Commit graph

79,477 commits

Author SHA1 Message Date
Johannes Berg
6ff57cf888 cfg80211/mac80211: clean up cfg80211 SME APIs
Do some cleanups in the cfg80211 SME APIs, which are
only used by mac80211.

Most of these functions get a frame passed, and there
isn't really any reason to export multiple functions
as cfg80211 can check the frame type instead, do that.

Additionally, the API functions have confusing names
like cfg80211_send_...() which was meant to indicate
that it sends an event to userspace, but gets a bit
confusing when there's both TX and RX and they're not
all clearly labeled.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-04 13:03:10 +02:00
Johannes Berg
51217cee3a Merge remote-tracking branch 'wireless-next/master' into HEAD
Merge to get the wil6210 changes that a cfg80211 change needs.
A conflict in drivers/net/wireless/ath/ath9k/init.c was just
whitespace changes.

Also fix a semantic conflict due to cw1200 using WoWLAN which
I had modified in my tree.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-04 13:02:42 +02:00
Felix Fietkau
d6d23de278 mac80211: add a tx control flag to indicate PS-Poll/uAPSD response
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-04 12:41:36 +02:00
Lee Jones
a7dacb68b3 dmaengine: ste_dma40: Allow memcpy channels to be configured from DT
At this moment in time the memcpy channels which can be used by the D40
are fixed, as each supported platform in Mainline uses the same ones.
However, platforms do exist which don't follow this convention, so
these will need to be tailored. Fortunately, these platforms will be DT
only, so this change has very little impact on platform data.

Cc: Dan Williams <djbw@fb.com>
Cc: Per Forlin <per.forlin@stericsson.com>
Cc: Rabin Vincent <rabin@rab.in>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-04 11:12:11 +02:00
Lee Jones
43f2e1a3be dmaengine: ste_dma40: Convert data_width from register bit format to value
When a DMA client requests and configures a DMA channel, it requests
data_width in Bytes. The DMA40 driver then swiftly converts it over to
the necessary register bit value. Unfortunately, for any subsequent
calculations we have to shift '1' by the bit pattern (1 << data_width)
times to make any sense of it.

This patch flips the semantics on its head and only converts the value
to its respective register bit pattern when writing to registers. This
way we can use the true data_width (in Bytes) value.

Cc: Dan Williams <djbw@fb.com>
Cc: Per Forlin <per.forlin@stericsson.com>
Cc: Rabin Vincent <rabin@rab.in>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-04 11:12:09 +02:00
Lee Jones
e7bab58b73 ARM: ux500: Remove recently unused stedma40_xfer_dir enums
We're now using the transfer direction definitions provided by the DMA
sub-system, so the home-brew ones have become obsolete.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-04 11:12:08 +02:00
Lee Jones
be2dbb09a0 usb: musb: ux500: move channel number knowledge into the driver
For all ux500 based platforms the maximum number of end-points are used.
Move this knowledge into the driver so we can relinquish the burden from
platform data. This also removes quite a bit of complexity from the driver
and will aid us when we come to enable the driver for Device Tree.

Cc: linux-usb@vger.kernel.org
Acked-by: Felipe Balbi <balbi@ti.com>
Acked-by: Fabio Baltieri <fabio.baltieri@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-04 11:12:02 +02:00
Amos Kong
6ea34c9b78 kvm: exclude ioeventfd from counting kvm_io_range limit
We can easily reach the 1000 limit by start VM with a couple
hundred I/O devices (multifunction=on). The hardcode limit
already been adjusted 3 times (6 ~ 200 ~ 300 ~ 1000).

In userspace, we already have maximum file descriptor to
limit ioeventfd count. But kvm_io_bus devices also are used
for pit, pic, ioapic, coalesced_mmio. They couldn't be limited
by maximum file descriptor.

Currently only ioeventfds take too much kvm_io_bus devices,
so just exclude it from counting kvm_io_range limit.

Also fixed one indent issue in kvm_host.h

Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-06-04 11:49:38 +03:00
Kent Overstreet
215e262f2a percpu: implement generic percpu refcounting
This implements a refcount with similar semantics to
atomic_get()/atomic_dec_and_test() - but percpu.

It also implements two stage shutdown, as we need it to tear down the
percpu counts.  Before dropping the initial refcount, you must call
percpu_ref_kill(); this puts the refcount in "shutting down mode" and
switches back to a single atomic refcount with the appropriate
barriers (synchronize_rcu()).

It's also legal to call percpu_ref_kill() multiple times - it only
returns true once, so callers don't have to reimplement shutdown
synchronization.

[akpm@linux-foundation.org: fix build]
[akpm@linux-foundation.org: coding-style tweak]
Signed-off-by: Kent Overstreet <koverstreet@google.com>
Cc: Zach Brown <zab@redhat.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Asai Thambi S P <asamymuthupa@micron.com>
Cc: Selvan Mani <smani@micron.com>
Cc: Sam Bradshaw <sbradshaw@micron.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Reviewed-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Tejun Heo <tj@kernel.org>
2013-06-03 15:36:41 -07:00
Stephen Rothwell
40b313608a Finally eradicate CONFIG_HOTPLUG
Ever since commit 45f035ab9b ("CONFIG_HOTPLUG should be always on"),
it has been basically impossible to build a kernel with CONFIG_HOTPLUG
turned off.  Remove all the remaining references to it.

Cc: Russell King <linux@arm.linux.org.uk>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03 14:20:18 -07:00
K. Y. Srinivasan
98b80d8938 Drivers: hv: Add the GUID fot synthetic fibre channel device
In preparation for supporting synthetic Fiber Channel device, add the GUID for
this service.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03 14:09:14 -07:00
K. Y. Srinivasan
e68d2971d2 Drivers: hv: vmbus: Implement multi-channel support
Starting with Win8, the host supports multiple sub-channels for a given
device. As in the past, the initial channel offer specifies the device and
is associated with both the type and the instance GUIDs. For performance
critical devices, the host may support multiple sub-channels. The sub-channels
share the same type and instance GUID as the primary channel. The number of
sub-channels offerrred to the guest depends on the number of virtual CPUs
assigned to the guest. The guest can request the creation of these sub-channels
and once created and opened, the guest can distribute the traffic across all
the channels (the primary and the sub-channels). A request sent on a sub-channel
will have the response delivered on the same sub-channel.

At channel (sub-channel) creation we bind the channel interrupt to a CPU and
with this sub-channel support we will be able to spread the interrupt load
of a given device across all available CPUs.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03 14:09:14 -07:00
Libo Chen
9447057eaf platform_device: use a macro instead of platform_driver_register
I found a lot of mistakes using struct platform_driver without owner
so I make a macro instead of the function platform_driver_register.
It can set owner in it, then guys don`t care about module owner again.

Signed-off-by: Libo Chen <libo.chen@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03 13:59:03 -07:00
Seth Jennings
3a76e5e09f debugfs: add get/set for atomic types
debugfs currently lack the ability to create attributes
that set/get atomic_t values.

This patch adds support for this through a new
debugfs_create_atomic_t() function.

Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03 13:55:01 -07:00
John W. Linville
133eb82f09 Merge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next 2013-06-03 15:55:37 -04:00
Solomon Peachy
4da2a54a84 cw1200: rename the cw1200 platform definition header
My previous patch just moved the file, but it also needed to be renamed
to conform to proper conventions.

Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-03 15:54:56 -04:00
Solomon Peachy
7c0b6f49db cw1200: Rework SDIO platform support to prevent build problems.
Based on discussions with And Bergmann, this patch changes the SDIO
platform code to default to supporting the Sagrad devices, allowing for
it to be overridden in board setup code.  This renders the cw1200_sagrad
module suplerflous, so it is now removed.

It also moves the documentation that was in the cw1200_sagrad source to
the platform header.

Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-03 15:54:55 -04:00
Solomon Peachy
6dd64a304e cw1200: Replace use of 'struct resource' with 'int' for GPIO fields.
The only advantage of 'struct resource' is that it lets us assign names
as part of the platform data.  Unfortunately since we are using platform
data, we are already limited to a single instance of each driver,
rendering this moot.

So, replace the struct resources with ints, resulting in cleaner code.

This was based on a suggestion from Arnd Bergmann.

Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-03 15:54:55 -04:00
Solomon Peachy
c992219825 cw1200: move platform_data header to correct location.
(As suggested by Arnd Bergmann)

Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-03 15:54:54 -04:00
Rafael J. Wysocki
45f0a85c82 PM / Runtime: Rework the "runtime idle" helper routine
The "runtime idle" helper routine, rpm_idle(), currently ignores
return values from .runtime_idle() callbacks executed by it.
However, it turns out that many subsystems use
pm_generic_runtime_idle() which checks the return value of the
driver's callback and executes pm_runtime_suspend() for the device
unless that value is not 0.  If that logic is moved to rpm_idle()
instead, pm_generic_runtime_idle() can be dropped and its users
will not need any .runtime_idle() callbacks any more.

Moreover, the PCI, SCSI, and SATA subsystems' .runtime_idle()
routines, pci_pm_runtime_idle(), scsi_runtime_idle(), and
ata_port_runtime_idle(), respectively, as well as a few drivers'
ones may be simplified if rpm_idle() calls rpm_suspend() after 0 has
been returned by the .runtime_idle() callback executed by it.

To reduce overall code bloat, make the changes described above.

Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Kevin Hilman <khilman@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
2013-06-03 21:49:52 +02:00
Bjorn Helgaas
278934bdc4 Merge branch 'pci/jiang-remove-global-list' into next
* pci/jiang-remove-global-list:
  PCI/ACPI: Use dev_printk(), acpi_handle_print(), pr_xxx() when possible
  PCI/ACPI: Remove unused global list acpi_pci_roots
  PCI/ACPI: Introduce "handle" local for economy of expression
  PCI/ACPI: Combine duplicate adjacent "if" tests
2013-06-03 13:43:26 -06:00
Philipp Zabel
8b94ca61d7 [media] v4l2-mem2mem: add v4l2_m2m_create_bufs helper
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-03 15:51:11 -03:00
Shane Huang
6d481e2fd1 PCI: Put Hudson-2 device IDs together
To put all AMD Hudson-2 device IDs together for better maintenance.

[bhelgaas: also sort Hudson-2 devices by ID]
Signed-off-by: Shane Huang <shane.huang@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
Acked-by: Jean Delvare <khali@linux-fr.org>
2013-06-03 12:35:20 -06:00
Thomas Pugliese
1a81f8814c Allow the USB HCD to create Wireless USB root hubs
This patch adds Wireless USB root hub support to the USB HCD.  It allows
the HWA to create its root hub which previously failed because the HCD
treated wireless root hubs the same as USB2 high speed hubs.  The creation
of the root hub would fail in that case due to lack of TTs which wireless
root hubs do not support.

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03 10:52:40 -07:00
Johannes Berg
964dc9e2c3 cfg80211: take WoWLAN support information out of wiphy struct
There's no need to take up the space for devices that don't
support WoWLAN, and most drivers can even make the support
data static const (except where it's modified at runtime.)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-03 18:43:34 +02:00
Jacob Minshall
e05ecccdf7 mac80211: set mesh formation field properly
Cap max peerings at 63 in accordance with IEEE-2012 8.4.2.100.7.
Triggers a beacon regeneration every time the number of peerings changes.
Previously this would only happen if the "accepting peerings" bit changed.

Signed-off-by: Jacob Minshall <jacob@cozybit.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-03 17:03:18 +02:00
MyungJoo Ham
de9c739435 PM / devfreq: add comments and Documentation
- Added missing ABI documents
- Added comments to clarify the objectives of functions

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Acked-by: Nishanth Menon <nm@ti.com>
Acked-by: Rajagopal Venkat <rajagopal.venkat@linaro.org>
2013-06-03 20:20:29 +09:00
Linus Torvalds
286e050bc0 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
 "Recent bug fixes, one of them touches a common code file.

  It adds two #ifndef/#endif pairs to asm-generic/io.h to be able to
  override xlate_dev_kmem_ptr and xlate_dev_mem_ptr."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/pgtable: Fix gmap notifier address
  s390/dasd: fix handling of gone paths
  s390/pgtable: Fix check for pgste/storage key handling
  arch: s390: appldata: using strncpy() and strnlen() instead of sprintf()
  s390/smp: lost IPIs on cpu hotplug
  kernel: Fix s390 absolute memory access for /dev/mem
  s390/dma: do not call debug_dma after free
2013-06-03 18:04:07 +09:00
Linus Torvalds
7d80fea426 Merge branch 'for-3.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:

 - Fix for yet another xattr bug which may lead to NULL deref.

 - A subtle bug in for_each_descendant_pre().  This bug requires quite
   specific conditions to trigger and isn't too likely to actually
   happen in the wild, but maybe that just makes it that much more
   nastier.

 - A warning message added for silly cgroup re-mount (not -o remount,
   but unmount followed by mount) behavior.

* 'for-3.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: warn about mismatching options of a new mount of an existing hierarchy
  cgroup: fix a subtle bug in descendant pre-order walk
  cgroup: initialize xattr before calling d_instantiate()
2013-06-03 17:57:16 +09:00
Steffen Trumtrar
267fdd92bb video: display_timing: add doubleclk flag
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-03 18:42:32 +10:00
Timo Teräs
5aad1de5ea ipv4: use separate genid for next hop exceptions
commit 13d82bf5 (ipv4: Fix flushing of cached routing informations)
added the support to flush learned pmtu information.

However, using rt_genid is quite heavy as it is bumped on route
add/change and multicast events amongst other places. These can
happen quite often, especially if using dynamic routing protocols.

While this is ok with routes (as they are just recreated locally),
the pmtu information is learned from remote systems and the icmp
notification can come with long delays. It is worthy to have separate
genid to avoid excessive pmtu resets.

Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-03 00:07:43 -07:00
Eric Dumazet
01cb71d2d4 net_sched: restore "overhead xxx" handling
commit 56b765b79 ("htb: improved accuracy at high rates")
broke the "overhead xxx" handling, as well as the "linklayer atm"
attribute.

tc class add ... htb rate X ceil Y linklayer atm overhead 10

This patch restores the "overhead xxx" handling, for htb, tbf
and act_police

The "linklayer atm" thing needs a separate fix.

Reported-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vimalkumar <j.vimal@gmail.com>
Cc: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-02 22:22:35 -07:00
Eric Dumazet
c87a124a5d net: force a reload of first item in hlist_nulls_for_each_entry_rcu
Roman Gushchin discovered that udp4_lib_lookup2() was not reloading
first item in the rcu protected list, in case the loop was restarted.

This produced soft lockups as in https://lkml.org/lkml/2013/4/16/37

rcu_dereference(X)/ACCESS_ONCE(X) seem to not work as intended if X is
ptr->field :

In some cases, gcc caches the value or ptr->field in a register.

Use a barrier() to disallow such caching, as documented in
Documentation/atomic_ops.txt line 114

Thanks a lot to Roman for providing analysis and numerous patches.

Diagnosed-by: Roman Gushchin <klamm@yandex-team.ru>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Boris Zhmurov <zhmurov@yandex-team.ru>
Signed-off-by: Roman Gushchin <klamm@yandex-team.ru>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-02 20:53:59 -07:00
Rafael J. Wysocki
aba6efc471 Memory hotplug: Move alternative function definitions to header
Move the definitions of offline_pages() and remove_memory()
for CONFIG_MEMORY_HOTREMOVE to memory_hotplug.h, where they belong,
and make them static inline.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-06-01 22:24:07 +02:00
Bob Moore
67a9277496 ACPICA: Update version to 20130418
Version 20130418.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Acked-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-06-01 21:54:31 +02:00
Lv Zheng
d835e7f4f8 ACPICA: Remove unused macros, no functional change
Remove several unused/duplicated macros in acoutput.h Lv Zheng.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Acked-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-06-01 21:54:31 +02:00
Bob Moore
29a241cc02 ACPICA: Add argument typechecking for all predefined ACPI names
Fully implements typechecking on all incoming arguments for all
predefined names. This ensures that ACPI-related drivers are
passing the correct number of arguments, each of the correct
object type.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Acked-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-06-01 21:54:30 +02:00
Rafael J. Wysocki
242831eb15 Memory hotplug / ACPI: Simplify memory removal
Now that the memory offlining should be taken care of by the
companion device offlining code in acpi_scan_hot_remove(), the
ACPI memory hotplug driver doesn't need to offline it in
remove_memory() any more.  Moreover, since the return value of
remove_memory() is not used, it's better to make it be a void
function and trigger a BUG() if the memory scheduled for removal is
not offline.

Change the code in accordance with the above observations.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Toshi Kani <toshi.kani@hp.com>
2013-06-01 21:37:10 +02:00
Rafael J. Wysocki
ea50be5934 Driver core / MM: Drop offline_memory_block()
Since offline_memory_block(mem) is functionally equivalent to
device_offline(&mem->dev), make the only caller of the former use
the latter instead and drop offline_memory_block() entirely.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Toshi Kani <toshi.kani@hp.com>
2013-06-01 21:37:10 +02:00
Rafael J. Wysocki
2e199192df ACPI: Drop removal_type field from struct acpi_device
The ACPI processor driver was the only user of the removal_type
field in struct acpi_device, but it doesn't use that field any more
after recent changes.  Thus, removal_type has no more users, so drop
it along with the associated data type.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
2013-06-01 21:37:09 +02:00
Rafael J. Wysocki
b2c064b25a Driver core / memory: Simplify __memory_block_change_state()
As noted by Tang Chen, the last_online field in struct memory_block
introduced by commit 4960e05 (Driver core: Introduce offline/online
callbacks for memory blocks) is not really necessary, because
online_pages() restores the previous state if passed ONLINE_KEEP as
the last argument.  Therefore, remove that field along with the code
referring to it.

References: http://marc.info/?l=linux-kernel&m=136919777305599&w=2
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Tang Chen <tangchen@cn.fujitsu.com>
2013-06-01 21:37:09 +02:00
Stephen Warren
eca8960a8e spi: fix incorrect handling of min param in SPI_BPW_RANGE_MASK
SPI_BPW_RANGE_MASK is intended to work by calculating two masks; one
representing support for all bits up-to-and-including the "max" supported
value, and one representing support for all bits up-to-but-not-including
the "min" supported value, and then taking the difference between the
two, resulting in a mask representing support for all bits between
(inclusive) the min and max values.

However, the second mask ended up representing all bits up-to-and-
including rather up-to-but-not-including. Fix this bug.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-01 19:46:16 +01:00
Stephen Warren
4dd9572abc spi: fix undefined behaviour in SPI_BPW_RANGE_MASK
The parameters to SPI_BPW_RANGE_MASK() are in the range 1..32. If 32 is
used as a parameter, part of the expression is "1 << 32". Since 32 is >=
the size of the type in use, such a shift is undefined behaviour. Add
macro SPI_BIT_MASK to Implement a special case and thus avoid undefined
behaviour. Use this new macro rather than BIT() when implementing
SPI_BPW_RANGE_MASK().

This fixes build warnings such as:
drivers/spi/spi-gpio.c:446:2: warning: left shift count >= width of type [enabled by default]

SPI_BPW_MASK() already avoids this, since its parameter is also in range
1..32, yet it only shifts by up to one less than the input parameter.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-01 19:46:16 +01:00
Mark Brown
2da1c4bf76 ASoC: wm8994: Allow debounce before MICDET identification
For systems which do not have a jack detection feature allow some debounce
to be specified before we perform accessory identification, improving
robustness without impacting button detection responsiveness.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-06-01 19:28:58 +01:00
Linus Torvalds
008bd2de94 Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
Pull scsi target fixes from Nicholas Bellinger:
 "The highlights include:

   - Re-instate sess->wait_list in target_wait_for_sess_cmds() for
     active I/O shutdown handling in fabrics using se_cmd->cmd_kref
   - Make ib_srpt call target_sess_cmd_list_set_waiting() during session
     shutdown
   - Fix FILEIO off-by-one READ_CAPACITY bug for !S_ISBLK export
   - Fix iscsi-target login error heap buffer overflow (Kees)
   - Fix iscsi-target active I/O shutdown handling regression in
     v3.10-rc1

  A big thanks to Kees Cook for fixing a long standing login error
  buffer overflow bug.

  All patches are CC'ed to stable with the exception of the v3.10-rc1
  specific regression + other minor target cleanup."

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  iscsi-target: Fix iscsit_free_cmd() se_cmd->cmd_kref shutdown handling
  target: Propigate up ->cmd_kref put return via transport_generic_free_cmd
  iscsi-target: fix heap buffer overflow on error
  target/file: Fix off-by-one READ_CAPACITY bug for !S_ISBLK export
  ib_srpt: Call target_sess_cmd_list_set_waiting during shutdown_session
  target: Re-instate sess_wait_list for target_wait_for_sess_cmds
  target: Remove unused wait_for_tasks bit in target_wait_for_sess_cmds
2013-06-01 20:05:20 +09:00
Linus Torvalds
c361cb59ac fbdev: fixes for 3.10-rc4
This contains some small fixes
 
 Atmel LCDC: fix blank the backlight on remove
 ps3fb: fix compile warning
 OMAPDSS: Fix crash with DT boot
 
 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIbBAABAgAGBQJRqPk4AAoJEOrjwV5ZMRf2N10P+NXJl0gllH/aVmLv46/nkOKi
 lO5PPxmswJzxYJZe/fl6nodbDIUlPisjl5y5KSBNzsXoKMyCxGvWdUvNt3DgcDqs
 n+VunNAcbh9/8kcUe9cIRbFYIX15XtxKCJbXUoXqwLnnfFwXbXfy/AnnlkdIOeNO
 0qyK+M0bJ3Y5s4dWYrfhU+yPxek2908agEamhAROn0rgzZD54h3mUrNPp15Hmc0a
 JFrUrKzrjX8TY804bw873Y7RmLpERXU8yXaZdW01MxDE2r2RfJrp90eEzCfjdjJD
 OpC4liPO87+vPwtremSzj2b/LojWdbZ+a08s4SZ+798J+Gbg/YCRIm3JrFXJsHvJ
 kMGMVEciew+gVnGYdrs2CAeiN1xPZpF1NRv8tMLFhTieFHKw7NupIHG5o4MX7/9n
 Bv64+SYt6ox3U1dZlRdQOzjlt3yo1hT8qyQBvKgz0icEnW/ZV0d4oYFfDG7WyHgi
 4pxOw8r96KtxpS/ZN//cu4oygGRf1EL3hHiaguJI4V4fSiEwaEL6uUgK9RFINLnJ
 5RhyoQeRATKXlgadzbOHFssJsECSTtszgsWmY/xe2F9uDdDSucTo9bRo+4re7QG0
 6l986FHJou22nolAGisjpLei11ESlba4VvCv8H6ej3MaKGRjJEYQ4s/uguJ2pMti
 wuhoEB0/UjOs5ZzCI+0=
 =tjLq
 -----END PGP SIGNATURE-----

Merge tag 'fbdev-for-3.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/plagnioj/linux-fbdev

Pull fbdev fixes from Jean-Christophe PLAGNIOL-VILLARD:
 "This contains some small fixes

   - Atmel LCDC: fix blank the backlight on remove
   - ps3fb: fix compile warning
   - OMAPDSS: Fix crash with DT boot"

* tag 'fbdev-for-3.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/plagnioj/linux-fbdev:
  atmel_lcdfb: blank the backlight on remove
  trivial: atmel_lcdfb: add missing error message
  OMAPDSS: Fix crash with DT boot
  fbdev/ps3fb: fix compile warning
2013-06-01 19:53:41 +09:00
Olof Johansson
fc20c6ffdd Big DT-centric update for AT91:
- Calao boards update, removal of one board C file and
   associated defconfig, Kconfig Makefile lines
 - several Acme boards updates
 - addition of watchdog, uart and pinctrl descriptions for
   several products
 - modification of RTC compatible string for 9x5 family
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJRqRD8AAoJEAf03oE53VmQDXsIAI9uZ9Lrf3Hi5srFxMeDnJxD
 LysPAz0BW+8XSC5CHCWhu8JxLtUnZy4y4yice/y2Uol0rzqb8gR40DRym/mHJF6t
 zGRitG553zYe53rVGjOBX/e2sY+vhhm2slOdpxH5aB8ZES3WJxKYddqdvHhcwW3J
 gzBP1S10mwspEuA7vQ+1r9k4WoGis7WVK1HLghga1yb4C/B5yFNhujZz3wweIIaw
 eep55SDPiJhtVzlLOZOsVh3TZuSStyElfJTPk+UkFnz2QU1D7mJri55rPT121iGN
 Vfc4NDAOyirOGTbSzY2cKSB53To8fipHRL0NzICCifkMuVzA2RWl13jOL/jo9QU=
 =6Cw/
 -----END PGP SIGNATURE-----

Merge tag 'at91-dt' of git://github.com/at91linux/linux-at91 into next/dt

From Nicolas Ferre:

Big DT-centric update for AT91:
- Calao boards update, removal of one board C file and
  associated defconfig, Kconfig Makefile lines
- several Acme boards updates
- addition of watchdog, uart and pinctrl descriptions for
  several products
- modification of RTC compatible string for 9x5 family

* tag 'at91-dt' of git://github.com/at91linux/linux-at91: (21 commits)
  ARM: at91/dt: add pinctrl definition for at91 tc blocks
  ARM: at91/dts: add the watchdog nodes for at91 boards
  ARM: at91/dtsi: add the watchdog nodes for at91 SoC
  ARM: at91: drop non DT: Calao USB-A96x
  ARM: at91: dt: add Calao USB-A9G20 low power version
  ARM: at91: dt: usb-a9263: add dataflash support
  ARM: at91: dt: usb-a9263: update shutdown controller
  ARM: at91: dt: usb-a9260: update shutdown controller
  ARM: at91: dt: sam9260: add i2c gpio pinctrl
  ARM: at91: switch Fox G20 board .dts to pre-processor defines
  ARM: at91: add Acme Systems Fox G20 board
  ARM: at91/at91-ariag25.dts: UART0/1 nodes are disabled
  ARM: at91/at91sam9x5.dtsi: add UART0/1 nodes
  ARM: at91/at91-ariag25.dts: add RTC node
  ARM: at91: at91sam9x5 RTC is not compatible with at91rm9200 one
  ARM: at91: udpate defconfigs
  ARM: at91: dt: switch to standard IRQ flag defines
  ARM: at91: dt: switch to pinctrl to pre-processor
  ARM: at91: dt: add pinctrl pre-processor define
  ARM: at91: dt: switch to standard GPIO flag defines.
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-01 00:38:04 -07:00
Olof Johansson
db9bde2fa5 Merge branch 'VExpress_DCSCB' of git://git.linaro.org/people/nico/linux into next/soc
From Nicolas Pitre:

This is the first MCPM backend submission for VExpress running on RTSM
aka Fast Models implementing the big.LITTLE system architecture.  This
enables SMP secondary boot as well as CPU hotplug on this platform.

A big prerequisite for this support is the CCI driver from Lorenzo
included in this pull request.

Also included is Rob Herring's set_auxcr/get_auxcr allowing nicer code.

Signed-off-by: Olof Johansson <olof@lixom.net>

* 'VExpress_DCSCB' of git://git.linaro.org/people/nico/linux:
  ARM: vexpress: Select multi-cluster SMP operation if required
  ARM: vexpress/dcscb: handle platform coherency exit/setup and CCI
  ARM: vexpress/dcscb: do not hardcode number of CPUs per cluster
  ARM: vexpress/dcscb: add CPU use counts to the power up/down API implementation
  ARM: vexpress: introduce DCSCB support
  ARM: introduce common set_auxcr/get_auxcr functions
  drivers/bus: arm-cci: function to enable CCI ports from early boot code
  drivers: bus: add ARM CCI support
2013-05-31 23:39:35 -07:00
Olof Johansson
85b9174fda mvebu clock restructuring for v3.11
- clk: mvebu
     - reorganize by SoC to remove built up #ifdefs
     - add clk flags per clock gate
 
 Note: this branch only depends on mvebu/pcie in order to prevent managing a
 tricky modify/remove file merge conflict.  By rebasing on mvebu/pcie, we are
 able to build the resolution into the patch series.  The change is small, and
 has been tested by the respective authors.
 
 depends:
  - mvebu/pcie
     - mvebu/of_pci
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQEcBAABAgAGBQJRplb0AAoJEAi3KVZQDZAefTAH/1PMcXV+N/9HUgmx9XNpWg7Z
 3ODWrA7Ewdvq9hfv9t+EH0FIdrZRA400p+AJuWSUuLzS7NzmCMTk/Pzad/W36ZY2
 +8yJXVThSHqEQN/Vi1FtZGTKqRXZX/udVH5oNFV9jrUEFvLwuI/6/hCdkzlFKEol
 9YJHNUyiul9P0jpcDXSSTFCpNXUPgQPuGTtIip0TKFmZOdA2QglgQAVkIwACZ+uX
 PA7ewiFj1yfOhv8eh+nnb5kAsJEj1ynfMJywn7P/OC6ugAJtE9D0ZpzlYuj3lFEo
 Z2snnzU7wVARfp1i6x3kNUyBiGHnJfxJC1KMePj87XP80BVzX1rmCoFY6x9nutg=
 =jIi7
 -----END PGP SIGNATURE-----

Merge tag 'seb_clk-3.11' of git://git.infradead.org/users/jcooper/linux into next/soc

From Jason Cooper:
mvebu clock restructuring for v3.11

 - clk: mvebu
    - reorganize by SoC to remove built up #ifdefs
    - add clk flags per clock gate

* tag 'seb_clk-3.11' of git://git.infradead.org/users/jcooper/linux:
  clk: mvebu: disintegrate obsolete file
  ARM: mvebu: move DT boards to SoC-centric clock init
  ARM: kirkwood: move DT boards to SoC-centric clock init
  ARM: dove: move DT boards to SoC-centric clock init
  clk: mvebu: add Armada XP SoC-centric clock init
  clk: mvebu: add Armada 370 SoC-centric clock init
  clk: mvebu: add Kirkwood SoC-centric clock init
  clk: mvebu: add Dove SoC-centric clock init
  clk: mvebu: add common clock functions for core clk and clk gating
  clk: mvebu: introduce per-clock-gate flags
2013-05-31 23:23:25 -07:00
Olof Johansson
a640874bb6 mvebu pcie driver for v3.11 (round 2, bugfix)
- mvebu pcie
     - fix return value check in mvebu_pcie_probe()
 
 depends
  - mvebu/of_pci
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQEcBAABAgAGBQJRpPzyAAoJEAi3KVZQDZAeuf0H/2FsmnLgvJh24z1B1HLuWm52
 TYgoORahPsuoP7L2RZBU6n3++UuX4NGbVcagqRDe1Asou0oG0fu6oXbdn0d4avff
 hoIuRq3LWhQ6DYaeV34vV8vM8x79HYM7FT92zX7VZKJ6TL6KGSHHSvVKhqWo7y65
 ++Ogtl5hzjyMzcQo5LoDQ+bqVLZpbfF7D/dreCCzzmlODqCNZGoBeZOwTqyR9kDW
 aO65yDcsFIky2YAGz+uT0ItNpAtGzshJU/d6QTHNlvKeae2NjMqv2X7hP4161uQ4
 NGyCsm7Aif5WnBQGQsvgCIPnuxTaYaGOSZQLMG7pN7TJQgx0sgF93HmX/gUI/WQ=
 =ye72
 -----END PGP SIGNATURE-----

Merge tag 'pcie-3.11-2' of git://git.infradead.org/users/jcooper/linux into next/soc

PCI-e driver for mvebu.

* tag 'pcie-3.11-2' of git://git.infradead.org/users/jcooper/linux:
  pci: mvebu: fix return value check in mvebu_pcie_probe()
  arm: mvebu: PCIe support is now available on mvebu
  pci: PCIe driver for Marvell Armada 370/XP systems
  clk: mvebu: add more PCIe clocks for Armada XP
  clk: mvebu: create parent-child relation for PCIe clocks on Armada 370
  of/pci: Add of_pci_parse_bus_range() function
  of/pci: Add of_pci_get_devfn() function
  of/pci: Provide support for parsing PCI DT ranges property

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-05-31 23:13:24 -07:00