAAI22GGnNgdTNzXDAqgS76Eul2PiWf2UwAbKFZWiyEj5Vf/eZBJAS9nTKLM3
 En37wBjvMpVgj6ZwOHKsqPR801NSa3HiM653tkmgSsk3QVL3b7s+kynSuAtshsmA
 twzymUoJFfYePVnQNRnT3PVPR6w0tRNs4vdq8j5UUuoj1vgKC0/h6nIz2aCURwyE
 j1pQlSy4ykASM8QZNI2jv3VaOFxmASig2GOgzvCeBZOmCBdlNq13ZY/T0SmmiYES
 LTbg6Pmh5BXID95GqcFcJaC+iS+QNZK+RWhNYmj+JWCuqZ9Qcja3++IoQ7m/pAip
 WfyQsO7lD7wPhXUu4IMxfyKNu8u4nCiHdBMp7TBVXiWIVUMxIcoM0auNW4O1qSvW
 eLq0f1oqQXE9hIrJ4oYUZmn9D5CKRLIXr9SVcmat+VxmV/+jFgV5cMQIGRdDAEUq
 4g5g7Avbpkkccn9wdFaIm0VpxMebaNFSWVfBOw4L7PF56lqns6shBcq3W3OvDf60
 /Tn0oe9Qqvr17xarJackFkF8beBkJaKOJv9M5+KjlVgGexcNMMTIiwj8aPl6+mqC
 t5n6tCp0g941jB3qAV2G
 =K1A5
 -----END PGP SIGNATURE-----

Merge tag 'nfc-next-3.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next

Samuel Ortiz <sameo@linux.intel.com> says:

"This is the first NFC pull request for the 3.13 kernel.
It's a fairly big one, with the following highlights:

- NFC digital layer implementation: Most NFC chipsets implement the NFC
  digital layer in firmware, but others have more basic functionalities
  and expect the host to implement the digital layer. This layer sits
  below the NFC core.

- Sony's port100 support: This is "soft" NFC USB dongle that expects the
  digital layer to be implemented on the host. This is the first user of
  our NFC digital stack implementation.

- Secure element API: We now provide a netlink API for enabling,
  disabling and discovering NFC attached (embedded or UICC ones) secure
  elements. With some userspace help, this allows us to support NFC
  payments.
  Only the pn544 driver currently supports that API.

- NCI SPI fixes and improvements: In order to support NCI devices over
  SPI, we fixed and improved our NCI/SPI implementation. The currently
  most deployed NFC NCI chipset, Broadcom's bcm2079x, supports that mode
  and we're planning to use our NCI/SPI framework to implement a
  driver for it.

- pn533 fragmentation support in target mode: This was the only missing
  feature from our pn533 impementation. We now support fragmentation in
  both Tx and Rx modes, in target mode."

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-18 13:59:28 -04:00
John W. Linville
b231070a18 Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next 2013-10-18 13:56:17 -04:00
David S. Miller
9aaf0435b4 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:

====================
1) Don't use a wildcard SA if a more precise one is in acquire state,
   from Fan Du.

2) Simplify the SA lookup when using wildcard source. We need to check
   only the destination in this case, from Fan Du.

3) Add a receive path hook for IPsec virtual tunnel interfaces
   to xfrm6_mode_tunnel.

4) Add support for IPsec virtual tunnel interfaces to ipv6.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-18 13:51:35 -04:00
Eric Dumazet
28be6e07e8 tcp: rename tcp_tso_segment()
Rename tcp_tso_segment() to tcp_gso_segment(), to better reflect
what is going on, and ease grep games.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-18 13:38:39 -04:00
Mark Brown
2a5e9dab9a Merge remote-tracking branch 'asoc/fix/rcar' into asoc-linus 2013-10-18 14:17:14 +01:00
Daniel Vetter
c75b505dda cpufreq: Add dummy cpufreq_cpu_get/put for CONFIG_CPU_FREQ=n
The drm/i915 driver wants to adjust it's own power policies using the
cpu policies as a guideline (we can implicitly boost the cpus through
the gpus on some platforms). To avoid a dreaded select (since a
depends will leave users wondering where where their driver has gone
too) add dummy functions.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: kbuild test robot <fengguang.wu@intel.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: cpufreq@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-18 15:05:29 +02:00
Ingo Molnar
0e95c69bde Merge branch 'rcu/next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu
Pull RCU updates from Paul E. McKenney.

Major changes:

" 1.	Update RCU documentation.  These were posted to LKML at
	http://article.gmane.org/gmane.linux.kernel/1566994.

  2.	Miscellaneous fixes.  These were posted to LKML at
	http://article.gmane.org/gmane.linux.kernel/1567027.

  3.	Grace-period-related changes, primarily to aid in debugging,
	inspired by a -rt debugging session.  These were posted to
	LKML at http://article.gmane.org/gmane.linux.kernel/1567076.

  4.	Idle entry/exit changes, primarily to address issues located
	by Tibor Billes.  These were posted to LKML at
	http://article.gmane.org/gmane.linux.kernel/1567096.

  5.	Code reorganization moving RCU's source files from kernel
	to kernel/rcu.  This was posted to LKML at
	http://article.gmane.org/gmane.linux.kernel/1577344."

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-18 12:46:14 +02:00
Marcel Holtmann
bdc3e0f1d2 Bluetooth: Move device_add handling into hci_register_dev
The device_add handling can be done directly in hci_register_dev and
device_remove within hci_unregister_dev.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-18 10:46:54 +03:00
Marcel Holtmann
b9ee0a783a Bluetooth: Add address type to device blacklist table
The device blacklist is not taking care of the address type. Actually
store the address type in the list entries and also use them when
looking up addresses in the table.

This is actually a serious bug. When adding a LE public address to
the blacklist, then it would be blocking a device on BR/EDR. And this
is not the expected behavior.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-18 10:21:28 +03:00
Chris Wilson
bc5bd37ce4 drm: Pad drm_mode_get_connector to 64-bit boundary
Pavel Roskin reported that DRM_IOCTL_MODE_GETCONNECTOR was overwritting
the 4 bytes beyond the end of its structure with a 32-bit userspace
running on a 64-bit kernel. This is due to the padding gcc inserts as
the drm_mode_get_connector struct includes a u64 and its size is not a
natural multiple of u64s.

64-bit kernel:

sizeof(drm_mode_get_connector)=80, alignof=8
sizeof(drm_mode_get_encoder)=20, alignof=4
sizeof(drm_mode_modeinfo)=68, alignof=4

32-bit userspace:

sizeof(drm_mode_get_connector)=76, alignof=4
sizeof(drm_mode_get_encoder)=20, alignof=4
sizeof(drm_mode_modeinfo)=68, alignof=4

Fortuituously we can insert explicit padding to the tail of our
structures without breaking ABI.

Reported-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-10-18 07:42:23 +01:00
Ben Hutchings
7cc7c5e54b net: Delete trailing semi-colon from definition of netdev_WARN()
Macro definitions should not normally end with a semi-colon, as this
makes it dangerous to use them an if...else statement.  Happily this
has not happened yet.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-18 00:13:21 -04:00
Eric Dumazet
400dfd3ae8 net: refactor sk_page_frag_refill()
While working on virtio_net new allocation strategy to increase
payload/truesize ratio, we found that refactoring sk_page_frag_refill()
was needed.

This patch splits sk_page_frag_refill() into two parts, adding
skb_page_frag_refill() which can be used without a socket.

While we are at it, add a minimum frag size of 32 for
sk_page_frag_refill()

Michael will either use netdev_alloc_frag() from softirq context,
or skb_page_frag_refill() from process context in refill_work()
 (GFP_KERNEL allocations)

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Michael Dalton <mwdalton@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-18 00:08:51 -04:00
Charles Keepax
a06ccd9c37 regulator: core: Add ability to create a lookup alias for supply
These patches add the ability to create an alternative device on which
a lookup for a certain supply should be conducted.

A common use-case for this would be devices that are logically
represented as a collection of drivers within Linux but are are
presented as a single device from device tree. It this case it is
necessary for each sub device to locate their supply data on the main
device.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-18 00:56:05 +01:00
Kuninori Morimoto
6833c452c2 ASoC: add snd_soc_of_get_dai_name() default of_xlate
Current snd_soc_of_get_dai_name() needs .of_xlate_dai_name()
callback on each component drivers.
But required behavior on almost all these drivers is
just returns its indexed driver's name.

This patch adds this feature as default behavior.
.of_xlate_dai_name() can overwrite it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-18 00:43:32 +01:00
David Cohen
40a96d54ee intel_mid: Move platform device setups to their own platform_<device>.* files
As Intel rolling out more SoC's after Moorestown, we need to
re-structure the code in a way that is backward compatible and easy to
expand. This patch implements a flexible way to support multiple boards
and devices.

This patch does not add any new functional support. It just refactors
the existing code to increase the modularity and decrease the code
duplication for supporting multiple soc's and boards.

Currently intel-mid.c has both board and soc related code in one file.
This patch moves the board related code to new files and let linker
script to create SFI devite table following this:

1. Move the SFI device specific code to
   arch/x86/platform/intel-mid/device-libs/platform_<device>.*
   A new device file is added for every supported device. This code will
   get conditionally compiled by using corresponding device driver
   CONFIG option.

2. Move the device_ids location to .x86_intel_mid_dev.init section by
   using new sfi_device() macro.

This patch was based on previous code from Sathyanarayanan Kuppuswamy.

Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: http://lkml.kernel.org/r/1382049336-21316-13-git-send-email-david.a.cohen@linux.intel.com
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-10-17 16:41:50 -07:00
Brian Austin
3d8c8bc025 ASoC: cs42l73: Add platform data support for cs42l73 codec
Add support for RST GPIO and Charge Pump Freq in platform data

Signed-off-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-18 00:37:29 +01:00
Nicolas Ferre
731d9cae02 tty/serial: at91: add a fallback option to determine uart/usart property
On older SoC, the "name" field is not filled in the register map.
Fix the way to figure out if the serial port is an uart or an usart for these
older products (with corresponding properties).

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-17 13:31:19 -07:00
David S. Miller
5cda73b68e Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next
John W. Linville says:

====================
This is a batch of updates intended for the 3.13 stream...

The biggest item of interest in here is wcn36xx, the new mac80211
driver for Qualcomm WCN3660/WCN3680 hardware.

Regarding the mac80211 bits, Johannes says:

"We have an assortment of cleanups and new features, of which the
biggest one is probably the channel-switch support in IBSS. Nothing
else really stands out much."

On top of that, the ath9k and rt2x00 get a lot of update action from
Felix Fietkau and Gabor Juhos, respectively.  There are a handful of
updates to other drivers here and there as well.

Please let me know if there are problems!
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-17 16:14:29 -04:00
Eric Dumazet
0baf2b35fc ipv4: shrink rt_cache_stat
Half of the rt_cache_stat fields are no longer used after IP
route cache removal, lets shrink this per cpu area.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-17 16:11:04 -04:00
Randy Dunlap
a5bb202b84 netdev: inet_timewait_sock.h missing semi-colon when KMEMCHECK is enabled
Fix (a few hundred) build errors due to missing semi-colon when
KMEMCHECK is enabled:

  include/net/inet_timewait_sock.h:139:2: error: expected ',', ';' or '}' before 'int'
  include/net/inet_timewait_sock.h:148:28: error: 'const struct inet_timewait_sock' has no member named 'tw_death_node'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-17 15:56:53 -04:00
Dan Carpenter
9e5f172190 yam: integer underflow in yam_ioctl()
We cap bitrate at YAM_MAXBITRATE in yam_ioctl(), but it could also be
negative.  I don't know the impact of using a negative bitrate but let's
prevent it.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-17 15:53:09 -04:00
Paul Durrant
82cada22a0 xen-netback: enable IPv6 TCP GSO to the guest
This patch adds code to handle SKB_GSO_TCPV6 skbs and construct appropriate
extra or prefix segments to pass the large packet to the frontend. New
xenstore flags, feature-gso-tcpv6 and feature-gso-tcpv6-prefix, are sampled
to determine if the frontend is capable of handling such packets.

Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-17 15:35:17 -04:00